MLA ADF 2019-20 Asset Development works in Angamaly Constituency - protection works and waiting shed.

Amount

Appendix A - Canal Works

15.2.1 : Demolishing cement concrete manually / by mechanical means Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) including disposal of material within 50 metres lead etc complete as per the direction of departmental officers at site

2.6.1 : Earth work in excavation in all classes of soil by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, with all leads and lifts, disposed earth to be levelled and neatly dressed etc complete as per the direction of departmental officers at site

4.1.8 : Providing and laying in position cement concrete of specified grade 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) excluding the cost of centering and shuttering all work up to plinth level etc complete as per the direction of departmental officers at site

4.3.1 : Centering and shuttering including strutting, propping etc. and removal of form work etc complete as per the direction of departmental officers at site

5.1.3 : Providing and laying in position specified grade of reinforced cement concrete,1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) excluding the cost of centering, shuttering, finishing and reinforcement,all work up to plinth level etc complete as per the direction of departmental officers at site

5.22.6 : Steel reinforcement for R.C.C work using Thermo - Mechanically Treated bars of grade Fe-500D or more including straightening, cutting, bending, placing in position and binding all complete upto plinth level etc complete as per the direction of departmental officers at site

13.16.1 : Providing and laying 6 mm thick cement plaster of mix:1:3 ( 1 cement : 3 fine sand)etc complete as per the direction of departmental officers at site

8.9.1.2 : Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement ,.Granite of any colour and shade etc complete as per the direction of departmental officers at site

16.21 : Engraving letters in hard stone etc complete as per the direction of departmental officers at site

Appendix B - Waiting shed

15.7.4 : Demolishing brick work In cement mortar manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead etc complete as per the direction of departmental officers at site

15.3 : Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead etc complete as per the direction of departmental officers at site

2.6.1 : Earth work in excavation in all classes of soil by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, with all leads and lifts, disposed earth to be levelled and neatly dressed etc complete as per the direction of departmental officers at site

4.1.8 : Providing and laying in position cement concrete of specified grade 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering all work up to plinth level etc complete as per the direction of departmental officers at site

4.3.1 : Centering and shuttering including strutting, propping etc. and removal of form work etc complete as per the direction of departmental officers at site

5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, 1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size excluding the cost of centering, shuttering, finishing and reinforcement ,all work up to plinth level etc complete as per the direction of departmental officers at site

50.6.2.1 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete as per the direction of departmental officers at site

5.22.6 : Steel reinforcement for R.C.C work using Thermo - Mechanically Treated bars of grade Fe-500D or more including straightening, cutting, bending, placing in position and binding all complete upto plinth level etc complete as per the direction of departmental officers at site

10.28 : Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)etc complete as per the direction of departmental officers at site

8.2.2.2 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish at all levels etc complete as per the direction of departmental officers at site

11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments (B47Size of Tile 600 x 600 mm )etc complete as per the direction of departmental officers at site

12.48 : Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern etc complete as per the direction of departmental officers at site

13.28.3 : Providing and laying 12 mm thick plain cement mortar bands in cement mortar 1:4 ( 1 cement : 4 fine sand),Raised Band etc complete as per the direction of departmental officers at site

13.1.2 : Providing and laying 12 mm cement thick cement plaster of mix:1:6 (1 cement : 6 fine sand) etc complete as per the direction of departmental officers at site

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface using Water thinnable cement primer etc complete as per the direction of departmental officers at site

13.48.1 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications, Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm etc complete as per the direction of departmental officers at site

8.9.1.2 : Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement (Granite of any colour and shade) etc complete as per the direction of departmental officers at site

16.21 : Engraving letters in hard stone etc complete as per the direction of departmental officers at site

od17736/2020_2021/IA : Lettering name board using Forest tray with Acrylic projection letter, board with all cost, conveyance, fitting charges etc.. complete. etc complete as per the direction of departmental officers at site

WILSON THOMAS

Bidder Name

WILSON THOMAS

P G S GROUP TRADING AND CONTRACTING