ADDN ALTN OF EXISTING BLDG NO P-11 GROUND FLOOR WITH COOK HOUSE AT BAGJOLA ARMY CAMP UNDER GE (N) KOLKATA

Amount

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

Material and labour for brickwork with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius in half brick thick wall built in CM (1:4) complete all as specified and directed.

Demolition of reinforced cement concrete of roofs, floors , staircases, landing, chajjas and similar suspended works in ground floors beams (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

Demolition of reinforced cement concrete of roofs, floors, (other than gorund floors) beams, staircases, landing, chajjas and similar suspended works (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

Material and labour for RCC (1:1.5:3) type A1 (using 20mm graded stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies canopies, deck slabs and in shelves and the like complete all as specified and directed. Note: Reinforcement and formwork shall be measured and paid separately.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work; not exceeding 200mm thick ( horizontal or sloping) complete all as specified and directed.

M&L for formwork to edges of concrete flats, treads, breaks in floor, window cills, concrete railings and similar work; exc 5cm but not exc 10cm wide, complete all as specified and directed.

Material and labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending lapping etc as required and welding with existing bar complete all as specified and as directed.

Material and labour for TMT bars 6 to 8mm bar, cut to length, bent to shape required, including cranking, bending, lapping etc as required and welding with existing bar complete all as specified and as directed.

Taking down chowkahts or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and directed.

Taking down chowkahts or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.

Refixing of shutters of any description exceeding 1 Sqm each and not exceeding 2 Sqm with old serviceable builders hard ware articles / with new builders hard ware articles if any complete all as specified and directed. (Old serviceable shutter obtained from item No 13 above shall be reused).

Supply and fix 35mm thick 2nd class hard wood factory made plain framed panelled door shutters, (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneered on both faces and rail and stiles as per IS 1003(Pt-I), kiln seasoned and chemically pressure treated etc. complete all as specified and directed.

Supply and fix 35mm thick 2nd class Hard wood factory made glazed and skeleton door shutters, open rebated and prepared to received glass/ gauge etc (without sash bars) edges of framing plain, chamfered or rounded and mitred, beads for securing glass etc. the size of member of shutter as specified in SSR Part-I, clause 8.24 (a) complete all as specified and directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube with EPDM gasket as per specification and drawing complete all as specified and directed.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification and drawing complete all as specified and directed.

Supply and fix factory made solid PVC moulded door shutter 28 to 30 mm thick (stiles)with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on back face with particle board core, supplying and fixing frame at site as per specification and drawing complete all as specified and directed.

Material and labour for PCC (1:3:6) type C-0 (using 12.5 mm graded stone aggregates) for fixing of hold fasts block and similar work including necessary form work complete all as specified & directed.

Supply and fix mild steel work as in holdfast or similar article conforming to Fe-410-0 or Fe-310-0 including tarring and sanding complete all as specified and directed.

Supply and fix 100 mm size butt hinges, medium weight, stainless steel and fixed complete all as specified and directed.

Supply and fix 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

Supply and fix 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

Supply and fix 150mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and directed.

Supply and fix powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Supply and fix aluminium powder coated glazed or gauged shutter for sliding window (2 or 3 track) with aluminium channel section weighing not less than 0.55 kg per sqm including aluminium channel,including all necessary fittings such as rollar, joining cleats, glazing clips, rubber packing aluminium screw as required etc complete all as specified and as directed. (Note:Wiremess/ glass shall be measured and paid separately)

Supply and fix powder coated anodised aluminium glass louver /ventilators with blades of 10mm heavy duty with lever handle etc. complete all as specified and directed. (Note- Glass shall be measured and paid separately)

Supply and fix 3mm thick frosted glass ordinary quality, glazing with oil putty in square not exceeding 0.5 Sqm in each pane fixed to steel frame complete all as specified and as directed.

Supply and fix stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fix 3mm thick sheet glass in repairs of ordinary quality and glazing with oil putty/ wooden beadings in square n. exc 0.5 sq.m in each pane and complete all as specified and directed.

Supply and fix in repair stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and directed.

Supply and fix in repair 3mm thick sheet glass of ordinary quality and glazing with oil putty in square n. exc 0.5 sq. m in each pane and complete all as specified and directed.

Supply and fix 2nd class hard wood, plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

Materials and labour for treating back of chowkhats etc. with tar or coal tar black paint, area tarred exceeding 0.10 sqm but not exceeding 0.50 sqm each complete all as specified and directed.

Material and labour for 2nd class hard wood sectional area exc 6 sqcm & n.exc 13 sqcm , plain, fillets, square, rectangular or triangular in section ,clean sawn, bull nosed ,chamfered or rounded on one edge or face secured with nails/ screw complete all as specified and directed.

Material and labour for 2nd class hard wood sectional area exc 3 sqcm & n.exc 6 sqcm, plain, fillets, square, rectangular or triangular in section, clean sawn, bull nosed ,chamfered or rounded on one edge or face secured with nails/ screw complete all as specified and directed.

Supply and fix in repair pre-laminated particle board 18/19 mm thick, interior grade one side decorative choice lamination and other side balancing white lamination fixed in cup boards shutters with 6mm thick teak wood lipping/ edging all round complete all as specified and directed.

S&F 30mm width stainless steel Continous (piano) hinges, bright finish complete all as specified and directed.

Supply and fix 100mm aluminium anodised hasp and staple including bolt to hinge plate and fixed with screw complete all as specified and directed.

Supply and fix 100mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Material and labour for 20mm thick plaster in cement mortar (1:4) in two layers, i.e 10mm thick in each layer, top layer mixed with integral water proofing liquid admixture as per manufacturers instruction on brick or concrete surfaces of wall finished the surface fair and even complete all as specified and directed. Note :- WPC shall be measured and paid separately.

Supply only integral water proofing liquid admixture for concrete and mortar complete all as specified and directed. (Make :CONPLAST X421IC of Fosroc /SIKA No 1 of SIKA/equivalent brand of PIDILITE)

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for 5 mm thick plastering in CM (1:3) on concrete surfaces as in sides of column, lintel, beam, chajja, facia, railing, RCC shelves etc including finishing the surface even and fair without using extra cement complete all as specified and directed.

Material and labour for 5 mm thick plastering in CM (1:3) on ceiling including finishing the surface even and fair without using extra cement complete all as specified and directed.

Roughnening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.

M&L for 40mm thick cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregates) as in floors complete all as specified and directed.

Material and labour for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but n.exc. 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles 300 x 450 x 7mm thick as in skirting/ dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.

Supply and fix in repair one pieced white wash basin without pedestal 550 X 400 (oval/ square pan) a/w brackets/ MS nuts and bolts for fixing, fixed with and including 32mm dia brass CP waste coupling and connecting waste pipe etc. complete all as specified and directed.

Supply and fix in repair 15mm PVC connection of length 600mm with PTMT nuts of superior quality complete all as specified and directed.

S&F in repair chromium plated pillar tap 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

Supply and fix in repair angular stop cock of 15mm bore fancy type, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and directed.

Supply and fix in repair bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fix in repair brass chromium plated shower rose of 125mm size fixed to 15 mm dia pipe complete all as specified and directed.

Supply and fix in repair vitreous china squatting pan, ‘orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 'P'or 'S' trap (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and directed.

Supply and fix in repair 10 litre capacity PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia for low level cistern including PVC connections 15mm size with PTMT nuts and washer both side of length 600mm complete all as specified and directed.

Supply and fix in repair rotational moulded polyethylene water storage tanks (multi-layered) 1000 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

Supply and fix in repairs grating doom 125mm dia of PTMT (Minimum wt 25 Gms) complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connections, segregating serviceable pipe for re-use complete all as specified and directed.

All as per item No. 62 above but 20mm bore complete all as specified and directed.

Supply and fix 15 mm bore GI tube, medium grade with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

All as per item No. 64 above but 20 mm bore complete all as specified and directed.

Fixing only serviceable pipe obtained from item No. 62 above complete all as specified and directed.

Fixing only serviceable pipe obtained from item No. 63 above complete all as specified and directed.

Supply and fix in repair Shelf of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats (Minimum weight 300gms) complete all as specified and directed.

Supply and fix in repair chromium plated towel rail of 20 mm dia, D type, 600mm long between flanges fixed with chromium plated brass screws and wooden/ plastic cleats complete all as specified and directed.

Material and labour for cementitious grouts mixed with admixture around water spouts, CI pipes / PVC pipes of any dia. complete all as specified and directed. (Make : Cebex 100 of Fosroc/ Intraplast EP of SIKA/ or equivalent brand of PIDILITE)

Supply and fix in repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints fixed to walls with and including PVC clip complete all as specified and directed.

Supply and fix in repair PVC(SWR) bend 110 mm dia complete all as specified and directed.

Supply and fix in repair PVC (SWR) branch piece, single T equal or unequal 110 mm dia complete all as specified and directed.

Dismantling cast iron drain pipes jointed in cement mortar obtained either from trenches/ wall as required complete all as specified and directed. (Note : Excavation if required, shall be measured and paid separately)

Supply and fix 100mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

Supply and fix 100mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall with MS clamp complete all as specified and directed.

Supply and fix 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

Supply and fix 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

Supply and fix 100mm bore cast iron cowls complete all as specified and directed.

Material and labour for complete removal of existing treatment on plastered surfaces of walls including washing, rubbing down and stopping of old treatement and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.

Material and labour for applying one coat of synthetic enamel paint to old wooden surface exceeding 10cm width or girth including preparation of old painted wooden surfaces complete all as specified and directed.

Material and labour for applying one coat of synthetic enamel paint on old steel surface of any description over 10cm width or girth including preparation of old painted surfaces complete all as specified and directed.

M&L for complete removal of existing treatment of wall including washing, rubbing down and stopping of old treatement and material and labour for applying 1.50mm thick wall care putty and applying two coats of oil bound distemper over a coat of alkali resistant primer to wall complete all as specified and directed.

All as per item No. 85 above but in ceiling complete all as specified and directed.

M&L for applying 1.5mm thick wall care putty and applying two coats of oil bound distemper over a coat of alkali resistant primer to wall to new plastered surface complete all as specified and directed.

All as per item No. 87 above but in ceiling complete all as specified and directed.

Material and labour for applying two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces of any description over 10cm width or girth including preparation of new surfaces complete all as specified and as directed.

Taking down pelmet boxes and Supply & fix Decorative /Fancy type curtain rods of length not exceeding 1.5 m of powder coated Aluminium of 25 mm dia alongwith fancy brackets and necy fixtures complete all as specified and directed.

M&L for 20-25 mm thick pre-polished single piece kota stone flooring laid over 20mm thick screed bed in CM (1:4) on treads/ riser of steps complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

Taking down carefully copper/ aluminium point wiring (light, fan, call bell, socket or power) complete, including fittings and fixtures such as switches, ceiling rose, pendants, holders, regulators, sockets, light fitting etc. & removing from site and making good the disturbed surfaces of wall, ceiling etc. complete all as specified and directed.

Material and labour for point wiring (concealed type) with PVC insulated FRLS (Fire retardant low smoke) cable 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including suitable size of modular GI boxes of thickness not less than 0.8 mm thick with suitable size of modular inner and outer cover combine plate and accessories complete for fixing of modular switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for one light/ fan point controlled by one way modular switch complete all as specified and directed. Note : Chase cutting shall be measured and paid separately.

All as per item No 94 above but for one 3/5 pin 6 Amps socket outlet on the same board with other switches complete all as specified and directed.

All as per item No 94 above but for one 3/5 pin 6 Amps socket outlet on the independent board complete all as specified and directed.

All as per item No 94 above but for one light point controlled by two 2 way modular switch complete all as specified and directed.

Material and labour for point wiring (Concealed type) with FRLS PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including suitable size of modular GI boxes of thickness not less than 0.8 mm thick with suitable size of modular inner and outer cover combine plate and accessories complete for fixing of modular switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for 3/5 pin 16 amps socket point on independent board complete all as specified and directed.

Supply and fix modular switch 1 way, 6 A, 1 module complete all as specified and directed.

Supply and fix modular switch 1 way, 16A, 1 modulecomplete all as specified and directed.

Supply and fix socket 6A 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix socket 15A/16A, 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix modular switch 2 way, 6 A, 1 module complete all as specified and directed.

Supply and fix modular type electronic fan regulator stepped type flush type AC 240 volt complete all as specified and directed.

Supply and fix ceiling rose surface bakelite, 65 x 50mm, three terminals complete all as specified and directed.

Material and labour for sub-main wiring (Concealed type) with FRLS two run of PVC insulated, unsheathed, single core, multistranded copper conductors of size 4.0 Sq mm and one run of 4.0 Sqmm copper conductor as continuity earth wire, drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site and taking down old sub main wiring with conduit complete all as specified and directed. Notes: a) Three run of 4.0sqmm copper conductor and one run of PVC conduit shall be measured as one unit b) Chases cutting shall be measured and paid separately

Material and labour for sub-main wiring (concealed type) with FRLS two run of PVC insulated, unsheathed, single core, multistranded copper conductors of size 6.0 Sq mm and one run of 6.0 Sqmm copper conductor as continuity earth wire, drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site and taking down old unsv sub main wiring with conduit complete all as specified and directed. a) Three run of 6.0sqmm copper conductor and one run of PVC conduit shall be measured as one unit b) Chases cutting shall be measured and paid separately

Supply and fix 4 way vertical type TPN DB in double door suitable for four pole MCCB as incomer including making good damaged surface/ wall including re-connection with existing earth wire to DB incuding taking out the old unserviceable one complete all as specified and directed. Note:- MCCB shall be measured and paid seperately. Cat No. 507745, Make: Legrand or equivalent model of Make as specified in PS

S&F MCCB Four pole, 415 volts, 100 Amps, breaking capacity 16KA complete all as specified and directed. Cat No 420015, Make: Legrand or equivalent Model of Makes specified in PS

Supply and fix powder coated sheet metal enclosure single pole & neutral for DBs (Double door) 12 way with rated busbar DIN channel, neutral link & earth link superline including taking down old unserviceable enclosure complete all as specified and directed. Cat No. 507612 of Legrand or equivalent Model of Makes specified in PS

Supply and fix powder coated sheet metal enclosure single pole & neutral for DBs (Double door) 8 way with rated busbar DIN channel, neutral link & earth link superline including taking down old unserviceable enclosure complete all as specified and directed. Cat No. 507611 of Legrand or equivalent Model of Makes specified in PS

Supply and fix powder coated sheet metal enclosure single pole & neutral for DBs (Double door) 4 way with rated busbar DIN channel, neutral link & earth link superline including taking down old unserviceable enclosure complete all as specified and directed. Cat No. 507610 of Legrand or equivalent Model of Makes specified in PS

Supply and fix MCB single pole & neutral 40 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified and directed.

Supply and fix MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified and directed.

S&F LED tube light fitting, 1 x 18 watt, 4 feet, 220 volt AC decorative type with driver holder and LED lamp including connecting up with three core flexible cable copper conductor including taking down old unserviceable light fitting complete all as specified and directed.

S&F LED tube light fitting 1 x 10 watt, 2 feet, 220 volt AC decorative type with driver holder and led lamp including connecting up with three core flexible cable copper conductor including taking down old unserceable light fitting complete all as specified and directed.

Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including taking down old unserviceable light fitting complete all as specified and directed.

Taking down ceiling fans of 1200/ 1400mm sweep & refixing safely alongwith its connected accessories like fan hook, clamps, fasteners etc. safely complete all as specified and directed.

Taking down wall mounted fans of 450mm sweep & refixing safely alongwith its connected accessories clamps, fateners etc. safely complete all as specified and directed.

Taking down Exhaust fans 300mm sweep & refixing safely alongwith its connected accessories like fan motor, louvers,clamps, fateners etc. safely complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc including taking down old unserviceable geyser and depositing to MES storeyard complete all as specified and directed.

Taking down Geyser electric water heater & refixing safely alongwith its connected accessories such as safety valve, hot and cold connection pipes, fasteners, clamps etc. complete all as specified and directed.

M&L for chases cutting in brick/ stone/ concrete surfaces girth, exc. 10cm and not exc. 20cm for concealed point and submain wiring and the like, making the surface good to match the existing in CM (1:3) etc. complete all as specified and directed.

Material and labour for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground ( earth pit not less than 2.25 mtrs deep below GL) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (Light grade) and 20mm dia GI pipe (medium grade) for watering and connected to control switch as directed including necessary earthwork as in soft/loose soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC (1:1.5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 150mm C/C both way and two Nos lifting handle made of 8mm dia TMT bar and set in cement mortar (1:4), funnel, wire mesh, char coal or coke and salt in alternate layer, testing, etc complete and as specified in electrical plate No 3 of SSR Pt I including taking down old earthing plate complete all as specified and directed.

Supply and fix GI wire as earth continuity conductor including taking down old unserviceable earth wire compleate all as specified and directed.

Supply and fix GI pipe 15 mm bore (dia), light-grade for protection of earth electrode including taking down old unserviceable GI pipe complete all as directed and specified.

Bansal And Co (BID ID -3402038)

CONSTRUCTION AND MAINTENANCE ENGINEERING CORPORATION (BID ID -3403330)

RBS Builders (BID ID -3400749)

RPL SYNDICATE CO (BID ID -3403417)

M/S KARTICK DUTTA (BID ID -3395896)

Friends Trading Co (BID ID -3399193)

RADHA ENTERPRISE (BID ID -3396182)

SENCO (BID ID -3396463)