Repair to leakage, seepage, joinery, flooring, ceiling, sanitary fittings, plastering, painting, approach path, drain and internal electrification etc of Old MH under GE Dehradun.

Amount

S&F in repair powder coated aluminium anodised door with frame and shutter, and glazing 5.0 mm thick tinted glass and 12 mm thick prelaminated particle board exerior grade in bottom panel, rubber gasket, aluminium glazing clips, mortice lock, aluminium stopper cleat, iron mongary, section of aluminium door, including taking down existing door shall be of following sizes: - Top :- 85x44.5x1.20 mm thick fixed with rawal plug width;- 85x44.5x1.20 mm thick Bottom;- 112x44.5x1.20 mm thick Style;- 85x44.5x1.20 mm thick Glazing beading;- 0.70 mm thick Aluminium handle 'D' type :- 150mm Aluminium tower bold 9.9 mm dia shoot 200 mm long Brass mortice lock- 100 mm 4 lever Aluminium stopper cleat Aluminium hinges 100 mm long Note:- (i) Making good of wall surface with matching to existing surface complete all as specified ad directed (ii) PCC shall be measured and paid seperatelly

S&F powder coated aluminium window double shutter with frame and shutter and glazing wire gauge, rubber gasket, aluminium glazing clips, aluminium peg stay, iron mongary etc including taking down complete all as specified and directed. aluminium sections shall be given below: - Frame;- 85x44.5x1.20 mm thick fixed with rawal plug Style;- 44.5x44.5x1.20 mm thick Glazing beading;- 0.70 mm thick Aluminium handle 'D' type ;- 100mm Aluminium tower bold 9.9 mm dia shoot 150 mm long Glass;- 5 mm thick frosted/ plain glass ( as specified) wire mesh Stainless steel of 0.063 mm nominal dia wire and average width of arperture 1.40 mm Aluminium stopper cleat aluminium hinges 100 mm long powder coated

Taking down chowkats or frame n.exe 1.5 sqm each without taking off shutter from the frame complete all as specified and directed.

Taking down chowkats of any description exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame).

S&F 2nd class hardwood Plain, solid, straight Chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together withglue pinned at joints complete complete all as specified and directed.

M&L 35mm thick 2nd class hard wood factory made Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. without sash bar edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) complete all as specified.

S&F 30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified. Make : ECHON/Rajshree/Sintex

S&F factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed by Engr-in-Charge. Make : ECHON/Rajshree/Sintex

S&F in repairs 18 to 20 mm thick solid WPC board for cupboard shutters with one side 1 mm thick printed PVC sheet other side plain PVC sheet including suitable PVC frame as per specification and drawing complete all as specified and directed.

S&F in repairs 6 mm thick solid PVC board for cupboard /shelves with one side laminated & other side plain PVC sheet complete all as specified and directed.

Taking down door shutter of any description exc. 2 sqm each complete all as specified and directed .

M&L for 30 mm thick, factory made flush shutters, BWR,solid core construction, with block board core and plywood face, pannels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed.

S&F 100 mm size stainless steel butt hinges and fixed with stainless steel screws, complete all as specified and directed by Engr-in-Charge.

S&F 200 mm long, solid in one piece stainless steel barrel tower bolts of extruded section 10mm dia shoot complete all as specified and directed by Engr-in-charge.

S&F 150 mm long, solid in one piece stainless steel barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm size solid in one piece stainless steel handles, all in 304 grade and fixed in stainless steel screwsall as directed complete all as specified and directed by Engr-in-Charge.

S&F 100 mm size solid in one piece stainless steel handles,all in 304 grade and fixed in stainless steel screws all as directed complete all as specified and directed by Engr-in-Charge.

S&F magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F stainless steel sliding door bolts 204 grade, with bright bolt not less than 16mm dia with and incl a minimum of 6 bolts and nuts, and fixed 250mm long complete all as specified and directed.

S&F floor door stopper of stainless steel double legged and tongue, 304 grade anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm. complete all as specified and directed.

S & F 300 mm mild steel, ordinary rat tail rod pattern spring welded to steel/fixed to wooden door frame including roller and roller plate complete all as specified and directed.

M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down Aluminium window shutter size n.exc 1 Sqm including opening up of the corner junctions and replacement of defective members (matching with existing material) alongwith necessary cleats, butt hinges and refixing in the same opening to make the window functional complete all a specified and directed. (Note :- Butt hinges and anodised aluminium section shall be measured and paid seperately)

Taking down Aluminium door shutter size exc 1 Sqm but n.exc 2 Sqm including opening up of the corner junctions and replacement of defective members (matching with existing material) alongwith necessary cleats, pivots, locks and refixing in the same opening to make the door functional complete all as specified and directed. (Note : - Butt hinge ,Pivot, locks and anodised aluminium section shall be measured and paid seperately)

Taking down Aluminium door shutter size exc 2 Sqm including opening up of the corner junctions and replacement of defective members (matching with existing material) alongwith necessary cleats, pivots and refixing in the same opening to make the door functional complete all as specified and directed. (Note : - Butt hinge, Pivot, Floor spring and anodised aluminium section shall be measured and paid seperately)

Hacking out old broken glass (any thickness), size quality or description from any type of frames complete all as specified and directed

S&F 4.8 mm thick sheet glass, ordinary quality and glazing with silicon sealent in square n.exc 0.50sqm each pane complete all as specified and directed.

S&F in repairs glazing (5.00 mm thick float glass) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket and aluminium snap beading etc. complete all as direted by engineer-in-charge . (Note : - Existing snap beading and EPDM gasket shall be reused. Extra aluminium snap beading and EPDM rubber/ neoprene gasket if required shall be paid and measured seperately)

Supply only anodised aluminium snap beading.

Supply only EPDM rubber/ neoprene gasket.

S & F in repair powder coated aluminium grill of size 75x75x4-5 mm thick size fixed with aluminium frame including taking down old grill complete all as specified and directed

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and making good to floor to match with existing floor complete all as specified and directed by engr-in charge.

M&L Framed work as in door or gate angle or other section prepared for handing and sliding with and including hooks and hinges and steel gate doors fittings Fe-410-W. E-250 quality 'B' .including dismantling the existing door/ gate complete all as specified and directed

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old sheet complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/ridge to wall, fixed with self tapping screws including dismantling old sheet as specified and directed

S & F mild steel work as in main and cross beam, hip and jack rafters, purlins etc. fixed with angle cleat or other connecting plate complete confirming to Fe – 410-O or Fe – 310-O including dismantling old section complete all as specified and as directed.

M&L for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer. complete all as specified and directed

S&F in repair factory made steel window with side hung shutters with box type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F in repair factory made steel window with side hung shutters with box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F in repair of steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

S&F in repairs powder coated aluminium anodised partition with frame, fixed type shutter, and glazing 4.8 mm thick retro reflected glass, and 12mm thick prelaminated particle board interior grade in bottom panell, glass fixed with rubber gasket with aluminium glazing clips of following sizes;- Frame of vertical/horizontal section;- 44.5x44.5x1.22 mm thick Bottuom section;-112x44.5x1.22 mm thick Complete all as specified and directed by the Engr in charge

S&F in repair aluminium (extruded section) Door closer hydraulically regulated, designation No.1 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed with stainless steel screw complete all as specified and directed.

S & F in repair Continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30 mm complete all as specified and directed.

S & F in repair Hasp and staple 100mm safety type, stainless steel 304 grade with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repair 1mm wall thickness stainless steel 202 Gde drapery rod with incl brackets, decorative finials at both ends & complete all as specified and directed. (Note : Sample/ design approved by Engineer-in-charge)

Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors including taking up or down existing pipe complete all as specified and directed.

Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors including taking up or down existing pipe complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4 type B-1 (using 20mm graded stone agg) for sub base to receive the screed including demolition complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (using 40mm graded stone aggreate), 75 mm thick as in plinth protection, finishing the surface even & fair without using extra cement the plinth protection shall be laid in alternate bays n exe 2 Sqm, 10mm joints shall be provided, joints shall be filled with bitumen mastic, bitumen mastic comprise of 1 Part of Hot bitumen 85/25 grade and 3 parts of sand all by weight complete all as specified & directed.

M&L Glazed ceramic tiles coloured size of size 200 x 300 x 6 to 7mm , as on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white cement to match on and including 15 mm thick rendering in CM 1:4 for receiving tiles as in backing and including dismantling of tiles complete all as specified and directed

M&L non skid ceramic coloured tiles (300x 300mm) x 7 to 8mm thick as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile on and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 and including dismantling of tiles complete all as specified and directed

M & L for Non skid ceramic coloured tiles (square / rectangular) of 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exc. 0.18sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile on and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 and including dismantling of tiles complete all as specified and directed

M & L for Vitrified Ceramic tiles light shade polished (square / rectangular) of 10mm thick, area of each tile n.exc exceeding 0.36 sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile on and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 and including dismantling of tiles complete all as specified and directed

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and as directed by the Engr-in-Charge.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for 60 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and no pigment including demolition complete all as specified and as directed by the Engr-in-Charge.Make;- NTC, Tulip.

M & L for coloured prepolished rubber moulded chequred cement concrete tile 30 cm x 30 cm x 20 to 22 mm thick with 3 mm spacer bar, set, jointed and pointed in neat cement slurry as in floor with grey cement and filling joints with colour pigment over and including 20 mm thick screed bed in cement mortar 1:6 including demolition of old tiles complete.complete all as specified and directed.

M & L for 20 - 25 mm thick machine cut Kota stone slab as in flooring over 15 mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed.

M & L for 20 - 25 mm thick machine cut Kota stone slab as in risers of steps, skirting, dado and pillar over 15 mm thick rendering in CM 1:4 , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed.

M&L 20 mm thick granite ( of any type) (table rubbed and polished ) in steps, jambs,pillars, window-cills, cooking plateform, and like in ceme t mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M & L for use and waste of formwork to soffits of RCC Shelves and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.

M & L for use and waste of formwork to edges of RCC Shelves or similar work thickness exc. 05 cm and not exc. 10 cm in rough finished surfaces of concrete complete all as specified and directed.

M&L RCC 1:2:4 type B-1 (using 20 mm graded stone agg) as in slab and shelves supported on walls including demolition complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc.complete all as specified and directed.

M&L brick work with sub class ‘B’ bricks straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) complete all as specified and directed.

M&L brick work with sub class ’B’ bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.

Taking down of cement or cement lime plaster any description from brick or stone wall , ceiling etc. including raking out of joints, hacking for key, scrubbing down with water etc.complete all as specified and directed.

Removing / cutting trees vegetation, digging out roots from concrete or brick wall, filling holes on building wall / roof / chajja etc applying and making good with epoxy mortar (Asian/Berger) and applying surface treatment to match with existing specifications complete.

M & L rendering 15mm thick in patches n exc 3 Sqm in cement mortar 1:4 mixed with water proofing compound of cement finished fair faces of brick/concrete surfaces of wall, even and fair without using extra cement complete all as specified and directed. WPC will be measured and paid separately.

M&L rendering 15 mm thick cement plaster in CM 1:6 on brick & concrete surfaces and finished even and smooth (without using extra cement) all as specified and directed.

M & L rendering 15mm thick in cement mortar 1:4 mixed with water proofing compound, finished fair faces of brick/concrete surfaces even and fair without using extra cement . WPC will be measured and paid separately.

M&L 10 mm thick ceiling plaster in CM (1:4) on fair faces of concrete surfaces complete all as specified and directed.

Supply only liquid water proofing compound Dr. Fixit / Fosroc complete all as specified and directed.

M&L, preparation of new plastered/un plastered surfaces and providing two coats of cement base paint as in walls complete all as specified and directed.

M&L for two coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

M&L for preparation of wall and applying interior grade wall care putty 2 to 3mm thick to make the surface smooth as specified and directed by Engr-in-Charge.

M&L for preparation of wall and applying exterior grade wall care putty 2 to 3mm thick to make the surface smooth as specified and directed by Engr-in-Charge.

M&L for preparation of old decorated surfaces and applying one coat of white wash on surfaces of ceiling complete all as specified and directed by Egnr-in-Charge.

M&L for preparation of old decorated surfaces and applying one coat of white wash on surfaces of walls complete all as specified and directed by Egnr-in-Charge.

M&L one coat of oil bound distemper in any tint on walls complete including preparation of old decorated surfaces of walls (plastered) by brooming down with core wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and finally clean with sand paper all as directed by Engr-in-Charge.

M&L one coat of cement base paint on external wall surfaces including preparation of old decorated surfaces of walls (plastered) by brooming down with core wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and finally clean with sand paper all as directed by Engr-in-Charge.

M&L two coat oil bound distemper any tint over a coat of primer on walls including complete removal of existing treatment from wall upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper all as directed by Engr-in-charge.

M&L two coat of cement base paint on external wall surfaces including complete removal of existing treatment from wall upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper all as directed by Engr-in-charge.

M & L preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of Synthetic enamel Paint complete all as specified and directed.

M & L preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as speciied and directed.

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets any thickness incl cover fillets. complete all as specified and directed.

S & F false ceiling at all hieghts with semi perforated 12 mm thick micro tegular edged GRC ( Glass Fibre Rienforceed Gypsum) false ceiling tiles of size 595x595 mm of approved texture, design and patterns , having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225;1987, non combustible as per BS 476 (part4)-1970 and light code description unit rate no. 429 SUB HEAD; 26.0 NEW TECHNOLOGIES AND MATERIALS reflactance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanised @ 120 grams per Sqm including both sides) comprising of main- T of size 15x32 mm of length 3000 mm. cross -T of size 15x32 mm of length 1200mm and secondary intermediate cross -T of size 15x32 mm of length 600 mm to form grid module of size 600x600mm, suspended from cieling using galvanised mild steel items ( galvanizing @ 80 grams per sqm) i.e. 50mm long, 8 mm outer diameter M-6 dash fasteners , 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2mm. galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm center to center to center and 40mm long dry wall wood scres. the work shall be carried out as per specifications, drawing and as per direction of Engineer-in-charge

S& F 4 mm thick 'E' board (Classic ) in false ceiling including & fixing of frame work made of special section MS sheet glavanised with zine coating , cellular nitro painting & consisting of angle cleats of size 25 mm wide, 1.60 mm thick with flange fixing to the ceiling with dash fastener 12.5 mmx40 mm long or with 4 mm dia GI wire or fixed with nails or bolts in GI channel 45x14x0.90 mm runner at 600 mm c/c including fixing of E boad with ceiling section & perimeter of angle 25x25x0.50 mm thick all a specified and directed ..

S&F in Solid PVC Wall Lining consisting of 5mm thick of wood grains PVC sheet inclusive of solvent cement and fixing to walls on PVC frame as per specifications and drawing complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

Cutting chases for concealed water tubing and making good in CM 1:3 on brick wall cutting n.exe 10 cm in girth complete all as specified and directed.

S&F Rotational moulded polyethylene(triple layer white) water storage tanks 500 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of water tank and remove from site complete all as specified and directed.

S&F Rotational moulded polyethylene (triple layer white) water storage tanks 1000 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of water tank and remove from site.

Supply and fixing in repair PVC connection 15 mm dia 45 cm long with brass fly nut at both ends complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including cantilever brackets of suitable angle iron,CP brass waste coupling ,superior quality PVC waste pipe and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including single trap spun casted 60 cm long fix in eposy mortar connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and directed.

S&F in reapair 75 mm cast iron floor trap, spun casted with grating including jointing to waste pipe fixed in cement concrete type B1 (1;2;4) complete all as specified and as directed by the Engr-in-Charge.

S & F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including 32 mm dia PVC pipe 600 mm long complete complete all as specified and directed. Make : Hindware/Parryware/Jaquar.

S&F in repair looking mirror 450x600MM mounted on decorative type PVC frame fixed with PVC rawl plug with CP brackets screw fixed, complete all as specified and directed. Make : Hindware/Parryware/Jaquar.

S&F in repair 550x400mm Wash basin, vitreous China (Flat back ) including fixing and pinning in ends of brackets including pop up brass waste coupling or requisite size and waste pipe for bottle trap complete all as specified and directed . Make : Cera/Jaquare/Parryware

S&F in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

S&F in repair brass chromium plated ovehead shower with shower arm complete all as specified and directed. Make : - Parryware Cat Part No T9985A1(Shower) & T-9999A1(Arm)/Hindware Cat Part No F160054 (Shower) & F190016(Arm)/Jaquar Cat Part No OHS 1999 (Shower) & SHA479L300 (Arm).

S & F in repair 15 mm dia bore chromium plated concealed stop cock, complete all as specified and directed. Make :Jaquar/Hindware/Parryware

S&F in repair 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. Make : - JAGUAR Cat Part No FON-40053/Hindware Cat Part No F160017/Parryware

S&F in repair 15mm bore Bib taps short body, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make : - JAGUAR CAT Part No ALI-85037/Hindweare CAT Part No F-370004/ Parryware

S&F in repair soap dish, brass, chromium plated,100X100X60mm, fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed. Make : Jaquar/Hindware/Parryware

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf with chromium plated guard and railing size 500X125mm with brass bracket complete all as specified and directed. Make : Jaquar/Hindware/Parryware

S&F in repair plate rack 90 x 75 x 20 cm made out off 1.00 mm thick stainless steel grade 304 complete all as specified and as directed.

S & F in repair Stainless Steel grating square 150 mm size complete all as specified. Make : Prayag Cat No. FT-77 or equivalent.

S&F in repair Stainless steel cockroach Trap square of size (101X101 mm) complete all as specified and directed Make : Prayag Cat No. FT 21 or equivalent.

S&F in repairs brass chromium plated towel rail, 20mm dia 'D' type 60cm long between flanges complete all as specified and directed. Make : Jaquar/Hindware/Parryware

M&L cleaning of water storage tank 500 Ltr capacity mechanically using pressure pump with disinfectant chemical including cleaning & removing all scale & dirt etc from existing tanks, mouths of circulating pipes and outer surface of any description & washing down complete all as specified and directed.

S&F in repairs 20 mm dia ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed all as specified and directed.

S&F in repair of Vitreous china wash down water closet pan (pedestal pattern) (cascade) , white including flushing cistern, Plastic water closet seat, white, closed pattern with flat bottom, and cover etc complete all as specified and directed by Engineer in Charge.Make : - JAGUAR bearing CAT Part No FLS-WHT-5351SN/ Hindware CAT Part No 92098 P-21 including trap (P or S type) Parryware Cat Part No VERVE10269

S&F in repair vitreous China wash down (EWC) water closet white pan (pedestal pattern), white (excluding flushing cistern and flush pipe) but including seat and cover for pedestal pattern complete all as specfied and directed. Make : Jaquar/Hindware/Parryware

S&F in repair half stall china urinals (wall type) complete incl plugs, bedding urinal to plugs with and incl 60 mm long screws, pointing around urinal back in cement and waste pipe etc complete all as specified and directed by Engineer in Charge. Make : - Jaquar/URS-WHT-13261 size 340 x 310 x 660 mm/Hindware vinenzia Cat Part No 60023 Stan white pastel size 31.5 x 34.5 x 66 cm/Parryware Cat Part No Aquaseal and neutral size 360 x 345 x 565

Supply and fix 32 mm dia waste fittings, brass chromium plated for Glazedware sink, WHB, etc with long screwed shanks and flynuts, flange embedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repair bib taps long body, brass, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore complete all as specified and directed. Make : Jaquar CAT part no.ALI-85037/Hindware CAT part no. F-370004/ Parryware.

S&F in repair 15mm dia chromium plated brass sink mixer with swivel spout (wall mounted) or mixing hot and cold water, screwed down for 15mm bore GI pipe complete all as specified & directed.Make : Jaquar CAT part no.CQT-CHR23309B/Hindware CAT part no. F280020CP/Parryware CAT part no. G3335A1

S & F in repair 15 mm dia CP brass Wall mixer with provision of over head shower complete with 115 mm long bend pipe, connecting legs & wall flange complete all as specified and directed. Make : Jaquar CAT part no. CON-CHR-281 KN/Hindware CAT part no. F280018 CP/Parryware CAT part no.G4017 A

S & F in repair 15 mm dia CP brass centre hole basin mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed.Make : Jaquar CAT part no. SOL-6001B/Hindware CAT part no. F450009/Parryware CAT part no. G0665A1.

S&F in repair CP brass angle cock 15 mm bore complete all as specified and directed . Make : - Jaquar CAT part no. CON-CHR-053KN/Hindware CAT part no. F200007 CP/Parryware CAT part no. G0253 A1.

S&F in repair CP shower rose with or without swivel joints of 125 mm size complete all as specified and directed .Make : Jaquar CAT part no.HSH-CHR 1937/HindwareCAT part no. F160004 CP/Parryware

S&F in repair CP Health Faucet with 1.20 mtr metalic expandable tube & hook complete all as specified and directed. Make :Parryware CAT part no. T9941A1/ Hindware CAT part no. F160013/ Jaguar CAT part no,.ALD-573

S&F in repair Jet spray (L-Band) with 1 mtr expandable tube & hook complete all as specified and directed. Make : Prayag Cat No.BEA-18 or equivalent of Jaquar/ Hindware/ Parryware.

S&F in repair Plastic Water Closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.Make : Jaquar/Hindware/Parryware

S & F in repair toilet paper holder, chromium plated fixed to wall with chromium plated brass screws and rawl plugs complete all as specified and directed. Make : Jaquar/Hindware/Parryware

S & F in repair Towel rack long of stainless steel grade 304 complete all as specified and directed. Make : parryware (T6008A1) or equivalent of Jaquar/ cera

Supply in repair PVC waste pipe flexible type 32 mm dia with coupler complete all as specified and directed .

Demolition and breaking up drain pipes(PVC, AC or reinforced concrete) 100/75 mm bore set in cement mortar complete all as specified and directed.

S&F in repair PVC (SWR) pipe 75 mm bore,4kgf/cm2 single socketed, in any length with rubber ring joints and fixed to walls complete all as specified and directed.

S&F in repiar PVC (SWR) pipe 110 mm bore,4kgf/cm2 single socketed, in any length with rubber ring joints and fixed to walls complete all as specified and directed.

S&F in repiar PVC (SWR) pipe 75 mm bore,4kgf/cm2 single socketed, in any length with rubber ring joints laid in trenches complete all as specified and directed.

S&F in repiar PVC (SWR) pipe 110 mm bore,4kgf/cm2 single socketed, in any length with rubber ring joints laid in trenches complete all as specified and directed.

S & F UPVC (SWR) bend, 75 mm bore complete all as specified and directed.

S&F 75 mm PVC (SWR) junction single (single 'T') equal or unequal with access door complete all as specified and directed.

S&F UPVC (SWR) bends of 110 mm dia complete all as specified and directed.

S&F 110 mm PVC (SWR) junction single (single 'T') equal or unequal with access door complete all as specified and directed.

S&F UPVC (SWR) vent cowl 75 mm bore complete all as specified and directed.

S&F UPVC (SWR) vent cowl 110 mm bore complete all as specified and directed.

S&F in repairs for 75/100mm bore dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof

M&L for water proofing treatment on roof slab including picking, sweeping clean and washing down with water to remove dust & providing water proofing treatment described as under:- (a) Surface preparation and treating of construction joints, filling of honey combs with polymer modified mortar (Cement: Sand : smart care multipurpose polymer of Asian Paints or equivalent product of Thermax/ Berger ) (b) Providing PCC (1:2:4) type B-0, 25mm thick screed bed or bedding layer over roof surface . (c) Cleaning the surface and applying (Resin & Hardner) smart care Epoxy Primer 2k of Make Asian paints or equivalent product of Thermax/ Berger ) on the cleaned surface for bonding of PU magnum with the existing concrete surface. (d) Supplying, providing and applying waterproofing treatment to Terrace area with Asian Paints Smart care PU magnum, single component highly elastomeric seamless cold applied modified PU coating or equivalent product of Thermax/ Berger) including all necessary surface preparation, coving using smart care multipurpose polymer, water pond test, etc. complete as per manufacture's specifications and application methodology. The same coating shall be applied in two coats achieving a total thickness of 1mm. The coating shall have dual combination of 250% elongation . Execution to be done with authorised applicator of the manufacturer. Work will be executed in smart assurance system. Contractor to give 10 years guarantee for the roof treatment work.

Cutting around the pipe 75/100mm bore waste pipe/soil pipe including taking out plant roots up to any depth in brick masonary and rejointing in pipe joint in eppoxy mortar (Asian/Berger) and making good to existing surface all as directed by Engr-in-charge. (After the jointing pipe one week to be open for checking of leaking including scaffolding)

S & F in repairs PVC bib tap 15 mm dia complete all as specified and directed. Make : Prayag or equivalent

S & F in repairs PVC pillar tap 15 mm dia complete all as specified and directed. Make : Prayag or equivalent

Cleaning of manholes not exceeding 1.5m depth and removing the sludge and burying the waste material in borrow pits. (Note:-cost of the borrow pit shall be deemed to be included in the quoted rates of this item).

M&L for dewatering and desludging of septic tank/sokage well of any size and depth mechanically (solid contents if not removed by mechanically should be removed by manually after taking permission from Engr-in-Charge) and removing the sludge out side of MOD complete all as directed at site. After complete cleaning of septic tank the manhole cover shall be re-fixed in same position with CM 1:4 and bleaching powder spread on top surface of septic tank @ 1 Kg per septic tank complete all as specified and directed at site.

Pumping out sewage water from the man holes /Septic taank/soakage well at different locations by means of sewage tanker fitted with pump (5000 Ltr capacity) and disposing out off MD land as directed by Engineer-in-charge.

Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in soft/disintegrated rock complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers not exc 25 Cm. complete all as specified and directed.

Removing excavated material n exc 50 mtr and depositing where directed at a level n exc 1.5 mtr above the starting point. complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or Reinforecd concrete) set in cement mortar 150 mm internal dia including PCC bed complete all as specified and directed.

M&L for 150 mm internal dia salt glazed stoneware drain pipes laid in trenches and jointed as specified

M&L for concrete bed to drain pipes 150 mm internal dia including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete type C-2 1:3:6 complete all as specified and directed.

M&L walling of random rubble, well boned , bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and directed.

All as per item No. 157 above but except stones complete all as specified and directed by the Engr-in-charge. (Stone obtained from demolition shall be reused).

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for raised pointing in cement mortar (1:4) to random rubble, uncoursed stone masonry or brought up to courses of any description complete all as specified and directed by Engr-in-charge.

M&L for reinforced precast cement concrete 1:1:2 (using 20mm graded stone aggregate) 50mm thick as in landings, cover slabs ( for manholes etc.) vibromatic, using surface vibrator, articles with plain faces, with 1.25mm thick MS sheet around the manhole cover painted with bituminous paint including demolition and necessary form work , complete all as specified and directed.

M & L for cement concrete ( 1:3:6 ) type C1 (using 20 mm graded stone aggregate) as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement and necessary form work, including demolition complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc

M&L PCC (1:4:8) type D2 (using 20 mm graded crushed stone aggregate) as in sub base finished even and rough to received top layer of concrete including demolition complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed.

M&L for construction of soakage well, excavation in any type of soil, foundation PCC 1:3:6 wall of honeycombed, Brick masonary in CM, RCC cover slab size of well 2.40 dia & overall depth 3.00M including demolition of existing old serviceable soakage well and filling soil to match surface with existing ground surface complete asll as specified and directed. Note : the rate of soil for filling in old U/s soakage well is included with this item..

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, lamp holders, regulators, sockets, light fitting any type etc complete. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed by Eng.-in-charge

M&L for Point wiring with 1100 Volts, grade 1.5 Sqmm. (nominal area) ,PVC insulated but unsheathed multistranded copper conductor single core FRLS cable drawn through and including non metallic medium duty rigid PVC concealed conduit (medium duty) 20mm dia or higher size complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including pressed iron/steel suction box of thickness1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly complete all as specified and directed by Engr.-in-charge of following.

All as per Item No 168 mentioned here-in- before but one three pin 5 Amps socket out let on the same board with other switches complete all as specified.

All as per Item No 168 mentioned here-in- before but one three pin 5 Amps switch socket out let on the independent board with other switches complete all as specified.

All as per Item No 168 mentioned here-in- before but one bell/ buzzer point controlled by bell push complete all as specified.

All as per Item No 168 mentioned here-in- before but one light point controlled with switch 2 way complete all as specified.

All as per Item No 168 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 2.5 Sqmm FRLS copper conductor for continuous earthing complete all as specified and directed.

M&L point wiring with 1.5 Sqmm (Nominal area) FRLS PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor in existing steel/PVC conduit with continuous earth wire 1.5 Sqmm FRLS PVC insulated, unsheathed stranded copper conductor cable and connected to common earth dolly, with and including 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0 mm thick hylum sheet cover fixed with brass screw complete with all accessories for one light point/Fan point controlled by one ,one way switch.

All as per Item No 174 mentioned here-in- before but one three pin 5 Amps socket out let on the same board with other switches complete all as specified and directed.

All as per Item No 174 mentioned here-in- before but one three pin 5 Amps switch socket out let on the independent board with other switches complete all as specified and directed.

All as per Item No 174 mentioned here-in- before but One bell/buzzer point controlled by bell push complete all as specified and directed.

All as per Item No 174 mentioned here-in- before but one two way point controlled with switch 2 way complete all as specified and directed.

All as per Item No 174 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 1.5 Sqmm FRLS copper conductor for continuous earthing complete all as specified and directed.

S & F Switch piano flush type single pole one way 230 Volts 6 Amp complete all as specified and directed.

S & F Switch piano flush type single pole two way 230 Volts 6 Amp complete all as specified and directed.

S & F Socket outlet 3 pin , 230 Volts 5/6 Amps flush type multipurpose 5 pin complete all as specified and directed.

S & F bell push flush type 5 Amps 230 Volts single pole complete all as specified and directed.

Supply and fixing Socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type IS: 1239-1988 marked with valid CML No complete all as specified and directed.

Supply and fixing Switch piano flush type, single pole, one way, 230 Volts 15/16 Amps marked with valid CML No. complete all as specified and directed.

S & F calling bell ding dong type AC 230 Volt single pole complete all as specified and directed. Make:- Havells/Anchor/Cona.

S & F step type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts, 6 Amps 120 watts complete all as specified and directed.

Supply and fixing Ceiling rose, Three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified and directed.

S&F angular Lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F in repair mirror light decorative compact luminaries with decorative ends caps 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed . Make Havells or equilent in Philips/Wipro

Supply and fixing in repair 8/10 Watts LED Bulk head light fitting die cast alluminum body and defused glass cover complete all as specified and directed. Make Havells or equilent in Philips/Wipro

S&F in repair LED tube light fitting batten type all in one single phase 18/20 W with lamp 6500/4000 K complete pre-wired all accessories complete all as specified and directed. Make Havells or equilent in Philips/Wipro

Supply and fixing in repair of building security light luminaries with surge protector and photovoltaic/LDR sensor controlled made out of single piece die cast alluminium housing suitable for and including 1X25 Watt LED lamp type complete, pre-wired including bracket made out of 32 mm bore medium grade GI pipe made to shape with bolts, buts & washers of min 1.2 Mtr incl grouting of nuts or fasteners clamps and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified incl taking out old u/s fitting complete complete all as specified and directed. Make Greenstar/ Philips/Wipro Note: The unit rate include for painting to bracket with one coat of red oxide paint and two coat of alluminium paint before fixing

Supply and fixing LED recessed mounted 2"X2" Feet 34 Watt and higher wattage in CRCA powder coated box type fitting with polycarbonate diffuser CCT >5700 K ,CRI >80,PF>.95 incl taking down old u/s fitting complete all as specified and directed. Make Phillips /Crompton greaves/Wipro

M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with Two runs of 6 Sq mm as current carrying conductor and one run of 4 Sq mm as earth conductor PVC insulated FRLS cable with multi stranded copper conductor of nominal cross section area as under and drawing into and including concealed PVC non metallic rigid conduit medium grade complete all as specified incl taking down old u/s sub main complete all as specified and directed. Note:- Three runs of wire and one run of pipe shall be measured as one meter only for payment purpose.

S&F distribution board Vertical type TPN 4 Way double door, suitable for MCCB 63/100 Amps MCCB as incoming and MCBs for outgoing factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection incl taking out old u/s complete all as specified and directed. Note:- DB and MCCB/MCB shall be of same make Make:- Legrand/Hager/L&T AU

S&F in repair distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection. Note:- DB and MCCB/MCB shall be of same make Make:- Legrand/Hager/L&T AU

S&F in replacement Sheet metal enclosure SPN with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 10 KA C series complete all as specified & directed. Make:- L&T/Legrand/Scheinder

S&F, MCB 415 Volt, 10 KA, 4 pole 63 Amp TPN C curve all as specified and directed. Make-Lexic legrand/ABB/Schneider/Siemens.

S & F , MCB SP 6 to 32 Amp, 240 Volts, 'B' curve having breaking capacity 10 KA complete all as specified and directed. Make-Lexic legrand/ABB/Schneider/Siemens.

S & F , MCB SPN 40 to 63 Amps, 240 Volts having braking capacity 10 KA complete all as specified and directed. Make-Lexic legrand/ABB/Schneider/Siemens.

Material and labour for CPRI approved chemical earthing complete with GI Pipe electrode 50mm dia, 2 Mtr long with terminal size 50 x 6 mm buried directly in ground not less than 2.25 m deep below normal ground level connected with and incl galvanized wire 4 mm earth lead upto DB by means of nuts bolts check nuts GI washers etc duly protected b galvanized iron pipe 15mm bore (light grade) including PVC accesse well and cover and gel type back fill compound necessary earth work in soft/ loose soil complete all as directed by Engr-in-Charge including testing on completion all as specified and directed. incl demolition to existing one complete all as specified and directed. Make SNE/OBO/ENNOVE

S&F in replacement exhaust fan electric single phase AC 240 Volts 50 Hz heavy duty corrsion resistant of 300 mm size 1400 RPM, aluminium pressure die cast motor powder coated paint finished, light weight, heavy duty, double ball bearing with louvers and connecting including provision three core flexible PVC insulated multi stranded copper conductor cable of size 0.5 sqmm from ceiling rose to connector, including four Nos of nuts, bolts and washers for fixing the frame complete all as specified. (Note:- Old unserviceable exhaust fan will be deposited to E/M store yard)

Alankar Traders

M/S JAI PRAKASH GOEL

M/S Gupta and Sons

M/s Anil Kumar

M/S C S AITHANI