16/2025-26/EDCR Increase load Capacity of 11/0.04 Substation and Installation of new transformer and other electric works under Business Plan 2025-26 under jurisdiction of EDC, Rampur.

Amount

Carriage of the following material from Store Centre, Rampur to work site including loading & unloading.

PCC Pole 11 Mtr Long

Polymeric 11 KV Pin Insulator

Disc fitting 11 KV

Disc insulator 11 KV

Earthing of Pole

Top Channel 100*50*2400mm

Dropper Channel 100*50*32mm

T-Off Channe, 100x50x2240mm

T-Off Channe, 125x65x1300mm

Stay set Complete

250 KVA T/F

11 KV Fuse Set

LT Incoming Pannel with Metering Equipments

LT PVC Cable 3.5x150/70 SQmm

LT PVC Cable 3.5x400 SQmm

LT PVC Cable 1x240 SQmm

LT ABC 3x120 Sqmm Cable

ACSR Weasel Conductor

100 KVA Transformer (Recived Back Site to Store)

AI Scrap (in KG)(Recived Back Site to Store)

Double Pole Structure Excavation of foundation Pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole), providing and laying of stone pad (300x300x75 mm) in the Bottom of the pit. Erection of support(pole) complete with fixing of 11 KV V-type cross-Arms and other accessories by providing clamps made of MS flat of size 65x65xc6 mm with Nuts & Bolts, as per RESPO Norms.

11 Mtr long PCC Pole

Grouting of support in CC 1:4:8(cement, sand & 40 mm. brick ballast) Grouting will be done in the block of size 45x45cmx1/6th of full length of the support upto ground level, 30 cm plinth above the ground level with CC 1:3:6 (cement, course sand and stone grit) with muffing. The work includes back filling and proper ramming etc. Double Pole Structure

11 Mtr long PCC Pole

Grouting of Stay Rods(20x1800)mm including all work of excavation, cement concrete in size of (0.60x0.60x0.30)M in the ratio of 1:4:8(cement, sand, 40mm brick ballast) including back filling of soil and proper ramming etc.

Fixing, tightening and nozelling of stay wire with stay rod with the pole of required tension by providing stay clamps.

Earthing of support with MS Earth Rod of (20x2500)mm long including excavation of pit and driving MS Rod 3.0 M apart from support and 0.5 M below the ground level and connecting below the earth electrodes with the help of GI wire No. 8SWG and earthing lugs.

fixing of 11 KV Pin Insulator with Pin as per RESPO Norms and as per direction of Supervising Engineer.

fixing of 11 KV Disc Insulator with Fitting as per RESPO Norms and as per direction of Supervising Engineer.

laying ,stringing and binding of LT PVC Cable 3.5x150/70 SQmm as per RESPO Norms and as per direction of Supervising Engineer.

laying ,stringing and binding of ACSR Weasel Conductor as per RESPO Norms and as per direction of Supervising Engineer.

laying ,stringing and binding of LT PVC Cable 3.5x400 SQmm as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of LT PVC Cable 1x240 SQmm as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of laying LT ABC 3x120 Sqmm Cable as per RESPO Norms and as per direction of Supervising Engineer.

Dismentalling of old T/F and installation/Mounting of 250 KVA T/F as per RESPO Norms and as per direction of Supervising Engineer.

Installing of 11 KV fuse set as per RESPO Norms and as per direction of Supervising Engineer.

fixing of LT Incoming Panel with Metering Equ as per RESPO Norms and as per direction of Supervising Engineer.

Providing and fixing Al Leg long Barrel of Size per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing of Suspension Clamp with I Hook as per RESPO Norms and as per direction of Supervising Engineer

Making of Plinth for T/F Size 2x2x1.5Mtr as per RESPO Norms and as per direction of Supervising Engineer(complete material provide by contractor)

Fencing of T/F per RESPO Norms and as per direction of Supervising Engineer(complete material provide by contractor)

Providing and fixing 4 Core LT MCB with Box as per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Danger Board with clamp per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Stone Pad per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing LT Clamp RESPO Norms and as per direction of Supervising Engineer

Providing and fixing PG clamp RESPO Norms and as per direction of Supervising Engineer

Providing and fabrication, Complete installation of Henley type Tailless Fuse Unit frame made of 70cm x 50cmx 6 mm, M.S. Angle with fixing 500 Amp with copper Bus Bar. Fabrication and fixing of all bus bar of size 400mm x 50 mm x10mm and then grouting Tailless frame on the plinth of T/f with making the connection at T/f with earthing and Line side complete work all material shall be provided by the contractor. Cable for connection will be provided by the Department.

Providing and fixing Dead end Clamp with I Hook as RESPO Norms and as per direction of Supervising Engineer

Providing and fixing of LT piercing Connector as per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Copper L Piece 62x225x12 mm as per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Copper L Piece 50x225x10 mm as per RESPO Norms and as per direction of Supervising Engineer

Dismentaling of old and used AI Scrap as RESPO Norms and as per direction of Supervising Engineer

S A TRADERS (BID ID -5537753)

M/s Charley Enterprises (BID ID -5537589)