SPECIAL REPAIR TO INTERNAL ROADS IN FRONT OF MT AREA AT OLD ENGR REGT LOC AND REPAIRING OF GROUP-III AND GROUP-VI GODOWNS AT CSD DEPOT MISSAMARI

Amount

Dismantling plain or corrugated asbestos sheeting any thickness in roof covering complete all as specified and directed.

S&F pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F pre painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smooth complete all as specified and directed.

Supply and fix for Turbo Ventilators Industrial/domestic turbo ventilator as per Manufactureres Insturction :- (i) (Turbine Dia 28 Inch (760mm), (Nech/Throat-24"), (Height-18"/610mm) (Vanes(Blades) - 42 Vanes, Aluminium 0.50mm Alloy 8011), Base Ring MOC(Mounting ring - Stainless steel),(Top plate MOC- Stainless steel 0.80 mm thickness). (ii) Rotation - Twin sealed 6203ZZ bearing with self lubricating duponty zytel 101L Polyamide 66 resin to ensure frictionless rotation even at lowest wind velocity Twin sealed 6201ZZ bearings with self lubricating Duponty Zytel 101L Polyamide 66 resin to ensure frictionless rotation even at lowest wind velocity. (iii) (Centre shaft : 18mm high carbon steel zinc plated) ( Inner Arms - M.S. with electro zinc plating), (Outer Arms - M.S. with electro zinc plating), (Frp base plate - 2mm thick clear 1.020 mtr wide 1.65 mtr long matching your sheet profile weight 8Kg Approx), (Centre width - 800mm+/-5mm), (Dia of Bottom Ring- 600mm+/-15mm), (Nos of Bearings -02 Nos), (Bearing Type : skf-6001ZZ & 6003ZZ) (Rivets-Aluminium Alloy wiht Washer) ,angle adjustable range- 0 to 17 deg,Exhaust capacity- 1972 - 2164 CFM, Wind velocity 8 Km/Hr, Make:- Tubro Ventilator India (Industrial Ventilating Solutions) or Equivalent as approved by GE complete all as specified and as directed.

S&F Steel rolling shutters 1.25mm thick, with ball bearing, gear operated type with bevel gear box and crank handle as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, incl safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

Taking down old steel rolling shutter not exceeding 10 Sqm each (Without taking off shutters from the frame) complete all as specified and directed.

S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or revited, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290. Gde-E-165 complete all as specified and directed.

S & F 4 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.

Supply and fixed stainless steel wire cloth with 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed withstainless steel wire stapple complete all as specified and directed.

Excavation in trenches n.exe. 1.5 m width and n.exe. 1.5 m in depth for foundation in soft/loose soil & getting out.

Returning filling in, including spreading, levelling, watering & well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material n exc 50 m & depositing where directed at a level n exc 1.5 m complete all as specified and directed.

M&L cement concrete with PCC type D2 1:4:8 using 40mm graded aggregate as in foundationcomplete all as specified and directed.

M&L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width Type C1 1:3 : 6 ( using 20 mm graded aggregate ) and setting in cement mortar 1:6 complete all as specified and as directed.

M&L Sand filling under floors or in foundations including watering and conosoldiation complete all as specified and directed.

M&L for brocken stone or boulders of hardcore of gauge n exc 63 mm deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surfacecomplete all as specified and directed.

M&L for 100mm thick PCC type D2 1:4:8 using (40mm gradded aggregate) as in sub base complete all as specified and directed.

M&L for 75 mm thick cement concrete as in plinth protection type C-2 1:3:6 (using 40mm graded aggregate) finishing concrete surface even and smooth with using extra cement complete all as specified and directed.

M&L Heavy duty (Dura stone) Coloured Ceramic Tiles 300x300x8-10mm thick, in Floors, set and jointed in Neat Cement Slurry and pointed in White Cement mixed with Pigment to match the colour of tiles over and including 15 mm thick screed bed or bedding layer in CM 1:4, complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161 1979 grade St.-240 complete all as specified and directed.

Preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of Red Oxide, zinc chorme and applying two coat of synthetic enamel paint complete all as specified and directed.

Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described appling two coat of synthetic enamel paint complete all as specified and directed.

Material & Labour for preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm over new surface over 1 mm thick wall care putty complete all as specified and directed.

M & L for Complete removal of old surface for preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm over new surface over 1 mm thick wall care putty.

M&L for preparation of new plastered surfaces of walls and applying two coats of acrylic distemper including one coat of chalk whiting on plastered surface to prepara-tory to distempering complete all as specified and directed over 1 mm thick wall care putty.

M&L for complete removal of old surfaces of walls and applying two coats of acrylic distemper including one coat of chalk whiting on plastered/putty surface to prepara-tory to distempering complete all as specified and directed over 1 mm thick wall care putty.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400sqm complete all as specified and directed.

M&L 15 cm thick (compacted thickness) in two layers WBM, with coarse aggregates of grading 2 (63 to40mm size) of grading basalt or trap stone spread, Watered , rolled consolidated to gradient and camber required power roller 8 -12 tone complete all as specifed and directed.

M&L for preparing Unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and Applying evenly a priming/tack coat (Paving bitumen ) with bituminous primer at 10 kg per 10 sq metre complete all as specified and directed.

M&L For Premix bituminous, macadam compacted thickness 75 mm or less with 4% binder content by wight of total mix using VG-30 bitumen of any penetration laid /rolled to required gradint and camber using power roller 8-12 tonnes complete all as specifed and directed

M&L for providing Bituminous premix semi dence asphaltic dense concrete 40mm thick compacted with 5.5 % binder content as in semi-dense asphaltic concrete totasl mix rolled with 8 to 12 tonne power roller and complete to required camper and gradient complete all as specifed and directed.

M&L for preparation of bituminous road surface and marking 2.5 mm thick centre lines, stop lines, dashes, arrows etc and the like n exc 10 cm wide on roads pavements with hot applied thermoplastic road marking of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturerss instruction complete all as specified and directed.

S&F in repair solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125 mm x 125 mm x 25 mm (shank 65 mm)of heigh effciency Mono rystafie solar panel 2.4 V/0.3 watt one NI-ed rechargeable battery (1.2V/1600 MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions aii as specified and directed.

S&F in repair cat eye solar reflective type of metal body alloy of size 100mmX100mmX20mm made of with PAMA striplens reflector of model N DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions.

M/S K. T. ENGINEERING (BID ID -3103776)

M/S K.K.TRADERS (BID ID -3117751)