JJM

Drilling of Bore Well with Hand bore set to a finished dia of 112 / 165 / 175 / 180mm jusitfy both sides in all kinds of formattions suitable for hand bore set drilling such as black cotton soils sandy and alluvaial soils and insertion of PVC / PVC blue casing piep with couplings including slotting of pipe where ever required and fixing of bore well with cap and ball plus as per directions of the department for a finished item of work including conducting yield test crew charges cost of consumables transprotation charges and bore development charges and all other charges reuqired in fixation of pipe assembly, slushing of bore with required pressure excluding cost of all required materials such as cap, ball plug, clampsets, bolts and nus etc., excluding all taxes cost of PVC casing pipe, slotting charges

Cost and supply of 175mm dia PVC 6 Kg/Cm2 Pipes

Cost and supply of 175mm dia PVC Dummy Cap

Machine sloting charges

Geological Survey Charges

Supply, delivery and errection of Submersible pump set with single phase Motor 2880 RPM 400V (-15% + 10% Range - 340 to 440V) 50Hz with Class - 'F' insulation, of reputed make with minimum overall efficiency of 75% at the duty point including cost and conveyance of 5.00 HP pump sets

Supply, delivery and fixing of wall mounted industrial type control panel board of size 450x400x150mm made of 18 SWG CRCA sheet steel enclosure 14 SWG mounting plate for cable entry fabricated, painted with two coats of red oxide primier and two coats of final light grey paint, lock and key arrangement two side lovures with weld mesh inside et., complete consisting of the following equipment with all internal wiring using fine cab/finolex cables of suitable size and capacity and cable clamps etc., complete for Control Panel Boards suitable to 5.00 HP Single phase Submersible pump sets

Supply and delivery of 140mm dia HDPE 6 Kg/Cm2 PE-100 Pipes confirming to IS 4984/2016 with amendments & revisions. The rates are inclusive of cost, conveyance to site, loading and unloading charges and as directed by the Engineer-in-Charge including over heads and contractors profit @13.615% excluding GST for pumping mains

Construction of pipe line for Drinking Water Supply with 140mm dia HDPE 6 Kg/Cm2 HDPE PE-100 pipes including lowering, laying and jointing of pipeline as per IS7634-part-II/1975 with its amendments and revisions and as per Technical specifications as per requirements, lowering, laying and jointing of pipe lines with necessary HDPE specials true to alignment and gradient, trench of size 0.70 x 1.00 Mts excavation (Earth work excavation in all soils upto SDR using machine with 2/3rd and manual with 1/3rd) for pipelines in all soils except rock requring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering and tamping and removing surplus earth from site of work and filling the pipeline with water and hydro-testing to the required pressure etc., complete for finished item of work as per the Standard Specifications and as directed by the Department Engineers. The rates are inclusive of all labour charges, HDPE specials etc., complete for finished item of pipeline work, including overheads and contractors profit @13.615% for pumping mains but excluding GST and Seigniorage charges

Construction of OHSR of 1,50,000 Lts capacity with staging of 13.20 Mts with wind pressure of 185.21 Kg/m2 to with raft foundation including 3 coats of epoxy painting to inner surface of the resrvoir including roof slab, including two coats of weather proof emulsion painting for external surfaces, Lettering, fixing of all required fixtures, pipes and bends, Valves for vertical pipe connections as per departmental designs and drawings etc., but excluding cost of pipes and bends, and valves etc., Fixtures are as fallows i.e., (a) RCC or Aluminium ladder inside 0.6M wide (b) Spiral staircase on the outside shall be provided up to 200KL. Above 200KL capacity dog legged staircase shall be provided with staircase flight width of 1.0mts and landing width of 1.20mts with S.S railing up to 1.0 height. (c ) Lightening arrestor, including conductor and earthing etc., (d) RCC Ventilators with copper or stainless steel fly proof mesh (e) RCC Finial ventilators with copper or stainless steel fly proof mesh (f) D.I Manholes frame and cover 0.60x0.60 M with frame as per IS specifications (light duty - 2Nos. (g) Railing provided to the gallery and staircase shll be with Stainless steel of grade 304 for a height of 1.20 mts, (h) Water level indicator of good quality with ebonite / copper float approved pattern -1 No (i) DI Swan neck ventilators shall be provided in top slab excluding cost of pipes bends and valves etc., complete as per departmental designs and drawings with M 30 Grade concrete.for construction of 1,50,000 Lts capacity OHSR including overheads and contractor's profit @ 13.615% but excluding Taxes

Supply and delivery of 160mm dia HDPE 6 Kg/Cm2 PE-100 Pipes confirming to IS 4984/2016 with amendments & revisions. The rates are inclusive of cost, conveyance to site, loading and unloading charges and as directed by the Engineer-in-Charge including over heads and contractors profit @13.615% excluding GST for pumping mains

Supply and delivery of 140mm dia HDPE 6 Kg/Cm2 PE-100 Pipes confirming to IS 4984/2016 with amendments & revisions. The rates are inclusive of cost, conveyance to site, loading and unloading charges and as directed by the Engineer-in-Charge including over heads and contractors profit @13.615% excluding GST for pumping mains

Supply and delivery of 110mm dia HDPE 6 Kg/Cm2 PE-100 Pipes confirming to IS 4984/2016 with amendments & revisions. The rates are inclusive of cost, conveyance to site, loading and unloading charges and as directed by the Engineer-in-Charge including over heads and contractors profit @13.615% excluding GST for pumping mains

Supply and delivery of 90mm dia HDPE 6 Kg/Cm2 PE-100 Pipes confirming to IS 4984/2016 with amendments & revisions. The rates are inclusive of cost, conveyance to site, loading and unloading charges and as directed by the Engineer-in-Charge including over heads and contractors profit @13.615% excluding GST for pumping mains

Supply and delivery of 75mm dia HDPE 6 Kg/Cm2 PE-100 Pipes confirming to IS 4984/2016 with amendments & revisions. The rates are inclusive of cost, conveyance to site, loading and unloading charges and as directed by the Engineer-in-Charge including over heads and contractors profit @13.615% excluding GST for pumping mains

Construction of pipe line for Drinking Water Supply with 160mm dia HDPE 6 Kg/Cm2 HDPE PE-100 pipes including lowering, laying and jointing of pipeline as per IS7634-part-II/1975 with its amendments and revisions and as per Technical specifications as per requirements, lowering, laying and jointing of pipe lines with necessary HDPE specials true to alignment and gradient, trench of size 0.70 x 1.00 Mts excavation (Earth work excavation in all soils upto SDR using machine with 2/3rd and manual with 1/3rd) for pipelines in all soils except rock requring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering and tamping and removing surplus earth from site of work and filling the pipeline with water and hydro-testing to the required pressure etc., complete for finished item of work as per the Standard Specifications and as directed by the Department Engineers. The rates are inclusive of all labour charges, HDPE specials etc., complete for finished item of pipeline work, including overheads and contractors profit @13.615% for pumping mains but excluding GST and Seigniorage charges

Construction of pipe line for Drinking Water Supply with 140mm dia HDPE 6 Kg/Cm2 HDPE PE-100 pipes including lowering, laying and jointing of pipeline as per IS7634-part-II/1975 with its amendments and revisions and as per Technical specifications as per requirements, lowering, laying and jointing of pipe lines with necessary HDPE specials true to alignment and gradient, trench of size 0.70 x 1.00 Mts excavation (Earth work excavation in all soils upto SDR using machine with 2/3rd and manual with 1/3rd) for pipelines in all soils except rock requring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering and tamping and removing surplus earth from site of work and filling the pipeline with water and hydro-testing to the required pressure etc., complete for finished item of work as per the Standard Specifications and as directed by the Department Engineers. The rates are inclusive of all labour charges, HDPE specials etc., complete for finished item of pipeline work, including overheads and contractors profit @13.615% for pumping mains but excluding GST and Seigniorage charges

Construction of pipe line for Drinking Water Supply with 110mm dia HDPE 6 Kg/Cm2 HDPE PE-100 pipes including lowering, laying and jointing of pipeline as per IS7634-part-II/1975 with its amendments and revisions and as per Technical specifications as per requirements, lowering, laying and jointing of pipe lines with necessary HDPE specials true to alignment and gradient, trench of size 0.70 x 1.00 Mts excavation (Earth work excavation in all soils upto SDR using machine with 2/3rd and manual with 1/3rd) for pipelines in all soils except rock requring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering and tamping and removing surplus earth from site of work and filling the pipeline with water and hydro-testing to the required pressure etc., complete for finished item of work as per the Standard Specifications and as directed by the Department Engineers. The rates are inclusive of all labour charges, HDPE specials etc., complete for finished item of pipeline work, including overheads and contractors profit @13.615% for pumping mains but excluding GST and Seigniorage charges

Construction of pipe line for Drinking Water Supply with 90mm dia HDPE 6 Kg/Cm2 HDPE PE-100 pipes including lowering, laying and jointing of pipeline as per IS7634-part-II/1975 with its amendments and revisions and as per Technical specifications as per requirements, lowering, laying and jointing of pipe lines with necessary HDPE specials true to alignment and gradient, trench of size 0.70 x 1.00 Mts excavation (Earth work excavation in all soils upto SDR using machine with 2/3rd and manual with 1/3rd) for pipelines in all soils except rock requring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering and tamping and removing surplus earth from site of work and filling the pipeline with water and hydro-testing to the required pressure etc., complete for finished item of work as per the Standard Specifications and as directed by the Department Engineers. The rates are inclusive of all labour charges, HDPE specials etc., complete for finished item of pipeline work, including overheads and contractors profit @13.615% for pumping mains but excluding GST and Seigniorage charges

Construction of pipe line for Drinking Water Supply with 75mm dia HDPE 6 Kg/Cm2 HDPE PE-100 pipes including lowering, laying and jointing of pipeline as per IS7634-part-II/1975 with its amendments and revisions and as per Technical specifications as per requirements, lowering, laying and jointing of pipe lines with necessary HDPE specials true to alignment and gradient, trench of size 0.70 x 1.00 Mts excavation (Earth work excavation in all soils upto SDR using machine with 2/3rd and manual with 1/3rd) for pipelines in all soils except rock requring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering and tamping and removing surplus earth from site of work and filling the pipeline with water and hydro-testing to the required pressure etc., complete for finished item of work as per the Standard Specifications and as directed by the Department Engineers. The rates are inclusive of all labour charges, HDPE specials etc., complete for finished item of pipeline work, including overheads and contractors profit @13.615% for pumping mains but excluding GST and Seigniorage charges

Construction of Function Hold Tap Connections (FHTC) with supply & fixing of PP Clamp Saddle manufactured by injection moulding (virgin resin of PE-80/PE-100 having blue /black colour using food grade compound raw material with quality assurance cerificate for usage in drinking water system and having working pressure of 10 bar for 75mm dia main with 1/2" service connection) and supply and fixing of required materials such as Non-return cum flow control valve (with all three parts made by using solid steel bars of 316, wth CNC machine make and of 15mm dia designed for 5 LPM discharge @ 0.50 bar pressure loss, not exceeding the flow of 7 LPM at 1 bar pressure and working on float principle as per CPHEO manual), compression fittings (ISO:17885-2015, PN 16 rating and manufactured from virgin resin of PE-80/PE100 having blue colour. Raw material must be as per BS:6920 for effect on water quality, should have moulded in SS 304/Nickel plated brass female threded outlet inserted to connection necessary fitting with threaded dimension conforming to IS 554/1507 which are Compression male/female threaded adaptor (with SS insert D20 mmx 1/2"), Compression male/female threaded elbow (with SS insert D20 mmx 1/2")), including supply, delivery and fixing of 15mm dia B class GI pipe as per IS1239 with necessay GI fittings including 20mm dia HDPE pipe 16.0 Kg/cm2 pipes, earth work of trench excavation up to 0.50m depth), and 12.7mm dia Brass Bib cock long body Indian make heavy duty excluding GST and Seigniorge charges, including contractor' profit & overheads @ 13.615%.