PROVN OF NIGHT PICKET FOR 01 X NCO AND 03 X OR AND AUGMENTATION OF WATER SUPPLY AT OMC CHAMPAWAT UNDER GE PITHORAGARH

Amount

DESCRIPTION OF ITEMS

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5M in depth for foundation, laying of cables etc and getting out in hard/dense soil complete all as specified and directed.

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in harde/dense soil complete all as specified and as directed.

Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25cm (hard/dense soil)

Filling under floor (except material) including spreading, levelling, watering and well ramming in layers n exc. 25cm complete all as specified.

Removing excavated material (Soil) n .exc 50 m and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.

M & L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface complete all as specified and directed. Note : Area of the substructure in contact with backfill to be measured.

M & L for treating top surface of filled earth at the rate of 5 litre per sqm of surface with anti termite chemical emulsion complete all as specified and directed.

M & L for treating the soil under plinth protection at the rate of 5 litre per sqm of surface with anti termite chemical emulsion complete all as specified and directed.

M & L for treating the soil along with external perimeter of building at the rate of 2.25 litre of anti termite chemical emulsion per sqm of the perimeter wall complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

M & L for RCC M-25 (Design Mix) as in foundation, including raft, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and as directed.

M & L for RCC M-25 (Design Mix) as in columns, pillars, piers etc complete all as specified and as directed.

M & L for RCC M-25 (Design Mix) as in beams, cantilever, lintels etc complete all as specified and as directed.

M & L for RCC M-25 (Design Mix) as in slabs supported on walls, beams and columns etc complete all as specified and as directed.

M & L RCC M-25 (Design Mix) as in chajjas complete all as specified and as directed.

M & L for form work to sides and soffits of roof beams, lintels lever shelves incl supports over hang etc rough finished surfaces of concrete flat complete all as specified and as directed.

M & L for form work to soffits of suspended slabs such as roof slab landings and similar works n exc 200mm thick (horizontal or slopping) for rough finished surfaces of concrete flat complete all as specified and as directed.

M&L form work to chullah hoods, chajjas and similar items incl edges rough finished surfaces of concrete flat complete all as specified and as directed.

M & L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed.

M & L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide rough finished surfaces of concrete complete all as specified and as directed.

M & L for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams or similar works vertical or to batter for rough finished surface of concrete complete all as specified and as directed.

M & L for form work to sides of pillars, posts, struts, columns for rough finished surface of concrete complete all as specified and as directed.

M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to complete all as specified and as directed.

Description same as item No 23 above but, 5 mm dia and over and incl 10mm dia in stirrups, spacers and binders

M & L for providing cement concrete 1:2:4 of type B0 using 12.5 mm graded stone aggregate 40mm thick as in damp proof course to horizontal or slapping or vertical incl. necessary form work and applying evenly a coat of blown type bitumen at the rate of 1.50 Kg per sqm and blinding with clean dry sand @ 0.05 cum per sqm complete complete all as specified and as directed.

M & L for precast cement concrete Block Masonary with soilid blocks type C1 1:3:6 20mm graded stone aggregate exc 10cm in width and setting in mortar 1:6 complete all as specified and directed .

M & L for 15mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:4 mixed with water proofing compound as per manufacturer instruction, finished fair and even complete all as specified and directed. (WPC measured separately)

M & L for 15mm thick cement plaster on other than fair faces of brick work or concrete surface on wall in CM 1:6 finished fair and even complete all as specified and directed.

M & L for 5mm thick rendering in CM 1:4 on ceiling, soffits, chajja projection complete all as specified and directed

M & L for 15mm thick screed bed in CM 1:4 mixed with water proofing compound as per manufacturer instruction , finishing the surface should be even and fair with out using extra cement, complete all as specified and directed. (WPC measured separately)

Supply only water proofing compound, complete all as specified and directed.

M & L for hard core of broken stone or boulders gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface of broken bricks aggregate, complete all as specified and as directed.

M & L for 75mm thick PCC 1:4:8 of type D-2 using 40mm graded stone agrregate as in sub base of floors etc complete all as specified and directed.

M & L for PCC 25mm thick 1:2:4 of type B1 using 20mm graded stone aggregate as in floors complete all as specified and as directed.

M & L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate) as in plinth protection laid in alternate panels 75mm thick finished even and smooth w/o using extra cement.

Forming construction joints 30mm deep x10mm wide filled with sealing compound grade "A"

S & F pressed steel frames of size 125x60mm (using PBI sheet 1.25 mm thick) for doors with one or more rebates including necessary fixing lugs, hinges,lock strike plate, etc Including cement concrete 1:3:6 type C-0 (using 12.5mm graded stone aggregate) as for filling in door frames and including cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) for fixing of hold fast complete, as specified and as directed.

S & F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S & F 35mm thick IInd class hard wood glazed skelton shutters open rebated and prepaired to recive glass,guage etc (W/o sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of sutters as specified in SSR part - I section - 8, clause 8.20 (a). S&F to chowkhat.

S & F factory made solid PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of M S tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PCV ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cementsuppling & fixing in the frame at site as per specification & drawings complete all as specified and as directed.

S & F 200mm aluminium anodised barrel tower bolts of extruded section all as specified

S& F 150 mm extruded aluminum alloy handles, fabricated type anodised.

S & F mild steel barrel tower bolt of size 200mm stove enamalled black with bright bolt and fixed complete all as specified and directed.

S & F Mild steel sliding door bolt of size 300mm plate type stove enamelled black with bright not lessthan 12mm dia with and including minimum of 6 bolts and nuts four on plate and two on staples plat and fixed complete all as specified and directed.

S & F mild steel pressed handle oval type stove enamalled black size 150mm complete all as specified and directed.

S & F steel window with side hung shutter including projecting type hinges with steel handle, and steel peg stay, tower bolts complete with glazing bars, dovetailed welded complete all as specified and directed.

S&F steel window with side hung shutter including projecting type hinges with steel handle, and steel peg stay, tower bolts complete without glazing bars, dovetailed welded complete all as specified and directed.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed..

S & F steel ventilators with top hung shutters incl. hinges, steel handle and steel peg stay, tower bolts complete with glazing sash, dovetailed or welded complete all as specified.

S & F 3mm thick sheet glass ordinary quality and glazing with oil putty in square nexc. 0.5 sqm in each pane all as specified.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F 28mm dia fancy type wooden finish MS dropery rod fixed with wooden finale stop, brackets etc to wall complete as sample approved all as specified and directed.

M & L for three coats of white wash on ceiling/Chhajja (undecorated) surfaces incl preparing of surfaces complete all as specified and directed.

M & L three coats of white wash on walls including preparation of new plastered surface and complete all as specified.

M & L for applying two coats of distemper oil emulsion on new plastered surfaces of wall including preparation of new surface and including applying wall care putty to gett smooth surface complete all as specified and directed.

M & L for preparation of new (Previously untreated) plastered surfaces of walls and applying two coats of cement based paint on walls over a coat of alkali resistant primer, complete all as specified and directed.

M & L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer on new wooden surfacescomplete all as specified and directed.

M & L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S & F non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.18 Sqm but n exc 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

Ditto all as per item No 61 but on vertical surfaces over 10 mm thick rendring in CM 1:4

S & F non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.06 Sqm but n exc 0.11 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M & L for galzed ceramic coloured tiles 350x250/450x350/300x450x6 to 7mm thick on walls etc set & jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces over &.incl 10mm thick rendering in cement mortar 1:4 for laying wall tiles etc complete all as specified and directed.

S & F chequered rubber moulded decorative designed, laqured finished, cement concrete tiles 25mm thick size of tiles as approved set, jointed and pointed in neat cement slurry with grey cement and pigments in floor over and including 15mm thick screed bed with cm 1:6 complete all as specified and directed.

Cutting chases in brick wall, stone concrete block or slab walls, pining in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings ,steps,cills sunshades, shelves, lintels, etc and cutting chases for concealed water tubing and making good , cutting n'exc 10 cm girth complete all as specified and directed.

S & F 15mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

S & F 20mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

S & F 20mm bore Gate valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S & F 15mm bore dia Stop/angle valves fancy type Chromium plated screwed down , high pressure, with capston head, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F15mm bore dia Bib taps chromium plated with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed .

S & F Oval type wash basin superior quality 550X400mm size fitted with granite top over pre cast RCC slab incl waste coupling 150mm long & suitable PTMT bottel trap complete all as specified

S & F Brass CP wash basin mixer 15 mm bore dia for mixing hot & cold water screwed down for iron pipe and fixed

S & F Brass CP wall mixer 15 mm bore dia for mixing hot & cold water screwed down for iron pipe and fixed

S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S & F Brass chromium plated shower rose 125mm size incl shower arm complete complete all as specified and directed.

S & F aluminium peg sets of 6 pegs complete all as specified and directed.

S & F 450mm long PVC Connection 15mm size with PTMT nuts complete all as specified and directed.

S & F 600mm long PVC Connection 15mm size with PTMT nuts complete all as specified and directed.

S & F 600x450 mm bevelled edge of slected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washers complete all as specified and directed.

S&F Brass chromium plated Tubular towel rail , 20mm dia, D type , 60cm long between falnges complete all as specified and directed.

S & F vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including lime concrete bedding and connection to trap and flush pipe complete all as specified and directed.

S & F PVC valveless, syphonic action type, flushing cistern, 10 lits capacity low level, white, with inlet, ball valve, float and handle including brackets, flush pipe and connection to pipes complete all as specified and directed.

S & F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe but incl waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; incl urinal spreader, flush pipe, grating (if any) and Union for discharge pipe complete all as specified and directed.

S & F rotational moulded polethylene tripe layred water tank of 1000 ltrs capacity (cylindrical vertical with closed top) noticed and portion all as pacific SSR Part- I complete all as specified and directed.

S & F 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm -210 gms ) complete all as specified and directed.

S & F PVC (SWR) floor trap with CP grating including jointing to waste pipe 75 mm bore outlet with solvent cement all as specified.

S & F PVC (SWR) bends 75 mm bore with or with out oval excess door complete all as specified and as directed

S & F PVC (SWR) bends 110 mm bore with or with out oval excess door complete all as specified and as directed

S & F 110mm bore PVC (SWR) junction single (Single T) equal or unequal

S & F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and directed.

S & F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed laid in trenches or in floors etc complete all as specified and directed.

S & F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc complete including complete all as specified.

S & F 150mm bore Reinforced concrete pipes, class NP3, laid in trenches and jointed with collars in cement and sand mortar 1:1 complete all as specified and directed. (Note :- Excavation & earth work shall be measured separately).

M & L for cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in bed to drain pipes of 150 mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

M&L for water proofing treatment to roofs surfaces including a coat of cold applied bituminous shalitex primer @ 0.30 Lit per sqm evenly on roof surface and a coat of hot blown bitumen 85/25 @ 1.2 kg/sqm shall be applied on primed surface and laying of 3mm thick APP modified polymeric membrane (weight not less than 3.0 Kg/Sqm) unrolled and bonded completely to the substrate with side over lap of 75 mm & end over lap of 100 mm and then scaled/ fused by flame or bitumen and a coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm shall be applied on top of APP modified polymeric membrane as per manufacture instruction and finally it will be finished with a coat of bituminous aluminium paint @ 0.20 Kg/Sqm, complete all as specified and as directed.

M & L for PCC 1:3:6 type C2 (using 40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified.

M & L for providing precast cement concrete bounders type B1 (1:2:4) using 20 mm graded stone aggregate, set in Cement mortar 1:6 complete all as specified and directed

M & L for walling of random rubble, uncoursed well bounded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed

Hand packing (any thickness) at back of walls with broken stone or boulders and raising (or lowering) to the required level complete all as specified and directed.

M & L for providing cement concrete type B1 ( 1:2:4) using 20 mm graded stone aggregate, as in coping , bed blocks including necessary form work complete all as specified and directed

M & L for raised pointing to randam polygonal rubble, uncoursed or brought upto courses in Cement mortar (1:4) complete all as specified and directed.

S&F 75mm bore PVC(SWR) pipes single socketed for weep holes , in any length with rubber ring joints complete all as specified and directed.

S & F mild steel work as in fencing posts/ flat iron as in straps to hold chain link fencing incl. cutting tops to shape as directed , drilling holes, notching for wire etc.,flat iron fillets (for securing wire mesh etc.)incl. all necessary drilling, bolting or riveting etc. and similar work complete all as specified and as directed.

S&F Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts ,including ,securing or tying at crossing with end provision of galvanised mild steel wire staple or steel pins,etc complete all as specified and as directed.

M&L for Preparing surface of wood and wood based materials, steel and iron work, new or old, of any description and girth, ends of posts etc exc 0.1 sqm but n.exc 0.5 sqm each and treated with tar or coal tar black paint complete all as specified and as directed.

M&L for point wiring Concealed type with 1.5 Sqmm, single core (FRLS), PVC insulated with multistranded unsheathed copper conductor cable including rigid non- metallic PVC concealed conduit 20 mm or higher dia, light grade ISI marked complete with all PVC conduit accessories / fittings and sunk switch boxes with 3 mm thick plastic laminated hard glossy surface sheet (white) top cover, including continuous earth wire of PVC insulated, unsheathed, green in colour 1.5 Sqmm multistrand copper conductor (FRLS) connected to all fittings, sunken boxes and common earth and connected to earth dolly , screwed with Brass screws, cup washers complete all as specified and directed for the following :-

(a) One light point/ exhaust fan point point controlled by one, one way switch of 5/6 Amps.

(b) One 3 pin socket outlet 5 Amp on same board with other switch

(c) One 3 pin 5/6 amps socket out-let point on independent board controlled by one, one way switch of 5/6 amps on independent board.

All as per item 106 herein above but with 2.5 Sq mm cable (FRLS) for one 15 Amp socket outlet controlled by one switch on independent board and 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor cable as continuous earth wire complete.

S & F Switch piano, flush type, white finish, 5/6 amps, single pole, one way.

S & F Socket outlet 3 pin, 5/6 amps and 2 pin 5/6 amps flush type, complete all as specified and directed.

S & F Switch piano flush type, white finish, 15/16 amps, single pole, one way, complete all as specified and directed.

S & F Socket outlet two in one 3 pin 5/6 amps and 3 pin 15/16 amps (multipurpose), flush type, non shutters, non inter locking type, complete all as specified and directed.

S & F ceiling rose, surface bakelite, AC, 220/240 volts, 3 terminals, complete all as specified and directed.

Supply and fix LED Integrated Batten T5 box type surface mouted, (1x18 Watt) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.

S & F 1x20 watt LED security light fitting, pressure die-cast aluminium including fixing the same of GI pipe 25 mm dia bore light grade bracket, 1.5 mtr long including necessary cutting / bending /welding and fixed the same with two Nos FI clamps of 40x 4mm duly painted and suitable size of nut & bolts etc. and making electric connection with two core copper flexible wire of 0.50 Sqmm complete all as specified and directed.

Supply and Fix MCB DB sheet metal enclosure for DB, SPN, 4 way having protection with 200 amps rated bus bar, 440 volts, double door, including grauting suitable for housing MCB's and isolators, complete all as specified and directed.

Supply and Fix MCB single pole, 240 volts, 6-32 Amps of 10 KA complete all as specified and directed.

Supply and Fix MCB single pole & Neutral 240 volts, 6-32 amps, of 10 KA complete all as specified and directed.

Supply and laying of XLPE LT 1100 volts underground earthed cable, PVC bedded, galvanized steel strip or wire armoured, electric power cable heavy duty 1100 V with multi stranded, aluminum conductor of cross sectional area 2 core x 10 Sqmm including laying, testing and commissioning complete all as specified and directed.

M & L for sand cushioning with dry and clean sand over and under the under ground cable in trenches , ducts for cable protection incliding levellling and consodilation complete all as specified and directed by EIC.

M & L for laying well burnt bricks,as in protection of cable laid dry, flat aboutting each other wide wise all as directed by Engineer-in-Charge.

M & L for GI tubing 40 mm dia light grade for cable protection all as specified and directed.

Excavation over areas not exc. 1.50 m deep and getting out in hard / dense soil complete all as specified and directed.

M & L for RCC M-30 (Design Mix) with 20 mm graded aggregate as in foundation, including raft, footings, foundation beams, plinth beams, bases for columns etc in water retaining structures complete all as specified and as directed.

M & L for RCC M-30 (Design Mix) with 20 mm graded aggregate as in columns, pillars, piers etc in water retaining structures complete all as specified and as directed.

M & L for RCC M-30 (Design Mix) with 20 mm graded aggregate as in beams, cantilever, lintels etc in water retaining structures complete all as specified and as directed.

M & L for RCC M-30 (Design Mix) with 20 mm graded aggregate as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses in water retaining structures

M & L for RCC M-30 (Design Mix) with 20 mm graded aggregate as in domes, vaults, shell roofs and the like

Use and waste of Formwork to sides and soffits of domes, vaults, shell roofs and arch ribs etc curved in two planes, rough finished surface of concrete complete all as specified and as directed.

M & L for 20mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:3, mixed with liquid water proofing compound as per manufacture's instruction and neeru finishing the plastered surface and applying three coats of sodium silicate painting complete all as specified and directed. (WPC measured separately)

M & L for 5 mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:3 mixed with liquid water proofing compound as per manufacturer instruction, and finishing the surface even and smooth (w/o using extra cement) complete all as specified and directed. (WPC measured separately)

Supply only liquid water proofing compound, complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

S & F PVC water bars 150 mm wide rubbed type of approved quality

S & F Tubes, 50 mm bore 'medium grade' galvanised,with all fittings and welding if required and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F Tubes, 25 mm bore 'medium grade' galvanised,with all fittings and welding if required and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F machine pressed rubber moulded coloured precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 Grade over and including 40mm thick sand cushion all as specified and directed.

M & L for 75 mm thick cement concrete type C2, 1:3:6 (40mm graded aggregate) as in sub base of floors complete all as specified and directed.

S&F Mild steel plain black sheets 1.00mm thick as in hearths; covering to door shutters; covering to door chowkats (frames); etc. cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and as directed.

M & L for Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high

Supply, Installation, Commissioning & testing submersible pump set Electric driven of capacity 15 HP, 24 stage, 3phase, 415Volts,50Hz AC supply suitable for discharge of not less than 180 litre per minute (LPM) at 144m head having 50 mm delivery size directly coupled including making connection with PVC insulated, PVC sheathed, submersible cable 6sqmm 3 core copper conducted flat 1100 Volt grade of adequate length with necessary fixing arrangement and foundation etc. complete all as specified & directed. Note :- (i) The cost of lowering of pump and motor is deemed to be included. (ii) Copper cable shall be measured and paid seprately.

Supply and fix CI NRV Valve, PN 1.6 reflux, with by-pass Arrangement, 50mm bore

S & F PVC insulated copper conductor multistand submersible flat cable 6.0 sqmm cross sectional area, 3 core including jointing and testing complete all as specified.

Supply and Fix 50mm bore Gun metal gate valve screwed both end with iron head wheel complete all as specified and directed

M & L For cutting of existing pipe and making threading and sutable work work for connection for pipe all as specified and directed by Engr-in-charge

Supply, instalation and testing for feeder piller box fixed on foundation outdoor type double door, varmin and weather proof of over all dimension 900x900x450mm suitable for 415 volts 3 phase 4 wire system 50 Hz supply having copper bus bar 100 amps made out of 3.15 mm thick CRCA sheet sheet duly supported on 40 x 40 x 6 mm above ground level ans canopy type roof 15 cm extended in all side and two part hinged door in front sides with locking arrangement and gasket arrangement with one Nos pad lock of 7 lever and three Nos keys and back side fixed with nuts & guskets and two coat powder coated paint with accomodate of followings :- (i) MCCB 4 pole, 63 Amps, 16 KA -1 No (ii) Multi function Eletric meter to measure current voltage PF and KWH (iii) Phase indicating lamp LED type (RYB) 03 Nos (iv) Tinned copper bus bar 03 nos of 100 Amp capacity and 01 No neutral duly tapped in colur coded FRP sleeves and pannel wiring with 2.5 Sqmm multistranded copper conductor cable. (vi) Star Delta starter complete fitted with contactor,relay etc suitable for 15 HP, 3 phase sumbersibale pump set. Note :- PCC for foundation work for fixing of panel shall be deemed to be inclusive in the quoted unit rates.

M & L for earthing complete with galvanised or steel earth plate electrode of size 600x600x6mm thick burried directly in ground vertically (to a depth not less than 2.25mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to strip 32x6mm size with nuts, bolts, check nuts, washers, earth plate surrounded by packed layers of charcoal dust and common salt 15cm thick all around, top & bottom watering pipe 40mm bore of GI light grade with funnel and wiremesh all as shown in electrical plate No. 3 of SSR-2009 Part I and connecting to earthing test point, main switch board and testing on completion including PCC chamber concrete 1:3:6 type C-2 and RCC cover 75mm thick with MS TMT bar 8mm dia @ 150mm c/c both ways in cement concrete(1:2:4) type B-1 including dismantling of old earthing complete all as specified and dirtected by Engineer-in-charge.

Supply and laying of XLPE insulated , armoured heavy duty electric cable with alumnium conductor ,1100 volts grade ,corss sectional area 10 sqmm 4 core complete all as specified and directed by Engr-in-Charge.

bahadur singh samant

SK Traders Sons