SPL REPAIRS TO WATCH TOWERS (BLDG NO.P-211C, P-211D, P-211E , P-211F) AND PUMP HOUSE P-210A AT NAD BHEEMUNIPATNAM AND SPECIAL REPIARS TO FIRE FIGHTING SYSTEM, STAND POST, HYDRANT VALVES, HOSE BOXES AND ITS CONNECTED ITEMS AT NAVAL STATION BHEEMUNIPAT

Amount

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth; for trench of FRLS cable etc and getting out in Soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in Soft/loose soil complete all as specified and as directed

Removing excavated material to a distance n.exc 50 mtr and depositing where directed at level n.exc 1.5 mtr above the starting point all as specified and as directed

Supply laying ,testing of MS ERW Class "B" of Size 200 MM NB with all necessary fittings i.e. Bend, tees, reducer flange ,structural Support including taking down old unserviceable pipe complete all as Specified and directed by Engr-in-charge. Note:- All piping for firefighting shall be distinctly painted with fire red shade (Colour No. 536) as per IS 5 – 1978 and to be coated with anti-corrosive epoxy resin before laying and any modification required in laying of pipe at site is deemed to be included in the quoted rate.

Supply laying ,testing of MS ERW Class "B" of Size 150 MM NB with all necessary fittings i.e. Bend, tees, reducer flange ,structural Support including taking down old unserviceable pipe complete all as Specified and directed by Engr-in-charge. Note:- All piping for firefighting shall be distinctly painted with fire red shade (Colour No. 536) as per IS 5 – 1978 and to be coated with anti-corrosive epoxy resin before laying and any modification required in laying of pipe at site is deemed to be included in the quoted rate.

Taking down and Supply, Fixing , testing and commissioning Double Flange non rising stem type 200 mm dia sluice of valve cast Iron body and suitable for Pressure rating of PN 1.6 with both ends flanged drilled at both the ends Conforming to IS-780 having gunmetal spindle with iron wheel at top complete with nuts, bolts, washers, rubber gasket champion-20, 3mm thick sheet complete all as specified and directed.

All as per item No. 6.00 here-in-before but 150mm dia.

M&L for 150mm Pipe Support for all types of Pipes including Hangar/Fasteners/ Elbows/Supports/Tees all as specified and directed.

Supply and install fire hydrant stand post single out let type made out of 100mm dia. MS pipe, 2 mtr long, with 90 degree bend, both ends flanged including taking down old unserviceable stand post complete all as specified & directed by Engineer-in-Charge. Note : Any modification like cutting the old stand post and fixing the new size stand post along with welding is deemed to be included in the quoted rate.

Supply and install fire hydrant stand post single out let type made out of 80mm dia. MS pipe, 2 mtr long, with 90 degree bend, both ends flanged including taking down old unserviceable stand post complete all as specified & directed by Engineer-in-Charge. Note : Any modification like cutting the old stand post and fixing the new size stand post along with welding is deemed to be included in the quoted rate.

Supply, fix and install fire hydrant control valve with all accessories made out of gunmetal, single headed outlet type, 63mm dia. confirming to IS complete all as specified & directed by Engineer-in-Charge.

Supply, fix and install fire hydrant control valve made out of gunmetal, double headed outlet type, 63mm dia. confirming to IS complete all as specified & directed by Engineer-in-Charge.

Supply and Install Hose box made of 18 gauge MS Sheet /FRP wall mounted type/Self standing type 800mm X 600mm X 250mm with double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red out side and brilliant white inside yard all as specified and directed by Engineer-in-Charge. Note : Fixing arrangement of the hose box with channels, angles and fabrication work as per site requirement is deemed to be included in the quoted rate.

Supply and install hose reel drum 30m. confirming to IS complete all as specified & directed by Engineer-in-Charge.

Supply and install hose reel of length 30m, dia 63 mm confirming to IS- 636:88 type and BS 6391 type 1 Made of 100% Polyester for extra strength internally black EPDM Coated complete all as specified & directed by Engineer-in-Charge.

M&L for Cutting the Existing MS Pipe Line of dia 150MM and Inserting TEE 150X150X150 mm dia including other accessories as per requirement and Jointing materials including necessary earth work excavation Complete all as specified.

M&L for Boring of holes under road, pavement ,hard standing by trenchless technology using ultra sounding technique and necessary machine including making the disturbed surface good for 200mm dia pipe made up of any material suitable for 0.4 Mpa working pressure all as directed and specified

Demolition of old unserviceable/broken chamber and M&L for construction of brick masonry valve chamber 1200x900x 600mm size with plain cement concrete in 1:4:8 type D2 foundation and 15mm thick plaster in CM 1:4 on brick wall inside and brick chamber built in cement mortar 1:6 including providing of MS Sheet cover 3mm thick with angle iron (40x40x6mm) brackets grouted to brick wall duly painted with two coats of synthetic enamel paint over a coat of red oxide primer with lifting handle and locking arrangement complete all as specified and directed:-

Supply only 80mm NB MS Flange for fixing with the fire hydrant stand post single out let type made out of 80mm dia. MS pipe, 1.50 mtr long, with 90 degree bend, both ends flanged all as specified and directed by Engineer-in-charge.

M&L for joints with rubber or fibre board gasket of 10mm thick for flanged pipe joints for MS/CI/DI pipes confirming to IS using suitable nuts, bolts, & washers as required at site for 80mm dia. pipe complete all as specified & directed by Engineer-in-Charge.

M & L for Plain Cement concrete type B-1, 1:2:4 ( using 20mm graded aggregate) as in subbase of foundation

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames)

Taking down Chowkhats or frames exc. 1.5 sq. m but n exc 4.0 Sqm each with shutters (without taking off shutters from the frames)

Taking down & Refixing shutters of any description exc 1 Sqm and n.exc 2 Sqm each

Demolition of Unreinforced Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises

Demolition of brickwork built in cement mortar

Demolition of reinforced cement concrete chajjas, drops and similar suspended works , including cutting reinforcement to facilitate demolition

Taking down existing water proofing treatment from roof.

M & L for Brushing neat cement slurry with 3.0kg of cement per sq. metre

M & L for Plain Cement concrete 25mm thick type B-0, 1:2:4 (12.5 mm graded aggregate) as in padding/ sub base

M&L for 15mm thick screed bed on concrete surface in cement mortar 1:3 with water proofing compound before carrying out water proofing treatment over roof slab. Note: WPC will be measured and paid separately as supply only

Supply only Integral Water Proofing Compound [ISI marked] of approved make.

M & L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt. not less than 150 gms/sqm) and on primed surface by forced application an applying one coat of bituminous aluminium paint complete all as specified and directed.

M&L Second class hard wood Plain solid straight chowkhats and frames, wrought ,framed, rebated on the solid, rounded or chamfered ,put together with glue pinned at joints, supplied and fixed.

M&L for PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregates as in hold fast block complete.

M & L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius with built in CM 1:6

S&F factory made shutters 35mm thick Plain, framed, panelled shutters of 2nd class hard wood (two panel), with lock rail and panels of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and style as per IS : 1003 (part-I), kiln seasoned chemically pressure treated.

S&F for 35mm thick IInd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc; sizes of me-mbers of shutters as specified in SSR part I, Section 8, clause 8.24 (a);

Material and labour for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer on surfaces of wood of any description over 10 cm in width or girth not other wise described complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet & 5mm thick x 15mm wide PVC sheet beading used inside Stiles and Rails and decorative PVC beading of 10mm x 10mm (90 degree) used instead of exposed portion of PVC sheet beading and the panelling of wood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing

S & F Solid PVC Door Frame of size 100mm x 60mm made out of 5mm WOOD GRAIN printed PVC sheet used instead of plain colour PVC sheet and edges will be painted to match with printed sheet, reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing

S & F 125 mm Butt hinges, Medium weight, cold rolled mild steel, and fixed

S & F of 200mm Aluminium anodised, barrel tower bolts of extruded section and fixed

S & F of 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed

S & F Aluminium handles, cast type, anodised of size 150 mm

S & F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F Powder coated Anodised aluminium frame for windows, doors and ventilators, including jointing cleat for fixing etc complete all as specified

S&F UPVC window,(unplastisized poly-Vinyl Chloride) sliding windows multichambered and stiffened framed windows using 88mm x 52mm size sections all-round as main frames and shutters made with profile sections of size 57mm x 42mm, including the cost and fixing of 5mm thick clear float glass in shutters and stainless steel wire me in mesh shutters shall have well defined welded corner joints without any gaps, fixed the window unit to the existing masonry with anchor fasteners as window unit to the existing masonry with anchor fasteners as required. The shutters shall have necessary handles and other associated fittings to facilitate smooth operation. Both frames and the frames and the shutters shall be reinforced with GI profiles of thickness 1.25mm the entire window is covered with MS power coated tube of size 40mm x 20mm all-round the frame the frame section, 10mm square bars horizontally placed at 120mm and vertically placed 120mm C/C and suitably placed vertically to avoid buckling and providing structural strength, Min weight shall be 10kg/Sqm and fixed to UPVC frames with suitable fasteners. The gaps between the window frames and masonry walls shall be filled with silicon or with any other suitable filler materials. (Make : Rajshri Plastiwood, NCL ALLTECH & SECCOLOR LTD, Duroplast Extrusion Pvt. Ltd,Shreeji Plast Mart and VASTU FURNITURE )

S & F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples

S & F 4.80mm thick plain Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane

M&L for Providing and injecting chemical emulsion for Post constructional anti termite treatment along external wall below concrete apron using chemical emulsion @2.25 Ltrs/linear metre including drilling and plugging holes etc in apron.

M&L for Treatment of soil under existing floor using emulsion @1litre per hole ,300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1cement:2 coarse sand) to match the existing floors.

M&L for providing joint free non skid coloured ceramic tiles 600 x 600 x 7 to 8 mm thick floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick cement screeding in CM (1:6) all as specified

M&L for providing joint free non skid coloured ceramic tiles 600 x 600 x 7 to 8 mm thick in Skirting/Vertical Surface and jointed in neat cement slurry and pointed in white or colour cement to match for joint free over backing of 10 mm thick in CM 1:3 on fair faces of brick work or concrete surfaces complete all as specified and as directed by the Engineer-in-charge.

M & L for Non skid/matt finish ceramic tiles 7 to 8 mm thick of size exc 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat slurry and pointed in white or coloured cement to match for joint free over Screed bed or bedding layer of mortar 15mm of thick CM 1:4 for laying floor finishes

M&L glazed ceramic coloured tiles 300 x 450x 6-7 mm thick as in vertical surface set & jointed in neat cement slurry & pointed with coloured cement to match over 10 mm thick rendering with CM 1:3 all as specified &directed.

Taking up or down 15mm bore, steel tubing and connection including cleaning for refixing or removal from site.

Taking up or down 20mm bore, steel tubing and connection including cleaning for refixing or removal from site.

Taking up or down 25mm bore, steel tubing and connection including cleaning for refixing or removal from site.

S & F 20 mm outer dia, 3-layer PP-R P o l y p r o p y l e n e random copolymer) for concealed pipes SDR 7.4 (PN - 16) UV stabilised and a n t i m i c r o b i a l fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc.

S & F 25 mm outer dia, 3-layer PP-R P o l y p r o p y l e n e random copolymer) for concealed pipes SDR 7.4 (PN - 16) UV stabilised and a n t i m i c r o b i a l fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc.

S & F 32 mm outer dia, 3-layer PP-R P o l y p r o p y l e n e random copolymer) for concealed pipes SDR 7.4 (PN - 16) UV stabilised and a n t i m i c r o b i a l fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc.

S&F in repairs, vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, low level flushing cistern 10 ltr capacity and flush pipe and seat cover etc. complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair wash hand basin of size 550x400 vitreous China (flat back or angle back type) including half pedestal and cutting for and pinning in ends of brackets or erecting stand including supply and fixing of waste coupling, waste pipe etc. complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, PVC flexible connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs Tubular towel rail, 20mm dia, Brass Chromium plated , 20mm dia., 60cm long between flanges complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs soap dish, chromium plated brass, of approximate size 160x160x90mm, fixed to plugs with chromium plated brass screws complete all as specified and as directed by the Engineer-in-Charge.

S&F 40mm dia. PVC waste pipes for WHB/sink fixed to walls including fittings and connecting to multiple floor trap complete all as specified and as directed by the Engineer-in-Charge.

S&F 50mm dia. PVC waste pipes for WHB/sink fixed to walls including fittings and connecting to multiple floor trap complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC (SWR) pipes 110mm dia. single docketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC (SWR) pipes 75mm dia. single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by the Engineer-in-Charge.

S&F 110mm dia. PVC (SWR) plain bends any radius complete all as specified and directed by the Engineer-in-Charge.

S&F 75mm dia. PVC (SWR) plain bends any radius complete all as specified and directed by the Engineer-in-Charge.

S&F 110mm dia. PVC (SWR) bends any radius provided with access door complete all as specified and directed by the Engineer-in-Charge.

S&F 75mm dia. PVC (SWR) bends any radius provided with access door complete all as specified and directed by the Engineer-in-Charge.

S&F 110mm dia. PVC (SWR) junction single (Single T) equal or unequal provided with access door complete all as specified and directed by the Engineer-in-Charge.

S&F 75mm dia. PVC (SWR) junction single (Single T) equal or unequal provided with access door complete all as specified and directed by the Engineer-in-Charge.

S&F PVC (SWR) vent cowls 110mm dia. complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC (SWR) multi floor trap 75mm dia. outlet with grating including jointing with solvent cement complete all as specified and directed by the Engineer-in-Charge.

M&L Repair to Beam/Chajja/drop/facia, (Broken/damage) Making good with PCC 1;2:4 type B1 or cement mortar 1:3, Rendering 15mm thick with using water proofing compound, sides and soffits in cement mortar 1:4 including necessary form work wherever damaged, including re-inforcement duly welded if required including demolition of broken/loose PCC or taking down old plaster height up to 8M.

S&F in repairs, PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed by the Engineer-in-Charge.

S&F grating doom 125mm dia. with waste hole of PTMT (Min weight 40 gms) complete all as specified and as directed by the Engineer-in-Charge.

M&L 100 mm Cast iron Nahani trap grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair 15mm dia. chromium plated with long shank and cup stop valves (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by the Engineer-in-Charge.

S & F in repairs Brass chromium plated shower rose 125mm size

S & F in repairs Bib taps 15mm dia Fancy type Chromium Plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

S & F in repairs two way bib cock, CP, Fancy type - 15mm dia

S & F in repairs 15mm bore dia Pillar taps Fancy type, chromium plated, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S & F in repairs 15mm bore dia Stop valves fancy type Chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S & F Health Faucet for 15mm dia with 1.5m long easy flex tube in Chrome finish and wall look

M&L for TMT bars of 8mm dia and cut to length bent to shape required incl cranking ,bending and binding with and incl mild steel wire annealed not less than 0.9mm dia complete

M&L for 75mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection , pavement surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for 50mm thick PCC type B1, 1:2:4 (20mm graded stone aggregate) in floors finished even and smooth without using extra cement with WPC.

Taking down cement plastering on brick or concrete wall ,including raking out joints, hacking for key, scrubbing down with water etc

M&L for rendering cement plaster 15 mm thick on fair faces wall in CM 1:4 finished even and smooth without using extra cement.

M&L for 10 mm thick rendering on Internal plaster of brick work or concrete surfaces in cement mortar 1:6 complete all as specified and directed

M&L for rendering cement plaster 5 mm thick on fair faces of ceiling in CM 1:3 finished fair and even without using extra cement.

M & L for preparation of new surface of walls and applying two coats of Exterior emulsion over a coat of primer for external surface on walls complete all as specified and as directed by the Engineer-in-Charge.

M&L Preparation of new plastered wall surfaces and applying two coats of plastic emulsion paint over priming paint including applying 3mm thick wall care putty .

M&L for preparation of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed by the Engineer-in-Charge.

M&L for complete removal of existing treatment on walls and applying two coats of Weather Proof Paint complete all as specified and as directed.

M & L for preparation of old surfaces and applying three coats of white wash on Ceiling

M&L Complete removal of existing treatment on wall and applying two coats of plastic emulsion paint over priming paint complete all as specified and as directed.

Dismantling water tanks capacity exc 250 Ltrs but not exc 500 Ltrs and removing to store

S & F 500 litres Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed

S & F 2000 litres Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed

M&L for preparation of old painted steel and Iron surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for 100mm thick PCC 1:2:4 type B1 (Using 20mm graded stone aggregate) as in floors and finishing the surface of concrete by brooming complete all as specified and as directed by the Engineer-in-Charge.

Taking down carefully existing aluminium conductor point wiring (light / fan / socket or power point) complete, with all fittings such as switches, socket, regulator, ceiling rose, utility light fittings and lamp holders etc and removing materials from site and making good the disturbed surfaces of walls roof and floor etc as per existing specification complete all as specified and as directed.

Taking down carefully by unscrewing from boards / outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and fan regulators etc. for reuse at site complete all as specified and as directed. (Note : To be measured only when found serviceable in all respects complete for reuse)

Material and labour for point wiring for one light controlled by 1 one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn carefully through existing/New concealed conduit along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and including new pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for mounting switches, sockets, fan regulators etc including testing on completion complete including making good disturbed surface all as specified and as directed.

All as per Item no 113 here-in-before but for one fan point controlled by 1 one way switch and regulator all as specified and as directed.

All as per Item no 113 here-in-before but for one E/Fan point controlled by 1 one way switch and regulator all as specified and as directed.

All as per Item no 113 above but for one 3 pin switch socket outlet, 5 Amp on independent board all as specified and as directed.

All as per Item no 113 here-in-before but for one switch socket outlet, 5 Amp on same board with other switches all as specified and as directed

All as per Item no 113 here-in-before but for one16 Amp 3 & 5 pin switch socket outlet, independent with 4.0 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 4.0 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire all as specified and as directed.

M & L for XLPE insulated GI wire/strip armoured electric power cable (Heavy duty) ISI mark with stranded aluminium conductor 1100 Volts grade, cross sectional area 25 Sqmm 3.5 Core laid in trenches/poles/ on wall all as specified and as directed.

Supply and fixing socket combination 2 in 1 3 pin 5 and 15 amp flush type universal all as specified and as directed.

Supply and fixing switch piano flush button single pole one way 5 amps all as specified and as directed.

Fixing only switch flush button single pole one way 5 amp all as specified and as directed. (Material obtained from item No 112 here in before shall be used)

S&F switch flush type, single pole Two way 5 Amps 230 volts all as specified and as directed.

Supply and fixing socket combination 2 in 1 3 pin 5 amp flush type universal all as specified and as directed.

Fixing only switch socket outlet 5 amp flush type all as specified and as directed. (Material obtained from item No 112 here in before shall be used)

Supply and fixing ceiling rose surface bakelite three terminals all as specified and as directed.

Fixing only ceiling rose surface bakelite three terminals all as specified and as directed. (Material obtained from item No 112 here in before shall be used)

Supply and fixing fan regulator electronic deluxe rotary step type all as specified and as directed.

Fixing only fan regulator any type all as specified and as directed. (Material obtained from item No 112 here in before shall be used)

Supply and fixing sheet metal enclosure for MCB, DBs, phosphatised, Powder coated , Triple Pole and Neutral (TPN), suitable for 4 way, Double door 415 Volts all as specified and as directed .

Supply and fixing sheet metal enclosure for MCB, DBs, phosphatised, Powder coated , single pole and neutral (SPN) 240 Volt , double door, suitable for 8 way with din rail earth and neutral bar all as specified and as directed.

Supply and fixing MCB Four Pole (FP) C curve 10kA breaking capacity of 63 amps, 415 Volts in proper position all as specified and as directed.

Supply and fixing MCB Single Pole (SP) C curve 10kA breaking capacity of 6 to 32 amps, 240 Volts in proper position all as specified and as directed.

S&F in proper position MCB Double Pole of capacity up to 40 amps, 240 Volts c-series with 10kA breaking capacity all as specified and as directed.

Supply and fixing indoor luminaire decorative batten for wall/ceiling mounting box type Extruded aluminium housing ,PC Diffuser, energy efficient saving LED BATTEN LIGHT 20W,230 V,50 HZ, slim integrated design easy install incl twin twisted copper conductor flexible wire from ceiling rose to connector all as specified and as directed.

Supply and fixing LED mirror light fittings 07 W,230 V,50 HZ suitable for indoor and outdoor applications complete all as specified and as directed.

Supply and fixing LED bulk head fittings 10 W,230 V,50 HZ suitable for indoor and outdoor applications complete all as specified and as directed. Make Surya Cat no SLE BH 10 W or equivalent as approved by GE

Supply and fixing on wall security LED light luminaire fitting 1X25 W and including cable for connection from celling rose with 1.5 Sqmm PVC insulated stranded copper conductor (FRLS) cable including 25 mm GI bracket medium grade 1m long bent to shape including bolt, nut,washer,clamp etc all as specified and as directed by the Engineer-in-charge.

Taking down carefully ceiling fan any sweep and any make after disconnecting the electrical connection, dismantling the blades and removing fan incl blades for safe custody for reuse and re-assembling the fan complete and refixing the fan in same position including all electrical connection all as specified and as directed.

Material and labour for taking out and removing burnt copper winding, cleaning the armature, rewinding the fan armature for 1200mm sweep fan with new super enamelled copper wire of existing gauge including supply and fixing necessary insulating materials etc and varnishing with approved grade of insulation varnish and heating up and testing all as specified and as directed.

Supply only bearing No.6201/6202 for ceiling /Exhaust fan

Supply only fan condensor upto 2.5 mfd

Material and labour for painting of ceiling fans complete of any sweep/make with one coat of first quality synthetic enamel paint of approved tint by spray including preparation of old painted surface and removing all dust, oil mark etc and filling cavities with filler materials, and writing serial / MES number as specified (with paint of black colour with each letters/figures in Block of height n.exc2 cm ) complete all as specified and as directed.

S&F Exhaust fan wall mount type 300 mm sweep metal body , single phase with louver shutter and connecting up including provision of hold fasts for fixing fan and louver shutter with cutting of hole and necessary PCC(1:3:6) all as specified and as directed.

S&F Exhaust fan wall mount type 250 mm sweep PVC body , single phase with louver shutter and connecting up including provision of hold fasts for fixing fan and louver shutter with cutting of hole and necessary PCC(1:3:6) all as specified and as directed.

Material and labour for sand cushioning for protection of underground FRLS cable consolidated and compacted with clean dry sand all as specified and as directed (Compacted thickness shall only be measured and paid)

Supply and lay bricks common burnt clay building bricks sub-class B of size 230x113x75 complete all as directed by Engr-in-Charge.

Drilling of hole horizontally 80/40 mm dia bellow the road, pavement, hardstading by trenchless technology using ultra sounding technique and necessary arrangements for protection of water supply line by using necessary machine as directed by Engr-in-Charge

Material and labour for galvanized iron tubing 50 mm bore light grade with all fitting for protection of XLPE cable, laid in trenches/wall/floor incl necessary clamp, bolt/nut if any all as specified and as directed. Note: Excavation ,earth work shall be measured and paid separately

Material and labour for sub main wiring with two single core PVC insulated un-sheathed cable with multi-stranded copper conductor of 4.0 sq mm size and drawing into and including concealed PVC conduit of 25 mm dia with earthing cable of PVC insulated un-sheathed stranded copper conductor of size 4.0 sqmm, single core, as earth continuity wire all as specified and as directed. (NOTE: 3 runs of 4.0 Sqmm cable and one run of PVC concealed conduit 25mm dia will be measured as one unit i.e. RM)

M&L for Earthing complete with 3 m CI pipe 80 mm dia with flanged ends, centrifugally cast, class A, in any length, joints with suitable stainless steel nuts and bolts and sufficient slot up to 2.5mtrs length buried directly and preferably vertically in ground with top flanged ended 2.5mtrs below ground label welded/connected with GI strip 32×6mm size on the top edge of the flange to bottom edge of the flanged for earthing including filling the pit with charcoal common salt surrounding the earth pipe including drilling 400 mm dia bore in any strata of soil to lower the CI pipe complete including necessary excavation and earth work PCC (1:3:6) type C-1 with 50 mm thick pre cast RCC (1:2:4) type B-1 cover slab and necessary testing on completion complete all as specified and as directed.

Supply and fixing LED flood lights 100 W for area lighting applications made with single piece pressure die-case aluminium housing with dedicated heat sink and toughened glass, LED surrounded with aluminium reflector for better light distribution and control, IP-65 degree of protection & impact resistance of IK 07 and integrated driver with 5KV inbuilt surge protection all as specified and directed by Engineer-in-Charge

LAKSHMI SAI CONSTRUCTIONS

UV POWER TECH

THE VENKATESWARA SUPPLIERS

P SRINIVASA RAO

F AND M TECHNOLOGIES