Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹61.7 LAccepted-AOC 27 19 F F D BLOCK CHATTARPUR EXTN SOUTH WEST DELHI DELHI 110075 | SOUTH WEST DELHI | DELHI | 110075 | L1 | Accepted-AOC Lowest and Reasonable bidder | |
| 2 | L2₹65.9 L+₹4.1 L (6.69%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹66.5 L+₹4.8 L (7.72%)Rejected-Finance 18 MOTI BAGH BABYAL ROAD AMBALA CANTT 133001 | AMBALA CANTT | AMBALA | HARYANA | 133001 | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹67.5 L+₹5.7 L (9.28%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹69.1 L+₹7.4 L (11.9%)Rejected-Finance 179 THE MALL AMBALA CANTT 133001 HR | AMBALA | HARYANA | 133001 | L5 | Rejected-Finance Not Lowest |
Tender Value
₹80 L
EMD Value
₹1.4 L
Closing Date
12 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF AMBALA
HQ CWE AF AMBALA Ambala cantt 133001
IMPROVEMENT OF LIVING IN ACCOMMODATION OF CERTAIN BLOCKS OF OFFICERS AT AF STN AMBALA UNDER GE (AF) AMBALA
2022_MES_522091_2
CWE/AF AMB/AMB-10/2022-23
Open Tender
Civil Works
Item Rate
270 days
Ambala cantt
For MES enlisted contractor Class C Category a i and for un-enlisted contractor refer NIT
7 documents required · 7 mandatory
₹1,000
GE AF AMBALA
₹1.4 L
Yes
2 Dec 2022
19 Sept 2022
14 Oct 2022
19 Sept 2022
12 Oct 2022
27 Sept 2022
19 Sept 2022 - 23 Sept 2022
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, rubbish off the premises complete all as specified and directed.
Demolition of plain cement concrete (unreinforced) of any description and in any position not otherwise specifically provided including removal of debris to a distance not exceeding 500 mtr complete all as specified and directed
Taking down cement plaster on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water including removal of debries to distance not exceeding 500 mtr complete all as specified and directed.
Taking down cement plaster from soffits of slabs/chajjas/sunshades etc., scrubbing down with water including removal of debries to distance not exceeding 500 mtr complete all as specified and directed.
Taking down or up steel tubing and connections for refixing or removal from site for 15 mm bore pipe complete all as specified and directed.
Taking down or up steel tubing and connections for refixing or removal from site for 20 mm bore pipe complete all as specified and directed. Note for BOQ item No. 5.00 & 6.00: The cutting / chasing required for taking up or down steel tubing is included in quoted rates.
M&L 75mm thick PCC 1:4:8, type D2, using 40mm graded mechanically crushed stone aggregate as in sub bases of floors complete all as specified and directed.
M&L 25mm thick PCC 1:2:4, type B1, using 20mm graded mechanically crushed stone aggregate as in floor, finishing the surface even & fair to receive the tiling work complete all as specified and directed.
M&L Vitrified ceramic tiles, 1st quality, coloured, light shade, 10 mm thick, square/ rectangular, polished, area of each tile not exceeding 0.36 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15 mm thick screed bed or bedding layers in cement mortar 1:6, complete all as specified and directed.
M&L Vitrified ceramic tiles, 1st quality, coloured, light shade, 10 mm thick, square/ rectangular, polished, area of each tile not exceeding 0.36 Sqm as in vertical surfaces (skirting/dado etc.) set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 10 mm thick rendering/backing coat in cement mortar 1:4, complete all as specified and directed.
M&L coloured, non-skid, jointfree, ceramic tiles, 1st quality, 7 to 8 mm thick, square/ rectangular, area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or bedding layers in cement mortar 1:4, complete all as specified and directed.
M&L jointfee glazed desinger ceramic coloured tiles, 1st quality, size 300mm X450mm, 7mm to 8mm thick on vertical surface as in skirting/dado, set and jointed in neat cement slurry & pointed in white or coloured cement to match the surface over and including 10mm thick rendering/backing coat in cement mortar 1:4 complete all as specified and directed. Notes for BOQ item No 9.00 to 12.00: (i) The rates includes for all straight cutting & waste including raking or circular cutting complete. (ii) All corners in wall tilling should be properly mitred jointed to give monolithic uniform appearance. (iii) The rates for tiling includes for laying to any pattern with one or more colour as directed. (iv) If tiles of dfferent sizes are used then no price adjustment shall be made on this account.
M&L rendering 15 mm thick in cement mortar 1:6, finished even and smooth without using extra cement on fair faces of brick or concrete surfaces as in wall complete all as specified and directed.
M&L rendering 15 mm thick in cement mortar 1:4 mixed with water proofing compund(WPC) @ 2% by weight of cement, finished even and smooth without using extra cement on fair faces of brick or concrete surfaces as in wall complete all as specified and directed. Note: Water proofing compound(WPC) shall be measured & paid seperately.
Supply only integral water proofing compound (WPC) complete all as specified and directed.
M&L rendering 5 mm thick in cement mortar 1:3, finished even and smooth without using extra cement on fair faces of concrete surfaces as in ceiling/soffits complete all as specified and directed.
S&F galvanized iron water tubes 15 mm bore, medium grade, with all fittings and fixed complete to wall & ceiling with and including cutting chasing whereever required or laid in floor complete all as specified and directed.
S&F galvanized iron water tubes 20 mm bore, medium grade, with all fittings and fixed complete to wall & ceiling with and including cutting chasing whereever required or laid in floor complete all as specified and directed.
S&F in repair wall hung water closet of size 365mm x 360mm x 545mm with & including soft slim closet seat cover(PP) of same tint complete all as specified and directed. Make: Parryware catpart No. C8836, Jaquar catpart No. FLS-WHT-5951, Cera catpart No. S1047105
S&F in repair slim concealed cistern with floor mounting frame, installation kit, drain pipe connection set for wall hung WC with & including flush control plate segement, white/chrome slim inlcuding cutting chases wherever required complete all as specified and directed. Make: Cera catpart No. B1110111 & B1120105-W for Push button, Parryware catpart No. E812099 & E8219A2 for Push button, Jaquar catpart No. JCS-WHT-2400FP
S&F in replacement rotational moulded polyethylene(PVC) water storage tank, HDPE, off white colour, triple layered , cylinderical type fixed and hoisted in position on roof, at any height, of capacity 500 ltr and making connections with 20 mm GI pipe inlets & outlets complete including locking arrangements and 20 mm bore ball brass valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gram) complete all as specified and directed.
S&F in repair vitreous china wash hand basin, table top type, any tint, size 190mm x 600mm x 435mm including 32mm bore PVC waste pipe, CP waste fitting & brass chromium plated 15mm bore hot and cold basin mixture screwed down for water pipe complete all as specified and directed. Make: Jaquar catpart No.JDS-WHT-25931, Cera catpart No. S2020159 or equivalent of Parryware/Hindware
S&F bottle trap with fully casted body (with internal partition) 32mm bore with 190mm & 125mm long connecting pipes & wall flange complete all as specified and directed. Make: Parryware catpart No. T3205A1, Cera catpart No. F8060401 or equivalent of Jaquar/Hindware
S&F in replacement 15 mm bore stop valves, concealed type, cast copper alloy, fancy type, chromium plated, regular body with adjustable wall flange including cutting chases wherever required for concealing complete all as specified and directed. Make: Parryware catpart No. T3811A1, Cera catpart No. F1005751(exposed part) & F4060102(concealed part) or equivalent of Jaquar/Marc
S&F in replacement bib taps, 15 mm bore, cast copper alloy, brass chromium plated, fancy type, long body with flange complete all as specified & directed. Make: Parryware catpart No. G3104A1, Cera catpart No. F1005152 or equivalent of Jaquar/Marc
S&F in replacement brass chormium plated hand shower, health faucet, suitable for 15 mm bore pipe with 1.25 metre long flexible tube & wall hook complete all as specified and directed. Make: Parryware catpart No. T9861A1 or equivalent of Jaquar/Marc/Hindware
BLANK
S&F brass chromium plated single lever exposed shower mixer pipe suitable for 15 mm bore pipe and hand shower with connecting legs and wall flages etc including S&F exposed shower pipe round shape 25mm size 1050mm X 350mm with provision to adjust height upto 250mm with wall bracket for connection to overhead shower & sliding holder for hand shower, with or without swivel joints any size including fixed to steel pipe or union complete all as specified and directed. Make: Parryware catpart No. C884199, Jaquar catpart No. JPL-SLM-JA021 or equivalent of Hindware/Cera
S&F replacement wall sink mixture with regular swinging spout (wall mounted model) with connecting legs & wall flanges complete all as specified and directed. Make: Parryware catpart No. T5035A1, Cera catpart No. F1015501 or equivalent of Jaquar/Marc
S&F in repair brass chromium plated, towel ring, square shape, fancy type fixed complete all as specified and directed. Make: Parryware catpart No. T6904A1, Cera catpart No. F5002105 or equivalent of Jaquar/Marc
S&F in repair brass chromium plated, soap dish any type fixed complete all as specified and directed. Make: Parryware catpart No. T6902A1, Cera catpart No. F5003106 or equivalent of Jaquar/Marc
S&F corner glass shelf, 300mm x 300mm, made out of 8mm thick superior quality sheet glass with CP bracket and CP railing fixed complete all as specified and directed. Make: Parryware catpart No. T6010A1, Cera catpart No. F5005103 or equivalent of Jaquar/Marc
S&F in repair chomium plated stainless steel grating, square shape, size 150mm X 150mm fixed complete all as specified and directed.
S&F stainless steel toilet paper holder with flap recessed fixed to wall with brass CP screws complete all as specified and directed. Make: Parryware catpart No. T4991A6, Jaquar catpart No. AKP35753P, Cera catpart No. F5002110
S&F brass chromium plated towel rack with lower hanger made of stainless steel, 18 inches width complete all as specified and directed. Make: Jaquar catpart No. AKP35781P, Cera catpart No. F5002101 or equivalent of Parryware/Hindware
S&F brass chromium plated double coat hook complete all as specified and directed. Make: Parryware, Jaquar, Cera, Hindware
S&F tumbler holder complete all as specified and directed. Make: Parryware catpart No. T4994A5, Cera catpart No. F5007107 or equivalent of Hindware/Jaquar
S&F in repair PVC connection 450mm long with 2 nos PTMT check nuts, suitable for 15mm bore complete all as specified and directed
S&F in repair PVC connection 600mm long with 2 nos PTMT check nuts, suitable for 15mm bore complete all as specified and directed
Dismantling of 100mm/75mm dia PVC drain pipes, jointed in cement mortar and taking out from floors or walls or from trenches complete all as specified and directed.
S&F PVC (SWR) pipe 75mm bore, single socketed in any length with rubber ring joints, fixed to wall/floor or laid in trenches complete all as specified and directed.
S&F PVC (SWR) pipe 110mm bore, single socketed in any length with rubber ring joints, fixed to wall/floor or laid in trenches complete all as specified and directed.
S&F 75mm bore PVC (SWR) junction single, (single T), equal or unequal complete all as specified and directed.
S&F 110mm bore PVC (SWR) junction single, (single T), equal or unequal complete all as specified and directed.
S&F 75mm bore PVC (SWR) bends any radius provided with/without access door complete all as specified and directed.
S&F 110mm bore PVC (SWR) bends any radius provided with/without access door complete all as specified and directed.
S&F in repair PVC (SWR) floor trap 75mm dia outlet with chromium plated grating, including jointing to waste pipe with solvent cement and embedded in cement concrete type B-0 (1:2:4) complete all as specified and directed.
M&L water proof coating by brush of cement slurry mixed with water proofing chemical of Dr. Fixit URP SBR latex or Shali SBR latex of STP Limited or Nitobond SBR latex of Fosroc, mixed at the rate as per manufacturer's instruction per bag of cement, applying on newly plastered surfaces of walls including preparetion of surfaces complete all as specified & directed. Notes: Security deposit as a guarantee against Water proofing treatment shall be retained in final bill and shall be released after 10 years. However contractor may deposit the FDR of same amount in favour of GE. If contractor fail to rectify the defect pointed out during this period in writing, the defect shall be got rectified at contractor' risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee.
M&L preparation of newly plastered surfaces of wall and applying one coat of wall care putty(3mm thick) to make the surface even & smooth and applying two coat of cement base paint of approved shade/tint complete all as specified and directed.
M&L preparation of old treated plastered/unplastered surfaces of wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, applying one coat of wall care putty(3mm thick) to make the surface even & smooth and applying two coat of cement base paint of approved shade / tint complete all as specified and directed.
M&L Atactic Polypropylene (APP) polymeric water proofing treatement to roof, at any height, using membrane minimum 3 mm thick and weighting not less than 3.6 kg per sqm, black finish reinforced with non-woven polyster (Weight not less than 150 gms per Sqm), with properties of high penetration and centre core consisting of 90 micron, high molecular high density polyethylene (HMHDPE) film consisting of five layers with thermo fusible finish laid by force application after applying compatible bitumen primer at the rate of 0.40 Ltr per Sqm, torching over laps with a propane or butane gas torch with a over lap of 100 mm at the side on transverse direction and 150 mm at the ends on longitudinal direction and sealing including a tack coat of hot blown bitumen 85/25 @ 1.2 Kg per Sqm below APP complete all as specified and directed . Note:- The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing.
M&L for carrying out water proofing treatment of Sunken floor as described here-in-below and as per manufacturer's instructions complete all as specifed & directed:- (i) The concrete/wall surfaces shall be cleaned thoroughly of all laitance, loose particles, dust, grease, etc. and any friable, unsound area shall be chipped, cleaned and threrafter pre-wetted to a saturated surfaces dried condtion. (ii) In case of pot holes/superficial cracks, the same shall be repaired with polymer modified mortar using URP as admixture 10% of cement content or equivlent and the same shall be applied on vertical area after removing of plaster upto 2 feet height. (iii) The surfaces thus prepared shall be coated by applying 2 coats of water proofing treatment of makes as listed below, in the sunken areas & extending it upto 150mm above the finished floor level with and including laying of 150mm wide strip of an open woven glass fibre mesh over the PCC benching (Gola) on the 1st coat while it is still wet. (iv) Rendering 10 mm thick in cement mortar 1:4 mixed with integral water proofing compound as per manufacturer's instructions. Make :- Hydrocem of Pidilite, Smartcare damp proof of Asianpaints, Top seal 7 of Sika Notes:- The rate includes the cost of demolition/dismantling of existing floor, sub base, PCC/Hardcore filled under floor, removal of debris, removal and replacemtnt of damaged CI/PVC pipe, floor/nahani traps etc. New items against demolished/dismantled items shall be measured and paid seperately.
Dismantling of brick/concrete tiles or terracing tiles single layers on roof and rubbish off the premises including stacking of servicable brick tiles complete all as specified and directed.
Demolition of mud phuska on roofs, any thickness including mud plastering & leeping (whether full thickness removed or only a part thereof) and rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and directed.
M&L 40 mm thick brick tiles laid on roofs, jointed and grouted flush in cement mortar 1:3 mixed with linseed/crude oil @ 5% by weight of cement over and including 15 mm thick screed bedding in cement mortar 1:6 complete all as specified and directed.
Description all as per item No 56.00 here-in-above but except brick tiles. Note: Old serviceable brick tiles retrieved from item No. 54.00 here-in-before shall be used after cleaning and washing.
M&L Plain Cement Concrete(PCC) 1:2:4, type B-0, using 12.5mm graded mechanically crushed stone aggregates over roof slab as in padding in slope to make good the depressions/undulations complete all as specified and directed.
M&L cutting out crakes to V-section in existing roofs or terracing, cleaning out, and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and directed. Notes for BOQ item No. 52.00 to 59.00:(i) Security deposit as a guarantee against Water proofing treatment shall be retained in final bill and shall be released after 10 years. (ii) However contractor may deposit the FDR of same amount in favour of GE. If contractor fail to rectify the defect pointed out during this period in writing, the defect shall be got rectified at contractor' risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. (iii) The amount of security deposit shall be calculated as per the scales laid down for calculating Earnest Money Deposit enhanced by 25% on the total amount of Water proofing treatment work (BOQ item No 52.00 to 59.00). The contractor's quoted rates for these items shall deemed to be inclusive of this aspect.
M&L preparation of newly plastered surfaces of wall and applying two coat of weather proof exterior acrylic emulsion paint (shade/tint as approved) over & including one coat of alkali resistant primer complete all as specified and directed.
M&L preparation of old treated / untreated surfaces of wall, applying two coat of weather proof exterior acrylic emulsion paint(shade/tint as approved) complete all as specified and directed.
M&L preparation of newly plastered surfaces of wall, applying one coat of wall care putty(3mm thick) to make the surface even & smooth, applying two coats of distemper oil emulsion(1st quality) of approved shade/tint over & including one coat of alkali resistant primer complete all as specified and directed.
M&L preparation of old treated / untreated surfaces of wall, applying one coat of wall care putty(3mm thick) to make the surface even & smooth, applying two coats of distemper oil emulsion(1st quality) of approved shade/tint over & including one coat of alkali resistant primer complete all as specified and directed.
M&L preparation of old treated / newly untreated surfaces of ceiling/soffits, applying one coat of wall care putty(3mm thick) to make the surface even & smooth, applying two coats of distemper oil emulsion(1st quality) of approved shade/tint complete all as specified and directed.
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete), internal dia 100mm, set in cement mortar complete all as specified and directed.
M&L plain cement concrete bed (PCC 1:3:6, type C-2 using 40mm graded mechanically crushed stone aggregates) to drain pipes of 100mm bore including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness as in floors, aprons etc, laid, bedded & pointed in any mortar and rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and directed.
M&L machine cut Granite stone slab/tiles, 16mm to 18mm thick, table rubbed and polished, as on shelves/ cooking platform/steps/pillars etc, like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick screed bed or bedding layers in cement mortar 1:4, set and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.
M&L reinforced cement concrete (RCC), type B-0, 1:2:4, nominal mix, using 12.5mm graded mechanically crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and directed.
M&L for cutting/chipping the spalling concrete surfaces of chajjas/roof protection etc. and trimming & cleaning the surface to recieve gunting and providing pressure gunnting average 20mm thick in PCC 1:2:4 type B-0 and finishing the concrete surface with 5mm thick plastering in cement mortar 1:3 even & smooth without using extra cement including welding the reinforcement to existing reinforcement complete all as specified and dirceted Note: (i) Reinforcement shall be measured seperately. (ii) Necessary scaffolding as required at site shall be provided by contrator without any extra cost and shall remove the same on completion of the work.
M&L mild steel TMT bars, 10 mm dia and over, cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
M&L mild steel TMT bars 6mm dia and over upto & inculding 10mm dia, cut to length cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups, spacer & binders complete all as specified and directed.
S&F in replacement curtain rod, fancy type, made out of 20mm bore mild steel pipe having wall thickness 1.0mm, coloured powder coated, including MS finial(knob) decorated type, best quality to suit the curtain rod, fixed at the end of curtain rod and mild steel prepainted brackets to hold the curtain rod and fixed to wall (concrete/brick) with the help of 2 Nos. 50mm long steel screws and rawl plug and suitable PVC rings(Nos. as directed), 1st quality complete all as specified & directed. Notes: (i) Two finials(knobs), Two/three Brackets & PVC rings for each cut of length of curtain rod included in quoted rates of per unit. (ii) The make/colour/shade/pattern of curtain rod, Finials, Brackets & rings shall be approved by GE.
S&F factory made Box type steel window, double shutter, glazed and wire gauzed with side hung shutters including box type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02 Nos for each leaf) duly welded, complete with glazing bars dovetailed or welded including MS fillets, including provision of mild steel guard bars complete all as specified and directed. Notes: - (i) Windows shall be fabricated as per drawing No. TD-219 Sh 1/3 to 3/3 and these drgs may be referred from GE office or from the office of CWE (AF) Ambala. (ii) Glazing, Wire cloth & MS guard bars shall be measured and paid separately . (iii) Painting to window shall be measured and paid separately however one shop coat primer included in quoted rates. (iv) Double shutter meant for providing glazed shutter as well as wire gauged shutter on outside & inside of the frame respectively. Both the shutters shall be measured as one unit. (v)Steel window shall comply with IS 1038-1983 &. Rolled steel sections for fabrication shall conform to IS 7452-1990
S&F mild steel work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified & directed
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or stainless steel wire staples complete all as specified and directed.
S&F sheet glass 3.0 mm thick ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and directed.
S&F figured glass, pin head type, 3.0 mm thick and glazing with oil putty in squares exceeding 0.50 sqm in each pane complete all as specified and directed.
M&L preparation of new steel and iron based surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over & including one coat of red oxide primer complete all as specified and directed.
Taking down chowkhats or frames not exceeding 1.5 sqm each with shutters (without taking off shutter from frames) removing from site including cutting holes for taking out hold fasts and making good disturbed portion in cement mortar 1:3, complete all as specified and directed
Description all as per item No 81.00 here-in-above but chowkhats or frames exceeding 1.50sqm but not exceeding 4.0sqm.
S&F 150 mm size handle, extruded aluminium alloy, fabricated type, anodized fixed complete all as specified and directed
S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F 200mm long, aluminium, anodized, barrel tower bolt of extruded section complete all as specified & directed
S&F factory made, solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick wooden grain printed PVC sheet reinforced with mild steel square tube, fixed in opening as per specification & drawing given in SSR Part–II complete all as specified and directed.
S&F factory made, solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wooden grain printed PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wooden grain printed PVC sheet to be fitted in the mild steel frame welded / sealed to the stiles & rails with 5mm thick & 15mm wide PVC sheet beading used inside stiles & rails and decorative PVC beading of 10mm x 10mm used and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing as per SSR Part –II complete all as sepcified and directed.
S&F mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.
M&L plain cement concrete(PCC), 1:3:6, type C-1, using 20mm graded mechanically crushed stone aggregate as in hold fasts, filling of pressed steel frame etc. complete all as specified and directed.
M&L sanding newly tarred or painted surfaces with clean sharp sand complete all as specified and directed.
S&F 1st class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles not exceeding 200 cubic centimetre each complete all as specified and directed.
M&L one coat synthetic enamel(ordinary tint) painting of small articles such as cleats, stopper etc., when unconnected with other painting or when painted in a different tint complete all as specified and directed.
S&F19 mm thick PVC board with laminates on both faces for cabinets, bottom, side walls and top walls including all necessary fiffings & fixtures to install the wire baskets. The shutters shall be fixed by using full overlay MS clips on hinges with high quality nickle plated suitable for any type of board upto 24mm thick complete all as specified & directed. Make: Kich code: CP 201 or equivalent in Dorma/Ozone for Builder's hardware. Notes:(i)The wire basket shall be measured & paid seperately. (ii) The dimension and type of cabinets should be suitable to install the wire basket. (iii) All sides of cabinet shall be measured & paid. (iv) The accessories/builder's harware of front shutter to be fitted shall deemed to included in quoted rates.
S&F wire basket made of top quality 304 grade stailess steel wire Ni-Cr plating (Ni 4%) of approved design & pattern complete all as specified & directed. Note: A BOO shall be conveyed by GE to ascertain the weight of wire basket and payment shall be made accordingly.
S&F in replacement sink made of stainless steel 1.00 mm thick steel sheet, kitchen or laboratory with plug & chain, waste coupling, washers and 32 mm bore PVC waste pipe including bedding in cement mortar to dwarf wall or including fixing cantiliver MS brackets and connecting union to pipe, over all size 485mm x 420mm & bowl size 410mm x 330mm x 160mm complete all as specified and directed.
M&L 75mm thick PCC 1:3:6, type C-2, using 40mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10mm wide, 30mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as specified and directed. Notes :- (i) The unit rate quoted shall be deemed to include for providing the concrete in alternate bays not exceeding 3 Mtrs length. (ii) 30 mm deep joints between the bays shall be provided which shall be filled with mastic filling with hot bitumen 85/25 grade and 1:2 mix volume.
S&F second class, hard wood(hollock), plain, framed, panelled shutters 35mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.
S&F second class, hard wood(hollock), glazed and skeleton shutter, 35mm thick, open rebated and prepared to receive glass/guage etc, without sash bars, with edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/guage etc, sizes of members of shutters as specified in Section 8, clause 8.24(a) of SSR part-I supplied & fitted to chowkhats complete all as specified and directed.
S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples complete all as specified and directed.
Easing of door shutter exceeding 4.0 sqm in area, cupboards shutter, showcases including fixing of screws adjusting handle, knobs etc including taking down and refixing in the same opening complete all as specified and directed.
M&L for cutting, rubbing and polishing of kota stone flooring to the entire satisfaction of Engineer-in-charge complete all as specified and directed. Note: The workmanship shall be as per clause 13.47 of SSR Part-I (Specifications)
M&L preparation of new wood and wood based surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over & including one coat of pink primer complete all as specified and directed.
M&L preparation of old painted wood and wood based surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.
BLANK
M&L for filling with broken stone of size 40mm to 80mm graded as in sunken slab and compacting, complete all as specified and directed.
S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebatedon the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.
Demolition of brick work built in cement mortar including all quoins, pillars etc but excluding ashlar facings, dressed stone work and precast articles complete all as specified and directed.
M&L Brick work with sub class B, burnt clay bricks of old size, straight or curved on plan exceeding 6 mtr mean radius, built in cement mortar 1:4 complete all as specified and directed.
M&L Brick work with sub class B, burnt clay bricks of old size, straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and directed.
Taking down copper/aluminium point wiring (light, fan, bell, socket or power) complete, including taking out/down of unserviceable fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, call bell, light fitting etc., taking credit and making good disturbed surfaces of walls/floors/ceilings complete all as specified and directed .
M&L concealed point wiring with Flame retardant low smoke(FRLS), PVC insulated unsheathed cable 1.5 sqmm with multistranded copper conductor, 1100 volt, drawn through in and including non metallic rigid PVC conduit not less than 20mm bore(having 2mm wall thickness), medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with provision of new sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness(duly painted with two coat of anticorrosive paint outside & aluminium paint inside) with decorative laminated sheet top cover 3 mm thick including Flame retardant low smoke(FRLS), PVC insulated, unsheathed, multistranded copper earth conductor 1.5 sqmm connected to common earth and earth dolly for one light point, ceiling fan/exhaust fan point controlled by one way switch 5/6 amp complete all as specified and directed.
Description all as per item No. 111.00 here-in-above but for one socket outlet point 5/6 amp controlled by one way switch on the independent board.
Description all as per item No. 111.00 here-in-above but for one socket outlet point 5/6 amp controlled by one way switch on the same board.
Description all as per item No. 111.00 here-in-above but for one call bell point controlled by one bell push on independent board.
Description all as per item No. 111.00 here-in-above but for one light point controlled by two way switch on independent board.
M&L concealed point wiring with Flame retardant low smoke(FRLS), PVC insulated unsheathed cable 2.5 sqmm with multistranded copper conductor, 1100 volt, drawn through in and including non metallic rigid PVC conduit not less than 20mm bore(having 2mm wall thickness), medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with provision of new sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness(duly painted with two coat of anticorrosive paint outside & aluminium paint inside) with decorative laminated sheet top cover 3 mm thick including Flame retardant low smoke(FRLS), PVC insulated, unsheathed, multistranded copper earth conductor 2.5 sqmm connected to common earth and earth dolly for one socket outlet point 15/16 amp controlled by one way switch on the independent board complete all as specified and directed. Note for srl No 111.00 to 116.00 :- (i) S&F of Switches, socket outlets, bell pushes and fan regulators etc. shall be measured and paid for separately. (ii) Rate quoted shall be inclusive of cutting chases in wall and making good in cement mortar 1:3 & finishing the disturbed surfaces to match with the existing surfaces.
S&F switch piano, flush type, 5/6 amp, single pole, one way complete all as specified and directed.
S&F switch piano, flush type, 5/6 amp, single pole, two way complete all as specified and directed.
S&F switch piano, flush type, 15/16 amp, single pole, one way complete all as specified and directed.
S&F socket outlet, flush type, 2 in 1, 3 pin, 5/6 amp, complete all as specified and directed.
S&F socket outlet, flush type, 2 in 1, 3 pin, 5/6 & 15/16 amp, complete all as specified and directed.
S&F ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed.
S&F lamp holder PVC/Polycarbonate insulated body with back plate suitable for angle/batten fitting complete all as specified and directed.
S&F retrofit LED bulb 9 watts , colour whight light complete all as specified and directed.
S&F bell push, flush type, 5/6 amp complete all as specified and directed.
S&F call bell, ding dong type, 230 Volts, single phase complete all as specified and directed.
S&F stepped type electronic fan regulator flush type, single pole 240 volts, 50 Hz, 100 watts, on the existing phenolic laminated sheet etc. as required complete all as specified and directed.
S&F in replacement LED tube light fitting 1x20 watt, approx four feet length including LED electronic driver, 230 volts in commmercial channel with powder coated CRCA sheet housing with opal acrylic diffuser for LED with & including one LED tubelight with high efficient LED 20 watts in aluminium housing with clear & milky diffuser including connecting with twin core twisted flexible copper conductor cable of suitable size and making necessary connection to make it functional complete all as specified and as directed. Note:- LED fitting should have PF>0.95, input voltage 160 to 270 volt, IP-20, LM-80 standard luminaries efficiency > 100 lumen/watt.
S&F in replacement indoor decorative LED batten with opal diffuser with inbuilt LED tube 10 watts and driver designed with high transmitting optics for even light distribution IP20 degree protection having length 620mm including connecting with twin core twisted flexible copper conductor cable of suitable size and making necessary connection to make it functional complete all as specified and directed. Note:- LED fitting should have PF>0.95, input voltage 90 to 300 volt, IP-65, LM-80 standard luminaries efficiency > 100 lumen/watt.
S&F in replacement Bulk head LED fitting 10 watts fixed to wall/ceiling with FI clamps, nuts, bolts, washers etc with and including LED lamp 10 watts and connecting with twin core twisted flexible copper conductor cable of suitable size not more than one mtr and making necessary connection to make it functional complete all as specified and directed. Note:- LED fitting should have PF>0.95, input voltage 90 to 300 volt, IP-66, LM-80 standard luminaries efficiency > 100 lumen/watt.
S&F decorative wall light fixture made up polycarbonate, suitable for retrofit LED lamp (spiral B-22 Base) complete including provn of flexible three core cable copper 23/0.0076 from ceiling rose to fitting terminal for making connection , fixing the fitting on wall including all necessary fixing accessories including 09 watt LED lamp complete all as specified and directed. Note:- LED fitting should have PF>0.95, input voltage 90 to 300 volt, IP-66, LM-80 standard luminaries efficiency > 100 lumen/watt.
S&F in replacement 45 watt LED security light fitting with not less than 100 lumen/watt delivered lumen efficacy supported with LM-79/80, cast alluminium alloy housing IP 66 protection, life > 50000 hours, input voltage range 110-240 volts, auto cut off at voltage exceeding 300 volts, autopower on after cutt off with time delay of less than 60 seconds, power factor more than 0.95, surge protection 5 KV internal and 10 KV external, driver current not exceeding 700 mA, driver electrical efficiency not less than 85% at constant current delivery, with secondary optic lense for every LED, with name of manufacturer / logo clearly embossed on housing of every fitting, LED fitting shall comply with IEC60598/IS10322 including GI bracket made out of 40 mm bore pipe light grade of length not less than 1.2 mtr bent to shape & suitable size of clamps, nuts, bolts, washer, fastner etc. complete all as directed and specified.
M&L in replacement concealed sub main wiring with two single core FRLS, PVC insulated, unsheathed cable,1100 volts grade, 4 sqmm nominal cross sectional area stranded copper conductor and one single core green FRLS, PVC insulated, unsheathed 4 sqmm stranded copper conductor as earth continuity cable drawn through in & including non metallic rigid PVC conduit medium grade not less than 25mm bore including accessories concealed in wall/floors/roof etc including cutting chases in wall/ceiling and making good the disturbed surfaces to match with existing surface complete all as specified and directed. Note :- Two runs of 4 sqmm cable alongwith one run of 4 sqmm cable as earth wire alongwith conduit shall be measured as one unit. The cost of cutting of chases wherever required shall deemed to included in quoted rates.
M&L in replacement concealed sub main wiring with two single core FRLS, PVC insulated, unsheathed cable,1100 volts grade, 10 sqmm nominal cross sectional area stranded copper conductor and one single core green FRLS, PVC insulated, unsheathed 10 sqmm stranded copper conductor as earth continuity cable drawn through in & including non metallic rigid PVC conduit medium grade not less than 25mm bore including accessories concealed in wall/floors/roof etc including cutting chases in wall/ceiling and making good the disturbed surfaces to match with existing surface complete all as specified and directed. Note :- Two runs of 10 sqmm cable alongwith one run of 10 sqmm cable as earth wire alongwith conduit shall be measured as one unit. The cost of cutting of chases wherever required shall deemed to included in quoted rates.
S&F in replacement sheet metal enclosures powder coated deep drawn DB with clad socket & plug top duly installed netral link adjustable din rail and connecting link with and including one single pole MCB 20 Amp, 'C' curve 240 volts, 10 kA complete all as specified and directed.
S&F in replacement sheet metal enclosure for MCB DBs, 230 volt, single pole and neutral, distrubution board, IP 43 protection, with 200 Amps rated copper bus bar and neutral link, 8 way, double door type flushed inside the wall including making good the disturbed surfaces complete all as specified and directed.
S&F in replacement MCB, single pole & neutral, 40 Amp, C curve, 10 kA capacity, 240 volts complete all as specified and directed.
S&F in replacement MCB, single pole, 5 to 32 Amp, C curve, 10 kA capacity, 240 volts complete all as specified and directed.
M&L in replacement earthing complete with galvanized steel earth plate electrode 60cm X 60cm X 6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of earth plate not less than 1.5 mtr below ground level surrounded from all sides by 15cm thick packed layer of Charcoal dust & common salt filled in alternate layers and electrode connected to GI earth lead wire 4.0mm dia upto 7.5mtr long by means of bolts, nuts, check nuts and washers of galvanized iron and connection to earthing test point & earth dolly & watering pipe medium grade GI 20 mm bore including protection pipe GI light grade 15mm bore, including wire mesh, funnel, lugs, salt, charcoal dust, excavation in any type of soil, returning filling & removal of surplus soil upto 50mtr, pit chamber shall be of PCC 1:3:6 type C-1 using 20 mm graded mechnically crushed stone aggregates and pit cover slab 50mm thick shall be of Precast RCC 1:2:4 type B-1 using 20 mm graded mechnically crushed stone aggregates reinforced with welded steel wire fabric or XPM weighing not less than 4Kg/sqm with cast iron frame including necessary form work complete all as shown in electrical plate No 3 of SSR part-I, including testing on completion at site complete all as specified and directed. Note:- Any variation in length of earth lead and protection pipe of earth lead shall be adjusted through DO. On testing if the desired earth resistance is not obtained, earthing will be generated at No extra cost, till the desired earth resistance is obtained. The chamber shall be constructed atleast 1.5 mtr away from the earth electrode.
Taking down carefullly electric meter from the existing place kept in safe custody and refixing the same after completing the work including suitable size of copper wire for necessary connection from meter to DB and meter should be fitted on & including suitable size of wooden box complete all as specified and directed. Notes:(i) The contractor will do first thing of taking down of electric meter in the presence of rep of Engineer-in-charge. (ii) Quarter wise serial number and reading of the meter should be recorded by contractor and shall be submitted to Engineer-in-charge. Quarter number to be marked by the permanent marker on meter. (iii) After the completion of the work meter should be reinstalled in the same quarter.
S&F 25 ltr capacity electric water heater(Geyser), storage type steel body with copper inner tank, 2000 watts heating element, non corrosion tank, temperature adjustment knob, red & green indicators, NRV, ISI marked, BEE 5 star rated including fixing arrangements with nuts and bolts, grouting with wall complete and making good distrubed surfaces of wall/floor etc, complete all as specified and directed.
S&F flexible hot water connection made of stainless steel thread braided on heavy duty PVC connection pipe, size 15 mm bore, 450mm long, for hot water connection for storage type water heater complete all as specified and directed.
S&F ceiling fans complete with blades, down rods and accessories, 230 volt, 1200mm sweep, minimum air delivery 210 CFM with service value 6.00 BEE, 5 star rated with brushless direct current motor (BLDC) hanging, connecting with existing point complete all as specified & directed.
S&F exhaust fan, steel body, single phase, 230 volt, 300mm sweep with blades, frame and louvers complete all as specified and directed.
S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, 230 volt, 50 Hz, RPM 1200, copper winding of sweep 200mm complete all as specified and directed.
Taking down carefully vertical TPN DB including existing MCCB and MCB from the existing place, kept in safe custody and refixing the same after completion of the work with necessary connection complete all as specified and directed.
Taking down of ceiling fan for wiring work and refixing the same in serviceable condition with PVC flexible wire 3 core with copper conductor 0.5 sqmm including painting with two coat of synthetic enamel paint compete all as specified and directed.
S&F GI tubing 40mm bore medium grade galvanised with all fitting, cutting into pieces for fixing of ceiling fan including cutting boring in wall and making good disturbed surface complete all as spefcified and directed.
For Credit Schedule refer tender documents. The amount of credit schedule shall be deducted in total quoted amount of BOQ to arrive contract sum.
singh traders
Gupta Enterprises
M/S JAISANT CONSTRUCTION CO.
M/s B.S.Jain
Bhagwan Dass and Sons
ANIL CONSTRUCTION CO.
Swami Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .