CA NO GE SOUTH AMB 29 2020 2021 REPAIR AND POLISHING TO LOCKER BED SIDE WOODEN DESK WITH DIAS TABLE DRESSING TRESSLE STORE ROOMS CHAIR CBA SPL WITH HAND REST AND OTHER MISC FURNITURE FOR OTM AND MARRIED ACCN UNDER AOR OF GE SOUTH AMBALA CANTT

Amount

LOCKER BED SIDE WOODEN (FD-54 (M) & 222): -

Taking out U/S back plywood from Locker bedside wooden and S&F new back plywood made of 6mm thick plywood commercial exterior grade BWR complete all as specified and directed. All as shown in drg and as directed by Engr-in-charge.

Taking out U/S shelves form Locker bed side wooden and S&F new shelves made of 18mm thick block board commercial exterior grade BWR complete all as specified and directed. All as shown in drg and directed by Engr-in-charge

Taking out U/S side from Locker bedside wooden and S&F new side made of 18mm thick block board commercial one side teak face exterior gradecomplete all as specified and directed matching with the existing shape & size or all as per list of make. All as shown in drg and directed by Engr-in-charge.

Taking out U/S top/bottom from Locker bedside wooden and S&F new top/bottom made of 18mm thick block board commercial one side teak face exterior grade complete all as specified and directed shown in drg and as directed by Engr-in-charge.

Taking out U/S shutter from locker bedside wooden and S&F new shutter made of 18mm thick block board commercial exterior grade BWR one side teak face including appropriate size of hinges, hasp & staple and handle etc. All as shown in drg and as directed by Engr-in-charge.

Taking out U/S leg from locker bedside wooden and S&F new leg made of seasoned teak wood matching with the existing shape & size. All as shown in drg and as directed by Engr-in-charge.

REPAIR TO DESK WITH DIAS (FD-107 / 1021): -

Material and labour in replacement for Box of Desk (Top,Bottom, Back, Sides) shall be 18/19mm thick Prelaminated particle board (exterior grade), ISI marked, (Shade and texture natural teak) and 4mm thick half round first class teak wood edging all around the top of Desk, complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for leg of desk with 25mm dia MS tube of wall thickness 1.6mm including necessary cutting, welding etc, complete all as specified and shown in drawing and as directed by the Engineer-in Charge.

Material and labour in replacement for centre stiffener and long rail of desk with 25mm dia MS tube of wall thickness 1.60mm including necessary cutting, welding etc. complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for short stiffener and short rail of desk with 25mm dia MS tube of wall thickness 1.60mm including necessary cutting, welding etc. complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for hard rubber shoe of Desk of black colour as per existing as approved complete all as specified and shown in drawing and as directed by the Engineer-in-Charge,

TABLE DRESSING GENTS WITH MIRROR (FD-230, 379 & 31): -

Taking out U/S drawers from table dressing gents and S&F new drawers made of 12mm thick teak wood except bottom of drawers which shall be of 6mm thick ply wood commercial exterior grade BWR of make & front of drawers shall be made of 12mm thick pre-laminated particle board one side teak face exterior grade complete all as specified and directed. All as shown in drg and as directed by Engr-in-charge.

Taking out U/S top from table dressing gents and S&F new top made of 12mm thick pre-laminated particle board one side teak face exterior grade of make duly covered with 4mm thick teak wood beading all around the top or all as per list of make. All as shown in drg and as directed by Engr-in-charge.

Taking out U/S bottom from table dressing gents and S&F new bottom made of 12mm thick pre-laminated particle board one side teak face exterior grade BWR all as per list of make duly covered with 4mm thick teak wood beading all around the top or all as per list of make. All as shown in drg and as directed by Engr-in-charge.

Taking out U/S side from table dressing gents and S&F new side made of 12mm thick pre-laminated particle board one side teak face exterior grade BWR all as per list of make duly covered with 4mm thick teak wood beading all around the top matching with the existing shape & size. All as shown in drg and as directed by Engr-in-charge.

Taking out U/S looking mirror from table dressing gents and S&F new looking mirror 5.5mm thick of size 2'-6"x1'-3" all as per list of make free from distortion and other defect duly framed with backing plywood, teak wood beading & vertical support etc. All as shown in drg and as directed by Engr-in-charge.

TABLE DRESSING LADIES WITH MIRROR (FD-251, 378 & 32): -

Taking out U/S drawers from table dressing ladies and S&F new drawers made of 12mm thick teak wood except bottom of drawers which shall be of 6mm thick ply wood commercial exterior grade BWR all as per list of make & front of drawers shall be made of 18mm thick pre-laminated particle board one side teak face exterior grade BWR Make : Bhutan/Kitply or all as per list of make including knob etc or all as per list of make. All as shown in drg and as directed by Engr-in-charge.

Taking out U/S top from table dressing ladies and S&F new top made of 18mm thick pre-laminated particle board one side teak face exterior grade BWR all as per list of make duly covered with 4mm thick teak wood beading all around the top. All as shown in drg.

Taking out U/S bottom from table dressing ladies and S&F new bottom made of 18mm thick pre-laminated particle board one side teak face exterior grade BWR all as per list of make duly covered with 4mm thick teak wood beading all around the top. All as shown in drg and as directed by Engr-in-charge and as specified.

Taking out U/S side from table dressing ladies and S&F new side made of 18mm thick pre-laminated particle board one side teak face exterior grade BWR duly covered with 4mm thick teak wood beading all around the top matching with the existig shape & size. All as shown in drg and as directed by Engr-in-charge and as specified.

Taking out U/S looking mirror from table dressing ladies and S&F new looking mirror 5.5mm thick 355mmx1220mm free from distortion and other defect duly framed with backing plywood, teak wood beading & vertical support etc. All as shown in drg and as directed by Engr-in-charge.

Taking out U/S plain glass pane and S&F new plain glass pane 4mm thick & standard aluminium channel having two 'U' shaped channel for sliding matching with the existing shape & size. All as shown in drg and as directed by Engr-in-charge and as specified.

REPAIRS TO TRESTLE STORE ROOM WOODEN (FD-86): -

Material and labour in replacement for repair to trestle store room wooden by taking down the existing broken / unserviceable long rail and supply and fixing of new well seasoned second class hard wood Shisham long rail of size 2440mm x100mm x100mm all as per drawing and as specified and directed by the Engineer-in-Charge

Material and labour in replacement for repair to trestle store room wooden by taking down the existing broken / unserviceable leg and supply and fixing of new well seasoned second class hard wood Shisham leg of size 405mm x100mm x100mm all as per drawing and as specified and directed as by the Engineer-in-Charge

Material and labour in replacement for repair to trestle store room wooden by taking down the existing broken / unserviceable stiffener and supply and fixing of new well seasoned second class hard wood Shisham leg of size 1980mm x175mm x100mm all as per drawing and as specified and directed by the Engineer-in-Charge

REPAIRS TO HAT STAND WITH MIRROR (FD-23 & 261): -

Material and labour in replacement for Looking Mirror of size 440mm x300mm x 5.5mm of approved quality duly fixed with beading of size 35mm x 6mm made out of well seasoned teak wood duly finished all as per drawing and as directed by the Engineer in Charge and as specified.

Material and labour in replacement for Aluminium peg 100mm long as per sample shall be fixed with screw wood steel 25mm long all as per drawing, directed by the Engineer in Charge and as specified.

Material and labour in replacement for MS plate for hanging of Hat stand as per approved sample shall be fixed to the back of the hat stand as shown on the drawing, as directed by the Engineer in Charge and as specified.

Material and labour in replacement for teak wood beading made out of well seaonsed teak wood of size 35mm x 6mm all around shall be provided to the frame of hat stand as shown on drawing, as directed by the Engineer in Charge and as specified.

Material and labour in replacement for Plywood 6mm thick commercial confirming to IS duly approved shall be provided whenever required to be fixed with head less nails at the back side of hat stand all as shown on drawing and as directed by the Engineer in Charge and as specified.

Material and labour in replacement for plywood one side teak face 4mm thick commerical confirming to IS duly approved shall be provided wherever required to be fixed with head less nails at the front side of hat stand as shown on drawing and as directed by the Engineer in Charge.

REPAIRS TO BIN SOILED LINEN (FD-70M, FD-244 & FD-212): -

Material and labour in replacement for New top of Bin soiled made out of 18/19mm thick wooden plank of seasoned teak to the the existing teak wood frame all as per drawing and as directed by the Engineer-in-Charge.

Material and labour in replacement for New sides of bin soiled (front or back) on existing old wooden frame made to shape and size with 18/19mm thick wooden plank all of seasoned teak as per drawing as and directed by the Engineer-in-Charge .

Material and labour in replacement for New legs to bin soiled (front or back) made to shape and size with 18/19mm thick wooden pank of seasoned leak wood all as per drawing and directed by the Engineer-in-Charge.

Material and labour in replacement for Back of bin soiled made out of 18/19mm thick wooden plank of seasoned teak and all as per drawing and as specified and directed by the Engineer-in-Charge

Material and labour in replacement for mild steel butt hinges of size 75mm, Medium weight, cold rolled all as per drawing and as specified and directed by the Engineer in Charge.

Material and labour for recanning of bin soled with plastic cane half round 2mm wide 0.4mm thick best quality as per Godrej pattern including removing of old cane complete all as specified and directed.

REPAIRS TO SIDE BOARD (FD-26 M): -

Material and labour in replacement for top of side board with 18/19mm thick pre laminated particle board one side teak faced including 6mm thick teak wood edging all-round , complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for bottom of side board with 18/19mm thick particle board commercial type including 6mm thick teak wood edging all-round , complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for door shutter of side board with 18/19 mm thick one side teak faced pre-laminated particle board including CP knob, lock, hinges fixed to each shutter and 6 mm thick teak wood beading all around complete all as specified and shown in drawing and as directed.

Material and labour in replacement for drawer of side board including CP knob fixed to each drawer complete all as specified and shown in drawing and as directed .

Material and labour in replacement for back side of side board with 9 mm thick commercial ply wood , complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for shelf of side board with 18/19 mm thick particle board , complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for leg of side board of required size made out of well seasoned 1st class Teak wood, complete all as specified and shown in drawing and as directed .

TABLE BED SIDE (FD-248): -

Material and labour in replacement for leg of table bed side of required size made of well seasoned 1st class teak wood,complete all as specified and shown in drawing and as directed. .

Material and labour in replacement for front rail of table bed side of required size made of well seasoned 1st class teak wood,complete all as specified and shown in drawing and as directed.

Material and labour in replacement for side rail of table bed side of required size made of well seasoned 1st class teak wood,complete all as specified and shown in drawing and as directed.

Material and labour in replacement for back side of table bed side with 6 mm thick plywood top , commercial type, BWR grade, ISI marked of required size complete all as specified and shown in drawing and as directed. .

Material and labour in replacement for shelf of table bed side with18/19mm thick one side teak faced pre laminated particle board, ISI Marked complete all as specified and shown in drawing and as directed.

Material and labour in replacement for top of of table bed side with18/19mm thick of prelaminated particle board including hard wood beeding complete all as specified and shown in drawing and as directed.

Material and labour in replacement for side of of table bed side with18/19mm thick one side teak faced pre laminated particle board, ISI Marked complete all as specified and shown in drawing and as directed.

SOFA SET 4/5 SEATER (FD-281): -

Material and labour in replacement for foam cushion of size 530 mm X 500 mm X 100 mm thick, 32 density, including tapesty cloth cover of best quality (cost not less than Rs.180/- per metre ) and stitching complete as per sample all as specified and shown in drawing and as directed.

Material and labour in replacement for Arm rest made of 1st class teak hard wood of size 70mmx35mm of required shape & length complete all as specified and shown in drawing and as directed

Material and labour in replacement for front long rail of size 35mmx70mm of required shape & length made of 1st class teak hard wood for 3 seater sofa complete all as specified and shown in drawing and as directed.

Material and labour in replacement for back long rail of size 35mmx70mm of required shape & length made of 1st class teak hard wood for 3 seater sofa complete all as specified and shown in drawing and as directed.

Material and labour in replacement for front rail of size 35mmx70mm of required shape & length made of 1st class teak hard wood for single seater sofa complete all as specified and shown in drawing and as directed.

Material and labour in replacement for back rail of size 35mmx70mm of required shape & length made of 1st class teak hard wood for single seater sofa complete all as specified and shown in drawing and as directed.

Material and labour in replacement for batten of back rest made of 1st class teak hard wood of size 51mmx20mm of required shape & length complete all as specified and shown in drawing and as directed

Material and labour in replacement for batten of seat made of 1st class teak hard wood of size 51mmx20mm of required shape & length complete all as specified and shown in drawing and as directed

Material and labour in replacement for leg made of 1 st class teak hard wood of size 70mmx35mm of required shape & length complete all as specified and shown in drawing and as directed

REPAIR TO TABLE OFFICE CLERK WOODEN (FD- ): -

Material and labour in replacement for top of table office clerk wooden with 18/19 mm thick Particle board (exterior grade) , ISI marked , commercial type including 1.0mm thick laminated sheet ( Shade and texture natural teak) pasted over the particle board on one face with synthetic rubber adhessive of make Fevicol or Pidilite or equivalent conforming to IS-4835 and 4 mm thick half round first class teak wood edging all round the table top , complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for leg of table of required size made of well seasoned 1st class teak wood,, complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for front rail of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for side rail of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for drawer sample approved by GE made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for stiffener of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .

REPAIR TO TABLE '3' X '2' FOR HAV's/OR's: -

Material and labour in replacement for top of table 3’ X 2’ for Hav/ OR's with 18/19 mm thick particle board (exterior grade) , ISI marked , commercial type including 1.0mm thick laminated sheet ( Shade and texture natural teak) pasted over the particle board on one face with synthetic rubber adhessive of make Fevicol or Pidilite or equivalent conforming to IS-4835 and 4 mm thick half round first class teak wood edging all around the table top , complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for leg of table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for front rail of table 3’ X 2’ for Hav/ OR's of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for side rail of table 3’ X 2’ for Hav/ OR's of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for stiffener of table 3’ X 2’ for Hav/ OR's of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .

REPAIR TO CHAIR DINING WITH CUSHION (FD/E6/MAP-II/10): -

Material and labour in replacement for seat of chair dining with cushion, Seat shall be 12 mm thick BWR grade phenol bonded plywood, commercial vennered both sides, fixed to rails with 12 Nos. steel screws of suitable size. The seat ply shall be covered with removeable 75 mm thick 32 density foam cushion with approved upholstery fabric of best quality as approved by the GE not less than of rate Rs.200/- per meter. All as per drawing and as specified and directed by the Engineer-in-Charge

Material and labour in replacement for damaged front leg of chair dining with cushion with new leg of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.

Material and labour in replacement for damaged rear leg of chair dining with cushion with new leg of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.

Material and labour in replacement for damaged back rest of chair dining with cushion with new back rest of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.

Material and labour in replacement for damaged side rail of chair wooden bottom with new side rail of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.

Material and labour in replacement for damaged front rail of chair dining with cushion with new front rail of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge .

Material and labour in replacement for damaged back rail of chair dining with cushion with new back rail of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge .

Material and labour in replacement for damaged stiffener of chair dining with cushion with new stiffener of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.

Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed for the following wooden furnitures : -

Locker bed side wooden (FD-54 (M) & 222)

DESK WITH DIAS (FD-107 / 1021)

Table dressing gents with mirror (FD-230,379 & 31)

Table dressing ladies with mirror (FD-251, 378 & 32)

HAT STAND WITH MIRROR (FD-23 & 261)

BIN SOILED LINEN (FD - 70 M, FD-244, FD-212)

SIDE BOARD (FD – 26 M ) :-

Table Bed Side ( FD-248 )

TABLE OFFICE CLERK WOODEN (FD- ) :-

SOFA SET 4/5 SEATER (FD-281): -

TABLE 3’ X 2’ FOR HAV's/OR's :-

CHAIR DINING WITH CUSHION (FD/E6/MAP-II/10)

Bal Singh and Sons

M/s Rajesh Kumar Jain