MMLB PATLIKKUHAL NAGGAR BLOCK KULLU

Amount

Excavation in drains and channels etc. in earth work including dressing of side and bed in all kinds of soil such as pick work ,pick jumper work , jumper blasting work , soft and hard blasting ,saturated soil , including chiseling or any other mixed variety of soil in all leads dewatering and or removal of slush and other incidentals , including stacking the excavated soil clear from the edge of excavation and than returning the stacked soil in all thickness of layers when required into plinths side of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Excavation in foundation trenches etc. in earth work in all kinds of soil such as pick work ,pick jumper work , jumper blasting work , soft and hard blasting ,saturated soil , including chiseling or any other mixed variety of soil in all leads dewatering and or removal of slush and other incidentals , including stacking the excavated soil clear from the edge of excavation and than returning the stacked soil in all thickness of layers when required into plinths side of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and laying, mechanically mixed and vibrated cement concrete 1:6:12 (one cement : six sand twelve graded crushed stone aggregate 40 mm (forty millimeter) nominal size) including curing as required at site complete excluding the cost of form work but including all leads and lifts of materials in foundation and plinth as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and laying, mechanically mixed and vibrated cement concrete 1:4:8 (one cement:four sand eight graded crushed stone aggregate 40 mm (forty millimeter) nominal size) including curing as required at site complete excluding the cost of form work but including all leads and lifts of materials in foundation and plinth as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and laying, mechanically mixed and vibrated cement concrete 1:2:4 (one cement:two sand four graded crushed stone aggregate 20 mm (forty millimeter) nominal size) including curing as required at site complete excluding the cost of form work but including all leads and lifts of materials in foundation and plinth and as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Random rubble masonry uncoursed but brought to course with hard stone of approved quality in foundation and plinth including racking out joints in cement mortar 1:6 one cement:six sand including carriage of material as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Dry rubble masonry in breast wall and retaining wall revetment walls and parapets etc. including carriage of material as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Boulder filling under floors including carriage of material as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Boulder filling including carriage of material as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing from work with steel plates 3.15 mm (three decimal fifteen millimeter ) thick welded with angle iron in frame 30X30X5 mm (thirty into thirty into five millimeters)so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling & removal of same for in-situ reinforced concrete and plain concrete work as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Foundation ,footing basis of columns etc. And mass concrete as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Columns, pillars ,posts and struts square, rectangular or polygonal in plan as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Beams cantilever girders and lintels side and soffits of beams, beams haunchings, cantilevers, bressumers and lintels any depth in all heights from floor as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Flat surfaces, such as soffits of the suspended floors roofs , landing and the like floors etc. up to any thickness , all as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Edges of slab and breaks in floor and walls under 20 cm wide as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and laying cement concrete 1:1.5:3 (one cement : 1.5 sand : 3 graded stone aggregate 20 mm nominal size) curing complete mechanically mixed and vibrated excluding the cost of form work and reinforcement for reinforced concrete work as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Foundation ,footing basis of columns etc and mass concrete as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Column , pillars , posts and structs square , rectangular or polygonal in plan as per direction of the Engineer-in Charge including carriage of material with in all leads andlifts and other incidentals' complete in all respect.

Suspended Floors , roofs , landings shelves and their supports , balconies beams ,girders, bressumers and cantilever for all floors levels , complete as per direction of the Engineer-in Charge including carriage of material with in all leads ,lifts and other incidentals complete in all respect.

Providing tor steel reinforcement of TATA or SAIL make for reinforced Cement concrete work including bending ,binding and placing in position and cost of binding wire complete for all floors including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and Fixing MS fan clamps of standared shape and sizeincluding cutting and making good including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Brick work using second Class common burnt clay building bricks, in cement mortar 1:6(one cement :six sand ) in super structure upto all floor levels including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Half bricks masonry using second class common burnt clay building bricks in cement mortar 1:4(one cement :four sand) in super structure up to all floor levels including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing wood work in frames of doors ,windows ,clerestory, windows and other frames wrought ,framed and fixed in position of second class deodar wood including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing 40X3mm (forty into three millimeters )flat iron hold fast 40cm(forty centimeter) long including fixing to frame with 10mm(ten millimeter) diameter bolts & nuts and wooden plugs and embedding in cement concrete block 30X10X15cm (thirty into ten into fifteen centimeter)1:3:6(one cement :three sand :six graded stone aggregate 20mm nominal size), as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing 40 mm (forty millimeter) thick panelled glazed or panelled and glazed shutters for doors windows and clerestory windows, including black enameled iron butt hinges with necessary screws of second class deodar wood including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. completes as per direction of engineer -in- charge including carriage of material within all leads and lifts and other incidental, complete in all respect.

205x16mm (Two hundred five into sixteen millimeters)

Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete as per direction of the engineer in charge including carriage of material within all leads and shift and other incidentals, complete in all respect.

150 mm X 10 mm (Three hundred Into sixteen millimeter)

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete within all lead and lifts including carriage of material and other incidental complete in all respect.

100 mm (hundred millimeters size)

150 mm(One hundred twenty five millimeters size )

Providing and fixing 100 mm (one hundred millimeters) Bright Finished hard drawn hooks eyes including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and laying spartic cermic tiles 5.5 mm (five point five millimeter )thick of khajaria,nitco or jonson make in flooring (300x300 mm size) treads of steps laid on bed of 12 mm thick cement mortar 1: 3 ( one cement : three sand) finished with flush pointing in white cement including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing Galzed tiles of size 450x300mm x 6mm (four hundred fifty x three hundred x six millimeter )thick in skirting risers of steps and dado on 12mm (twelve millimeter ) thick cement mortar 1:3 (one cement : three sand ) and jointed with cement slurry including carriage of material with in all leads lifts in all floors. The sample and pattern of tiles should be got approved from Engineer - in - charge before fixing.

Cement concrete flooring 1:2:4 (1 cement : 2 sand:4 graded stone aggregate 20 mm nominal size)laid in one layer finished with a floating coat of neat Cement 50 mm thickincluding carriage of material as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. .

Applying priming coat on new wood and wood based surfaces with ready mix paint brushing wood pink primer after and including preparing he surfaces by thoroughly cleaning oil grease dirt an other foreign matter sand papering and knotting etc complete including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Painting two coats (excluding priming coat)on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt dust and other foreign matter send papering and stopping with enamel paint other than white including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

6 mm (six millimeter)thick cement plaster to ceiling in cement mortar 1:3 (one cement :three sand as per direction of engineer-in- charge including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

15 mm (fifteen millimeter) thick cement plaster in single coat on rough / fair side of brick /concrete/stone wall for interior plastering for all floors including arises internal rounded angles chafers and / or rounded angles chamfers and/ or rounded angles not exceeding 80mm (eighty millimeters )In girth and finished even and smooth in cement mortar 1:6 (one cement :six sand ) as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

20 mm (twenty millimeter) thick cement plaster in single coat on rough / fair side of brick /concrete/stone wall for interior plastering for all floors including arises internal rounded angles chafers and / or rounded angles chamfers and/ or rounded angles not exceeding 80mm (eighty millimeters )In girth and finished even and smooth in cement mortar 1:4 (one cement :four sand ) as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Distempering (two coats )with oil bound washable distemper of approved brand and manufacture and required shade on un-decorated wall surfaces to give an even shade over and including a priming coat with alkali resistance primer of approved brand and manufacture after thoroughly brushing surface free from mortar dropping and other foreign matter and also including preparing the surfaces even and sand papered smooth priming coat with distemper primer with in all leads lifts carriage of material and other incidentals complete in all respect.

Distempering (two coats )with oil bound washable distemper of approved brand and manufacture and required shade on un-decorated wall surfaces to give an even shade over and including a priming coat with alkali resistance primer of approved brand and manufacture after thoroughly brushing surface free from mortar dropping and other foreign matter ceiling and/or sloping roofs and also including preparing the surfaces even and sand papered smooth priming coat with distemper primer with in all leads lifts carriage of material and other incidentals complete in all respect.

Providing and fixing vitreous china wash down water closet (European type W.C. pan) of Cera ,Hindware or equvalent ) with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement : one sand) seat and cover to be measured and paid for separately angle Indian universal closet as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Angle Indian universal closet

Providing and fixing vitreous china wash down water closet squatting pan (Indian type W.C. pan of Cera ,Hindware or equvalent)of size 580mm (earth work bed concrete, foot rest and trap to be measured and paid for seprately as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Orissa pattern

Providing and fixing PTMT Coloured / white high density polythelene / poly propylene 10 litres capacity (full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float,with push button,couplings for connections with inlet, outlet and ovr flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge..

Providing and fixing white plastic sheet (solid type) and cover for wash down closet with chromium plated brass hinges and rubber buffers complete including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing vitreous China bowl pattern urinal including connection the urinal with waste pipe by means of white lead mixed with choppe hemp (weste pipe to bemeasured and paid for separately.

Flat back type of size 430mm x 260mm x 350mm.

Providing and fixing vitreous china wash basin of Cera ,Hindware or equvalent with single hole for pillar tab with cast iron or steel brackets painted white including cutting holes and making good the same but excluding the fitting including cost of carriage of materials as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Flat back 560x400 mm ( Five hundred fifty millimeters into four hundred millimeters)

Providing and fixing vitreous China padedstal for wash basin complete recessed at the back for the reception of pipes and fittings including cost of carriage of materials as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing 32 mm dia (thirty two millimeters ) chromium plated brass waste for wash basin or sink including cost of carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing M.I. Union for wash basin or sink including cost of carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing CP brass bib tap (superior or heavy quality of Ess-Ess ,Jaguar or equvalent make) 15 mm (fifteen millimeters) dia with capstan head i/c CP concealing flange complete including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing 15 mm dia ( fifteen millimeters) chromium plated brass pillar tap with capstan heads i/c CP concealing flange of Ess-Ess ,Jaguar or equvalent make complete in all respects including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing CP brass angle valve 15 mm without nuts and pipe i/c CP concealing flange of Ess-ess ,Jaguar or equvalent make in all respects including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing 600 mmx 450 mm ( six hundred into four hundred fifty millimeters) beveled edge mirror of superior glass mounted on 6 mm (six millimeters) thick A.C sheet or plywood sheet and fixing to wooden plugs with chromium plated brass screws and washers complete including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing 600mm x 120 mm glass shelf with C.P. Brass bracket and guard rail complete, fixed to wooden pluges with C.P. Brass screws including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing charomium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws including cost of carriage of materials as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing CP brass towel rail of Ess-Ess ,Jaguar or equvalent makecomplete with CP brass brackets fixed to wooden plugs with CP Brass 600mmx20mm (six hundred into twenty millimeters) complete including cost of carriage of materials as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing PTMT Zet sprayer with 1.5mtr tube including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing PVC connection with brass union 300/450mm length as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

15 mm (fifteen millimeters) size.

Providing and fixing C.P. connection pipe with brass unions 45 cm length as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

15 mm (fifteen millimeters) size.

Providing and fixing brass Full way valve with wheel including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

15 mm (fifteen millimeters)nominal bore

20 mm(twenty millimeters)nominal bore

Providing and laying in trenches galvanished mild steel tubes (medium grade) tube fitting and earth work in trenches to be measured and paid seprately) as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

20 mm (twenty millimeters) nominal bore

Providing and fixing to wall ceiling and floor gal vanished mild steel tubes (medium grade) tube fitting and clamps including making good the wall and ceiling and floor as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

15 mm(fifteen millimeters) nominal bore

20 mm(twenty millimeters)nominal bore

32 mm(thirty two millimeters)nominal bore

Providing and fixing high pressure PVC spigot and socket, waste and ventilaing pipes ISI marked including fixing with approved adhesive etc. including carriage of materials as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

110 mm (one hundred ten millimeters) size.

75 mm (seventy five millimeters) size

Providing and fixing PVC water storage tank of Sintex or equvalent make of ISI :12701 Marked ,G.I. inlet and outlet connection , 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground Level (1000 litres net capacity tank)including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive ,cost of cutting and making good the wall and floors etc. complete 110 mm X 90 mm including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing on wall face PVC (D-plast) rain water, waste and ventilating pipes of workng pressure not less than 4.50kg/sqm including filling the joints with approved adhesive complete 100 MM dia pipes including carriage of materialas required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

150 mm nominal size (one hundred fifty millimeters)

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

110 mm dia (one hundred ten millimetersdia )

75 mm dia (seventy five millimeters dia )

Providing and fixing PVC double equal branch with ovel access door insert rubber washer 3 mm thick, ISI marked complete including fixing with approved adhesive etc. Complete as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

75 MM (Seventy five millimeters Dia )

Providing and fixing PVC 'P' or 'S' trap for water closet (squatting pan) ISI marked including jointing trap with the pan and PVC pipe with approved adhesive etc. as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

110 MM (one hundred ten millimeter size )

Providing and fixing on wall faces PVC D plast accessories for rain water pipes including filling the joints with approved adhesive complete as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

PVC plain bend 150 mm dia (one hundred fifty millimeters dia )

PVC shoe 150 mm (one hundred fifty millimeter dia )

Providing and fixing PVC single equal branch with ovel access door of D-plast make ISI marked insertion rubber washers 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

75 MM (Seventy five millimeters Dia )

110 MM (one hundred ten millimeter Dia )

Providing and fixing CP stop cockse ISI marked complete including fixing with approved adhesive etc. as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

15 MM (fifteen millimeters dia )

Providing and fixing PVC collars of D-plast make ISI marked including fixing with approved adhesive etc. as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

75 MM (fifteen millimeters dia )

110 MM (one hundred ten millimeters dia )

Providing and fixing PVC plain bend of D-plast make ISI marked including fixing with approved adhesive etc. as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

75 MM (fifteen millimeters dia )

110 MM (one hundred ten millimeters dia )

Making connection of galvanised steel distribution branch with galvanised mield steel main 20 mm to 40 mm nominal bore by providing and fixing Tee including cutting and threading the pipes complete as required in all lead and lift including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing stoneware gully trap grade "A" complete with CI grating brick masonry chamber in cement in mortor 1:5 and water tight CI cover with frame of 300 x 300 mm size (in side) the weight of cover to be not less then 4.53 kg and frame to be not less than 2.72 kg. as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Round mouth 150 mm x 100 mm size P or S type (one hundred fifty millimeters X one hundred millimeters

Constructing brick masonary chamber for under ground C.I. inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (one cement: five sand) C.I cover with frame( light duty) 355x610mm internal dimension total weight with cover and frame to be not less than 38kg (weight of cover 23kg and weight of frame 15kg ) RCC top slab with 1:2:4 mix (one cement: two sand: four graded stone aggregate 20mm nominal size), foundation concrete 1:5:10 (one cement : five sand: the graded stone aggregate 40mm nominal size ) and inside plaster 15mm thick with cement mortar 1:3 (one cement: three sand) finished with a floating coat of neat cement on walls and bed concrete etc. and curing as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Inside dimensions 455mm x610mm x450mm deep for single pipe line

Constructing man hole with RCC top slab with 1:2:4 mix (one cement: two sand: four graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 (one cement : four sand:eight graded stone aggregate 40mm nominal size ) inside plaster 15mm thick with cement mortar 1:3 (one cement: three sand) finished with a floating coat of neat cement and making channels in concrete 1:2:4 mix (one cement: two sand: four graded stone aggregate 20 mm nominal size) finished smooth including curing and testing as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Inside dimensions 800mm x800mm x500 mm deep including CI cover with frame (light duty for single seal pattern-1 ) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) (a) with 200 mm thick walls of brick masonry using common burnt clay buildings bricks in cement mortor 1:3 (1 cement : 3 sand)

Cutting holes through existing brick work including making good the same in cement mortor 1:6 (1 cement : six sand) per cms depth of cutting in all lead and lift in all levels and others incidentals complete in all respect as per direction of engineer-in-charge

Holes upto and including 400 square centimeter in area.

Providing and fixing PTMT coloured/white automatic flushing cistern with a pair of PVC/CI or MS bracket complete with fittings including PVC syphonic appratus mosquito proof lid, PVC union and coupling for connections with in let, outlet and cover flow pipes including cutting holes and making good the same as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Five litres capacity.

Providing and fixing PTMT waste coupling of approved quality and colour 32 mm nomonal bore as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

32 mm nominal bore (Thirty two milimeter)

Providing and fixing PVC reducer ISI marked including jointing with approved adhesive etc. as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

150 mm x 110 mm dia (one hundred fifty milimeter x one hundred ten milimeter)

Providing and fixing vitreous china division plate for urinals 600x300 mm as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge..

RANDHIR JAMWAL

Mr. Sohan Lal

GAGAN DEEP