GENERAL-Navakerala Sadassu - West Coast Canal Tourism Project -In Chirayinkeezhu constituency-General Civil Work

Work Name:GENERAL-Navakerala Sadassu - West Coast Canal Tourism Project -In Chirayinkeezhu constituency-General Civil Work

. complete as per the direction of departmental officers at site from approved estimate EST No. :IRR/IA/EST/1459/2022_5_6_6 (Edit Id : 5)Ö10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Ù13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work‚13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new workô12.26.1:Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately).6 mm thick cement fiber board as per IS: 14862â
50.12.2.4:Providing & fixing Poly carbonate multi wall plain sheet 6 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12m or as decide by the Engineer in charge. The sheets shall be fixed using self drilling/self tapping screw of size (5.5x55mm) with EPDM seal complete upto any pitch in horizontal/vertical curved surfaces, but excluding the cost of purlins, rafters, trusses, and including cutting to size and shapes where ever required.•
11.41.3:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 800x 800 mm11.47.3:Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer,in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 800x800 mm`9.117.2:Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0mm (±0.2 mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer-in-chargeExtruded section profile size 42x50 mmmetrey9.118.1:Providing and fixing to existing door frames24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness,fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge( For W.C. and bathroom door shutter).o
21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)°9.88:Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.Î13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)Ë13.45.1:Finishing walls with textured exterior pint of required shade:New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm4
50.18.7.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall^
50.18.8.2.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 20 mm pipe 10 Kgf/ cm2P
50.18.8.7.1:Prov

nting with PVC solvent cement -75x63 mm dia Reducer”50.18.9.21.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Bend˜50.18.9.21.5:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75x75x75 mm dia Tee™50.18.9.21.7:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Vent cowl–50.18.9.22.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow™50.18.9.22.3:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement-110 mm dia Door Elbow™50.18.9.22.8:Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl×50.18.9.4.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.32 mm dia 10.Kgf/cm2Ø50.18.9.8.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 6 Kgf/ cm2Ó50.18.9.9.2:Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2
18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Litre˜19.33:Constructing soak pit 1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
12.7.1:Providing and fixing 15cm wide, 45 cm overall semi circular plain G.S. sheet gutter with iron brackets 40x3 mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.0.80 mm thick with zinc coating not less than 275 gm/m2
12.41.1:Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75 mm diameterw18.17.1:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal borew18.17.2:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal borew18.17.3:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal borer18.21.2.1:Providing and fixing uplasticised PVC connection pipe with brass unions: 45 cm length15 mm nominal borem18.49.1:Providing and fixing C.P brass bib cock of approved quality conforming to IS: 8931.15 mm nominal boreŸ18.51.1:Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore’18.53.1:Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore¯18.65:Providing and fixing PTMT Soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fittings arrangements, weighing not less than 106 gms.´
17.2.1:Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lidÐ17.31:Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.þ17.60.2.1:Providing and fixing trap of self cleansing design with screwed down or hinged grating without vent arm complete, including cost of cutting and making good the walls and floors: 100 mm inlet and 75 mm outletSand cast iron S & S as per IS - 3989æ17.72:Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms¹50.17.1.2:Supplying and fixing CP Towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.ª50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.Š
19.4.1.1:Providing and fixing square-mouth S.W. gully trap class SP -1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P typeWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5ï4.3.2:Centering and shuttering including strutting, propping etc. and removal of form work for:Retaining walls, return walls, (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.(
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)¨5.22.2:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelHard drawn steel wirekilogram¦60.6:PVC WEEP HOLES- Providing weep holes using 75mm dia. PVC pipes working pressure 4kg /sq.cm including cost of materials, conveyance, labour charges etc. complete.ï2.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.9
60.2.1:EARTH WORK FILLING- Supplying contractors own earth including cost of conveyance and royalty and filling (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.p
16.84:Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost.)í16.91.1:Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.05.33.1.1:Providing and laying in position ready mixed or s

ite batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement All work upto plinth levelConcrete of M25 grade with minimum cement content of 330 kg /cumD5.33.2.1:Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement All work above plinth level upto floor V levelConcrete of M25 grade with minimum cement content of 330 kg /cumÎ5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more¾60.64.1:Coconut Pile - Supplying and stacking well matured straight coconut post for driving down throug various strata bellow bed level including cost coveyance labour charges etc complete.60.64.6:Cutting and removing the excess length of wooden piles to lines and levels and removing the cut end of piles and stacking within 150m
OD25333/2025-2026:Providing Cast Iron Bollards with approved drawings and design including cost of all materials, moulding charges , cost of fixtures and all labour charges etc. complete from approved estimate EST No. :IRR/IA/EST/1459/2022_5_6_6 (Edit Id : 5)JOD25332/2025-2026:Driving down RCC piles of 300mm square in size to the required depth in line and levels to safe working loads, including shifting the casted piles to the driving spot without damaging the pile with necessary lifting equipments, placing in correct position to line and driving down to required depth with the help of driving equipment including hire charges for driving equipment, machinery,planks, fuels, labour charges etc complete as per the direction of the departmental officers at site from approved estimate EST No. :IRR/IA/EST/1459/2022_5_6_6 (Edit Id : 5)®
OD25343/2025-2026:Chipping the top of RCC piles to required line and level by mechanical/manual means without damaging the remaining part of the pile and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars. from approved estimate EST No. :IRR/IA/EST/1459/2022_5_6_6 (Edit Id : 5) OD25344/2025-2026:Providing and laying Natural finish Tandur stone tile flooring(size 58.4x58.4 cm)40mm thick in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with tiles over 20 mm (average)thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid , jointed with cement slurry grouting and Grouting the joints of flooring tiles having joints of 3 mm width, usingepoxy grout mix of 0.70 kg of organic coated filler of desired shade dOD25315/2025-2026:Supply and installation of CHEST&SHOULDER COMBINATION Descriptions Product Area : 1.8m x 1m (6ft x 3.5ft) Safe play Area : 3.8m x 2m (10ft x 7ft)Function: Strengthens Chest muscles, Forearms & Triceps. Technical Specification: Main Frame: The main frame of Chest Press double is made from 100NB GI Pipe. Seat frame: Seat Frame made from 32NB GI pipe. Material used for seat are LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect lend of uniform thickness & durability. Handle: Handle frame is made from 32NB and 25NB GI Pipe. Material used for handgrip is EPDM (ethylene propylene diene monomer) Rubber.Foot rest: 32NB GI material pipe is used for footrest. Bearing: Bearings are oil sealed, self-lubricated made of SKF/ NTN/ NACHI make shall be provided for smooth & trouble-free movement. Others: Internal lock to limit the movement Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 40- 60micron.Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instruments.Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Colour or similar specifications approved by departmental officers at site.õOD25329/2025-2026:Supply and installation of LEG PRESS DOUBLE STANDARD Descriptions Product Area : 2.05m X 0.5m (6.73Ft X 1.64Ft) Safe Play Area : 3.05m X 1.5m (10Ft X 5Ft) Function: Workout of thigh and calfs Strengthening Legs Technical Specification: Post Dia: 80NB GI main vertical support pipe of Leg Press Double is fixed over 10mm thick base plate. 10mm thick clamping plates are attached to main frame to hold the rest of assemblies. Seat frame: Seat Frame made from 40NB bend GI pipes and Material used for seat is HDPE (High Density Polyethylene) UV stabilised/LLDPE. This seat frame is mounted on vertical support pipe through specially designed bearing housings. Foot rest: Footrest support to be of 25NB G.I Pipe. The materials used for footrest is Aluminum casting/LLDPE/HDPE/Nylon. Bearing Housing shall be made from MS material. Bearing: Bearings are oil sealed, self-lubricated made of SKF/ NTN/ NACHI / FAG make shall be provided for smooth & trouble-free movement. Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 40-60micron. Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instruments. Nut and Bolts: Galvanized/S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate: ISO9001:2015 Color: Multicolor for optional or customized and as per RAL Shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. Note: Images are only for references. Actual Product or colour of the product may vary.oOD25328/2025-2026:Supply and installation of HIP TWISTER DOUBLE Descriptions Product Area : 1.2m x 0.9m (3.9ft x 3ft) Safe Play Area : 2.2m x 1.9m (9.85ft x 5.3ft) Ideal For : 13 Years & above Function:Stretches waist & Upper Body. Technical Specification: Main Support: The main support of Hip twister consist of

100NB G.I Pipe. Handle: 25NB Galvanized pipe bend to form handle of Hip Twister product. Footrest Bend Pipe: 40NB GI pipe is attached with main frame to form a foot rest having 130x50x5 thick plate Standing or Rotating Disc : Standing Disc of 300mm Dia round size shall be made of HDPE/Metal. 15mm thick Sheet and Plate 10mm thick for base support. Bearing: Bearings are oil sealed, self-lubricated made of SKF/ NTN/ NACHI make shall be provided for smooth & trouble-free movement. Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 60micron.Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instruments. Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Color or similar specifications approved by departmental officers at site,- OD25334/2025-2026:Supply and installation of AERIAL STROLLER Descriptions Product Area : 1m x 0.5m (5ft x 2.6ft) Safe Play Area : 2m x 1.5m (7.2ft x 4.9ft) Ideal For : 13 Years & above Function:?Strengthens Leg Muscles. Lower body workout Technical Specification: Post Dia: The Aerial Stroller having Ergonomic design with 100NB GI main vertical support pipe of Aerial Stroller is fixed over 10mm thick base plate. Clamping plates are attached to main frame to hold the rest of assemblies. Footrest and Handles: Footrest bend and Handle having 40NB and 25NB Dia galvanized pipe respectively The materials used for footrest is aluminum/LLDPE/HDPE/Nylon. Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 60micron. Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instruments. Bearing Housing shall be made from MS material. Bearing: Bearings are oil sealed, self-lubricated made of SKF/ NTN/ NACHI / FAG / NRB make shall be provided for smooth & trouble-free movement.Pins and Circlips: Pins shall be made from EN8/ MS material & Circlips made from standard material.Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety agains entrapment. Colour or similar specifications approved by departmental officers at site, OD25324/2025-2026:Supply and installation of FISH BIN Descriptions Product Area : 0.3m Dia. (1.3ft Dia.)?Height : 0.7m (2.6ft) Capacity : 84 Ltrs Technical Specification: Fish Bin : Fish bin is made up of Fiber reinforced plastic(FRP).This innovative fish dust-bin is designed for accomodating dry as well as wet kind of trash in the garden or public places.The fish dustbin has shape, size and parts that of a fish which looks like a real fish and the trash can be put through inside the mouth of the fish.FRP products :All the Fibre Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type.We use international quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required colour to the product.Thickness of the FRP material varies from 3 mm to 5 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test)b. Color or similar specifications approved by departmental officers at site,-¤OD25341/2025-2026:Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work‘5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform‘5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers 5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and StrutsN
12.13.2:Providing and fixing fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing accessories in all colours with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete:Eave's filler piecesG
12.13.6:Providing and fixing fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing accessories in all colours with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete:Ridge finialspairÀ13.17:6 mm cement plaster 1:3 ( 1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams.8.2.2.2:Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm«
OD25318/2025-2026:Supplying and fixing Table top wash basin (Size 580x380x110mm) or nearest size wash hand basin including supplying and fixing waste coupling, pillar tap (Heavy, best quality) 1 no., 32mm PVC waste pipe and 15mm heavy duty PVC connection 1 no 15mm CP Brass angle valve including cutting and making good the walls etc. complete. - CERA CATMID Snow white or equivalent EST No. :OEO/TRIDA/EST/430/2025_5_1_1 
OD25335/2025-2026:Providing Colour coated Asphalt roofing Shingles including sufficient length of ridge pieces as roof covering for boat jetty roof neatly laid and water proofing the roof full as per the direction of departmental officers at site EST No. :IRR/KP/EST/1415/2023_5_1_1Å13.80:Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.‡13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work_
OD25330/2025-2026:51.19.ST3. Supplying and installing ready made PVC Septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer incharge (Provision for CC/RCC/Sand/06mm aggregate for the preparation of bed shall be paid separately) 3. 25 to below 35 flush capacity )OD25322/2025-2026:Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge—10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required siz

considered excluding fixing accessories such as nuts, bolts, fasteners etc.)6
OD25345/2025-2026:Supply and erection of Decorative tubular stainless steel pole having 5 mtr height, 2.5-2inch outer dia made from min. 2mm thick plate for fixing of solar light, all other incidental and miscellaneous charges complete from approved estimate EST No. :IRR/IA/EST/1459/2022_5_6_6 (Edit Id : 5)setÇOD25319/2025-2026:Supply, conveyance, installation, testing and commissioning of 30W Integrated Solar LED light fitting with all accessories. Each unit should include 18V,75W panel with Grade A solar cells, 24Ah, 12.8V LiFePO4 type battery, Luminaire housing component to be Aluminium alloy with powder paint, IP65, LED chip shall be Philips/Osram, THD <10%, efficiency greater than 85%,3800-4500 lumens,etc. as required with 5years warranty . Luminaire shall be suitable for mounting at a height of 5-6m, should have 24hrs autonomy, PIR sensor for better efficient lighting. Certifications:MNRE/IEC/BIS/LM80/ROHS/IP65) from approved estimate EST No. :IRR/IA/EST/1459/2022_5_6_6 (Edit Id : 5)•
5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size derived from natural sources)Ê
5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).
50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc [email protected]:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
60.7.8:DR with Departmental. Stone - DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course using departmental rubble including packing to compactness to lines and levels, labour charges etc. complete as per direction of Departmental officers at site
60.7.1:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at siteô30.2.57.1:Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieable material?s as per direction of officer in charge (excluding cast of plant & water )Cost of plantation per trees plants (for 100 nos.=427.45/100)¨OD25339/2025-2026:Providing and stacking of Trothic Ixora/Chethi Plant of height 20 cm to 30 cm at site including conveyance as per direction of the officer-in-charge.«30.2.2:Supplying and stacking of good earth at site including royalty and carriage upto 5 k.m. lead complete (earth measured in stacks will be reduced by 20% for payment)..
OD25346/2025-2026:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench 40/32 mm or nearest size,OD25331/2025-2026:Supply and Installation of UME SEE -SAW with Product Area : 1.85m X 0.45m (6ft X 1.4ft), Safe Play Area : 2.85m X1.45m (9.3ft X 4.8ft) Ideal For : 3-10 Years, Friends at a time : 2 with technical Specification: Handle grip: Hand Grip conforming to EN 1176-1:2015 for requirement of hand grip made from 20NB Galvanized pipe with end caps, See-saw lever: See Saw Lever made from 80NB Galvanized Pipe with strong load carrying capacity, Seat made from LLDPE by rotational moulding- 295x190x70mm Rotational molded seat with grip, See Saw stand with special Nylon-6 bush enclosed in a seamless pipe hinged to 50NB Support pipe, the stand is fixed with ISA for strong foundation grip, See Saw impact attenuator: is 1NO 31,125.00 31,125.00 6 made from 20NB Galvanized pipe, Bearing: heavy duty nylon bush, ROTO products manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic with thickness varies from 5 mm to 8 mm as per the product, pipes: Hot Dipped Galvanized Pipes with GI thickness of 60micron, powder coating: with pure polyester raw material, dry film Thickness maintained within the range of 50-70 microns tested for adhesion test with the help of cross hatch cutter instrument, Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps, all open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Color: Multicolor or similar specifications approved by departmental officers at site,Ë OD25325/2025-2026:Supply and Installation of FRP ROLLER SLIDE 5FTDescriptions Product Area : 5.6m x 1.0m (18.4ft x 3.3ft) Safe Play Area : 6.6m x 2.0m (18.7ft x 6.6ft) Age Group : 4-10 yrs. Friends at a time : 4 to 5 Technical Specification: Small H-Support: It is made from 25NB GI Pipe length 600mm with 10mm tor rod of length 300 mm for support & strong foundation Center Support pipe: 80NB hot dip galvanized Deck pipe of length 1980mm with GI thickness of 60 microns Ladder Frame: The slide ladder is made up of 25 NB GI pipe & the ladder hand-railing is made up of 15 NB and 20 NB pipes respectively. Ladder Step: Cold formed 16 Gauge GI Plated Sheet Length 500mm & width 90mm EN1176- 1:1998 conforming to EN1176- 1:1998. The trade and riser of the ladder are designed in such a way it wont entrap childs foot while playing. All the sharp edges and corners are properly grinded to give smooth finish so that children are not hurt while playing on it. Platform: It is 16 SWG GI Plated Platform of size - 500x450x60mm Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 60micron.FRP Roller Slide landing: It is FRP Roller Slide landing with support flanges of ISA conforming to standards IS-808-1964 & it is made up of Fiber Reinforced Plastic (FRP)FRP Roller Slide side arm: It Is made up of Fiber Reinforced Plastic (FRP) with reinforced pins for assembling the rollers FRP Roller Slide top: It Is made up of Fiber Reinforced Plastic (FRP)Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 60micron.Roller: It is made from LLDPE (Linear Low Density Polyethylene) Material. The most attractive and enjoyable of its kind, the slide chute consists of molded plastic rollers spread over the length. It is made in rotational molding.For Roto product: The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect lend of uniform thickness & durability. For FRP product: All the Fiber Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. We use international quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required colour to the product. Thickness of the FRP material varies from 3 mm to 5 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test).Powder coating: It shall be done of pure polyester exteriors ultra- stabilized powder Paints. Thickness maintained is a minimum of 60-70 microns.Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC

Color:Colour or similar specifications approved by departmental officers at site,- Multicolor for optional orcustomized Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate: Colour or similar specifications approved by departmental officers at site,-çOD25320/2025-2026:Supply and Installation of ANIMAL GO ROUND Descriptions Product Area : 2.1m Dia (7 ft Dia.) Safe Play Area : 3.1m Dia (10.2 ft Dia.) ? Ideal For : 3-12 Years Friends at a time : 4 Technical Specification: MGR frame : MGR Frame made from 40NB pipes welded together with bottom end over a circular plate meant for assembling bearing assembly. The top end of the pipe is welded with a ISF & a plate for mounting the animal (duck) over it. The four 40NB pipe are hold together with four 25NB pipe to form a strong structure. Bearing assembly :Bearing assembly with two bearings Center support : 80NB hot dip galvanized center support pipe of length 500mm with GI thickness of 60 .This pipe is welded with a 150x150mm base plate at bottom for fixing the foundation angles ISA & Circular plate on top with OD 200mm for assembling 1NO 34,875.00 34,875.00 9 the bearing. Foot rest : Foot rest made from 15NB Galvanized pipe with end caps welded to two plates forming a foot rest. Duck : Duck is made out of molded plastic in rotational molding process . Rotational Molded Products :The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability. Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness upto 60micron. Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instruments. Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Color:or similar specifications approved by departmental officers at site, ó13.62.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .9 OD25337/2025-2026:Supply and installation of S LOOP CLIMBER Descriptions Product Area : 4.5m X 1.1m (14.8ft X 3.6ft) Safe Play Area : 5.5m X2.1m (7ft X 12ft) Ideal For : 5-12 Years Friends at a time : 5-6 Technical Specification: Vertical support : 80NB Pipe welded together with a flange to form a strong frame withstand both the pitching & yawing moment. The 80NB pipe is hot dip galvanized pipe of height 2950mm with GI thickness upto 60.Top frame : 80NB Pipe welded together with a flange to form a strong frame withstand both the pitching & yawing moment. The 80NB pipe is hot dip galvanized pipe of height 4380mm with GI thickness upto 60.?Clamps : Two 80x20 sized clamps joined together to two 80NB clamps with non rusting nut -bolts made from Nylon Grade-6 plastic. Chain : Hot Dip Galvanized chain of dia 8mm and length 330mm to resist movement of pad in vertical direction & allowing motion of pad in bi-axial direction. S hook : S-HOOK is made up of SS 304 material which is used for mounting the discs to the clamps provided at the top pipe and also for clamping it with chain. Disc pad : The disc pads are made in rotational molding. The pad is fitted onto MS circle of 5 mm thick with GI plating. The plate is grounded with a GI chain and 25 NB GI pipes attached to it. Rotational Molded Products : The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic . Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability. This product is so designed so as to develop physical well being of the child and to increase physical abilities. Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness upto 60micron. Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instrument.s. Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Colour or similar specifications approved by departmental officers at site,-}OD25314/2025-2026:Supply and installation of HOPPER SPRING RIDER Descriptions Product Area : 1m x 0.5m (3.3ft X 1.6ft)Safe Play Area : 2m x 1.5m (6.5ft X 5ft)?Ideal For : 3-6 Years Friends at a time : 1 Technical Specification: Hopper :Hopper is made up of rotational molding process. It has been provided with four bolts. Hopper is bolted to the spring assembly.Spring assembly :It consists of top plate, spring, footrest & square base plate suitably fixed to each other with UBolts. The Spring is made from En47/45 Spring Steel & the two plates are made from MS with GI plating for corrosion resistance Rotational Molded Products : The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability.Foundation Stand :Foundation Stand made of 40NB Galvanized pipe with GI coated plates welded on both ends for fixing the square base on top and foundation angles at bottom.Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness upto 60micron. Pipe Materials or Class: Light Duty ('A' Class) & Medium Duty ('B' Class) Series of pipes only. Wall thickness of pipe varies according to class/Powder coating: It shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50- 70 microns. It is tested for Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Color: Multicolor for optional or customized & according to RAL shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrapOD25316/2025-2026:Supply and installation of PONNY SPRING RIDER Descriptions Product Area : 1m x 0.5m (3.3ft X 1.6ft) Safe Play Area : 2m x 1.5m (6.5ft X 5ft) Ideal For : 3-6 Years ?Friends at a time : 1 Technical Specification: ?Pony :Pony is made up of rotational molding process. It has been provided with four bolts. Pony is bolted to the spring assembly.?Spring assembly :It consists of top plate, spring,footrest & square base plate suitably fixed to each other with U-Bolts. The Spring is made from En47/45 Spring Steel & the two plates are made from MS with GI plating for corrosion resistance. Rotational Molded Products : The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability.Foundation Stand :Foundation Stand made of 40NB Galvanized pipe with GI coated plates welded on both ends for fixing the square base on top and foundation angles at bottom.Pipes: All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thick

nder foundation with good quality blasted rubble including conveyance of material and labour charges etc. complete as per direction of departmental officers at site.)
5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources)OD25383/2025-2026:Supply and installation of PONNY SPRING RIDER Descriptions Product Area : 1m x 0.5m (3.3ft X 1.6ft) Safe Play Area : 2m x 1.5m (6.5ft X 5ft) Ideal For : 3-6 Years ?Friends at a time : 1 Technical Specification: ?Pony :Pony is made up of rotational molding process. It has been provided with four bolts. Pony is bolted to the spring assembly.?Spring assembly :It consists of top plate, spring,footrest & square base plate suitably fixed to each other with U-Bolts. The Spring is made from En47/45 Spring Steel & the two plates are made from MS with GI plating for corrosion resistance. Rotational Molded Products : The ROTO products are manufactured using material LLDPE (Linear Low Density Polye

ot Dipped Galvanized Pipes with GI thickness upto 60micron. Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instrument.s. Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Colour or similar specifications approved by departmental officers at site,- OD25386/2025-2026:Supply and installation of FISH BIN Descriptions Product Area : 0.3m Dia. (1.3ft Dia.)?Height : 0.7m (2.6ft) Capacity : 84 Ltrs Technical Specification: Fish Bin : Fish bin is made up of Fiber reinforced plastic(FRP).This innovative fish dust-bin is designed for accomodating dry as well as wet kind of trash in the garden or public places.The fish dustbin has shape, size and parts that of a fish which looks like a real fish and the trash can be put through inside the mouth of the fish.FRP products :All the Fibre Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type.We use international quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required colour to the product.Thickness of the FRP material varies from 3 mm to 5 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test)b. Color or similar specifications approved by departmental officers at site,-,OD25387/2025-2026:Supply and Installation of UME SEE -SAW with Product Area : 1.85m X 0.45m (6ft X 1.4ft), Safe Play Area : 2.85m X1.45m (9.3ft X 4.8ft) Ideal For : 3-10 Years, Friends at a time : 2 with technical Specification: Handle grip: Hand Grip conforming to EN 1176-1:2015 for requirement of hand grip made from 20NB Galvanized pipe with end caps, See-saw lever: See Saw Lever made from 80NB Galvanized Pipe with strong load carrying capacity, Seat made from LLDPE by rotational moulding- 295x190x70mm Rotational molded seat with grip, See Saw stand with special Nylon-6 bush enclosed in a seamless pipe hinged to 50NB Support pipe, the stand is fixed with ISA for strong foundation grip, See Saw impact attenuator: is 1NO 31,125.00 31,125.00 6 made from 20NB Galvanized pipe, Bearing: heavy duty nylon bush, ROTO products manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic with thickness varies from 5 mm to 8 mm as per the product, pipes: Hot Dipped Galvanized Pipes with GI thickness of 60micron, powder coating: with pure polyester raw material, dry film Thickness maintained within the range of 50-70 microns tested for adhesion test with the help of cross hatch cutter instrument, Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps, all open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Color: Multicolor or similar specifications approved by departmental officers at site,çOD25388/2025-2026:Supply and Installation of ANIMAL GO ROUND Descriptions Product Area : 2.1m Dia (7 ft Dia.) Safe Play Area : 3.1m Dia (10.2 ft Dia.) ? Ideal For : 3-12 Years Friends at a time : 4 Technical Specification: MGR frame : MGR Frame made from 40NB pipes welded together with bottom end over a circular plate meant for assembling bearing assembly. The top end of the pipe is welded with a ISF & a plate for mounting the animal (duck) over it. The four 40NB pipe are hold together with four 25NB pipe to form a strong structure. Bearing assembly :Bearing assembly with two bearings Center support : 80NB hot dip galvanized center support pipe of length 500mm with GI thickness of 60 .This pipe is welded with a 150x150mm base plate at bottom for fixing the foundation angles ISA & Circular plate on top with OD 200mm for assembling 1NO 34,875.00 34,875.00 9 the bearing. Foot rest : Foot rest made from 15NB Galvanized pipe with end caps welded to two plates forming a foot rest. Duck : Duck is made out of molded plastic in rotational molding process . Rotational Molded Products :The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability. Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness upto 60micron. Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instruments. Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Color:or similar specifications approved by departmental officers at site, }OD25389/2025-2026:Supply and installation of HOPPER SPRING RIDER Descriptions Product Area : 1m x 0.5m (3.3ft X 1.6ft)Safe Play Area : 2m x 1.5m (6.5ft X 5ft)?Ideal For : 3-6 Years Friends at a time : 1 Technical Specification: Hopper :Hopper is made up of rotational molding process. It has been provided with four bolts. Hopper is bolted to the spring assembly.Spring assembly :It consists of top plate, spring, footrest & square base plate suitably fixed to each other with UBolts. The Spring is made from En47/45 Spring Steel & the two plates are made from MS with GI plating for corrosion resistance Rotational Molded Products : The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability.Foundation Stand :Foundation Stand made of 40NB Galvanized pipe with GI coated plates welded on both ends for fixing the square base on top and foundation angles at bottom.Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness upto 60micron. Pipe Materials or Class: Light Duty ('A' Class) & Medium Duty ('B' Class) Series of pipes only. Wall thickness of pipe varies according to class/Powder coating: It shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50- 70 microns. It is tested for Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Color: Multicolor for optional or customized & according to RAL shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrapr
OD25391/2025-2026:Supply and Installation of DOUBLE ARC SWING with Product Area : 3.2m x 1.5m (10.5ft x 5ft), Safe Play Area : 4.2m X 3.9m (13.8ft X 13ft) Ideal For : 4-14 Years, Friends at a time : 2 withTechnical Specification: Arc swimg frame :6000mm long 80NB, Pipe bent in Single Piece & welded together with a flange 5mm thick & ISA of 20X20x3mm to form a strong frame, The 80NB pipe is hot dip galvanized pipe with GI thickness of 60. Height of the frame is 2700mm, Top pipe : 50NB Top Pipe with two Arc Swing Flanges welded at both i

f the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect lend of uniform thickness & durability. Handle: Handle frame is made from 32NB and 25NB GI Pipe. Material used for handgrip is EPDM (ethylene propylene diene monomer) Rubber.Foot rest: 32NB GI material pipe is used for footrest. Bearing: Bearings are oil sealed, self-lubricated made of SKF/ NTN/ NACHI make shall be provided for smooth & trouble-free movement. Others: Internal lock to limit the movement Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 40- 60micron.Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instruments.Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Colour or similar specifications approved by departmental officers at site.oOD25396/2025-2026:Supply and installation of HIP TWISTER DOUBLE Descriptions Product Area : 1.2m x 0.9m (3.9ft x 3ft) Safe Play Area : 2.2m x 1.9m (9.85ft x 5.3ft) Ideal For : 13 Years & above Function:Stretches waist & Upper Body. Technical Specification: Main Support: The main support of Hip twister consist of 100NB G.I Pipe. Handle: 25NB Galvanized pipe bend to form handle of Hip Twister product. Footrest Bend Pipe: 40NB GI pipe is attached with main frame to form a foot rest having 130x50x5 thick plate Standing or Rotating Disc : Standing Disc of 300mm Dia round size shall be made of HDPE/Metal. 15mm thick Sheet and Plate 10mm thick for base support. Bearing: Bearings are oil sealed, self-lubricated made of SKF/ NTN/ NACHI make shall be provided for smooth & trouble-free movement. Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 60micron.Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instruments. Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Color or similar specifications approved by departmental officers at site,- õOD25397/2025-2026:Supply and installation of LEG PRESS DOUBLE STANDARD Descriptions Product Area : 2.05m X 0.5m (6.73Ft X 1.64Ft) Safe Play Area : 3.05m X 1.5m (10Ft X 5Ft) Function: Workout of thigh and calfs Strengthening Legs Technical Specification: Post Dia: 80NB GI main vertical support pipe of Leg Press Double is fixed over 10mm thick base plate. 10mm thick clamping plates are attached to main frame to hold the rest of assemblies. Seat frame: Seat Frame made from 40NB bend GI pipes and Material used for seat is HDPE (High Density Polyethylene) UV stabilised/LLDPE. This seat frame is mounted on vertical support pipe through specially designed bearing housings. Foot rest: Footrest support to be of 25NB G.I Pipe. The materials used for footrest is Aluminum casting/LLDPE/HDPE/Nylon. Bearing Housing shall be made from MS material. Bearing: Bearings are oil sealed, self-lubricated made of SKF/ NTN/ NACHI / FAG make shall be provided for smooth & trouble-free movement. Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 40-60micron. Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instruments. Nut and Bolts: Galvanized/S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate: ISO9001:2015 Color: Multicolor for optional or customized and as per RAL Shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. Note: Images are only for references. Actual Product or colour of the product may vary.³
OD25398/2025-2026:Providing and laying 36mm EPDM rubble flooring with colour pattern using 6mm virgin high polymer imported colored EPDM granules layer bonded with PU binder with appropriate ratio over a cushion layer of 30mm R grade rubber buffing bonded with dow PU binder laid over existing rough plastered concrete surface .Rate Including cost of PU Binder/Glue etc as required for the works,labour charges etc complete.¿OD25399/2025-2026:Providing and Stacking of GOLDEN BAMBOO -Phyllostachys Aurea, having ht. 90 cm to 1.20 m , well developed, fresh, and healthy as per the direction of the officer in-charge.§
OD25403/2025-2026:Finishing the front side of existing compound wall with art design paint as per drawing using Acrylic Smooth exterior paint of required shade, Two or more coat including applying additional coats wherever required applied over and including priming coat of exterior primer , to achieve even shade and colour, cost for scaffolding, charges for artist ,etc complete EST No. :OEO/TRIDA/EST/430/2025_5_1_1 ãOD25404/2025-2026:2 - seater portable toilet 890mm X 840mm X 1980mm (for 1- seater) with Sludge tank(Capacity 200 Ltrs) with 75mm outlet facility through butterfly valve and hosepipe(for 1-seater and 2-seater) from GEM softwareÓOD25436/2025-2026:Supplying and Providing Victoria bench (150cm x 60 cm), with FRP streap 3 seater heavy duty garden bench for outdoor powder coated for a smooth finish washable and waterproof ,wooden finish .
OD25437/2025-2026:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench 40/32 mm or nearest size
OD25438/2025-2026:Providing Cast Iron Bollards with approved drawings and design including cost of all materials, moulding charges , cost of fixtures and all labour charges etc. complete from approved estimate EST No. :IRR/IA/EST/1459/2022_5_6_6 (Edit Id : 5)s
OD25439/2025-2026:Supplying and fixing best quality Fiber mugappu,moulded type approved colour and fixing end of common rafter to lines and levels including all cost and conveyance of all materials and labour charges for fixing etc. complete as per the direction of departmental officers at site from approved estimate EST No. :IRR/IA/EST/1459/2022_5_6_6 (Edit Id : 5))OD25440/2025-2026:Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-ChargeJOD25457/2025-2026:Driving down RCC piles of 300mm square in size to the required depth in line and levels to safe working loads, including shifting the casted piles to the driving spot without damaging the pile with necessary lifting equipments, placing in correct position to line and driving down to required depth with the help of driving equipment including hire charges for driving equipment, machinery,planks, fuels, labour charges etc complete as per the direction of the departmental officers at site from approved estimate EST No. :IRR/IA/EST/1459/2022_5_6_6 (Edit Id : 5)®
OD25458/2025-2026:Chipping the top of RCC piles to required line and level by mechanical/manual means without damaging the remaining part of the pile and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including c

utting reinforcement bars. from approved estimate EST No. :IRR/IA/EST/1459/2022_5_6_6 (Edit Id : 5) ÐOD25455/2025-2026:Providing and fixing 50mm GI pipe embedded in cement concrete for fencing including cost of GI pipe and fixing charge of GI pipe etc complete as directed by the departmental officers at site*
4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)ÑOD25453/2025-2026:Supplying and fixing angle iron, M S Flat etc... to G I post including all cost of welding drilling hole etc... for fixing G. I. chain link as per directions of departmental officers at site.¿OD25454/2025-2026:supplying at site steel galvanized steel bolts and nuts 10mm dia and 125mm long round head with slots etc complete as per the direction of the departmental officers at site.Z
16.70.2:Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge.Made of G.I wire of dia 4 mm. PVC coated to achieve outer dia. not less than 5 mm in required colour and shade
OD27585/2025-2026:Providing Colour coated Asphalt roofing Shingles including sufficient length of ridge pieces as roof covering for boat jetty roof neatly laid and water proofing the roof full as per the direction of departmental officers at site EST No. :IRR/KP/EST/1415/2023_5_1_1úOD27586/2025-2026:Name board of size 75x60 cm installed in the apropriate place visible to the public made of brick wall with granite plaque should be inserted and engraving letters etc complete as per the direction of departmental officers at site¨OD27587/2025-2026:Providing and stacking of Trothic Ixora/Chethi Plant of height 20 cm to 30 cm at site including conveyance as per direction of the officer-in-charge.‘OD27588/2025-2026:Lum sum provision for Enhancing the surface with artistic paintings, such as Artera -style art, to improve its aesthetic appeal¤OD27589/2025-2026:Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work“
OD27590/2025-2026:Providing and fixing approved coloured, branded AC Strip Light with Waterproof (IP65 rating), 6W and 120 LEDS per Meter for prefect ambience, superior life and quality withstanding harsh weather. Applicable for bendable or angled patterns, or in continu

敤൤琊杯瑥敨⁲楷桴愠映慬杮⁥潴映牯⁡瑳潲杮映慲敭眠瑩獨慴摮戠瑯⁨桴⁥楰捴楨杮☠礠睡湩⁧潭敭瑮മ吊敨㠠丰⁂楰数椠⁳潨⁴楤⁰慧癬湡穩摥瀠灩⁥景栠楥桧⁴㌴〸浭眠瑩⁨䥇琠楨正敮獳甠瑰〶㼮汃浡獰਍›睔〸㉸‰楳敺⁤汣浡獰樠楯敮⁤潴敧桴牥琠睴〸䉎挠慬灭⁳楷桴渠湯爠獵楴杮渠瑵ⴠ潢瑬⁳慭敤਍牦浯丠汹湯䜠慲敤㘭瀠慬瑳捩‮桃楡›潈⁴楄⁰慇癬湡穩摥挠慨湩漠⁦楤⁡洸湡⁤敬杮桴㌠〳浭਍潴爠獥獩⁴潭敶敭瑮漠⁦慰⁤湩瘠牥楴慣楤敲瑣潩…污潬楷杮洠瑯潩景瀠摡椠楢愭楸污搠物捥楴湯മ匊栠潯›ⵓ佈䭏椠⁳慭敤甠⁰景匠⁓〳‴慭整楲污眠楨档椠⁳獵摥映牯洠畯瑮湩⁧桴⁥楤捳⁳潴琠敨਍汣浡獰瀠潲楶敤⁤瑡琠敨琠灯瀠灩⁥湡⁤污潳映牯挠慬灭湩⁧瑩眠瑩⁨档楡⹮䐠獩⁣慰⁤›桔⁥楤捳瀠摡൳愊敲洠摡⁥湩爠瑯瑡潩慮潭摬湩⹧吠敨瀠摡椠⁳楦瑴摥漠瑮卍挠物汣⁥景㔠洠桴捩楷桴䜠⁉汰瑡湩⹧਍桔⁥汰瑡⁥獩朠潲湵敤⁤楷桴愠䜠⁉档楡湡⁤㔲丠⁂䥇瀠灩獥愠瑴捡敨⁤潴椠⹴删瑯瑡潩慮潍摬摥਍牐摯捵獴㨠吠敨删呏⁏牰摯捵獴愠敲洠湡晵捡畴敲⁤獵湩⁧慭整楲污䰠䑌䕐⠠楌敮牡䰠睯䐠湥楳祴਍潐祬瑥票敬敮 楷桴唠⁖瑳扡汩穩瑡潩景䘠潯⁤片摡⁥潎慈慺摲畯⁳汐獡楴⁣‮桔捩湫獥⁳景琠敨਍佒佔瀠潲畤瑣⁳慶楲獥映潲‵浭琠‸浭愠⁳数⁲桴⁥牰摯捵⹴吠敨漠敶慲汬瀠潲畤瑣漠瑢楡獩愠਍敳浡敬獳琠湥畳敲瀠牥敦瑣戠敬摮漠⁦湵晩牯桴捩湫獥⁳…畤慲楢楬祴‮桔獩瀠潲畤瑣椠⁳潳搠獥杩敮൤猊獡琠敤敶潬⁰桰獹捩污眠汥敢湩⁧景琠敨挠楨摬愠摮琠湩牣慥敳瀠票楳慣扡汩瑩敩⹳倠灩獥›汁൬洊瑥污瀠灩獥愠敲䠠瑯䐠灩数⁤慇癬湡穩摥倠灩獥眠瑩⁨䥇琠楨正敮獳甠瑰〶業牣湯‮潐摷牥਍潣瑡湩㩧䤠⁴桳污敢搠湯⁥楷桴瀠牵⁥潰祬獥整⁲慲⁷慭整楲污‮牄⁹楦浬吠楨正敮獳洠楡瑮楡敮൤眊瑩楨桴⁥慲杮⁥景㔠ⴰ〷洠捩潲獮‮瑉椠⁳整瑳摥映牯愠桤獥潩整瑳眠瑩⁨桴⁥敨灬漠⁦牣獯⁳慨捴൨挊瑵整⁲湩瑳畲敭瑮献‮畎⁴湡⁤潂瑬㩳䜠污慶楮敺⽤匠匮⼮汁敬潂瑬䈯瑵潴效摡䄠汬湥䈠汯⁴…畎獴਍ 祎潬潌正丠瑵⁳牡⁥獵摥眠瑩⁨噐⁃潂瑬䌠灡⹳䄠汬漠数湥獤漠⁦楰数戠敥汣獯摥戠⁹䥇⼠਍噐⁃慣獰映牯甠敳⁲慳敦祴愠慧湩瑳攠瑮慲浰湥⹴਍潃潬牵漠⁲楳業慬⁲灳捥晩捩瑡潩獮愠灰潲敶⁤祢搠灥牡浴湥慴景楦散獲愠⁴楳整⴬ج伀㉄〸ㄵ㈯㈰ⴵ〲㘲区灵汰⁹湡⁤湉瑳污慬楴湯漠⁦䵕⁅䕓⁅匭坁眠瑩⁨牐摯捵⁴牁慥㨠ㄠ㠮洵堠〠㐮洵⠠昶⁴⁘⸱昴⥴ബ匊晡⁥汐祡䄠敲⁡›⸲㔸ㅘ㐮洵⠠⸹昳⁴⁘⸴昸⥴䤠敤污䘠牯㨠㌠ㄭ‰教牡ⱳ䘠楲湥獤愠⁴⁡楴敭㨠㈠眠瑩൨琊捥湨捩污匠数楣楦慣楴湯›慈摮敬朠楲㩰䠠湡⁤片灩挠湯潦浲湩⁧潴䔠⁎ㄱ㘷ㄭ㈺㄰‵潦൲爊煥極敲敭瑮漠⁦慨摮朠楲⁰慭敤映潲〲䉎䜠污慶楮敺⁤楰数眠瑩⁨湥⁤慣獰‬敓ⵥ慳⁷敬敶㩲匠敥਍慓⁷敌敶⁲慭敤映潲〸䉎䜠污慶楮敺⁤楐数眠瑩⁨瑳潲杮氠慯⁤慣牲楹杮挠灡捡瑩ⱹ匠慥⁴慭敤਍牦浯䰠䑌䕐戠⁹潲慴楴湯污洠畯摬湩ⵧ㈠㔹ㅸ〹㝸洰潒慴楴湯污洠汯敤⁤敳瑡眠瑩⁨牧灩‬敓൥匊睡猠慴摮眠瑩⁨灳捥慩祎潬⵮‶畢桳攠据潬敳⁤湩愠猠慥汭獥⁳楰数栠湩敧⁤潴㔠丰⁂畓灰牯⁴楰数ബ琊敨猠慴摮椠⁳楦數⁤楷桴䤠䅓映牯猠牴湯⁧潦湵慤楴湯朠楲Ɒ匠敥匠睡椠灭捡⁴瑡整畮瑡牯›獩ㄠ低਍ㄳㄬ㔲〮‰ㄳㄬ㔲〮‰‶慭敤映潲〲䉎䜠污慶楮敺⁤楰数‬敂牡湩㩧栠慥祶搠瑵⁹祮潬畢桳ബ刊呏⁏牰摯捵獴洠湡晵捡畴敲⁤獵湩⁧慭整楲污䰠䑌䕐⠠楌敮牡䰠睯䐠湥楳祴倠汯敹桴汹湥⥥眠瑩൨唊⁖瑳扡汩穩瑡潩景䘠潯⁤片摡⁥潎慈慺摲畯⁳汐獡楴⁣楷桴琠楨正敮獳瘠牡敩⁳牦浯㔠洠潴㠠਍浭愠⁳数⁲桴⁥牰摯捵ⱴ瀠灩獥›潈⁴楄灰摥䜠污慶楮敺⁤楐数⁳楷桴䜠⁉桴捩湫獥⁳景㘠洰捩潲Ɱ਍潰摷牥挠慯楴杮›楷桴瀠牵⁥潰祬獥整⁲慲⁷慭整楲污‬牤⁹楦浬吠楨正敮獳洠楡瑮楡敮⁤楷桴湩琠敨਍慲杮⁥景㔠ⴰ〷洠捩潲獮琠獥整⁤潦⁲摡敨楳湯琠獥⁴楷桴琠敨栠汥⁰景挠潲獳栠瑡档挠瑵整⁲湩瑳畲敭瑮ബ上瑵愠摮䈠汯獴›慇癬湡穩摥 ⹓⹓䄯汬湥䈠汯⽴畂瑴湯䠠慥⁤汁敬潂瑬☠丠瑵⁳ 祎潬潌正丠瑵൳愊敲甠敳⁤楷桴倠䍖䈠汯⁴慃獰‬污灯湥攠摮⁳景瀠灩⁥敢湥挠潬敳⁤祢䜠⁉ 噐⁃慣獰映牯甠敳൲猊晡瑥⁹条楡獮⁴湥牴灡敭瑮‮潃潬㩲䴠汵楴潣潬⁲牯猠浩汩牡猠数楣楦慣楴湯⁳灡牰癯摥戠൹搊灥牡浴湥慴景楦散獲愠⁴楳整쬬 䑏㠲㔰⼲〲㔲㈭㈰㨶畓灰祬愠摮䤠獮慴汬瑡潩景䘠偒删䱏䕌⁒䱓䑉⁅䘵䑔獥牣灩楴湯⁳牐摯捵⁴牁慥㨠㔠㘮⁸⸱洰਍ㄨ⸸昴⁴⁸⸳昳⥴匠晡⁥汐祡䄠敲⁡›⸶洶砠㈠〮ㄨ⸸昷⁴⁸⸶昶⥴䄠敧䜠潲灵㨠㐠ㄭ‰特⹳䘠楲湥獤愠⁴ൡ琊浩⁥›‴潴㔠吠捥湨捩污匠数楣楦慣楴湯›浓污ⵈ畓灰牯㩴䤠⁴獩洠摡⁥牦浯㈠丵⁂䥇倠灩⁥敬杮桴਍〶洰楷桴ㄠ洰潴⁲潲⁤景氠湥瑧⁨〳‰浭映牯猠灵潰瑲☠猠牴湯⁧潦湵慤楴湯䌠湥整⁲畓灰牯൴瀊灩㩥㠠丰⁂潨⁴楤⁰慧癬湡穩摥䐠捥楰数漠⁦敬杮桴ㄠ㠹洰楷桴䜠⁉桴捩湫獥⁳景㘠ര洊捩潲獮䰠摡敤⁲牆浡㩥吠敨猠楬敤氠摡敤⁲獩洠摡⁥灵漠⁦㔲丠⁂䥇瀠灩⁥…桴⁥慬摤牥栠湡ⵤ慲汩湩൧椊⁳慭敤甠⁰景ㄠ‵䉎愠摮㈠‰䉎瀠灩獥爠獥数瑣癩汥⹹䰠摡敤⁲瑓灥›潃摬映牯敭⁤㘱䜠畡敧䜠൉倊慬整⁤桓敥⁴敌杮桴㔠〰浭☠眠摩桴㤠洰久ㄱ㘷‭㨱㤱㠹挠湯潦浲湩⁧潴䔠ㅎ㜱ⴶㄠㄺ㤹⸸਍桔⁥牴摡⁥湡⁤楲敳⁲景琠敨氠摡敤⁲牡⁥敤楳湧摥椠畳档愠眠祡椠⁴潷瑮攠瑮慲⁰档汩獤映潯⁴桷汩൥瀊慬楹杮‮汁桴⁥桳牡⁰摥敧⁳湡⁤潣湲牥⁳牡⁥牰灯牥祬朠楲摮摥琠楧敶猠潭瑯⁨楦楮桳猠桴瑡਍档汩牤湥愠敲渠瑯栠牵⁴桷汩⁥汰祡湩⁧湯椠⹴倠慬晴牯㩭䤠⁴獩ㄠ‶坓⁇䥇倠慬整⁤汐瑡潦浲漠⁦楳敺ⴠ਍〵砰㔴砰〶浭倠灩獥›汁敭慴楰数⁳牡⁥潈⁴楄灰摥䜠污慶楮敺⁤楐数⁳楷桴䜠⁉桴捩湫獥⁳景਍〶業牣湯䘮偒删汯敬⁲汓摩⁥慬摮湩㩧䤠⁴獩䘠偒删汯敬⁲汓摩⁥慬摮湩⁧楷桴猠灵潰瑲映慬杮獥漠⁦卉ു挊湯潦浲湩⁧潴猠慴摮牡獤䤠ⵓ〸ⴸ㤱㐶☠椠⁴獩洠摡⁥灵漠⁦楆敢⁲敒湩潦捲摥倠慬瑳捩⠠剆⥐剆൐刊汯敬⁲汓摩⁥楳敤愠浲›瑉䤠⁳慭敤甠⁰景䘠扩牥删楥普牯散⁤汐獡楴⁣䘨偒 楷桴爠楥普牯散⁤楰獮映牯਍獡敳扭楬杮琠敨爠汯敬獲䘠偒删汯敬⁲汓摩⁥潴㩰䤠⁴獉洠摡⁥灵漠⁦楆敢⁲敒湩潦捲摥倠慬瑳捩਍䘨偒倩灩獥›汁敭慴楰数⁳牡⁥潈⁴楄灰摥䜠污慶楮敺⁤楐数⁳楷桴䜠⁉桴捩湫獥⁳景਍〶業牣湯刮汯敬㩲䤠⁴獩洠摡⁥牦浯䰠䑌䕐⠠楌敮牡䰠睯䐠湥楳祴倠汯敹桴汹湥⥥䴠瑡牥慩⹬吠敨਍潭瑳愠瑴慲瑣癩⁥湡⁤湥潪慹汢⁥景椠獴欠湩Ɽ琠敨猠楬敤挠畨整挠湯楳瑳⁳景洠汯敤⁤汰獡楴⁣潲汬牥൳猊牰慥⁤癯牥琠敨氠湥瑧⹨䤠⁴獩洠摡⁥湩爠瑯瑡潩慮潭摬湩⹧潆⁲潒潴瀠潲畤瑣›桔⁥佒佔瀠潲畤瑣൳愊敲洠湡晵捡畴敲⁤獵湩⁧慭整楲污䰠䑌䕐⠠楌敮牡䰠睯䐠湥楳祴倠汯敹桴汹湥⥥眠瑩⁨噕਍瑳扡汩穩瑡潩景䘠潯⁤片摡⁥潎慈慺摲畯⁳汐獡楴⁣潣灭汩摥琠佒午‮桔捩湫獥⁳景琠敨删呏൏瀊潲畤瑣⁳慶楲獥映潲‵浭琠‸浭愠⁳数⁲桴⁥牰摯捵⹴吠敨漠敶慲汬瀠潲畤瑣漠瑢楡獩愠猠慥汭獥⁳潴攠獮牵⁥数晲捥⁴敬摮漠⁦湵晩牯桴捩湫獥⁳…畤慲楢楬祴‮潆⁲剆⁐牰摯捵㩴䄠汬琠敨䘠扩牥਍敒湩潦捲摥倠慬瑳捩⁳䘨偒 慭整楲污⁳牡⁥牰捯獥敳⁤祢琠敨栠湡⁤慬摩瀠潲散獳眠楨档椠⁳潣獮摩牥摥਍潴戠⁥桴⁥敢瑳漠⁦瑩⁳祴数‮敗甠敳椠瑮牥慮楴湯污焠慵楬祴漠⁦敇潣瑡⁳桷捩⁨獩搠汵⁹業數⁤楷桴਍⹕⁖瑳扡汩穩摥瀠杩敭瑮琠楧敶琠敨爠煥極敲⁤潣潬牵琠桴⁥牰摯捵⹴吠楨正敮獳漠⁦桴⁥剆൐洊瑡牥慩慶楲獥映潲″浭琠‵浭愠⁳数⁲桴⁥牰摯捵⹴吠敨䘠偒洠瑡牥慩獩琠獥整⁤潦⁲扡慲楳湯਍敲楳瑳湡散☠唠協⠠汵楴慭整琠湥楳敬琠獥⥴倮睯敤⁲潣瑡湩㩧䤠⁴桳污敢搠湯⁥景瀠牵⁥潰祬獥整൲攊瑸牥潩獲甠瑬慲‭瑳扡汩穩摥瀠睯敤⁲慐湩獴‮桔捩湫獥⁳慭湩慴湩摥椠⁳⁡業楮畭景㘠ⴰ〷਍業牣湯⹳畎⁴湡⁤潂瑬㩳䜠污慶楮敺⽤匠匮⼮汁敬潂瑬䈯瑵潴效摡䄠汬湥䈠汯⁴…畎獴⼠丠汹湯਍潌正丠瑵⁳牡⁥獵摥眠瑩⁨噐⁃潃潬㩲潃潬牵漠⁲楳業慬⁲灳捥晩捩瑡潩獮愠灰潲敶⁤祢搠灥牡浴湥慴൬漊晦捩牥⁳瑡猠瑩ⱥ‭畍瑬捩汯牯映牯漠瑰潩慮牯畣瑳浯穩摥倠捡慫楧杮›慓敦祴㌠氠祡牥瀠捡慫楧杮氠歩൥ㄊ瑳䔠䕐䘠慯渲⁤䑈䕐䘠汩湡⁤爳⁤獩匠牴瑥档眠慲⹰਍潂瑬䌠灡⹳䄠汬漠数湥獤漠⁦楰数戠敥汣獯摥戠⁹䥇⼠倠䍖挠灡⁳潦⁲獵牥猠晡瑥⁹条楡獮൴攊瑮慲浰湥⹴䌠牥楴楦慣整›潃潬牵漠⁲楳業慬⁲灳捥晩捩瑡潩獮愠灰潲敶⁤祢搠灥牡浴湥慴景楦散獲愠൴猊瑩ⱥ䑏㠲㔰⼳〲㔲㈭㈰㨶畓灰祬愠摮䤠獮慴汬瑡潩景䄠䥎䅍⁌佇删問䑎䐠獥牣灩楴湯⁳倠潲畤瑣䄠敲⁡›⸲洱䐠慩⠠‷瑦਍楄⹡ 匠晡⁥汐祡䄠敲⁡›⸳洱䐠慩⠠〱㈮映⁴楄⹡ ‿摉慥潆⁲›ⴳ㈱夠慥獲†牆敩摮⁳瑡愠琠浩⁥›ഴ吊捥湨捩污匠数楣楦慣楴湯›䝍⁒牦浡⁥›䝍⁒牆浡⁥慭敤映潲〴䉎瀠灩獥眠汥敤⁤潴敧桴牥਍楷桴戠瑯潴湥⁤癯牥愠挠物畣慬⁲汰瑡⁥敭湡⁴潦⁲獡敳扭楬杮戠慥楲杮愠獳浥汢⹹吠敨琠灯攠摮漠൦琊敨瀠灩⁥獩眠汥敤⁤楷桴愠䤠䙓☠愠瀠慬整映牯洠畯瑮湩⁧桴⁥湡浩污⠠畤正 癯牥椠⹴吠敨映畯⁲〴䉎਍楰数愠敲栠汯⁤潴敧桴牥眠瑩⁨潦牵㈠丵⁂楰数琠潦浲愠猠牴湯⁧瑳畲瑣牵⹥䈠慥楲杮愠獳浥汢൹㨊敂牡湩⁧獡敳扭祬眠瑩⁨睴敢牡湩獧䌠湥整⁲畳灰牯⁴›〸䉎栠瑯搠灩朠污慶楮敺⁤散瑮牥猠灵潰瑲਍楰数漠⁦敬杮桴㔠〰浭眠瑩⁨䥇琠楨正敮獳漠⁦〶⸠桔獩瀠灩⁥獩眠汥敤⁤楷桴愠ㄠ〵ㅸ〵浭戠獡൥瀊慬整愠⁴潢瑴浯映牯映硩湩⁧桴⁥潦湵慤楴湯愠杮敬⁳卉⁁…楃捲汵牡瀠慬整漠潴⁰楷桴传⁄〲洰൭昊牯愠獳浥汢湩⁧丱⁏㐳㠬㔷〮‰㐳㠬㔷〮‰‹桴⁥敢牡湩⹧䘠潯⁴敲瑳㨠䘠潯⁴敲瑳洠摡⁥牦浯ㄠ丵ൂ䜊污慶楮敺⁤楰数眠瑩⁨湥⁤慣獰眠汥敤⁤潴琠潷瀠慬整⁳潦浲湩⁧⁡潦瑯爠獥⹴䐠捵›畄正椠⁳慭敤਍畯⁴景洠汯敤⁤汰獡楴⁣湩爠瑯瑡潩慮潭摬湩⁧牰捯獥⁳‮潒慴楴湯污䴠汯敤⁤牐摯捵獴㨠桔⁥佒佔਍牰摯捵獴愠敲洠湡晵捡畴敲⁤獵湩⁧慭整楲污䰠䑌䕐⠠楌敮牡䰠睯䐠湥楳祴倠汯敹桴汹湥⥥眠瑩⁨噕਍瑳扡汩穩瑡潩景䘠潯⁤片摡⁥潎慈慺摲畯⁳汐獡楴⹣吠楨正敮獳漠⁦桴⁥佒佔瀠潲畤瑣⁳慶楲獥਍牦浯㔠洠潴㠠洠獡瀠牥琠敨瀠潲畤瑣‮桔⁥癯牥污牰摯捵⁴扯慴湩椠⁳⁡敳浡敬獳琠湥畳敲਍数晲捥⁴汢湥⁤景甠楮潦浲琠楨正敮獳☠搠牵扡汩瑩⹹倠灩獥›汁敭慴楰数⁳牡

Hot Dipped Galvanized Pipes with GI thickness upto 60micron. Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instruments. Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Color:or similar specifications approved by departmental officers at site, }OD28054/2025-2026:Supply and installation of HOPPER SPRING RIDER Descriptions Product Area : 1m x 0.5m (3.3ft X 1.6ft)Safe Play Area : 2m x 1.5m (6.5ft X 5ft)?Ideal For : 3-6 Years Friends at a time : 1 Technical Specification: Hopper :Hopper is made up of rotational molding process. It has been provided with four bolts. Hopper is bolted to the spring assembly.Spring assembly :It consists of top plate, spring, footrest & square base plate suitably fixed to each other with UBolts. The Spring is made from En47/45 Spring Steel & the two plates are made from MS with GI plating for corrosion resistance Rotational Molded Products : The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability.Foundation Stand :Foundation Stand made of 40NB Galvanized pipe with GI coated plates welded on both ends for fixing the square base on top and foundation angles at bottom.Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness upto 60micron. Pipe Materials or Class: Light Duty ('A' Class) & Medium Duty ('B' Class) Series of pipes only. Wall thickness of pipe varies according to class/Powder coating: It shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50- 70 microns. It is tested for Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Color: Multicolor for optional or customized & according to RAL shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrapOD28055/2025-2026:Supply and installation of PONNY SPRING RIDER Descriptions Product Area : 1m x 0.5m (3.3ft X 1.6ft) Safe Play Area : 2m x 1.5m (6.5ft X 5ft) Ideal For : 3-6 Years ?Friends at a time : 1 Technical Specification: ?Pony :Pony is made up of rotational molding process. It has been provided with four bolts. Pony is bolted to the spring assembly.?Spring assembly :It consists of top plate, spring,footrest & square base plate suitably fixed to each other with U-Bolts. The Spring is made from En47/45 Spring Steel & the two plates are made from MS with GI plating for corrosion resistance. Rotational Molded Products : The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability.Foundation Stand :Foundation Stand made of 40NB Galvanized pipe with GI coated plates welded on both ends for fixing the square base on top and foundation angles at bottom.Pipes: All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness upto 60micron.Pipe Materials or Class: Light Duty ('A' Class) & Medium Duty ('B' Class) Series of pipes only. Wall thickness of pipe varies according to class / series of pipe used.Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments. Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Color: Multicolor for optional or customized & according to RAL shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap $
OD28060/2025-2026:Supply and installation of DELUXE SWING Descriptions" Product Area : 2.8m X 1.9m (9.2ft X 6.2ft)" Safe Area : 3.8m X 2.9m (12.5ft X 9.5ft) " Friends at a time : 3 Adults Technical Specification:" Leg pipe :40NB hot dip galvanized swing leg pipe of length 2950mm with GI thickness of 60." Top pipe :50NB hot dip galvanized swing top pipe of length 1895mm with GI thickness of 60 with an ISF conforming to IS 1730-1961 welded at its both ends to junction box. Pipe can withstand torsional stress created du to swinging motion." Junction box :225mmx103mm junction box made from 3mm thick GI Plated plate to house the two swing leg pipes, top pipe & roof frame." Swing clamp assembly :Swing clamps made up of two parts are joined together with M6 Allen bolts along with S-Hook & a specially designed swing pin. The S-Hook is specially designed to house a bearing for smooth & noiseless swinging. The clamps are made from injection molded Nylon-6 plastic." Chain :Rubber dip molded swing chain of dia 6mm." Hook :S-Hook of dia 8mm of Grad SS 304.
OD28061/2025-2026:Supply and installation of DISC CHALLENGER (PGTH-01) Descriptions" Product Area : 4.5m X 1.1m (14.8ft X 3.6ft)" Safe Play Area : 5.5m X2.1m (18ft X 7ft)" Ideal For : 5-12 Years" Friends at a time : 5-6 Technical Specification:" Vertical support : 80NB Pipe welded together with a flange to form a strong frame withstand both the pitching & yawing moment. The 80NB pipe is hot dip galvanized pipe of height 2950mm with GI thickness upto 60." Top frame : 80NB Pipe welded together with a flange to form a strong frame withstand both the pitching & yawing moment. The 80NB pipe is hot dip galvanized pipe of height 4380mm with GI thickness upto 60. " Clamps : Two 80x20 sized clamps joined together to two 80NB clamps with non rusting nut - bolts made from N

ylon Grade-6 plastic.•Chain : Hot Dip Galvanized chain of dia 8mm and length 330mm to resist movement of pad in vertical direction & allowing motion of pad in biaxial direction.•S hook : S-HOOK is made up of SS 304 material which is used for mounting the disc’s to the clamps provided at the top pipe and also for clamping it with chain.•Disc pad : The disc pads are made in rotational molding. The pad is fitted onto MS circle of 5 mm thick with GI plating. The plate is grounded with a GI chain and 25 NB GI pipes attached to it.•Rotational Molded Products : The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UVstabilization of Food Grade Non Hazardous Plastic . Thickness of the ROTO products varies from 5 mm to 8 mmas per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability.•This product is so designed so as to develop physical well being of the child and to increase physical abilities.•Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness upto 60micron.•Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instrument.s.•Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate: ISO9001:2015 Color: Multicolor for optional or customized & according to RAL shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. Colour or similar specifications approved by departmental officers at site,-Ꮳ企䐀㈀㠀 㘀㈀⼀㈀ ㈀㔀ⴀ㈀ ㈀㘀㨀匀甀瀀瀀氀礀 愀渀搀 䤀渀猀琀愀氀氀愀琀椀漀渀 漀昀 䴀䄀倀匀 㜀㄀ 眀椀琀栀 倀爀漀搀甀挀琀 䄀爀攀愀 㨀 ㈀㈀昀琀 堀 ㈀ 昀琀Ⰰ 匀愀昀攀 倀氀愀礀 䄀爀攀愀 㨀 ㈀㠀昀琀 堀ഀ਀㈀㜀昀琀Ⰰ 愀最攀 䜀爀漀甀瀀 㨀 㔀ⴀ㄀㈀ 礀爀猀Ⰰ 昀爀椀攀渀搀猀 愀琀 愀 琀椀洀攀 㨀 ㄀㈀Ⰰ 瀀氀愀琀昀漀爀洀 䠀攀椀最栀琀 㨀 㔀昀琀 眀椀琀栀 琀攀挀栀渀椀挀愀氀ഀ਀匀瀀攀挀椀昀椀挀愀琀椀漀渀㨀 倀氀愀琀昀漀爀洀㨀ⴀ䴀愀琀攀爀椀愀氀㨀ⴀ 䘀刀倀 ⠀䘀椀戀攀爀 刀攀椀渀昀漀爀挀攀搀 倀氀愀猀琀椀挀⤀ 眀椀琀栀 愀渀琀椀ⴀ猀欀椀搀 猀甀爀昀愀挀攀 漀渀 琀漀瀀ഀ਀眀椀琀栀 洀椀渀椀洀甀洀 琀栀椀挀欀渀攀猀猀 漀昀 ㌀ⴀ㔀 洀洀 愀渀搀 猀椀搀攀 昀氀愀渀最攀猀 漀昀 㘀ⴀ㠀 洀洀 琀栀椀挀欀渀攀猀猀 挀攀渀琀攀爀 琀漀 挀攀渀琀攀爀ഀ਀搀椀猀琀愀渀挀攀 ㄀㄀㘀 洀洀Ⰰ 伀琀栀攀爀猀㨀ⴀ 刀椀戀戀攀搀 猀琀爀甀挀琀甀爀攀 漀渀 戀漀琀琀漀洀 猀椀搀攀 匀栀愀瀀攀㨀ⴀ 䠀攀砀愀最漀渀愀氀 䈀爀愀稀椀渀最ഀ਀䘀爀愀洀攀㨀ⴀ 䤀匀䄀 ㈀㔀砀㈀㔀砀㔀洀洀 琀栀椀挀欀 愀渀搀 䤀匀䘀 㐀 砀㔀洀洀 琀栀椀挀欀 眀栀椀挀栀 椀猀 最愀氀瘀愀渀椀稀攀搀 愀渀搀 琀栀攀渀 搀甀氀礀ഀ਀倀漀眀搀攀爀 䌀漀愀琀攀搀Ⰰ 挀氀愀洀瀀㨀ⴀ 洀愀搀攀 戀礀 一礀氀漀渀 㘀 洀愀琀攀爀椀愀氀 戀礀 䤀渀樀攀挀琀椀漀渀 䴀漀氀搀椀渀最 倀爀漀挀攀猀猀Ⰰ 瘀攀爀琀椀挀愀氀ഀ਀倀椀瀀攀猀㨀ⴀ ㄀ 一䈀 䜀䤀 瀀椀瀀攀猀Ⰰ 眀愀氀氀 琀栀椀挀欀渀攀猀猀 愀猀 瀀攀爀 琀栀攀 挀氀愀猀猀 漀昀 瀀椀瀀攀 甀猀攀搀 䘀刀倀 䰀愀搀搀攀爀 㔀昀琀㨀ⴀ 匀椀稀攀㨀ⴀ 㔀ഀ਀䘀琀Ⰰ 洀愀琀攀爀椀愀氀㨀ⴀ 䘀刀倀 ⠀䘀椀戀攀爀 刀攀椀渀昀漀爀挀攀搀 倀氀愀猀琀椀挀⤀ 眀椀琀栀 愀 洀椀渀椀洀甀洀 琀栀椀挀欀渀攀猀猀 漀昀 ㌀ⴀ㔀洀洀Ⰰ 琀栀攀 氀愀搀搀攀爀ഀ਀猀甀瀀瀀漀爀琀攀搀 戀礀 猀琀愀渀搀 洀愀搀攀 甀瀀 漀昀 ㈀㔀一䈀 䜀⸀䤀⸀ 瀀椀瀀攀 愀渀搀 㔀 砀㄀ 洀洀 琀栀椀挀欀 昀氀愀琀 昀爀漀洀 琀栀攀 戀漀琀琀漀洀Ⰰ 爀漀琀漀ഀ਀搀漀甀戀氀攀 圀愀瘀攀 匀氀椀搀攀 㔀ᤀ栠琀㨀 刀伀吀伀 䐀漀甀戀氀攀 圀愀瘀攀 匀氀椀搀攀 椀猀 洀愀搀攀 甀瀀 漀昀 䰀䰀䐀倀䔀 戀礀 刀漀琀愀琀椀漀渀愀氀ഀ਀䴀漀氀搀椀渀最 倀爀漀挀攀猀猀Ⰰ 氀愀渀搀椀渀最 漀昀 琀栀攀 猀氀椀搀攀 椀猀 猀甀瀀瀀漀爀琀攀搀 戀礀 猀琀愀渀搀 洀愀搀攀 甀瀀 漀昀 ㈀ 一䈀 瀀椀瀀攀 愀渀搀 㔀洀洀ഀ਀琀栀椀挀欀 䴀匀 瀀氀愀琀攀 眀椀琀栀 䜀䤀 瀀氀愀琀椀渀最Ⰰ 刀伀吀伀 匀瀀椀爀愀氀 匀氀椀搀攀 圀椀琀栀 匀氀椀搀攀 䔀渀琀爀礀㨀ⴀ 吀栀攀 猀氀椀搀攀 椀猀 挀漀洀瀀氀攀琀攀氀礀ഀ਀洀愀搀攀 甀瀀 漀昀 漀渀攀 瀀椀攀挀攀 眀椀琀栀 愀 琀栀椀挀欀渀攀猀猀 漀昀 㔀ⴀ 㠀洀洀 欀攀攀瀀椀渀最 椀渀 挀漀渀猀椀搀攀爀愀琀椀漀渀 琀栀攀 䄀匀吀䴀 ☀ 䔀一ഀ਀猀琀愀渀搀愀爀搀猀 眀椀琀栀 洀愀琀攀爀椀愀氀 甀猀攀搀 椀猀 䰀䰀䐀倀䔀 ⠀䰀漀眀ⴀ 䐀攀渀猀椀琀礀 倀漀氀礀攀琀栀礀氀攀渀攀 倀氀愀猀琀椀挀⤀ 椀渀 爀漀琀愀琀椀漀渀愀氀ഀ਀洀漀氀搀椀渀最 瀀爀漀挀攀猀猀Ⰰ 吀栀攀 攀渀琀爀礀 洀漀搀甀氀攀 漀昀 琀栀攀 猀氀椀搀攀 椀猀 搀椀昀昀攀爀攀渀琀 昀爀漀洀 琀栀攀 漀琀栀攀爀 愀猀 椀琀 氀漀漀欀猀 氀椀欀攀 愀猀 椀昀ഀ਀最漀椀渀最 琀栀爀漀甀最栀 愀 琀甀渀渀攀氀 愀渀搀 琀栀攀渀 猀氀椀搀椀渀最 琀栀爀漀甀最栀 琀栀攀 猀氀椀搀攀⸀䤀琀 椀猀 洀愀搀攀 昀爀漀洀 䰀䰀䐀倀䔀 ⠀䰀椀渀攀愀爀 䰀漀眀ഀ਀䐀攀渀猀椀琀礀 倀漀氀礀攀琀栀礀氀攀渀攀⤀ 戀礀 刀漀琀愀琀椀漀渀愀氀 洀漀氀搀椀渀最 瀀爀漀挀攀猀猀 愀渀搀 愀猀攀攀洀戀氀攀搀 眀椀琀栀 瀀椀瀀攀 愀渀搀 挀氀愀洀瀀 琀漀ഀ਀搀攀挀欀 瀀椀瀀攀⸀ 刀漀琀漀 猀瀀椀爀愀氀 猀氀椀搀攀 攀渀琀爀礀 猀甀瀀瀀漀爀琀 瀀愀爀琀 椀猀 挀漀洀戀椀渀愀琀椀漀渀 爀攀挀琀愀渀最甀氀愀爀 瀀椀瀀攀 愀渀搀 䜀䤀 瀀氀愀琀攀⸀ഀ਀䠀愀渀搀氀攀 最爀椀瀀 漀昀 ㈀ 一䈀 挀漀渀昀漀爀洀椀渀最 琀漀 䔀一 ㄀㄀㜀㘀ⴀ㄀㨀㄀㤀㤀㠀 愀琀琀愀挀栀攀搀 眀椀琀栀 一礀氀漀渀 挀氀愀洀瀀 漀昀 䜀爀愀搀攀ⴀ㘀ഀ਀挀氀愀洀瀀攀搀 琀漀 琀栀攀 䐀攀挀欀 瀀椀瀀攀 甀猀椀渀最 匀匀㌀ 㐀 最爀愀搀攀搀 渀漀渀 爀甀猀琀椀渀最 渀甀琀ⴀ戀漀氀琀猀 䌀愀琀 刀愀椀氀椀渀最㨀ⴀ 刀愀椀氀椀渀最猀 愀爀攀ഀ਀瀀爀漀瘀椀搀攀搀 漀渀 戀漀琀栀 猀椀搀攀猀 漀昀 戀爀椀搀最攀 愀猀 戀愀爀爀椀攀爀 昀漀爀 猀愀昀攀琀礀 瀀甀爀瀀漀猀攀⸀ 䤀琀 椀猀 洀愀搀攀 甀瀀 漀昀 䰀䰀䐀倀䔀 ⠀䰀漀眀䐀攀渀猀椀琀礀 倀漀氀礀攀琀栀礀氀攀渀攀 倀氀愀猀琀椀挀⤀ 椀渀 爀漀琀愀琀椀漀渀愀氀 洀漀氀搀椀渀最 瀀爀漀挀攀猀猀 愀渀搀 栀愀猀 愀 猀甀瀀瀀漀爀琀 漀昀 ㈀ 一䈀 瀀漀眀搀攀爀ഀ਀挀漀愀琀攀搀 䜀䤀 瀀椀瀀攀猀⸀ 吀栀攀 爀愀椀氀椀渀最 椀猀 愀琀琀愀挀栀攀搀 琀漀 琀栀攀 猀甀瀀瀀漀爀琀 瀀椀瀀攀 甀猀椀渀最 愀渀 䤀渀樀攀挀琀椀漀渀 䴀漀氀搀攀搀 一礀氀漀渀ഀ਀䌀氀愀洀瀀猀⸀ 䈀甀戀戀氀攀 倀愀渀攀氀 刀愀椀氀椀渀最㨀ⴀ 䤀渀 琀栀椀猀 琀礀瀀攀 漀昀 爀愀椀氀椀渀最 琀栀攀 戀甀戀戀氀攀 椀猀 洀愀搀攀 甀瀀 漀昀 愀挀爀礀氀椀挀 愀渀搀 琀栀攀ഀ਀昀爀愀洀攀 椀猀 洀愀搀攀 甀

tic (FRP).•Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 60micron.•For “FRP (FIBER REINFORCED PLASTIC):-All the Fibre Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. We use international quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required colour to the product. Thickness of the FRP material varies from 3 mm to 5 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test).•Powder coating: shall be done of pure polyester exteriors ultra- stabilized powder Paints. Thickness maintained is a minimum of 60-70microns.•Nut and Colour or similar specifications approved by departmental officers at site,-Bolts: Galvanized/S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety agains entrapment. Colour or similar specifications approved by departmental officers at site,-ࢱ企䐀㈀㠀 㘀㐀⼀㈀ ㈀㔀ⴀ㈀ ㈀㘀㨀匀甀瀀瀀氀礀 愀渀搀 䤀渀猀琀愀氀氀愀琀椀漀渀 漀昀 匀䤀䴀倀䰀夀 䜀伀 刀伀唀一䐀 䐀攀猀挀爀椀瀀琀椀漀渀猀 ∀†倀爀漀搀甀挀琀 䄀爀攀愀 㨀 ㄀⸀㈀洀 䐀椀愀 ⠀ 㐀 昀琀ഀ਀䐀椀愀⸀⤀ ∀†匀愀昀攀 倀氀愀礀 䄀爀攀愀 㨀 ㈀⸀㄀洀 䐀椀愀 ⠀ 㜀昀琀 䐀椀愀⸀⤀ ∀†䤀搀攀愀氀 䘀漀爀 㨀 ㈀ⴀ㔀夀攀愀爀猀 ∀†䘀爀椀攀渀搀猀 愀琀 愀 琀椀洀攀 㨀 㔀ⴀ㘀ഀ਀吀攀挀栀渀椀挀愀氀 匀瀀攀挀椀昀椀挀愀琀椀漀渀㨀 ∀删愀椀氀椀渀最猀 㨀刀愀椀氀椀渀最猀 眀栀椀挀栀 愀爀攀 搀攀猀椀最渀攀搀 挀漀渀昀漀爀洀椀渀最 琀漀 䔀一 ㄀㄀㜀㘀ⴀഀ਀㄀㨀㄀㤀㤀㠀 昀漀爀 猀琀愀渀搀愀爀搀 最爀椀瀀 爀攀焀甀椀爀攀洀攀渀琀Ⰰ 愀爀攀 洀愀搀攀 昀爀漀洀 ㈀㔀一䈀 䜀愀氀瘀愀渀椀稀攀搀 倀椀瀀攀 眀椀琀栀 䜀䤀 琀栀椀挀欀渀攀猀猀ഀ਀漀昀 㘀 ⸀ 刀愀椀氀椀渀最 昀爀愀洀攀 挀漀渀昀漀爀洀椀渀最 琀漀 䔀一 ㄀㄀㜀㘀ⴀ㄀㨀㄀㤀㤀㠀 昀漀爀 猀愀昀攀琀礀 愀最愀椀渀猀琀 攀渀琀爀愀瀀洀攀渀琀 漀昀 栀攀愀搀 ☀ഀ਀渀攀挀欀⸀ 吀栀攀 䘀爀愀洀攀 ⠀㈀ 一漀猀⸀⤀ 愀爀攀 昀椀砀攀搀 琀漀 琀栀攀 䠀䐀倀䔀 猀栀攀攀琀 瀀氀愀琀昀漀爀洀 爀攀椀渀昀漀爀挀攀搀 猀琀爀甀挀琀甀爀攀⸀ ∀倠氀愀琀昀漀爀洀ഀ਀㨀䠀椀最栀 䐀攀渀猀椀琀礀 倀漀氀礀攀琀栀礀氀攀渀攀 ⠀䠀䐀倀䔀⤀ 倀氀愀琀昀漀爀洀 䐀椀愀⸀㄀㈀ Ⰰ 琀栀椀挀欀渀攀猀猀 ㄀㔀 洀洀 栀愀瘀攀 栀椀最栀 猀瀀攀挀椀昀椀挀ഀ਀猀琀爀攀渀最琀栀⸀ ∀倠氀愀琀昀漀爀洀 猀甀瀀瀀漀爀琀 昀爀愀洀攀 㨀䘀爀愀洀攀 戀漀氀琀攀搀 眀椀琀栀 䠀䐀倀䔀 倀氀愀琀昀漀爀洀 昀漀爀 椀琀猀 爀椀最椀搀椀琀礀Ⰰ 洀愀搀攀 昀爀漀洀ഀ਀㈀㔀 一䈀 䌀爀漀猀猀 瀀椀瀀攀 眀攀氀搀攀搀 琀漀最攀琀栀攀爀 琀漀 愀 ㈀㔀一䈀 䈀攀渀搀 瀀椀瀀攀 琀漀 昀漀爀洀 愀 猀琀爀甀挀琀甀爀愀氀 昀爀愀洀攀⸀ ∀䈠攀愀爀椀渀最ഀ਀愀猀猀攀洀戀氀礀 㨀䈀攀愀爀椀渀最 愀猀猀攀洀戀氀礀 眀椀琀栀 琀眀漀 戀攀愀爀椀渀最猀 ㄀⸀ 䈀愀氀氀 䈀攀愀爀椀渀最 甀猀攀搀 昀漀爀 猀洀漀漀琀栀 爀漀氀氀椀渀最 愀挀琀椀漀渀⸀ഀ਀㈀⸀吀愀瀀攀爀 刀漀氀氀攀爀 䈀攀愀爀椀渀最 琀愀欀攀 瘀攀爀琀椀挀愀氀 琀栀爀甀猀琀 搀甀攀 琀漀 爀漀氀氀椀渀最 洀漀洀攀渀琀 ☀ 愀瀀瀀氀椀攀搀 眀攀椀最栀琀⸀ 吀栀攀ഀ਀戀攀愀爀椀渀最 愀猀猀攀洀戀氀礀 椀猀 昀椀砀攀搀 琀漀 琀栀攀 挀攀渀琀攀爀 猀甀瀀瀀漀爀琀 猀琀愀渀搀 愀渀搀 琀栀攀 瀀氀愀琀昀漀爀洀 猀甀瀀瀀漀爀琀 昀爀愀洀攀 愀猀猀攀洀戀氀礀 椀猀ഀ਀洀漀甀渀琀攀搀 漀瘀攀爀 椀琀⸀ ∀䌠攀渀琀攀爀 猀甀瀀瀀漀爀琀 㨀 㠀 一䈀 栀漀琀 搀椀瀀 最愀氀瘀愀渀椀稀攀搀 挀攀渀琀攀爀 猀甀瀀瀀漀爀琀 瀀椀瀀攀 漀昀 氀攀渀最琀栀ഀ਀㔀 洀洀 眀椀琀栀 䜀䤀 琀栀椀挀欀渀攀猀猀 漀昀 㘀 ⸀吀栀椀猀 瀀椀瀀攀 椀猀 眀攀氀搀攀搀 眀椀琀栀 愀 ㄀㔀 砀㄀㔀 洀洀 戀愀猀攀 瀀氀愀琀攀 愀琀 戀漀琀琀漀洀ഀ਀昀漀爀 昀椀砀椀渀最 琀栀攀 昀漀甀渀搀愀琀椀漀渀 愀渀最氀攀猀 䤀匀䄀 ☀ 䌀椀爀挀甀氀愀爀 瀀氀愀琀攀 漀渀 琀漀瀀 眀椀琀栀 伀䐀 ㈀ 洀洀 昀漀爀 愀猀猀攀洀戀氀椀渀最ഀ਀琀栀攀 戀攀愀爀椀渀最⸀ ∀倠椀瀀攀猀㨀 䄀氀氀 洀攀琀愀氀 瀀椀瀀攀猀 愀爀攀 䠀漀琀 䐀椀瀀瀀攀搀 䜀愀氀瘀愀渀椀稀攀搀 倀椀瀀攀猀 眀椀琀栀 䜀䤀 ㄀一伀 ㌀㜀Ⰰ㐀㤀㄀⸀ ഀ਀㌀㜀Ⰰ㐀㤀㄀⸀ 㠀 琀栀椀挀欀渀攀猀猀 漀昀 㘀 洀椀挀爀漀渀⸀ ∀倠椀瀀攀 䴀愀琀攀爀椀愀氀猀 漀爀 䌀氀愀猀猀㨀 䰀椀最栀琀 䐀甀琀礀 ⠀✀䄀✀ 䌀氀愀猀猀⤀ ☀ 䴀攀搀椀甀洀ഀ਀䐀甀琀礀 ⠀✀䈀✀ 䌀氀愀猀猀⤀ 匀攀爀椀攀猀 漀昀 瀀椀瀀攀猀 漀渀氀礀⸀ 圀愀氀氀 琀栀椀挀欀渀攀猀猀 漀昀 瀀椀瀀攀 瘀愀爀椀攀猀 愀挀挀漀爀搀椀渀最 琀漀 挀氀愀猀猀 ⼀猀攀爀椀攀猀 漀昀 瀀椀瀀攀 甀猀攀搀⸀ ∀倠漀眀搀攀爀 挀漀愀琀椀渀最㨀 䤀琀 猀栀愀氀氀 戀攀 搀漀渀攀 眀椀琀栀 瀀甀爀攀 瀀漀氀礀攀猀琀攀爀 爀愀眀 洀愀琀攀爀椀愀氀⸀䐀爀礀 昀椀氀洀ഀ਀吀栀椀挀欀渀攀猀猀 洀愀椀渀琀愀椀渀攀搀 眀椀琀栀椀渀 琀栀攀 爀愀渀最攀 漀昀 㔀 ⴀ㜀 洀椀挀爀漀渀猀⸀ 䤀琀 椀猀 琀攀猀琀攀搀 昀漀爀 愀搀栀攀猀椀漀渀 琀攀猀琀ഀ਀⠀䄀挀挀漀爀搀椀渀最 琀漀 䄀匀吀䴀ⴀ 䐀ⴀ㌀㌀㔀㤀⤀ 眀椀琀栀 琀栀攀 栀攀氀瀀 漀昀 挀爀漀猀猀 栀愀琀挀栀 挀甀琀琀攀爀 椀渀猀琀爀甀洀攀渀琀猀⸀ ∀丠甀琀 愀渀搀 䈀漀氀琀猀㨀ഀ਀䜀愀氀瘀愀渀椀稀攀搀⼀ 匀⸀匀⸀⼀䄀氀氀攀渀 䈀漀氀琀⼀䈀甀琀琀漀渀 䠀攀愀搀 䄀氀氀攀渀 䈀漀氀琀 ☀ 一甀琀猀 ⼀ 一礀氀漀渀 䰀漀挀欀 一甀琀猀 愀爀攀 甀猀攀搀 眀椀琀栀ഀ਀倀嘀䌀 䈀漀氀琀 䌀愀瀀猀⸀ 䄀氀氀 漀瀀攀渀 攀渀搀猀 漀昀 瀀椀瀀攀 戀攀攀渀 挀氀漀猀攀搀 戀礀 䜀䤀 ⼀ 倀嘀䌀 挀愀瀀猀 昀漀爀 甀猀攀爀 猀愀昀攀琀礀 愀最愀椀渀猀琀ഀ਀攀渀琀爀愀瀀洀攀渀琀⸀ 㨀 䌀漀氀漀甀爀 漀爀 猀椀洀椀氀愀爀 猀瀀攀挀椀昀椀挀愀琀椀漀渀猀 愀瀀瀀爀漀瘀攀搀 戀礀 搀攀瀀愀爀琀洀攀渀琀愀氀 漀昀昀椀挀攀爀猀 愀琀 猀椀琀攀Ⰰⴀ爀ćOD28065/2025-2026:Supply and Installation of DOUBLE ARC SWING with Product Area : 3.2m x 1.5m (10.5ft x 5ft), Safe Play Area : 4.2m X 3.9m (13.8ft X 13ft) Ideal For : 4-14 Years, Friends at a time : 2 withTechnical Specification: Arc swimg frame :6000mm long 80NB, Pipe bent in Single Piece & welded together with a flange 5mm thick & ISA of 20X20x3mm to form a strong frame, The 80NB pipe is hot dip galvanized pipe with GI thickness of 60. Height of the frame is 2700mm, Top pipe : 50NB Top Pipe with two Arc Swing Flanges welded at both its ends These 50NB top pipe is hot dip galvanized pipe of length 2950mm with GI thickness of 60. •Seat assembly : 1) Swing clamp assembly : Swing clamps made up of two parts are joined together with M6 Allen bolts along with S-Hook & a specially designed swing p

in.The S-Hook is specially designed to house a bearing for smooth & noiseless swinging. The clamps are made from injection molded Nylon-6 plastic. 2) Chain : Rubber dip molded swing1NO 56,521.00 56,521.00 5 chain of dia. 6mm & 1450mm Long. 3) Hook : S-Hook of dia 8mm & 145x130 Triangular hook. 4) Seat : Rubber Seat made by Natural Rubber with sufficient reinforcement. •Powder coating : It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instrument. •Bearing: Bearing is self-lubricated made of SKF/ NTN/ NACHI make shall be provided for smooth & trouble-free movement. •Pins and Circlips: 12mm diameter pins shall be made from EN8 material & Circlip A10. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Color: Multicolor or similar specifications approved by departmental officers at site٤伀㉄〸㘵㈯㈰ⴵ〲㘲区灵汰⁹湡⁤湩瑳污慬楴湯漠⁦䡃卅♔䡓問䑌剅䌠䵏䥂䅎䥔乏䐠獥牣灩楴湯⁳牐摯捵⁴牁慥਍›⸱洸砠ㄠ㘨瑦砠㌠㔮瑦 慓敦瀠慬⁹牁慥㨠㌠㠮⁸洲⠠〱瑦砠㜠瑦䘩湵瑣潩㩮匠牴湥瑧敨獮䌠敨瑳਍畭捳敬ⱳ䘠牯慥浲⁳…牔捩灥⹳吠捥湨捩污匠数楣楦慣楴湯›慍湩䘠慲敭›桔⁥慭湩映慲敭漠⁦桃獥൴倊敲獳搠畯汢⁥獩洠摡⁥牦浯ㄠ〰䉎䜠⁉楐数മ匊慥⁴牦浡㩥匠慥⁴牆浡⁥慭敤映潲㈳䉎䜠⁉楰数‮慍整楲污甠敳⁤潦⁲敳瑡愠敲䰠䑌䕐⠠楌敮牡਍潌⁷敄獮瑩⁹潐祬瑥票敬敮 楷桴唠⁖瑳扡汩穩瑡潩景䘠潯⁤片摡⁥潎慈慺摲畯⁳汐獡楴⹣਍桔捩湫獥⁳景琠敨删呏⁏牰摯捵獴瘠牡敩⁳牦浯㔠洠潴㠠洠獡瀠牥琠敨瀠潲畤瑣‮桔⁥癯牥污൬瀊潲畤瑣漠瑢楡獩愠猠慥汭獥⁳潴攠獮牵⁥数晲捥⁴敬摮漠⁦湵晩牯桴捩湫獥⁳…畤慲楢楬祴‮慈摮敬ഺ䠊湡汤⁥牦浡⁥獩洠摡⁥牦浯㌠串⁂湡⁤㔲䉎䜠⁉楐数‮慍整楲污甠敳⁤潦⁲慨摮牧灩椠⁳偅䵄਍攨桴汹湥⁥牰灯汹湥⁥楤湥⁥潭潮敭⥲删扵敢⹲潆瑯爠獥㩴㌠串⁂䥇洠瑡牥慩楰数椠⁳獵摥映牯਍潦瑯敲瑳‮敂牡湩㩧䈠慥楲杮⁳牡⁥楯敳污摥‬敳晬氭扵楲慣整⁤慭敤漠⁦䭓⽆丠乔 䅎䡃⁉慭敫਍桳污敢瀠潲楶敤⁤潦⁲浳潯桴☠琠潲扵敬昭敲⁥潭敶敭瑮‮瑏敨獲›湉整湲污氠捯潴氠浩瑩琠敨਍潭敶敭瑮倠灩獥›汁敭慴楰数⁳牡⁥潈⁴楄灰摥䜠污慶楮敺⁤楐数⁳楷桴䜠⁉桴捩湫獥⁳景㐠ⴰ਍〶業牣湯倮睯敤⁲潣瑡湩㩧䤠⁴桳污敢搠湯⁥楷桴瀠牵⁥潰祬獥整⁲慲⁷慭整楲污‮牄⁹楦浬਍桔捩湫獥⁳慭湩慴湩摥眠瑩楨桴⁥慲杮⁥景㔠ⴰ〷洠捩潲獮‮瑉椠⁳整瑳摥映牯愠桤獥潩整瑳眠瑩⁨桴൥栊汥⁰景挠潲獳栠瑡档挠瑵整⁲湩瑳畲敭瑮⹳畎⁴湡⁤潂瑬㩳䜠污慶楮敺⽤匠匮⼮汁敬潂瑬䈯瑵潴效摡਍汁敬潂瑬☠丠瑵⁳ 祎潬潌正丠瑵⁳牡⁥獵摥眠瑩⁨噐⁃潂瑬䌠灡⹳䄠汬漠数湥獤漠⁦楰数戠敥൮挊潬敳⁤祢䜠⁉ 噐⁃慣獰映牯甠敳⁲慳敦祴愠慧湩瑳攠瑮慲浰湥⹴䌠汯畯⁲牯猠浩汩牡猠数楣楦慣楴湯൳愊灰潲敶⁤祢搠灥牡浴湥慴景楦散獲愠⁴楳整䑏㠲㔰⼷〲㔲㈭㈰㨶畓灰祬愠摮椠獮慴汬瑡潩景䰠䝅倠䕒卓䐠問䱂⁅呓乁䅄䑒䐠獥牣灩楴湯⁳牐摯捵⁴牁慥㨠਍⸲㔰⁘⸰洵⠠⸶㌷瑆堠ㄠ㘮䘴⥴匠晡⁥汐祡䄠敲⁡›⸳㔰⁘⸱洵⠠〱瑆堠㔠瑆ഩ䘊湵瑣潩㩮圠牯潫瑵漠⁦桴杩⁨湡⁤慣晬⁳瑓敲杮桴湥湩⁧敌獧吠捥湨捩污匠数楣楦慣楴湯›潐瑳䐠慩›〸䉎䜠⁉慭湩瘠牥楴慣畳灰牯⁴楰数漠⁦敌⁧牐獥⁳潄扵敬椠⁳楦數⁤癯牥ㄠ洰桴捩慢敳瀠慬整മㄊ洰桴捩汣浡楰杮瀠慬整⁳牡⁥瑡慴档摥琠慭湩映慲敭琠潨摬琠敨爠獥⁴景愠獳浥汢敩⹳匠慥൴昊慲敭›敓瑡䘠慲敭洠摡⁥牦浯㐠丰⁂敢摮䜠⁉楰数⁳湡⁤慍整楲污甠敳⁤潦⁲敳瑡椠⁳䑈䕐⠠楈桧䐠湥楳祴倠汯敹桴汹湥⥥唠⁖瑳扡汩獩摥䰯䑌䕐‮桔獩猠慥⁴牦浡⁥獩洠畯瑮摥漠敶瑲捩污猠灵潰瑲਍楰数琠牨畯桧猠数楣污祬搠獥杩敮⁤敢牡湩⁧潨獵湩獧‮潆瑯爠獥㩴䘠潯牴獥⁴畳灰牯⁴潴戠⁥景㈠丵⁂⹇⁉楐数‮桔⁥慭整楲污⁳獵摥映牯映潯牴獥⁴獩䄠畬業畮൭挊獡楴杮䰯䑌䕐䠯偄⽅祎潬⹮䈠慥楲杮䠠畯楳杮猠慨汬戠⁥慭敤映潲卍洠瑡牥慩⹬䈠慥楲杮ഺ䈊慥楲杮⁳牡⁥楯敳污摥‬敳晬氭扵楲慣整⁤慭敤漠⁦䭓⽆丠乔 䅎䡃⁉ 䅆⁇慭敫猠慨汬戠൥瀊潲楶敤⁤潦⁲浳潯桴☠琠潲扵敬昭敲⁥潭敶敭瑮‮楐数㩳䄠汬洠瑥污瀠灩獥愠敲䠠瑯䐠灩数൤䜊污慶楮敺⁤楐数⁳楷桴䜠⁉桴捩湫獥⁳景㐠ⴰ〶業牣湯മ倊睯敤⁲潣瑡湩㩧䤠⁴桳污敢搠湯⁥楷桴瀠牵⁥潰祬獥整⁲慲⁷慭整楲污‮牄⁹楦浬吠楨正敮獳਍慭湩慴湩摥眠瑩楨桴⁥慲杮⁥景㔠ⴰ〷洠捩潲獮‮瑉椠⁳整瑳摥映牯愠桤獥潩整瑳眠瑩⁨桴⁥敨灬漠⁦牣獯൳栊瑡档挠瑵整⁲湩瑳畲敭瑮⹳丠瑵愠摮䈠汯獴›慇癬湡穩摥匯匮⼮汁敬潂瑬䈯瑵潴效摡䄠汬湥䈠汯⁴ദ上瑵⁳ 祎潬潌正丠瑵⁳牡⁥獵摥眠瑩⁨噐⁃潂瑬䌠灡⹳䄠汬漠数湥獤漠⁦楰数戠敥汣獯摥戠⁹䥇਍ 噐⁃慣獰映牯甠敳⁲慳敦祴愠慧湩瑳攠瑮慲浰湥⹴਍敃瑲晩捩瑡㩥䤠体〹㄰㈺㄰‵潃潬㩲䴠汵楴潣潬⁲潦⁲灯楴湯污漠⁲畣瑳浯穩摥愠摮愠⁳数⁲䅒⁌桓摡⹥਍慐正条湩㩧匠晡瑥⁹″慬敹⁲慰正条湩⁧楬敫ㄠ瑳䔠䕐䘠慯渲⁤䑈䕐䘠汩湡⁤爳⁤獩匠牴瑥档਍牷灡‮潎整›浉条獥愠敲漠汮⁹潦⁲敲敦敲据獥‮捁畴污倠潲畤瑣漠⁲潣潬牵漠⁦桴⁥牰摯捵⁴慭⁹慶祲漮䑏㠲㔰⼸〲㔲㈭㈰㨶畓灰祬愠摮椠獮慴汬瑡潩景䠠偉吠䥗呓剅䐠問䱂⁅敄捳楲瑰潩獮倠潲畤瑣䄠敲⁡›⸱洲砠〠㤮൭⠊⸳昹⁴⁸昳⥴匠晡⁥汐祡䄠敲⁡›⸲洲砠ㄠ㤮㤨㠮昵⁴⁸⸵昳⥴䤠敤污䘠牯㨠ㄠ″教牡⁳…扡癯൥䘊湵瑣潩㩮瑓敲捴敨⁳慷獩⁴…灕数⁲潂祤‮敔档楮慣灓捥晩捩瑡潩㩮䴠楡畓灰牯㩴吠敨洠楡൮猊灵潰瑲漠⁦楈⁰睴獩整⁲潣獮獩⁴景ㄠ〰䉎䜠䤮倠灩⹥਍慈摮敬›㔲䉎䜠污慶楮敺⁤楰数戠湥⁤潴映牯慨摮敬漠⁦楈⁰睔獩整⁲牰摯捵⹴਍潆瑯敲瑳䈠湥⁤楐数›〴䉎䜠⁉楰数椠⁳瑡慴档摥眠瑩⁨慭湩映慲敭琠潦浲愠映潯⁴敲瑳栠癡湩൧ㄊ〳㕸砰‵桴捩汰瑡⁥瑓湡楤杮漠⁲潒慴楴杮䐠獩⁣›瑓湡楤杮䐠獩⁣景㌠〰浭䐠慩爠畯摮猠穩⁥桳污൬戊⁥慭敤漠⁦䑈䕐䴯瑥污‮㔱浭琠楨正匠敨瑥愠摮倠慬整ㄠ洰桴捩潦⁲慢敳猠灵潰瑲‮敂牡湩㩧䈠慥楲杮⁳牡⁥楯敳污摥‬敳晬氭扵楲慣整⁤慭敤漠⁦䭓⽆丠乔 䅎䡃⁉慭敫猠慨汬戠⁥牰癯摩摥映牯਍浳潯桴☠琠潲扵敬昭敲⁥潭敶敭瑮‮楐数㩳䄠汬洠瑥污瀠灩獥愠敲䠠瑯䐠灩数⁤慇癬湡穩摥倠灩獥眠瑩൨䜊⁉桴捩湫獥⁳景㘠洰捩潲⹮潐摷牥挠慯楴杮›瑉猠慨汬戠⁥潤敮眠瑩⁨異敲瀠汯敹瑳牥爠睡洠瑡牥慩⹬਍牄⁹楦浬吠楨正敮獳洠楡瑮楡敮⁤楷桴湩琠敨爠湡敧漠⁦〵㜭‰業牣湯⹳䤠⁴獩琠獥整⁤潦⁲摡敨楳湯琠獥൴眊瑩⁨桴⁥敨灬漠⁦牣獯⁳慨捴⁨畣瑴牥椠獮牴浵湥獴‮畎⁴湡⁤潂瑬㩳䜠污慶楮敺⽤匠匮⼮汁敬൮䈊汯⽴畂瑴湯䠠慥⁤汁敬潂瑬☠丠瑵⁳ 祎潬潌正丠瑵⁳牡⁥獵摥眠瑩⁨噐⁃潂瑬䌠灡⹳䄠汬漠数൮攊摮⁳景瀠灩⁥敢湥挠潬敳⁤祢䜠⁉ 噐⁃慣獰映牯甠敳⁲慳敦祴愠慧湩瑳攠瑮慲浰湥⹴䌠汯牯漠⁲楳業慬൲猊数楣楦慣楴湯⁳灡牰癯摥戠⁹敤慰瑲敭瑮污漠晦捩牥⁳瑡猠瑩ⱥഭЊ䑏㠲㔰⼹〲㔲㈭㈰㨶畓灰祬愠摮椠獮慴汬瑡潩景䄠剅䅉⁌呓佒䱌剅䐠獥牣灩楴湯⁳牐摯捵⁴牁慥㨠ㄠ⁸⸰洵⠠昵⁴൸㈊㘮瑦 慓敦倠慬⁹牁慥㨠㈠⁸⸱洵⠠⸷昲⁴⁸⸴昹⥴䤠敤污䘠牯㨠ㄠ″教牡⁳…扡癯൥䘊湵瑣潩㩮匿牴湥瑧敨獮䰠来䴠獵汣獥‮潌敷⁲潢祤眠牯潫瑵吠捥湨捩污匠数楣楦慣楴湯›潐瑳䐠慩ഺ吊敨䄠牥慩瑓潲汬牥栠癡湩⁧牅潧潮業⁣敤楳湧眠瑩⁨〱丰⁂䥇洠楡敶瑲捩污猠灵潰瑲瀠灩⁥景਍敁楲污匠牴汯敬⁲獩映硩摥漠敶⁲〱浭琠楨正戠獡⁥汰瑡⹥䌠慬灭湩⁧汰瑡獥愠敲愠瑴捡敨⁤潴洠楡牦浡൥琊潨摬琠敨爠獥⁴景愠獳浥汢敩⹳਍潆瑯敲瑳愠摮䠠湡汤獥›潆瑯敲瑳戠湥⁤湡⁤慈摮敬栠癡湩⁧〴䉎愠摮㈠丵⁂楄⁡慧癬湡穩摥瀠灩൥爊獥数瑣癩汥⁹桔⁥慭整楲污⁳獵摥映牯映潯牴獥⁴獩愠畬業畮⽭䱌偄⽅䑈䕐丯汹湯മ倊灩獥›汁敭慴楰数⁳牡⁥潈⁴楄灰摥䜠污慶楮敺⁤楐数⁳楷桴䜠⁉桴捩湫獥⁳景㘠洰捩潲⹮਍潐摷牥挠慯楴杮›瑉猠慨汬戠⁥潤敮眠瑩⁨異敲瀠汯敹瑳牥爠睡洠瑡牥慩⹬䐠祲映汩桔捩湫獥൳洊楡瑮楡敮⁤楷桴湩琠敨爠湡敧漠⁦〵㜭‰業牣湯⹳䤠⁴獩琠獥整⁤潦⁲摡敨楳湯琠獥⁴楷桴琠敨栠汥⁰景挠潲獳਍慨捴⁨畣瑴牥椠獮牴浵湥獴‮敂牡湩⁧潈獵湩⁧桳污敢洠摡⁥牦浯䴠⁓慭整楲

…楃捲楬獰洠摡⁥牦浯猠慴摮牡⁤慭整楲污丮瑵愠摮䈠汯獴›慇癬湡穩摥 ⹓⹓䄯汬湥਍潂瑬䈯瑵潴效摡䄠汬湥䈠汯⁴…畎獴⼠丠汹湯䰠捯畎獴愠敲甠敳⁤楷桴倠䍖䈠汯⁴慃獰‮汁灯湥਍湥獤漠⁦楰数戠敥汣獯摥戠⁹䥇⼠倠䍖挠灡⁳潦⁲獵牥猠晡瑥⁹条楡獮攠瑮慲浰湥⹴਍潃潬牵漠⁲楳業慬⁲灳捥晩捩瑡潩獮愠灰潲敶⁤祢搠灥牡浴湥慴景楦散獲愠⁴楳整儬
〵ㄮ⸸⸸⸷㨲牐癯摩湩⁧湡⁤楦楸杮倠䍖瀠灩獥‬楦瑴湩獧椠据畬楤杮映硩湩⁧桴⁥楰数眠瑩⁨汣浡獰愠⁴⸱〰洠猠慰楣杮‮桔獩椠据畬敤⁳潪湩楴杮漠⁦楰数⁳楷桴漠敮猠整⁰噐⁃潳癬湥⁴散敭瑮愠摮琠獥楴杮漠⁦潪湩獴挠浯汰瑥⁥獡瀠牥搠物捥楴湯漠⁦湅楧敮牥椭⵮桃牡敧‮潃据慥敬⁤潷歲‬湩汣摵湩⁧畣瑴湩⁧档獡獥愠摮洠歡湩⁧潧摯琠敨眠污瑥⁣㌶洠楰数㐠欠晧 浣㘲
〵ㄮ⸸⸹㌱㈮债潲楶楤杮愠摮映硩湩⁧噐⁃楰数ⱳ映瑩楴杮⁳湩汣摵湩⁧楦楸杮琠敨瀠灩⁥楷桴挠慬灭⁳瑡ㄠ〮‰灳捡湩⹧吠楨⁳湩汣摵獥樠楯瑮湩⁧景瀠灩獥☠映瑩楴杮⁳楷桴漠敮猠整⁰噐⁃潳癬湥⁴散敭瑮愠摮琠獥楴杮漠⁦潪湩獴挠浯汰瑥⁥獡瀠牥搠物捥楴湯漠⁦湅楧敮牥椭⵮桃牡敧㈠‵浭搠慩ㄠ‰杋⽦浣ⴲ䔠瑸牥慮潷歲ⴠ䔠灸獯摥漠慷汬Ĵ㔀⸰㠱㤮ㄮ⸵㨱牐癯摩湩⁧湡⁤楦楸杮倠䍖瀠灩獥‬楦瑴湩獧椠据畬楤杮映硩湩⁧桴⁥楰数眠瑩⁨汣浡獰愠⁴⸱〰洠猠慰楣杮‮桔獩椠据畬敤⁳潪湩楴杮漠⁦楰数⁳…楦瑴湩獧眠瑩⁨湯⁥瑳灥倠䍖猠汯敶瑮挠浥湥⁴湡⁤整瑳湩⁧景樠楯瑮⁳潣灭敬整愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湩䌭慨杲⁥〴洠楤⁡〱杋⽦浣ⴲ䔠瑸牥慮潷歲‭硅潰敳⁤湯眠污镬〵ㄮ⸸⸹〲ㄮ债潲楶楤杮愠摮映硩湩⁧噐⁃潭汵敤⁤楦瑴湩獧 捡散獳牯敩⁳潦⁲楒楧⁤噐⁃楰数ⱳ椠据畬楤杮樠楯瑮湩⁧楷桴倠䍖猠汯敶瑮挠浥湥⁴‭㌶洠楤⁡汅潢魷〵ㄮ⸸⸹〲㈮债潲楶楤杮愠摮映硩湩⁧噐⁃潭汵敤⁤楦瑴湩獧 捡散獳牯敩⁳潦⁲楒楧⁤噐⁃楰数ⱳ椠据畬楤杮樠楯瑮湩⁧楷桴倠䍖猠汯敶瑮挠浥湥⁴㘭″楤⁡㔴搠来敲⁥汅潢靷〵ㄮ⸸⸹〲㔮债潲楶楤杮愠摮映硩湩⁧噐⁃潭汵敤⁤楦瑴湩獧愯捣獥潳楲獥映牯删杩摩倠䍖瀠灩獥椠据畬楤杮樠楯瑮湩⁧楷桴倠䍖猠汯敶瑮挠浥湥⁴‭㌶㙸砳㌶洠楤⁡敔鵥〵ㄮ⸸⸹ㄲ㈮债潲楶楤杮愠摮映硩湩⁧噐⁃潭汵敤⁤楦瑴湩獧愯捣獥潳楲獥映牯删杩摩倠䍖瀠灩獥‬湩汣摵湩⁧潪湩楴杮眠瑩⁨噐⁃潳癬湥⁴散敭瑮ⴠ㔷洠楤⁡㔴搠来敲⁥汅潢驷〵ㄮ⸸⸹ㄲ㌮债潲楶楤杮愠摮映硩湩⁧噐⁃潭汵敤⁤楦瑴湩獧⼠愠捣獥潳楲獥映牯删杩摩倠䍖瀠灩獥‬湩汣摵湩⁧潪湩楴杮眠瑩⁨噐⁃潳癬湥⁴散敭瑮ⴠ㔷洠楤⁡潄牯䔠扬睯 㔀⸰㠱㤮㈮⸱㨹牐癯摩湩⁧湡⁤楦楸杮倠䍖洠畯摬摥映瑩楴杮⽳愠捣獥潳楲獥映牯删杩摩倠䍖瀠灩獥‬湩汣摵湩⁧潪湩楴杮眠瑩⁨噐⁃潳癬湥⁴散敭瑮ⴠ㜠‵浭搠慩匠捯敫⁴振畯汰湩ꁧ〵ㄮ⸸⸹㈲ㄮ㨱牐癯摩湩⁧湡⁤楦楸杮倠䍖洠畯摬摥映瑩楴杮⽳捡散獳牯敩⁳潦⁲楒楧⁤噐⁃楰数ⱳ湩汣摵湩⁧潪湩楴杮眠瑩⁨噐⁃潳癬湥⁴散敭瑮ⴠㄠ〱洠楤⁡潓正瑥 潣灵楬杮¡㔀⸰㠱㤮㈮⸲㨲牐癯摩湩⁧湡⁤楦楸杮倠䍖洠畯摬摥映瑩楴杮⁳ 捡散獳牯敩⁳潦⁲楒楧⁤噐⁃楰数ⱳ椠据畬楤杮樠楯瑮湩⁧楷桴倠䍖猠汯敶瑮挠浥湥⁴‭ㄱ‰浭搠慩㐠‵敤牧敥䔠扬睯”㔀⸰㠱㤮㈮⸲㨴牐癯摩湩⁧湡⁤楦楸杮倠䍖洠畯摬摥映瑩楴杮⽳愠捣獥潳楲獥映牯删杩摩倠䍖瀠灩獥‬湩汣摵湩⁧潪湩楴杮眠瑩⁨噐⁃潳癬湥⁴散敭瑮‭ㄱ‰浭搠慩䈠湥핤〵ㄮ⸸⸹⸳㨲牐癯摩湩⁧湡⁤楦楸杮倠䍖瀠灩獥椠据畬敤⁳潪湩楴杮漠⁦楰数⁳楷桴漠敮猠整⁰噐⁃潳癬湥⁴散敭瑮‬牴湥档湩Ⱨ爠晥汩楬杮☠琠獥楴杮漠⁦潪湩獴挠浯汰瑥⁥獡瀠牥搠物捥楴湯漠⁦湅楧敮牥椠桃牡敧‮㔲洠楤⁡〱䝋⽆浣픲〵ㄮ⸸⸹⸵㨱牐癯摩湩⁧湡⁤楦楸杮倠䍖瀠灩獥椠据畬楤杮⁳潪湩楴杮漠⁦楰数⁳楷桴漠敮猠整⁰噐⁃潳癬湥⁴散敭瑮‬牴湥档湩⁧敲楦汬湩⁧…整瑳湩⁧景樠楯瑮⁳潣灭敬整愠⁳数⁲楤敲瑣潩景䔠杮湩敥⁲湩䌠慨杲⁥〴洠楤⁡〱杋⽦浣턲〵ㄮ⸸⸹⸸㨲牐癯摩湩⁧湡⁤楦楸杮倠䍖瀠灩獥椠据畬楤杮⁳景瀠灩獥眠瑩⁨湯⁥瑳灥倠䍖猠汯敶瑮挠浥湥ⱴ琠敲据楨杮愠摮爠晥汩楬杮☠琠獥楴杮漠⁦潪湩獴挠浯汰瑥⁥獡瀠牥搠物捥楴湯漠⁦湅楧敮牥椠桃牡敧‮㔷洠楤⁡‴杋⽦浣弲
䑏㠲㠱⼷〲㔲㈭㈰㨶ㄵㄮ⸹呓⸳匠灵汰楹杮愠摮椠獮慴汬湩⁧敲摡⁹慭敤倠䍖匠灥楴⁣慴歮椠据畬楤杮琠敨挠獯⁴景挠牡楲条ⱥ਍牴湥档湩Ⱨ瀠慬楣杮愠⁴桴⁥敬敶敢潬⁷牧畯摮氠癥汥愠⁳灳捥晩敩⁤獡瀠牥琠敨搠物捥楴湯漠⁦湥楧敮牥椠据慨杲⁥倨潲楶楳湯映牯䌠⽃䍒⽃慓摮〯洶条牧来瑡⁥潦⁲桴⁥牰灥牡瑡潩景戠摥猠慨汬戠⁥慰摩਍敳慰慲整祬ഩ㌊‮㔲琠敢潬⁷㔳映畬桳挠灡捡瑩൹Ԋ㜱㔮ㄮ债潲楶楤杮愠摮映硩湩⁧桷瑩⁥楶牴潥獵挠楨慮映慬⁴慢正栠污⁦瑳污牵湩污漠⁦楳敺㔠〸㍸〸㍸〵洠楷桴眠楨整倠䍖愠瑵浯瑡捩映畬桳湩⁧楣瑳牥Ɱ眠瑩⁨楦瑴湩獧‬瑳湡慤摲猠穩⁥⹃⹐戠慲獳映畬桳瀠灩ⱥ猠牰慥敤獲眠瑩⁨湵潩獮愠摮挠慬灭⁳愨汬椠⹃⹐戠慲獳 楷桴眠獡整映瑩楴杮愠⁳数⁲卉㨠㈠㔵ⰶ䌠䤮‮牴灡眠瑩⁨畯汴瑥朠慲楴杮愠摮漠桴牥挠畯汰湩獧椠⹃⹐戠慲獳‬湩汣摵湩⁧慰湩楴杮漠⁦楦瑴湩獧愠摮挠瑵楴杮愠摮洠歡湩⁧潧摯琠敨眠污獬愠摮映潬牯⁳桷牥癥牥爠煥極敲㩤楓杮敬栠污⁦瑳污牵湩污眠瑩⁨‵楬牴⁥噐⹃愠瑵浯瑡捩映畬桳湩⁧楣瑳牥䙮
㜱㜮㜮债潲楶楤杮愠摮映硩湩⁧慷桳戠獡湩眠瑩⁨⹃⹉戠慲正瑥ⱳㄠ‵浭䌠倮‮牢獡⁳楰汬牡琠灡ⱳ㌠′浭䌠倮‮牢獡⁳慷瑳⁥景猠慴摮牡⁤慰瑴牥Ɱ椠据畬楤杮瀠楡瑮湩⁧景映瑩楴杮⁳湡⁤牢捡敫獴‬畣瑴湩⁧湡⁤慭楫杮朠潯⁤桴⁥慷汬⁳桷牥癥牥爠煥極敲场楨整嘠瑩敲畯⁳桃湩⁡汆瑡戠捡慷桳戠獡湩猠穩⁥㔴砰〳‰浭眠瑩⁨楳杮敬ㄠ‵浭䌠倮‮牢獡⁳楰汬牡琠灡㄀⸷㨸牐癯摩湩⁧湡⁤楦楸杮眠楨整瘠瑩敲畯⁳档湩⁡数敤瑳污映牯眠獡⁨慢楳潣灭敬整祬爠捥獥敳⁤瑡琠敨戠捡潦⁲桴⁥敲散瑰潩景瀠灩獥愠摮映瑩楴杮⹳‰㄀⸷㠲ㄮㄮ债潲楶楤杮愠摮映硩湩⁧⹐⹖⹃眠獡整瀠灩⁥潦⁲楳歮漠⁲慷桳戠獡湩椠据畬楤杮倠䍖മ眊獡整映瑩楴杮⁳潣灭敬整ਮ敓業爠杩摩瀠灩㍥′浭搠慩Θ㄀⸹⸷⸱㨱潃獮牴捵楴杮戠楲正洠獡湯祲洠湡潨敬椠散敭瑮洠牯慴⁲㨱‴ ‱散敭瑮㨠㐠挠慯獲⁥慳摮 楷桴删䌮䌮‮潴⁰楷桴ㄠ㈺㐺洠硩⠠‱散敭瑮㨠㈠挠慯獲⁥慳摮㨠㐠朠慲敤⁤瑳湯⁥条牧来瑡⁥〲洠潮業慮楳敺Ⱙ映畯摮瑡潩潣据敲整ㄠ㐺㠺洠硩⠠ㄠ挠浥湥⁴›‴潣牡敳猠湡⁤›‸牧摡摥猠潴敮愠杧敲慧整㐠‰浭渠浯湩污猠穩ⱥ 湩楳敤瀠慬瑳牥湩⁧㈱洠桴捩楷桴挠浥湥⁴潭瑲牡ㄠ㌺⠠ㄠ挠浥湥⁴›″潣牡敳猠湡⥤映湩獩敨⁤楷桴映潬瑡湩⁧潣瑡漠⁦敮瑡挠浥湥⁴湡⁤慭楫杮挠慨湮汥⁳湩挠浥湥⁴潣据敲整ㄠ㈺㐺⠠ㄠ挠浥湥⁴›′潣牡敳猠湡⁤›‴牧摡摥猠潴敮愠杧敲慧整㈠‰浭渠浯湩污猠穩⁥ 楦楮桳摥眠瑩⁨⁡汦慯楴杮挠慯⁴景渠慥⁴散敭瑮挠浯汰瑥⁥獡瀠牥猠慴摮牡⁤敤楳湧਺湉楳敤猠穩⁥〹㡸‰浣愠摮㐠‵浣搠敥⁰湩汣摵湩⁧⹃⹉挠癯牥眠瑩⁨牦浡⁥氨杩瑨搠瑵⥹㐠㔵㙸〱洠湩整湲污搠浩湥楳湯ⱳ琠瑯污眠楥桧⁴景挠癯牥愠摮映慲敭琠敢渠瑯氠獥⁳桴湡㌠‸杫⠠敷杩⁨景挠癯牥㈠″杫愠摮眠楥桧⁴景映慲敭ㄠ‵杫㨩楗桴挠浯潭畢湲⁴汣祡䘠倮匮‮渨湯洠摯汵牡 牢捩獫漠⁦汣獡⁳敤楳湧瑡潩⸷䨵䑏㠲㜲⼲〲㔲㈭㈰㨶牄癩湩⁧潤湷删䍃瀠汩獥漠⁦〳洰煳慵敲椠楳敺琠桴⁥敲畱物摥搠灥桴椠楬敮愠摮氠癥汥⁳潴猠晡൥眊牯楫杮氠慯獤‬湩汣摵湩⁧桳晩楴杮琠敨挠獡整⁤楰敬⁳潴琠敨搠楲楶杮猠潰⁴楷桴畯⁴慤慭楧杮琠敨瀠汩൥眊瑩⁨敮散獳牡⁹楬瑦湩⁧煥極浰湥獴‬汰捡湩⁧湩挠牯敲瑣瀠獯瑩潩潴氠湩⁥湡⁤牤癩湩⁧潤湷琠൯爊煥極敲⁤敤瑰⁨楷桴琠敨栠汥⁰景搠楲楶杮攠畱灩敭瑮椠据畬楤杮栠物⁥档牡敧⁳潦⁲牤癩湩⁧煥極浰湥ⱴ਍慭档湩牥ⱹ汰湡獫‬畦汥ⱳ氠扡畯⁲档牡敧⁳瑥⁣潣灭敬整愠⁳数⁲桴⁥楤敲瑣潩景琠敨搠灥牡浴湥慴൬漊晦捩牥⁳瑡猠瑩⁥牦浯愠灰潲敶⁤獥楴慭整䔠呓丠⹯㨠剉⽒䅉䔯呓ㄯ㔴⼹〲㈲㕟㙟㙟⠠摅瑩䤠⁤›⤵Ʈ伀㉄㈸㌷㈯㈰ⴵ〲㘲䌺楨灰湩⁧桴⁥潴⁰景删䍃瀠汩獥琠敲畱物摥氠湩⁥湡⁤敬敶祢洠捥慨楮慣⽬慭畮污洠慥獮眠瑩潨瑵਍慤慭楧杮琠敨爠浥楡楮杮瀠牡⁴景琠敨瀠汩⁥湡⁤瑳捯火汩湩⁧瑡搠獥杩慮整⁤潬慣楴湯⁳湡⁤楤灳獯污漠൦搊獩慭瑮敬⁤慭整楲污⁳灵琠⁡敬摡漠⁦‱楫潬敭牴ⱥ猠慴正湩⁧敳癲捩慥汢⁥湡⁤湵敳癲捩慥汢൥洊瑡牥慩敳慰慲整祬椠据畬楤杮挠瑵楴杮爠楥普牯散敭瑮戠牡⹳映潲灡牰癯摥攠瑳浩瑡⁥卅⁔潎‮䤺剒䤯⽁卅⽔㐱㤵㈯㈰弲張弶‶䔨楤⁴摉㨠㔠ഩ⌊䑏㠲㜲⼰〲㔲㈭㈰㨶潃潣畮⁴楐敬ⴠ䐠楲楶杮搠睯桴⁥敷汬洠瑡牵摥挠捯湯瑵瀠汩⁥潴爠煥極敲⁤楬敮⁳湡⁤敬敶獬琠牨畯桧਍慶楲畯⁳瑳慲慴漠⁦潳瑦琠敭楤浵挠慬⁹湩汣摵湩⁧污楨敲挠慨杲獥愠摮氠扡畯⁲潦⁲潣癮祥湩Ⱨ氠晩楴杮ബ猊慴楧杮愠摮愠汬漠桴牥愠灰楬湡散⁳敮散獳牡⁹潦⁲楰敬搠楲楶杮搠睯晡整⁲潰湩楴杮琠敨戠瑯潴湥൤䄊⁳数⁲敬瑴牥丠⹯䤠獮⹰敔档㈭ㄯ㠱㈯㈰ⴰ䥆⁎慤整⁤㤲〭ⴴ〲ㄲ漠⁦桴⁥楆慮据⁥䤨獮数瑣潩൮圊湩ⵧ吠捥湨捩污 敄慰瑲敭瑮‮敄慴汩⁳潦⁲牤癩湩⁧洶‬㔱渠景瀠獯獴瀠牥搠祡映潲灡牰癯摥攠瑳浩瑡⁥卅⁔潎‮䤺剒䤯⽁卅⽔㐱㤵㈯㈰弲張弶‶䔨楤⁴摉㨠㔠Щ
䑏㠲㜲⼱〲㔲㈭㈰㨶牐癯摩湩⁧慃瑳䤠潲潂汬牡獤眠瑩⁨灡牰癯摥搠慲楷杮⁳湡⁤敤楳湧椠据畬楤杮挠獯⁴景愠汬਍慭整楲污ⱳ洠畯摬湩⁧档牡敧⁳‬潣瑳漠⁦楦瑸牵獥愠摮愠汬氠扡畯⁲档牡敧⁳瑥⹣挠浯汰瑥⁥牦浯愠灰潲敶⁤獥楴慭整䔠呓丠⹯㨠剉⽒䅉䔯呓ㄯ㔴⼹〲㈲㕟㙟㙟⠠摅瑩䤠⁤›⤵’㄀⸳㔶ㄮ债楡瑮湩⁧楷桴戠慬正愠瑮⵩挠牯潲楳敶戠瑩浵獡楴⁣慰湩⁴景愠灰潲敶⁤牢湡⁤湡⁤慭畮慦瑣牵⁥潴朠癩⁥湡攠敶桳摡㩥睔牯洠牯⁥潣瑡⁳湯渠睥眠牯牫⸵㌲区潭瑯⁨楦楮桳湩⁧景琠敨攠灸獯摥猠牵慦散漠⁦䍒⁃潷歲眠瑩⁨洶桴捩散敭瑮洠牯慴⁲㨱″ 散敭瑮㨠㌠映湩⁥慳摮⸩ú伀㉄㌸ㄴ㈯㈰ⴵ〲㘲为浡⁥潢牡⁤景猠穩⁥㔷㙸‰浣椠獮慴汬摥椠桴⁥灡潲牰慩整瀠慬散瘠獩扩敬琠桴⁥異汢捩洠摡⁥景਍牢捩慷汬眠瑩⁨牧湡瑩⁥汰煡敵猠潨汵⁤敢椠獮牥整⁤湡⁤湥牧癡湩⁧敬瑴牥⁳瑥⁣潣灭敬整愠⁳数⁲桴൥搊物捥楴湯漠⁦敤慰瑲敭瑮污漠晦捩牥⁳瑡猠瑩ꡥ䑏㠲㐳⼲〲㔲㈭㈰㨶牐癯摩湩⁧湡⁤瑳捡楫杮漠⁦牔瑯楨⁣硉牯⽡桃瑥楨倠慬瑮漠⁦敨杩瑨㈠‰浣琠〳挠

t site including conveyance as per direction of the officer-in-charge.¿OD28343/2025-2026:Providing and Stacking of GOLDEN BAMBOO -Phyllostachys Aurea, having ht. 90 cm to 1.20 m , well developed, fresh, and healthy as per the direction of the officer in-charge.ÓOD28344/2025-2026:Supplying and Providing Victoria bench (150cm x 60 cm), with FRP streap 3 seater heavy duty garden bench for outdoor powder coated for a smooth finish washable and waterproof ,wooden finish ‘OD28347/2025-2026:Lum sum provision for Enhancing the surface with artistic paintings, such as Artera -style art, to improve its aesthetic appeal¤OD28348/2025-2026:Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work§
OD28349/2025-2026:Finishing the front side of existing compound wall with art design paint as per drawing using Acrylic Smooth exterior paint of required shade, Two or more coat including applying additional coats wherever required applied over and including priming coat of exterior primer , to achieve even shade and colour, cost for scaffolding, charges for artist ,etc complete EST No. :OEO/TRIDA/EST/430/2025_5_1_1 ÇOD28350/2025-2026:Supply, conveyance, installation, testing and commissioning of 30W Integrated Solar LED light fitting with all accessories. Each unit should include 18V,75W panel with Grade A solar cells, 24Ah, 12.8V LiFePO4 type battery, Luminaire housing component to be Aluminium alloy with powder paint, IP65, LED chip shall be Philips/Osram, THD <10%, efficiency greater than 85%,3800-4500 lumens,etc. as required with 5years warranty . Luminaire shall be suitable for mounting at a height of 5-6m, should have 24hrs autonomy, PIR sensor for better efficient lighting. Certifications:MNRE/IEC/BIS/LM80/ROHS/IP65) from approved estimate EST No. :IRR/IA/EST/1459/2022_5_6_6 (Edit Id : 5)6
OD28351/2025-2026:Supply and erection of Decorative tubular stainless steel pole having 5 mtr height, 2.5-2inch outer dia made from min. 2mm thick plate for fixing of solar light, all other incidental and miscellaneous charges complete from approved estimate EST No. :IRR/IA/EST/1459/2022_5_6_6 (Edit Id : 5)

considered excluding fixing accessories such as nuts, bolts, fasteners etc.)6
OD25345/2025-2026:Supply and erection of Decorative tubular stainless steel pole having 5 mtr height, 2.5-2inch outer dia made from min. 2mm thick plate for fixing of solar light, all other incidental and miscellaneous charges complete from approved estimate EST No. :IRR/IA/EST/1459/2022_5_6_6 (Edit Id : 5)setÇOD25319/2025-2026:Supply, conveyance, installation, testing and commissioning of 30W Integrated Solar LED light fitting with all accessories. Each unit should include 18V,75W panel with Grade A solar cells, 24Ah, 12.8V LiFePO4 type battery, Luminaire housing component to be Aluminium alloy with powder paint, IP65, LED chip shall be Philips/Osram, THD <10%, efficiency greater than 85%,3800-4500 lumens,etc. as required with 5years warranty . Luminaire shall be suitable for mounting at a height of 5-6m, should have 24hrs autonomy, PIR sensor for better efficient lighting. Certifications:MNRE/IEC/BIS/LM80/ROHS/IP65) from approved estimate EST No. :IRR/IA/EST/1459/2022_5_6_6 (Edit Id : 5)•
5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size derived from natural sources)Ê
5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).
50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc [email protected]:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
60.7.8:DR with Departmental. Stone - DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course using departmental rubble including packing to compactness to lines and levels, labour charges etc. complete as per direction of Departmental officers at site
60.7.1:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at siteô30.2.57.1:Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieable material?s as per direction of officer in charge (excluding cast of plant & water )Cost of plantation per trees plants (for 100 nos.=427.45/100)¨OD25339/2025-2026:Providing and stacking of Trothic Ixora/Chethi Plant of height 20 cm to 30 cm at site including conveyance as per direction of the officer-in-charge.«30.2.2:Supplying and stacking of good earth at site including royalty and carriage upto 5 k.m. lead complete (earth measured in stacks will be reduced by 20% for payment)..
OD25346/2025-2026:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench 40/32 mm or nearest size,OD25331/2025-2026:Supply and Installation of UME SEE -SAW with Product Area : 1.85m X 0.45m (6ft X 1.4ft), Safe Play Area : 2.85m X1.45m (9.3ft X 4.8ft) Ideal For : 3-10 Years, Friends at a time : 2 with technical Specification: Handle grip: Hand Grip conforming to EN 1176-1:2015 for requirement of hand grip made from 20NB Galvanized pipe with end caps, See-saw lever: See Saw Lever made from 80NB Galvanized Pipe with strong load carrying capacity, Seat made from LLDPE by rotational moulding- 295x190x70mm Rotational molded seat with grip, See Saw stand with special Nylon-6 bush enclosed in a seamless pipe hinged to 50NB Support pipe, the stand is fixed with ISA for strong foundation grip, See Saw impact attenuator: is 1NO 31,125.00 31,125.00 6 made from 20NB Galvanized pipe, Bearing: heavy duty nylon bush, ROTO products manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic with thickness varies from 5 mm to 8 mm as per the product, pipes: Hot Dipped Galvanized Pipes with GI thickness of 60micron, powder coating: with pure polyester raw material, dry film Thickness maintained within the range of 50-70 microns tested for adhesion test with the help of cross hatch cutter instrument, Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps, all open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Color: Multicolor or similar specifications approved by departmental officers at site,Ë OD25325/2025-2026:Supply and Installation of FRP ROLLER SLIDE 5FTDescriptions Product Area : 5.6m x 1.0m (18.4ft x 3.3ft) Safe Play Area : 6.6m x 2.0m (18.7ft x 6.6ft) Age Group : 4-10 yrs. Friends at a time : 4 to 5 Technical Specification: Small H-Support: It is made from 25NB GI Pipe length 600mm with 10mm tor rod of length 300 mm for support & strong foundation Center Support pipe: 80NB hot dip galvanized Deck pipe of length 1980mm with GI thickness of 60 microns Ladder Frame: The slide ladder is made up of 25 NB GI pipe & the ladder hand-railing is made up of 15 NB and 20 NB pipes respectively. Ladder Step: Cold formed 16 Gauge GI Plated Sheet Length 500mm & width 90mm EN1176- 1:1998 conforming to EN1176- 1:1998. The trade and riser of the ladder are designed in such a way it wont entrap childs foot while playing. All the sharp edges and corners are properly grinded to give smooth finish so that children are not hurt while playing on it. Platform: It is 16 SWG GI Plated Platform of size - 500x450x60mm Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 60micron.FRP Roller Slide landing: It is FRP Roller Slide landing with support flanges of ISA conforming to standards IS-808-1964 & it is made up of Fiber Reinforced Plastic (FRP)FRP Roller Slide side arm: It Is made up of Fiber Reinforced Plastic (FRP) with reinforced pins for assembling the rollers FRP Roller Slide top: It Is made up of Fiber Reinforced Plastic (FRP)Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 60micron.Roller: It is made from LLDPE (Linear Low Density Polyethylene) Material. The most attractive and enjoyable of its kind, the slide chute consists of molded plastic rollers spread over the length. It is made in rotational molding.For Roto product: The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect lend of uniform thickness & durability. For FRP product: All the Fiber Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. We use international quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required colour to the product. Thickness of the FRP material varies from 3 mm to 5 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test).Powder coating: It shall be done of pure polyester exteriors ultra- stabilized powder Paints. Thickness maintained is a minimum of 60-70 microns.Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC

Color:Colour or similar specifications approved by departmental officers at site,- Multicolor for optional orcustomized Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate: Colour or similar specifications approved by departmental officers at site,-çOD25320/2025-2026:Supply and Installation of ANIMAL GO ROUND Descriptions Product Area : 2.1m Dia (7 ft Dia.) Safe Play Area : 3.1m Dia (10.2 ft Dia.) ? Ideal For : 3-12 Years Friends at a time : 4 Technical Specification: MGR frame : MGR Frame made from 40NB pipes welded together with bottom end over a circular plate meant for assembling bearing assembly. The top end of the pipe is welded with a ISF & a plate for mounting the animal (duck) over it. The four 40NB pipe are hold together with four 25NB pipe to form a strong structure. Bearing assembly :Bearing assembly with two bearings Center support : 80NB hot dip galvanized center support pipe of length 500mm with GI thickness of 60 .This pipe is welded with a 150x150mm base plate at bottom for fixing the foundation angles ISA & Circular plate on top with OD 200mm for assembling 1NO 34,875.00 34,875.00 9 the bearing. Foot rest : Foot rest made from 15NB Galvanized pipe with end caps welded to two plates forming a foot rest. Duck : Duck is made out of molded plastic in rotational molding process . Rotational Molded Products :The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability. Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness upto 60micron. Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instruments. Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Color:or similar specifications approved by departmental officers at site, ó13.62.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .9 OD25337/2025-2026:Supply and installation of S LOOP CLIMBER Descriptions Product Area : 4.5m X 1.1m (14.8ft X 3.6ft) Safe Play Area : 5.5m X2.1m (7ft X 12ft) Ideal For : 5-12 Years Friends at a time : 5-6 Technical Specification: Vertical support : 80NB Pipe welded together with a flange to form a strong frame withstand both the pitching & yawing moment. The 80NB pipe is hot dip galvanized pipe of height 2950mm with GI thickness upto 60.Top frame : 80NB Pipe welded together with a flange to form a strong frame withstand both the pitching & yawing moment. The 80NB pipe is hot dip galvanized pipe of height 4380mm with GI thickness upto 60.?Clamps : Two 80x20 sized clamps joined together to two 80NB clamps with non rusting nut -bolts made from Nylon Grade-6 plastic. Chain : Hot Dip Galvanized chain of dia 8mm and length 330mm to resist movement of pad in vertical direction & allowing motion of pad in bi-axial direction. S hook : S-HOOK is made up of SS 304 material which is used for mounting the discs to the clamps provided at the top pipe and also for clamping it with chain. Disc pad : The disc pads are made in rotational molding. The pad is fitted onto MS circle of 5 mm thick with GI plating. The plate is grounded with a GI chain and 25 NB GI pipes attached to it. Rotational Molded Products : The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic . Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability. This product is so designed so as to develop physical well being of the child and to increase physical abilities. Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness upto 60micron. Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instrument.s. Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Colour or similar specifications approved by departmental officers at site,-}OD25314/2025-2026:Supply and installation of HOPPER SPRING RIDER Descriptions Product Area : 1m x 0.5m (3.3ft X 1.6ft)Safe Play Area : 2m x 1.5m (6.5ft X 5ft)?Ideal For : 3-6 Years Friends at a time : 1 Technical Specification: Hopper :Hopper is made up of rotational molding process. It has been provided with four bolts. Hopper is bolted to the spring assembly.Spring assembly :It consists of top plate, spring, footrest & square base plate suitably fixed to each other with UBolts. The Spring is made from En47/45 Spring Steel & the two plates are made from MS with GI plating for corrosion resistance Rotational Molded Products : The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability.Foundation Stand :Foundation Stand made of 40NB Galvanized pipe with GI coated plates welded on both ends for fixing the square base on top and foundation angles at bottom.Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness upto 60micron. Pipe Materials or Class: Light Duty ('A' Class) & Medium Duty ('B' Class) Series of pipes only. Wall thickness of pipe varies according to class/Powder coating: It shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50- 70 microns. It is tested for Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Color: Multicolor for optional or customized & according to RAL shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrapOD25316/2025-2026:Supply and installation of PONNY SPRING RIDER Descriptions Product Area : 1m x 0.5m (3.3ft X 1.6ft) Safe Play Area : 2m x 1.5m (6.5ft X 5ft) Ideal For : 3-6 Years ?Friends at a time : 1 Technical Specification: ?Pony :Pony is made up of rotational molding process. It has been provided with four bolts. Pony is bolted to the spring assembly.?Spring assembly :It consists of top plate, spring,footrest & square base plate suitably fixed to each other with U-Bolts. The Spring is made from En47/45 Spring Steel & the two plates are made from MS with GI plating for corrosion resistance. Rotational Molded Products : The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability.Foundation Stand :Foundation Stand made of 40NB Galvanized pipe with GI coated plates welded on both ends for fixing the square base on top and foundation angles at bottom.Pipes: All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thick

Hot Dipped Galvanized Pipes with GI thickness upto 60micron. Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instruments. Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Color:or similar specifications approved by departmental officers at site, }OD28054/2025-2026:Supply and installation of HOPPER SPRING RIDER Descriptions Product Area : 1m x 0.5m (3.3ft X 1.6ft)Safe Play Area : 2m x 1.5m (6.5ft X 5ft)?Ideal For : 3-6 Years Friends at a time : 1 Technical Specification: Hopper :Hopper is made up of rotational molding process. It has been provided with four bolts. Hopper is bolted to the spring assembly.Spring assembly :It consists of top plate, spring, footrest & square base plate suitably fixed to each other with UBolts. The Spring is made from En47/45 Spring Steel & the two plates are made from MS with GI plating for corrosion resistance Rotational Molded Products : The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability.Foundation Stand :Foundation Stand made of 40NB Galvanized pipe with GI coated plates welded on both ends for fixing the square base on top and foundation angles at bottom.Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness upto 60micron. Pipe Materials or Class: Light Duty ('A' Class) & Medium Duty ('B' Class) Series of pipes only. Wall thickness of pipe varies according to class/Powder coating: It shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50- 70 microns. It is tested for Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Color: Multicolor for optional or customized & according to RAL shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrapOD28055/2025-2026:Supply and installation of PONNY SPRING RIDER Descriptions Product Area : 1m x 0.5m (3.3ft X 1.6ft) Safe Play Area : 2m x 1.5m (6.5ft X 5ft) Ideal For : 3-6 Years ?Friends at a time : 1 Technical Specification: ?Pony :Pony is made up of rotational molding process. It has been provided with four bolts. Pony is bolted to the spring assembly.?Spring assembly :It consists of top plate, spring,footrest & square base plate suitably fixed to each other with U-Bolts. The Spring is made from En47/45 Spring Steel & the two plates are made from MS with GI plating for corrosion resistance. Rotational Molded Products : The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability.Foundation Stand :Foundation Stand made of 40NB Galvanized pipe with GI coated plates welded on both ends for fixing the square base on top and foundation angles at bottom.Pipes: All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness upto 60micron.Pipe Materials or Class: Light Duty ('A' Class) & Medium Duty ('B' Class) Series of pipes only. Wall thickness of pipe varies according to class / series of pipe used.Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments. Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Color: Multicolor for optional or customized & according to RAL shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap $
OD28060/2025-2026:Supply and installation of DELUXE SWING Descriptions" Product Area : 2.8m X 1.9m (9.2ft X 6.2ft)" Safe Area : 3.8m X 2.9m (12.5ft X 9.5ft) " Friends at a time : 3 Adults Technical Specification:" Leg pipe :40NB hot dip galvanized swing leg pipe of length 2950mm with GI thickness of 60." Top pipe :50NB hot dip galvanized swing top pipe of length 1895mm with GI thickness of 60 with an ISF conforming to IS 1730-1961 welded at its both ends to junction box. Pipe can withstand torsional stress created du to swinging motion." Junction box :225mmx103mm junction box made from 3mm thick GI Plated plate to house the two swing leg pipes, top pipe & roof frame." Swing clamp assembly :Swing clamps made up of two parts are joined together with M6 Allen bolts along with S-Hook & a specially designed swing pin. The S-Hook is specially designed to house a bearing for smooth & noiseless swinging. The clamps are made from injection molded Nylon-6 plastic." Chain :Rubber dip molded swing chain of dia 6mm." Hook :S-Hook of dia 8mm of Grad SS 304.
OD28061/2025-2026:Supply and installation of DISC CHALLENGER (PGTH-01) Descriptions" Product Area : 4.5m X 1.1m (14.8ft X 3.6ft)" Safe Play Area : 5.5m X2.1m (18ft X 7ft)" Ideal For : 5-12 Years" Friends at a time : 5-6 Technical Specification:" Vertical support : 80NB Pipe welded together with a flange to form a strong frame withstand both the pitching & yawing moment. The 80NB pipe is hot dip galvanized pipe of height 2950mm with GI thickness upto 60." Top frame : 80NB Pipe welded together with a flange to form a strong frame withstand both the pitching & yawing moment. The 80NB pipe is hot dip galvanized pipe of height 4380mm with GI thickness upto 60. " Clamps : Two 80x20 sized clamps joined together to two 80NB clamps with non rusting nut - bolts made from N

utting reinforcement bars. from approved estimate EST No. :IRR/IA/EST/1459/2022_5_6_6 (Edit Id : 5) ÐOD25455/2025-2026:Providing and fixing 50mm GI pipe embedded in cement concrete for fencing including cost of GI pipe and fixing charge of GI pipe etc complete as directed by the departmental officers at site*
4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)ÑOD25453/2025-2026:Supplying and fixing angle iron, M S Flat etc... to G I post including all cost of welding drilling hole etc... for fixing G. I. chain link as per directions of departmental officers at site.¿OD25454/2025-2026:supplying at site steel galvanized steel bolts and nuts 10mm dia and 125mm long round head with slots etc complete as per the direction of the departmental officers at site.Z
16.70.2:Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge.Made of G.I wire of dia 4 mm. PVC coated to achieve outer dia. not less than 5 mm in required colour and shade
OD27585/2025-2026:Providing Colour coated Asphalt roofing Shingles including sufficient length of ridge pieces as roof covering for boat jetty roof neatly laid and water proofing the roof full as per the direction of departmental officers at site EST No. :IRR/KP/EST/1415/2023_5_1_1úOD27586/2025-2026:Name board of size 75x60 cm installed in the apropriate place visible to the public made of brick wall with granite plaque should be inserted and engraving letters etc complete as per the direction of departmental officers at site¨OD27587/2025-2026:Providing and stacking of Trothic Ixora/Chethi Plant of height 20 cm to 30 cm at site including conveyance as per direction of the officer-in-charge.‘OD27588/2025-2026:Lum sum provision for Enhancing the surface with artistic paintings, such as Artera -style art, to improve its aesthetic appeal¤OD27589/2025-2026:Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work“
OD27590/2025-2026:Providing and fixing approved coloured, branded AC Strip Light with Waterproof (IP65 rating), 6W and 120 LEDS per Meter for prefect ambience, superior life and quality withstanding harsh weather. Applicable for bendable or angled patterns, or in continu

100NB G.I Pipe. Handle: 25NB Galvanized pipe bend to form handle of Hip Twister product. Footrest Bend Pipe: 40NB GI pipe is attached with main frame to form a foot rest having 130x50x5 thick plate Standing or Rotating Disc : Standing Disc of 300mm Dia round size shall be made of HDPE/Metal. 15mm thick Sheet and Plate 10mm thick for base support. Bearing: Bearings are oil sealed, self-lubricated made of SKF/ NTN/ NACHI make shall be provided for smooth & trouble-free movement. Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 60micron.Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instruments. Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Color or similar specifications approved by departmental officers at site,- OD25334/2025-2026:Supply and installation of AERIAL STROLLER Descriptions Product Area : 1m x 0.5m (5ft x 2.6ft) Safe Play Area : 2m x 1.5m (7.2ft x 4.9ft) Ideal For : 13 Years & above Function:?Strengthens Leg Muscles. Lower body workout Technical Specification: Post Dia: The Aerial Stroller having Ergonomic design with 100NB GI main vertical support pipe of Aerial Stroller is fixed over 10mm thick base plate. Clamping plates are attached to main frame to hold the rest of assemblies. Footrest and Handles: Footrest bend and Handle having 40NB and 25NB Dia galvanized pipe respectively The materials used for footrest is aluminum/LLDPE/HDPE/Nylon. Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 60micron. Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instruments. Bearing Housing shall be made from MS material. Bearing: Bearings are oil sealed, self-lubricated made of SKF/ NTN/ NACHI / FAG / NRB make shall be provided for smooth & trouble-free movement.Pins and Circlips: Pins shall be made from EN8/ MS material & Circlips made from standard material.Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety agains entrapment. Colour or similar specifications approved by departmental officers at site, OD25324/2025-2026:Supply and installation of FISH BIN Descriptions Product Area : 0.3m Dia. (1.3ft Dia.)?Height : 0.7m (2.6ft) Capacity : 84 Ltrs Technical Specification: Fish Bin : Fish bin is made up of Fiber reinforced plastic(FRP).This innovative fish dust-bin is designed for accomodating dry as well as wet kind of trash in the garden or public places.The fish dustbin has shape, size and parts that of a fish which looks like a real fish and the trash can be put through inside the mouth of the fish.FRP products :All the Fibre Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type.We use international quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required colour to the product.Thickness of the FRP material varies from 3 mm to 5 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test)b. Color or similar specifications approved by departmental officers at site,-¤OD25341/2025-2026:Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work‘5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform‘5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers 5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and StrutsN
12.13.2:Providing and fixing fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing accessories in all colours with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete:Eave's filler piecesG
12.13.6:Providing and fixing fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing accessories in all colours with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete:Ridge finialspairÀ13.17:6 mm cement plaster 1:3 ( 1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams.8.2.2.2:Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm«
OD25318/2025-2026:Supplying and fixing Table top wash basin (Size 580x380x110mm) or nearest size wash hand basin including supplying and fixing waste coupling, pillar tap (Heavy, best quality) 1 no., 32mm PVC waste pipe and 15mm heavy duty PVC connection 1 no 15mm CP Brass angle valve including cutting and making good the walls etc. complete. - CERA CATMID Snow white or equivalent EST No. :OEO/TRIDA/EST/430/2025_5_1_1 
OD25335/2025-2026:Providing Colour coated Asphalt roofing Shingles including sufficient length of ridge pieces as roof covering for boat jetty roof neatly laid and water proofing the roof full as per the direction of departmental officers at site EST No. :IRR/KP/EST/1415/2023_5_1_1Å13.80:Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.‡13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work_
OD25330/2025-2026:51.19.ST3. Supplying and installing ready made PVC Septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer incharge (Provision for CC/RCC/Sand/06mm aggregate for the preparation of bed shall be paid separately) 3. 25 to below 35 flush capacity )OD25322/2025-2026:Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge—10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required siz

in.The S-Hook is specially designed to house a bearing for smooth & noiseless swinging. The clamps are made from injection molded Nylon-6 plastic. 2) Chain : Rubber dip molded swing1NO 56,521.00 56,521.00 5 chain of dia. 6mm & 1450mm Long. 3) Hook : S-Hook of dia 8mm & 145x130 Triangular hook. 4) Seat : Rubber Seat made by Natural Rubber with sufficient reinforcement. •Powder coating : It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instrument. •Bearing: Bearing is self-lubricated made of SKF/ NTN/ NACHI make shall be provided for smooth & trouble-free movement. •Pins and Circlips: 12mm diameter pins shall be made from EN8 material & Circlip A10. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Color: Multicolor or similar specifications approved by departmental officers at site٤伀㉄〸㘵㈯㈰ⴵ〲㘲区灵汰⁹湡⁤湩瑳污慬楴湯漠⁦䡃卅♔䡓問䑌剅䌠䵏䥂䅎䥔乏䐠獥牣灩楴湯⁳牐摯捵⁴牁慥਍›⸱洸砠ㄠ㘨瑦砠㌠㔮瑦 慓敦瀠慬⁹牁慥㨠㌠㠮⁸洲⠠〱瑦砠㜠瑦䘩湵瑣潩㩮匠牴湥瑧敨獮䌠敨瑳਍畭捳敬ⱳ䘠牯慥浲⁳…牔捩灥⹳吠捥湨捩污匠数楣楦慣楴湯›慍湩䘠慲敭›桔⁥慭湩映慲敭漠⁦桃獥൴倊敲獳搠畯汢⁥獩洠摡⁥牦浯ㄠ〰䉎䜠⁉楐数മ匊慥⁴牦浡㩥匠慥⁴牆浡⁥慭敤映潲㈳䉎䜠⁉楰数‮慍整楲污甠敳⁤潦⁲敳瑡愠敲䰠䑌䕐⠠楌敮牡਍潌⁷敄獮瑩⁹潐祬瑥票敬敮 楷桴唠⁖瑳扡汩穩瑡潩景䘠潯⁤片摡⁥潎慈慺摲畯⁳汐獡楴⹣਍桔捩湫獥⁳景琠敨删呏⁏牰摯捵獴瘠牡敩⁳牦浯㔠洠潴㠠洠獡瀠牥琠敨瀠潲畤瑣‮桔⁥癯牥污൬瀊潲畤瑣漠瑢楡獩愠猠慥汭獥⁳潴攠獮牵⁥数晲捥⁴敬摮漠⁦湵晩牯桴捩湫獥⁳…畤慲楢楬祴‮慈摮敬ഺ䠊湡汤⁥牦浡⁥獩洠摡⁥牦浯㌠串⁂湡⁤㔲䉎䜠⁉楐数‮慍整楲污甠敳⁤潦⁲慨摮牧灩椠⁳偅䵄਍攨桴汹湥⁥牰灯汹湥⁥楤湥⁥潭潮敭⥲删扵敢⹲潆瑯爠獥㩴㌠串⁂䥇洠瑡牥慩楰数椠⁳獵摥映牯਍潦瑯敲瑳‮敂牡湩㩧䈠慥楲杮⁳牡⁥楯敳污摥‬敳晬氭扵楲慣整⁤慭敤漠⁦䭓⽆丠乔 䅎䡃⁉慭敫਍桳污敢瀠潲楶敤⁤潦⁲浳潯桴☠琠潲扵敬昭敲⁥潭敶敭瑮‮瑏敨獲›湉整湲污氠捯潴氠浩瑩琠敨਍潭敶敭瑮倠灩獥›汁敭慴楰数⁳牡⁥潈⁴楄灰摥䜠污慶楮敺⁤楐数⁳楷桴䜠⁉桴捩湫獥⁳景㐠ⴰ਍〶業牣湯倮睯敤⁲潣瑡湩㩧䤠⁴桳污敢搠湯⁥楷桴瀠牵⁥潰祬獥整⁲慲⁷慭整楲污‮牄⁹楦浬਍桔捩湫獥⁳慭湩慴湩摥眠瑩楨桴⁥慲杮⁥景㔠ⴰ〷洠捩潲獮‮瑉椠⁳整瑳摥映牯愠桤獥潩整瑳眠瑩⁨桴൥栊汥⁰景挠潲獳栠瑡档挠瑵整⁲湩瑳畲敭瑮⹳畎⁴湡⁤潂瑬㩳䜠污慶楮敺⽤匠匮⼮汁敬潂瑬䈯瑵潴效摡਍汁敬潂瑬☠丠瑵⁳ 祎潬潌正丠瑵⁳牡⁥獵摥眠瑩⁨噐⁃潂瑬䌠灡⹳䄠汬漠数湥獤漠⁦楰数戠敥൮挊潬敳⁤祢䜠⁉ 噐⁃慣獰映牯甠敳⁲慳敦祴愠慧湩瑳攠瑮慲浰湥⹴䌠汯畯⁲牯猠浩汩牡猠数楣楦慣楴湯൳愊灰潲敶⁤祢搠灥牡浴湥慴景楦散獲愠⁴楳整䑏㠲㔰⼷〲㔲㈭㈰㨶畓灰祬愠摮椠獮慴汬瑡潩景䰠䝅倠䕒卓䐠問䱂⁅呓乁䅄䑒䐠獥牣灩楴湯⁳牐摯捵⁴牁慥㨠਍⸲㔰⁘⸰洵⠠⸶㌷瑆堠ㄠ㘮䘴⥴匠晡⁥汐祡䄠敲⁡›⸳㔰⁘⸱洵⠠〱瑆堠㔠瑆ഩ䘊湵瑣潩㩮圠牯潫瑵漠⁦桴杩⁨湡⁤慣晬⁳瑓敲杮桴湥湩⁧敌獧吠捥湨捩污匠数楣楦慣楴湯›潐瑳䐠慩›〸䉎䜠⁉慭湩瘠牥楴慣畳灰牯⁴楰数漠⁦敌⁧牐獥⁳潄扵敬椠⁳楦數⁤癯牥ㄠ洰桴捩慢敳瀠慬整മㄊ洰桴捩汣浡楰杮瀠慬整⁳牡⁥瑡慴档摥琠慭湩映慲敭琠潨摬琠敨爠獥⁴景愠獳浥汢敩⹳匠慥൴昊慲敭›敓瑡䘠慲敭洠摡⁥牦浯㐠丰⁂敢摮䜠⁉楰数⁳湡⁤慍整楲污甠敳⁤潦⁲敳瑡椠⁳䑈䕐⠠楈桧䐠湥楳祴倠汯敹桴汹湥⥥唠⁖瑳扡汩獩摥䰯䑌䕐‮桔獩猠慥⁴牦浡⁥獩洠畯瑮摥漠敶瑲捩污猠灵潰瑲਍楰数琠牨畯桧猠数楣污祬搠獥杩敮⁤敢牡湩⁧潨獵湩獧‮潆瑯爠獥㩴䘠潯牴獥⁴畳灰牯⁴潴戠⁥景㈠丵⁂⹇⁉楐数‮桔⁥慭整楲污⁳獵摥映牯映潯牴獥⁴獩䄠畬業畮൭挊獡楴杮䰯䑌䕐䠯偄⽅祎潬⹮䈠慥楲杮䠠畯楳杮猠慨汬戠⁥慭敤映潲卍洠瑡牥慩⹬䈠慥楲杮ഺ䈊慥楲杮⁳牡⁥楯敳污摥‬敳晬氭扵楲慣整⁤慭敤漠⁦䭓⽆丠乔 䅎䡃⁉ 䅆⁇慭敫猠慨汬戠൥瀊潲楶敤⁤潦⁲浳潯桴☠琠潲扵敬昭敲⁥潭敶敭瑮‮楐数㩳䄠汬洠瑥污瀠灩獥愠敲䠠瑯䐠灩数൤䜊污慶楮敺⁤楐数⁳楷桴䜠⁉桴捩湫獥⁳景㐠ⴰ〶業牣湯മ倊睯敤⁲潣瑡湩㩧䤠⁴桳污敢搠湯⁥楷桴瀠牵⁥潰祬獥整⁲慲⁷慭整楲污‮牄⁹楦浬吠楨正敮獳਍慭湩慴湩摥眠瑩楨桴⁥慲杮⁥景㔠ⴰ〷洠捩潲獮‮瑉椠⁳整瑳摥映牯愠桤獥潩整瑳眠瑩⁨桴⁥敨灬漠⁦牣獯൳栊瑡档挠瑵整⁲湩瑳畲敭瑮⹳丠瑵愠摮䈠汯獴›慇癬湡穩摥匯匮⼮汁敬潂瑬䈯瑵潴效摡䄠汬湥䈠汯⁴ദ上瑵⁳ 祎潬潌正丠瑵⁳牡⁥獵摥眠瑩⁨噐⁃潂瑬䌠灡⹳䄠汬漠数湥獤漠⁦楰数戠敥汣獯摥戠⁹䥇਍ 噐⁃慣獰映牯甠敳⁲慳敦祴愠慧湩瑳攠瑮慲浰湥⹴਍敃瑲晩捩瑡㩥䤠体〹㄰㈺㄰‵潃潬㩲䴠汵楴潣潬⁲潦⁲灯楴湯污漠⁲畣瑳浯穩摥愠摮愠⁳数⁲䅒⁌桓摡⹥਍慐正条湩㩧匠晡瑥⁹″慬敹⁲慰正条湩⁧楬敫ㄠ瑳䔠䕐䘠慯渲⁤䑈䕐䘠汩湡⁤爳⁤獩匠牴瑥档਍牷灡‮潎整›浉条獥愠敲漠汮⁹潦⁲敲敦敲据獥‮捁畴污倠潲畤瑣漠⁲潣潬牵漠⁦桴⁥牰摯捵⁴慭⁹慶祲漮䑏㠲㔰⼸〲㔲㈭㈰㨶畓灰祬愠摮椠獮慴汬瑡潩景䠠偉吠䥗呓剅䐠問䱂⁅敄捳楲瑰潩獮倠潲畤瑣䄠敲⁡›⸱洲砠〠㤮൭⠊⸳昹⁴⁸昳⥴匠晡⁥汐祡䄠敲⁡›⸲洲砠ㄠ㤮㤨㠮昵⁴⁸⸵昳⥴䤠敤污䘠牯㨠ㄠ″教牡⁳…扡癯൥䘊湵瑣潩㩮瑓敲捴敨⁳慷獩⁴…灕数⁲潂祤‮敔档楮慣灓捥晩捩瑡潩㩮䴠楡畓灰牯㩴吠敨洠楡൮猊灵潰瑲漠⁦楈⁰睴獩整⁲潣獮獩⁴景ㄠ〰䉎䜠䤮倠灩⹥਍慈摮敬›㔲䉎䜠污慶楮敺⁤楰数戠湥⁤潴映牯慨摮敬漠⁦楈⁰睔獩整⁲牰摯捵⹴਍潆瑯敲瑳䈠湥⁤楐数›〴䉎䜠⁉楰数椠⁳瑡慴档摥眠瑩⁨慭湩映慲敭琠潦浲愠映潯⁴敲瑳栠癡湩൧ㄊ〳㕸砰‵桴捩汰瑡⁥瑓湡楤杮漠⁲潒慴楴杮䐠獩⁣›瑓湡楤杮䐠獩⁣景㌠〰浭䐠慩爠畯摮猠穩⁥桳污൬戊⁥慭敤漠⁦䑈䕐䴯瑥污‮㔱浭琠楨正匠敨瑥愠摮倠慬整ㄠ洰桴捩潦⁲慢敳猠灵潰瑲‮敂牡湩㩧䈠慥楲杮⁳牡⁥楯敳污摥‬敳晬氭扵楲慣整⁤慭敤漠⁦䭓⽆丠乔 䅎䡃⁉慭敫猠慨汬戠⁥牰癯摩摥映牯਍浳潯桴☠琠潲扵敬昭敲⁥潭敶敭瑮‮楐数㩳䄠汬洠瑥污瀠灩獥愠敲䠠瑯䐠灩数⁤慇癬湡穩摥倠灩獥眠瑩൨䜊⁉桴捩湫獥⁳景㘠洰捩潲⹮潐摷牥挠慯楴杮›瑉猠慨汬戠⁥潤敮眠瑩⁨異敲瀠汯敹瑳牥爠睡洠瑡牥慩⹬਍牄⁹楦浬吠楨正敮獳洠楡瑮楡敮⁤楷桴湩琠敨爠湡敧漠⁦〵㜭‰業牣湯⹳䤠⁴獩琠獥整⁤潦⁲摡敨楳湯琠獥൴眊瑩⁨桴⁥敨灬漠⁦牣獯⁳慨捴⁨畣瑴牥椠獮牴浵湥獴‮畎⁴湡⁤潂瑬㩳䜠污慶楮敺⽤匠匮⼮汁敬൮䈊汯⽴畂瑴湯䠠慥⁤汁敬潂瑬☠丠瑵⁳ 祎潬潌正丠瑵⁳牡⁥獵摥眠瑩⁨噐⁃潂瑬䌠灡⹳䄠汬漠数൮攊摮⁳景瀠灩⁥敢湥挠潬敳⁤祢䜠⁉ 噐⁃慣獰映牯甠敳⁲慳敦祴愠慧湩瑳攠瑮慲浰湥⹴䌠汯牯漠⁲楳業慬൲猊数楣楦慣楴湯⁳灡牰癯摥戠⁹敤慰瑲敭瑮污漠晦捩牥⁳瑡猠瑩ⱥഭЊ䑏㠲㔰⼹〲㔲㈭㈰㨶畓灰祬愠摮椠獮慴汬瑡潩景䄠剅䅉⁌呓佒䱌剅䐠獥牣灩楴湯⁳牐摯捵⁴牁慥㨠ㄠ⁸⸰洵⠠昵⁴൸㈊㘮瑦 慓敦倠慬⁹牁慥㨠㈠⁸⸱洵⠠⸷昲⁴⁸⸴昹⥴䤠敤污䘠牯㨠ㄠ″教牡⁳…扡癯൥䘊湵瑣潩㩮匿牴湥瑧敨獮䰠来䴠獵汣獥‮潌敷⁲潢祤眠牯潫瑵吠捥湨捩污匠数楣楦慣楴湯›潐瑳䐠慩ഺ吊敨䄠牥慩瑓潲汬牥栠癡湩⁧牅潧潮業⁣敤楳湧眠瑩⁨〱丰⁂䥇洠楡敶瑲捩污猠灵潰瑲瀠灩⁥景਍敁楲污匠牴汯敬⁲獩映硩摥漠敶⁲〱浭琠楨正戠獡⁥汰瑡⹥䌠慬灭湩⁧汰瑡獥愠敲愠瑴捡敨⁤潴洠楡牦浡൥琊潨摬琠敨爠獥⁴景愠獳浥汢敩⹳਍潆瑯敲瑳愠摮䠠湡汤獥›潆瑯敲瑳戠湥⁤湡⁤慈摮敬栠癡湩⁧〴䉎愠摮㈠丵⁂楄⁡慧癬湡穩摥瀠灩൥爊獥数瑣癩汥⁹桔⁥慭整楲污⁳獵摥映牯映潯牴獥⁴獩愠畬業畮⽭䱌偄⽅䑈䕐丯汹湯മ倊灩獥›汁敭慴楰数⁳牡⁥潈⁴楄灰摥䜠污慶楮敺⁤楐数⁳楷桴䜠⁉桴捩湫獥⁳景㘠洰捩潲⹮਍潐摷牥挠慯楴杮›瑉猠慨汬戠⁥潤敮眠瑩⁨異敲瀠汯敹瑳牥爠睡洠瑡牥慩⹬䐠祲映汩桔捩湫獥൳洊楡瑮楡敮⁤楷桴湩琠敨爠湡敧漠⁦〵㜭‰業牣湯⹳䤠⁴獩琠獥整⁤潦⁲摡敨楳湯琠獥⁴楷桴琠敨栠汥⁰景挠潲獳਍慨捴⁨畣瑴牥椠獮牴浵湥獴‮敂牡湩⁧潈獵湩⁧桳污敢洠摡⁥牦浯䴠⁓慭整楲

t site including conveyance as per direction of the officer-in-charge.¿OD28343/2025-2026:Providing and Stacking of GOLDEN BAMBOO -Phyllostachys Aurea, having ht. 90 cm to 1.20 m , well developed, fresh, and healthy as per the direction of the officer in-charge.ÓOD28344/2025-2026:Supplying and Providing Victoria bench (150cm x 60 cm), with FRP streap 3 seater heavy duty garden bench for outdoor powder coated for a smooth finish washable and waterproof ,wooden finish ‘OD28347/2025-2026:Lum sum provision for Enhancing the surface with artistic paintings, such as Artera -style art, to improve its aesthetic appeal¤OD28348/2025-2026:Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work§
OD28349/2025-2026:Finishing the front side of existing compound wall with art design paint as per drawing using Acrylic Smooth exterior paint of required shade, Two or more coat including applying additional coats wherever required applied over and including priming coat of exterior primer , to achieve even shade and colour, cost for scaffolding, charges for artist ,etc complete EST No. :OEO/TRIDA/EST/430/2025_5_1_1 ÇOD28350/2025-2026:Supply, conveyance, installation, testing and commissioning of 30W Integrated Solar LED light fitting with all accessories. Each unit should include 18V,75W panel with Grade A solar cells, 24Ah, 12.8V LiFePO4 type battery, Luminaire housing component to be Aluminium alloy with powder paint, IP65, LED chip shall be Philips/Osram, THD <10%, efficiency greater than 85%,3800-4500 lumens,etc. as required with 5years warranty . Luminaire shall be suitable for mounting at a height of 5-6m, should have 24hrs autonomy, PIR sensor for better efficient lighting. Certifications:MNRE/IEC/BIS/LM80/ROHS/IP65) from approved estimate EST No. :IRR/IA/EST/1459/2022_5_6_6 (Edit Id : 5)6
OD28351/2025-2026:Supply and erection of Decorative tubular stainless steel pole having 5 mtr height, 2.5-2inch outer dia made from min. 2mm thick plate for fixing of solar light, all other incidental and miscellaneous charges complete from approved estimate EST No. :IRR/IA/EST/1459/2022_5_6_6 (Edit Id : 5)

…楃捲楬獰洠摡⁥牦浯猠慴摮牡⁤慭整楲污丮瑵愠摮䈠汯獴›慇癬湡穩摥 ⹓⹓䄯汬湥਍潂瑬䈯瑵潴效摡䄠汬湥䈠汯⁴…畎獴⼠丠汹湯䰠捯畎獴愠敲甠敳⁤楷桴倠䍖䈠汯⁴慃獰‮汁灯湥਍湥獤漠⁦楰数戠敥汣獯摥戠⁹䥇⼠倠䍖挠灡⁳潦⁲獵牥猠晡瑥⁹条楡獮攠瑮慲浰湥⹴਍潃潬牵漠⁲楳業慬⁲灳捥晩捩瑡潩獮愠灰潲敶⁤祢搠灥牡浴湥慴景楦散獲愠⁴楳整儬
〵ㄮ⸸⸸⸷㨲牐癯摩湩⁧湡⁤楦楸杮倠䍖瀠灩獥‬楦瑴湩獧椠据畬楤杮映硩湩⁧桴⁥楰数眠瑩⁨汣浡獰愠⁴⸱〰洠猠慰楣杮‮桔獩椠据畬敤⁳潪湩楴杮漠⁦楰数⁳楷桴漠敮猠整⁰噐⁃潳癬湥⁴散敭瑮愠摮琠獥楴杮漠⁦潪湩獴挠浯汰瑥⁥獡瀠牥搠物捥楴湯漠⁦湅楧敮牥椭⵮桃牡敧‮潃据慥敬⁤潷歲‬湩汣摵湩⁧畣瑴湩⁧档獡獥愠摮洠歡湩⁧潧摯琠敨眠污瑥⁣㌶洠楰数㐠欠晧 浣㘲
〵ㄮ⸸⸹㌱㈮债潲楶楤杮愠摮映硩湩⁧噐⁃楰数ⱳ映瑩楴杮⁳湩汣摵湩⁧楦楸杮琠敨瀠灩⁥楷桴挠慬灭⁳瑡ㄠ〮‰灳捡湩⹧吠楨⁳湩汣摵獥樠楯瑮湩⁧景瀠灩獥☠映瑩楴杮⁳楷桴漠敮猠整⁰噐⁃潳癬湥⁴散敭瑮愠摮琠獥楴杮漠⁦潪湩獴挠浯汰瑥⁥獡瀠牥搠物捥楴湯漠⁦湅楧敮牥椭⵮桃牡敧㈠‵浭搠慩ㄠ‰杋⽦浣ⴲ䔠瑸牥慮潷歲ⴠ䔠灸獯摥漠慷汬Ĵ㔀⸰㠱㤮ㄮ⸵㨱牐癯摩湩⁧湡⁤楦楸杮倠䍖瀠灩獥‬楦瑴湩獧椠据畬楤杮映硩湩⁧桴⁥楰数眠瑩⁨汣浡獰愠⁴⸱〰洠猠慰楣杮‮桔獩椠据畬敤⁳潪湩楴杮漠⁦楰数⁳…楦瑴湩獧眠瑩⁨湯⁥瑳灥倠䍖猠汯敶瑮挠浥湥⁴湡⁤整瑳湩⁧景樠楯瑮⁳潣灭敬整愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湩䌭慨杲⁥〴洠楤⁡〱杋⽦浣ⴲ䔠瑸牥慮潷歲‭硅潰敳⁤湯眠污镬〵ㄮ⸸⸹〲ㄮ债潲楶楤杮愠摮映硩湩⁧噐⁃潭汵敤⁤楦瑴湩獧 捡散獳牯敩⁳潦⁲楒楧⁤噐⁃楰数ⱳ椠据畬楤杮樠楯瑮湩⁧楷桴倠䍖猠汯敶瑮挠浥湥⁴‭㌶洠楤⁡汅潢魷〵ㄮ⸸⸹〲㈮债潲楶楤杮愠摮映硩湩⁧噐⁃潭汵敤⁤楦瑴湩獧 捡散獳牯敩⁳潦⁲楒楧⁤噐⁃楰数ⱳ椠据畬楤杮樠楯瑮湩⁧楷桴倠䍖猠汯敶瑮挠浥湥⁴㘭″楤⁡㔴搠来敲⁥汅潢靷〵ㄮ⸸⸹〲㔮债潲楶楤杮愠摮映硩湩⁧噐⁃潭汵敤⁤楦瑴湩獧愯捣獥潳楲獥映牯删杩摩倠䍖瀠灩獥椠据畬楤杮樠楯瑮湩⁧楷桴倠䍖猠汯敶瑮挠浥湥⁴‭㌶㙸砳㌶洠楤⁡敔鵥〵ㄮ⸸⸹ㄲ㈮债潲楶楤杮愠摮映硩湩⁧噐⁃潭汵敤⁤楦瑴湩獧愯捣獥潳楲獥映牯删杩摩倠䍖瀠灩獥‬湩汣摵湩⁧潪湩楴杮眠瑩⁨噐⁃潳癬湥⁴散敭瑮ⴠ㔷洠楤⁡㔴搠来敲⁥汅潢驷〵ㄮ⸸⸹ㄲ㌮债潲楶楤杮愠摮映硩湩⁧噐⁃潭汵敤⁤楦瑴湩獧⼠愠捣獥潳楲獥映牯删杩摩倠䍖瀠灩獥‬湩汣摵湩⁧潪湩楴杮眠瑩⁨噐⁃潳癬湥⁴散敭瑮ⴠ㔷洠楤⁡潄牯䔠扬睯 㔀⸰㠱㤮㈮⸱㨹牐癯摩湩⁧湡⁤楦楸杮倠䍖洠畯摬摥映瑩楴杮⽳愠捣獥潳楲獥映牯删杩摩倠䍖瀠灩獥‬湩汣摵湩⁧潪湩楴杮眠瑩⁨噐⁃潳癬湥⁴散敭瑮ⴠ㜠‵浭搠慩匠捯敫⁴振畯汰湩ꁧ〵ㄮ⸸⸹㈲ㄮ㨱牐癯摩湩⁧湡⁤楦楸杮倠䍖洠畯摬摥映瑩楴杮⽳捡散獳牯敩⁳潦⁲楒楧⁤噐⁃楰数ⱳ湩汣摵湩⁧潪湩楴杮眠瑩⁨噐⁃潳癬湥⁴散敭瑮ⴠㄠ〱洠楤⁡潓正瑥 潣灵楬杮¡㔀⸰㠱㤮㈮⸲㨲牐癯摩湩⁧湡⁤楦楸杮倠䍖洠畯摬摥映瑩楴杮⁳ 捡散獳牯敩⁳潦⁲楒楧⁤噐⁃楰数ⱳ椠据畬楤杮樠楯瑮湩⁧楷桴倠䍖猠汯敶瑮挠浥湥⁴‭ㄱ‰浭搠慩㐠‵敤牧敥䔠扬睯”㔀⸰㠱㤮㈮⸲㨴牐癯摩湩⁧湡⁤楦楸杮倠䍖洠畯摬摥映瑩楴杮⽳愠捣獥潳楲獥映牯删杩摩倠䍖瀠灩獥‬湩汣摵湩⁧潪湩楴杮眠瑩⁨噐⁃潳癬湥⁴散敭瑮‭ㄱ‰浭搠慩䈠湥핤〵ㄮ⸸⸹⸳㨲牐癯摩湩⁧湡⁤楦楸杮倠䍖瀠灩獥椠据畬敤⁳潪湩楴杮漠⁦楰数⁳楷桴漠敮猠整⁰噐⁃潳癬湥⁴散敭瑮‬牴湥档湩Ⱨ爠晥汩楬杮☠琠獥楴杮漠⁦潪湩獴挠浯汰瑥⁥獡瀠牥搠物捥楴湯漠⁦湅楧敮牥椠桃牡敧‮㔲洠楤⁡〱䝋⽆浣픲〵ㄮ⸸⸹⸵㨱牐癯摩湩⁧湡⁤楦楸杮倠䍖瀠灩獥椠据畬楤杮⁳潪湩楴杮漠⁦楰数⁳楷桴漠敮猠整⁰噐⁃潳癬湥⁴散敭瑮‬牴湥档湩⁧敲楦汬湩⁧…整瑳湩⁧景樠楯瑮⁳潣灭敬整愠⁳数⁲楤敲瑣潩景䔠杮湩敥⁲湩䌠慨杲⁥〴洠楤⁡〱杋⽦浣턲〵ㄮ⸸⸹⸸㨲牐癯摩湩⁧湡⁤楦楸杮倠䍖瀠灩獥椠据畬楤杮⁳景瀠灩獥眠瑩⁨湯⁥瑳灥倠䍖猠汯敶瑮挠浥湥ⱴ琠敲据楨杮愠摮爠晥汩楬杮☠琠獥楴杮漠⁦潪湩獴挠浯汰瑥⁥獡瀠牥搠物捥楴湯漠⁦湅楧敮牥椠桃牡敧‮㔷洠楤⁡‴杋⽦浣弲
䑏㠲㠱⼷〲㔲㈭㈰㨶ㄵㄮ⸹呓⸳匠灵汰楹杮愠摮椠獮慴汬湩⁧敲摡⁹慭敤倠䍖匠灥楴⁣慴歮椠据畬楤杮琠敨挠獯⁴景挠牡楲条ⱥ਍牴湥档湩Ⱨ瀠慬楣杮愠⁴桴⁥敬敶敢潬⁷牧畯摮氠癥汥愠⁳灳捥晩敩⁤獡瀠牥琠敨搠物捥楴湯漠⁦湥楧敮牥椠据慨杲⁥倨潲楶楳湯映牯䌠⽃䍒⽃慓摮〯洶条牧来瑡⁥潦⁲桴⁥牰灥牡瑡潩景戠摥猠慨汬戠⁥慰摩਍敳慰慲整祬ഩ㌊‮㔲琠敢潬⁷㔳映畬桳挠灡捡瑩൹Ԋ㜱㔮ㄮ债潲楶楤杮愠摮映硩湩⁧桷瑩⁥楶牴潥獵挠楨慮映慬⁴慢正栠污⁦瑳污牵湩污漠⁦楳敺㔠〸㍸〸㍸〵洠楷桴眠楨整倠䍖愠瑵浯瑡捩映畬桳湩⁧楣瑳牥Ɱ眠瑩⁨楦瑴湩獧‬瑳湡慤摲猠穩⁥⹃⹐戠慲獳映畬桳瀠灩ⱥ猠牰慥敤獲眠瑩⁨湵潩獮愠摮挠慬灭⁳愨汬椠⹃⹐戠慲獳 楷桴眠獡整映瑩楴杮愠⁳数⁲卉㨠㈠㔵ⰶ䌠䤮‮牴灡眠瑩⁨畯汴瑥朠慲楴杮愠摮漠桴牥挠畯汰湩獧椠⹃⹐戠慲獳‬湩汣摵湩⁧慰湩楴杮漠⁦楦瑴湩獧愠摮挠瑵楴杮愠摮洠歡湩⁧潧摯琠敨眠污獬愠摮映潬牯⁳桷牥癥牥爠煥極敲㩤楓杮敬栠污⁦瑳污牵湩污眠瑩⁨‵楬牴⁥噐⹃愠瑵浯瑡捩映畬桳湩⁧楣瑳牥䙮
㜱㜮㜮债潲楶楤杮愠摮映硩湩⁧慷桳戠獡湩眠瑩⁨⹃⹉戠慲正瑥ⱳㄠ‵浭䌠倮‮牢獡⁳楰汬牡琠灡ⱳ㌠′浭䌠倮‮牢獡⁳慷瑳⁥景猠慴摮牡⁤慰瑴牥Ɱ椠据畬楤杮瀠楡瑮湩⁧景映瑩楴杮⁳湡⁤牢捡敫獴‬畣瑴湩⁧湡⁤慭楫杮朠潯⁤桴⁥慷汬⁳桷牥癥牥爠煥極敲场楨整嘠瑩敲畯⁳桃湩⁡汆瑡戠捡慷桳戠獡湩猠穩⁥㔴砰〳‰浭眠瑩⁨楳杮敬ㄠ‵浭䌠倮‮牢獡⁳楰汬牡琠灡㄀⸷㨸牐癯摩湩⁧湡⁤楦楸杮眠楨整瘠瑩敲畯⁳档湩⁡数敤瑳污映牯眠獡⁨慢楳潣灭敬整祬爠捥獥敳⁤瑡琠敨戠捡潦⁲桴⁥敲散瑰潩景瀠灩獥愠摮映瑩楴杮⹳‰㄀⸷㠲ㄮㄮ债潲楶楤杮愠摮映硩湩⁧⹐⹖⹃眠獡整瀠灩⁥潦⁲楳歮漠⁲慷桳戠獡湩椠据畬楤杮倠䍖മ眊獡整映瑩楴杮⁳潣灭敬整ਮ敓業爠杩摩瀠灩㍥′浭搠慩Θ㄀⸹⸷⸱㨱潃獮牴捵楴杮戠楲正洠獡湯祲洠湡潨敬椠散敭瑮洠牯慴⁲㨱‴ ‱散敭瑮㨠㐠挠慯獲⁥慳摮 楷桴删䌮䌮‮潴⁰楷桴ㄠ㈺㐺洠硩⠠‱散敭瑮㨠㈠挠慯獲⁥慳摮㨠㐠朠慲敤⁤瑳湯⁥条牧来瑡⁥〲洠潮業慮楳敺Ⱙ映畯摮瑡潩潣据敲整ㄠ㐺㠺洠硩⠠ㄠ挠浥湥⁴›‴潣牡敳猠湡⁤›‸牧摡摥猠潴敮愠杧敲慧整㐠‰浭渠浯湩污猠穩ⱥ 湩楳敤瀠慬瑳牥湩⁧㈱洠桴捩楷桴挠浥湥⁴潭瑲牡ㄠ㌺⠠ㄠ挠浥湥⁴›″潣牡敳猠湡⥤映湩獩敨⁤楷桴映潬瑡湩⁧潣瑡漠⁦敮瑡挠浥湥⁴湡⁤慭楫杮挠慨湮汥⁳湩挠浥湥⁴潣据敲整ㄠ㈺㐺⠠ㄠ挠浥湥⁴›′潣牡敳猠湡⁤›‴牧摡摥猠潴敮愠杧敲慧整㈠‰浭渠浯湩污猠穩⁥ 楦楮桳摥眠瑩⁨⁡汦慯楴杮挠慯⁴景渠慥⁴散敭瑮挠浯汰瑥⁥獡瀠牥猠慴摮牡⁤敤楳湧਺湉楳敤猠穩⁥〹㡸‰浣愠摮㐠‵浣搠敥⁰湩汣摵湩⁧⹃⹉挠癯牥眠瑩⁨牦浡⁥氨杩瑨搠瑵⥹㐠㔵㙸〱洠湩整湲污搠浩湥楳湯ⱳ琠瑯污眠楥桧⁴景挠癯牥愠摮映慲敭琠敢渠瑯氠獥⁳桴湡㌠‸杫⠠敷杩⁨景挠癯牥㈠″杫愠摮眠楥桧⁴景映慲敭ㄠ‵杫㨩楗桴挠浯潭畢湲⁴汣祡䘠倮匮‮渨湯洠摯汵牡 牢捩獫漠⁦汣獡⁳敤楳湧瑡潩⸷䨵䑏㠲㜲⼲〲㔲㈭㈰㨶牄癩湩⁧潤湷删䍃瀠汩獥漠⁦〳洰煳慵敲椠楳敺琠桴⁥敲畱物摥搠灥桴椠楬敮愠摮氠癥汥⁳潴猠晡൥眊牯楫杮氠慯獤‬湩汣摵湩⁧桳晩楴杮琠敨挠獡整⁤楰敬⁳潴琠敨搠楲楶杮猠潰⁴楷桴畯⁴慤慭楧杮琠敨瀠汩൥眊瑩⁨敮散獳牡⁹楬瑦湩⁧煥極浰湥獴‬汰捡湩⁧湩挠牯敲瑣瀠獯瑩潩潴氠湩⁥湡⁤牤癩湩⁧潤湷琠൯爊煥極敲⁤敤瑰⁨楷桴琠敨栠汥⁰景搠楲楶杮攠畱灩敭瑮椠据畬楤杮栠物⁥档牡敧⁳潦⁲牤癩湩⁧煥極浰湥ⱴ਍慭档湩牥ⱹ汰湡獫‬畦汥ⱳ氠扡畯⁲档牡敧⁳瑥⁣潣灭敬整愠⁳数⁲桴⁥楤敲瑣潩景琠敨搠灥牡浴湥慴൬漊晦捩牥⁳瑡猠瑩⁥牦浯愠灰潲敶⁤獥楴慭整䔠呓丠⹯㨠剉⽒䅉䔯呓ㄯ㔴⼹〲㈲㕟㙟㙟⠠摅瑩䤠⁤›⤵Ʈ伀㉄㈸㌷㈯㈰ⴵ〲㘲䌺楨灰湩⁧桴⁥潴⁰景删䍃瀠汩獥琠敲畱物摥氠湩⁥湡⁤敬敶祢洠捥慨楮慣⽬慭畮污洠慥獮眠瑩潨瑵਍慤慭楧杮琠敨爠浥楡楮杮瀠牡⁴景琠敨瀠汩⁥湡⁤瑳捯火汩湩⁧瑡搠獥杩慮整⁤潬慣楴湯⁳湡⁤楤灳獯污漠൦搊獩慭瑮敬⁤慭整楲污⁳灵琠⁡敬摡漠⁦‱楫潬敭牴ⱥ猠慴正湩⁧敳癲捩慥汢⁥湡⁤湵敳癲捩慥汢൥洊瑡牥慩敳慰慲整祬椠据畬楤杮挠瑵楴杮爠楥普牯散敭瑮戠牡⹳映潲灡牰癯摥攠瑳浩瑡⁥卅⁔潎‮䤺剒䤯⽁卅⽔㐱㤵㈯㈰弲張弶‶䔨楤⁴摉㨠㔠ഩ⌊䑏㠲㜲⼰〲㔲㈭㈰㨶潃潣畮⁴楐敬ⴠ䐠楲楶杮搠睯桴⁥敷汬洠瑡牵摥挠捯湯瑵瀠汩⁥潴爠煥極敲⁤楬敮⁳湡⁤敬敶獬琠牨畯桧਍慶楲畯⁳瑳慲慴漠⁦潳瑦琠敭楤浵挠慬⁹湩汣摵湩⁧污楨敲挠慨杲獥愠摮氠扡畯⁲潦⁲潣癮祥湩Ⱨ氠晩楴杮ബ猊慴楧杮愠摮愠汬漠桴牥愠灰楬湡散⁳敮散獳牡⁹潦⁲楰敬搠楲楶杮搠睯晡整⁲潰湩楴杮琠敨戠瑯潴湥൤䄊⁳数⁲敬瑴牥丠⹯䤠獮⹰敔档㈭ㄯ㠱㈯㈰ⴰ䥆⁎慤整⁤㤲〭ⴴ〲ㄲ漠⁦桴⁥楆慮据⁥䤨獮数瑣潩൮圊湩ⵧ吠捥湨捩污 敄慰瑲敭瑮‮敄慴汩⁳潦⁲牤癩湩⁧洶‬㔱渠景瀠獯獴瀠牥搠祡映潲灡牰癯摥攠瑳浩瑡⁥卅⁔潎‮䤺剒䤯⽁卅⽔㐱㤵㈯㈰弲張弶‶䔨楤⁴摉㨠㔠Щ
䑏㠲㜲⼱〲㔲㈭㈰㨶牐癯摩湩⁧慃瑳䤠潲潂汬牡獤眠瑩⁨灡牰癯摥搠慲楷杮⁳湡⁤敤楳湧椠据畬楤杮挠獯⁴景愠汬਍慭整楲污ⱳ洠畯摬湩⁧档牡敧⁳‬潣瑳漠⁦楦瑸牵獥愠摮愠汬氠扡畯⁲档牡敧⁳瑥⹣挠浯汰瑥⁥牦浯愠灰潲敶⁤獥楴慭整䔠呓丠⹯㨠剉⽒䅉䔯呓ㄯ㔴⼹〲㈲㕟㙟㙟⠠摅瑩䤠⁤›⤵’㄀⸳㔶ㄮ债楡瑮湩⁧楷桴戠慬正愠瑮⵩挠牯潲楳敶戠瑩浵獡楴⁣慰湩⁴景愠灰潲敶⁤牢湡⁤湡⁤慭畮慦瑣牵⁥潴朠癩⁥湡攠敶桳摡㩥睔牯洠牯⁥潣瑡⁳湯渠睥眠牯牫⸵㌲区潭瑯⁨楦楮桳湩⁧景琠敨攠灸獯摥猠牵慦散漠⁦䍒⁃潷歲眠瑩⁨洶桴捩散敭瑮洠牯慴⁲㨱″ 散敭瑮㨠㌠映湩⁥慳摮⸩ú伀㉄㌸ㄴ㈯㈰ⴵ〲㘲为浡⁥潢牡⁤景猠穩⁥㔷㙸‰浣椠獮慴汬摥椠桴⁥灡潲牰慩整瀠慬散瘠獩扩敬琠桴⁥異汢捩洠摡⁥景਍牢捩慷汬眠瑩⁨牧湡瑩⁥汰煡敵猠潨汵⁤敢椠獮牥整⁤湡⁤湥牧癡湩⁧敬瑴牥⁳瑥⁣潣灭敬整愠⁳数⁲桴൥搊物捥楴湯漠⁦敤慰瑲敭瑮污漠晦捩牥⁳瑡猠瑩ꡥ䑏㠲㐳⼲〲㔲㈭㈰㨶牐癯摩湩⁧湡⁤瑳捡楫杮漠⁦牔瑯楨⁣硉牯⽡桃瑥楨倠慬瑮漠⁦敨杩瑨㈠‰浣琠〳挠

Hot Dipped Galvanized Pipes with GI thickness upto 60micron. Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instruments. Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Color:or similar specifications approved by departmental officers at site, }OD28054/2025-2026:Supply and installation of HOPPER SPRING RIDER Descriptions Product Area : 1m x 0.5m (3.3ft X 1.6ft)Safe Play Area : 2m x 1.5m (6.5ft X 5ft)?Ideal For : 3-6 Years Friends at a time : 1 Technical Specification: Hopper :Hopper is made up of rotational molding process. It has been provided with four bolts. Hopper is bolted to the spring assembly.Spring assembly :It consists of top plate, spring, footrest & square base plate suitably fixed to each other with UBolts. The Spring is made from En47/45 Spring Steel & the two plates are made from MS with GI plating for corrosion resistance Rotational Molded Products : The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability.Foundation Stand :Foundation Stand made of 40NB Galvanized pipe with GI coated plates welded on both ends for fixing the square base on top and foundation angles at bottom.Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness upto 60micron. Pipe Materials or Class: Light Duty ('A' Class) & Medium Duty ('B' Class) Series of pipes only. Wall thickness of pipe varies according to class/Powder coating: It shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50- 70 microns. It is tested for Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Color: Multicolor for optional or customized & according to RAL shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrapOD28055/2025-2026:Supply and installation of PONNY SPRING RIDER Descriptions Product Area : 1m x 0.5m (3.3ft X 1.6ft) Safe Play Area : 2m x 1.5m (6.5ft X 5ft) Ideal For : 3-6 Years ?Friends at a time : 1 Technical Specification: ?Pony :Pony is made up of rotational molding process. It has been provided with four bolts. Pony is bolted to the spring assembly.?Spring assembly :It consists of top plate, spring,footrest & square base plate suitably fixed to each other with U-Bolts. The Spring is made from En47/45 Spring Steel & the two plates are made from MS with GI plating for corrosion resistance. Rotational Molded Products : The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability.Foundation Stand :Foundation Stand made of 40NB Galvanized pipe with GI coated plates welded on both ends for fixing the square base on top and foundation angles at bottom.Pipes: All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness upto 60micron.Pipe Materials or Class: Light Duty ('A' Class) & Medium Duty ('B' Class) Series of pipes only. Wall thickness of pipe varies according to class / series of pipe used.Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments. Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Color: Multicolor for optional or customized & according to RAL shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap $
OD28060/2025-2026:Supply and installation of DELUXE SWING Descriptions" Product Area : 2.8m X 1.9m (9.2ft X 6.2ft)" Safe Area : 3.8m X 2.9m (12.5ft X 9.5ft) " Friends at a time : 3 Adults Technical Specification:" Leg pipe :40NB hot dip galvanized swing leg pipe of length 2950mm with GI thickness of 60." Top pipe :50NB hot dip galvanized swing top pipe of length 1895mm with GI thickness of 60 with an ISF conforming to IS 1730-1961 welded at its both ends to junction box. Pipe can withstand torsional stress created du to swinging motion." Junction box :225mmx103mm junction box made from 3mm thick GI Plated plate to house the two swing leg pipes, top pipe & roof frame." Swing clamp assembly :Swing clamps made up of two parts are joined together with M6 Allen bolts along with S-Hook & a specially designed swing pin. The S-Hook is specially designed to house a bearing for smooth & noiseless swinging. The clamps are made from injection molded Nylon-6 plastic." Chain :Rubber dip molded swing chain of dia 6mm." Hook :S-Hook of dia 8mm of Grad SS 304.
OD28061/2025-2026:Supply and installation of DISC CHALLENGER (PGTH-01) Descriptions" Product Area : 4.5m X 1.1m (14.8ft X 3.6ft)" Safe Play Area : 5.5m X2.1m (18ft X 7ft)" Ideal For : 5-12 Years" Friends at a time : 5-6 Technical Specification:" Vertical support : 80NB Pipe welded together with a flange to form a strong frame withstand both the pitching & yawing moment. The 80NB pipe is hot dip galvanized pipe of height 2950mm with GI thickness upto 60." Top frame : 80NB Pipe welded together with a flange to form a strong frame withstand both the pitching & yawing moment. The 80NB pipe is hot dip galvanized pipe of height 4380mm with GI thickness upto 60. " Clamps : Two 80x20 sized clamps joined together to two 80NB clamps with non rusting nut - bolts made from N

utting reinforcement bars. from approved estimate EST No. :IRR/IA/EST/1459/2022_5_6_6 (Edit Id : 5) ÐOD25455/2025-2026:Providing and fixing 50mm GI pipe embedded in cement concrete for fencing including cost of GI pipe and fixing charge of GI pipe etc complete as directed by the departmental officers at site*
4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)ÑOD25453/2025-2026:Supplying and fixing angle iron, M S Flat etc... to G I post including all cost of welding drilling hole etc... for fixing G. I. chain link as per directions of departmental officers at site.¿OD25454/2025-2026:supplying at site steel galvanized steel bolts and nuts 10mm dia and 125mm long round head with slots etc complete as per the direction of the departmental officers at site.Z
16.70.2:Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge.Made of G.I wire of dia 4 mm. PVC coated to achieve outer dia. not less than 5 mm in required colour and shade
OD27585/2025-2026:Providing Colour coated Asphalt roofing Shingles including sufficient length of ridge pieces as roof covering for boat jetty roof neatly laid and water proofing the roof full as per the direction of departmental officers at site EST No. :IRR/KP/EST/1415/2023_5_1_1úOD27586/2025-2026:Name board of size 75x60 cm installed in the apropriate place visible to the public made of brick wall with granite plaque should be inserted and engraving letters etc complete as per the direction of departmental officers at site¨OD27587/2025-2026:Providing and stacking of Trothic Ixora/Chethi Plant of height 20 cm to 30 cm at site including conveyance as per direction of the officer-in-charge.‘OD27588/2025-2026:Lum sum provision for Enhancing the surface with artistic paintings, such as Artera -style art, to improve its aesthetic appeal¤OD27589/2025-2026:Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work“
OD27590/2025-2026:Providing and fixing approved coloured, branded AC Strip Light with Waterproof (IP65 rating), 6W and 120 LEDS per Meter for prefect ambience, superior life and quality withstanding harsh weather. Applicable for bendable or angled patterns, or in continu

in.The S-Hook is specially designed to house a bearing for smooth & noiseless swinging. The clamps are made from injection molded Nylon-6 plastic. 2) Chain : Rubber dip molded swing1NO 56,521.00 56,521.00 5 chain of dia. 6mm & 1450mm Long. 3) Hook : S-Hook of dia 8mm & 145x130 Triangular hook. 4) Seat : Rubber Seat made by Natural Rubber with sufficient reinforcement. •Powder coating : It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instrument. •Bearing: Bearing is self-lubricated made of SKF/ NTN/ NACHI make shall be provided for smooth & trouble-free movement. •Pins and Circlips: 12mm diameter pins shall be made from EN8 material & Circlip A10. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Color: Multicolor or similar specifications approved by departmental officers at site٤伀㉄〸㘵㈯㈰ⴵ〲㘲区灵汰⁹湡⁤湩瑳污慬楴湯漠⁦䡃卅♔䡓問䑌剅䌠䵏䥂䅎䥔乏䐠獥牣灩楴湯⁳牐摯捵⁴牁慥਍›⸱洸砠ㄠ㘨瑦砠㌠㔮瑦 慓敦瀠慬⁹牁慥㨠㌠㠮⁸洲⠠〱瑦砠㜠瑦䘩湵瑣潩㩮匠牴湥瑧敨獮䌠敨瑳਍畭捳敬ⱳ䘠牯慥浲⁳…牔捩灥⹳吠捥湨捩污匠数楣楦慣楴湯›慍湩䘠慲敭›桔⁥慭湩映慲敭漠⁦桃獥൴倊敲獳搠畯汢⁥獩洠摡⁥牦浯ㄠ〰䉎䜠⁉楐数മ匊慥⁴牦浡㩥匠慥⁴牆浡⁥慭敤映潲㈳䉎䜠⁉楰数‮慍整楲污甠敳⁤潦⁲敳瑡愠敲䰠䑌䕐⠠楌敮牡਍潌⁷敄獮瑩⁹潐祬瑥票敬敮 楷桴唠⁖瑳扡汩穩瑡潩景䘠潯⁤片摡⁥潎慈慺摲畯⁳汐獡楴⹣਍桔捩湫獥⁳景琠敨删呏⁏牰摯捵獴瘠牡敩⁳牦浯㔠洠潴㠠洠獡瀠牥琠敨瀠潲畤瑣‮桔⁥癯牥污൬瀊潲畤瑣漠瑢楡獩愠猠慥汭獥⁳潴攠獮牵⁥数晲捥⁴敬摮漠⁦湵晩牯桴捩湫獥⁳…畤慲楢楬祴‮慈摮敬ഺ䠊湡汤⁥牦浡⁥獩洠摡⁥牦浯㌠串⁂湡⁤㔲䉎䜠⁉楐数‮慍整楲污甠敳⁤潦⁲慨摮牧灩椠⁳偅䵄਍攨桴汹湥⁥牰灯汹湥⁥楤湥⁥潭潮敭⥲删扵敢⹲潆瑯爠獥㩴㌠串⁂䥇洠瑡牥慩楰数椠⁳獵摥映牯਍潦瑯敲瑳‮敂牡湩㩧䈠慥楲杮⁳牡⁥楯敳污摥‬敳晬氭扵楲慣整⁤慭敤漠⁦䭓⽆丠乔 䅎䡃⁉慭敫਍桳污敢瀠潲楶敤⁤潦⁲浳潯桴☠琠潲扵敬昭敲⁥潭敶敭瑮‮瑏敨獲›湉整湲污氠捯潴氠浩瑩琠敨਍潭敶敭瑮倠灩獥›汁敭慴楰数⁳牡⁥潈⁴楄灰摥䜠污慶楮敺⁤楐数⁳楷桴䜠⁉桴捩湫獥⁳景㐠ⴰ਍〶業牣湯倮睯敤⁲潣瑡湩㩧䤠⁴桳污敢搠湯⁥楷桴瀠牵⁥潰祬獥整⁲慲⁷慭整楲污‮牄⁹楦浬਍桔捩湫獥⁳慭湩慴湩摥眠瑩楨桴⁥慲杮⁥景㔠ⴰ〷洠捩潲獮‮瑉椠⁳整瑳摥映牯愠桤獥潩整瑳眠瑩⁨桴൥栊汥⁰景挠潲獳栠瑡档挠瑵整⁲湩瑳畲敭瑮⹳畎⁴湡⁤潂瑬㩳䜠污慶楮敺⽤匠匮⼮汁敬潂瑬䈯瑵潴效摡਍汁敬潂瑬☠丠瑵⁳ 祎潬潌正丠瑵⁳牡⁥獵摥眠瑩⁨噐⁃潂瑬䌠灡⹳䄠汬漠数湥獤漠⁦楰数戠敥൮挊潬敳⁤祢䜠⁉ 噐⁃慣獰映牯甠敳⁲慳敦祴愠慧湩瑳攠瑮慲浰湥⹴䌠汯畯⁲牯猠浩汩牡猠数楣楦慣楴湯൳愊灰潲敶⁤祢搠灥牡浴湥慴景楦散獲愠⁴楳整䑏㠲㔰⼷〲㔲㈭㈰㨶畓灰祬愠摮椠獮慴汬瑡潩景䰠䝅倠䕒卓䐠問䱂⁅呓乁䅄䑒䐠獥牣灩楴湯⁳牐摯捵⁴牁慥㨠਍⸲㔰⁘⸰洵⠠⸶㌷瑆堠ㄠ㘮䘴⥴匠晡⁥汐祡䄠敲⁡›⸳㔰⁘⸱洵⠠〱瑆堠㔠瑆ഩ䘊湵瑣潩㩮圠牯潫瑵漠⁦桴杩⁨湡⁤慣晬⁳瑓敲杮桴湥湩⁧敌獧吠捥湨捩污匠数楣楦慣楴湯›潐瑳䐠慩›〸䉎䜠⁉慭湩瘠牥楴慣畳灰牯⁴楰数漠⁦敌⁧牐獥⁳潄扵敬椠⁳楦數⁤癯牥ㄠ洰桴捩慢敳瀠慬整മㄊ洰桴捩汣浡楰杮瀠慬整⁳牡⁥瑡慴档摥琠慭湩映慲敭琠潨摬琠敨爠獥⁴景愠獳浥汢敩⹳匠慥൴昊慲敭›敓瑡䘠慲敭洠摡⁥牦浯㐠丰⁂敢摮䜠⁉楰数⁳湡⁤慍整楲污甠敳⁤潦⁲敳瑡椠⁳䑈䕐⠠楈桧䐠湥楳祴倠汯敹桴汹湥⥥唠⁖瑳扡汩獩摥䰯䑌䕐‮桔獩猠慥⁴牦浡⁥獩洠畯瑮摥漠敶瑲捩污猠灵潰瑲਍楰数琠牨畯桧猠数楣污祬搠獥杩敮⁤敢牡湩⁧潨獵湩獧‮潆瑯爠獥㩴䘠潯牴獥⁴畳灰牯⁴潴戠⁥景㈠丵⁂⹇⁉楐数‮桔⁥慭整楲污⁳獵摥映牯映潯牴獥⁴獩䄠畬業畮൭挊獡楴杮䰯䑌䕐䠯偄⽅祎潬⹮䈠慥楲杮䠠畯楳杮猠慨汬戠⁥慭敤映潲卍洠瑡牥慩⹬䈠慥楲杮ഺ䈊慥楲杮⁳牡⁥楯敳污摥‬敳晬氭扵楲慣整⁤慭敤漠⁦䭓⽆丠乔 䅎䡃⁉ 䅆⁇慭敫猠慨汬戠൥瀊潲楶敤⁤潦⁲浳潯桴☠琠潲扵敬昭敲⁥潭敶敭瑮‮楐数㩳䄠汬洠瑥污瀠灩獥愠敲䠠瑯䐠灩数൤䜊污慶楮敺⁤楐数⁳楷桴䜠⁉桴捩湫獥⁳景㐠ⴰ〶業牣湯മ倊睯敤⁲潣瑡湩㩧䤠⁴桳污敢搠湯⁥楷桴瀠牵⁥潰祬獥整⁲慲⁷慭整楲污‮牄⁹楦浬吠楨正敮獳਍慭湩慴湩摥眠瑩楨桴⁥慲杮⁥景㔠ⴰ〷洠捩潲獮‮瑉椠⁳整瑳摥映牯愠桤獥潩整瑳眠瑩⁨桴⁥敨灬漠⁦牣獯൳栊瑡档挠瑵整⁲湩瑳畲敭瑮⹳丠瑵愠摮䈠汯獴›慇癬湡穩摥匯匮⼮汁敬潂瑬䈯瑵潴效摡䄠汬湥䈠汯⁴ദ上瑵⁳ 祎潬潌正丠瑵⁳牡⁥獵摥眠瑩⁨噐⁃潂瑬䌠灡⹳䄠汬漠数湥獤漠⁦楰数戠敥汣獯摥戠⁹䥇਍ 噐⁃慣獰映牯甠敳⁲慳敦祴愠慧湩瑳攠瑮慲浰湥⹴਍敃瑲晩捩瑡㩥䤠体〹㄰㈺㄰‵潃潬㩲䴠汵楴潣潬⁲潦⁲灯楴湯污漠⁲畣瑳浯穩摥愠摮愠⁳数⁲䅒⁌桓摡⹥਍慐正条湩㩧匠晡瑥⁹″慬敹⁲慰正条湩⁧楬敫ㄠ瑳䔠䕐䘠慯渲⁤䑈䕐䘠汩湡⁤爳⁤獩匠牴瑥档਍牷灡‮潎整›浉条獥愠敲漠汮⁹潦⁲敲敦敲据獥‮捁畴污倠潲畤瑣漠⁲潣潬牵漠⁦桴⁥牰摯捵⁴慭⁹慶祲漮䑏㠲㔰⼸〲㔲㈭㈰㨶畓灰祬愠摮椠獮慴汬瑡潩景䠠偉吠䥗呓剅䐠問䱂⁅敄捳楲瑰潩獮倠潲畤瑣䄠敲⁡›⸱洲砠〠㤮൭⠊⸳昹⁴⁸昳⥴匠晡⁥汐祡䄠敲⁡›⸲洲砠ㄠ㤮㤨㠮昵⁴⁸⸵昳⥴䤠敤污䘠牯㨠ㄠ″教牡⁳…扡癯൥䘊湵瑣潩㩮瑓敲捴敨⁳慷獩⁴…灕数⁲潂祤‮敔档楮慣灓捥晩捩瑡潩㩮䴠楡畓灰牯㩴吠敨洠楡൮猊灵潰瑲漠⁦楈⁰睴獩整⁲潣獮獩⁴景ㄠ〰䉎䜠䤮倠灩⹥਍慈摮敬›㔲䉎䜠污慶楮敺⁤楰数戠湥⁤潴映牯慨摮敬漠⁦楈⁰睔獩整⁲牰摯捵⹴਍潆瑯敲瑳䈠湥⁤楐数›〴䉎䜠⁉楰数椠⁳瑡慴档摥眠瑩⁨慭湩映慲敭琠潦浲愠映潯⁴敲瑳栠癡湩൧ㄊ〳㕸砰‵桴捩汰瑡⁥瑓湡楤杮漠⁲潒慴楴杮䐠獩⁣›瑓湡楤杮䐠獩⁣景㌠〰浭䐠慩爠畯摮猠穩⁥桳污൬戊⁥慭敤漠⁦䑈䕐䴯瑥污‮㔱浭琠楨正匠敨瑥愠摮倠慬整ㄠ洰桴捩潦⁲慢敳猠灵潰瑲‮敂牡湩㩧䈠慥楲杮⁳牡⁥楯敳污摥‬敳晬氭扵楲慣整⁤慭敤漠⁦䭓⽆丠乔 䅎䡃⁉慭敫猠慨汬戠⁥牰癯摩摥映牯਍浳潯桴☠琠潲扵敬昭敲⁥潭敶敭瑮‮楐数㩳䄠汬洠瑥污瀠灩獥愠敲䠠瑯䐠灩数⁤慇癬湡穩摥倠灩獥眠瑩൨䜊⁉桴捩湫獥⁳景㘠洰捩潲⹮潐摷牥挠慯楴杮›瑉猠慨汬戠⁥潤敮眠瑩⁨異敲瀠汯敹瑳牥爠睡洠瑡牥慩⹬਍牄⁹楦浬吠楨正敮獳洠楡瑮楡敮⁤楷桴湩琠敨爠湡敧漠⁦〵㜭‰業牣湯⹳䤠⁴獩琠獥整⁤潦⁲摡敨楳湯琠獥൴眊瑩⁨桴⁥敨灬漠⁦牣獯⁳慨捴⁨畣瑴牥椠獮牴浵湥獴‮畎⁴湡⁤潂瑬㩳䜠污慶楮敺⽤匠匮⼮汁敬൮䈊汯⽴畂瑴湯䠠慥⁤汁敬潂瑬☠丠瑵⁳ 祎潬潌正丠瑵⁳牡⁥獵摥眠瑩⁨噐⁃潂瑬䌠灡⹳䄠汬漠数൮攊摮⁳景瀠灩⁥敢湥挠潬敳⁤祢䜠⁉ 噐⁃慣獰映牯甠敳⁲慳敦祴愠慧湩瑳攠瑮慲浰湥⹴䌠汯牯漠⁲楳業慬൲猊数楣楦慣楴湯⁳灡牰癯摥戠⁹敤慰瑲敭瑮污漠晦捩牥⁳瑡猠瑩ⱥഭЊ䑏㠲㔰⼹〲㔲㈭㈰㨶畓灰祬愠摮椠獮慴汬瑡潩景䄠剅䅉⁌呓佒䱌剅䐠獥牣灩楴湯⁳牐摯捵⁴牁慥㨠ㄠ⁸⸰洵⠠昵⁴൸㈊㘮瑦 慓敦倠慬⁹牁慥㨠㈠⁸⸱洵⠠⸷昲⁴⁸⸴昹⥴䤠敤污䘠牯㨠ㄠ″教牡⁳…扡癯൥䘊湵瑣潩㩮匿牴湥瑧敨獮䰠来䴠獵汣獥‮潌敷⁲潢祤眠牯潫瑵吠捥湨捩污匠数楣楦慣楴湯›潐瑳䐠慩ഺ吊敨䄠牥慩瑓潲汬牥栠癡湩⁧牅潧潮業⁣敤楳湧眠瑩⁨〱丰⁂䥇洠楡敶瑲捩污猠灵潰瑲瀠灩⁥景਍敁楲污匠牴汯敬⁲獩映硩摥漠敶⁲〱浭琠楨正戠獡⁥汰瑡⹥䌠慬灭湩⁧汰瑡獥愠敲愠瑴捡敨⁤潴洠楡牦浡൥琊潨摬琠敨爠獥⁴景愠獳浥汢敩⹳਍潆瑯敲瑳愠摮䠠湡汤獥›潆瑯敲瑳戠湥⁤湡⁤慈摮敬栠癡湩⁧〴䉎愠摮㈠丵⁂楄⁡慧癬湡穩摥瀠灩൥爊獥数瑣癩汥⁹桔⁥慭整楲污⁳獵摥映牯映潯牴獥⁴獩愠畬業畮⽭䱌偄⽅䑈䕐丯汹湯മ倊灩獥›汁敭慴楰数⁳牡⁥潈⁴楄灰摥䜠污慶楮敺⁤楐数⁳楷桴䜠⁉桴捩湫獥⁳景㘠洰捩潲⹮਍潐摷牥挠慯楴杮›瑉猠慨汬戠⁥潤敮眠瑩⁨異敲瀠汯敹瑳牥爠睡洠瑡牥慩⹬䐠祲映汩桔捩湫獥൳洊楡瑮楡敮⁤楷桴湩琠敨爠湡敧漠⁦〵㜭‰業牣湯⹳䤠⁴獩琠獥整⁤潦⁲摡敨楳湯琠獥⁴楷桴琠敨栠汥⁰景挠潲獳਍慨捴⁨畣瑴牥椠獮牴浵湥獴‮敂牡湩⁧潈獵湩⁧桳污敢洠摡⁥牦浯䴠⁓慭整楲

t site including conveyance as per direction of the officer-in-charge.¿OD28343/2025-2026:Providing and Stacking of GOLDEN BAMBOO -Phyllostachys Aurea, having ht. 90 cm to 1.20 m , well developed, fresh, and healthy as per the direction of the officer in-charge.ÓOD28344/2025-2026:Supplying and Providing Victoria bench (150cm x 60 cm), with FRP streap 3 seater heavy duty garden bench for outdoor powder coated for a smooth finish washable and waterproof ,wooden finish ‘OD28347/2025-2026:Lum sum provision for Enhancing the surface with artistic paintings, such as Artera -style art, to improve its aesthetic appeal¤OD28348/2025-2026:Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work§
OD28349/2025-2026:Finishing the front side of existing compound wall with art design paint as per drawing using Acrylic Smooth exterior paint of required shade, Two or more coat including applying additional coats wherever required applied over and including priming coat of exterior primer , to achieve even shade and colour, cost for scaffolding, charges for artist ,etc complete EST No. :OEO/TRIDA/EST/430/2025_5_1_1 ÇOD28350/2025-2026:Supply, conveyance, installation, testing and commissioning of 30W Integrated Solar LED light fitting with all accessories. Each unit should include 18V,75W panel with Grade A solar cells, 24Ah, 12.8V LiFePO4 type battery, Luminaire housing component to be Aluminium alloy with powder paint, IP65, LED chip shall be Philips/Osram, THD <10%, efficiency greater than 85%,3800-4500 lumens,etc. as required with 5years warranty . Luminaire shall be suitable for mounting at a height of 5-6m, should have 24hrs autonomy, PIR sensor for better efficient lighting. Certifications:MNRE/IEC/BIS/LM80/ROHS/IP65) from approved estimate EST No. :IRR/IA/EST/1459/2022_5_6_6 (Edit Id : 5)6
OD28351/2025-2026:Supply and erection of Decorative tubular stainless steel pole having 5 mtr height, 2.5-2inch outer dia made from min. 2mm thick plate for fixing of solar light, all other incidental and miscellaneous charges complete from approved estimate EST No. :IRR/IA/EST/1459/2022_5_6_6 (Edit Id : 5)