SPECIAL REPAIRS TO SANITARY BLOCKS OF TECHNICAL AND EXPLOSIVE AREA BUILDINGS (P-76, P-174,P-149,P-142,P-176,P-84 ,P-198,P-66,P-177,P-79,P-89 P-106) AT NAD ALWAYE

Dismantling of floor hearth and wall tilling incl cement mortar bedding(but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

Material and labour for non-skid ceramic tiles, coloured (of approved shade and design), 7 to 8mm thick, of superior quality, square / rectangular ,area exceeding 0.11 Sqm but not exceeding 0.18 Sqm,400mmx400mm x7mm tk as in floors, etc.set and jointed in neat cement slurry and pointed mixed with colouring pigment to match shade of tiles laid over & including 15mm thick screed bed in CM (1:4) complete all as specified and directed

Material and labour for glazed ceramic tiles, coloured (light colour as approved), of size 300x 600 x7mm/ 350x250mm x 7mm / 450X 350X 7mm/450x300x7mm /300mmx200mmx7mm thick on vertical surfaces set and jointed in cement slurry over 10mm thick backing coat in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed

Demolition of existing APP modified water proofing membrane roof treatment on roof,parapet and side projections including cleaning of surfaces complete all as specified and directed

Material and labour for water proofing treatment to existing RCC roof slab including preparation of surfaces,side projections, parapet etc comprising with the following course of treatment/ specification from bottom to top complete all as specified and directed:- (a) Applying oil bound bituminous primer @ 0.20 kg/sqm , over plastered surfaces of roof including parapet surfaces,side projections. Providing and laying 3 mm thick APP modified water proofing membrane, weight not less than 3.0 Kgs per Sqm, reinforced with non-woven polyester fabric of weight not less 150 gms per sqm having softening point not less than 140 degree centigrate , longitudinal tensile strength not less than 800N/sqcm, tearing strengh of 180N by tourch -on-application incl min 10cm side overlap & 15cm end laps and applying a tack coat of blown grade hot bitumen 90/15 over the membrane @1.20kg/sqm including cleaning surfaces (b) over the membrane finishing with solar reflective bituminous aluminium paint @ 0.10kg/Sqm

Material and labour for 10 mm thick (average) plastering on concrete surfaces in cement mortar 1:4, in order to maintain proper slope and base over existing roof surfaces for laying of APP based polymeric membrane add WPC @3% of cement weight , finished even and smooth without using extra cement complete all as specified and directed. (Note:- Polymeric membrane, & WPC shall be will be measured and paid separately)

Supply only Integral water proofing compound complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

Supply and fix steel work in tubular trusses, including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 incl one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and directed

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings nails etc complete all as specified and directed

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

Material and labour for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

Demolition of brick work/solid block work built in cement mortar including all quoins, pillars etc.complete all as specified and directed

Material and labour providing PCC solid blocks exc. 10cm in width type C.1 1:3:6, 20mm graded aggregate and setting in cement mortar 1:6 complete all as specified and directed

Taking down cement plastering any description on brick on stone walls including raking out joints, hacking for key, scrubbing down with water etc complete as specified by the manufacturer complete all as specified and directed

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth with out using extra cement complete all as specified and directed

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth with out using extra cement adding WPC @3% weight of cement complete all as specified and directed (WPC measured and paid separately)

Taking down chowkats or frames n. exc 1.5 sqm each with shutter (without taking off Shutter) incl fixed portion etc complete all as specified and directed

Taking down chowkats or frames exc 1.5 sqm and n.exc 4 Sqm each with shutter (without taking off Shutter) incl windows , doors fixed portion etc complete all as specified and directed

Material and labour for fiber glass reinforced plastic (FRP) door frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame as in repair ( incl taking down unserviceable old PVC /UPVC/FRP door shutters ) , complete all as specified and directed

Material and labour for 30 mm thick glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to framesry accessories like a door handle 02 Nos , Min 3 Hinges and with Both side Locking arrangements etc ( Tower Bolts ) complete fittings , as in repair including to existing door frames with / new door frame etc complete as specified by the manufacturer and as directed

Supply and fix powder coated (mini thickness of powder coating 50 micron)Anodised aluminium frame for doors, windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed

Supply and fix powder coated anodised aluminium window and ventilator shutters with frame , side hung or sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handles(1no) complete all as specified and directed

Supply and fix anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete all as specified and directed

Supply and fix in stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.etc complete all as specified and directed

Supply and fix 20mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings to fittings in trenches/walls/ceiling concealed in wall area and making necessary holes and filling Gaps with PCC works , fittings are also included with necessary Elbow, Tee,Socket, Reducer,Bushing,Step over head bends, End cap, End pugs ,union ,tank nipple ,etc also included in special fittings of ( brass theating) ,male , female treads , adapters ,Brass tee & Reducers,Male Brass Threaded Adaptor , Female Brass Threaded Adaptor ( . Flange etc also making Suitable size of brass treaded to make a Complete Fittings of CPVC to match the CP/PTMT plumbing fittings as per std size also CPVC pipes shall be UV Stable, leak proof, tough, rigid and suitable for internal and external water supply applications incl CPVC yellow solvent cement to be used for pipe & fittings etc ( including dismantling old pipe & fittings) as in repair complete all as specified and directed

All as per item No 27 here-in-before but 25mm bore pipe complete all as specified and directed

Material and labour for 25mm long handle CPVC ball valve for 25 mm bore pipe fixing in CPVC pipeline by cutting of pipeline and fixing with necessary fitting and solvent complete all as specified and directed

Material and labour for 20mm long handle CPVC ball valve for 20 mm bore pipe fixing in CPVC pipeline by cutting of pipeline and fixing with necessary fitting and solvent complete all as specified and directed

Material and labour for PVC (SWR) pipe 50mm dia single socketed, in any length with rubber ring joints, laid in trenches/floors including all necessary accessories (bends,T,Y ) etc including taking down/ dismantling old pipe all as specified and fixing with pcc complete all as specified and directed

Supply and fix in repair 32mm bore waste coupling with waste pipe of PTMT (half or full threaded) (mini weight 32mm-45gms/40mm-60gms) for HWB sink etc complete all as specified and directed

Supply and fix to health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed

Supply and fix in repair to ( IWC to EWC) Vitreous China wash down water closet pan (European type) with P or S trap, snow white or white colour, fixing bolts, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete, excluding flushing cistern and flush pipe including seat cover as in repair complete all as specified and directed

Supply and fix in repair to brass CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed

Supply and fix shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed

Supply and fix to Soap dish, vitreous China white, approximate size 160x 160x90mm fixed to plugs with chromium plated brass screws complete all as specified and directed

Supply and fix PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed

Supply and fix to grating square fitting of size 150mm made in two parts for smell and mosquito proofing with minimum 25 mm water seal of PTMT. (Minimum weight 85gms) complete all as specified and directed

Supply and fix in repair to viterious china wash hand basin white flat back of size 550x400 mm ,includingcutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply of waste pipe complete all as specified and directed.

Supply and fix in repair to 10 litres, cast iron, valveless. syphonic action type, flushing cistern, high level, with inlet, ball valve, float, chain and pull, and brackets IWC/EWC OR Angilo Indian type inclusive of brackets , and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified and directed

Supply and fix in repair to brass chromium plated shower rose 125mm size with shower arm 15mm bore 195mm long incl 45 degree bend with flange of PTMT any colour(mini wgt 40gms) complete all as specified and directed

Supply and fix in repair to half stall urinal vitreous China urinals, complete including providing and fixing plugs, bedding urinal against wall , securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. complete all as specified and directed.

Supply and fix in repair to CP urinal spreader of size 180mmx142mmx 73mm for fixing with 15mm dia to 20mm dia pipe complete all as specified and directed

Supply and fix in repair 15mm bore stop valves, fancy type cast copper alloy chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

Supply and fix in repair to 15mm bore fancy type chromium plated bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed as in repair complete all as specified and directed

Supply and fix in repair to fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed

Demolition of unreinforced cement concrete in ground floor and paving n.exc 15 cm thick below or above ground level complete all as specified and directed

Material and labour for 50mm thick cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection,Floor topping etc , surfaces finished of concrete flooring with brooming complete all as spd u including provision of necessary construction joints complete all as specified and directed

Material and labour for cement concrete in foundations, filling and mass-concrete using type D2 1:4:8 (40mm graded aggregate) complete all as specified and directed

Material and labour for hard core of gauge n.exc 63mm, deposited, spread and levelled in layers n exc 15cm thick broken stone or boulders , water and rammed to a true surface complete all as specified and directed

Material and labour for chequered cement concrete tiles 20 x 20 cm x 25 mm thick, set jointed and pointed in neat cement slurry in floors with grey pigment cement and pigments over 20 mm screed bed in CM mortar 1: 6 complete all as specified and directed

Material and labour for distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work well finshed inclu 3mm thick wall care putty on newly plastered surface wall complete all as specified and directed

Material and labour for finishing walls with acrylic smooth exterior emulsion ( Anti Fungal Nature ) paint of ( as approved/ required shade) of New work over a coat of exterior grade primer (Two or more coat applied @ 1.67 ltr/10 sqm over and exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed

Material and labour for complete removal of existing treatment (white/colour wash/distemper) of walls including cornices plasters etc and applying two coat of acrylic based distemper over a coat of alkali resistant primer (acrylic based) inc 3mm wall care putty on old plastered surfaces complete all as specified and directed

Material and labour for complete removal of existing treatment (white/colour wash/distemper) of wallSupply and fixinishing walls with Acrylic Smooth exterior emulsion ( Anti Fungal Nature ) paint of ( as approved/ required shade) of New work over a coat of exterior grade primer (Two or more coat applied @ 1.67 ltr/10 sqm and exterior primer applied @ 2.20 kg/10 sqm) completed all as specified and directed

Excavating in trenches nexc. 1.5m wide and nexc 1.5m in depth for foundation,for shafts, wells, cesspits, manholes, pier holes etc and nexc 10sqm on plan and nexc 1.5m in depth and getting out in hard/dense soil complete all as specified and directed

Returning filling in including spreading levelling watering and well ramming in layers nexc 25cm in hard/ dense soil complete all as specified and directed

Removing excavated material (soil) nexc. 50m and depositing where directed at a level nexc 1.5m above the starting point complete all as specified and directed

Material and labour for PVC (SWR) pipe 110 mm dia single socketed, in any length with rubber ring joints, laid in trenches/floors including necessary accessories (bends,T,Y ) etc including taking down/ dismantling old pipe complete all as specified and directed

Material and labour for PVC (SWR) pipe 160 mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors including necessary accessories (bends,T,Y etc) including taking down old pipe complete all as specified and directed

Material and labour for 1:3:6 type C2 cement concrete bed (100mm thick) to drain pipes including packing under, and haunching against the sides of pipes with concrete after laid and tested for 110mm bore pipe complete all as specified and directed

All as per item No 63 here-in-before but 160mm dia pipe complete all as specified and directed

Demolition of cement concrete (unreinforced) in drain, Manhole bed, sewage line bed or in any location or in any position not otherwise specifically provided for complete all as specified and directed

Demolition of reinforced cement concrete cover slabs/guard post etc in any description and in any position (Reinforcement cut as required to facilitate demolition) complete all as specified and directed

Material and labour for precast cement concrete in cover slab type B1 1:2:4 using 20mm graded stone aggregate set in CM 1:6 complete all as specified and directed

Material and labour for TMT bars 10mm dia and over, cut to length, bent to shape required including cranking bending etc, hooking ends for binding with and including MS wire not less than 0.9mm dia complete all as specified and directed

Material and labour providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh complete all as specified and directed

Supply and fix anodised aluminium snap grid frame work (size of grid 605x605mm) for false ceiling including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm longand expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made aserconditionsseparately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed

Material and labour point wiring with 1.5 Sqmm (nominal area) copper conductor FRLS cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts drawn through PVC casing and caping of suitable size (as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed

One light point for one exhxaust fan controlled by one 5 Amps one way switch complete all as specified and directed

One 3 pin socket outlet 5 Amps on Same board complete all as specified and directed

Supply and fix Switch piano flush button single pole one way 5 Amps, 240 Volts complete all as specified and directed

Supply and fix Socket outlet 2 in 1, 3 pin, 5A (multipurpose) suitable for 2 pin / 3 pin plug complete all as specified and directed

Supply and fix Pressure die cast housing LED bulk head 14 Watt 230 Volt, IP 65 protection and IK08 impact resistance suitable for suface and wall mounting application complete all as specified and directed

Supply and fix Ceiling rose surface backelite ISI marked with 3 terminal including connecting and testing complete all as specified and directed.

Supply and fix lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed

Supply and fix LED lamp, 9 watts, 230 Volts, AC complete all as specified and directed

Supply and fix MCB, SP, single pole ,230 volts, 6 to 32 Amp, 10 KA, 'C' curve complete all as specified and directed

Supply and fix in replacement MCB DB sheet enclosure single door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 4 way complete all as specified and directed.

Material and labour in replacement for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed

Material and labour for disconnecting existing tanks exc 250 and nexc 500 ltr capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. (Cleaning repairing, etc. measured separately)

Dismantling old unserviceable water tanks exc 250 & nexc 500 ltr capacity and removing to store complete all as specified and directed

Material and labour for rotational moulded polyethylene water storage tanks 500 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed

Supply and fix PVC conduit pipe 20 mm inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories complete all as specified and directed

Please Enable Macros to View BoQ information