Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.0 LAccepted-AOC H NO 54 8 DARMYANA MUHALLA DISTT MANDI 1750051 | MANDI | MANDI | HIMACHAL PRADESH | 175005 | L1 | Accepted-AOC Bidder is L1 | |
| 2 | L2₹7.6 L+₹64,098.77 (9.21%)Rejected-Finance V P O KATAULA TEHSIL SADAR DISTT MANDI 175005 | MANDI | MANDI | HIMACHAL PRADESH | 175005 | L2 | Rejected-Finance Quoted rates are higher |
Tender Value
₹8.3 L
EMD Value
₹16,514
Closing Date
12 Apr 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Superintending Engineer, South Campus Kamand
O/o Superintending Engineer, South Campus Kamand HP-175075
Extension of IC Engine lab by constructing a hall of size 12.10 mtrs X 4.90 mtrs on first floor at south campus of IIT Mandi
2022_IITMD_677916_2
IITMandi (CW)/SE-1247/2021-22/7240-42 dt.09.03.22
Open Tender
Civil Works
Item Rate
90 days
South Campus of IIT Mandi
please refer to NIT
2 documents required · 2 mandatory
₹1,180
The Registrar IIT Mandi
₹16,514
5 May 2022
31 Mar 2022
13 Apr 2022
31 Mar 2022
12 Apr 2022
31 Mar 2022
31 Mar 2022 - 8 Apr 2022
75 days
Amount
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) as per entire satisfaction and direction of Engineer -in-charge including carriage of material in all lead and lift.
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform as per entire satisfaction and direction of Engineer -in-charge including carriage of material in all lead and lift.
Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls Under 20 cm wide as per entire satisfaction and direction of Engineer -in-charge including carriage of material in all lead and lift.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more as per entire satisfaction and direction of Engineer -in-charge including carriage of material in all lead and lift.
Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level. Masonry work (second sort), in cement mortar 1:6 (1 cement: 6 coarse sand) as per entire satisfaction and direction of Engineer -in-charge including carriage of material in all lead and lift.
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate as per entire satisfaction and direction of Engineer -in-charge including carriage of material in all lead and lift.
12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) as per entire satisfaction and direction of Engineer -in-charge including carriage of material in all lead and lift.
6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) as per entire satisfaction and direction of Engineer -in-charge including carriage of material in all lead and lift.
Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) : Raised and cut pointing as per entire satisfaction and direction of Engineer -in-charge including carriage of material in all lead and lift.
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) as per entire satisfaction and direction of Engineer -in-charge including carriage of material in all lead and lift.
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per entire satisfaction and direction of Engineer -in-charge including carriage of material in all lead and lift.
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats as per entire satisfaction and direction of Engineer -in-charge including carriage of material in all lead and lift.
Mahender Kumar Contractor
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .