Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.6 LAccepted-AOC INDEX NO B 48 HQ CE SWC JAIPUR A 202 RATHRAM PANORAMA GALA GIMAKHANA ROAD NEAR AMMANJARI BUNGLOWS SOUTH BOPAL AHMEDABAD 380058 | AHMEDABAD | AHMEDABAD | GUJARAT | 380058 | L1 | Accepted-AOC Accept | |
| 2 | L2₹29.3 L+₹68,811.63 (2.41%)Rejected-AOC 103 HARIAKSH PLAZA HOSPITAL ROAD BHUJ KUTCH GUIARAT 370001 | BHUJ | KUTCH | GUJARAT | 370001 | L2 | Rejected-AOC Reject |
Tender Value
₹27.5 L
EMD Value
₹55,000
Closing Date
8 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh K A Vardhan, IDSE
Office of the GE (Army) Camp Hanuman, Ahmedabad - 380 004
SPL REPAIRS AND ADDN ALTN TO BLDG P01 AND PROVN OF TOILET TO BLDG P06 AT ZONE A AHMEDABAD
2022_MES_551188_2
8287/E8
Open Tender
Civil Works
Works
180 days
GE (Army) Ahmedabad
As per NIT
8 documents required · 8 mandatory
₹500
GE (Army) Ahmedabad
₹55,000
Yes
1 Dec 2022
26 Sept 2022
10 Oct 2022
26 Sept 2022
8 Oct 2022
26 Sept 2022
Amount
Demolition of brick work built in cement or cement lime mortar complete.
Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition)Roofs, floors (other than ground floors), beams, staircases,RCC tank, landing, chajjas and similar suspended work complete.
Dismantling timber scantling 40Sqcm and over in section in any position in unframed work as in rafters, purlins etc complete.
Dismantling of timber scantling fillets, rails, posts, rafters, purlings etc. under 40sq cm in section in frame work complete
Dismantling of plain or courrugated steel sheeting any auge, thickness including nainital or similar pattern roofcovering complete.
Dismantling asbestos cement (corrugated or semi-corrugated etc.) sheets in roof covering complete.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.,) or insulation boards/slabs/blankets, any thickness, including cover fillets complete.
Excavation in soft / loose soil in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out complete.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete.
Labour only for soil filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete.
M&L for Broken stone or boulder Hardcore of guage n exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick , watered and rammed to a true surface complete.
M&L Cement concrete in foundations, filling and mass concrete (PCC) Type D2 1:4:8 (40 mm graded aggregate) etc complete
M&L for providing reinforced cement concrete 1:2:4 (Nominal Mix) type B-1, using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc complete
M&L for providing reinforced cement concrete 1:2:4 (Nominal Mix) type B-1, using 20 mm graded stone aggregate as in slabs, beams complete
M&L for RCC (Nominal mix) type B1 1:2:4(20mm graded aggregate) for Beams, cantilevers,bressummers, lintels over 1.5m span complete
M&L for providing reinforced cement concrete 1:2:4 (Nominal Mix) type B-1, using 20 mm graded stone aggregate as in columns, pillars, piers, posts and struts etc complete
Supplying & applying Integral waterproofing compound complete.
M&L for brick work with sub class 'B' bricks built in CM (1:6) straight or curved on plan & exc 6 m mean radius with old size bricks complete.
M&L for cutting and chaseing in brick wall built in cement mortar for concealed GI tubing and making good in CM, 1:4 not exc 10cm in girth complete.
M&L Use & waste for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; verticla or to batter for rough finished surfaces of concrete complete.
M&L Use & waste for form work for rough finished surfaces of concrete measured flat for Roof Slab complete.
M&L Use & waste for formwork for rough finished surfaces of concrete to sides and soffits of floor or roof beams, beam haunch girders, bressummers,lintels, cantilevers, shelves including supports, overhangs etc. also splays between floors and beams, etc complete.
M&L Use & waste for Formwork for rough finished surfaces of concrete to sides of pillars, posts, struts, piers, columns and stanchions complete.
M&L Use & waste for Form work for rough finished surfaces of concrete to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and simila rwork exc 10cm but n exc 20cm complete.
M&L for 1st Class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete
S&F factory made 30mm thick flush shutter , Solid core , construction with solid board core and plywood face panels commercial type on both sides complete.
Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete.
Taking down chowkhats or frames area exc. 1.50 Sqm and n. exc 4.00 Sqm each with shutters (without taking off shutters from the frames) complete.
M&L for taking down aluminium partition and refixing in the same position complete.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete.
S&F Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed in opening as per specification complete.
S&F in repair solid PVC wall lining/paneling consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame with 5 mm PVC fillet of width 35 mm for wall panelling for fixing to wall to make PVC frame complete.
S&F 200mm extruded aluminium alloy tower bolts extruted sections anodised complete.
S&F 300mm long aluminium alloy anodised sliding door bolts complete complete.
S&F 100 mm long mild steel butt hinges, medium weight cold rolled complete.
S&F 150 mm size aluminium anodised door handles complete.
S&F 150mm extruded aluminium alloy handles fabricated type anodised complete..
S&F Stainless steel butt hinges medium weight 100mm long complete.
S&F in repair 25 mm dia stainless steel fancy type curtain rod with brackets of stainless ends etc fixed complete.
S&F brass chromium plated tubular towel rail, 20 mm dia, D type 60 cm long between flanges complete.
M&L for Framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework ofwater tanks and similar work conforming to Fe.290.Gde-E-165 complete
M&L TMT bars 10 mm dia & over cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips quality conforming complete.
M&L TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips quality conforming complete
S&F powder coated anodised Aluminium door frame of size 100 x 44 x 1.98mm thick with one or more rebates and shutters pull and push type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98 mm thick, botom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 X 44mm X 1.98mm thick including necessary jointing cleat, glazing clip, rubber packing, anodized aluminium beading, screws, anodized aluminium fittings such as floor spring with hydrolic door closer, handles 'D' type 125mm, floor door stoppers, tower bolt 200 mm, sliding door bolt 300 mm, mortice lock, 5mm thick tinted glass & preleminated particle board panel and making good of wall surface to match existing surface complete
S&F powder coated anodised Aluminium alloy sections 3 track sliding shutters windows with frames Series-B (18 mm) and duly fitted with & including neoprene beading, glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm , aluminium alloy handles, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements etc. complete.
S&F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete.
M&L for grill medium grade of mesh size 75mm x 75mm with 6mm square anodised aluminium bars fixed with aluminum frame of size 37 x 19 x 2mm complete.
S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; flats fixed with angle cleats etc conforming to Fe.410-W (Gde-E-250, Quality-A) complete.
S&F designer false ceiling made of 12mm thick gypsum board over and including GI grid of standard quality to hold false ceiling including two coats of interior emulsion of any colour one coat of primer and two coats of acrylic putty complete.
S&F 4mm thick coloured textured designer ceiling board (Everest) of size 595X595 mm fixing with screws/clips including Tee grid suspension system of size 600 mm x600 mm type-1 made out of roll framed hot dipped galvanised steel zinc coated of not less than 120 gm/sqm ,main runner shall be 0.3 mm thick of section 24 mmX33 mm cross runner 0.3 mm thickof section 24 mmx25 mm,wall angle shall be 0.63 mm thick of section 24 mmx24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod ,system exposed portion shall be pre painted polyster coated in off white/white in colour complete with material,fixing, jointing etc complete.
S&F prepainted galvalume aluminium zinc coating GI base corrugated steel sheet 0.60 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / clading to wall, fixed with self tapping screws Complete.(Note : Corrugation shape and colour of sheet shall be approved)
S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.60mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete
S&F 6mm thick asbestos cement corrugated or semi corrugated sheets in roofs walls etc fixed with L-type or J-type or cranked hook bolts complete.
Refixing of asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L-type or J-type or cranked hook bolts complete.
S&F 6mm thick asbestos cement two piece serrated ridge for corrugated or semi corrugated sheets fixed with L-type or J- Type or cranked hooks bolts complete.
S&F 0.80 mm thick plain galvanised iron (PGI) sheets having zinc coating @ 120 gram per sqm inclusive of both sides, as in ridges, hips, valley gutters, drip, straight flashing etc., fixed in any pattern complete.
M&L providing PCC 1:3:6, type C2 (using 40 mm graded aggregate), 75 mm thick, finishing cement concrete surfaces even and smooth without using extra cement as in plinth protection, path etc including necessary form work and provision of bituminous joints mixed with bitumen and sand at intervals not exc 3.00mtr complete.
M&L for cement concrete type D-2, 1:4:8 (40 mm graded agg.) 75 mm thick as sub base in foundation complete.
M&L for Glazed ceramic tiles coloured (300x450mm) x 7mm thick, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete
S&F Non skid Ceramic tiles Non - skid Ceramic tiles 7 to 8 mm thick square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick rendering in CM 1:6 complete.
M&L Vitrified light shade Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and over and including screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors complete.
M&L Vitrified light shade Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in vertical surfaces such as skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in cement mortar 1:4 complete.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete.
Taking down cement plaster on wall of any description including racking out joints, hacking for key and scrubbing down with water etc complete.
M&L for Rendering on fair faces of brick work of thickness 15 mm thick in CM (1:4) mixed with water proofing compound in top @ 3% by weight of cement or as per manufacturers instructions finishing the surface fair and even with out using extra cement complete.(WPC measured and paid separately)
M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces with in CM 1:6 is to be finished even & smooth (without using extra cement) wall complete.
M&L for 10 mm thick rendering on cement concrete as in ceiling with cement mortar 1:3 to be finished even & smooth (without using extra cement) complete.
M&L for preparation of new plastered surfaces on walls and applying two coats of cement based paint over a coat of white cement primer complete.
M&L for prepartion of new plastered surfaces on walls and applying two coats cement based paint on over one coat of primer on walls complete.
M&L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper over alkali resistant primer & 1.5mm average thk wall care putty complete
M&L for preparation of new surfaces of ceiling plastered and applying three coat of white wash complete
M&L for complete removal of existing treatment and applying two coats of oil bound distemper over wall care putty with Priming plastered and other surfaces with alkali resistant priming paint walls complete.
M&L complete removal of existing treatment on wall surface and applying two coat of cement base paint over a coat of alkaline resistant primer after preparation of wall surface complete.
M&L for Preparation of new or previously untreated wooden surfaces of any description, not otherwise, described, over 10cm width or girth and applying two coats of synthetic enamal paint over a coat of pink primer complete.
M&L for preparation of old surfaces of wood or wood based marerials of any dexcription not otherwise described,over 10cm width or girth and applying one coat of syntetic enamel paint complete.
M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete.
S&F 15 mm UPVC pipes of pressure rating 10 kgf/cm2 any type of pipe with removal socket joint, togheter with all tube fittings (such as bents, elbows, tees, short pieces, connection, caps, plugs and unions etc and fixed with clips wall hooks, wooden plug etc fixed to walls, in floors, ceiling and making good complete.
S&F 20 mm UPVC pipes of pressure rating 10 kgf/cm2 any type of pipe with removal socket joint, togheter with all tube fittings (such as bents, elbows, tees, short pieces, connection, caps, plugs and unions etc and fixed with clips wall hooks, wooden plug etc fixed to walls, in floors, ceiling and making good complete.
S&F for 500 ltrs rotational moulded polyethenine water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as in SSR complete.
S&F for cast copper alloy bib taps chromium plated 15mm bore pipe with captain head complete.
S&F for Pillar taps, fancy type cast copper alloy, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed15 mm dia bore pipe. complete
S&F for 2 way bib cock with flange fixed in 15mm bore pipe & similar to cat 6512 of prayag make complete
S&F in repair Angle valve cast copper alloy with capstan head chromium plated screwed down, high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete.
S&F for stop cock (conceled type) cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipes or for unions and fixed of 15mm bore complete.
S&F for Gun-metal, globe or gate valves 20mm with iron wheel head, screwed both ends for iron pipe complete.
S&F for ball valves high perssure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore, complete.
S&F for PVC connections 600 mm long, 15 mm size with PTMT nuts complete.
S&F for PVC (SWR) pipes 75 mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete.
S&F for PVC (SWR) pipes 110mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete.
S&F for PVC (SWR) bends any radius, 75 mm bore complete.
S&F for PVC (SWR) bends any radius, 110 mm bore complete.
S&F for PVC (SWR) vent cowl, 110 mm dia complete.
S&F for 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete.
S&F for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete.
S&F for vitreous china wash down water closet pan (pedestral pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe etc complete.
S&F for 10 litres PVC valveless, syphonic action type flushing cistern, with inlet ball valve, float and handleincloding brackets and PVC connections 15mm size with PTMT nuts of length 600 mm complete.
S&F for PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device complete.
S&F for vitreous china wash basin, white, flat back, size 550x400m excluding taps, chain & plug & porcelain stopper including brackets incl cutting for pinning in ends of bracketes or erecting stand and fixing and supply and waste pipe complete
S&F for soap dish stainless steel glossy finish & similar to cat BA 15S of prayag make type fixed with screws complete.
S&F for health faucet spray type brass, chromium plated with 1.0 m long tube & hook & similar to cat BEA 81 of prayag make type complete.
S&F for corner glass shelf 300mm with ABS brackets (300x600) 7 similar to cat BEA 46 of prayag make type complete.
S&F for Brass toilet paper holder glossy finish & similar to cat BA 08 of prayag make type complete.
Taking down carefully surface aluminium or copper point wiring with PVC casing-caping (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete.
Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators for One light point controlled by one switch complete
All as per Item No 109 above but for One fan point controlled by one switch.
All as per Item No 109 above but for One socket outlet 6 amp controlled by one switch on the same board with other switches.
All as per Item No 109 above but for One socket outlet 6 amp controlled by one switch on indepdendent board.
All as per Item No 109 above but for One bell point controlled by one bell push.
All as per Item No 109 above but for Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 2.5 sqmm for one 16 amp socket outlet controlled by one switch on independent board complete.
S&F angle holder, insulated polycabonate body with back plate complete.
S&F switch piano flush button single pole one way 6 amp complete.
S&F switch piano flush button single pole one way 16 amp complete.
S&F modular switch one way 6 amp 1 module complete
S&F modular switch one way 16 amp 1 module complete
S&F bell push, flush type, 6 amp 240 volts complete.
S&F modular socket 6 amp 2/3 pin combined 2 module complete
S&F modular socket 6/16 - 2/3 pin combined 2 module complete
S&F Ceiling rose 6 amp, 3 plates polycarbonate body complete
S&F bell multi music type, AC, 240 volts complete.
S&F socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete.
S&F modular hum free electronic step fan regulator 120watt 2 module complete
S&F ceiling rose 6 amp, 3 plates polycarbonate body complete.
S&F MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces complete
S&F MCB distribution board SPN, 240 volts, 4 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces complete.
S&F MCBs Single pole 6 to 16 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs & similar to Make Legrand DX3 cat ref no. 408587 to 408592 complete
S&F MCBs Double pole 32 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs & similar to Make Legrand DX3 cat ref no. 408636 complete
S&F in replacement LED batten (1.2 m) made of Aluminium housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 & similar to Make : Philips cat ref no. ENDURALED BATTEN " BN 108C LED 20S PSU CDL WH "complete.
S&F LED fixture 8 watt including connection & similar to Philips LED LINEA cat ref no. BN 550 WLED 6 - 6500 complete
S&F in replacement of existing UNSV recess/ suspended slim LED panel light with powder coated rim 36 watt of size 2x2 feet, high efficiency designer recessed mirror optic luminary with ceiling cut out size 36 watt including LED lamps & connecting electrically to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm & similar to cat no LCTLRN-36CDL of crompton make type complete.
M&L submain wiring 2x6 sqmm alongwith 1x6 sqmm earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit 20mm dia bore, medium grade, ISI marked ivory colour along with accessories complete
S&F ceiling fans with blades, down rods, electronic regulator and accessories, 230V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) complete.
Taking down carefully aluminium or copper submain wiring with PVC surface conduit or casing caping and making good disturbed surfaces complete.
Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete.
S&F sheet metal enclouser single pole and neutral with a 2 pin and earth plug and socket 20 A 240V complete with one single pole MCB of capacity 20 A complete.
Taking down Ceiling Fan of any make, type and sweep by disconnecting Electric Connection and keeping in MES store yard.
S&F air ventilation fan 250 mm in toilet in rectangular in shape, PVC body, white colour 230V including louver shutter complete.
VIJAY CONSTRUCTION CO
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .