DGM/ED-KH/24-25/06, Dt. 27.03.25

Amount

Supply of the following

ACSR Weasal (6/1/2.59mm)

PVC CABLES (SINGLE CORE) 120 mm2

XLPE CABLE (HT) 3Cx120 sq. mm

LT AERIAL BUNCHED CABLE 3x50+1x16+1x35 sq.mm

ACCESSORIES OF LT AERIAL BUNCHED CABLE IPC Main 16-95 Sq. mm & Tap 4 to 35(50) Sq. mm

ACCESSORIES OF LT AERIAL BUNCHED CABLE -Eye Hook

ACCESSORIES OF LT AERIAL BUNCHED CABLE - Pole clamp (25/50 mm)

Rewireable Porcelain Cut out 200 Amp

11KV Polymer composite 45 KN Disc Insulator

11KV Polymer Pin Insulator

11 KV Stay insulator

11KV Disc fittings Up to 7/3.8mm, 2-U Bolt type

Stay set complete

GI Stay wire stranded stay wire 7-4mm

NUTS AND BOLTS (Assorted)

DANGER PLATE H.T.

DANGER PLATE L.T.

LUGS 120 mm2 - 12

GI Stay clamp 50x6mm

Suspension clamp Assembly with straps & buckle (25-50 mm)

Dead end clamp Assembly with straps & buckle (25-50 mm)

11 KV Gang Operated Switch (Porcelin type)

11 KV Drop out Switch (Porcelin)

11 KV Covered Conductor (70 SQMM)

11KV VCB Panel rated Voltage 11KV-12KV, Rated Current 630A 800 1250 A, Nos of Pole 3 Poles, Frequency 50Hz with supply of power pack battery

9 Mtr long Steel Tubular Pole 410 SP 28, Top & Middle pole painted with red oxide primer and bottom section Hot Dip Galvanised

8 Mtr long Steel Tubular Pole 410 SP 15, Top & Middle pole painted with red oxide primer and bottom section Hot Dip Galvanised

Aluminium Lugs 70mm sq

Aluminium Lugs 95mm sq

Aluminium Lugs 120mm sq

Aluminium Lugs 185 sq mm

Distribution Box 3 phase

MS Channel(100x50x50x6mm)

MS Channel(75x40x40x6mm)

MS Angle(65x65x6mm)

GI Strip 25x3mm for DTR Earthing

PVC Sleeves

Erection

Erection of 9 mtrs length of Steel Tubular POLE at any kind of soil , including excavation of earth, refilling the pit with soil upto the ground level, ramming and making complete in all respect.

Erection of 8.0mtrs length of Steel Tubular POLE at any kind of soil , including excavation of earth, refilling the pit with soil upto the ground level, ramming and making complete in all respect.

Erection of Stay set direct in earth complete with 19mm x 1800 mm long stay rod, anchor plate of size 300 x 300 x 8 mm ,thimble, turn buckle, 7/3.15 mm dia G.I Standed stay wire and stain insulator etc. with Supply of M.S.Clamp,Nuts & Bolts etc. as required. and making complete in all respect

Erection of M. S. Angle Cross-Arm, 1.5 to 2.5 Mtr. Long 65x65x6mm (Excluding the cost of Bracket Clamp, Nuts & Bolts)

Erection of M. S. Channel Cross-Arm, 0.3 to 2.8 Mtr. Long 75x40x40x6mm (Excluding the cost of Bracket Clamp, Nuts & Bolts)

Erection of M. S. Channel Cross-Arm, 2.8 Mtr. Long 100x50x50x6mm (Excluding the cost of Bracket Clamp, Nuts & Bolts)

Erection of 11KV Pin insulator along with Pin.

Erection of 11KV Single Disc insulator set along with necessary fittings

Earthing with G.I pipe 2.5mtr. Long and 40mm dia, including excavation, refilling with alternate layer of salt & Charcoal as per drawing (excluding supply of G.I.Pipe, Salt & Charcoal, Gi wire, nuts &boIts, etc. as required)

Laying of 8 SWG GI wire at 300mm below the ground level for earthing of Sub-Station equipments from the earth electrode

Erection of DANGER PLATE on OH lines (11KV/415VoIts)

Fabrication of Cross-Arms by MS Channel/MS Angle as per specification

Laying and Stringing of 1KM (Single Conductor) ACSR 6/1/2.59 mm dia WEASEL including hoisting and binding etc. Complete as required.

Erection of 9KV, 5KA single pole metal oxide gapless type LA, including necessary connection complete as per technical specification

Erection of 11KV DOF unit set of three nos. including necessary connection complete as per technical specification. (Excluding the cost of back clamp, Nuts & Bolts)

Erection of 11KV 200 Amp. GOS unit set of three nos. including necessary connection complete as per technical specification.(Excluding the cost of back cIamp,Nuts & Bolts)

Installation/Positioning of 11/0.430KV,3-Phase 200KVA to 250KVA of Distribution Transformer on Pole with necessary connections & fitting fixing of all allied accessories components as required for making complete in all respect for energizing.

Carriage of 11/0.430, 3-Phase 200KVA/250KVA by Mechanical Transport from the Site / Store/ Worshop to working site Vis-a-vis including loading, unloading and placing on base, as required,b) Beyond 25 KM upto the lead of 50KM From MMD Store to Sub Division Store

Fitting-Fixing of Service main 1/3Phase distribution Box of 1.1 KV grade on PCC/Steel Pole with the help Pole brackets or Steel Straps & buckIes as per direction of Engineer-In-Charge.

Supplying and Making Indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as requiredUp to 150sqmm

Fixing of cut out (Set of 3nos)on wooden plank (preferably korai wood) of size 24"x10"x1.5"&cable connection with termination by lugs/thimbels) complete (i/c. supply of wooden plank, screws & M.S. clamp excluding cost of thimble)

Supply of febricated clamps of assorted size of MS flat (50x 6mm) with double coat of red oxide primer coating.

Supply of 2.5mtr. Long, 40mm dia G.I.Pipe, Make: TATA / JINDAL)

Supply of 60Kg Salt & 55Kg Charcoal ( For 1 Pit).

Positioning of cable drum, removing of cable from drum and laying, hoisting & drawing of AB Cable 3X50+1x16+1x35 sqmm as per direction of Engineer-In-charge.

Erection & Fitting-Fixing of Insulated suspention Clamp including Pole clamp, Eye hook for cable massenger of 1.1 KV grade on PCC/Steel Pole with the help Pole brackets or Steel Straps &buckIes asper direction of Engineering In-Charge.

Grouting of Steel Tubular PCC Pole of ratio 1:2:4 (1cement:2 riversand:4 Jhama brick Aggregate of 20mm. Nominal size) including supply of cement, sand and brick aggregate. Complete with excavation, refilling of each, ramming along with centering and shuttering as required

Maintaining adequate clearance from overhead live conductors by Trimming of tree branches for Way Leaves

Erection & Fitting-Fixing of Insulated Dead end enchoring Clamp including Pole clamp, Eye hook for cable massenger of 1.1 KV grade on PCC/Steel Pole with the help Pole brackets or Steel Straps &buckIes asper direction of Engineering In-Charge.

Supplying and Making Outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as requiredUp to 150sqmm

11KV VCB panel for outgoing feeder complete - For replacment / Extension in existing 11 kV feeder panel incuding fitting and fixing, cable terminations, bus extensions, adopter panel (if required) and including all accessories complete.R&M of 33/11kV SS

Civil work for construction of Transformer base and Fencing of Hard drawn steel wire fabric as per requirement and direction of Engg. In Charge

Stringing of 11KV Covered Conductor 70 sqmm (all 3 phases) as per specification and approved drawings, stringing of covered conductors at proper tension/ sag, fitting and fixing of all accesories Piercing Connectors , Jointing Sleeves, insulator binding using approved Non-metallic helical ties, jumpering, connections to other lines etc. complete in all respect.

Laying of PVC insulated and PVCsheathed / XLPE power cable of 11KV grade (120 Sq mm) in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Trench size: Width: 350 mm, Height: 1200 mm / Sand (Cushioning): Height: 250 mm, Width: 350 mm / Protection: Double layer bricks

UTTAM NAG (BID ID -172867)

NIKHIL DAS (BID ID -172962)

Dilip Kumar Kar (BID ID -172900)