ICDS Grant

NAME OF WORK :-Renovation Of Anganwadi At Vadali.(6 Nos)

No Description Quantity Rate Per Amount

Dismentaling tiled of stone floors laid in mortar

including stacking of serviceable materilas and disposal

of unserviceable materials with all lead and lift. 282.96 49.18 Sqm

2 Dismentling doors, windows, ventilators etc. (wood or

steel) shutters including chowkhats architraves,

holdfasts and other attachment etc. complete and

stacking them within all lead and lift.(i) Not exceeding

Sq.M. in area. 21.00 191.85 Each

3 Removing and scraping of old deteriorated plaster of

any thickness fromm wall / R.C.C member including

stacking of serviceable material and disposal of

unserviceable from site of work with all lead and lift 1366.44 19.92 Sqm

P & L 24" x 24" vitrified 8 mm thick tile flooring over

mm (average) base of cement mortar 1:6 ( 1 cement:

coarse sand) on new surface or fixing on existing

flooring by adhesive material including dismentaling of

existing flooring and jointed with color cement slurry

including finised with flush pointing & cleaning the

surface etc. complete for light shade 299.44 1311.18 Sqm

5 Providing and fixing 35 mm thick shutters for Doors,

windows and clerestory windows including Indian teak

wood frames 10 cm x 7 cm. size including anodized

alluminium fixtures and fastenings including primer

coat of approved quality and two coats of oil painting

etc, complete. (ii) Fully Panelled. 23.10 5338.30 Sqm

Providing and fixing window having extruded aluminum

Colour anodized section frame main outer size 63.50 x

38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two

track member size 61.85 mm x 31.75 mm x 1.20mm @

wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x

31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding

shutters of horizontal member size 40mm x 18mm x

1.29mm @ wt.of 0.456Kg/mt, vertical member of size

0.457 Kg/mt with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings

and fixtures and transparent silicon sealant glass fixing

to frame as per details etc complete for window. 10.80 1713.70 Sqm

Providing and laying broken chine mosaic flooring for

terrace using 12 mm to 20 mm broken pieces of glazed

tiles to be laid over cement mortar 1:3 to plain or slope

and to be tempered to bring mortar creme out upto

surface using white cement including rounding off

junctions and extending them upto 15 cm along the

wall,clearing with water and oxalic acid etc. as directed. 282.96 779.70 Sqm

8 Providing 15mm thick cement plaster in single coat on

Rough (Similar)side of single or half brick walls for

interior plastering upto floor two level and finished

even and smooth in (i) Cement mortar 1:3 (1-cement:3-

sand) 900.46 184.78 Sqm

9 20mm thick sand faced cement plaster on walls upto

height 10 metres above ground level consisting of

12mm thick backing coat of C.M. 1:3 (1-cement : 3-

sand) and 8mm thick finishing coat of C.M. 1:1 (1-

cement : 1-sand) etc. complete. 465.98 321.10 Sqm

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly

brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth. 900.46 82.97 Sqm

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly

brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth. 465.98 65.25 Sqm

12 Providing and fixing 18 mm thick gang saw cut, mirror

polished, premoulded and prepolished, machine cut for

flooring & platform required size, approved shade,

colour and texture laid over 20 mm thick base cement

mortar 1:4 (1 cement : 4 coarse sand), joints treated

with white cement, mixed with matching pigment,

epoxy touch ups, including rubbing, curing, moulding

and polishing to edges to give high gloss finish etc.

complete at all levels. 3.60 2692.16 Sqm

1 Point wiring for Light / Bell with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires up

to 10 mtr length , in below type of pipe erected with

6A Modular type switch / bell p

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. III 18.00 582.77 PT.

2 Point wiring for FAN with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade

FRLS PVC insulated multi strand copper wires up to

mtr length, in below type of pipe erected with 6A

Modular type switch and hum free EME

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. III 12.00 810.02 PT.

3 Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to

mtr length, in below type of pipe erected complete

with Modular type switch & 5 pin Plug e

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu.

Wire from nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. III 24.00 612.06 PT.

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm

Cu. Wire from mcb db board.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. III 6.00 894.86 PT.

4 Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured /

metallic/white front plate , modules erected with

necessary connections as per site situation directed by

6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular

MCB Switch 36.00 410.06 Ea.

5 Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB , with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark

/name 160V to 270V, Power Factor more than 0.95,

THD < 15%, CCT 3000 K to 6500K, Luminaire efficacy>

85 lumens /watt ,LED LED driver efficiency > 85 %

(fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings. The Engineer incharge may

select any wattage capacity between the ranges

(A) Tube Light with integral driver

(iii) 18-20 Watts, Surge - 2kV,IP-20, conventional 4 feet

Cat-lll 18.00 295.93 Ea.

6 Providing & erecting Approved make Ceiling Fan with

double ball bearing ISI mark with Condenser 230 volt

A.C.50 Hz 1200 mm sweep complete having 3 blades

aluminium body and blade sets having ornamental

design shanks , canopy erected with earthing. [ Ma 12.00 2311.89 Ea.

7 Providing & erecting 415 V MCB Four Pole for Motor &

Inductive Load (C Curve) having 10KA breaking capacity

& confirms to IS :8828 in existing box having following

(b) 40 Amp. Cat.III 6.00 735.28 Ea.

8 Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to

IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs s

(A) single phase incoming and horizontal single phase

outgoing (ii)6 way 6.00 582.77 Ea.

9 Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having

Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by highly

conductive compound with high charge dissipation

suitable for following type of applications with chamber

and heavy duty cover. (A)(approved make OEM has to

submit test certificate including value of earth

resistance of installation duly stamped and signed by

agency and officer Incharge has to ensure the value of

earthing resistane mentioned in test Certificate) &

having back filling compound of (B) Inner chemical

(CCM Compound)- Resistivity:- 0.2 ohm / meter testing

as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report

must be submitted by Agency.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg. 1.00 4591.46 Nos.

10 Providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and

suitable for operation on 3 phase and neutral

415V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not incorporate

any electronic component for following Max. rating

erected as directed. (ii) 63Amps. FP Cat.III

11 Providing and erecting Meter cover made from multi

chamber hollow PVC sections of 20 mm thick having all

the corner joints with PVC solution angles without using

any screws, nails shutters having required size of eye

glass and with necessary locking arran 6.00 3339.06 Sq.Mtr

12 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Copper conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench

/ pipe at road crossing or floor of following size of

(a) 3 core 2.5Sq. Mm 200.00 268.66 Rmt.

(e) 3 core 16 Sq. mm 150.00 909.00 Rmt.

NOTE :-The rates quoted shall be exclusive of GST , but Inclusive of all taxes, duties which shall not be paid

extra. While GST will be paid for admissible part of actual work done at the approved tender rates. GST

Shall be paid as per prevailing rates at the time of payment.