Supply of Godraj make office furniture for the use of Bidhannagar East Sub Division No III under Bidhannagar East Division during the year 2017 2018

Amount

Impress Table Supply and placement of ISO 9001:2008, Supply and placement of ISO 9001:2015,BIFMA,OHSAS 18000,ISO 14001,Greenguard certified manufacturer's Main Desk MOC MDF + VENEER + PU Coating, Size :1800 W * 900 D * 750 HTOP THICKNESS –Modesty Panel dimension 65 mm Size : 1640 X 600 X16 MM , MDF+ Veneer + PU Coating.Mobile Pedestal MDF + Veneer + PU Coating , Size : 510W * 635H * 445D mm.

Impress Back Unit Supply and placement of ISO 9001:2015,BIFMA,OHSAS 18000,ISO 14001,Greenguard certified manufacturer's Impress Back Unit, MDF + VENEER + PU Coating & Glass Doors, Size : 2215 W * 410D * 2000 H GLASS THICKNESS – 5 mm

Sedna High Back Supply and placement of ISO 9001:2008,BIFMA,OHSAS 18000,ISO 14001,Greenguard certified Godrej/Equivalent Make High Back Chair.Head rest: (W)26.0cm x 12.0cm(L) Back: (W) 46.0 cm x (H)57.0 Cm, Seat : (W)49.0 cm x (D) 49.5 cm Overall Dimensions of Chair Seat Height - min 41.0 to max 51.0 cm. Height - min 113.5 to max 138.0 cm. Width & Depth of Chair as measured from pedestal - Width-75.0 cm and Depth-75.0 cm.The seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed moulded reconstituted wood & upholstered with leather and moulded polyurethane foam. Size of back shall be (W)-46.0cm, (H)-57.0cm & size of seat shall be (W)-49.0cm x (D)-49.5cm. High Resilience (HR) foam should be used in making seat & back which shall be moulded with density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per IS: 7888 for 25% compression. The back rest should be connected to the mechanism with a drop-lift mechanism which can be adjusted in the range of 7.0+/-0.5cm for the comfortable back support to suitable individual need. Armrests should be pressure die casted in polished aluminium with PP arm tops. The mechanism of chair shall have following features:360 degree revolving type, Seat/Back tilt ratio of 1:3, Synchronized tilt, Back tilt with 4 position locking and Side tilt tension adjustment knob should be operated while taking back support for better adjustment of comfort. The chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm. The pedestal shall be made of die-cast polished aluminium. it shall be fitted with 5 nos twin wheel castor. The size of head rest shall be (W)26.0cm x 12.0cm(L). The size of the pedestal shall be 65.0 +/- 0.5 cm pitch-centre-dia (75.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black polypropylene. Overall dimensions of Chair shall be, Width of Chair - 75.0cm, Depth of Chair - 75.0 cm as measured from pedestal below. Height from ground - min 113.5 to max 138.0 cms. Seat height - min 41.0cm to max 51.0 cm. Dimensions tolerance / variations shall be within +/- 1 cm. Bidders must have Greengurd certificate and green assurance certificate for few of its product for environment friendly practice

Beat Visitor Supply & placement of Visitor chair from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA ,Greenguard Certified Manufacturers and as per approved drawing & design / specification.1. SEAT/BACK ASSEMBLY: The seat & back is made up of 1.2 ± 0.1cm thk. hot pressed plywood measured upholstered with knitted fabric , over moulded High Resilience Polyurethane foam. * MID BACK SIZE: 51.6 cm. (W) x 65.7 cm. (H)* SEAT SIZE : 49.0 cm. (W) x 51.4 cm. (D) 2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 55+/-2 kg/m³ and hardness 16 ± 2 kgf as per IS:7888 for 25% compression.3. TUBULAR VISITOR FRAME (Visitor Chair): The tubular frame is powder coated ( DFT 40-60 microns ) cantilever structure & made of Dia.Ø 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. Tube with a connecting M.S. Spine welded to it. Back spine is fitted to the frame assembly.

Mayfair Main Desk+ERU+PED Main Desk dimension: 1200W x 600D x 750H (All dimensions in mm Please note All dimensions can vary by +/­ 5mm. )The table top is in white cedar, side panels are in black, while the modesty panel is a combination of black & white cedar. Tops / Worksurfaces : (White Cedar) Made from 18mm thick PLB with PVC lipping. Side Panels : (Black) Made form 18mm thick PLT with PVC lipping. Modesty Panel : Made form 18mm thick PLT with PVC lipping. Bigger upper panel in Black and smaller lower panel in white Cedar.

Bravo Mid Back Dimension 76.3 cm. (W), 76.3 cm. (D), 85.5-97.5 cm (H) , 42.5-54.5 cm. (SH). Greenguard certified 100% VOC free powder coating, Knock-down design reducing transportation emissions, Designed for long life and easy part replacement 99% recyclable. The seat and back are made up of 1.2 plus / minus 0.1 thick hot -pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. The HR polyurethane foam is moulded with density = 45 plus/minus 2 kg/m3 and hardness load 16+_ 2kgf as per IS:7888 for 25% compression. The one -piece armrests are injection moulded from black Co-polymer Polypropylene. The mechanism is designed with the 360o revolving type, Upright position locking, Tilt tension adjustment, Seat/back tilting ratio of 1:3. The pneumatic height adjestment has an adjestment stroke of12.0 plus/minus0.3cm. The bellow is 3 piece telescopic type and injection moulded in black polypropylene. The padestal is injection moulded in black 33% glass-filled nylon-66 and fitted with 5 nos twin wheel castors. The pedestal is 66.3 plus/ minus 0.5cm.pitch -center dia.(76.3 + 1.0cm with castors. The twin wheel castors are injection moulded in black nylon.The manufacturer should be having certifications like; BIFMA, ISO 9001:2008, ISO 14001:2004, ISO 18001:2007 and should have Green Guard Certification for few of its products,

Bravo Visitor Dimension 61.4 cm. (W), 64.5 cm. (D), 89.5 cm (H) , 46.5 cm. (SH) .Greenguard certified 100% VOC free powder coating, Knock-down design reducing transportation emissions, Designed for long life and easy part replacement 99% recyclable. The seat and back are made up of 1.2 plus / minus 0.1 thick hot -pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. The HR polyurethane foam is moulded with density = 45 plus/minus 2 kg/m3 and hardness load 16+_ 2kgf as per IS:7888 for 25% compression. The one -piece armrests are injection moulded from black Co-polymer Polypropylene. The powder coated (DFT 40-60 microns )tubular frame is cantilever type & made of 2.54 plus /minus 0.03cm. X 0.2 plus /minus 0.016cm. Thk. M.S.ER.W.Tube The manufacturer should be having certifications like; BIFMA, ISO 9001:2008, ISO 14001:2004, ISO 18001:2007 and should have Green Guard Certification for few of its products,

Mayfair Main Desk+ERU+PED Main Desk dimension: 1200W x 600D x 750H(All dimensions in mm Please note All dimensions can vary by +/­ 5mm. ) The table top is in white cedar, side panels are in black, while the modesty panel is a combination of black & white cedar. Tops / Worksurfaces : (White Cedar) Made from 18mm thick PLB with PVC lipping. Side Panels : (Black) Made form 18mm thick PLT with PVC lipping. Modesty Panel : Made form 18mm thick PLT with PVC lipping. Bigger upper panel in Black and smaller lower panel in white Cedar.

Dimension 76.3 cm. (W), 76.3 cm. (D), 85.5-97.5 cm (H) , 42.5-54.5 cm. (SH). Greenguard certified 100% VOC free powder coating, Knock-down design reducing transportation emissions, Designed for long life and easy part replacement 99% recyclable. The seat and back are made up of 1.2 plus / minus 0.1 thick hot -pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. The HR polyurethane foam is moulded with density = 45 plus/minus 2 kg/m3 and hardness load 16+_ 2kgf as per IS:7888 for 25% compression. The one -piece armrests are injection moulded from black Co-polymer Polypropylene. The mechanism is designed with the 360o revolving type, Upright position locking, Tilt tension adjustment, Seat/back tilting ratio of 1:3. The pneumatic height adjestment has an adjestment stroke of12.0 plus/minus0.3cm. The bellow is 3 piece telescopic type and injection moulded in black polypropylene. The padestal is injection moulded in black 33% glass-filled nylon-66 and fitted with 5 nos twin wheel castors. The pedestal is 66.3 plus/ minus 0.5cm.pitch -center dia.(76.3 + 1.0cm with castors. The twin wheel castors are injection moulded in black nylon.The manufacturer should be having certifications like; BIFMA, ISO 9001:2008, ISO 14001:2004, ISO 18001:2007 and should have Green Guard Certification for few of its products,

JYOTI COMMERCIAL CORPORATION

WELL DECOR