MAINTENANCE / REPAIRS TO TP FURNITURE AND REPAIRS TO SOFA SET, BED HARD, STEEL BED AND REPLACEMENT OF PLYWOOD TO BED AT AFS BIDAR

Amount

SOFA SET 4/5 SEATER FD-281: Removing of worn out upholstery & U Foam and S&F new U- foam cushion (ISI Marked) 40 Density of size as per Drg including long cloth lining inside and new tapestry cloth cover as per sample and shade as approved by Engr-in-Charge in consultation with users duly stitched and provided with nylon zip complete all as specified and as directed. Note :- (i) The cost of tapestry cloth shall not be less than Rs 250/- per metre. (ii) Each cushion with tapestry cover shall be measured and paid as one unit.

Removing the existing broken/damaged arms of sofa and S&F new arm of existing size and shape, made out of well seasoned first class teak wood including polishing to glossy finish, etc complete all as specifed and as directed . Note:-(i) Each arm will be measured and paid as one unit. (ii) Tightening of sofa frame wherever required shall be deemed to be included in the rate quoted.

Removing the existing broken/damaged leg of sofa and S&F new leg of existing size and shape, made out of well seasoned first class teak wood including polishing to glossy finish, etc complete all as specifed and as directed . Note:-(i)Each leg will be measured and paid as one unit. (ii)Tightening of sofa frame wherever required shall be deemed to be included in the rate quoted.

Removing the existing broken/damaged battens and S&F new battens of sofa of existing size and shape, made out of well seasoned first class teak wood including polishing to glossy finish, etc complete all as specifed and as directed . Note:-(i)Each batten will be measured and paid as one unit. (ii) Tightening of sofa frame wherever required shall be deemed to be included in the rate quoted.

Prepare the existing surface of wooden furniture of any description by applying sand paper, removing the stains and filling the bore holes, cracks by putting bees wax and chalk powder etc, and apply french polish with rose wood/ walnut colour stainer to the exposed surface and polishing shall be uniform and shall be glossy finish for sofa set FD-281 complete all as specifed and as directed .

Removing of worn out tapestry cloth and M&L new tapestry cloth cover as per sample and shade as approved by Engr-in-Charge in consultation with users duly stitched and provided with nylon zip complete all as specified and as directed. Note :- (i) The cost of tapestry cloth shall not be less than Rs 250/- per metre.

CHAIR REVOLVING EXECUTIVE HIGH BACK MAKE GODREJ SERIES(PCH-7001): Removing the unserviceable worn out cloth tapestry and moulded cushion, of seat & back and S&F new moulded cushion of Density 30 with tapestry cloth as per existing and shade as approved by Engr-in-Charge complete all as specified and as directed. Note:- (i) Cost of tapestry cloth shall not less than Rs 250.00 Per mtr. (ii) Each chair (seat and back) measured as single unit

Removing the unserviceable and worn out gas lift/hydraulic assembly system and S&F new gas lift/hydraulic assembly system to match the original complete all as specified and as directed.

Removing the unserviceable/broken Pedestal assembly and S &F new Pedestal assembly to match the original complete all as specified and as directed.

Removing the existing broken castor wheel from chair revolving and S&F new castor wheels to match the original complete all as specified and as directed.

Removing the /broken arm rest from chair revolving and S&F new arm rest as approved to match the original complete all as specified and as directed.

CHAIR REVOLVING MEDIUM/LOW BACK MAKE GODREJ SERIES(PCH-7001, 7022 R, 6001 R, 6002 R, 5001 D) : Removing the unserviceable worn out cloth tapestry and moulded cushion, of seat & back and S&F new moulded cushion of Density 30 with tapestry cloth as per existing and shade as approved by Engr-in-Charge complete all as specified and as directed. Note:- (i) Cost of tapestry cloth shall not less than Rs 250.00 Per mtr. (ii) Each chair (seat and back) measured as single unit

Removing the unserviceable and worn out gas lift/hydraulic assembly system and S&F new gas lift/hydraulic assembly system to match the original complete all as specified and as directed.

Removing the unserviceable/broken Pedestal assembly and S&F new pedestal assembly to match the original complete all as specified and as directed.

Removing the existing broken castor wheel from chair revolving and S&F new castor wheels to match the original complete all as specified and as directed.

Removing the /broken arm rest from chair revolving and S&F new arm rest as approved to match the original complete all as specified and as directed.

CHAIR STEEL PADDED WITH ARMS 7003 D: Removing the unserviceable worn out cloth tapestry and moulded cushion, of seat & back and S&F new moulded cushion of Density 30 with tapestry cloth as per existing and shade as approved by Engr-in-Charge complete all as specified and as directed. Note:- (i) Cost of tapestry cloth shall not less than Rs 250.00 Per mtr. (ii) Each chair (seat and back) measured as single unit

Removing the / broken arm rest from chair steel padded and S&F new arm rest as approved to match the original complete all as specified and as directed.

Removing the rusted leg and S&F new MS tube of size 35mm square, 1.6mm thick duly welded including preparing the new steel surfaces and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

TABLE COMPUTER MAKE GODREJ COMPANION C-3 : Removing unserviceable/ worn out components of Table Top and S&F 18 mm thick pre-laminated particle board, exterior grade,both side lamination, (Shade as that of component removed) including all cut ends of laminated sheet to be sealed by laminated beading as required along with appropriate new screws , 'L' clamps as per the existing complete all as specified and as directed.

All as per item No. 20.00 here in before but sides of table.

All as per item No. 20.00 here in before but key board of table.

All as per item No.20.00 here in before but bottom of table.

All as per item No.20.00 here in before but drawer of table.

Removing unserviceable /worn out castor wheel and S&F new castor wheel with appropriate screws etc. to match the original complete all as specified and as directed.

Removing unserviceable /worn out MS telescopic channel of key board & drawer and S&F new MS telescopic channel with appropriate screws complete all as specified and as directed.

Removing unserviceable /worn out lock from the drawer of table and S&Fnew brass lock to match the original complete all as specified and as directed.

GI CHARPOY FD-220: Removing existing unserviceable long rail of charpoy, GI pipe carefully with out disturbing parts and S&F new long rail including tightening the joints, placing every part in-tact as applicable as per Drg No. - FD- 220. complete all as specified and as directed.

All as per item No. 28.00 here in before but labour only for short rail GI pipe and short rail converted out of long rails obtained from Sl No 28.00 above.

All as per item No. 28.00 here in before but labour only for Leg GI pipe and leg converted out of long / short rails obtained from Sl No 28.00 and 29.00

All as per item No. 28.00 here in before but MS check nut

All as per item No.28.00 here in before but 3 way elbow.

Removing the existing unservieable plywood top from GI charpoy and tighting of the frame of GI Charpoy and S&F 12mm thick ply wood commercial BWR grade duly ISI marked conforming to IS-303 and of size as per drg and rounded edges on four corners and fixed with GI bolts and nuts 6mm dia 50 mm long with 3mm thick washers complete all as specified and as directed.

BED HARD (STEEL) WITHOUT MNF(FD/E6/MAP/08(R): Removing dents & bends and welding wherever required and scrapping old painted surfaces by removing existing paint with chemical / aerosal spray including preparion of surfaces and applying putty and red oxide primer and spray painting with two coats of synthetic enamel paint of colour black complete all as specified and as directed. Note :- Bed Hard (Steel) as a whole shall be measured as single unit.

Removing existing unserviceable plywood and S&F 12 mm thick commercial plywood BWR grade and with ISI mark conforming to IS 303 for Bed Hard(Steel) of size as per drawing complete all as specified and as directed.

CHARPOY FOR ORs (Drg CWE/AF/61/11) : Removing dents & bends and welding wherever required and scrapping old painted surfaces by removing existing paint with chemical / aerosal spray including preparion of surfaces and applying putty and red oxide primer and spray painting with two coats of synthetic enamel paint of colour black complete all as specified and as directed. Note :-Bed Hard (Steel) as a whole shall be measured as single unit.

Removing existing unserviceable plywood and S&F 12 mm thick commercial plywood BWR grade and with ISI mark conforming to IS 303 for Bed Hard(Steel) of size as per drawing complete all as specified and as directed.

CHAIR CB STEEL WITH ARMS FD 75(M) : Removing the existing unserviceable seat & back from chair and S& F new moulded cushion of size 75mm for seat and 50 mm for back of Density 30 and tapestry cloth (quality and shade as approved ) including welding of 04 Nos MS Flat Angle (02 each on seat and 02 each on back ) as directed. Seat and back supported by 6mm thick commercial plywood BWR Grade ISI marked (Beneath cushion) and fixed with GI bolts and nuts 6 mm dia 45 mm long with washers 3mm thick duly drilled 8 holes per chair and spray painting with two coats of synthetic enamel paint of colour Black over red oxide primer including scrapping old painted surfaces and removing existing paint on surfaces with chemical /aerosal spray and applying putty and S&F of new PVC moulded arms (02 arms) for each chair including removing existing Arms complete all as specified and as directed. Note:- (i) Each chair (seat & back) shall be measured as one unit.

BED PLYWOOD TOP :- FD-246/247. Removing the unserviceable ply wood from bed top, tighten the frame, S&F 12mm thick ply wood BWR grade duly ISI Marked etc., complete all as shown on drawing and as directed.

Removing unserviceable long rail, S&F long rail made out of seasoned First class hard wood (teak), made to shape as shown on drg, complete all as specified and as directed. Note:- Each long rail shall be measured as one unit.

Removing existing damaged head board from bed and S&F new head board complete all as shown on drg and as directed. Note:- Each head board shall be measured as one unit.

Removing existing damaged foot board from bed and S&F new foot board complete all as shown on drg and as directed. Note:- Each foot board shall be measured as one unit.

Preparing the wooden surface by applying sand paper removing the stains and filling the bore holes, cracks by applying Bees wax and chalk powder etc, and applying french polish to all faces, applied uniformly, glossy finish for Bed ply top, Drg No. FD- 246/247 etc complete all as specified and as directed.

BALAJISTEELINDUSTRIES

PAVAN ENTERPRISES

famous construction