Repairs to 250 KVA electric Sub-Station at Lift Irrigation cum Dewatering Scheme Neejkhai of MISD Pattan.

Fabrication, Providing and erection of steel tubular HT poles 410-SP-33, 09 m long with base plate 350mm×350mm×05 mm of 250 KVA substation. The job includes earthwork excavation of trunch not less than 2ft X2ftX5ft. The Job also includes earthing of poles.

Cement bottoming including muffing of ST poles in M15 mix as per REC standards with 20mm stone aggregate including all formwork, and carriages upto site complete. The muffing dimensions are dia - 500mm, height - 1.5 ft

Painting of pole with one coat of Red-oxide and two coats of Aluminium paint ( including cost of paint).

Providing and fitting of ISMC 75, 8rft in length each (05 no). The nut and bolts required for fitting of channels shall be provided by the firm. The channels are required for fitting of link set and drop out set, lightening arrestor and for placing pin insulators for tapping of HT line.

Providing and fitting of cross arms on HT poles for placing of pin insulators and making the ACSR conductor to run through the HT frame. The cross arms are to fabricated out of ISMC 75 (4rft) - 02 no and ISA 40x40x3 (4rft) - 02 no.

Providing and fitting of ISMC 150, 8rft in length each (02 no). The nut, bolts, clamps required for fitting of channels shall be provided by the firm. The channels are required for placing of transformer.

Providing, installation and fixing of 11kva dropout set with nuts, bolts, washer, clamps as per the site requirements.

Providing and fitting of post type (polymer type) lightening arrestor set

Providing and installation of earthing using GI electrodes of size 20mm dia , 8rft long connected with 25x3mm GI connection strip (strip price excluded) from transformer body, nuetral and ligtening arrestor to electrode.

Providing and fitting of GI earthing strip of size 25x3mm including nuts, bolts etc