Providing New Bore well Pump set and Pipe line K Ubicherla and ubicherla GP in gooty Mandal

Geological survey charges for drilling of bore well

Drilling of Bore well by down the hole hammer drilling to a finished dia of 165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion ofcasing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2800 Part I & II 1979 and amended from time to time Drilling of Bore well 163/165 mm dia. up to 90.00 m depth

Drilling of Bore well by down the hole hammer drilling to a finished dia of 165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion ofcasing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2800 Part I & II 1979 and amended from time to time Drilling of Bore well 163/165 mm dia. above 90.00 m up to 150.00 m depth

Drilling of Bore well by down the hole hammer drilling to a finished dia of 165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion ofcasing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2800 Part I & II 1979 and amended from time to timeDrilling of Bore well 163/165 mm dia. above 150.00 m up to 250.00 m depth

Supply and delivery of 180mm diameter PVC pipes with working pressure of 6 kg/sqcm as casing pipe for borewells confirming to IS Specification No. 4958/1988 with ISI mark.inclusive of CED and Cess

PVC Borecap suitable for 180mm dia PVC pipe used for borewells . The rate exclusive of all taxes.

Supply and delivery of 10HP/ 12-16 Stage submersible pump set as per ISI standards incuding cost and conveyance of all materials and labour charges etc. (Category-1)

Supply & Fixing of Control panel board of approved one with all accessories suitable for up to and including 10.00 HP star Delta Starter 415V, 3 phase, 50Hz..enclosed with no volt coil and overload protection with necessary materials, etc., complete

Supply and fixing of 50 mm GI pipes Class-B

Supply and fixing of 4 Sq.mm finolex cable wire Category-1

Supply and fixing of 180mm MS bore cap

Supply and fixing of 50 mm MS clamp set

Supply and fixing of 7/16 Service wire

Supply and fixing of 50 mm Non return valve GUN Metal

Supply and fixing of 50mm MS Flange set

Supply and fixing of 50 mm GI Bends

Being the labour charges for the erection of submersible pump set with all accessories and running the pump set in good condition etc. complete

Earthwork excavation for Pipe line trenche of size 0.70 x 1.00 mts with 2/3 machinery and 1/3 manual in all soils except rocky soils including lowering laying and jointing of 90 mm dia PVC 6 Kg/Cm2 pipes with required fitting specials true to alingment and gradint refilling with already excavated earth watering tamping and removing surplus earth and testing to required hydraulic test Pressure etc complete excluding cost of specials/fitting for finiished item of work.1 RMT For 90 mm HDPE PE 100 Pipeline 06Kg/cm2 excluding cost pipe

Supply & fixing of 90mm dia HDPE pipe PE 100 6 Kg/Cm2 as per IS:4984/2016

Earthwork excavation for Pipe line trenche of size 0.70 x 1.00 mts with 2/3 machinery and 1/3 manual in all soils except rocky soils including lowering laying and jointing of 75 mm dia PVC 6 Kg/Cm2 pipes with required fitting specials true to alingment and gradint refilling with already excavated earth watering tamping and removing surplus earth and testing to required hydraulic test Pressure etc complete excluding cost of specials/fitting for finiished item of work.1 RMT For75 mm HDPE PE 100 Pipeline 06Kg/cm2 excluding cost pipe

Supply & fixing of 75mm dia HDPE pipe PE 100 6 Kg/Cm2 as per IS:4984/2016