PROVISION OF HIGH MAST LIGHTS, SR TO LT PANEL AND CERTAIN SANCTIONED WORKS UNDER GE (SOUTH) TEZPUR

Amount

Excavating in post holes(or similar holes) each 0.50cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n exc 50m and making good,complete all as specified and as directed.

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m depth for foundation and getting out in soft/lose soil.for fdn etc complete all as specified and directed

Returning, filling incl spreading levelling watering and well ramming in layers not exc 25 cm for soft/lose soil. complete all as specified and directed

Removing excavated material n exc.50 m and depositing where directed at a level n exc 1.5 m above the starting point,complete all as specified and as directed.

M & L for Sand filling under floors or in foundations or in trenches including watering and consolidation complete all as specified and directed.

M & L for Hard core of guage not exc 63mm with brokenstone or boulders deposited spread & levelled in layers n.exc 15cm thick, watered & ramed to a true surface,complete all as specified and directed.

M & L for Cement concrete in foundations , filling and mass concrete type D-2, 1:4:8 all as specified and directed

M&L PCC (1:3:6) Type C-2 using 40mm graded stone aggregate) as in foundation or post holes all as specified.

M/L PCC (1:3:6) type C1 using 20mm grade broken stone aggregate as in padding, hold fasts block filling, filling of steel chowkhats or similar work complete all as specified and as directed

M&L 75 mm thick PCC 1:2:4 type B1 using 20mm graded agg finishing even and smooth using extra cement as in plinth protections/path/paving including filler joints with sealing compound grade 'A' complete all as specifed and as directed.

M/L PCC 1:2:4 as Damp proof course 40 mm thick to horizontal or vertical surfaces including necessary formwork all as specified and directed

M & L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified & discreption

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron gate; framed ; railings of tubular section, ornamental works such as lancers, end caps hooks, decorative shapes and similar work conforming to Fe.290.Gde-E-165,complete all as specified and directed

S & F Joist, channel, angle, or tee sections, fixed independently, with connecting plates, etc. conforming to to Fe 410-W (Gde 250 quality A) complete all as specified and directed

M&L for RCC M-30 (Design Mix) ( 20 mm graded agg) as in foundation, base for column , plinth beam etc complete all as specified and directed

M & LRCC M-30 (Design Mix) (20 mm graded agg) as in column pillers, pier posts and struts complete all as specified and directed

M & L RCC M-30 (Design Mix)(20 mm graded agg) as in RCC lintel band,chajja etc complete all as specified and directed

Use & waste Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc,complete all as specifed and as directed.

Use & waste form work to sides of pillars,posts, struts, piers, columns and stanchions for rough finished surfaces of concrete,complete all as specifed and as directed.

Use & waste Formwork to chullah hoods, chajjas, troughs and similar items including edgeso rough finished flat surface of concrete,complete all as specified and directed

M&L TMT bars 10 mm dia and over cut to length, bent to shape required including cranking bending for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips,complete all as specifed and as directed.

M&L TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders,complete all as specified and directed.

Taking down of shutters of any description n.exc 1.00 Sqm and each,complete all as specifed and as directed.

Taking down of shutters of any description exc 1.00 Sqm and n.exc 1.5 sqm each,complete all as specifed and as directed.

Refixing of shutters of any description exc 1.00 Sqm and n.exc 2.00 sqm each in same opening including of taking down, easing, adjusting and renewal/refixing of builders hardware as required including renewal of unserviceable screws, etc,complete all as specifed and as directed.

S&F solid PVC door frame of size 50mm X 47mm, made out of 5mm plain colour PVC sheet reinfoced with M.S. square tube, supply and fixing in opening as per specification,complete all as specifed and as directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 30mm thick with board core (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing,complete all as specifed and as directed.

Supply and fix, 30 mm thick factory made solid panel PVC shutters (conforming to IS : 4020) consisting of frame made out of mild steel tubes of 19 gauge and size 19 mm x 19 mm for stiles and 15 mm x 15 mm for top and bottom rails. Mild steel frame shall have a coat of steel primer and covered with PVC channel size 30 mm x 50 mm forming stiles and 5 mm thick 75 mm wide PVC sheets for top rail, lock rails, bottom rail on either side and 10 mm thick 20 mm wide cross PVC sheets as gap insert for top rail and bottom rail, panneling of 5 mm thick PVC sheet to be fitted in mild steel frame welded/sealed to the stiles and rails with 30 mm wide x 5 mm thick PVC sheet beading in either side and joint together with solvenet cement adhesive etc an additional 5 mm thick PVC strip of 20 mm width to struck on the interior side of the ‘C’ channel using PVC solvent adhesive including and fitted to PVC door frame,complete all as specifed and as directed.

S& F 100 mm Butt hinges extruded aluminium alloy with with SS Screw,complete all as specifed and as directed.

S&F 75mm Butt hinges type C-21 extruded aluminium alloy with galvanised mild steel hinge pin, anodised,complete all as specifed and as directed.

S&F 150mm long extruded aluminium alloy handle, fabricated type, anodised complete all as specified and directed

S &F Extruded aluminium alloy handles, fabricated type, anodised 100 mm long,complete all as specifed and as directed.

S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws,complete all as specifed and as directed.

S&F door stopper in repairs of aluminium alloy body with double bush type and tongue, over all length of cover plate 140mm, anodised, with hard drawn steel spring, fixed in floor,complete all as specifed and as directed.

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Anodised aluminium window and ventilator shutters(two/three track), sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc,complete all as specifed and as directed.

S & F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S & F 4 mm thick froasted/pinheaded glass in ventilator shutters all as specified and directed by Engr-in charge

Dismanting wall /ceiling board (Fibre pulp insulation) or insulation boards any thickness including cover filters,complete all as specifed and as directed.

S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.55mm size of cross tee and main tee 26x24x0.55mm and 32mm x 24mm x 0.55mm with 1.5mm dia double GI suspentor including supply and fixing of 8mm thick self design MDF board for false ceiling including fixing arrangement from steel tress any type of tress,complete all as specifed and as directed.

S&F 6-10 mm thick PVC hollow panels with to 0.5 mm plain PVC sheet suitably placed in Wall inclding same and matching colour wall angle , u clip, end elip and jointer . As in ceiling and walls including GI grid frame work at 600 mm interval as per specification and drawingall as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises all as directed.

Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm tick screed bed in cement mortar (1:6) complete all as specified and as directed

M&L for non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm screed bed in Cement mortar (1:4) complete all as specified and directed

S&F Coloured Glazed ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm screeding in Cement mortar 1:3 ,complete all as specifed and as directed.

M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) light shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4,complete all as specifed and as directed.

M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cm(1:6) complete all as specified and directed

M & L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and directed

Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water all as directed.

M&L rendering 15 mm thick cement plaster on brick wall in CM 1:4 mixed with WPC if required @ 3% by weight of cement and finished even and smooth without using extra cement if required. (Note : WPC will be measured and paid for separately),complete all as specified and as directed.

M & L, 10mm thick rendering in C.M. (1:6) on brick work finished even and fair without using extra cement,complete all as specifed and as directed.

Supply only Integral waterproofing compound(WPC), conforming to IS and as approved, complete all as specified

M&L Applying two coats of Acrylic emulsion distemper by smart painting method to newly plastered/previously untreated wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly platsered wall all as specefied and directed.

M&L Applying two coats of Acrylic emulsion distemper by smart painting method to old plastered wall over a coat of 1 mm layer wall care putty over a coat of primer including complete removal of existing treatment all as specefied and directed.

M&L preparation of newely plaster sufaces of wall and appplying two coats of weather coat (Exterior emulsion paint) over a coat of 1 mm thick wall care putty and one coats of primer method as per manufacturer complete all as specified and directed.

M & L applying two coats of cement base paint to old surfaces of walls and cornices including preparation of old plastered or unplastered surface of wall by brooming down or steel wire brushing, scrapping down smoke soot,moulds, moss and efflorescent salts and trading oil and greasy spots including proper filling the cracks all as specified and directed

M&L for applying for preparation of new steel surfaces of any description ,over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide all as specefied and directed.

M & L for Concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested dia of pipe 150 mm in PCC 1:3:6 type C2,complete all as specifed and as directed.

M & L 150 mm dia Salt-glazed stoneware drain pipes laid in trenches and jointed as specified and as directed

M & L Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required,complete all as specifed and as directed.

M&L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth,complete all as specifed and as directed.

Supply and fix, as in repair, vitreous china wash down water closet pan (Pedestal pattern) white (excluding flushing cistern )but including seat cover white closed type and flush pipe complete all as specified and directed

S&F in repair vitreous china premium/1st qualit wash down water closet wall hung EWC/ Floor mounted single piece with/ivory/off white (closed pattern incl all necessary accessories like rag blts/gel gasket etc) including 10liters capacity vitreous china valveless syphonic action type flushing cistern low level white, with inlet ball valve float and hanle including brackets complete all as specified and directed.

Supply and fix, vitreous china squatting pan of Orrisa pattern size 580mm x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection making good to floor all as specified and directed.

Supply and fix10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle with 32 mm dia flush pipe including brackets complete all as specified and directed.

S & F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) Vitreous China urinals, bowl type (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe),complete all as specifed and as directed.

S&F PVC (SWR) multi floor trap 75 mm size with grating including jointing with solvent cement complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nut of length 450mm complete all as specified.

Supply and fix, as in repairs, grating round 100/75 mm dia size of stainless steel all as specified and directed.

Supply and fix, as in repair, Overhead Shower 100 mm dia Round Shape Single Flow (brass Chromium Plated) with Rubit Cleaning Syste, including fixing to steel pipe or union of 15mm bore all as specified and direcetd. Essco Cat No Eos-542A or equivalent make of Prayag/Jaquar/Parryware

S & F 15 mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed,complete all as specifed and as directed.Make : ECCO/Pyarry ware/Hindware

Supply and fix15 mm bore pillar tap, fancy type cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe or for brass ferrule all as specified and directed. Make : ECCO/Pyarry ware/Hindware

Supply and fix, 15 mm bore bib taps of two way system, cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.Make : ECCO/Pyarry ware/Hindware

S & F Stop valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type)screwed down, high pressure, with crutch or butterfly handle, for 15 mm bore pipe or for unions all as specified and directed

Supply and fix, vitreous china wash basin, white, size 550 x 450 mm, including GI brackets, brass chromium plated bottle traps for wash basin with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.

Supply and fix, waste coupling CP 32 mm dia for glazed ware basins etc with fly nuts flanged including 610 mm long waste pipe etc complete all as specified and directed.

Supply and fix, PTMT 32 mm 610 mm long waste pipe suitable for WHB complete all as specified and directed.

S&F tubular Towel rail brass chromium plated 600mm long 20mm dia D type complete all as specified and as directed.

S & F soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed

S&F chromium plated toilet paper holder complete all as specified and directed.

S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.50 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

Supply and fix as in repair sheet glass self assembly consisting of 5.5 mm thick toughen sheet glass shelf 12 cm wide/ corner of size 200 mm glass with SS/ brass bracket guard and railing 60 cm long all as specified and directed

Supply & fix in repair 20mm dia anodised aluminium alloy curtain rod includig two Nos of socket and end bracket complete for doors/window opening all as specified and directed.

Taking up or down steel tubing and connections including for refixing or removal 15mm bore all as directed.

Taking up or down steel tubing and connections including for refixing or removal 20mm bore all as directed.

S & F 15 mm bore Tubes, medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors,complete all as specifed and as directed.

S & F 20 mm bore Tubes, medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors,complete all as specifed and as directed.

Supply, lay and fix in repairs 25 mm bore galvanized iron water tubing medium grade including all fittings and fixed laid in trenches complete all as specified and directed.

S&F 15mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete towalls, ceilings or in floors etc., complete all as specified and directed

S&F 20mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., complete all as specified and directed

Supply and fix, 110mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in trenches or floor all as specified and directed.

S&F for PVC (SWR) bend 110mm dia. All as specified and directed

S&F PVC (SWR) junction single (single 'T') equal or unequal 110mm bore,complete all as specifed and as directed.

S & F PVC (SWR) vent cowls 110 mm bore All as specified and directed

S & F PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors,complete all as specifed and as directed.

S&F for PVC (SWR) with bend 75 mm dia. all as specified and directed

S&F PVC (SWR) junction single (single 'T') equal or unequal 75mm bore,complete all as specifed and as directed.

S & F PVC (SWR) vent cowls 75 mm bore All as specified and directed

Taking down carefully unserviceable point wiring (light,fans,socket etc) complete incl battens and fittings such as switch, ceiling rose,light fittings, regulatos, socket etc and making good disturbed surface of wall/floor etc complete all as specified.

Taking down of ceiling fanExhaust fan of any size including its all accessories and refixing it at same position after all work,complete all as specified and as directed.

M & L for point wiring for one light /fan point with 1.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FR cable controlled by one way switch, drawn through PVC casing caping with all accessories incl 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated and unsheathed for earth continuity connected to common earth dolly and sunken cast pressed steel terminal box fixed flush to wall of not less than 1.6 mm thick for mounting of fittings such as switch, socket and speed regulator with 3 mm thick Laminated bakelite sheet (Make' Hylum') cover all as specified and directed.

All as per Ser item No.102 above but for 5 amps socket on independent board,complete all as specifed and as directed.

All as per Ser item No.102 above but with 2.5 sqmm cables for 15 amps switch socket combination outlet on independent board complete all as specified and directed.

M & L for point wiring for one light/fan point/call bell controlled by one way switch. with 1.5 Sq mm (nominal area) PVC insulated and unsheathed single core FRLS copper cable 1100 volts grade with multi-stranded copper conductor in and including PVC concealed conduit and conduit accessories alongwith continuous earth wire 1.5 Sq mm PVC insulated and unsheathed single core FRLS cable 1100 votls grade with stranded copper conductor and connected to common earth dolly complete for housing the switches, socket outlets, fan regulators etc. for the following (Rate deemed to be inclusive of cutting chases and making good disturbed surface),complete all as specified and directed

All as per Item No 105 above but one socket outlet 5 pin 6 amps on independent board,complete all as specifed and as directed.

All as per Item No 105 above bu one 5 amps socket outlet on same board with other switch.

M & L for point wiring with 2.5 Sq mm (nominal area) PVC insulated and unsheathed single core FRLS copper cable 1100 volts grade with multi-stranded copper conductor in and including PVC concealed conduit and conduit accessories alongwith continuous earth wire 1.5 Sq mm PVC insulated and unsheathed single core FRLS cable 1100 votls grade with stranded copper conductor and connected to common earth dolly, complete for one socket outlet 6 pin 15/16 amps on independent board (Rate deemed to be inclusive of cutting chases and making good disturbed surface),complete all as specifed and as directed.

Supply and fix Modular switch one way 10 Amp,complete all as specifed and as directed.

Supply and fix Modular switch one way 20 Amp,complete all as specifed and as directed.

Supply and fix modular socket outlet 2 in 1, 3 pin 10 A,complete all as specifed and as directed.

Supply and fix modular socket outlet 2 in 1, 3 pin 20 Amps,complete all as specifed and as directed.

Supply and fix switch socket combination outlet flush type, 5 Pin, 5 amps,complete all as specifed and as directed.

Supply and fix switch socket combination outlet universal type 5 pin 5/16 amps,complete all as specifed and as directed.

Supply and fix ceiling rose surface backelite 65x50 mm having 3 terminals,complete all as specifed and as directed.

Supply and fix modular type electronic fan regulator,complete all as specifed and as directed.

Supply and fix in repair Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps concealed in wall all a directed.

S & F in repair 9 Watt LED bulb fitting, colour temp 6500k, all as specified and directed by Engr in charge .Make-Havells,Cat No-LHLDEUECNL8R009 or JAQUAR cat Log No LSAR4KV05B2C or equivalent phillips

Supply and fixing in repair recessed dust free LED fitting 36 watts size(2X2)'' soft light glare free homogenous illumination very high efficiency enviormental friendly long life complete making all connection using three core PVC insulated copper conductor muilti strandard flexible cable drawn through in PVC flexible conduit pipe from fitting to ceiling rose complete all as specified and directed. Make-Havells,Cat No-VENUSNEOHE2X2R36WLED830PIRSENSOR or JAQUAR cat Log No LULTSLS036XC equivalent make of Bajaj/Usha/Phillips

Supply and Fixing wall mounted LED batten, polycarbonate housing & integrated electronic driver. LED light fittings flicker free, instant start with uniform light distribution 20W 4 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting. Make of Havells cat no.LUMILINEBS20WLED830SPCWH or JAQUAR cat log No LKBPOISO20XC Equivalent make of CG/Bajaj/Usha/Philips

Supply and Fixing wall mounted LED batten, polycarbonate housing & integrated electronic driver. LED light fittings flicker free, instant start with uniform light distribution 9/10W 2 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting. Make of Havells cat no.LUMILINEBS10WLED865SPCWH or JAQAR cat log No LKBP4KV010XC Equivalent make of CG/Bajaj/Usha/Jaquar/Philips

Supply and fix of LED light fitting 1X9/1X10W bulkhead luminaires including LED light driver holder including connecting up with three core flexible copper conductor cable of suitable size completeall as specified and directed. Make :- Havells cat No. RUGBYGENXFTS10WLED865SSYMBOPC or JAQUAR cat log No LBLK02X010XC. Make of CG/Bajaj/Usha/Jaquar/Philips

S & F Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), SPN, 240 volt, 8 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete and all disturbed surfaces of wall shall be made good to match the existing wall finishes all as specified and directed by Engineer-in-charge. Make: Havells/Legrand/L&T/Schneider/Standard/HPL

Supply and fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single pole and neutral and current carrying capacity 32 Amps in the MCB DB complete with connection testing and commissioning.. Make: Havells/Legrand/L&T/Schneider/Standard

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.. Make: Havells/Legrand/L&T/Schneider/Standard

Supply and fixing of LED street light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete with GI Pipe 40 mm dia bracket made out 120 degree in shape with 2 No GI strip clamps, nut bolts and washers all as directed Make of Havells cat ENDURASUNDOWNSL25WLED765PASYBOPCIHD and Equivalent CG/Bajaj/Usha/Jaquar/Philips

S& F PVC Body exhaust fan of sweep 250 mm sweep copper wounded energy saving single phase ,230 volts,50 HZs with louver and its connecting accessories including making all electrical connection using three core PVC insulated copper conductor drawn through flexible conduit pipe from fitting to ceiling rose . Make- Crompton/Havells/Bajaj/Usha

S&F Heavy duty exhaust fan size of sweep 300 mm copper wounded winding energy saving single phase, 230 volts, 50 HZs with louver, set of sweep and all connecting accessories including making all electric connection using three core PVC insulated copper conductor muilti strandard flexible cable drawn through in PVC flexible conduit pipe from fitting to ceiling rose complete all as specified and directed. Make of Usha TURBO HDEF 900RPM and Equivalent CG/Bajaj/Havells/Jaquar/Philips

Material & Labour for earthing with galvanised steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead by means of bolts, nuts check nuts and washers of galvanised iron or steel using GI strip 32x6 mm as earthing lead as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1 using 20mm graded stone aggregate pit, funnel, 20mm dia GI light grade watering pipe, 40mm dia GI light grade earth lead protection pipe, CI frame and cover, wire, copper lugs etc mesh, chorcoal and common salt in alternatee layer complete all as specified and directed by Engr-in-Charge.

Supply and fix electric water heater, storage type, heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, stainless steel connection pipes etc. complete all as directed Make-Havells,cat No-GHWAPDTWB025 or equivalent make of Crompton /Usha/Bajaj

Supply and fix in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position size 1000 ltrs all as specified in SSR Part I,complete all as specifed and as directed.

Supply and fix in repairs Tank Nipple suitable for HDPE water tank. (Minimum weight 20mm- 45gms),complete all as specifed and as directed.

Supply and fix in repairs Gun-metal, globe or gate valves 25 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed,complete all as specifed and as directed.

Supply and fix in repairs Gun-metal, globe or gate valves 20 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed,complete all as specifed and as directed.

Supply and fix in repairs Ball valves 20 mm dia high epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 m m - 2 1 0 g m s),complete all as specifed and as directed.

S&F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq mm 2 core,complete all as specifed and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 400 sq mm 3.5 core all as specified and directed.

Taking out and relaying of existing cable of any size and dia from DG Set to Panel.Note Excavation,Returning,Removing and sand etc. if required measured and paid seperatly under relevent items,complete all as specifed and as directed.

M&L for Brick Sub Class 'B' locally available best quality laid in trenches with width equal to length of the bricks, above sand cushioning for cable protection complete all as specified and as directed.

Supply, lay and fix 40 mm bore galvanized iron water tubing Medium grade including all fittings and fixed/ laid in trenches or on poles including taking town old unserviciable pipe,complete all as specified and directed.

S&F steel water tubing 50 mm dia of bore light grade galvanised with all fittings laid in trenches / fixing with surface of wall after drawn through electric cable by means of nuts bolt and washers all as directed .

S&F steel water tubing 80 mm dia of bore light grade galvanised with all fittings laid in trenches / fixing with surface of wall after drawn through electric cable by means of nuts bolt and washers all as directed .

Supply & installation of 16M high mast shaft in two section suitbale for 55 m/sec wind speed along with head frame, luminiaries carriage suitable for 08 luminiaries in symmetrical arrangement and other accessories manufactured in factory with raising lowering system comprising of double drum winch, 5mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightining finial, wiring material from JB to individual luminiare & MCB in base compartment are a part of installation, foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template and outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP contactor for the automatic switching of luminiaries, power tool control with 2 No 9A contactors and raise lower push button, incoming 35 sq.mm and outgoing 16 & 2.5 sq.mm terminals as specified here-in-after complete all as specified and directed. Note: Necessary concrete work,TMT,formwork, RFR removal of surplus earth, external finishes and other unforeseen items shall be measured and paid seperatly under relevent Items. Make-Bajaj,Cat No-BMRLMW16S1,Make-Crompton,Cat No-HM-16A-LM-ACC or equivalent make as mentioned in list of make in particular specification.

HIGH MAST SYSTEM Height of mast : 16 Meter No. of Section : Two Material Construction : S355 Grade as per BSEN 10025 Base dia and top diameter (A/F) : Top : 150mm Bottom : 460 mm Cross section of Mast : 20 side polygon Standard for Galvanisation : A per BS EN ISO 1461 Size of Opening and door at base : 1200 x 250 mm Diameter of base plate : 670 mm Thickness of base plate : 25 mm Lighting protection finial : GI single spike of length 1200mm Max wind speed : 180 kmph as per IS 875 (Part III) Number of foundation bolts : 12 Nos PCD of foundation bolts 590 mm Type / diameter / length of foundation bolts : TS 600/30mm dia/ 850 mm long

FOUNDATION DETAILS (RATE INCLUDED) 1. Excavation in soft/loose soil dimension as per drawing 2. Lean Concrete 100 mm thick ( 1: 4: 8) D2 (using 40mm graded Aggregate) 3. CTD (ISD) bars foundation/column as per drawing layers 4. RCC (M30) concreting for foundation/column as per drawing including use & waste of framework etc complete 5. Foundaiton bolt as per drawing The foundation and connected works shall be measured and paid under the relevant items seperately

LUMINAIRES CARRIAGE Material of construction : 50 NB ERW Class B-M.S Pipe Diameter of carriage ring (mm) : 535 mm (ID) Construction : 06 Arm, Welded, 2 Sections Load carrying capacity : 08 Luminaire

STAINLESS STEEL WIRE ROPE Grade / construction : AISI 316, 7/19 Construction Number of Ropes : Two Continuous Diameter (mm) : 6 mm Breaking load Capacity : 2350 Kg x 2

WINCH / POWDER TOOL Type /SWL of winch : Double drum, SWL 750 Kg - SGDDMethod of Operation : Integral MotorMotor Capacity : 1.0 HP ( Including suitable starter) No of Speeds : 6 Pole, Single speed Torque Limitor ; With Mechanical Tripping Facility

TRAILING CABLE Conductor : Copper, 5 core, 2.5 Sqmm Insulation : EPR insulated PCP scheathed No.of circuits per mast : One

Supply and fixing LED flood light 200 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP 66 protection, with impact and corrosion resistant complete with driver and lamp all as specified and directed. Make Havelss Model No. JETAIRISMAXFL200WLED757PWBLTG or equiavlent make in Cropmton/Bajaj/Phillips/Surya

Supply and fixing street light panel frame size 2, 3 phase having load capacity 12 KW, digital timer 24 Hrs, IP 65, contractor rating 63 Amp, MCB TPN rating 63 Amp complete all as specified and directed. Make Havells Model No. IHXTS09120 or equivalent make in Legarnd/L&T/C&S

M&L for Boring holes horizontally under Road without damaging the surface of Road (minimum 1.0 METRE below the Road Surface / footpath with the help of GI Tubing not exc. 80mm bore (dia) for passing of UG Cable, complete all as specified and directed NOTE: GI Pipe laid will be measured and paid separately under appropriate Item.

S&F Cable jointing kit for 1100 Volts grade cable for outdoor end termination heat shrinkage type complete with jointing material and accessories suitable for 3.5 core XLPE Armoured conductor cable of size 400 sq mm,complete all as specifed and as directed.

S&F in replacement of 4 pole power contractor type MNX 550 of AMF control of capacity 415 volts 3 phase 50 Hzs,600 amps as per IS 13947,IEC 60947,EN-60947 Complete with testing and commissioning.Make-Siemens/Schneider/L&T/Legrand/Havells

S&F in replacement of 4 pole power contractor type MNX 110 of capacity 415 volts,160 amps as per IS 13947,IEC 609474-4-1,EN-60947-4-1 Complete with testing and commissioning.Make-Siemens/Schneider/L&T/Legrand/Havells

M&L for applying two coat of epoxy paint over a coat of red oxide primer after prepration of new steel surface over 10 cm width or girth. complete all as specifed and as directed.

Surface dressing n.exc 15 cm deep in soft/loose soil,complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confrming to IS 1161-1979 grade St-240 medium weight.Complete all as specified and as directed. Note 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor's firm name while carriying out any activities in defence area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies and Royalty charges as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)

MAHANTA ENTERPRISES

M/S N S CONSTRUCTION

PURBANCHAL BUILDERS

Chinmay Traders