Construction of Kodeeri Anganwadi, Pothukallu GP

Amount

anganwadi construction

Stone for masonry work

Portland Cement

Coarse sand (zone III)

Structural steel such as tees, angles, channels and R.S. joists

Red oxide Zinc chromate primer

Sundries

Adjustable telescopic prop 3 m (2.02-3.75m)

Beam clamp 300-380 mm (450-1070 mm)

Stone Aggregate(single size):20 mm nominal size

Stone Aggregate(single size): 10 mm nominal size

Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper

Vibrator (Needle type 40 mm)

wall form panel 1250x500 mm

Corner angle 45x45x5 mm 1.50 m long

100 mm channel shoulder 2.5 m long

Double clip (bridge clip)

Single clip

M.S. Tube 40 mm dia

Wall form panel 1250x450xmm

Corner angle 45x45x5 mm 2.50 long

Column clamp 450x1070 mm

Prop 2 m (2-3.5m)

Solid blocks of size 30x20x20cm

Second class kail wood in planks

Second class kail wood in scantling

Hollock ballies 125 mm diameter

Adjustable span ESO+SI (2.35-3.40)

Twisted steel/deformed bars

Plasticizer / super plasticizer

Production cost of concrete by batch mix plant

Pumping charges of concrete including Hire charges of pump, piping work & accessories etc.

Bright finished or black enameled mild steel butt hinges 75x47x1.70 mm

Fine sand (zone IV)

Multi surface paint

Special primer (C.W)

Mild Steel round bar above 12 mm dia

Flats up to 10 mm in thickness

Second class teak wood in planks

Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm

Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm

Bright finished or black enameled mild steel screws 40 mm

Bright finished or black enameled mild steel screws 20 mm

Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)

Stone Aggregate(single size): 40 mm nominal size

Vitrified floor tile 60x60 cm

Deharadun white lime

Synthetic enamel paint in black or chocolate shade

Mild steel round bar 12 mm dia and below

Welding by electric plant

GI trafford profile sheet 0.35mm thick

Bitumen washer

Stainless steel screws 50 mm

G.I. pipes 40 mm dia

Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black

Vitreous China orrisa type w.c. pan size 580 mm

Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)

100 mm S.C.I. trap with vent heel

Interlocking C.C. paver block (80 mm thick, M-30)

Stone Aggregate(single size): 06 mm nominal size

MATHUKUTTY

MUJEEB RAHMAN