ADDN/ALTN OF GYM AND CHEMISTRY LAB OF RIMC UNDER AGE B/R-II OF GE DEHRADUN.

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concretebut excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and ditected.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and ditected.

Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc. complete all as specified and as directed.

M&L for with 15 mm thick rendering on of brick work or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth with using extra cement complete all as specified and as directed by Engr-in-Charge.

M&L forith 15 mm thick rendering on of brick work or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth with using extra complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of wall and applying two coat of oil bound distemper over a coat of primer including 1 to 2mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment of walls incl corners and applying two coats of distemper oil emulsion over applying of1-1.5mm thick wall care putty finish wall surface even & smooth by roller complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls (plastered) by brooming down with steel wire brush, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and finally clean with sand paper complete all as specified and directed.

M & L finishing walls with Acrylic Smooth exterior paint of required shade : New work /Old (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

M&L for applying one coats of distemper oil emulsion and surface including preparation of surface complete all as specified and directed.

M&L for two coat of synthetic enamel paint over a coat of primer including preparation on new steel surfaces of any description over 10 cm width or girthcomplete all as specified and directed.

M&L for preparation of old painted surfaces of wood of any description over 10 cm width/girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down Chowkhats with shutter of any description (without taking off shutter from frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and as directed by Engr-in-Charge.

S&F 150 mm long, solid in one piece stainless steel barrel tower bolts gde-202 complete all as specified and directed.

S&F 125mm size solid in one piece stainless steel handles,gde-202 cast D type, fixed in stainless steel screws all as directed complete all as specified and directed by Engr-in-Charge.

S&F 100 mm size stainless steel butt hinges medium weight cold rolled fixed/ welded to frame complete all as specified and directed.

S&F stainless steel sliding door bolts 204 grade, hasp and staple type with bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 250mm long complete all as specified and ditected.

Hacking out old broken glass ( any thickness , size, quality, or description) from wooden frame glazed with putty or fixed with beads all as specified and directed

M & L sheet glass ordinary quality 4mm thick and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc. .5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed.

M&L form work to edges of concrete flats, treads, break in floor & roofs n.exec 20 cm wide horizontal or sloping and smilar works complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed.

S&F TMT MS bar 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia complete all as specified and directed.

S&F TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing complete all as specified and directed..

M&L cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth complete all as specified and directed.

Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Dismantling water tank of exc 500 ltr and not exc 1000 ltr Capacity and removing from site complete all as specified and directed.

S&F in repair rotational moulded polyethylene1000 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float three layer external and internal white and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and ditected.

S & F in repair 15mm dia Brass CP central hole basin mixer with 450mm braided connection pipe (without pop-up) for mixing hot & cold water, complete all as specified and directed by Engineer-in-Charge.

S & F in repairs CP shower roses with CP Arms, 15mm bore, complete all as specified and directed by Engineer-in-Charge.

S&F in repair rotational moulded polyethylene1000 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float three layer external and internal white and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and ditected.

M & L cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed by Engineer-in-Charge.

S & F cutting salt-glazed stoneware drain pipe in position, including jointing socket end of new pipe to same with packed spun yarn and cement mortar l:l and pipe in position and blocking up end with cement concrete 1:2:4. type B-l for a depth of at least 30cm from the cut made complete all as specified and directed by Engineer-in-Charge.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out any type of soil complete all as specified and directed.

M&L for Cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L for PCC (1:4:8 ) type D-2 as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for200 mm bore pipe complete all as specified and directed.

S&F 200 mm Salt glazed stoneware drain pipes, grade IS mark complete all as specified and diirected

S & F roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel ,hollow sections or flat sections) including distance pieces, cleats etc Fe-290(Gde E 16 complete all as specified and directed .

S&F 10 mm thick plate (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachmenother connections complete all as specified and directed

Returning, filling in, soil including spreading, levelling, watering and well ramming in layers not exc 25 cm etc complete all as specified and directed .

Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting poin etc complete all as specified and directed .

M &L for RCC 1:2:4 B1 type 20 mm graded aggregate foundations, including rafts, footings, foundation beams; ; bases for columns,Plinth Beam etc.; basement slabs, under-reamed piles and mass complete all as specified and directed.

M & L for rough finished formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

S & F for rough finished formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)complete all as specified and directed.

Demolition of roofs slab, floors (other than ground floors), beams, chajjas and similar suspended work complete all as specified and directed.

M & L slabs RCC 1:2:4 supported on lintal beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

S & F forming embankments includingraising (or lowering) earth,watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5m high from base complete all as specified and directed.

M & L for injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etccomplete all as specified and directed.

S&F in repair aluminum alloy powder coated standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one nos wire gauged shutter sliding type, with aluminum sections as per Series-A(15mm) 3 track of Jindal section numbers for sliding windows, and glazed with tinted glass coloured glass 4mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long etc complete all as specified and directed. Shutter Top & bottom size : 37.50x15x1.60mm Shutter inner lock size 37.50x15x1.60 mm Shutter side (Handle) size 37.50x15x1.36 mm Chowkhat bottom size : 50.30x26x1.20mm Chowkhat top & sides size: 50.30x26x1.00mm .Make: (i) Anodised aluminum section complete all as specified and directed.

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S & F Pre-painted galvantume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to walls,fixed with self tapping screws as complete all as specified and directed.

M & L machine cut kota stone slab flooring 20-22 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M & L kota stone slab 20-22 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and leveled in layers n exc. 15 cm thick, watered and rolled/ rammed to a true surface complete all as specified and directed.

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.

M&L for factory made prepolished rubber moulded vibromatic Chequred cement concrete tiles 20cmx20cmx25 mm /30cmx30cmx22-25mm thick, set jointed and pointed in neat cement slurry with grey cement and colour pigment to match, over and including 15mm thick screed bedding layer in CM (1:6) complete all as specified and directed.

M & L for size of grid 605x605 mm providing & fixing false ceiling of Anodised aluminium snap grid frame work for false ceiling all as specified Non Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws fixed in ceiling flat or slopingcomplete at all heights as per direction of Engineer-in-Charge.

M & L for 3.0 to 3.5 mm thick rubber sheet with fabric backing or insert and plain coloured or marbled topping, matt or glossy, laid in floors with approved adhesive including stretching, cutting and fitting and sealed down complete all as specified and directed.

S&F in repair looking mirror mounted on decorative type PVC frame fixed to wooden plug with CP brackets screw fixed, complete all as specified and directed.

S&F 12 mm thick toughned glass with openable door with itching of approved design including all fittings such as Bottom patch 163x50x31mm , Top patch, over pannel patch, Big -L , Glass door centre type lock, four side connector, Small-L, three side connector, wall fix bracket, glass to glass 180 degree connector, glass to glass 90 degree connector, pivot for Floor door closer, Pivot for top, wall to glass 90 degree connetor, wall mounted over panel patch with pivot, "H" type handle 450 mm long complete all as specified and directed Note: All fittings should be stainless steel 304 grade and approved by Engr-in-charge. Make of glass: modiguard/saint goben or equivalent, make of fittings: hafele, hettich or equivalent

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer-in-Charge..

M&L Glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 and dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed and specified.

M & L acid resistant tiles 15mm thick vitreous ceramic, unglazed, set, jointed and pointed in chemical resistant mortar, resin type, in floors over and including 15mm thick screed bedding layer in CM (1:6) complete all as specified and directed.

M & L acid resistant wall tiles size (300x450/200x300)15mm thick vitreous ceramic, unglazed, set, jointed and pointed in chemical resistant mortar, resin type, over and including 15mm thick screed bedding layer in CM (1:4) complete all as specified and directed.

Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each

S & F White vitreous china laboratory sink size 600x450x200mm complete all as specified and directed.

Providing and Fixing factory made single extruded WPC (wood polymer Composite ) solid decorative type flush door shutter of size 30 mm thick comprising of virgin polymar of k value 58-60 (Suspension grade),Calcium carbonate and natural fibers (wood powder/rice husk/wheat husk0 and non toxic additivves ( maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/cum and screw withdrawal strength of 1800 N (face ) & 900 N ( Edge) Minimum compressive strength 50 N /mm2 Modulus of elasticity 850 N /mm2 and resistance to spread of flame3 of class A category with property of being termite/borer proof water/ moisture proof and fire retardant .WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both hinges of required size with necessary full body threaded star headed counter sunk S.S Screws all as per direction of engineeer-in-Charge. Note : stainless steel butt hinges and necessary S.S Screws shall be paid separately) complete all as specified and directed.

S&F magnetic catcher and striking plate including letting in and fixed complete all as specified and directed.

S&F Continuous (PIANO) hinges, mild steel, bright finish or electrogalvanised 30 mm width of flaps (when open) complete all as specified as directed.

Taking down carefully existing aluminium/copper point wiring on batten or in PVC conduit or in MS conduit with GI earth wire etc ( light, fan, socket, or power and switch, socket, regulator, holders, ceiling roses) complete and making good the disturbed surfaces of walls, Floors, ceilings etc to match with existing all as specified and directed.

M & L for point wiring complete with 3 runs (P + N+ Earth) of PVC insulated, unsheathed, FRLS, 1100 volt grade, size 1.5 sqmm, multi stranded, copper conductor single core in and including rigid PVC concealed Conduit not less than 19 mm dia, clip, complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including MS Box of thickness1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and earth wire connected to earth dolly complete all as specified, required for One light/fan point controlled by one switch , complete all as specified and directed.

All as per item No 74 here in before , but for One three pin 5 Amp socket on same board with other switches.

All as per item No 74 here in before, but for One three pin 5 Amp socket on independent board.

All as per item No 74 here in before, but with 4 Sqmm. (nominal area) wire/cable for one 3 Pin 15 amp socket on independent board

All as per item No 74 here in before, but , drawing through exisitng conduit (without socket, elbow, junction box, bell mouth, bend, reducer , pressed iron/steel suction box , 3 mm thick plastic laminated sheet) required for One light/fan point controlled by one switch , complete all as specified and directed.

All as per item No 78 but point wiring for one 5 pin 5 Amp socket outlet point on same board complete all as specified and directed.

All as per item No 78 but for one 5 pin 5 Amp socket outlet point on independent board complete all as specified and directed.

All as per item No 78 here in before but with 4 Sqmm copper conductor cables (multistranded) PVC insulated FRLS, unsheated cable for one 6 pin 15 Amp socket outlet point on independent board complete all as specified and directed.

S&F ceiling rose surface bakelite 3 terminals of size 65x25mm. complete .

S&F switch modular 6 Amps 230 Volts one way switch.

S&F switch modular 10 Amps , 2 way , 230 Volts switch.

S & F Fan Regulator electronic rotary,0-4 steps step type 100 Watt, 240 Volt 50 Hz hum free 2 module complete all as specified and directed.

S&F Socket 6 Amps AC 230 Volts 2/3 pin combined 2 modular type complete all as specified

S&F Socket 6A/16 Amps-2/3 pin AC 230 Volts modular type complete all as specified and as directed.

S&F Switch modular type AC 230 volts 16 Amps one way complete all as specified and as directed.

S & F Modular white cover plate with frame 2 module and metal flush box 2 module complete all as specified and as directed.

All as per item No 89 here in before but 3 module

All as per item No 89 here in before but 4 module

All as per item No 89 here in before but 6 module

All as per item No 89 here in before but 8 module

All as per item No 89 here in before but 12 module

M&L lamp holder PVC/polycarbonate type with LED lamp 9/10 watt complete all as specified & directed

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

S&F LED luminaire 600x600mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver 3 core flexible copper conductor complete., complete all as specrified & directed

S&F in replacement, tube light fitting 1x20/22 watts and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed.

S&F round/square shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with 3 core flexible copper conductor cable, complete all as specified and directed by Engineer-in-charge

S&F in repair flood light fittings. Energy saving environmental friendly, long life, exclusive innovative epoxy powder coated die-cast aluminium housing IP66 flood light with high power LED's as light sources, suitable for high lighting architectural features or retail spaces as 70 watt or higher size LED , Glass cover, fixed on pole duly fixed on angle iron bracket complete all as specified and directed.

S&F fans ceiling complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated PVC AC single Phase 230 V / 240V 50 Hz of size 300 mm sweep, complete with louvers, shutters and connecting up ceiling rose to connector block of fan including fabricating and fixing of Fan hooks from ceiling truss/angle iron, required length of down rods (Aas per site requirement) and necessary nuts and bolts complete all as specified and directed.

S&F Exhaust fans AC single phase 230/ 240 V of size 300 mm sweep,50 Hz with louver of size 300 mm sweep, complete with louvers, shutters and connecting up ceiling rose to connector block of fan including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block including taking down old metalic exhaust fan complete all as specified and directed.

S&F Air Circulator fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting. complete all as specified and directed.

S&F Water heater storage type, electric, capacity 25 litres AC single phase 230/ 240 V o and connecting up including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block complete all as specified and directed.

S&F in replacement sheet metal enclosures TPN 415 Volt 4 way with suitable rated bus bar for Single door IP-43DB's including taking down old one complete all as specified and directed .

S&F sheet metal enclosures 240 volt 8 way with suitable rated bus bar for Single door IP-43DB's complete all as specified and directed .

S&F MCB SP 240 volt 10 KA 5 to 40 Amp, conforming to relevant IS complete all as specified & directed.

S&F MCB SPN 240 Volt 10 KA 40 Amp conforming to IS complete all as specified

S&F MCB TPN 415 Volt 10 KA 63 Amp conforming to IS complete all as specified

S&F metal clad single pole and neutral enclosure with 2 pin and earth plug and socket complete with and including one single pole MCB 20 Amp 240Volt complete.

M&L for submain wiring with 3 runs(N+P+E) of 1.5 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLS cable 1100 volts grade drawn through and including concealed/surface PVC conduit pipe of medium duty not less than 15 mm dia including necessary PVC conduit specials and connecting with suitable size thimble, including taking old wiring complete all as specified and directed. Note:-3 runs of 1.5 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length.

All as per item No 111 but with 3 runs(N+P+E) of 2.5 Sqmm single core copper FRLS conductor . Note:-3 runs of 2.5 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length.

All as per item No 111 but with 3 runs(N+P+E) of 4 Sqmm single core copper FRLS conductor .Note:-3 runs of 4 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length.

All as per item No 111 but with 6 runs(3 runs P+N+ 2 run Earth) of 6 Sqmm single core copper FRLS conductor and PVC conduit not less than 24 mm dia. Note:-6 runs of 6 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length.

M&L Earthing complete with GI earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to GI earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of GI or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and as directed.

S&F TPN DB VTPN 4 way 415 Volts,50 Hz indoor type double door sheet metal enclosure IP-43 DB's flush mounted with 250 Amp Copper bus bar for each phase with two neutral bar & two earthbar and cable ties for cable management including mounting arrangement including DPX3 MCCB 250 Amps four pole 415 volts as incomer including connection terminal strip complete prewired with suitable size copper conductor.The DB's should hold type test certificate(CPRI) as per IEC 61439-3 complete all as specified and directed by Engr-in-charge.

Supply and Laying XLPE insulated galvanised steel strip or wire armoured elctric power cable with stranded aluminium conductor 1100 V grade of size 70 sqmm 3½ core after cutting to required length with necessary glands, nuts, bolts, and lugs complete all as specified and directed

All as per item No 117 but size 10 sq mm 4 core

Excavation in trenches soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out excavated soil/sand/unseviceable LT Cable for laying of cable and getting out.

Sand cushioning and covering of UG cable using crushed metal sand in trenches for cable protection all as specified and directed.

M&L for brick well burnt Class ‘B’ as cover to U/G cable laid dry flat over the cable with width equal to length of the cable and abutting each other with gap between adjacent slab not exceeding 10mm over under ground cable for cable protection in trenches all as specified and directed

Cutting existing road/hardstand of any type by using crow bar chisel uprto a depthof 30 cm for laying GI pipe including making good the surface by returning filling watering ramming in layers 150 mm thick PCC 1:2:4 over 200 mm thick hard core of broken bricks/stones over returning filling watering ramming in layers not exceeding 25 cm thick complete all as specified and directed

M&L for GI tubing medium grade (ISI marked) with all fitting/acessories for protection of cable on pole/wall and under road crossing including clamps, nut bolt etc all as specified and directed of size 50mm dia

S&F LED bollard type fitting (Garden light) 9/10 Watt cpacity 650 mm height, LED bollard AFlare fitted with low glare diffuser with IP 65 protection, complete with necessary 0.054 Sqm PCC foundation/ Light including taking down existing old pattern unserviceable light fitting all as specified and directed. (Sample should be collected from user)

S&F junction box made of glass fibre reinforced and transparent of size 126x228x111, KV PC 8104 with IP 65 protection including 5/15 Amp Switch socket comination 1 No and suitable size clamps fixing for pole/in pcc foundation etc. (Sample should be collected from user)

Supply,install, testing & commissioning hi wall mounted Split Air conditioner HOT & Cold Type Mode,with indoor/ outdoor complete with cordless remote control unit and with cooling and heating function of capacity 2 Ton (Room size 13 x 8 x 4 mtrs), including all fixing arrangements complete all as specified and directed. Note :- (i) Guaratee card + Purchased voucher to be submitted before RAR/Final Bill. (ii) Contractor should fully responsible for all the defect within Guarratee period offered by the manufaturer.

Supply and install Wall mounted Digital voltage Stablizer 5 KVA for split type 2 Ton AC 230 Volts 50 Hz, all as specified and directed.

M & L for point wiring complete with 3 runs (P + N+ Earth) of PVC insulated, unsheathed, FRLS, 1100 volt grade, size 1.5 sqmm, multi stranded, copper conductor single core in and including rigid PVC surface conduit not less than 19 mm dia, clip, complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including MS Box of thickness1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and earth wire connected to earth dolly complete all as specified, required for One light/fan point controlled by one switch , complete all as specified and directed.

All as per item No 128 but for one 5 pin 5 Amp socket outlet point on same board complete all as specified and directed.

All as per item No 128 but for one 5 pin 5 Amp socket outlet point on independent board complete all as specified and directed.

All as per item No 128 here in before but with 4 Sqmm copper conductor cables (multistranded) PVC insulated FRLS, for one 6 pin 15 Amp socket outlet point on independent board

S&F switch piano flush type single pole, 5 Amps, one way all as per specified & directed.

S&F switch piano flush type single pole, 15/20 Amps, one way all as per specified & directed.

S&F socket outlet 6 Amps, 5 pin, 2 in 1 complete all as specified and directed

S&F socket outlet multipurpose 5 and 15 Amps, 5 pin, 2 in 1 complete all as specified & directed

S&F step type, electronic fan regulator 120 watts, 5 step for ceiling fan 1200/1400 mm sweep 230 volts AC complete all as specified and directed

All as per item No 128 but point wiring drawing through Exisitng Conduit .

All as per item No 128 here in before , but wiring drawing through Exisitng Conduit for One three pin 5 Amp socket on same board with other switches.

All as per item No 128 here in before, but wiring drawing through Exisitng Conduit for One three pin 5 Amp socket on independent board.

All as per item No 128 here in before, but wiring drawing through Exisitng Conduit with 4 Sqmm. (nominal area) wire/cable for one 3 Pin 15 amp socket on independent board

S&F Wall light fittingDecorative, wall mounting, brushed nickel finish fixture with opal glass diffuser suitable with 9 W LED 2 n x 9 W LeD Lamp/2 n x 7.5 W LeD filament lamp

S&F wall fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting. complete all as specified and directed.

Taking down ceiling fan, exhaust fan and dismantling blades, removing fan and blades to store, removing capacitor carefully for overhauling checking serviceability of bearings/bush, winding etc cleaning the fan reassembling after replacing the unserviceable parts such as capacitor, rubber bush, split pins, nut & bolts complete (To be paid under relevant item of the Sch 'A'), and testing the same, hanging ceiling fan connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed by Engineer-in-Charge .

SUSHIL KUMAR

M/S VIJAY TRADERS

ACE BUILDERS AND CONTRACTORS

M/s Anil Kumar

Alankar Traders

Ms dev associates

IMPERIAL ENGINEERS

MOHAN LAL GUPTA