Repair of DYSPMC and Hospital at Nahan, Sirmaur (HP)

Amount

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal al lead dressing of sides and bottom and backfilling in trenches with excavated suitable material. including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and laying cement concrete 1:4:8 (1 cement:4 sand:8 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in: foundation and plinth: including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and laying cement concrete 1:1.1/5:3 ( 1 cement 1 .1/5 Sand : 3 graded stone aggregate 20mm nominal size) to obtain the minimum crushing strenth of grade 20mm mechnically mixed vibrated curring complete excluding cost of form work and reinforcement for feinorced concrete work in foundation footings bases of columns and the like and mass concrete as per entire satisfaction of the Engineer-in-charge.

Providing mild steel/Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level : Tor Steel including all leads, lifts and carriage of materials.

Providing form work with steel plates 3.15mm (Three point fifteen milimeter) welded with angle iron in frame 30x30x5mm(Thirty into Thirty into Five milimeter) so as to give a fair finish including centering, shuttering, strutting and propping etc. height of propping and centering below supporting floor to ceiling in all heights and removal of the same for in situ reinforced concrete and plain concrete work upto floor to all level including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.in flat surfaces such as soffits of suspended floors, roofs, landings and the like. Floors etc. upto all thickness

In foundation,footings bases of columns etc. and mass concrete.

Beams, cantilevers, girders, and lintels, sides and soffits of Beams, beam haunchings, cantilevers, girders, bressumers and lintels not exceeding 1 meter (One meter)in depth in all heights upto all floor level

In columns, pillers, posts and struts, square, rectangular or polygonal in plan upto all thickness upto all floor level

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 P.C.C grade M 10 Nominal mix 1:3:6 (One cement: three sand: six graded stone aggregate. including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Brick work using common burnt clay building bricks in foundation and plinth in :-Cement Mortar 1:6 (1 Cement : 6 Sand) Second Class Bricks including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Half brick masonry in 2nd class common brunt clay building bricks in super strucutre in cement mortar 1:4 ( 1 cement : 4 sand) up to floor all level including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

15mm (fifteen millimetre) cement plaster in single coat on fair side of brick/concrete/stone wall for interior plastering upto floor all level including arises, internal rounded angles, chamfers and or rounded angle in all girth & finished even & smooth on rough side with cement mortar 1:6 (one cement : six sand)upto all floor level including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

15mm (fifteen millimetre) cement plaster in single coat on rough side of brick/concrete/stone wall for interior plastering upto floor all level including arises, internal rounded angles, chamfers and or rounded angle in all girth & finished even & smooth on rough side with cement mortar 1:6 (one cement : six sand) upto all floor level including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

6mm (six millimetre) cement plaster to ceiling in cement mortar 1:4 ( one cement: four sand) including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing vitreous China water closet squatting pan (English type WC pan ) size 580mm (five hundred eighty milimetre) ( earth work,bed concrete, foot rest and trap to be measured and paid for separately (Orrisa Pattern) including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing vitreous China wash down,water closet squatting pan (Indian type W.C pan) size 580mm (Earth work, bed concrete, foot rest and trap to be measured and paid for separately). Orrissa Pattern including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and fixing C.P. Jet includingcarriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fittings and clamps including making good the wall,ceiling and floor 15 mm(Fifteen milimeter) nominal bore. including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fittings and clamps including making good the wall,ceiling and floor 25 mm(Twenty five milimeter) nominal bore. including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangment including hoisting up to all heights above ground level: 1000 litres net capacity tank. including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing on wall face PVC (D-plast) 110 mm dia for rain water pipes including filling the joints with approved adhesive complete including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete 110 mm dia including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing PVC collers ISI marked including fixing with approved adhesive etc. complete. 110 mm dia. including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing PVC fittings and accessories - Tee including carriage of materials with in all leads,lifts and other incidentals complete as per entiren satisfaction of the Engineer-in-charge. 110mm Nominal Size.

Providing and fixing cast iron floor trap of self cleaning desion with sand cast iron screwed down or hinged grating with out vent arn complete including cost of cutting and making goods the walls and floors :- including carriage of materials with in all leads,lifts and other incidentals complete as per entiren satisfaction of the Engineer-in-charge. 110 mm nominal diameter

Providing and fixing PVC 'P' or 'S' trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete. including carriage of materials with in all leads,lifts and other incidentals complete as per entiren satisfaction of the Engineer-in-charge. 110 mm dia.

Providing and fixing 10.0/12.50/15.00(Ten /Twelve point Five/Fifteen) liters PVC China low level flushing cistern with a pair of C.I. Or mild steel brackets ,complete with fittings such as lead valveless syphon,15mm(Fifteen milimeter) nominal size brass ball valve with polythene float, C.P. Brass handle union and coupling for connection with inlet,outlet pipe and over flow pipes, 40mm (forty milimetre )dia C.P. flush bend including cutting holes in walls and making good and connecting the flush bend with cistern and closet (overflow) pipe to be measured and paid for separately including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing vitreous china wash basin with single hole for pillar tap with C.I. or M.S brackets painted white including cutting holes & making good the same but excluding fittings 630mm x 450mm ( six hundred thirty into four hundred fifty milimetre) including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing kitchen sink stainless steel kitchen sink of approved standard ISI make with drain board and CP. waste with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting. 610 x 460 mm with bowl depth 200mm. including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing C.P. Brass waste for wash basin or sink :-32mm dia including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing 32mm(Thirty Two milimeter) dia.lead waste pipes for wash basin or sink including brass check nut including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing 600mm x 450 mm bevelled edge miror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers. including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing C.P. Brass Towell rail coplete with C.P. Brass brackets fixed to wooden pluges with C.P. Brass screws :- 750mm x 20mmm including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and fixing CP Brass towel ring complete including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing charomium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws :-including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and fixing brass bib tap (Superior or heavy type) :-15mm dia including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and fixing CP Brass Pillar Tap with capstan head:-15mm(Fifteen milimeter) dia.including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing P.V.C connection with brass unions :- 300/450mm length :- 15mm nominal bore including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and fixing gate valve 25mm including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge. Sintex Make including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and fixing C.P. brass angle valve 15mm without Nuts and pipe. 15mm dia including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and fixing 110 mm dia grating for gully, floor or Nahni trap. including carriage of materials with in all leads,lifts and other incidentals complete as per entiren satisfaction of the Engineer-in-charge.

White glazed tiles 6mm thick in skirting risers of step and dado 12mm thick cement mortar 1:3 (one Cement:three sand) and jointed with cement slurry including carriage of materials with in all leads,lifts and other incidentals complete as per entiren satisfaction of the Engineer-in-charge.

Providing and laying spartic ceremic tiles 5.5mm.thick in flooring (300 x300mm. size) treads of steps laid on a bed of 12mm. thick cement mortar 1:3(1cement: 3 sand) finished with flush pointing in white cement. including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings fixed with approved adhesive jointed with cement slurry mixed with pigment to match the shade of tiles as required complete. including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and Fixing Exhaust fan complete including all fittings with all leads ,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing vitreous china bowl pattern urinal (flat type 430mm*260mm*350mm complete including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Supplying cast iron cover without frame for manholes: i) For frame of internal dimension 455mm x 610mm (Four hundred fifty five milimeter into Six hundred ten milimeter) rectangular C.I. Cover (light duty single seal pattern-1) the weight of cover to be not less than 23kg. (Twenty three kilograme) including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Constructing man hole with Reinforced Cement Concrete top slab in 1;2;4 mix in (One cement two sand;four graded crushed stone aggregate 20mm (twenty milimetre nominal size),foundation concrete 1;4;8(One cement;four sand:eight graded crushed stone aggregate 40mm (forty milimetre )nominal size,inside plastering 15mm (fifteen milimetre thick with cement mortar 1;3(One cement:three sand),finished with a floating coat of neat cement and making channels in cement concrete 1;2;4mix (One cement;Two sand:four graded crushed stone aggregate 20mm (twenty milimetre) nominal size, finished smooth complete including curing and testing.Inside size 800x800mm (eighty hundred into eight hundred milimetre ) and 1.00 (one )metre deep including C.I.cover with frame.(Light duty single (seal) pattern-I) 450mmx610mm (four hundred fifty into six hundred ten milimetre) internal dimensions total weight of cover and frame to be not less than 38 kgs(thirtry eight kilogramme) ( Weight of cover 23 kgs (twenty three kilogramme) and weight of frame 15 kgs(fifteen kilogrammes) with 200mm (two hundred milimetre) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 ( 1 cement: 3sand). including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing anodized aluminium sliding door bolts anodised transparent or died to required shade and colour with bolts,nuts and screws etc. complete including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.. (a) 250 X16 mm( Two hundred fifty into Sixteen milimeter)

Providing and fixing aluminium Tower botls (barrel type) anodized transparent or dyed to required Shade & colour with screws etc. complete including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge. 250x10mm.

Providing and fixing anodized aluminium handles anodised transparent or died to required shade and colour with screws etc. complete including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge. 125mm.

Providing and fixing brass hydraulic door closure with necessary nut bolts and screws all complete as per the direction of Engineer-in-Charge

Providing and fixing double leg aluminum door stopper to aluminum shutters as per the direction of Engineer-in-Charge

Providing and fixing oxidized M.S. hooks and eyes. 300 mm (Three hundred millimetre) including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 (ONe thousand two hundred eighty five) anodised transparent or dyed to required shade according to IS 1868. (One thousand eight hundred sixty eight) (Minimum anodic coating of grade AC 15(Fifteen ) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/ panelling C.P. brass/stainless steel screws. All completeas per architectural drawings and the directions of Engineer-In-Charge. For doors windows and ventilatiors and glazed partitions frames.including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Supplying and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary:- Plain Glass: 4mm thick. including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

P/F 12 mm thick prelaminated board both side bwp phenol bonded exterior/interior grade panalled shutters with frame of first class deodar wood for doors including bright finished/black enamelled iron butt hinges with necessary screws 40 mm thick frame.including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Finishing wall with weather proof exteriior grade emulsion of approved design (apexultima ) or its equarlied on undecorated wall surface (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dir, dust and other foreign matter etc including sand paper smooth complete including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Distempering (Two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surfaces free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer. Upto Floor all level including carriage of materials with in all leads, lifts and other incidentals charges complete as per entire satisfaction of the Engineer-in-charge.

Applying Birla white care putty over plaster surface after throughly brushing the surface free from morter drops.dust, loose materials and other foreign matters sand papering smooth to give final finish to the surface complete. including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Applying a priming coat with cement primer on concrete/masonry/asbestos cement/plaster surface after and including prepraring the surface thoroughly cleaning oil,grease,dirt and other foreign matter,sand papering as required. including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Dismantling doors, windows and clerestory windows, ventilators etc. (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachements etc. complete and stacking them within 20 metres lead Not exceeding 3 sq.m in area including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Demolition of brick work below G.L. upto floor two level including stacking of servicable materials and and disposal of unserviceable materials within 20 metres lead including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

RAJ KUMAR

Pratap Singh

Rakesh Chaudhary

Vaibhav Thakur