Construction of New Section Office Building, Meeting Hall, Service bridge at Saraswati Barrage, Matarwadi, Ta. Dist. Patan

It. Rate in Amount in

specification and reference to book of Quantity Unit

specifications)

1 Excavation in all sorts of soil (including wet 417.00 cu.m 79.00

and slushy condition of soil) with yellow,

sandy, gravelly soil including soft murrum &

H.M. including sorting & stacking and

depositing the excavated stuff in uniform

layers as and where directed upto lead of

m and lift as shown below including clearing

the site etc. compute (including dewatering).

(B) For foundation trenches of C.D. work (a)

0 to 3 Mt. depth

2 Providing and laying foundation concrete of 103.91 cu.m 3424.30

proportion as under by using cement, sand

and machine crushed course aggregate laid

in situ including necessary temping, smooth

finishing, watering and curing as directed

with all leads and lifts etc complete. (a) PCC

3 Providing and laying CC 1:2:4 grade using 28.00 cumt 4873.40

cement, sand & crushed metal incuding

providing & erecting necessary form work,

centering, vibrating, smooth finishing,

watering & curing as directed with all leads &

lifts etc. complete. (a) Sub structures

4 Providing burnt brick masonary 2nd class in 101.00 Cum. 4182.00

cement mortar in 1:5 proportion for

foundation & superstructure upto 6.00 mt.

height including striking out joints 20mm

deep curing watering finishing joints and

providing scaffolding as directed as comp.

5 Providing and laying CC 1:2:4 grade using 5.00 cumt 5053.10

cement, sand & crushed metal incuding

providing & erecting necessary form work,

centering, vibrating, smooth finishing,

watering & curing as directed with all leads &

lifts etc. complete. (b) Super strucutres

Description of Item (with brief

It. Rate in Amount in

specification and reference to book of Quantity Unit

specifications)

6 Providing and laying RCC 1:1.5:3 grade by 192.00 cmt. 5101.40

using cement, sand and crushed metal for

different items like copping work, pier cap,

abutment cap, Wearing coat, Skin concrete,

Solid slab upto 60 cm. thick, Barrel of canal

syphons, barrel of R.C.C. through, & beams

for foundation and super structure as per

approved design incl. providing necessary

centering, shuttering and form work,

vibrating, smooth finishing, watering and

curing as directed with all leads and lifts etc.

ramming consolidation including watering

with all lead and all lifts etc. complete. (b)

8 Providing and laying HYSD/TMT Fe-500 8.69 M.T. 71366.00

steel bar reinforcement for R.C.C. works and

anchor bars with providing binding wires

including cutting, bending, welding, binding

in position, hooking, placing in position with

all leads & lifts etc. complete. (c) TMT Fe-

9 Providing 10 mm. Thick cement plaster in 76.00 sqmt 169.22

single coat for plastering on ceiling and

soffits of stairs upto floor two level and

finished even and smooth in : (I) Cement

mortar 1:3 (1 cement : 3 sand) Ground Floor

10 Providing 20 mm thick double coat mala 175.00 Sqm 290.72

cement plaster on interior brick / concrete

work for plastering comprising of base coat

of 12 mm thick cement plaster in cement

mortar (1 Cement : 4 coarse sand) in rough

finishing and 8 mm thick top coat of cement

mortar 1:2 (1 Cement : 2 Coarse sand)

finished with trovel including scaffolding

curing etc. complete.

11 Providing 20 mm thick sand faced cement 158.00 sqmt 330.72

plaster on walls for all height above ground

level consisting of 12mm thick backing coat

of cement mortar 1:3 (1 cement : 3 sand)

and 8mm thick finishing coat of C.M. 1:1 (1

cement : 1 sand) including making

necessary cornices as directed etc.

Description of Item (with brief

It. Rate in Amount in

specification and reference to book of Quantity Unit

specifications)

12 Wall painting (Three coats) with plastic 251.00 sqmt 172.59

emulsion paint of approved brand and

manufacture on undecorated wall surface to

give an even shade including throughly

brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth & Applying two coat of birla

or asian acrylic lappy (putty) and two coat of

primer of approved brand and manufacture

on new wall surface to give an even shade

including thiroughly brushing the surface free

from mortar dropping and other foreign

matter and sand papered smooth.

13 Finishing wall with weather proof exterior 158.00 sqm 122.14

emulsion paint on wall surface (two coats) to

give an required shape even shade after

thoroughly brushing the surface to remove

all dirt, and remains of loose powdered

materials.etc complete

14 Providing and fixing window having extruded 25.00 Sqm 1591.87

aluminum Colour Powder Coated section

frame main outer size 95mm x 24mm x

1.17mm @ wt.of 0.738 Kg/mt, horizontal

Three track member size 92mm x 31.75mm

x 1.30mm @ Wt.1.07 Kg/mt, vertical

member of size 92mm x 31.75mm x 1.50mm

,@ Wt. 1.06 Kg/mt with sliding shutters of

horizontal member size 40 mmx18mm

x1.29mm @ wt.of 0.456 Kg/mt, vertical

member of size 40mm x 18mm x 1.29 mm

@ wt.of 0.456Kg/mt with 5 mm thick

transparent bronze colour tinted float glass

with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass

fixing to frame as per details etc (Including

Mosquito Net)

Description of Item (with brief

It. Rate in Amount in

specification and reference to book of Quantity Unit

specifications)

15 Providing and fixing 35mm thick factory 11.00 sqm 2152.31

made moulded door shuter consisting of

solid core single leaf flush door of 30mm

thickness, lipped with 15mm (5mm x 3) thick

x 30mm width on one stiles and top rail and

10mm (5mm x 2) thick x 30mm width on the

other stiles and bottom rails. The inner panel

laminated with 2mm thick termite proof,

water proof and fire resistant moulded PVC

sheet with 2,4,6 raised panel design in

different plain and /or prelim colours on one

side after routing the moulded design on

flush door and 2mm plain and/or prelim PVC

sheet on other side using rubber adhesive

on flush door and solvent cement adhesive

on the PVC liping etc. complete as per

direction of Engineer in charge,

manufacture’s specification and drawing.

16 Providing and laying white glazed tiles 6mm 13.00 Sqm 1127.48

thick in skrting risers of steps and dedo on

10mm thick cement plaster 1:3 (1-cement : 3-

coarse sand) and jointed with white cement

17 Providing and fixing standared extruded of 6.00 sqmt 1175.56

alluminium section of size 63mm x 38.10mm

x 1.2mm , @ Wt. 0.643 Kg/mt with colour

Powder Coated alluminium frame for

ventilation with 5 mm thick frosted glass as

details etc complete for Ventilation

18 Providing and fixing Safety M.S. grills of 292.00 kg 121.20

required pattern to windows & Compound

wall etc. with M.S. flats at required spacings

and frame alround, square or round bars

with round headed bolts and nuts or by

screws. including one coat of primer and two

coats of mattfinished oil painting etc

Description of Item (with brief

It. Rate in Amount in

specification and reference to book of Quantity Unit

specifications)

19 Providing and fixing 30mm thick FACTORY 2.60 sqm 2236.14

MADE SOLID BOTH SIDE PRELAM PANEL

PVC DOOR SHUTTER consisting of frame

made out of M.S. tubes of 19 gauge

thickness and size of 19mm x 19mm for

stiles, top and bottom rails. M.S. frame shall

have a coat of steel primer of approved

makde and manufactures. M.S frame

covered with 5mm thick heat moulded prelim

PVC ‘C’ channel of siz 30mm thickness,

mm width of which 50mm shall be flat and

20mm shall be tapered in 45 degree Angle

on either side forming stiles, and 5mm thick,

95mm wide pream PVC sheet out of which

75mm shall be flat and 20mm shall be

tapered in 45 degree on the inner side ot

form top and bottom rail and 115mm wide

prelim PVc sheet out of which 75nmm shall

be flat and 20mm shall be tapered on both

side to form lock rail, Top, bottom and lock

rails shall be provided either side of the

panel. 10mm (5mm x 2) thick 20mm wide

cross PVC sheet shall be provided as gap

insert for top rail and bottom rails. Panelling

of 5mm thck both side prelim PVC sheet to

be fitted in the M.S. frame welded,sealed to

the stiles and rails with 7mm (5mm + 2 mm)

20 Providing and laying Vitrified tiles 8 to 10 73.00 Sqm 1120.36

mm thick , 24'' x 24'' in flooring treads of

steps and landing laid on a bed of 12mm

thick cement mortar 1:3 (1-cement : 3-

coarse sand) finishing with flush pointing in

white cement.

21 (B) Providing sock pit of 5.00 Cu.M. Volume 1.00 Each 3252.21

including excavating and filling brickbats with

dry masonry work at top for 45cm. height

including covering the top with stone

including providing vatas in C.M. 1:3 with

finishing curing etc. complete as directed.

22 Providing and fixing pre-cast Rubber Dye / 390.00 Sqm 700.74

steel Dye inter locking concrete block 60mm

thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as

per approved design Confirming to IS

: 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in

proper line and level as per guidlines of IRC

: SP 63-2018 etc. Complete.

Description of Item (with brief

It. Rate in Amount in

specification and reference to book of Quantity Unit

specifications)

23 Providing laying and jointing in true line and 5.00 Rmt. 148.12

level 40mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings as approved

by Engineer In Charge. Pipe shall be fixed

on the wall with the help of clamp at every

two metre C/C or shall be concealed as

directed including necessary fittings etc.

including testing of pipe and joints and fixing

the same with adhesive solvent, including

cost of all materials.

24 Providing, laying and jointing in true line and 15.00 Rmt. 918.67

level 110 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end

plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999

of approved make for drainage system pipe

line, pipe shall be jointed with each other

with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 110 mm

diametre x 149 mm length x 145 mm heigh

at every 2000 mm center to center or shall

be concealed in walls as directed including

necessary fittings such as bends, shoes etc.

including testing of pipes and joints and

jointed with adhesive solvent cement

including cost of all materials.

25 Providing erecting and fixing double coated 1000.00 litre 3.95

ISI water tank of required capacity each with

all necessary fittings and connection etc.

complete on terrace

26 Providing laying and jointing in true line and 34.75 Rmt 119.15

level 32mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings as approved

by Engineer In Charge. Pipe shall be fixed

on the wall with the help of clamp at every

two metre C/C or shall be concealed as

directed including necessary fittings etc.

including testing of pipe and joints and fixing

the same with adhesive solvent, including

cost of all materials.

27 Providing and fixing 600 mm x 450 mm 1.00 Each 859.41

beveled edge mirror of superior glass

mounted on 6 mm thick A.C sheet or

plywood sheet or PVC framing and fixed to

wooden plugs with C.P. brass screw and

Description of Item (with brief

It. Rate in Amount in

specification and reference to book of Quantity Unit

specifications)

28 Providing and fixing S.W. gully trap with C.I. 3.00 Each 1246.92

grating brick masonry chamber and water

tight C.I. cover with frame of 300mm x

300mm size (inside) with standard weight.(i)

Square mouth traps.(B) 150mm x 100mm

size P or R type

29 Flat back wash basin Colour glazed 450 x 1.00 Nos 470.76

30 Providing and fixing bib cock C.P. Bib cock 4.00 Nos 400.58

15 mm Heavy duty with cap

31 Providing and fixing water closet European 1.00 No. 2891.63

Wall Hung Type with a pair of C.L.I or Mild

steel Brackets,complete with fittings &

providing & fixing two way bib cock,

Metropole flush valve,health fucel, etc. &

including C P Brass handle unions and

coplings for connections with inlet,outlet in

walls and making good the same connecting

the flush bend with cistern and closet

etc.complete including plastic seat cover

with all labour & materila required to fit water

closet as directed by engineer incharge (

white or Colour of Hindware, CERA, Bell or

equivalent brand.)

32 Providing and fixing Urinal or approved 1.00 Each 1074.86

quality including conecting the Urinal with

waste pipe , tap etc. complete.(A) White

earthenware flat back or corner type size

33 Providing and fixing PVC SWR Nahni trap IS 2.00 Each 601.94

14735 for drain - 75 mm diameter with jali of

the following nominal diameter of self

cleansing design with C.I scread down or

hinged grating including the cost of cutting

and making good the walls.

34 Providing and fixing C.P. brass towel rail 1.00 Each 616.42

comlete with C.P. brass brackets fixed to

wooden plugs with C.P. brass scews.(B)

600mm x 20mm size.

Description of Item (with brief

It. Rate in Amount in

specification and reference to book of Quantity Unit

specifications)

35 Point wiring for Light / Fan/ Bell/ Primary 20.00 pt. 472.68

Point with 2-1.5 sq. mm & earth wire of

sq. mm (green) both are of ISI marked

kv grade FRLS PVC insulated multi strand

copper wires upto max length of 10 mt, in

below type of pipe erected with 6A Tissino

Type ISI marked flush type switch / bell push

and accessories erected on Metal /

PVC/Wooden Box covered with 3 mm thick

PC(Polycarbonate) /Acrylic/Laminated sheet.

with necessary Lamp holder/ceiling rose /

H.D.Connector as directed. (b) with

swg(1.6 mm thick) HGS metal conduit pipe

and accessories painted black erected

flushed on wall/ceiling complete

36 providing and erecting Miniature circuit 6.00 Each 112.11

breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with

ISI Mark Cat.III

37 Providing and erecting Approved make 8.00 each 1596.81

Ceiling fan with double ball bearing ISI mark

with condenser A.C. 23OV.50 c/s.1200 mm.

sweep complete, canopy erected on existing

hook or clamp with earthing. [Make shall be

approved by Engineer in charge]

38 Providing and fixing C.I. Manhole cover 0.60 1.00 Each 958.17

M. x 0.45M. size having weight not less than

39 Supplying and erecting LED indoor fittings 9.00 Ea. 373.70

with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing

used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser

with company mark/name 160V to 270V,

Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

any wattage capacity between the ranges

shown.) (A) Tube Light with integral driver

(iv) 22-24 Watts, Surge - 2KV,IP-20,

conventional 4 feet Cat-lll

Description of Item (with brief

It. Rate in Amount in

specification and reference to book of Quantity Unit

specifications)

40 Providing and erecting approved make split 1.00 Ea. 59293.06

air-conditioning unit consisting of copper

condensing unit with fan motor, hermetically

sealed rotary compressor with accessories

etc. duly connected separately erected

evaporating unit and blower motor with its

accessories by means of extra supplied

proper insulated copper tubing,drain PVC

pipes suitable for ( cost includes powder

coated Stand, Eco Friendly green gas

charging, 15A plug top & Remote Control)

with necessary core cutting. (1)For ISEER

Range (KWH/KWH)(3.1 to 3.99) Premium

Category (c) for 1.7 to 2.0 ton capacity Note :-

Premium category:O-General, Mitsubishi

41 Providing & erecting open well horizontal 1.00 Ea. 10734.28

mono block pump set with cast iron body,

complete for three phase submersible motor

having [B] For 2 HP 3 phase open well

horizontal mono block pump set suitable for

200 LPM @ 25 mtr head suitable for 50 mm

dia delivery pipe Cat.II

42 Supplying & erecting approved make low 1.00 Ea. 1703.87

noise decorative exhaust fan having square

frame ABS body with inbuilt lowers & square

frame. 200mm with 1350RPM Cat.II

43 Providing and laying geo fabric filter (GWF- 288.00 Smt. 109.88

50- 300 catogary) over the excavated

surface as per specification including

stiching with overlap to design profile as

directed in tidal range etc. complete.

44 Supplying and laying mechanically woven 64.00 No. 7817.00

double twisated Hexagonal Zn+ PVC coated

box wire mesh gabions Size 3mx1mx1m

filled with 15 to 40 kg. trap rubble stone

(approximate 4.50) tone with mesh size

10x12 cm including packing, interlocking of

stones & fusing top of gabion & tying to each

other & laying to the required line, level slope

with all leads & all lifts as directed etc.

Description of Item (with brief

It. Rate in Amount in

specification and reference to book of Quantity Unit

specifications)

45 Supplying and laying mechanically woven 64.00 No. 5139.00

double twisated Hexagonal Zn+ PVC coated

box wire mesh gabions Size 2mx1mx1m

filled with 15 to 40 kg. trap rubble stone

(approximate 3.0) tone with mesh size 10x12

cm including packing, interlocking of stones

& fusing top of gabion & tying to each other

& laying to the required line, level slope with

all leads & all lifts as directed etc. comp.)

46 Supplying and laying flexible gabions of size 64.00 No. 2558.00

1mx1mx1m (mesh size 100 mm x 100 mm )

of rope 9mm dia P.P. materials filled with

to 40 kg trap rubble stone (approximate

weight 1.5 tonne)as per drawing including

packing, inter locking of stones and stiching,

fusing top of gabione and tying to each other

and laying to the required line, level, slope

with all lead and lifts as directed etc.

Total Amount Rs.

Total Amount Rs.

Executive Engineer

Deesa Irrigation Division