Nagar Palika Parishad Bahraich Ke Karyala Bhavan Ke Peechhe Karyalay Ka Nirman Karya

Excavation in Foundation As Per DSR 2.6

Sand Filling in Foundation and plinth DSR 2.27

1:4:8 (1 cement:4 fine sand derived from natural sources:8 grade stone aggregate 40 mm nominal derived from natural sources.DSR 4:1:8

Brick work with common burnt clay F.P.S(non modular )bricks of class designation 7.5 in foundation and plinth in 1:6 (1 cement: 6 coarse sand) dsr 6.1.2

Brick work with common burnt clay F.P.S(non modular) bricks of class designation 7.5 in super structure above plinth level up to floor V level in all shapes and size in 1:6 (1 cement: 6 coarse sand) dsr 6.4.2

Excavating, supplying stacking and filling of the local earth (including royality )by machanical transport upto a lead of 5 km.dsr 2.25(a)

Providing and laying in postion cement concrete 1:1.5:3 (1 cement:1.5 corse sand derived from the natural sources:3 graded stone aggregate 20 mm nominal derived from natural sources) dsr 5.1.2

RCC Work in wall (any thickness), including attached pilasters butteresses, plinth and string courses, fillets, columns,pillars, piers etc 1:1.5:3 (1 cement:1.5 coarse sand and 20 mm nominal size derived from natural sources).dsr5.2.2

RCC Work in wall (any thickness), including attached pilasters butteresses,plinth and string courses, fillets,columns,pillars,piers etc 1:1.5:3 (1 cement:1.5 coarse sand and 20 mm nominal size derived from natural sources).dsr5.2.2

RCC work in beam,suspended floors, roofs having slope upto 15% landing,balconies, shelves, chajjas, lintels,band with 1:1.5:3 mix etc complete.dsr 5.3

mild steel or iron in plane work such as reinforced concrete si dsr 5.22A.4

12 mm thick Plaster 1:6 Cement & Fine Sand dsr 13.1.2

Providing and applying plaster of paris putty of 2 mm thikness over plastered surface to prepare the suface even and smooth complete DSR:13.26

Finishing of wall textured exterior paint of required shade dsr 13.45.1

Providing and Laying vitrified floor tiles in different size(thickness to be specified by the manufacturer) with 20 mm thick cement mortar 1:4 cement and c sand including grouting the joints etc complete.dsr 11:41:2

Proviaing and fixing ist quallty ceramic giazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. DSR 8.31

ANTITERMITE TREATMENT dsr2.34.1+2.35.1

Providing and Fixing 1 mm thick m.s.sheet garrage door with frame 40x40x6 mm angle iron with fitting all complete si dsr 10.5.1

Centering shuttering including strutting, propping etc and removal from for dsr no 5.9.5

Centering shuttering including strutting,propping etc and removal form for dsr 5.9.1

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.as required.DSR NO ELE 2022 1.2

Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 120 mm nominal dio Dinoe DSD:18 8.3

Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 100 mm nominal dja nines DSR 18.9.9

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface boх 100х100 x75 mm (inside) with hinged cover fixed in reinforced cement concrete slab 1:1.5:3 mix (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design: With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 DSR18.32.1

Providing and Fixing water closer squatting pan 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.11 White Vitreous china Orissa pattern W.C. pan of size 580x440mm with intearnal type foot rest DSR 17.1.1

Providing and Fixing white vireous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.l. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and laid DSR 17.2.1

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass sinale hole basin mixer -DSR:17 7A a

Cistern with fittings for Waterless Urinal each dsr 7075

Providing and tixing rectangular high density polyethylene water storage tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support Including fittings & fixtures for tank shall be paid separately DSR NO 18 48A

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to |S standards and weighing not less than 810 gms. 15 mm nominal bore DSR: 18.50.1

S/F of exist fan in toilet

S/F of sign board