SPECIAL REPAIRS P-436 AND SPL REP TO INT ELCT OF P-49 AT MIL STN JAMNAGAR

Amount

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar .

M&L 20mm thick Granite(of any type) work (table rubbed and polished) in cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment with hole for gas pipe line all as sppecified and directed

M&L 15-20mm thick Granite(of any type) work (table rubbed and polished) in window cills set in cement mortar (1:4) including pointing using marble dust with admixture of pigment to match with shade of granite including 20 mm thick screed bed in CM 1:4 all as specified

M&L 20 to 25 mm thick Kota stone slab as in flooring laid over and including 15mm thick screed bed in cement mortar (1:6), set & jointed in grey cement slurry mixed with pigment to match shade of slab, including rubbing grinding and mirror polishing, complete all as specified and directed.

M&L 18 to 22 mm thick kota stone slab as in skirting, riser of steps and pillars over and including 10mm thick rendering in cement mortar (1:3) including rubbing grinding and mirror polishing,complete all as specified and directed.

S&F Non-skid ceramic tiles 7 to 8mm thick (square / rectangular ) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thck screed bed in CM 1:6

M & L for Glazed ceramic tiles, coloured (light colour as approved), of size 300x 600 OR 350x 250x 7mm/ 450X 350X 7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 15mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

Demolition of reinforced Concrete in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspendedwork complete all as specified and as directed.

M&L Reinforced cement concrete (nominal mix) type B1 1:2:4 in chajjas, complete all as specified and as directed.

M&L Formwork to chullah hoods, chajjas, troughs and similar items including edges on flat surface complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified

Taking down Shutters of any description n exc 1 sq. m each and removing to store, complete all as specified and as directed.

Taking down Doors chowkat or frame n exc 1.5 Sqm but with shutters (without taking off shutters from the frames) , complete all as specified and as directed.

Taking down Doors chowkat or frame exc 1.5 Sqm but not exc 4 sqm but with shutters (without taking off shutters from the frames) , complete all as specified and as directed.

S&F 35 MM factory made IInd class HW Thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and as directed.

taking down down door shutters exc 1 Sqm but not exc 2 sqm and refixing at same opening after changing the frame all as specified and directed.

Taking down steel/wooden ventilators chowkat or frames exc 1.5 Sqm but n exc 4 Sqm each. but with shutters (without taking off shutters from the frames) , complete all as specified and as directed.

Taking down steel/wooden ventilators chowkat or frames n.exc 1.5 Sqm each. but with shutters (without taking off shutters from the frames) , complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F Pressed steel frames for doors size 125 mm X60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. , complete all as specified and as directed.

S&F Pressed steel frames for doors size 105 mm X60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc , complete all as specified and as directed.

M&L PCC type B0, 1:2:4 (12.5 mm graded aggregate) filling in door and frames, any size, single or double rebated, including arrangements all as specified and directed by engr in charge , complete all as specified and as directed.

M&L applying one coat of black bituminous paint on Surfaces of any description wood,steel, iron, concrete, brick, stone, etc., exceeding 10cm in width or girth , complete all as specified and as directed.

S&F factory made 35mm thick 2nd class hard wood glzed & skeleton door shutters,open rebated and prepared to recive gauge etc(without sash bars) edgs of framing plain, chamfered or etc,size of members of shutters as specified in SSR Pt-I, Sec-8 Clause 8.20 (a) without sash bar etc complete all as specified and as directed.

S&F in repairs 25mm thick prelaminated particle board (interior grade) as in cupboard shutter, sheleves etc one side with decorative choice lamination and other side balancing white lamination with 6mm thick Ist clas teak wood leaping fixed with screw to timber frame work complete all as specified and as directed.

S&F 100 mm long Hasp and staple, safety type, aluminium annodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

M&L preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

M&L preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L preparation of new untreated Steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome complete all as specified and directed.

M&L preparation of old treated Steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L Powder coated aluminium sliding window shutters, aluminium section including necessary joining cleats, glazing clips, Aluminium grill (decogrill Design no 20) and F/h type frame, rubber neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No.) or hinges type B-21 100 mm long (2 nos.), suitable handle or Star lock, (1 no.) gasket,Aluminium wire cloth 0.45mm dia of f wire and average width of aperture 1.40mm incl necessary channel frame work and 5mm thick float glass including fixing arrangement and clips complete all as specified and as shown on drawing NOTE : (ii) Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, etc.

S&F powder coated anodised Aluminium ventilator with fixed aluminium frame of size 60mmx40mmx1.98mm fixed in vertical position with aluminium vertical members and half portion to be provided with aluminum heavy duty adjustable loovers and 4mm thick pinhead glass and remaining portion to be louvered using 4mm thick pinhead glass and louvered portion covered with Aluminium wire cloth 0.45mm dia of f wire and average width of aperture 1.40mm incl Aluminium grill (decogrill Design no 20) and F/h type frame, rubber neoprene packing, anodised aluminium snap beading, screws, complete all as specified and as shown on drawing Note : Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading grill loovers etc

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staples or with second class hard wood beadings. , complete all as specified and as directed.

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed 200 mm long fixed in repairs , complete all as specified and as directed.

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed 200 mm long, complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 250 mm long , complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 250 mm long fixed in repairs, complete all as specified and as directed.

S&F in Aluminium handles, cast type, anodised 150mm long , fixed in repairs complete all as specified and as directed.

S&F in Aluminium handles, cast type, anodised 150mm long , complete all as specified and as directed.

S & F 100mm butt hinges, medium weight, stainless steel complete all as specified and directed.

S & F 75 mm butt hinges, medium weight, stainless steel fixed in MS frame or welded with MS angle frame , complete all as specified and as directed.

S&F Tubular towel rail, brass CP 20mm dia, D type, 60cm long between flanges in repairs , complete all as specified and as directed.

S&F SS Curtain Rod Decorative pattern as approved by Engr-in-Charge. In repairs , complete all as specified and as directed.

S&F SS Curtain Rod Bracket decorative type all as directed and approved by Engr-in-Charge , complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store of 15 mm dia , complete all as specified and as directed.

Taking down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store , complete all as specified and as directed.

S&F 16mm (outer dia) CPVC pipes, UV stabilised, SDR 11 pressure bearing capacity 28.12 kg/sq.cm @ 23 C ,leak proof, tough, rigid and suitable, fixed to walls with clamps / ceiling / concealed in wall including cutting chases and making good, or laid in trenches / jointed with sealant solvent leak proof including all fittings elbow, Tee, Socket, Reducer, Bushing, Step over head bends, End cap, End pugs, union, tank nipple and special fittings (brass insert threaded) like male, female treads, adapters, brass tee & reducers, male brass threaded adaptor, female brass threaded adaptor, flange including making Suitable size of brass threaded terminal to match the CP/PTMT plumbing fittings and interconnections as required for internal and external water supply applications complete all as specified and as directed.

S&F 20mm (outer dia) CPVC pipes, UV stabilised, SDR 11 pressure bearing capacity 28.12 kg/sq.cm @ 23 C ,leak proof, tough, rigid and suitable, fixed to walls with clamps / ceiling / concealed in wall including cutting chases and making good, or laid in trenches / jointed with sealant solvent leak proof including all fittings elbow, Tee, Socket, Reducer, Bushing, Step over head bends, End cap, End pugs, union, tank nipple and special fittings (brass insert threaded) like male, female treads, adapters, brass tee & reducers, male brass threaded adaptor, female brass threaded adaptor, flange including making Suitable size of brass threaded terminal to match the CP/PTMT plumbing fittings and interconnections as required for internal and external water supply applications complete all as specified and as directed.

S&F 25 mm bore Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed , complete all as specified and as directed.

Demolition of cement (un-reinforced) in any position not otherwise specifically provided complete all as specified and as directed (sunken) , complete all as specified and as directed.

M&L 30 mm thick PCC type B-0, 1:2:4 (12.5mm graded aggregate) on the base of sunken portion , complete all as specified and as directed.

M&L Cleaning vertical and horizontal surfaces of sunken slab using wire brushing followed by sanding with emery paper for loose materials/dust and applying two coats of epoxy resin component (Dr. Fixit DAMPGUARD or equivalent) solution/mix using nylon brush pouring Base part in appropriate container followed by the Hardner part and mix thoroughly to attain homogeneous smooth paste and dilute the mixed compound with water in ratio 1 part Base: 1 part Hardner: 1 part water by slow addition and mix thoroughly until a brushable consistency is obtained, first coat will be allowed to dry for 6 to 8 hrs before application of second/final coat) incl curing treated surface for 24 hrs complete incl applying evenly a coat of blown bitumen @ 1.5kg/sqm over entire treated surfaces incl spout holesbefore filling lean concrete including preparing existing surface and applying apoxy reisin and hot blown bitumen measured complete and all as specified and as directed as per manufacturer instruction. Note lean concrete measured and paid seprately

M&L 15mm thick rendering in cement plaster 1:3 with WPC on walls of sunken floor incl finished even and smooth w/o using extra cement at side walls , complete all as specified and as directed.

M&L filling PCC type E-2 1:5:10 (40 mm graded stone aggr) as in sunken floor after applying appropriate treatment to side walls , complete all as specified and as directed.

M&L 75 mm thick Cement concrete type C-2, 1:3:6 (40 mm graded aggregate) as in plinth protection , complete all as specified and as directed.

Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade A , complete all as specified and as directed.

Taking down cement plaster on brick/stone or concrete surfaces including racking out joints, hacking for key,scrubbing down with water to receive plaster , complete all as specified and as directed.

M&L for 10 mm thick rendering in CM 1:6 on fair faces of brick surfaces complete all as directed by Engr-In-Charge..

M&L 15 mm thick rendering in in two layers 5mm thick in CM 1:4,over 10mm thick cement plaster in CM 1:6 on fair face of brick work/Stone or concrete surface to be finished even and smooth without using extra cemen Including WPC compound 3% by weight of cement.(Note :a) integral WPC Compound shall be used in sencond layer,b) Intergial WPC shall be paid seperately on supply only..

M&L for rendering 5 mm thick in CM 1:3 on ceiling to be finished complete all as directed by Engr-In-Charge

M & L for applying 3mm thick wall care putty on Internal wall all as directed and specified.(Make : Birla wall care putty/JK wall care putty/ Berger Wall care putty)

M&L for preparation of New plastered surfaces by washing, rubbing down and stopping of distempered surfaces and applying two coat of oil emulation distemper on wall etc complete all as specified and directed.

Material and labour for preparation of plastered or unplastered surfaces of walls any width or girth application of coat of exterior wall care putty and a coat of primer complete all as specified and as directed by the Engr-in-Charge plastered or unplastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed by the Engr-in-Charge

Preparation of new ceiling surface and applying 2 coat of white wash .

M&L Complete Removal of existing treatment on wall Preparation of newly plastered surfaces of wall making surface smooth by application of 3mm thick wall care putty and applying two coat of oil bound distemper with roller finish complete all specified and directed.

Material and labour for preparation of old plastered or unplastered surfaces of walls Scraping old surface finish and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and as directed by the Engr-in-Charge

Complete Removal of existing treatment on ceiling and applying two coats of white wash after preperation old decorated surface complete.all as directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc 250 Ltr and up to 500 Ltr. Note:-Tank will be disconnect and refix carefully any damange to the tank will be bourn by the contractor

Taking down and refixing at same place Vitreous china wash basin, after repair work, white flat back , size 550 x400mm including refixing taps, waste, chain and plug and porcelain stopper brackets and restoring connection

S&F in repairs PVC(SWR) pipe 110 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, laid in trenches or in floors. , complete all as specified and as directed.

S&F in repairs PVC(SWR) pipe 75 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, laid in trenches or in floors , complete all as specified and as directed.

S&F 110mm PVC (SWR) single T equal or unequal , complete all as specified and as directed.

S&F in repairs PVC(SWR) bend any radius, 110 mm dia , complete all as specified and as directed.

S&F in repairs PVC(SWR) bend any radius, 75 mm dia , complete all as specified and as directed.

S&F in repairs PVC(SWR) Tee any radius, 75 mm dia , complete all as specified and as directed.

S&F in repairs 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent , complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) vent cowl , complete all as specified and as directed.

S&F Fancy type bib taps, chromium plated cast copper alloy 15mm bore with crutch screwed down fixed in repair / replacement complete all as specified and directed. Make: Jaquar Model No. CON-107KN ,or techno commercial eq model of make specified.

S&F Pillar Taps 15mm Bore, Cast Copper Alloy with Capstan Heads, Chromium Plated, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed Shanks and Fly-Nuts, screwed for Iron Pipe and fixed-in-repairs, complete all as specified and as directed. Make: Jaquar Model No.SHFLR5011N or equivalent model of make specified in Appx 'B' herein before

S&F Angular stop valve brass 15mm bore, Capstan head chromium plated, with wall flange, fancy type screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe, fixed in repairs complete all as specified and directed. Make: Jaquar Model No. CQT-23059 or equivalent model of make specified in Appx 'B' herein before.

S&F CP Soap dish of size 160 x 160 x 90mm or over fixed to plugs with chromium plated brass screws, fixed in repairs, complete all as specified and as directed.

S & F vitreous china squatting Pan “ Orissa” Pattern , of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete as fixed in repairs , complete all as specified and as directed.

S&F in repairs Waste fittings,32mm brass , chromium plated for glazed ware sinks , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed fixed in repairs , complete all as specified and as directed.

S&F PVC connections 15 mm size with PTMT nuts of length 600mm fixed in repairs , complete all as specified and as directed.

S&F 15 mm bore Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union , fixed in repairs , complete all as specified and as directed.

S&F PVC valveless syphonic action type ,flushing cistern Low level white,with,with inlet ball valve ,float and handle 10 Ltr capacity including brackets.fixed in repairs , complete all as specified and as directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 36" x 18" bowl size 16" x 14" x8" complete all as specified and as directed. Make Bluestar model no BSS BSD 53. or eq model of make specified

S&F Mild steel TMT bars Fe-500 D 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S&F Mild steel TMT bars Fe-500 D 8mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia. , complete all as specified and as directed.

S&F Welded steel wire fabric of weight exc 3.5 kg/Sqm and N. exc 4 kg/ Sqm, fixed to steel members with spikes complete all as specified nad directed

Removal of all loose/unsound/bad/damaged concrete or plaster existing RCC structure of slab/beams/walls by using chesel/hammar .Cut and remove unsound reinforcement bars, wires etc without damaging the sound reinforcement but , clean loose rust from bars manually with brush . fixing mild steel welded fabric of weight exceeding 3.5 kg but n Exc 4kg /Sqm with existing bars or by welding on it after cutting the RCC to the sound bar if the existing bar is damaged (supplymentary bars wiil be measured and paid separately under above item). Applying eppoxy bonding agent and making good with polymer modified plaster and micro concrete as required thickness over a coat of rust removing alkaline primer and match the finishing to the existing surface in ground floor as folowing given below :- . Modified plaster 10 mm to 20 mm thick

M&L for guniting/shotcrete using shrinkage controlled, polymer modified fiber reinforcement cementitious mortar ( Fosroc rendroc SP-40 or equivalent) using guniting / shotcrete pumps and allied equipment as required including taking out all loose material from repairable surface cleaning and exposing reinforcement etc where required and applying a coat of epoxy bonding agent to existing concrete surface and rust proof primer to reinforcement t before shotcrete/ guniting. (Thickness not exc. 20 mm.) complete all as repair and as directed

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in repair

Taking down all existing roof treatment and demolition of cement concrete padding/levelling course incl wire brushing and cleaning loose dust etc from surfaces of RCC roof incl flashing and juntion of parapet complete all as specified.

M & L for water proofing treatment to non-accessible roof slabs by applying one coat of bituminous primer conforming to IS-3384 @ 0.30 litre/sqm and laying Atactic Polypropylene (APP) modified membrance , reinforced with non woven ployester, of 3.50 Kg/sqm (minimum, 3mm thick (minimum), with minimum 75 mm side overlaps and 100mm end overlaps and applying one coat of bituminous aluminium paint over APP membrane all as specified and directed by Engineer-in-Charge.

Supply of integral water proofing compound

M&L Pre cast cement concrete block type C-1 1:3:6 Using 20 mm graded stone aggregate exc 10 CM in width and setting in CM 1;6 complete all as specified.

Supply and fix 14" transparent triangle unbreakable ABS corner shelf, 14 " long and 5 mm thick fixed in repairs complete all as directed by the Engr-in-Charge.

S& F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

Excavation in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil, complete all as specified

Demolition and breaking up drain pipe 100 mm dia ( salt glazed ware AC or reinforced concrete) set in Cement mortar

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified

M & L for reinforced concrete pipes, class NP2, 100 mm dia, laid and jointed complete with collars in trenches and jointed as specified complete all as specified and as directed by the Engineer-in-Charge

M & L for concrete bed to drain pipes of 100 mm bore, including packing under, and haunching against the sides of pipes after they are laid and tested cement concrete 1:4:8 type D-2 complete all as specified and as directed by the Engineer-in-Charge

M&L for providing precast cement concrete 1:2:4 type B-1 (using 20/15 mm graded stone aggregates) in precast manhole covers

M&L Dubbing out average 10mm thick on irregular face of walls (when specifically ordered in writing) in CM 1:4 all as specified and directed.

M&L Cutting holes into or through stone masonary built in cement mortor/ cement lime mortor and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required not exc 150 Sqcm each.

S&F 20 mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs

S & F Stainless steel Kitchen plate racks 1mm thick over all size 31" x36 x10" fixed in repairs Make : Prayag cat No P-346 or Tech commercial eq model of make specifid

M&L 25 mm Thick PCC 1:2:4 type B1 as in padding course over roof for leveling before application of roof treatment Coimplete all as specified And as directed

Taking down carefully aluminum /copper point wiring (light, fan, switch & power) complete including fittings such as switches, ceiling rose, pendent, by unscrewing from board ,out let box, fitting and fixture such as bulk head fitting, sketch fittings and making good the disturbed rurfaces of walls floors etc complete all as specified and directed by Engr-in-Charge.

Taking down old MCB, DBs/main switch of any size complete all as specified and directed by Engr-in-Charge.

Taking down sub main wire of any size fixed in any position , complete all as specified and directed by Engr-in-Charge.

M&L for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross sectional area, single core, pvc insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No in and including medium grade, PVC concealed conduit of dia not less than 20mm and conduit accessories, cutting chasing/concealed in wall, ISI marked with valid CML No (IS-9537-1983 for conduits and IS: 3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes (with earth dolly) duly painted with two coats of anticorrosive paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3mm thick Hylam sheet cover for fixing of switches, sockets etc including PVC insulated multi stranded copper conductor 1.5 sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the following :

One light/Fan point controlled by one way switch.

One light point controlled by two - 2 way switches for stair case.

One Bell point controlled by one switch bell push.

One 5 Amps socket on same board with other switches.

One 5 Amps switch socket combination on independent board.

All as per item No-117 here in above but 2.5 Sqmm stranded copper conductor and independent board for 15 Amps switch/ socket point complete all as specified and directed.

S&F switch piano flush type single pole one way 5 Amps 230 V.

S&F switch piano flush type single pole two way 5 Amps 230 V.

S&F switch socket out let 3 pin 5 Amps flush type 230 Volts multipurpose.

All as per item No-121 above but 5 Amps and 15 Amps multipurpose ( 3 Pin 15 Amps and one pin 5 Amps controlled by one switch.).

S&F socket out let 3 pin, 5 Amps, 230 Volt multipurpose flush piano type.

S&F fan regulator Electronic Step type (min 5 steps) 2 module, 120W complete all as specified and directed.

S & F switch Bell Push botton type 5 Amps single pole one way.

S&F Bell Ding Dong AC 230 volts type single pole complete all as specified and directed.

S&F ceiling rose surface backelet ISI marked 2 to 3 terminal complete all as specified and directed.

Supply & Fixing LED Batten fitting 5 Watt, burning hrs- 50,000 hrs, not less than 2000 lumen, cool white colour, temperature 6500K, CRI-80, THD-<20%, power factor->0.90, IP Rating-20, aluminium housing, operating voltage 150-270V AC and round block etc, incl PVC gutties and flexible wire and connecting to ceiling rose complete all as specified and directed by Engr-in-Charge. Model No D530565 of wipro or techno commercial eq model of Make specified.

Supply & Fixing LED Batten fitting 10 Watt, burning hrs- 50,000 hrs, not less than 1000 lumen, cool white colour, temperature 6500K, CRI-80, THD-<20%, power factor->0.90, IP Rating-20, aluminium housing, operating voltage 150-270V AC and round block etc, incl PVC gutties and flexible wire and connecting to ceiling rose complete all as specified and directed by Engr-in-Charge. Model No D531065 of Wipro or techno commercial eq model of Make specified.

Supply & Fixing LED Batten fitting 20 Watt, LED Life with L70 critaria 50,000 Hrs, 2000 lumen, cool white colour, temperature 6500k, CRI-80, THD-<20%, power factor->0.90, IP-20, aluminium housing, operating voltage 100-240V AC and round block etc, incl PVC gutties and flexible wire and connecting to ceiling rose complete all as specified and directed by Engr-in-Charge. Model No D532065 of Wiipro or techno commercial eq model of Make specified.

S&F LED 12 w bulk head fitting not less than 1100 lumen, coolwhite colour, temperature 6500k, CRI-80, THD-<20%, power factor->0.90, IP 65 protection for outdoor application, operating voltage 150-300V AC including connection up with twin core twisted flesible copper conductor cable with suitable size of 230v, 50 HZ complete all as specified and directed by Engr-in-Charge. Model No Garnet 12W (DA 11265) of Wipro or techno commercial eq model of Make specified.

S&F DB sheet metal enclosure 4 way TPN 415 volts double door for mounting MCBs complete all as specified and directed.

S&F DB sheet metal enclosure 8 way SPN for mounting MCB double door complete all as specified and directed.

S&F Isolators DP 32 Amps all as specified and rupturing capacity 10 KA, complete all as specified and directed.

Supply & Fix Isolator TPN 63 Amps 415 Volts rupturing capacity 10KA. complete all as specified and directed.

S&F MCB single pole 5 to 32 Amps C series all as specified and rupturing capacity 10 KA, complete all as specified and directed.

M&L for sub main wiring with two runs of 2.5 Sqmm single core PVC unsheathed and insulated 1100 Volt grade/Multi stranded copper conductor drawn through PVC conduit and accessories fixed an concealed of walls, ceiling floors etc including one run of PVC insulated and unsheathed cable of copper conductor of 2.5 Sqmm single core as earth continuity wire all as specified and directed. Note :- Two runs of single core PVC insulated unshethed cables and one run of earth continuity conductor incl conduit will be messured and paid as one unit length only complete all as specified and directed.

M&L for sub main wiring with two runs of 4.0 Sqmm single core PVC unsheathed and insulated 1100 Volt grade/Multi stranded copper conductor drawn through PVC conduit and accessories fixed an concealed of walls, ceiling floors etc including one run of PVC insulated and unsheathed cable of copper conductor of 4.00 Sqmm single core as earth continuity wire all as specified and directed. Note :- Two runs of single core PVC insulated unshethed cables and one run of earth continuity conductor incl conduit will be messured and paid as one unit length only complete all as specified and directed.

M&L for sub main wiring with two runs of 6.0 Sqmm single core PVC unsheathed and insulated 1100 Volt grade/Multi stranded copper conductor drawn through PVC conduit and accessories fixed on surface of walls, ceiling floors etc including one run of PVC insulated and unsheathed cable of copper conductor of 6.00 Sqmm single core as earth continuity wire all as specified and directed. Note :- Two runs of single core PVC insulated unshethed cables and one run of earth continuity conductor incl conduit will be messured and paid as one unit length only complete all as specified and directed.

Taking down & Refixing Exhaust fan 225mm sweep AC, 240 volts,Metal body ,in same location after cleaning , greasing and painting with synthetic enamel paint by spreying including filling cavities with filler, one coat after cleaning all dusts etc and connecting up including provision of flexible wire from ceiling rose/connector to fan complete all as specified and directed.

Taking down & Refixing Ceiling fan 1200mm sweep AC, 240 volts,Metal body ,after cleaning , greasing and painting with synthetic enamel paint by spreying including filling cavities with filler, one coat after cleaning all dusts etc and connecting up including provision of flexible wire from ceiling rose/connector to fan complete all as specified and directed.

Taking down & refixing of water heater geyser 25 Ltr capacity Glass lined metal body Bajaj New shakti Geyser, vertical type with complete accessories in same location after completion of repair of bldg including painting with synthetic enamel paint by spreying and filling cavities with filler, one coat after cleaning all dusts etc complete all as specified and directed.

Supply, fixing, testing and commissioning 30W LED security light fitting with system output of 3000 lumens & with dedicated street light optics, System efficacy of greater than 100lm/W luminarie should have pressure die cast aluminium LM6 housing. Luminaire should have dedicated street light optics for better uniformity & spacing. Luminarie should have air vents in housing for proper thermal management. Min IP preventation should be IP65. System power consumption (including driver losser) should not exceed 20W complete all as specified and directed. Model No D923065 of Wiipro or techno commercial eq model of Make specified.

S& F security light bracket made out of GI pipe 25mm light grade ISI marked 1.5 Mtr long bend to shape as required for LED fittings at site including M S Clamp 2 Nos made out of flat iron 50 X 5mm with necessary nuts bolts and two coats of alluminium paint over a coat of red oxide primer complete all as specified and directed.

Taking down existing energy meter from site and deposit to MES storeyard and refixing the same meter after completion of work complete all as specified and directed.

S & F Sheet metal enclosures with socket plug top and single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20Amp MCB SP 'C' series of 240 volts complete all as specified and directed.

M&L Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below normal ground level) with top edge of the plate not less than 1.5 meter below normal ground level, connected to galvanized iron wire of 4mm by means of bolts nuts, check nuts and washers of galvanised iron or steel all as shown in electric plate No 5, of SSR Part - I, 1991 & all as specified, testing on completion including provision of earth wire protected by 15 mm dia GI pipe light grade & watering pipe 20 mm medium light grade including all excavation and earth work in any type of soil, PCC pit (1:3:6) type C1 with RCC cover, charcoal, salt, funnel etc complete including making good disturbed surfaces of wall, floor. Note : ( i ) The item includes the cost of 7.5 meter GI pipe for protection of earth lead wire & the cost of 7.5 meter earthing lead strip/wire (ii) Irrespective of what is shown on plate No 5 of SSR Part-I /1991, the cover of earthing pit shall be of precast RCC (1 :2 : 4) type B1 with suitable handle complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi stranded copper conductor 1.5 sq mm nominal cross sectional area, single core, pvc insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No in and including medium grade, PVC Concealed conduit of dia not less than 20mm and conduit accessories, cutting chasing/concealed in wall (Brick/stone masonary), ISI marked with valid CML No (IS-9537-1983 for conduits and IS: 3419:1976 for conduit accessories), with modular metal flush boxes & cover plate with frame of white colour of suitable size as required at site; including PVC insulated multi stranded copper conductor 1.5 sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth duly complete including replastering and making good the surface of wall and painting with existing colour all as specified and directed at site for the following :

One light/Fan point controlled by one way switch.

One Bell point controlled by one switch bell push

One light point controlled by two - 2 way switches for stair case.

One 5 Amps socket on same board with other switches.

One 5 Amps switch socket combination on independent board.

All as per item No-148 here in above but 2.5 Sqmm stranded copper conductor and independent board for 15 Amps switch/ socket point complete all as specified and directed.

S&F modular switch single pole one way 6/10 Amps,1 module, complete all as specified and directed.

S&F modular switch single pole two way 6/10 Amps,1 module, complete all as specified and directed.

S&F moduler socket 6/10 Amps -2/3 pin combined 2 module, complete all as specified and directed.

S&F modular switch single pole one way 16/20 Amps,1 module, complete all as specified and directed.

S&F modular socket 6/16 Amps 2/3 Pin combined 2 module, complete all as specified and directed.

S&F modular fan regulator Step type 120W 2module, complete all as specified and directed.

S&F Modular switch Bell Push 6/10 Amps single pole one way, 2 module, complete all as specified and directed.

Supply & Fixing round surface mounted LED panel 12 W PDC aluminium housing and high translucent frosted plastic diffuser makes it a robust luminaire efficacy 100lm/w complete all as specified and directed by Engr-in-Charge.Model No LCDSPLN-R-12-NWof Crompton or techno commercial eq model of Make specified.

Supply & Fixing round surface mounted LED panel 18 W PDC aluminium housing and high translucent frosted plastic diffuser makes it a robust luminaire efficacy 100lm/w complete all as specified and directed by Engr-in-Charge.Model No LCDSPLN-R-18-NWof Crompton or techno commercial eq model of Make specified.

Supply & Fixing square surface mounted LED panel 06 W PDC aluminium housing and high translucent frosted plastic diffuser makes it a robust luminaire efficacy 100lm/w complete all as specified and directed by Engr-in-Charge. Model No LCDSPLN-S-06-NWof Crompton or techno commercial eq model of Make specified.

Supply & Fixing round recess mounting LED panel 15 W edge lit slim downlight with die-cast aluminium housing finished in premium white powder coating luminar efficacy 100lm/w complete all as specified and directed by Engr-in-Charge.Model No LSCRM-15W-12-NWof Crompton or techno commercial eq model of Make specified.

Supply & Fixing Decorative wall mounting, champagne gold finish fixture eith plastic body including 9 Watt LED lamp B22 base for living & bedroom complete all as specified and directed by Engr-in-Charge. Model No LHFOECE1TZ1O014 of Havells or techno commercial eq model of Make specified.

Supply & Fixing 3 watt LED Bedside light fitting for bedroom including 2.5 KV surge protector complete all as specified and directed by Engr-in-Charge.Model No 48042-3Wof Philips or techno commercial eq model of Make specified.

Supply & Fixing LED 10 w bulk head fitting not less than 1100 lumen, coolwhite colour, temperature 6500k, CRI-80, THD-<20%, power factor->0.90, IP 65 protection for outdoor application, operating voltage 150-300V AC including 2.5 KV surge protector and connection up with twin core twisted flesible copper conductor cable with suitable size of 230v, 50 HZ complete all as specified and directed by Engr-in-Charge. Model No LBHE-10-CDLof Crompton or techno commercial eq model of Make specified.

S&F DB sheet metal enclosure 12 way SPN for mounting MCB double door complete all as specified and directed.

Supply, fixing, testing and commissioning 25W LED security light fitting with system output of 2500 lumens & with dedicated street light optics, System efficacy of greater than 110lm/W luminarie should have pressure die cast aluminium LM6 housing. Luminaire should have dedicated street light optics for better uniformity & spacing. Luminarie should have air vents in housing for proper thermal management. Min IP preventation should be IP65. System power consumption including 10.00 KV surge protector (including driver losser) should not exceed 20W complete all as specified and directed.Model No LSTS-25-CDL/NL-Mof Crompton or techno commercial eq model of Make specified.

VINUBHAI P. CHANDRA

sanu enterprise