REPAIR/MAINTENANCE OF INTERNAL ELECTRIFICATION AND OTHER ALLIED WORKS AT ZONE 2A AND 2B, 4, 3A AND 3B UNDER GE (S) TEZPUR

Amount

M&L for rewinding of ceiling fan,1200mm any make and any type of model, after taking burnt out old winding wire complete and cleaning the internal slots of rotor with ring and rewinding the ceiling fan with super enamelled copper winding wire of suitable SWG Varnishing, baking in oven and reassembling with new bearings (both) and new capacitort complete all as specified and directed

All as in Item No 1 as above but for ceiling fan of 1400mm size

All as in Item No 1 as above but for Exhaust fan of 200/225 mm size

All as in Item No 1 as above but for Exhaust fan of 300/400 mm size

M&L for painting of fan (ceiling fan / exhaust fan/wall mounted fan ) any sweep with applying one coat of synthetic enamel paint (Ceiling Fan -White Paint and Exhaust fan - Gray Paint ) by spray machine including preparation of old painted surfaces with filling of cavity by filler with and including writting of MES No. of fan in capital letters with black synthetic enamel paint of height not less than 20mm on fan body in approved pattern complete all as specified and directed.

Supply and Fix louver shutter (with Mosquito net made out Aluminium wire cloth 0.36 mm nominal dia ) made out GI sheet (Thickness of louver shutter Body 1mm ,shutter Fins 0.5 mm fixed with 3 mm GI wire ) for Exhaust fan 300/400 mm sweep including proper fixing with screw in wall at existing Hole including taking down old unsv louver shutter complete all as specified and directed.

S & F Ball bearing (Bearing No- 6201/6202) of ceiling fan/Exhaust Fan of any make, any model and any sweep including taking down old unsv bearing complete all as specified and directed . Make : NBC/ SKF/ TATA

S & F Capacitor( 2.5-4) MFD for ceiling fan/Exhaust Fan of any make, any model and any sweep including taking down old unsv capacitor. Make- Havells/Usha/Tibcon/Universal

S & F Down rod 15mm bore medium grade GI pipe including cut in required length and drilled as per existing size including taking down old unsv down rod complete all as specified and directed.

S & F Fan blade for Ceiling fan of 1200mm sweep of white colour including taking down old unsv fan blade complete all as specified and drected.

S & F in repair Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), SPN, 240 volt, 8 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete and all disturbed surfaces of wall shall be made good to match the existing wall finishes all as specified and directed by Engineer-in-charge. make- L&T/Havells/C&S/legrand/hager.

S & F in repair Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), SPN, 240 volt, 6 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete and all disturbed surfaces of wall shall be made good to match the existing wall finishes all as specified and directed by Engineer-in-charge . made- L&T/Havells/C&S/legrand/hager.

S & F Power line vertical type TPN DB double door 4 way, IP 43 suitable for MCCB 100 amps CRCA sheet metal enclouser with detachable gland plates for flush / surface mounting with bus bar neutral link and Earth Bar in concealed and all disturbed surfaces of wall shall be made good to match the existing wall finishes complete all as specified and directed. make- L&T/Havells/C&S/legrand/hager.

S&F in replacement of metering Panel, powder coated factory made for mounting Electric meter at stair case for 4 electric meters, box should be cubical indoor type modular design of not less than 900 mm x 900mm x200mm , with 2mm thick CRCA sheet steel with IP 52 tested, fabricated by welded frame construction with CRCA frame section, compartmentalised (Modular) desing. The cable entry shall be from the bottom and top of the panel provided with suitable dia brass gland plates for provisioning specific bending radius for cable. The panel shall have opening arrangements front side mounted on hinges as and fitting fixure in wall as specified and directed .

S & F in repair MCB SP 6 to 32 Amp, B series , 230 Volts complete all as specified and directed . Make - L&T/Havells/C&S/legrand/hager.

S & F in repair MCB DP 6 to 32 Amps, B series, 230 Volts complete all as specified and directed . Make - Scheinder/Havells/C&S

S & F in repair MCB DP 40-63 Amps, B series, 230 Volts complete all as specified and directed. Make - Scheinder/Havells/C&S

S & F in repair MCB TPN 40-63 Amps, B series, 10 KA "B" series 415 Volt complete all as specified and directed. Make : L&T/Scheinder/Havells

S & F in repair MCCB 4 Pole 415V Fixed type 25-100A with breaking capicity 16 KA complete all as specified and directed. Make : L&T/Scheinder/Havells

S & F in repair RCBO 2 Pole 32A, 230V , sensitivity 100mA, having protection for earth leakage, overload and short circuit complete all as specified and directed. Make : L&T/Scheinder/Havells

Taking down the existing U S wiring carefully of aluminium/copper point wiring (light, fan, bell, socket, power point etc.) with conduit/casing caping, along with all connected accessories complete all as directed.

M&L for point wiring complete for One light point with 1.5 Sqmm single core multistranded copper conductor FR PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through PVC casing caping including provn of 1.5 sqmm single core multistranded copper conductor FR PVC insulated and unsheathed as earth wire continuity including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition) complete all as specified and directed. wire Make- polycab/havells

All as per Item No 22 above but for one fan point

All as per Item No 22 above but for One 3 pin 5 Amp socket outlet on the same board

All as per Item No 22 above but for One 3 pin 5 Amps socket out let on independent board

All as per Item No 22 above but with 2 x 2.5 Sqmm +1 x 1.5sqmm Copper conductor cable for one 3 pin, 15 Amps Switch socket out let on independent board.

All as per Item No 22 above but for one bell point controlled by one 5 amp switch

All as per Item No 22 above but for one light point controlled by two two way switches

S & F in repair electronic fan regulator,100W ,230V ,50Hz stepped socket type for ceiling fan complete all as specified . Make- Anchor/Leader/Standard

S&F in repair switch piano type, 5 Amp. SP, one way all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG

S&F in repair switch piano type, 15 Amp. SP, one way all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG

S&F in repair switch socket outlet, 2 in one 5 pin, 5 Amp, piano type all as directed/ specified. Make- legrand/Anchor/ Havells

S&F in repair switch socket combination 2 in 1, 6 pin 5 and 15 Amp flush type universal all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG

S&F in repair switch bell push, flush type, 5 Amp all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG

S&F in repair bell, AC, 230 V, SP, ding dong type all as directed & specified. Make Anchor/leader/ Bajaj

S&F in repair of Ceiling rose 3 phase, PVC/ Polycarbonate body all as directed/ specified.

S&F in repair switch two way switch flush type, 5 Amp all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG

M&L in repair for PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep complete all as specified and directed.

M&L in repair for PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 175 mm x 100 mm and 50 mm deep complete all as specified and directed.

M&L in repair for PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 200 mm x 105 mm and 50 mm deep complete all as specified and directed.

M&L in repair for PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 250 mm x 200 mm and 50 mm deep complete all as specified and directed.

M&L in repair laminated sheet or hylam sheet for mounting, switches, sockets, fan regulator etc. of any size as per site requirement complete all as specified and directed.

S & in repair PVC casing caping of any size complete all as specified and directed.

M & L for Point wiring for one light point with 1.5 sqmm PVC insulated and unsheathed copper conductor multistranded 1100 volts grade, ISI marking drawn thorugh and existing/new non metallic PVC rigid conduit and conduit accessories, medium grade, ISI marking, concealed Frame for fixing switches, sockets, inculding one run of 1.5 sqmm PVC insulated unsheathed copper cable FRLS grade as in earth wire for continuity and connecting to earth dolly for one light point controlled by one switch complete including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the wall (wash/paint/distemper) wherever required(as per the existing condition) all as specified and directed Note - The cost of modular metal flush box and Modular white Cover Plate with Frame, MS terminal boxes, laminated hylem sheet if required shall be deemed to be included in the unit rate. make- polycab/havells

All as per Item No 44 above but for one fan point

All asper Item No 44 above but for One 3 pin 5 Amp socket outlet on the same board

All as per Item No 44 above but for One 3 pin 5 Amps socket out let on independent board

All as per Item No 44 above but with 2 x 2.5 Sqmm +1 x 1.5sqmm Copper conductor cable for one 3 pin, 15 Amps Switch socket out let on independent board.

All as per Item No 44 above but for one bell point controlled by one, one 5 amp switch

S&F in repair modular switch flush type, 6 Amp. SP, one way ,1 module all as directed specified. Make- Anchor/ Havells/Bajaj/ CG

S&F in repair modular socket outlet, 3 pin, 6 Amp, flush type 2 module all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG

S&F in repair modular switch, 16 Amp flush type 1 module all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG

S&F in repair modular socket outlet, 3 pin, 6/16 Amp flush type 2 module all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG

S&F in repair modular bell push, flush type, 5 Amp,1 module all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG

S&F in repair modular Fan Regulator step type 2 module ,120W all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG

Taking down old unsv submain wiring of any size complete all as specified and directed

M&L for sub main wiring with two run of 4.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 2.5 Sq mm drawn through PVC conduit and all accessories,including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition), complete all as specified. Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length.

All as in Item No-57 above but for 2x6.0 sqmm+1x4.0sqmm earth wire

Supply and fixing single phase Electronic tamper proof energy meters with LCD display of 10-60A capacity 230V AC 50Hz ISI marked and celing the meter(Top & Bottom covers) with suitable lead wire and connecting up incomming and outgoing cable connetions to meter including taking down old unsv meter and taking to MES Store including earthing of meter including testing and commisioning complete. Make: L&T /HPL

S& F ceiling fan of sweep not less than 1200mm, 5 star, BLDC type motor, with hanger including taking down existing old unseviceable ceiling fan and taking to MES Store as specified and directed. Make- Havells/Bajaj/Usha

S& F exhaust fan of sweep 200/225 mm including taking down existing old unseviceable ceiling fan and taking to MES Store as specified and directed. Make- Havells/Bajaj/Usha

S & F 15 Watt LED fitting, B22 base, 3 star, colour temp 6500k, including taking down old unserviceable type bulb all as specified and directed by Engr in charge . make-Havells /phillips/bajaj

S & F angle bulb holder for LED fitting, B22 base, including taking down old unserviceable type holder all as specified and directed by Engr in charge.

Supply and Fixing in repairs wall mounted LED batten, polycarbonate housing & integrated electronic driver. LED light fittings flicker free, instant start with uniform light distribution 10 W/9W 2 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting. Make Havells Philips/Havells/CG .

Supply and Fixing in repairs wall mounted LED batten, polycarbonate housing & integrated electronic driver. LED light fittings flicker free, instant start with uniform light distribution 20W 4 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting as per Make Havells hilips/Havells/CG.

S & F 12 Watt LED fitting surface mounted including surface accessories , 6500k, colour temp >= 5700K with die cast body with premier diffuser ensuring glare free light including taking down old unserviceable type downlighter all as specified and directed by . make-Havells/phillips/bajaj

M & L Earthing complete with GI earth plate electrode 60cmX60cmX6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connecting to galvanized earth strip 32 x 6 mm as earthing conductor by means of bolts, nuts, check nuts and washers of GI and all as shown in Electrical plate No.3 of SSR Part I and including testing on completion all as specified locations and as directed by the Engineer-in-Charge. Note: 1.The above quoted rate shall include cost of main earthing lead of 32 x 6mm GI earth strip, charcoal, salt, excavation and earth work in any type of soil CI cover, funnel with 20mm dia light grade GI water pipe including GI protection pipe 40mm dia light grade for earth strip etc. 2. The cost of earth pit is deemed to be included in the unit rate. 3. The cost of taking down old unsv earthing with all its accessories is deemed to be included in the unit price.

S & F in repair connection pipe (both hot & cold) of any size as per site requirement for geyser of any capacity complete all as specified and directed. Note- Both hot and cold pipes are deemed to be one unit.

Supply and fix Heating element of 1500/2000 watts suitable for 25 ltrs capacity water heater including taking down old unsv element complete all as specified and directed.

S & F Thermostat of range 0-80 degree Celsius suitable for 25 Ltrs water heater including taking down old unsv thermostat complete all as specified and directed. 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor's firm name while carriying out any activities in defence area for better check of security purpose.

M/s. M. G. Babloo Das

M/S Manjit Singh

United Traders

M/S ROY TRADING

D.B ENTERPRISE

Chinmay Traders