Repairing Work in Dr.S & S.S Gandhi Government Engineering Collage at Majuragate Surat (Providing Barrier Free Building for Diseable signagese, Composite Tank, ,Paverblock, and Other Miss. Work)

Name of work :-

Repairing Work in Dr.S & S.S Gandhi Government Engineering Collage at Majuragate Surat (Providing

Barrier Free Building for Diseable signagese, Composite Tank, ,Paverblock, and Other Miss. Work)

Bill of Quantities

(A) Percentage Rate Tender (Up to INR 50 Cr. )

m Item of work Quantity Unit Amount

1 Providing and supplying wheel chair for handicap including Ultra light 11.00 Nos 6060.00

weight aluminum alloy frame wheelchair, Detachable armrest,

Elevating footrest,Detachable & height-djustable headrest,Duracle

2 Providing and fixing Tectile PVC Strip size of 600 x 300mm of self 1650.00 Nos 454.50

adhesive quality & fixtures & fastenings etc directed by engineer in

3 Dismentaling tiled of stone floors laid in mortar including stacking of 1160.10 Sqmt 50.11

serviceable materilas and disposal of unserviceable materials with all

4 Demolition and disposal of unserviceable materials with all lead and 278.90 Cumt 639.72

lift.(i) cement concrete.

5 Providing and laying water proofing treatment by conventional method 2788.80 Sqmt 920.11

including cleaning the slab surface by wire brush as directed including

provding first layer of C.M. 1:4 of 40 mm thickness mixed with water

proofing compound at rate prescribed by manufacturer, including

putting of brick bats of average thickness 40 mm Well immerssed in

water laid uniformly on first layer of mortar including applying cement

slurry @ rate of 0.08 bag/sqm. on fixed layer of brick bats including

maintaining necessary slope, in second layer 40 mm thick C.M 1:4

mixed with water proofing compound as directed, including finishing

smooth with cement slurry as directed complete.

6 Providing and laying water proofing treatment with broken china 2669.60 Sqmt 779.70

mosaic flooring for terrace using 12mm to 20mm of broken piece of

ceramic glazed tiles (or more colour directed ) to be laied over cement

mortar bedding of cm 1 : 3 (1 cement 3 sand ) to blain or slope and to

be tempered to bring mortar ceramic up to surface with using white

cement and colour pigment including rounding of junction extending

them up to 15cm along the wall and caring with bends any patten or

design on per drawing and clennig by using oxalic acid etc. Completed

7 Dismantling santtary fittings like wash basin, W.C.Pan Indian and 46.00 No 425.93

European type, flushing tank etc. including stacking the materials with

all lead and lift.

8 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with 890.00 Rmt 78.51

fittings and clamps including stacking the materials with all lead and lift

( for any dia, of pipe)

9 P & L 30x30 cm. Matt Finished Ceramic Tiles 6 mm thick in flooring 120.00 Sqmt 960.42

treads of steps and landing laid on a bed of 12 mm thick cement

mortar 1:3(1-cement:3-coarse sand)finishing with flush pointing in

colour cement slurry etc. complete. Colour and Shade approved by

Engineer-In-Charge

10 Providing and laying coloured glazed tiles of the size 300 mm x 200 mm 465.00 Sqmt 1513.28

x 8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo

on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) &

jointed with white cement slurry.

11 Providing erecting and fixing double coated Syntex PVC. (ISI) water tank 10000.00 Lit 3.95

of required capacity each with all necessary fittings and connection etc.

complete on terrace.

12 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. 105.00 Rmt. 72.65

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

13 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. 105.00 Rmt. 91.84

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

14 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. 105.00 Rmt. 148.12

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

15 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. 355.00 Rmt. 195.67

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

16 Providing, laying and jointing in true line and level 160 diametre U.P.V.C 10.00 Rmt. 834.38

(Type B) conforming to IS 13592-1992 with one end plain and other

end socketed with rubber ring, & fittings conforming to ISI 14735-1999

of approved make for drainage system pipe line, pipe shall be jointed

with each other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 160 mm diametre x 210 mm length x 196 mm

heigh at every 2000 mm center to center or shall be concealed in walls

as directed including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

17 Providing laying (to level or slopes) and jointing reinforced concrete 15.00 Rmt. 678.02

Light duty non-pressure pipes I.S. class NP2 of the following internal

diameter with collars and butt ends prepared for collar joints including

testing of joints complete.(D) 300mm

18 Providing, laying and jointing in true line and level 75 mm dia. UPVC 105.00 Rmt. 740.33

SWRType B pipe conforming to IS 13592-1992 with one end plain and

other end socketed with rubbering and fitting conforming to ISI 14735-

1999 of approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp at every 2000 mm c/c or shall be conceled in

walss as directed including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

19 Providing, laying and jointing in true line and level 110 diametre U.P.V.C 105.00 Rmt. 878.57

(Type B) conforming to IS 13592-1992 with one end plain and other

end socketed with rubber ring, & fittings conforming to ISI 14735-1999

of approved make for drainage system pipe line, pipe shall be jointed

with each other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm

heigh at every 2000 mm center to center or shall be concealed in walls

as directed including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

20 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm 43.00 Nos 599.64

diameter with jali of the following nominal diameter of self cleansing

design with C.I scread down or hinged grating including the cost of

cutting and making good the walls.

21 Providing and fixing screw down bib taps of following size.(B) Brass 37.00 Nos. 186.83

chromium plated screws down Bib Tap. (i) 15mm dia.

22 Providing and fixing brass screw down stop tap.(A) 15mm dia. 29.00 Nos 205.83

23 Providing and fixing pillar tap, capstan head, screw down high pressure 21.00 Nos 308.73

with screws, shanks and back nuts. (i) 15mm dia.

24 Providing and fixing wsh down water closet (European type, W.C. Pan) 25.00 Nos 1356.81

with integral P or S trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be

measured and paid for separately (A) vitreous China Pattern :(i) in

25 Providing and fixing 12.5 Litres low level flushing cistern with a pair, of 25.00 Nos 2370.39

C.I. or Mild brackets, complete with fittings such as lead valve less

syphon, 15mm nom.nal size brass ball valve with polythene float, C.P

brass handle unions and couplings for connections, with inlet, outlet

and overflow pipes, 40mm dia. porcelain enamelled flush bend

including cutting holes in walls and making good the same connecting

the flush bend with cistern and closet (overflow pipe to be measured

and paid for separately)(A) Vitreous China (I) In white colour

26 Providing and fixing plastic seat and cover for wash down water closer 25.00 Nos 291.33

with C.P. brass hinges and rubber buffers. (B) Plastic seal and cover.

27 Providing and fixing chromium plated brass half trun flush cock of 25.00 Nos 263.77

approved quality including fixing in pipe line etc. complete.(ii) 25mm

28 Providing and fixing Jet spray heavy duty with S.S. Braided hose 60 cm 25.00 Nos 355.52

long with wall hook and other accessories etc. completed

29 Providing and fixing G.I. inlet connection for flush pipe with W.C. Pan 25.00 Nos 46.44

30 Providing and fixing wash basin with single hole for pillar tap with C.I. 21.00 Nos 2487.29

Or M.S. brackers painted white including cutting holes and making

good the same including Pillar Tap, Brass Waste, Stop cock, Bottle Trap

and M I fisher union fittings : (ii) Flat back wash basin 550mm x 400mm

size including all necessary fittings etc complete shade and pattern as

approved by Engineer in charge.

31 Removing dry or oil bound distemper by a washing and scraping and 398.00 Sqmt 11.87

sand papering the wall surface smooth including necessary repairs to

scratches complete.

32 Removing dry or oil bound distemper by a washing and scraping and 150.00 Sqmt 13.54

sand papering the celing and sloping surface smooth including

necessary repairs to scratches complete.

33 Applying two coats of (white cement based) or (acrylic lappy (putty)) 548.00 Sqmt 40.59

and two coats of primer (primary coat of Alkaly resistance primer) of

approved brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth.

34 Wall painting (two coats) with plastic emulsion paint of approved brand 398.00 Sqmt 83.36

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings

and other foreign matter and sand papered smooth.

35 Wall painting (two coats) with plastic emulsion paint of approved brand 150.00 Sqmt 89.04

and manufacture on undecorated ceiling surface to give an even shade

including throughly brushing the surface free from mortar droppings

and other foreign matter and sand papered smooth.

36 Painting Two coats (excluding priming coat) on previously painted steel 26.00 Sqmt 90.37

and other metal surface with enamel paint, brushing to give an even

shade including cleaning the surface of all dirt, dust and other foreign

37 Removing, Repairing and Refixing Old existing All Size Wooden door 5.00 Nos 2260.38

shutter including repairing the shutter/frame using Randha machine

and replacing old fixture and fastening with new SS 304 grade fixtures

like 3 Hinges, 1 Stoppers, 2 Aldrop, 2 Handle & 1 lock etc. and as

directed by engineer in charge etc comp.

38 Removing, Repairing and Refixing existing All Size Alluminium window 7.00 Nos 580.75

frame with glass of all size shutter/frame, replacing all old fixtures with

new locks, screws etc. including repairing the shutter/frame with Rates

includes all labour charges for removing, repairing & refixing the

window, all materials, transport cost, taxes etc.and as directed by

engineer in charge etc complete.

39 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand 852.30 Cumt 3741.69

: 4- graded stone aggregates 20 mm nominal size) and curing complete

excluding cost of formwork in (A) Foundation and Plinth

40 Providing and Fixing 15 mm thick 300 mm x 300 mm Tactile Warning 99.00 Sqmt 1228.16

Tiles (Attention Tiles i.e. Tactile Warning Surface Indicator {TWSI}) of

Johnsan Endura Tac Button Yellow Plus or equvqlent make in flooring

laid on 20 mm thick cement mortar 1:6 (1 cement : 6 coarse sand) on

new surface and jointed with cement slurry including finished with

flush pointing & cleaning the surface for all floors as per detailed

drawing etc. complete as directed by Architect or Engineer in charge.

Thse tiles shall be Anti Skid, Chemical Resistant, Fade Proof, Frost - Heat

& Weather Proof, High Flexural Strength, Highly Durable, Stain

Resistance . All Tactile Warning Tiles meet the specific size and

dimension standards as required by ISO/FDIS

41 Providing and Fixing a set of wall mounted 38 mm dia U shaped 22.00 Set 2555.30

horizontal stainless steel collapsible grab bar , 38mm vertical stainless

steel fixed grab rail of grade SS 304 from round pipe supported and

mm dia 8 mm thick SS 304 base flange on wall including anchor

fasteners, nuts, accessories as per detailed drawing etc. complete as

directed by Architect or Engineer in charge.

42 Providing and fixing 90 cm & 120 cm high Stainless steel railing made 198.00 Sqmt 4328.86

from anticorrocive 304 grade S S pipe of 50 mm dia (16Gauge) as hand

rail with S S 304 grade Baluster of 38 mm dia (16Gauge) as a vertical

support fixed in RCC slab at 0.30m c/c including Four horizontal S S

pipes of 16 mm dia (16Gauge) at eqal distance fixed including The

Provisions in Nation Building Code 2016, part,Annex:B-6.2 with baluster

,accesies as per detailed drawing as directed etc. complete.

43 Providing and laying hot applied thermoplastic compound 2.5 mm thick 412.50 Sqmt 367.72

including reflectorising glass beads at 250 grams / Sq.mt. area.

Thickness of 2.5 mm is exclusive of surface applied. Glass beads as per

I.R.C. 35. The finished surface to be level uniform and free from streaks

44 Providing and fixing of Ridge flashing for roof panel shall be made out 165.00 Sqmt 867.39

of 0.5 mm thick pre coated GI sheet . The Precoated sheet shall be of

minimum 240 mpa steel grade confirming to IS 14246:1995 and shall

have zinc coating of minimum 120 gsm as per IS:277:1992 , 5-7 microns

epoxy primer on both side of the sheet and polyester top coat 15-18

micron. The PPGI Sheet shall have plastic protective guard film of

minimum 25 microns to avoid scratches during transportation. The

ridge shall be fixed to the steel members by pop rivet or self drilling/self

stitching fastners @ maximum 450 mm c/c along length of

capping/flashing etc complete.

45 Steel work, welded in built up sections framed work including cutting, 4125.00 Kg 91.08

hoisting, fixing in position and applying a priming coat of read lead

paint & two coat oil paint. (A)In beams and joists, channels angles Tees,

flats, with connecting plates or angle cleats as in main and cross beams.

Hip and jack rafters, purlins conneted to common rafters and the like..

46 Providing and fixing acrylic multilingual Braille (raised dots) 55.00 Nos 1765.48

DIRECTIONAL SIGNBOARDS of size 225 x 150mm designed as per

accessibility standards and having 3.5mm thick acrylic base plate with

Upper Case San Serif words made of white acrylic non glare cut out

letters of height 15mm raised not less than 0.8mm above base plate

and the equivalent word written in Hindi with Devanagari non glare

acrylic letters of height 15mm raised not less than 0.8mm above base

plate and having a non-glare acrylic cut arrow pointing in the required

direction. Each signboard to be fixed as per manufacturers

specifications on the wall at the approved location and at a height of

1200mm from FFL complete as per design / specifications and

guidelines as per the entire satisfaction of the Engineer-in-charge

47 P& F BRAILE INDICATOR OF SIZE 170 MM X 35MM FOR HANDRAILS OF 55.00 Rmt 946.37

THE APPROVED DESIGN AND MAKE HAVE BRAILE DOTS RAISED 0.5 MM

ABOVE BASE PLATE TO BE INSTALLED AT SPECIFIC LOCATIONS AS PER

DIRECTION OF ENGINEER IN CHARGE

48 Providing and fixing of conspectus tape 50mm width on of treads in 115.50 Rmt 162.61

staircase including cutting pasting etc. As per harmonised guidelines

complete in all respect to the entire satisfaction of engineer in charge.

49 Providing and Fixing Size: L 75mm x W 75mm x H 1200 ; 15 mm thick U 55.00 Nos 685.79

shape corner Rubber Reflective Guards with yellow reflective Patti

fixing on RCC/brick surface Including all fitting and material charges &

it shall be Chemical Resistant, Fade Proof, Frost - Heat & Weather

Proof, High Flexural Strength, Highly Durable, Stain Resistance as per

detailed drawing etc. complete as directed by Architect or Engineer in

50 Providing and fixing high intensity grade Informatory (Handicap)Sign 55.00 Nos 3990.64

board made out of 2 mm alluminium sheet size 80 x 60 cms. Rectangle

as per the design of IRC-67-1977 pre treated with Phosphering process

and acid etching , coated with one coat of epoxy primer and two coats

of best quality epoxy paint, reflectorised with retro reflective sheeting

as per latest M.O.S.T.specifications: Letters and numerals should be as

per IRC-30-1968-, 3.10 m long (2 Nos) stand post and frame fabricated

from suitable size iron angle of 35 X 35 X 3 mm , 75 x 75 x 6 mm

painted with best quality epoxy coating in black and white bends . The

details of symbol or incription / numerals for each boards shall be as

per the instruction of engineer in charge . The fixing at site shall be in

1:2:4 C.C. block of size 45 x 45 x 60 cms. for each leg including

excavation , curing etc. complete under the supervision of engineer-in-

charge. (High intensity grade)

51 Providing and fixing in position 300 mm high, 150 mm wide 550.00 Nos 707.00

English/Gujrati letters made from 1.0 mm thick stainless steel sheet as

directed by Engineer in charge with all necessary tools & plants etc.

52 Providing and fixing M S angle openable Double Shutter grilled Door 720.00 Kg 104.03

having 65 MM. x 65 MM x 6 MM size M.S. angled welded togather to

make a box frame and 20mm dia M.S. bars to be fixed with it by

drilling hole in the angle section and welded at 10 cm C/C approx

including anodized iron fixtures & fastenings including primer coat of

approved quality and two coats of oil paint etc., complet as per detail

drawing as directed.

53 Demolition of Brick work and stone masonry including stacking of 93.80 Cumt 577.92

serviceable materilas and disposal of unserviceable materials with all

lead and lift.(ii) In Cement Mortar.

54 Providing and fixing pre-cast concrete kerb stone of gray cement based 1500.00 Rmt 374.92

concrete block 30cm length,30cm height and 15cm thick of M250 grade

concret as per approved design and including excavation for fixing in

proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand)

55 Providing &laying ave. 200 mm thick M-250 grade of controlled 15.00 Cumt 5881.23

cement concrete including dressing sub base providing and laying

micron thick LDPE memberance over prepared sub base providing and

mixing recron 3s fiber at 875 gm/cmt. of concrete placing the concrete

and leveling with surface vibrator finishing the surface with power

floater and trowel light brooming on the surface as directed including

Providing and filling exparsion joint having size 20 mm x 115 mm &

filling the expansion joint having size 20 mm x 20mm by using cloper -

200 as per manufacturer's specification and making construction joint

having size 10 mm x 10mm by using concrete cutter machine etc.

56 Providing and laying controlled cement concrete M-200 and curing 5.40 Cumt 6732.66

complete including the cost of formwork with Ply & Cuplock but

excluding the cost of reinforcement for reinforced concrete work in (C)

Pricast Slab For Ground floor

57 Providing and fixing Speed Breaker Ladwa Size 6 m x 50 mm Heavy Duty 22.00 Nos 9999.00

Road Hump Speed Breaker for Safety & High Visibilty Plastic Yellow &

Black, LSI -RH50MM2PC etc directed by engineer in charge.

58 Clearing and grubbing road land including uprooting rank vegetation 0.40 Hect 28455.09

grass bushes, shrubs, sapling and trees girth up to 300 mm removal of

stumps of trees cut earlier and disposal of unserviceable materials (C)

By mechanical means in area of light jungle

59 Earthwork for embankment including breaking clods, dressing with all 1000.00 Cumt 169.28

lead and lift (excluding watering and consolidation)(E) From Borrow

area within 3.0 Km. lead

60 Providing and fixing pre-cast Rubber Dye inter locking concrete block 8050.00 Sqmt 706.93

60mm thick with grade of concrete M300 pnumatic

compressed/Vibrated mechanically and as per approved design

confieming to IS 15658: 2006 including 35 mm Sand layer for levelling

and filling the joint with sand in proper line and level as per guidelines

of IRC : SP 63-2018 etc complete.

61 Providing and fixing MS Ladder of required pattern with MS 300.00 Kg 114.13

flats(30x3mm) or round or square bars (12mm) at required spacing &

with round headed bolts and nuts or screws or welding including

primer coat of approved quality and two coats of oil paintas as

directed by engineer in charge

62 Providing and laying machine cut and machine polished 60 x 60 127.00 Sqmt 1130.79

cms.bule Kota stone 25mm thick in risers of steps,skirting Dedo and

pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse

sand) and jointed with gray cement slury mixed with pigment to match

the shade of slab including rubbing and polishing etc. complete.

63 Providing and fixing Mirrar polished 18 mm thick Green Marble stone 100.00 Sqmt 1387.74

in Single piece with full round edge and polished of approved quality in

clading on Cill & Jambs and around the doors/ windows/ ventilation

with 12 mm thick cement motor CM (1:4) and fixing with cement slurry

& adhesive including moulding of exposed edges as directed by

engineering in charge etc. complete.

64 Providing and fixing polished 18 mm thick Granite stone in Single piece 100.00 Sqmt 2205.84

with all Exposed Edges Polished and Chamfered and Projcted 6mm

from finished wall thickness of approved quality in clading on Cill &

Jambs and around the doors/ windows/ ventilation with 12 mm thick

cement motor CM (1:4) and fixing with cement slurry & adhesive

including moulding of exposed edges as directed by engineering in

charge etc. complete.

65 Wall Painting (Two coats) with weather proof acraylic emulsion paint 942.00 Sqmt 120.26

of approved brand and manufacture and of required shade on exterior

wall surface to give an even shade over of approved brand after

thoroughly brushing surface to remove all dust and remains of loose

powdered material etc. copm. for all height

66 Providing and fixing Roller blinds of made out of imported fabric 37.50 Sqmt 3310.78

including channels ropes runners ,weights etc as per design and

installed as per with proper fixing as directed by engineer in charge

67 Providing and laying controlled cement concrete M-200 and curing 28.80 Cumt 4680.34

complete including the cost of form work with Ply & Cuplock but

excluding the cost of reinforcement for reinforced concrete work in (C)

68 Providing TMT Bar FE 500D reinforcement for R.C.C. work including 5765.00 Kg 77.29

bending, binding and placing in position complete up to All floor Level

69 Boring holes 3.5 m deep in ordinary soil (for cast in situ piles) and 33.00 Nos 1561.19

getting out the soil and disposal of the surplus excavated soil as

directed within a lead of 50 Meter for following diameter of pipes.(iii)

70 Excavation for foundation upto 1.50 mt depth including sorting out 26.00 Cumt 123.13

and stacking of useful materials and disposing the excavated stuff

with all lead and lift. (A) Loose or soft soil.

71 Providing and laying controlled cement concrete M-200 and curing 8.00 Cumt 6413.50

complete including the cost of form work with Ply & Cuplock but

excluding the cost of reinforcement for reinforced concrete work in

Ground & Plinth Beams

72 Providing and laying controlled cement concrete M-200 for R.C.C. 9.00 Cumt 4610.16

bored piles of All diameter including ramming, vibrating, curing and

finishing complete.

73 Brick work using common burnt clay building bricks crushing strength 74.00 Cumt 4604.04

not less than 35 Kg/Sq.cm. in super structure above plinth level upto

floor two level in cement mortar 1:6 (1cement : 6 fine sand) (B)

Conventional For Ground floor to First floor

74 20 mm Thick sand faced cement plaster on walls upto height 10 meters 242.00 Sqmt 347.42

above ground level consisting of 12 mm Thick backing coat of c.m. 1:3

(1 cement : 3 sand) and 8 mm Thick finishing coat of c.m. 1:1 (1 cement

: 1 sand) with 1x1cm Groves at juction of structure member etc.

comp.etc. complete.

75 Providing 20 mm thick double coat mala cement plaster on interior 398.00 Sqmt 286.10

brick / concrete work for plastering comprising of base coat of 12 mm

thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in

rough finishing and 8 mm thick top coat of cement mortar 1:2 (1

Cement : 2 Coarse sand) finished with trovel including scaffolding

curing etc. complete.For Ground floor

76 Providing 10 mm. Thick Mala cement plaster in single coat for 22.50 Sqmt 159.20

plastering on ceiling and soffits of stairs and finished even and smooth

in : (I) Cement mortar 1:4 (1 cement : 4 sand) including Mala troveled

finish etc. complete.For Ground floor

77 P & L 60x60 cm' Vitrified Tiles 10 mm thick tile flooring over 20 mm 139.90 Sqmt 1092.37

(average)base of cement mortar 1:6 (1cement : 6 coarse sand)on new

surface or fixing on existing flooring by adhesive materials including

dismentalig of existing flooring and jointed with colour cement slurry

including finished with flush pointing & cleaning the surface etc.

complete including colour approved by directed.

78 P & L 60x60 cm' Vitrified Tiles 10 mm thick tile flooring over 10 mm 9.20 Sqmt 1592.40

(average)base in risers of steps,skirting Dedo and pillars laid on 10mm

thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with

colour cement slury mixed with pigment to match the shade etc.

complete including colour approved by directed.

79 Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge & 15 82.50 Sqmt 1674.15

mm Thick Densified edges on the Tile Periphery for Extra Strength The Light weight calcium silicate ceiling

tiles shall have , light reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity resistance

and also having thermal conductivity0.043° w/m KC.for the best thermal Insulation . The Light weight

calcium Silicate tile shall be of approved texture Fine fissured/Spintone/Cosmos having NRC value of

& Globe having NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to be laid on true horizontal

level suspended inter locking metal grid of hot dipped galvanized steel sections (galvanizing @120 grams

per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length

and size of 24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’

of size 24X28mm made out of 0.33mm (Minimum) sheet spaced 1200mm along spaced between main ‘T’

at 600mm centre to centre to form agrid of 1200X600mm and secondary cross ’T’ of length 600mm and

size 24x28mm made of 0.30 mm thick (Minimum) sheet to be interlocked at middle of the 1200X600mm

panel to form grid of size 600X600mm resting on periphery walls/partitions on a perimeter wall angle pre-

coated steel of size (24X24X3000mm made of 0.40mm thick (minimum) sheet with the help of rawl plugs

at 450mm centre to centre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick

Densified edges light weight calcium silicate ceiling tiles of approved texture (Fine

Fissured/Cosmos/Spintone) in the grid including, cutting /making opening for services like diffusers, grills,

light fittings, fixtures, smoke detectors etc., wherever required, Main ‘T’ runners to be suspended from

ceiling using G.I. slotted cleats of size 25X35X1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash

fasteners, 4mm G.I. adjustable rods with galvanized steel level clips of size 85X30X0.8mm,spaced at

1200mm centre to centre long main ‘T’ bottom exposed with 24mm of all T-sections shall be pre-painted

with polyester baked paint, for all heights, as per specifications, drawings and as directed by engineer-in-

charge.Note:- Only calcium silicate false

ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening

(cut outs) having area less than 0.30 sqm. The calcium silicate ceiling tiles shall have NRC. Value of

(Minimum) for Fine fissured/Spintone/Cosmos and 0.75 NRC for Globe, light reflection 85% non-

combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity.

0.043° w/m KC.for the best thermal Insulation

80 Providing & Supplying Executive Table having size of 2100 mm X 900 4.10 Sqmt 13985.47

mm X750mm (Height) with Top 12mm toughened glass in required size

including three drawers and 1350 mm X 400 mm X550mm

(Height)Side Rack with three shutter storage cabinet. teakwood leg

support and 1 mm lamination in single or double shade & colour as

directed on all visible face and 0.80 mm white lamination on all non

visible faces Hettich make telescopic sliding channel, Enox make S.S.

sliding rail, S.S. Decorative handle, Ebco make Keyboard tray with

necessary fixtures & fasteners of standard make as per detail drawing

and image also including all labours as approved by engineer-in-charge

81 Providing & Supplying Executive High Back Revolving Chair HOF, Alto, 1.00 Nos 20907.00

Nilkamal or equivalent company make office chair of make size with

high back (25 mm thick U foam inside) on Mild steel crome plated base

anti tilt mechanisum frame High quality product, Tilt mechanism with

tiltlocking , moulded foam seat & back penumatic height Adjustment

Upholstered in high quality double leather Swivel Mechanisum & Twin

wheel casters with , Great finish, Dimensions in mm seat Height 470mm

to 550mm Width 28'inch & depth 25'inch height 21'inch , decorative

wooden with dunlop sheet arms - its lowest height is 36 inches and

heighest is 41 inches Product, Made from strong sturdy material and

colour as per suggested by Engineer in Charge or image. Chair should

confirm ANSI BIFMA Standards.

82 Specification:- Providing Material & Labour charges for making 208.90 Sqmt 6514.50

VINEER FINISH BOX WALL PANELING FOR WALL having size of

suggested sizes. all exposed finished with 4 mm thk vineer finished with

pu polish. The Box Paneling ply is rest on aluminum framing of 50 mm

x 25 mm have grid size of 750mm x 750 mm Complete with all

hardwares like hinges, S S screws, Nails etc. as given in detail drawings

and instructed by architect/incharge engineer. Please see the Attached

Make List for Apporoved Makes. Basic rate of vineer is 1700.00 rs per

sq mt. Use of teak wood bidding of appropriate size at each joints

83 Providing & erecting open well horizontal mono block pump set with 1.00 Nos 25987.30

cast iron body, complete for three phase submersible motor having [E]

For 7.5 HP 3 phase open well horizontal mono block pump set suitable

for 1550 LPM to 370 LPM @ 13.5 Mtr to 42 Mtr head suitable for 65/75

mm dia delivery pipe Cat.II

84 Supplying & erecting approved make motor control cubical panel [Star 1.00 Nos 13182.52

delta] made from 16G CRCA sheet duly epoxy powder painted inside

and outside with hinged doors and locking with suitable size of ON -

OFF isolator (AC 3 / 23 duty) main fuses. Digital volt and current meter

(in a single unit) with micro controller based control unit and current

sensing single phasing preventer electronic overload protection, over

voltage (Programmable) protection and under voltage (Programmable)

protection, prod less dry run protection programming facility for

setting of all parameter like overload current, high voltage limit, low

voltage limit, dry run limit with digital indication on seven segment LED

display for any fault like over load, high voltage, low voltage, dry

running single crimped, electronic star delta timer, feather touch start /

stop push buttons to be erected on angle iron frame. Grouted on wall

the contactors will be of L& T, Siemens , BCH make only) (A) S/D up to

Rupees Two Crore Thirty Six Lakh(s) Ninety One Thousand Six Hundred Thirty Seven And Paise Sixty Only

I/We am /are willing to carry out the work at…………% above/below percent (should be written in figures and words) at the

estimated rates mentioned above amount of my/your tender works out as under.

*Estimated Amount *Estimated Amount

put to Tender Rs. 23691637.60 put to Tender Rs.

Deduction …………….. % below………………… Add ………… % above Rs. …………….

1 The Credit Value of Dismentalled Materials of Amount Rs.28440.00 (Rupees Twenty Eight Thousand Four Hundred

Forty Only) shall be recovered from the 1st Running Bill of the Contractor.

2 The Contractor shall be exhibit board as per government circular No.BDG/3277/1657 N dated 26/01/1997 S (M.GUJ)

with detailed specification and details of work and amount Involved at site without any payment as directed by

Engineer-In-Charge.

3 All work shall be carried out as per public work department hand book and other specifications of Division or as

4 All columns in the Schedule should be filled in ink & the total of the entries in the last column should be struck by

Contractor under his sign.

5 Rates quoted include clearance of site (Prior commencement of work and its close) in all respects and hold good for

work under all condition, site, moisture/ weather etc.

6 The Boards stating the detailed specification & detailes of Work shal be provided by the contractor as per Government

Resolution T.No.1890-240- Dtd.18/11/1990 and directed by contractor at his own cost immediately on recommanding

the work order.

7 Testing of Material Shall be done as per the statement attached with specification,The material IS Tested in GERI by

Executive Engineer Surat and Bill for the testing charges shall be paid by Executive Engineer,1% of the Amount put to

8 1% of the Construction Cost Shall be deducted from the bill Amount of the contract as per the Buildig and other

Construction works walfare cess at 1996(Labour and Employment Department Letter No CWA-2004-1831-M(3)Dated

9/12/2005 notification Of Labour & Employment department dt.03/01/2005 & Labou & Employment Department

Letter no GWA/2004-841M(B) Dt 14/12/2005 & Dt.30/1/2006.

9 In Case of RCC items Where there is a change in Grade of Mix or Change as per Actual Mix design the cost of difference

of Cement Difference shall be deducted from the rate of original item at the rate of star rate mentioned in the tender.

10 Contractor are advised to visit site before loading tender rate.

11 Necessary wiring point and drainage point are installed at Site however any modification in electrical installation and

drainage & water supply connection and minor correction to perform experienced in Lab shall be done by contractor

at his risk and cost.

12 The Rates are inclusive of all the taxes (Excluding GST),Transport Charges,Octroi duty and storage Charges up to date.

13 The materials Covered for wiring should be got approved from the Engineer Incharge of the work.

14 GST and Income tax TDS will be deducted at a source while making payments of bills.

15 GST will be paid extra as per Govt. amendment.

16 The Materials on the work shall have to be used and carried out as specified in technical note.

I/We hereby Declare that I/we have Visited the site and fully Exquisite myself/ourselves with the local situation

regarding materials,Labour and other factors pertaininfg to work before submitting tender.

I/We hereby Declare that I/we have carefully Studied the condition of Contracts,Detailed Specification and other

tender Document of this work and agree to execute the same accordingly.

Deputy Executive Engineer

Surat (R&B) Sub-Division No.

Signature of Bidder

Executive Engineer

Surat (R&B) Division No.1