Loading
Loading…
Loading…
Tender Value
₹2.6 L
EMD Value
₹5,195
Closing Date
31 Aug 2026, 3:00 pm
Executive Engineer
Executive Engineer Mechanical Division
Providing Installation and commissioning of 1 5 2 0 TR Split type air conditioning system in different rooms of Modern Psychiatric Hospital Agartala during the year 2026 27 2nd Call
2026_CEPWD_76167_1
46_EE_DNIT_MECHDIVN_AGT_2627
Open Tender
Electrical Works
Works
15 days
Agartala
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,000
₹5,195
21 Aug 2026
21 Aug 2026
31 Aug 2026
21 Aug 2026
31 Aug 2026
21 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing star rated (Minimum 3 star with applicable ISEER according to current industry standard) high wall split type AC machine (Condenser & evaporator coil pipe should be made of copper) of approved make and technical specification with hermatically sealed compressor operating on non CFC refrigerant, pipe as supplied with AC machine, necessary plug top for IDU (with 01 year overall machine and compressor warranty) suitable for wall mounting conforming to IS1391(part-II) specification (Except power consumption) suitable for operation on 230 volt, 50 HZ, single phase AC supply capable of performing a)cooling b)dehumidifying c)air circulating d)filtering having rated cooling capacity | |||||
| 1.01 | 1.5 TR high wall split type AC machine (Minimum rated cooling capacity should not be less than 4500 Kcal/hr or 18000 Bthu/hr or 5250 watt) | 4 | Nos | - | - |
| 1.02 | 2.0 TR high wall split type AC machine (Minimum rated cooling capacity should not be less than 6000 Kcal/hr or 24000 Bthu/hr or 7000 watt) | 1 | No | - | - |
| 2 | Standard installation, testing and commissioning of 1.5/2.0 TR Split including hole cutting, finishing etc. as per direction of the Engineer-in-charge. | 5 | Nos | - | - |
| 3 | Fabrication of M.S platform for placement of condensing unit by using M.S angle of (50x50x5) mm size base plate, nuts and bolts/ universal bracket (GSS) for ODU of split type ACs including all accessories for onsite installation i/c painting, fitting, fixing, grouting by cement mixture as per direction of the Engineer-in-charge. | 5 | Nos | - | - |
| 4 | Supply, installation of additional length of copper pipe beyond 10 ft. length of appropriate size as suitable for 1.5/2.0 TR Split AC as per manufacturer guidelines (5/8" and 1/4" diameter etc) for both suction and liquid line with insulation and necessary wiring between indoor and outdoor units. | 30 | Mtr | - | - |
| 5 | Providing hard PVC pipe of best quality of 25 mm diameter including necessary clamping and fitting for draining of condensate water from indoor unit as per direction of the Engineer-in-charge. | 50 | Mtr | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.75 MB
DNIT.pdf
Tender Documents • 3.08 MB
BOQ_77536.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].