Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L4₹6.2 L+₹54,131.24 (9.62%)Accepted-AOC | L4 | Accepted-AOC L1 | |
| 2 | L1₹5.6 LRejected-AOC | L1 | Rejected-AOC L2 | |
| 3 | L2₹6.1 L+₹48,128.26 (8.55%)Rejected-AOC | L2 | Rejected-AOC L4 | |
| 4 | L3₹5.7 L+₹11,842.74 (2.10%)Rejected-AOC | L3 | Rejected-AOC L3 |
| Sl No | Description | Qty | Unit | P C SADHIC L1 | SABURAJ T CHACKO L3 | BIJU KM L2 | THE MANANTHAVADY SC ST LABOUR CONTRACT CO OPERATIVE SOCIETY NO C397 L4 |
|---|---|---|---|---|---|---|---|
| 1.00Detailed estimate | |||||||
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1,595.2 | kg | 144.9 ₹2,31,144.48 | 135.82 ₹2,16,660.06 Lowest | 145 ₹2,31,304 | 158.86 ₹2,53,413.47 |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 306.16 | sqm | 652.38 ₹1,99,732.66 | 770 ₹2,35,743.2 | 642 ₹1,96,554.72 Lowest | 715 ₹2,18,904.4 |
| 1.00 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 30 | metre | 437.73 ₹13,131.9 | 500 ₹15,000 | 430 ₹12,900 Lowest | 479.9 ₹14,397 |
| 1.00 | 13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work | 884.32 | sqm | 88.27 ₹78,058.93 Lowest | 100 ₹88,432 | 101 ₹89,316.32 | 96.77 ₹85,575.65 |
| 1.00 | 13.111.1:Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface | 66.78 | sqm | 108.42 ₹7,240.29 Lowest | 150 ₹10,017 | 115 ₹7,679.7 | 118.87 ₹7,938.14 |
| 1.01 | 17.7.4:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap | 1 | each | 1,632.42 ₹1,632.42 Lowest | 2,500 ₹2,500 | 1,965 ₹1,965 | 1,788.89 ₹1,788.89 |
| 1.01 | 18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | 500 | Litre | 9.41 ₹4,705 Lowest | 10 ₹5,000 | 10 ₹5,000 | 10.31 ₹5,155 |
| 1.01 | 4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.58 | cum | 6,638.22 ₹3,883.36 Lowest | 8,000 ₹4,680 | 7,600 ₹4,446 | 7,278 ₹4,257.63 |
| 1.01 | 50.9.3.1:Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood | 5.04 | sqm | 2,593.96 ₹13,073.56 Lowest | 3,500 ₹17,640 | 2,800 ₹14,112 | 2,843.97 ₹14,333.61 |
Tender Value
₹6.8 L
EMD Value
₹16,949
Closing Date
4 Oct 2025, 4:00 pmClosed
Assistant Executive Engineer
Office of assistant executive engineer PWDbuilding subdivision Mananthavady
GENERAL-Non Plan2025-26 maintenance to II 5/22, II 6/22, II 11/22, II 12/22 NGO Quarters Mananthavady-Providing Galvanized iron sheet to preventing leak proofing to II 5/22, II 6/22, II 11/22, II 12/22 NGO Quarters Mananthavady-General Civil Work
2025_PWD_802658_1
PWD/BLDG/TR/12838/2025_5_1_1/1
Open Tender
Civil Works - Buildings
Item Rate
Mananthavady
Please refer Tender documents.
12 documents required · 12 mandatory
₹1,495
Yes
₹16,949
Yes
31 Oct 2025
26 Sept 2025
6 Oct 2025
26 Sept 2025
4 Oct 2025
26 Sept 2025
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1333879.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .