Under District Lakhimpur Kheri, Construction of road and culvert from Ramsagars house to Vedrams house in Majra Mathiya, Trilokpur, Gram Sabha of Block Palia, Lot No 3

Work

Earth work in cutting or in embankment in crdinary soil incl. lead up to 30m. & lift up to 1.50 m. as per direction by Engineer in charge S.I.no.253

Construction of granular sub base by providing well graded material spreading in uniform layer with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacted with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 with 45 -63 mm stone ballast as per Technical Specification Clause 405)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 with 22.4 - 53 mm stone ballast as per Technical Specification Clause 405)

Brick eadiging on both sides of the road with First class bricks 8 cm wide and 12 cm deep laid with mud mortar including etc.all

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510.

Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at rate of 0.70 - 1.00 Kg/Sqm using mechanical means as per Technical Specification Clause 502.

Providing and applying tack coat with Bitumen (RS-1) using Bitumen distributor at the rate of 0.25 - 3.00 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type C as per Technical Specification Clause 508)