NIe-T- 63/2026-27 (Sl. No. 11)

Clearing and Grubbing Road Land Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal ofunserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. (Reference to MoRT&H's specification clause 201) 3(II) By Mechanical Means 3(II)(A) In area of light jungle

Construction of Embankment with Material obtained from Borrow pits Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading,grading to required slope and compacting to meet requirement of table 300-2 & 300-1 .The size course material in the mix of earth ordinarily shall not be exceed 75mm.(Reference to MoRT&H's specification clause 305) Cost of compensation for Earth material & its carriage from private land at 5km distance have been included in the rate.

By Mix in Place Method Construction of granular sub-base by providing graded materials such as natural sand/crushed gravel/crushed stone/combination depending uponthe required grading , spreading in uniform layers with motor grader onprepared surface, mixing by mix in place method with rotavator andcompacting with vibratory roller toachieve at least 98% of the maximumdry density for the material determined as per IS:2720 (Part 8),complete as per clause 401 desire density, complete as per clause 401 Rate per cum for grading-V Material

Water Bound Macadam Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/vibratory roller 8-10 tonnes in stagesto proper grade and camber, applyingand brooming requisite type of screening/ binding Materials to fill upthe interstices of coarse aggregate,watering and compacting to therequired density (eference to MoRT&H's specification 404). 9A By Manual Means 9A(i) Grading-1(Table 400-9) 9A (i)(b) Using Screening (Table 400-10) Type-A (13.2 mm aggregate) PAKUR Using Pakur Variety

Water Bound Macadam Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stagesto proper grade and camber, applying and brooming requisite type ofscreening/ binding Materials to fill up the interstices of coarse aggregate,watering and compacting to the required density (Reference to MoRT&H's specification 404). 9A By Manual Means 9A(ii) Grading-2 (Table 400-9) 9A (ii)(b) Using Screening (Table 400-10) Type-B (11.2 mm aggregate)

Prime Coat Providing and applying primer coat with cationic bitumen emulsion SS1grade conforming to IS:8887 onprepared porous granular surfaceincluding clearing of road surfaceand spraying primer using mechanical means (Reference toMORT&H's specification clause502). i) On WMM/WBM surface @ 0.70-1.0kg/sqm.

Tack Coat Providing and applying tack coat with Cationic bitumen emulsion (RS1) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular/cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503).ii)On Granular surface treated with primer @ 0.25kg-0.30 /sqm.

Bituminous Macadam Providing and laying bituminous macadam using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction (Reference to MORT&H's specification clause504 8a With Continuous Type HMP (60-90 TPH) (i) for Grading 2 (19 mm nominal size ) 50mm thick

Tack Coat Providing and applying tack coat with Cationic bitumen emulsion (MS) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular/cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503).i)On Bituminopus surface treated with primer @ 0.20kg-0.30 /sqm.

Open - Graded Premix Surfacing Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen of approved grade to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled tandem or other approved type roller 8-10 tonne capacity, finished to required level and grades (Reference to MORT&H's specification clause 510). Case - I: Mechanical method using approved grade Bitumen and HMP of appropriate capacity not less than 75 tonnes/hour .