Karnataka

Financial Eval

Works

Dam and Allied works

Providing protection work to Upstream Part of the Dam Bund & Improvements to Existing Ayacut Road Connecting Left Flank with Mangala Dam on the Right Flank

Cauvery Neeravari Nigam Limited

CNNL HC Div Yediyur | Tumakuru, Karnataka

Amount: ₹2.9 CrCloses: 4 Apr 2026Closed

Timeline

Published24 Mar 2026
Closed4 Apr 2026
Financial Evaluation—
Award—

Bids

1 Bid4 Apr 2026

#	Company	Amount	Status
1	JAYALAKSHMI ENGINEERING AND CONTRACTORS ₹3.2 Craccepted-finance	₹3.2 Cr	accepted-finance

Tender Value

₹2.9 Cr

EMD Value

₹4.3 L

Closing Date

4 Apr 2026, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Cauvery Neeravari Nigam Limited

Contact Person

S T SREENIVASA

Office Number

Mobile Number

Work Description

Improvement to Mangala Dam

Tender Information

Tender ID

CNNL/2025-26/DA/WORK_INDENT4351

Reference Number

CNNL/2025-26/DA/WORK_INDENT4351

Tender Type

Open

Product Category

Dam and Allied works

Form of Contract

Two Tender Document System(Two Cover)

Location

CNNL HC Div Yediyur

Source Website

Subscribe to view

Documents Required

11 documents required · 11 mandatory

Technical Bid

RequiredClass-II Contractors Registered under KPWD along with, should have super grade Electrical Contractor License /tieup with Super grade Electrical contrctor

RequiredGST REGISTRACTION CERTIFICATE

RequiredAnnual Turnover Certificate

RequiredSIGNED BID CAPACITY CALCULATION

RequiredITR Files

RequiredAudited Balance sheets mentioning UDI Number

RequiredWork done Certificate with similar nature of work

RequiredWorkdone certificate along with quantities mentioned

RequiredLine of credit

RequiredBE Certificate

RequiredOther required documents as per notification

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The tenders should be submitted in two-documents through KPPP.a) Electronic tender Document I (Technical Bid) shall contain the following documents.b)A copy of certificate of registration issued by KPWD as prescribed.

The requisite earnest money deposit (EMD) through online only with validity of 135 days from the date of closing of the tender. Earnest money deposit (EMD) can also be submitted as per circular no: FD5 Exp-12/2023 dt: 10.02.2023 in the form of eBank guarantee.

The Intending bidders / tenderers are advised to visit the site of work and also access the tender documents well in advance

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection

Conditional tenders will not be accepted.

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs.

The TENDER PROCEESING FEE will not be refunded

The employer is not responsible for any delay in accessing Karnataka Public Procurement Portal.

All the formats prescribed in the bid document shall be filled by the bidders in a complete manner. Incomplete formats may constitute sufficient reason at the discretion of CNNL for rejection of the bid.

All scanned documents to be uploaded shall be in original and the Executive Engineer will verify the original documents at any stage before recommending for approval. Bidders should produce their original documents for verification during office hours related to uploaded documents in Karnataka public procurement portal immediately after opening of technical Bid.

Further particulars, if any, required by the bidders can be asked from the office of the Executive Engineer, H.C. Division, Yediyur during office hours on all working days. It may be noted that if any of the calendar of any event mentioned above happen to be General Holiday / Declared holiday, the next working day holds good for the respective events.

The bid validity will be 90 days from date of closing of tenders

The intending bidders should note that, if any of the lands (either in part/parts or in whole) required for the work is not yet acquired by the Nigama, it shall be the responsibility of the successful bidder to take possession of such land by consent of the owners before commencement of the work at no extra cost to the Nigam and no claims whatsoever relating to non-availability of land would be entertained.

Defect liability period will be 03 years for Work from the date of completion of entire work

Tenderers shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by the Government of Karnataka.

The Tenderer should furnish the Name of the individual / firm/ Company with address and telephone number with place of registration, year of incorporation etc

The application made by the firm / company shall be signed by a person holding the power of attorney, in which case the Tenderer should furnish a copy of power of attorney signed by the board of directors in Karnataka Public portal along with their bid

The scanned signature of the bidders / authorized representatives of the bidders shall be attached while uploading the Bid document.

Necessary certificates should be signed by an officer not below the rank of the Executive Engineer or equivalent competent authority

The intending Bidder/firm/company should furnish list of man power available with him for taking up above work.

The intending Bidder/firm/company shall provide accurate information on the related form about any litigation or Arbitration resulting from contracts completed or ongoing under its execution over the last five years. The consisting history of awards against the tenderer may result in failure of the application

Tenderer should furnish a copy of the Income Tax Return for the preceding five financial year (2020-21 to 2024-25)

The intending Bidder/firm/company shall provide the audited balance sheets or other financial statements acceptable to the employer for the last five years (2020-21 to 2024-25) and must demonstrate the current soundness of the applicants financial position and indicate its prospective long-term profitability. If deemed necessary the employer shall have the authority to make enquiries with the applicants bankers.

The Tenderer should furnish a valid copy of Valid GST Registration Certificate along with updated GST clearance copies

Royalty Recovery from the contractors bill will be made as per Government Circular Dt:-24-1-2025 & further any Orders/Circulars issued by Government of Karnataka from time to time.

The bidders should follow the instructions issued in the circular Dated:07/11/2023 of the Mines and Geology department regarding procurement of material from the licensed mines contractor. Any violation in this regard action will be taken as per the circular.

The rates quoted by the contractor must be EXCLUDING GST. The contractor is also required to pay quarry Fees, Royalties, Dues levied by the state Government or any Local body or an authority and ground rent, if any, charged by the Executive Engineer for stacking materials. No Extra Payment on this account will be made to the contractor.

GST will be deducted as per the prevailing Government Orders from time to time

Increase in GST shall not be paid in extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time.

Materials required for the work shall be procured by the Contractor themselves and should get the same tested by the quality control authority of CNNL before use in this work.

The work includes all lead and lift / work shall be carried out as per instruction of engineer-in-charge of the work. And all the specification as per Indian road congress and all relevant Indian codes. The rate for the specifications in the Schedule-B includes all lead and lift, irrespective of distance and height. No extra claim will be entertained for additional lead and lifts

The intending bidder/firm/Company is advised to inspect the site in detail before participating in the tender.

Performance security-1.Within 20 days of receipt of the letter of acceptance, successful tenderer shall deliver to the employer a security deposit for an amount equivalent to 5.00% of the contract price & additional performance security for unbalanced tenders if quoted below in accordance with the clause 29.1 of ITT and clause 43 of the conditions of the contract. 2.The successful bidder should execute work agreement within 20 days from the date of issue of Letter of Acceptance, failing which his tender will be cancelled & EMD will be forfeited.3.FSD can also be submitted as per GO: FD-12/2023 Dated :15-05-2023.As per circular No. FD5Expenditure-12-2023 Dt:15.05.2023, the requisite Security Deposit can also be submitted in the form e-Bank Guarantee

Security Deposit will be released after the completion of the defect liability period

Building and other construction workers welfare cess: The contractor shall subscribe 1.00% of gross amount of each bill payable to him in respect of contract to the building and other construction workers welfare cess as per GO No: LD 300 LET 2006, Bangalore, dated: 18-01-2007. The amount of subscription will be recovered out of payable amount to him in each bill. This component is deemed to have been included in the quoted rate / Item rate

Successful Bidder should submit the PERT Chart at the time of Execution of Agreement & should adhere to the accepted program submitted by him under any circumstances without linking to the pending payment of the work.

Tendering by the joint venture will not be permitted.

Sub leasing /subcontracting in any form is prohibited. Bids of bidders with track record of Sub leasing/subcontracting are liable for rejection

The intending bidders shall visit the site, identify the quarries, ascertain availability for the quantity and quality of the materials required for the work and shall quote his rates accordingly. No extra claim whatsoever will be entertained in this regard.

All precautions should be taken by the contractor so that there are no damages to such public/private properties& to avoid any damage to the utilities during excavation as well as utility shifting.

Contractor should follow strictly the prevailing rules of labour act

Contractor should adhere to HSE (Health Safety Environment) policy applicable for similar projects.

Contractor to that extent should submit HSE document defining all the procedure including the policies before execution of the project.

Contractor should take all precautions to ensure that no damage is caused to the existing structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost.

The intending bidders should inspect & get confirm regarding availability of materials and has to make own arrangements to get the construction materials. There are no extra claims will be entertained from Nigam.

Uploading of NSIC Certificate or Other certificate for relaxation of EMD Payment is not accepted as per government Order Dated 26.03.2019

CNNL reserves the right of rejecting all or any of the tenders without assigning any reasons.

Typo graphical errors if any will not be the ground for any claims by the contractor.

Tenders shall remain valid for a period not less than ninety days after the deadline date for tender submission & earnest money deposit for the tender shall be valid for 45 days beyond the validity of the tender

The undersigned reserves the right to either postpone or to cancel the entire process of tender

As per Government order No: DPAR154e-Gov2024Dated:23/07/2024 contract management module has to be mandatorily followed by the contractor.

Tenders from Joint ventures are not acceptable

Related to qualification condition No. 3.3 (a), idle charges for men & machineries for non-progress period delayed due to any reasons will not be paid.

Contractors should mandatorily submit insurance copy as per clause -13 of conditions of contract and as detailed in contract data prior to commencing of the work.

Technical Criteria

General

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Past Experience

Valid GST registration certificate should be uploaded

GST Registration

The intending bidder satisfactorily completed (at least 90% of the contract value), as a prime contractor, at least one similar type of work of Improvements/Development Works to dam / MI Tanks for value of 144.00 lakhs (Excluding GST) last five years 2020-21 to 2024-25. An additional weightage of 10% each year will be added to the cost of the work done to bring it to the 2025-26 price level. The certificates should be obtained from the competent authority that is not below the rank of the Executive Engineer or equivalent rank officer, (The cost of completed works of previous years will be given a weightage of 10% per year to bring them to 2025-26 level rupee price value).

Work Done Certificate

Capabilities of Vendor

The bidder / firm/ company should furnish details of liquid assets availability or availability of credit facilities of value 172.00 lakhs in the form of credit lines / letter of credit /certificate from any Nationalized Banks/ Scheduled banks for meeting the fund requirement etc., in the specified format mentioned in the bid document as per FD circular No: FD CMM/16/2022 (P-2) Dt: 22.08.2022, mentioned in the bid document. Failing with which tender will be liable for rejection.

Line of Credit

Class-II Contractors Registered under KPWD along with, should have super grade Electrical Contractor License /tieup with Super grade Electrical contrctor

PWD Registration Certificate (Class I/II/III/IV)

The intending bidder/firm/company should have executed in any financial year from 2020-21 to 2024-25, the following minimum quantities of work in the last five years. For which certificate should be obtained from the competent authority (yearwise quantities executed certificates in proforma mentioned in bid document should be scanned and enclosed) Earth work Excavation/ Embankment -2448.00 Cum, Cement Concrete of all grades PCC/RCC-1242.00 Cum GSB/WMM -1291.00 Cum, Reinforcement Steel -33.00 Tonne 100 KVA Transformer 11Kv/433V substation-1 No. Structural steel -8923.00 Kgs and 11KV Line-5 Kms.

Work Done Certificate

Not Applicable

Others -- others

Financial Status

Audited balance sheets & Turnover certificate for the preceding 5 years (2020-21 to 2024-25) mentioning UDIN number should be uploaded

Audited CA Certificate of Annual Turnover

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2020-21, 2021-22, 2022-23, 2023-24 and 2024-25(a) Achieved in at least 2 financial years a minimum financial turnover (in all classes of civil engineering construction works only) of value not less than the two times the amount put to tender as 574.00 LAKHS (Excluding gst).

Audited CA Certificate of Annual Turnover

Income tax returns for the year 2020-21 to 2024-25

ITR Filed Copy (Mentioning PAN)

Others

Details of Technical personnel employed by the Tenderer who are suitable for both design and execution of work and number of technical personnel who will be deployed EXCLUSIVELY for these works with B.E. (civil)/equivalent graduate engineer with degree certificate should be uploaded.B.E (Civil) Engineering Graduate with minimum 3 years experience - 1 No.

Others -- B.E (Civil) Engineering Graduate with minimum 3 years experience - 1 No.

Tenderers who meet the above specified minimum qualifying criteria will only be qualified if their available tender capacity is more than the total tender value.The available tender capacity will be calculated as under-Assessed available tender capacity A X N X 1.5 - B Where A-Maximum value of works executed in any one year during the last five years considering the completed as well as works in progress. (Updated to 2025-26 price level) N -Number of years prescribed for completion of the works for which tenders are invited 5 months, B Value, at 2025-26 price level, of existing Commitments and ongoing works to be completed during the next 5 months. (Period of completion of the works for which tenders are invited)

Others -- Signed Tender capacity calculation

Work Locations

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹4.3 L

Important Dates

Last Activity

4 Apr 2026

Published

24 Mar 2026

Bid Opening

6 Apr 2026

Download Ends

30 Mar 2026

Pre-Bid Meeting

1 Apr 2026

BOQ Preview

•

Providing protection work to Upstream Part of the Dam Bund & Improvements to Existing Ayacut Road Connecting Left Flank with Mangala Dam on the Right Flank

•

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P andscaffolding wherever nece...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Substructure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. Th...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works,Water works, Irrigation works & super structure works of bridges upto 3.50 m height. Thegranite/trap/...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing and fixing 100 x 50 mm 10 gauge non-galvanized weld mesh to concrete / masonry surface including cost of all materials, machinery, labour, fixing weld mesh to exposed reinforcement bars or b...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired complete as per specificatio...

•

Providing and fixing 200 x 200 x 750 mm roughly dressed boundary / demarcation / chainage/ arrow stones including cost of all materials,labour, engraving marks, excavating pit, fixing in position, mur...

•

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

•

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...

•

Providing and laying Hariyala or other approved quality turfing sods for the slopes of earthen embankments over 20 mm thick sand backing including cost of all materials, machinery,labour including pre...

•

Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead. complete as per specif...

•

Construction of unlined surface drains of average crosssectional area 0.40 m2 in soil to specified lines,grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3m ...

•

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...

•

Granular Sub-Base - Plant Mix Method Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in ...

•

Wet Mix Macadam (Plant Mix Method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical ...

•

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over aprepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), co...

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...

•

Providing and laying flooring with burnt stone slabs 10 cms thick rough chistle dressed on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3, , including cost of materials, mortar...

•

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

RCC Pole - 9 Mtr Long, 145 kg WL complete as per specifications and as per directions of the Engineer-in- Charge.

•

RCC/PSCCPoleBaseConcreting.For11/9.5/9/8MPole

•

(500x650x150 mm) complete as per specifications and as per directions of the Engineer-in- Charge.

•

CopingforPoles. 150mmaroundpole foranheightof

•

300 mm for RCC/PSCC Pole (400x400x300 mm) complete as per specifications and as per directions of the Engineer-in- Charge.

•

Double Pole TC Set for erection of Transformer on

•

RCC/PSCC 9 Mtr Long Poles as per IS-1977. For 25/63/100 kVA 4/5 Star Rated Transformer on RCC Pole 9 Mtr Long,...

•

11 kV, 200 Amps, Single Break GOS. complete as per specifications and as per directions of the Engineer-in- Charge.

•

H-Frame for mounting GOS. complete as per specifications and as per directions of the Engineer-in- Charge.

•

100 kva transformer 11 or 433 v. complete as per specifications and as per directions of the Engineer-in- Charge.

•

9 kV, 5 kA Lightning Arrester Metal Oxide Ceramic type with GROUND DISCONNECTOR. complete as per specifications and as per directions of the Engineer-in- Charge.

•

11 kV, HG Fuse Unit with Solid Core Insulator.complete as per specifications and as per directions of the Engineer-in- Charge.

•

LT Distribution Box for 100 KVA DTC with MCCB'S (Sheet Metal). complete as per specifications and as per directions of the Engineer-in- Charge.

•

LT Metering Box with CT's & necessary wiring for

•

housing ETV meter. complete as per specifications and as per directions of the Engineer-in- Charge.

•

LT Electronic Tri-vector Meter 5A.complete as per specifications and as per directions of the Engineer-in- Charge.

•

GSM Modem. complete as per specifications and as per directions of the Engineer-in- Charge.

•

1.1 kV Class HR (Heat Resistance) PVC Insulated & Sheathed Aluminium Single core Lead wires as per IS -

•

694 : 2010 / 120 sq.mm. complete as per specifications and as per direc...

•

Rabbit ACSR conductor . complete as per specifications and as per directions of the Engineer-in- Charge.

•

GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg. complete as per specifications and as per...

•

Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each. complete as per specifications and as per directions of the Enginee...

•

Good Quality Salt for grounding purposes packed in 50 Kg gunny bag. complete as per specifications and as per directions of the Engineer-in- Charge.

•

7/10 SWG Guy Wire for grounding & guy sets (7/3.251

•

mm dia), Std Wt: 680 Kg/KM. complete as per specifications and as per directions of the Engineer-in- Charge.

•

8 SWG GI Wire for grounding & guy sets (4.064 mm dia),

•

Std Wt: 131 Kg/KM. complete as per specifications and as per directions of the Engineer-in- Charge.

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC

•

exutruted Inner Seath Armoured LTUG Cable as per IS- 1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistiv...

•

Meter Protection/Tamper Proof Box (MS) for LT Installations 25 HP and above Meter Protection/Tamper Proof box with busbar for LT 3 Ph with CT Ratio 50/5A, 1.0 Accuracy Class. comple...

•

Providing and supplying lighting control switch . complete as per specifications and as per directions of the Engineer-in- Charge.

•

Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base pla...

•

Supply of LED pole mounting type post top lantern with pressure die cast aluminium housing body for optimal thermal dissipation. L...

•

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. complete as per specifications ...

•

Top access street light with single screw to ensure ease of maintenance at the sight site location with mini mized minimal tools. LED Light fixture with W System Power consumpt...

•

Pole mounted street light with solar panel. complete as per specifications and as per directions of the Engineer-in- Charge.

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper ...

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC

•

exutruted Inner Seath Armoured LTUG Cable as per IS- 1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistiv...

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC

•

exutruted Inner Seath Armoured LTUG Cable as per IS- 1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistiv...

•

Supplying heavy gauge PVC Conduit Pipe dia

•

....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wal...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-37...

•

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and ...

•

Supplying, installing, testing and commissioning of Diesel Generator set with following specifications. Power rating as per standard reference condition ...

•

Supply, Erection, testing and commissioning of AMF panel suitable for .....kVA DG set. The panel is of cubical type base/floor mounting control ...

•

Pre-Stressed Tubular Spun Pole - 11 Mtr Long, 500 Kg WL. complete as per specifications and as directed by Engineer-in- Charge.

•

PSCC Pole - 9 Mtr Long, 200 Kg WL. complete as per specifications and as directed by Engineer-in- Charge.

•

Pole concreting(without coping) for 11mtr spun pole(1000x1000x2500mm). complete as per specifications and as directed by Engineer-in- Charge.

•

LT 4 pin cross arms complete set. complete as per specifications and as directed by Engineer-in- Charge.

•

11 kv 5kN Polymeric pin insulator. complete as per specifications and as directed by Engineer-in- Charge.

•

Guy set with 1 nos 15 strain insulator. complete as per specifications and as directed by Engineer-in- Charge.

•

Rabbit ACSR conductor +1.5% sag. complete as per specifications and as directed by Engineer-in- Charge.

•

conductor Accessories @ 3% of above. complete as per specifications and as directed by Engineer-in- Charge.

•

R & R of Rabbit ACSR conductor. complete as per specifications and as directed by Engineer-in- Charge.

•

R & R of 11 kv Horizontal cross arm. complete as per specifications and as directed by Engineer-in- Charge.

•

R & r of LT 4 pin cross arms. complete as per specifications and as directed by Engineer-in- Charge.

•

R & R of 9 mtr PSCC DP transformer structure. complete as per specifications and as directed by Engineer-in- Charge.

•

R & R GOS set. complete as per specifications and as directed by Engineer-in- Charge.

•

R & R PSCC poles 1.9%. complete as per specifications and as directed by Engineer-in- Charge.

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW 4 BID Doc I No 4351.doc

Tender Document • 3.18 MB

Notification 21.docx

Instructions to Tenderers • 0.36 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

JAYALAKSHMI ENGINEERING AND CONTRACTORS

₹3.2 Craccepted-finance