155/2023-24 construction of anganwadi

Amount

construction of anganwadi

Stone for masonry work

Portland Cement

Coarse sand (zone III)

Sundries

Laterite stone of size 35x20x20cm

Solid blocks of size 40x20x10cm

Structural steel such as tees, angles, channels and R.S. joists

Red oxide Zinc chromate primer

Adjustable telescopic prop 3 m (2.02-3.75m)

Beam clamp 300-380 mm (450-1070 mm)

Second class kail wood in planks

Second class kail wood in scantling

Second class kail wood in scantling

Hollock ballies 125 mm diameter

Adjustable span ESO+SI (2.35-3.40)

wall form panel 1250x500 mm

Corner angle 45x45x5 mm 1.50 m long

100 mm channel shoulder 2.5 m long

Double clip (bridge clip)

Single clip

M.S. Tube 40 mm dia

Wall form panel 1250x450xmm

Corner angle 45x45x5 mm 2.50 long

Column clamp 450x1070 mm

Prop 2 m (2-3.5m)

Stone Aggregate(single size):20 mm nominal size

Stone Aggregate(single size): 10 mm nominal size

Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper

Vibrator (Needle type 40 mm)

Safeda ballies 125 mm diameter

Twisted steel/deformed bars

Fine sand (zone IV)

Stone Aggregate(single size): 40 mm nominal size

Anjili wood scantls

Mild Steel round bar above 12 mm dia

Flats up to 10 mm in thickness

Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm

Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm

Bright finished or black enameled mild steel screws 40 mm

Bright finished or black enameled mild steel screws 20 mm

Anjili wood planks

Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)

Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre

Plastic emulsion paint

PVC pipe 25 mm outer dia. 10kgf cm2

PVC pipe 63 mm outer dia . 6kgf/cm2

PVC pipe 110 mm outer dia. 4kgf/cm2

200 mm Aluminium aldrop

Oxidised mild steel tower bolt (barrel type) 200x10 mm

Oxidised mild steel screws 30 mm

Brass mortice latch and lock 100 x 65 mm with6 levers and a pair of brass lever handles

Brass hard drawn hooks and eyes 150 mm

Vitreous China flat back wash basin 630x450 mm

15 mm C.P.brass tap

C.P. brass waste 32 mm

C.I. bracket for wash basin and sinks

Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm

Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers

Vitreous china pedestal type wate closet

Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)

15 mm PTMT bib cock

Rectangular shape 453x357 mm Mirror with Plastic moulded frame

Hard board 6 mm thick

Rawl plug 50 mm (designation 10 nos)

Chromium plated Brass screws 25 mm

PTMT - Towel Rail (600 mm)

Second class teak wood in scantling

C.P. Brass angle valve 15 mm

PTMT - Soap Dish/Holder 138x102x75 mm

Brass full way valve with C.I. wheel (screwed end) 25 mm dia

Polyethylene water storage tank with cover and suitable locking arrangemnet

PVC pipe 25 mm outer dia . 12 kgf/cm2

Vitrified floor tile 50x50 cm

Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black

Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc.

Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile

Mild steel tubes hot finished welded type

Welding by electric plant

Bidder Name

HUSSAIN V