Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.8 LAccepted-AOC 67 PATEL NAGAR NEW MANDI MUZAFFARNAGAR INDEX NO C 630 HQ CE WC | L1 | Accepted-AOC ok | |
| 2 | L2₹32.8 L+₹1,000.60 (0.03%)Rejected-AOC D 89 SHASTRI NAGAR MEERUT UTTAR PRADESH PIN 250004 | MEERUT | MEERUT | UTTAR PRADESH | 250004 | L2 | Rejected-AOC ok | |
| 3 | L3₹33.9 L+₹1.1 L (3.22%)Rejected-AOC H NO 3927 SHAH COLONY SECTOR 8 NEAR NHPC COLONY SAILI ROAD TEHSIL DISTT PATHANKOT 145001 | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L3 | Rejected-AOC ok | |
| 4 | L4₹34.1 L+₹1.3 L (4.01%)Rejected-AOC 2 2407 GILL COLONY NARAINPURI SAHARANPUR UP | SAHARANPUR | SAHARANPUR | UTTAR PRADESH | 247001 | L4 | Rejected-AOC ok | |
| 5 | L5₹34.3 L+₹1.4 L (4.36%)Rejected-AOC H NO 670 SECTOR 10 PANCHKULA HRY 134115 | PANCHKULA | HARYANA | 134115 | L5 | Rejected-AOC ok |
Tender Value
₹43.5 L
EMD Value
₹87,000
Closing Date
29 Nov 2022, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Dehradun
HQ CWE Dehradun
PROVN OF 15 X OR SINGLE ACCN AT 42 INF BDE CAMP MT COMPLEX UNDER AGE BR-II OF GE DEHRADUN
2022_MES_560523_1
9754/DDN/E8
Open Tender
Civil Works
Item Rate
180 days
Dehradun
As per tender documents
5 documents required · 5 mandatory
₹500
GE Dehradun
₹87,000
Yes
12 Jan 2023
31 Oct 2022
1 Dec 2022
31 Oct 2022
29 Nov 2022
15 Nov 2022
Amount
Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out complete all as specified and directed.
M&L for plain Cement concrete 1:4:8 Type D-2 (40 mm graded crushed stone aggregate) in foundations, filling and mass-concrete complete all as specified and directed.
Use and waste for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.
Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.
Use and waste for Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.
M&L for Reinforcement cement concrete in 1:2:4 type B-1 (20 mm graded crushed stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L for Reinforcement cement concrete in 1:2:4 type B-1 (20 mm graded crushed stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
M&L for Reinforcement cement concrete in 1:2:4 type B-1 (20 mm graded crushed stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for Mild steel TMT bars 5mm dia and over but including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
S&F mild steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.
S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self-tapping screws as specified.
S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self-tapping screws as specified.
Providing & fixing tiled false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or Electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grams, both side inclusive
and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and cross 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips or 3mm dia GI wire spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm, all 'T'' sections shall be pre-painted with polyester paint and black painted groove at centre of size 4mm depth and 4.5mm width, all complete at all heights as per direction of Engineer-in-Charge.
M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.
M&L for Brickwork with sub-class `B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.
Returning, filling to excavated earth including spreading, levelling, watering and well ramming in layers n. exc 25 cm all as directed by Engr-in-charge
Removing excavated material n. exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above the starting point complete all as specified and directed.
M & L 15 mm thick rendering on other than fair faces of brick work or concrete surface in cement mortar 1:6, surface finished even and smooth without using extra cement complete all as specified and directed.
M & L 15 mm thick rendering in cement mortar 1:4 on brick work or concrete surface, surface finished even and fair complete all as specified and directed.
M&L for preparation of wall and applying interior grade wall care putty 1 to 1.50 mm thick to make the surface smooth complete all as specified and directed.
M&L for preparation of wall and applying exterior grade wall care putty 1 to 1.50 mm thick to make the surface smooth complete all as specified and directed.
M&L for preparation of new surface of wall and applying two coat of oil bound distemper over a coat of alkali resistance primer complete all as specified and directed.
M&L preparation of new plastered surfaces of external wall and application two coats of 1st quality exterior emulsion weather coat paint over a coat of alkali resistant priming paint complete all as specified and directed.
S&F Pressed steel frames for size 125x60 mm doors with one or more rebates made out from 1.25mm thick PBI sheet including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied complete all as specified and directed.
M&L for RCC 1:3:6 type C-0 for filling of door frame including necessary formwork, etc complete all as specified.
S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed.
S & F 35mm thick second-class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitred and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I, section 8 clause 8.24 (a) and as directed.
S&F Factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specified and drawing complete all as specified and directed.
S&F 28-30mm thick moulded WPC factory made 100 % solid (conforming as per IS-4020) made from lead free single extruded with 2,4, or 6 raised panel design on the front side with 10 mm deep mould on single with grain texture and back side plain with density not less than 600 Kg/cum, Manufacturer by an ISO: 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified and directed.
S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.
S&F 200 mm long, solid in one-piece stainless steel 202 grade bright finish barrel tower bolts 10mm dia shoot complete all as specified and directed.
S&F 150 mm long, solid in one-piece stainless steel 202 grade bright finish barrel tower bolts 10mm dia shoot complete all as specified and directed.
S&F 150mm size solid in one-piece stainless steel 202 grade bright finish handles, D type and fixed with stainless steel screws complete all as specified and directed.
S&F 100 mm size stainless steel butt hinges medium weight cold rolled fixed/ welded to frame complete all as specified and directed.
S&F stainless steel sliding door bolts SS204 grade, hasp and staple type with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300mm long complete all as specified and directed.
S&F Floor door stopper of Aluminium alloy body and tongue, overall length of cover plate 150 mm, anodized, with hard drawn steel spring, fixed to shutters complete all as specified and as directed.
S&F factory made steel window made out of steel square/rectangular hollow section including MS hinges, steel handle and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed. Note: -Sample and design of steel window shall be approved by Garrison Engineer before execution of work
S&F factory made steel window made out of steel square/rectangular hollow section including MS hinges, steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. Note: -Sample and design of steel window shall be approved by Garrison Engineer before execution of work
S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.
S&F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.
M&L for preparation of newly steel Surfaces of any description over 10cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of new wooden surface 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L for Hardcore of gauge exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/ rammed to a true surface complete all as specified and directed.
M&L anti-termite treatment for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.
M&L anti-termite treatment for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.
M&L anti-termite treatment for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.
M&L anti-termite treatment for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.
M&L for 25 mm thick cement concrete in 1:2:4 type B-1 (20 mm graded aggregate complete all as specified and directed
M&L for 100mm thick cement concrete 1:4:8 type D-2 40mm graded stone aggregate complete all as specified and directed.
S&F vitrified ceramic tiles, light shade, 10mm thick n. exc 0.36 Sqm each in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 15mm thick in CM 1:6 complete all as specified and directed.
S&F non-skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n exc 0.18 Sqm in floors etc. in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match of coloured tiles over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
S&F non-skid ceramic tiles 7-8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n exc 0.18 Sqm in floors etc. in skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match of coloured tiles over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.
S&F ceramic glazed colured/design tile in vertical surfaces (300x 450mm) x 7mm thick on vertical surfaces such as dado and skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.
S&F 15mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.
All as per item No 56 above but 20mm dia bore pipe.
S&F in repairs vitreous chinaware wash down water closet pan pedestal pattern white excluding fixing bolts but including jointing to flushing cistern and flush pipe anti syphonage pipe including Heath faucet etc complete all as specified and directed.
S&F 15mm bore chromium plated fancy type bib tap of cast copper alloy with crutch of butterfly handle, screwed in iron pipe complete all as specified and directed.
S&F chromium plated stop valves/ angle valve cast copper alloy, screwed down both high pressure, with crutch or butterfly handle, screwed both ends fixed, 15mm bore complete all as specified and directed.
S&F15mm nominal internal bore PVC connection 450mm long with two brass nuts and PVC washer complete all as specified and directed.
S&F 10 ltr capacity PVC low level flushing cistern including PVC syphon and float valve with PVC long band for out let connection of cistern with WC complete fixing the cistern with wall in pressured connecting with WC complete all as specified and directed.
S&F vitreous china wash hand basin, white flat back, size 550x400mm excluding taps, waste pipe chain and plug and porcelain but including brackets complete all as specified and directed.
S&F Brass chromium plated wall mixer complete all as specified and directed.
S&F CP central hole basin mixer fancy type 15mm dia complete all as specified and directed.
S&F brass chromium plated overhead shower with shower arm complete all as specified and directed.
S&F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20 mm brass float valve with PVC ball complete all as specified and directed.
M & L 75mm thick PCC 1:3:6 type C-2 as in plinth protection, finished even and fair complete all as specified.
S & F 75 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall including dismantling of old pipes complete all as specified.
S & F in repair 110 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall including dismantling of old pipes complete all as specified.
S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed
M&L for construction of 50 users septic tanks complete all as specified in PS here in after and shown on drawing No CEBZ TD Drawing No. 217 Sh 1/7 to 7/7.
Taking out old damaged SGSW pipes from existing lines including necessary excavation in trenches and getting out in any type of soil, supply, laying and jointing of new SGSW pipe type 'A' 150mm dia in any length including packing under and haunching against the sides of pipes in PCC ( 1:4:8) type D-2 and returning, filling in disposal of surplus soil to a distance n exc 50m complete all as specified and directed.
S&F aluminium anodised partition (Single for glass) and frame with aluminium section with and including glass (as specified below), Aluminium sections shall be of size as given below:- Frame: 50 X 50 X 1.08 mm thick, Top/bottom and side style/ rails of partition. Glass: 4.8 mm thick rectro reflected glass fixed with rubber gasket with aluminium beading and making good of wall surface with matching to existing surface complete all as specified and directed.
M&L for point wiring with1100 Volts, grade 1.5 Sqmm. (nominal area), PVC insulated but unsheathed multi stranded copper conductor single core FRLS cable drawn through and including non-metallic rigid PVC concealed/ conduit on wall as required One light point controlled by one-one-way switch complete all as specified and directed.
All as per item No 76 above but One fan point controlled by one-one-way switch through Regulator.
All as per item No 76 above but but One three pin 5 Amp socket on same board with other switches.
All as per item No 76 above but but One three pin 5 Amp socket on independent board.
All as per item No 76 above but with 2.5 Sq.mm. cable for one 3 Pin 15-amp socket on independent board complete.
S&F switch piano flush, button type 5 Amp SP 250V AC complete all as specified and directed.
S&F switch piano flush button type 15 Amps SP 250V AC complete all as specified and directed.
S&F socket outlet 2-in-1, 5 Pin 5 Amps 250V AC complete all as specified and directed.
S&F socket outlet 2-in1,3 pin 5- and 15-Amp flush type 250V AC complete all as specified and directed.
S&F ceiling rose surface Bakelite 3 terminals of size 65x25mm. complete all as specified and directed.
S&F LED tube light along with fixture, 20 W complete all as specified and directed.
S&F Bed Lamp along with 9-Watt Bulb complete all as specified and directed.
S&F LED Tube light small 2 feet Mirror light fitting tube light alluminium extruded body with integrated electronic driver along with fixture, 10 W complete all as specified and directed.
Supply and fixing LED street light fitting 60-Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
S&F BLDC Ceiling Fan complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated PVC AC single Phase 230 V / 240V 50 Hz complete connecting up ceiling rose to connector block of fan including fabricating and fixing of Fan hooks from ceiling truss/angle iron, required length of down rods (As per site requirement) and necessary nuts and bolts complete all as specified and directed.
S&F in replacement of exhaust fan 150 mm PVC body made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding complete with louvers, shutters and connecting up ceiling rose to connector block of fan including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block complete all as specified and directed. Note: (i) Old unserviceable fan shall be deposited to MES store. (ii) Test certificates of fan shall be submitted by the contractor to the GE.
S&F Wall fans 230 volts single phase oscillating 400 mm sweep complete all as specified and directed.
S&F Water heater storage type, electric, capacity 25 litres AC single phase 230/ 240 V o and connecting up including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block complete all as specified and directed. Note: (i) Old unserviceable heater shall be deposited to MES store. (ii) Test certificates of heater shall be submitted by the contractor to the GE.
S&F Sheet metal enclosures with socket plug top and MCB' SPN enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB complete all as specified and directed.
S&F sheet metal enclosures TPN 415 Volt 4 way with suitable rated bus bar for Single door IP-43DB’s complete all as specified and directed.
S&F Sheet metal enclosure SPN for DB's when MCB's to be used 8 way with 200 amps bus bar double door complete all as specified and directed.
S&F MCB TPN 415 Volt 10 KA 63 Amp conforming to IS complete all as specified and directed.
S&F MCB SPN 240 Volt 10 KA 40 Amp conforming to IS complete all as specified and directed.
S&F MCB SP (single pole) 240-volt 10 KA 5 to 40 Amp, conforming to relevant IS complete all as specified & directed.
M&L for submain wiring with 3 runs(1 run for Phase+1 run for Neutral &1 run for Earth) of 4 Sqmm single core, PVC insulated, unsheathed, multi stranded copper conductor FRLS cable 1100 volts grade drawn through and including concealed wiring with PVC conduit pipe of medium duty not less than 15 mm dia including necessary steel conduit specials and connecting with suitable size thimble, and making good surface of disturbed wall/ceiling/floor as match with existing complete all as specified and directed. Note:-3 runs of 4 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length.
All as per item No 100 here in above, but 3 run of 6 Sq mm and one run of 6 Sqmm copper conductor as earth wire complete all as specified & directed. Note: -3 runs of 6 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one-unit length.
M&L for earthing complete with GI or steel earth plate electrode 600x 600x6mm thick buried directly in ground (earth pit not less than 2.25 Mtrs below ground level) with top edge of earth plate not less than 1.5 Mtrs below ground level connected to GI earth strip 4 Sqmm by means of nuts,
abolts, thimbles, chuck nuts, washers of GI or steel, including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, with fair finish internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge of (0.68mm) 8 mesh per liner inch, 80 mm thick RCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I and specified including provision of earth wire protected by 40mm dia medium grade GI pipe and watering pipe shall be 20mm bore medium grade GI pipe, and including all excavation and earth work & connecting the earthing to an earthing test point /transformer neutral/body/ Lt panel etc. and testing on completion, complete all as specified & directed.
Supply, laying, connecting and testing in replacement of cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured electric cable (heavy duty) with stranded aluminium conductors, 1100 volts grade of size 50 Sqmm 3½ core complete all as specified and directed. Note:- Test certificates of cable shall be submitted by the contractor to the GE.
Supply & laying Sand coarse dry as in cushioning of underground electric cable in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable) and gently punned down to 18cm thickness all complete all as specified and directed. Note: - Only punned down sand thickness 18 CM shall be measured and paid
Supplying and laying old size bricks, laid flat ie length of brick shall be laid across the cable, common burnt clay building bricks sub class `B' designation 75 complete all as specified and directed and testing on completion complete all as specified and directed.
Cutting existing road/hardstand of any type by using crow bar chisel up to a depth of 30 cm for laying GI pipe including making good the surface by returning filling watering ramming in layers 150 mm thick PCC 1:2:4 over 200 mm thick hard core of broken bricks/stones over returning filling watering ramming in layers not exceeding 25 cm thick complete all as specified and directed.
M&L for GI tubing medium grade, (ISI marked), 50mm dia bore with all fitting/accessories for protection of cable on pole/wall and under road crossing including clamps, nut bolt etc complete all as specified and directed.
MOHAN LAL GUPTA
M/s Pradeep Kumar
RAMAPATI ENGINEERING SERVICES
IMPERIAL ENGINEERS
M/s RAM RATAN AND SONS
M/S C S AITHANI
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .