PROVISION OF CHAIN LINK FENCING AROUND LEASE LAND AT GUJARAT MARITIME BOARD (GMB) JETTY AND BARBED WIRE FENCE WITH RCC POLES ALONGWITH ACCESS GATE FOR NEWLY ACQUIRED 8.7 ACRES AAI LAND AT NAVAL AIR ENCLAVE

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, Soft/loose soil complete all as specified and directed.

Excavating in post holes (or similar holes) each not exc 0.50cum, getting out, returning, filling, in and ramming earth or broken rubble mixed with earth around in layers n.exc. 25cm, watering and removing surplus soil to distance n exc 50 m and making good surface in hard/ dense soil complete all as specified.

Earth work in all kind of soil excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and directed.

Earth work in all kind of rocks excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft / disintegrated rock, complete all as specified

Removing of excavated material 250 m& not exc 500 m depositing & levelling, where directed at a level n. exc 1.5 m above the straight point.

M & L Cement concrete in foundations, filling and mass concrete 1:3:6 Type C-2 using 40 mm graded aggregate, complete all as specified and directed.

M & L Pre-cast cement concrete (1:3:6), type-C1, (20mm graded aggregate) block masonry with solid blocks, exc. 10cm in width and setting in mortar, completebuilt in CM (1:4), complete all as specified and directed.

Providing, cement concrete ( 1:3:6 ), Type C1 ( 20 mm graded aggregate) in coping including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M & L for cement concrete, Type D2 1:4:8 (40mm graded ftone aggregate) as in foundations, filling and mass concrete complete all as specified and as directeed.

M&L for providing RCC type B1 1:2:4 (20mm graded agg ) in precast post fencing post staining or terminal post strut etc for fencing average sectional area exc 100 sqcm but n'exc 250 sqcm with or without chemfered angles and flat splayed rounded or meterd tops as directed and fixed.

M&L for cement concrete, type B1 1:2:4 (20mm graded agg ) in lintel upto 1.5 m clear span cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, beds plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed all as specified.

M & L Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed

M & L RCC- M-25 (Design Mix) using 20mm graded aggregate in foundation, raft complete, plinth beam, complete all as specified and directed.

M & L Form work for fair finished surfaces of concrete measured flat for foundation and Footing & plinth beam, complete all as specified and directed

M&L for RCC (design mix) M-25 using 20 mm graded stone aggregate as in Column etc. , complete all as specified and directed.

M & L Form work for fair finished surfaces of concrete measured flat as in as pillars, posts, struts, piers, columns and stanchions complete all as specified and directed

M&L RCC M-30 design mix for foundation, including rafts, footings, foundation beams, plinth beams, base for columns, etc basement slabs, under-reamed piles and mass concrete complete all as specified.

M&L for RCC M-30 concrete design mix (using 20mm graded stone aggregate) as in coin and pier post etc, complete all as specified and directed.

M & L rendering 15mm thick,on fair faces of stone masonry surfaces or concrete surfaces on wall in cement mortar 1:4 finished even & smooth with out using extra cement , complete all as specified and directed.

M&L for mild steel CRS TMT bars 6 to 8 mm dia and over cut to length bent to shape required including crancking bending spirally for hooping and including mild steel wire (annealed) not less than 0.9 M dia or securing with clips, complete all as specified and directed.

M&L for mild steel CRS TMT bars 10mm dia and over cut to length bent to shape required including crancking bending spirally for hooping and including mild steel wire (annealed) not less than 0.9 M dia or securing with clips, complete all as specified and directed.

M & L for mild steel CRS TMT bars 5mm dia and over, incl 10 mm cut to length, bent to shape required, cranking, bending hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia in stirrups, spacers and blinder complete as specified and as directed

Supply only chain link M.S. galvanised fencing any size or type, complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire

S & F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified and directed.

S & F Mild steel screw bots (machine made ) with hexagonal or square heads at one end and screwed the other each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 05 cm but not exc 10 cm and 10 mm dia, complete all as specified and directed.

S & F for Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M & L for framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, framework of water tanks and similar work conforming to Fe. 290, Gde-E-165 including portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc for ornamental and intricate design, complete all as specified and directed.

M & L 15mm Thick Plaster on fair faces of brick work or concrete surfaces in Two layers 10mm Thick in CM (1:4) and 5mm Thick in CM (1:4), complete all as specified and directed.

Integral waterproofing compound supply only

M & L Two coats of cement based paint over a coat of primer including preparing surfaces plastered, complete all as specified and directed.

M&L for preperation of newly plastered wall surfaces / concrete surface, applying two coats of cement base on walls, complete all as specified and directed.

M&L for Framed work as in gates of angle or other section with gusset plates, rails, braces, etc., as specified and as directed (for fabrication of gates) of Fe-410W, Gde-E-250 complete all as specified and directed.

S&F Mild steel bolts purpose made with hexagonal or square heads (dia n exc 12mm) at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 30 cm long complete all as specified and as directed.

M&L for preparetion of new steel surfaces of any description over 10 cm width or girth and also applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer - in - Charge.

M&L 20mm thick Granite (as colour approved by GE) tiles machine cut, bedded and jointed with grey cement slurry in skirting/ dado, floor laid over cement and pointed with white cement with ad mixture of pigment to match the shade of granite stone including grinding and polishing with 15mm thick screed in cement mortar (1:4) complete all as specified.

SHREEJI ENTERPRISE (BID ID -3490426)

Bharat Enterprise (BID ID -3490273)