CA NO. CE CHZ AMB T 03 2020 21 ADDITION/ALTERATION AND UPGRADATION OF MD ACCN OFFICERS JCOS AND ORS AT AMBALA CANTT

Amount

ITEM NO. 1 : Cutting holes n. exc 150 Sq. cm into or through brick walls built in cement mortar 1:3 and making good in cement concrete 1:2:4 type B-1 as required complete all as specified and directed by Engineer-in-Charge.

ITEM NO. 2 : Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings, converting window into door openings etc. or cutting out defective brick work for under- pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc. to store and rubbish not exc. 50 m from site complete all as specified and directed by Engineer-in-Charge.

ITEM NO. 3 : Forming jambs, etc to openings, including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work; built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

ITEM NO. 4 : Rendering 15 mm thick in cement mortar 1:3 (5mm thick rendering provided as floating/ setting coat over 10 mm thick rendering ) on fair/unfair faces of brick/concrete surface as in sunken portion complete all as specified and directed by Engineer-in-Charge.

ITEM NO. 5 : Taking down Cement plaster or cement lime plaster on brick or stone walls incl raking out joints hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

ITEM NO. 6 : Rendering 15 mm thick in cement mortar 1:6, on fair faces of brick or concrete surfaces , trowelled to even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.

ITEM NO. 7 : Rendering 15 mm thick in cement mortar 1:6,on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing , trowelled to even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.

ITEM NO. 8 : Rendering 15 mm thick in cement mortar 1:4, on brick or concrete surfaces mixed with water proofing compound, trowelled to even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. NOTE: Water proofing compound will be measured and paid for separately.

ITEM NO. 9 : Rough cast plastering over and including 10 mm thick rendering in cement mortar 1:3 and while it is still in plastic state, the rough cast mixture consisting of crushed stone or fine gravel aggregate ( of size between 6 to 12 mm ) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even. The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregates are thoroughly covered complete all as specified and directed by Engineer-in-Charge. Note:- Rough cast plaster shall be applied as specified in clause 14.22 of SSR Part-I .

ITEM NO. 10: Supply only liquid water proofing compound ISI marked complete all as specified and directed by Engineer-in-Charge.

ITEM NO.11 : Rendering 5 mm thick in cement mortar 1:4 as in soffits of slabs/Chajja/ Sunshade finishing the plastered surface even & smooth w/o using extra cement etc complete all as specified and directed by Engineer-in-Charge.

ITEM NO.12 : Rendering dubbing out average 10mm thick in cement mortar 1:4 on irregular surface of soffits of slabs/Chajja/ Sunshades etc. complete all as specified and directed by Engineer-in-Charge.

ITEM No 13. Cleaning the wall surface with wire brush & water and applying a coat of super latex compound mixed in ratio of 1:4:7 (Super latex + water + cement) on brick/concrete surfaces before applying rendering all as recommended by manufacturers and complete all as specified and directed by Engineer-in-Charge.

ITEM NO.14 : Preparation of untreated / old external surfaces of walls including brooming down and applying white cement based wall care putty in two coats and minimum thickness 1.00 mm in each coat and finished thickness not less than 1.00 mm after applying emery paper or sand paper and two coats of weather proof exterior emulsion paint, over a coat of primer as per manufacturers instructions etc complete all as specified and directed by Engineer-in-Charge.

ITEM No 15. : Preparation of untreated plastered or old decorated wall surface by applying white cement based wall care putty in two coats and minimum thickness 1.00 mm in each coat and finished thickness not less than 1.00 mm after applying emery paper or sand paper to get smooth surface to receive painting complete all as specified and directed by Engineer-in-Charge.

ITEM NO.16 : Preparation of newly plastered of wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed by Engineer-in-Charge.

ITEM NO.17 : Preparation of rough cast plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed by Engineer-in-Charge. (Note:- Measurment purpose only flat surface shall be measured)

ITEM NO.18 : Complete removal of existing treatment including preparation of wall surfaces and applying two coats of cement base paint over a coat of white cement based primer incl preparation of surface complete all as specified and directed by Engineer-in-Charge.

ITEM NO.19 : Preparation of old decorated plastered/unplastered wall surfaces and applying two coats of cement base paint complete all as specified and directed by Engineer-in-Charge.

ITEM NO.20 : Complete removal of existing treatment on walls and preparation of surface and applying two coats of acrylic distemper over a coat of primer including white cement based wall care putty in two coats and minimum thickness 1.0mm in each coat and finished thickness not less than 1.5 mm after applying emery paper or sand paper, if undulation is more than thickness may be more and make the wall undulation free complete all as specified and directed by Engineer-in-Charge.

ITEM NO.21 : Preparation of old Plastered or un-plastered surfaces of walls cornices etc by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss, efflorescence salts treating oil and greasy spots etc and applying one coat of white wash on walls/ old decorated surfaces complete all as specified and directed by Engineer-in-Charge.

ITEM NO.22 : Preparation of old Plastered or un-plastered surfaces of ceilings etc by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss, efflorescence salts treating oil and greasy spots etc and applying one coat of white wash complete all as specified and directed by Engineer-in-Charge.

ITEM NO.23 : Complete removal of existing treatment of old ceiling and preparation of ceiling surfaces & applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.

ITEM NO.24 : Preparation of plastered or unplastered new surfaces of walls and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.

ITEM NO.25 : Preparation of plastered or unplastered new surfaces of ceiling and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.

ITEM NO.26 : Demolition of cement concrete (reinforced) and (reinforcement cut as required to facilitate demolition) as in roofs, floors (other than ground floors) beams, slabs, staircases, landing, chajjas and similar suspended work complete all as specified and directed by Engineer-in-Charge.

ITEM NO.27 : Demolition of cement concrete (reinforced) and (reinforcement cut as required to facilitate demolition) of any description & in any position of facia / downward facia including cutting of reinforcement and finishing the surface with cement mortar 1:4 including providing of throating/drip-course complete including cutting of reinforcement complete all as specified and directed by Engineer-in-Charge.

ITEM NO.28 : Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves inncluding supports, overhangs, etc. also splays between floors and beams, etc. (rough finished flat surfaces of concrete), complete all as specified and directed by Engineer-in-Charge.

ITEM NO.29 : Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings , slab over manholes similar work; not exceeding 200mm thick (Horizontal or sloping) (rough finished flat surfaces of concrete), complete all as specified and directed by Engineer-in-Charge.

ITEM NO.30 : Use and waste of Formwork to sides and soffits of plinth bands , lintel bands, shelves etc and edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide complete all as specified and directed by Engineer-in-Charge.

ITEM NO.31 : Use and waste of form work to chullah hoods, chajjas, troughs and similar items including edges and similar work for fair finish surfaces complete all as specified and directed by Engineer-in-Charge.

ITEM NO.32 : Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide (rough finished surfaces of concrete), complete all as specified and directed by Engineer-in-Charge.

ITEM NO.33 : Cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span, bed block , copings and the like including weathering, slightly rounded or chamfered angles and throating with and including using necessary use and waste of formwork complete all as specified and directed by Engineer-in-Charge.

ITEM NO.34 : Reinforced Cement Concrete of M25 design mix using 20mm graded crushed stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engineer-in-Charge. NOTE: Reinforcement will be measured and paid for separately.

ITEM NO.35 : Reinforced Cement Concrete of M25 design mix using 20mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engineer-in-Charge. NOTE: Reinforcement will be measured and paid for separately.

ITEM NO.36 : Reinforced Cement Concrete of M25 design mix using 20mm graded crushed stone aggregate as in chajjas and the like complete all as specified and directed by Engineer-in-Charge. NOTE: Reinforcement will be measured and paid for separately.

ITEM NO.37 : TMT steel bars 10mm dia and over, of grade Fe-500D cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

ITEM NO.38 : TMT steel bars 6-8mm dia, of grade Fe-500D cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

ITEM NO.39 : TMT steel bars 5mm dia and over upto and including 10mm dia , of grade Fe-500D cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips in strirrups , spacers and binders complete all as specified and directed by Engineer-in-Charge.

ITEM NO.40 : Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

ITEM NO.41 : Demolition of Cement Conc. Unreinforced as in G.F & paving n. exc. 15cm thick (above or below G.L.) complete all as specified and directed by Engineer-in-Charge.

ITEM NO.42 : Cement concrete (1:5:10) type E-2, using 40 mm graded stone aggregate 75 mm thick as in sub base of floor complete all as specified and directed by Engineer-in-Charge.

ITEM NO.43 : Cement concrete (1:2:4) type B-0, using 12.5 mm graded stone aggregate 25 mm thick as in sub base of floor and pavings etc. complete all as specified and directed by Engineer-in-Charge.

ITEM NO.45 : First quality, Non skid ceramic, coloured, rectified i.e. straight edge (locally known as joint free) tiles of size 600 x 600mm each and of thickness not less than 7mm, in verical surfaces such as skirtings, dados and risers to steps etc (by cutting the tiles to required height) over & including 10 mm thick cement mortar (1:4) screed, set and jointed with tile adhesive with notched trowel and pointed in grout of matching shade of tiles, complete all as specified and directed by Engineer-in-Charge.

ITEM NO.46 : Non - skid coloured Ceramic tiles 400 x 400 x 6 to 7 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over and including 15 mm thick cement mortar (1:4) screed bed and pointed in white or coloured cement to match the tiles complete all as specified and directed by Engineer-in-Charge.

ITEM NO.47 : Glazed ceramic coloured tiles 450 x 300 x 6 to 7 mm thick (square/ rectangular) or of size area of each tile exceeding 0.12 sqm but not exceeding 0.18 sqm, on vertical surface such as skirting , dado etc. over 10 mm thick rendering in cement mortar 1:4 thick set and jointed in neat cement mortar and pointed in white or colour cement to match tiles complete all as specified and directed by Engineer-in-Charge.

ITEM NO.50 : Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc of any description or thickness, laid, bedded and pointed in any mortar complete all as specified and directed by Engineer-in-Charge.

ITEM NO.51 : Machine cut Kota stone slab flooring 18-22 mm thick, for staircase step in single piece (of length not more than 1200 mm), laid over over & including 15 mm thick (average thickness) cement mortar (1:3) screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polishing (mirror finish) complete, including provn of two Nos 3x3mm grooves at tread of each step complete all as specified and directed by Engineer-in-Charge.

ITEM NO.52 : Machine Cut Kota stone slab 18-22 mm thick on vertical surfaces like riser of steps, skirting, in single piece (of length not more than 1200 mm) over & including 10 mm thick (average thickness) cement mortar (1:3) screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (Mirror finish), complete all as specified and directed by Engineer-in-Charge.

ITEM NO.53 : Machine cut Kota stone slab flooring 20-25 mm thick, laid over & including 20 mm thick screed bed in cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror finish) complete all as specified and directed by Engineer-in-Charge.

ITEM NO.54 : Machine cut Kota stone slab flooring 18-20 mm thick as in skirting, dado and pillar, laid over & including 10 mm thick rendering in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror finish) complete all as specified and directed by Engineer-in-Charge.

ITEM NO.55 : Granite jet black shade, 15-18 mm thick, (table rubbed and polished) in single piece (in one direction) machine cut, machine polished, bedded and jointed with adhesive suitable for granite/stone & pointed with grout of matching shade including necessary cutting, over & including 20 mm thick (average thickness) cement mortar (1:3) screed, as in cooking platform, shelves, RCC counters, window cills & similar situations, complete all as specified and directed by Engineer-in-Charge.

ITEM NO.56 : Baroda green marble, 15-18 mm thick, (table rubbed and polished) machine cut, laid over & including 15 mm thick (average thickness) cement mortar (1:3) screed and bedded, jointed with grey cement slurry & pointed with grout of matching shade including rubbing and polishing (Granite finish), over cooking platform complete all as specified and directed by Engineer-in-Charge.

ITEM NO.57 : Rounding to edges ( both side edges ) of stone slabs (of any description) , such as in steps, cooking platform, and other similar situations including rubbing and polishing (mirror finish), complete all as specified and directed by Engineer-in-Charge.

ITEM NO.58 : Taking down chowkaths or frames n.exc 1.5 sqm (without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts complete all as specified and directed by Engineer-in-Charge.

ITEM NO.59 : Taking down chowkaths or frames Exc 1.5 sqm but n.exc 4 sqm (without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc complete all as specified and directed by Engineer-in-Charge.

ITEM NO.60 : Taking down shutters of any description n exc 1 Sqm each and removing from the site complete all as specified and directed by Engineer-in-Charge.

ITEM NO.61 : Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each and removing from the site complete all as specified and directed by Engineer-in-Charge.

ITEM NO.62 : Taking down of wooden door shutter of any description and refixing of shutter, area n.exc 1 Sqm in same opening after repair/easing etc complete all as specified and directed by Engineer-in-Charge.

ITEM NO.63 : Taking down of wooden door shutter of any description and refixing of shutter, area exc 1 Sqm and not exc 2 sqm in same opening after repair/easing etc complete all as specified and directed by Engineer-in-Charge.

ITEM NO.64 : Dismantling structural steel work including doors, gates but excluding framed truss etc. and including erection and refixing of old framed work as in doors or gates of angle or other section with gusset plates, rails, braces, ect. complete drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guides) and fixing complete all as specified and directed by Engineer-in-Charge.

ITEM NO.65 : Factory made Pressed steel frames, confirming to IS, having profile 125 x 60 mm , 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, and fixing only 100 mm size hinges, lock strike plate, etc., with one shop coat of zinc chromate primer and fixing complete all as specified and directed by Engineer-in-Charge. Note: Mild Steel butt hinges will be measured and paid for separately as supply only under relevant item.

ITEM NO.66 : Factory made Pressed steel frames, confirming to IS, having profile 105 x 60 mm , 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, and fixing only 100 mm size hinges, lock strike plate, etc., with one shop coat of zinc chromate primer and fixing complete all as specified and directed by Engineer-in-Charge. Note: Mild Steel butt hinges will be measured and paid separately as supply only under relevant item.

ITEM NO.67 : Plain, solid, straight 2nd class Hard wood chowkhats and frames, wrought, framed rebated on solid, rounded or chamferred, put together with glue pinned at joints supplied and fixed complete all as specified and directed by Engineer-in-Charge.

ITEM NO.68 : 35mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engineer-in-Charge.

ITEM NO.69 : 35 mm thick factory made glazed & Skeleton shutters of 2nd class hard wood open rebated & prepared to receive glass or gauze etc without sash bar open rebated with edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass or guage etc size ofstiles rails etc as specified in sec 8 clause 8.24 (a) of SSR Part-I (2010) complete all as specified and directed by Engineer-in-Charge.

ITEM NO.70 : Solid PVC door frames of size 50mm x 47 mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube, and edges will be painted to match with printed sheet, supply & fixing in opening as per specification & drawing complete all as specified and directed by Engineer-in-Charge.

ITEM NO.71 :Factory Made Solid PVC Moulded flush Door Shutter, 28 to 30mm thick(stiles), with 2, 4, or 6 raised panel design with WOOD GRAINED printed 4mm thick Moulded PVC Sheet on the front face & 4mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed by Engineer-in-Charge.

ITEM NO.72 : Factory made box type steel windows with pressed steel frame complete including mild steel acessories like lugs, door stopper, holdfasts, pintol hinges, handles( minimum One for each shutter), and ISI marked tower bolt 150mm size (minimum 2 for each shutter) etc. with or without glazing bars dovetailed or welded with one shop coat of zinc chromate primer, complete all as shown on drawing No. TD-276(R), Sheet No 1/4 to 2/4, 3/4, 4R/4 and as specified and directed by Engineer-in-Charge. Note: (i) Fabrication as per TD-276 (R) SH 1/4 to 2/4, 3/4, 4 (R) /4 (ii) Mode of measurement Unit will be in Kilogram for the complete window except Glass/ Gauge but incl fittings, ISI marked iron mongery and Grill/ Guard bar complete as per TD. The weight of windows will be finalized by the BOO to be convened by CWE. The weight shall not include PCC back filling of the chowkhat. (iii) The PCC back filling in chowkhat of window, Sheet glass and wire gauge will be measured and paid for separately against respective items.

ITEM NO.73 : Factory made steel window fixed type (fabricated from P-tube section as shown on drawings) including necessary mild steel acessories etc. with glazing bars dovetailed or welded with one shop coat of zinc chromate primer, complete all as shown on drawing No. TD-220R Sheet 3/3 and as specified and directed by Engineer-in-Charge.

ITEM NO.74 : Stainless steel butt hinges 100 mm long heavy weight and fixed complete all as specified and directed by Engineer-in-Charge.

ITEM NO.75 : Aluminium alloy anodised extruded fabricated type handle 150mm long and fixed complete all as specified and directed by Engineer-in-Charge.

ITEM NO.76 : Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 250 mm long and fixing with bolts extruded sections or cast aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge.

ITEM NO.77 : 200 mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer-in-Charge.

ITEM NO.78 : Mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed by Engineer-in-Charge.

ITEM NO.79 : Plain cement concrete (1:3:6) type C-2,using 20 mm graded mechanically crushed stone aggregate as in filling pressed steel frame /hold fast blocks etc and similar complete all as specified and directed by Engineer-in-Charge.

ITEM NO.80 : Dismantling stucturel steel work as in door chowkats, shutters, guard bars and similar items but excluding framed truss complete all as specified and directed by Engineer-in-Charge.

ITEM NO.81 : Mild steel framed work of Fe-410W (Gde E-250) quality as in gates made of angle and other sections with gusset plates rails braces etc. complete including drilling and welding for fixing of steel sheeting or other covering of doors , gates (as shown in drgs) etc to be prepared for hanging or sliding with and including drilling and welding for fixing of steel sheeting or other covering of doors gates etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting( Exclusive of steel sheeting or other covering running rails and guides) and fastening and fixing, complete all as specified and directed by Engineer-in-Charge.

ITEM NO.82 : Mild steel plates (plain or chequered) for covering to steel doors, gats including necessary welding Fe- 410w (Gde E 250) quality A and fixing complete all as specified and directed.

ITEM NO.83 : Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.

ITEM NO.84 : Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples but fixed as in repairs complete all as specified and directed by Engineer-in-Charge.

ITEM NO.85 : Hacking out old broken glass (any thickness, size , quality or description) from wooden, glazed with putty or fixed with beads including clearing rebates for re-glassing, taking out beads, removing rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

ITEM NO.86 : Sheet glass 4 mm thick, ordinary quality and glazing with linseed oil pane putty & spring glazing clips and using Silicon for fixing of glass in addition to glazing putty, in squares not exceeding 0.5 Sq.m in each pane, complete all as specified and directed by Engineer-in-Charge.

ITEM NO.87 : 4 mm thick figured glass pin head type and glazing with oil putty in sq n exc 0.5 sqm each and using Silicon for fixing of glass in addition to glazing putty complete all as specified and directed by Engineer-in-Charge.

ITEM NO.88 : Preparation of newly or previously untreated wooden surface of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engineer-in-Charge.

ITEM NO.89 : Preparation of newly primed surfaces of steel and iron of any descrption not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

ITEM NO.90 : Preparation of newlyor previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed by Engineer-in-Charge.

ITEM NO.91 : 150 mm size mild steel helical door spring including roller and roller plate fixed to wooden chwkhats or welded to angle iron door frames using with flat iron 40x3 mm size 75 cm long with necessary bolts, etc. complete all as specified and directed by Engineer-in-Charge.

ITEM NO.92 : Supply only 50 mm long cold rolled mild steel butt hinges medium weight complete all as specified and directed by Engineer-in-Charge. Note: The hinges shall be fixed complete as per item of steel windows/doors here-in-before.

ITEM NO.93 : Supply only 100 mm long cold rolled mild steel butt hinges medium weight complete all as specified and directed by Engineer-in-Charge. Note: The hinges shall be fixed complete as per item of steel windows/doors here-in-before.

ITEM NO.94 : Preparation of old or previously treated wooden surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge.

ITEM NO.95 : Preparation of old or previously treated steel and iron surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge.

ITEM NO.96 : Preparation of old steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge.

ITEM NO.97 : 100mm long hasp and staple safety type Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engineer-in-Charge.

ITEM NO.98 : 25mm dia stainless steel fancy type drapery rod of wall thickness 0.9 mm including taking out of old pelmet/bracket, complete all as specified and directed by Engineer-in-Charge.

ITEM NO.99 : Stainless steel bracket and stainless steel fancy type fennel complete all as specified and directed by Engineer-in-Charge. Note: The quoted rate includes one pair comprising of two brackets and two fancy type fennels.

BLANK

ITEM NO.101 : Factory made mild steel door shutter with frame, fabricated from of 1 mm thick MS sheet including provision of steel handle & locking arrangement by providing 04 lever lock with duplicate keys (of make Godrej, Link or Harrison or equivalent makes as mentioned in Appendix B) & handle etc, including spray painting over a coat of red oxide primer and fixed the same on existing cupboard nitch with MS Fasteners with cement & sand mortar, complete all as specified and directed by Engineer-in-Charge. Note :(i) The shutter area only shall be measured for the payment. (ii) Refer TD-161.2.1 & 161.2.2 and 162.2.1 & 162.2.2

ITEM NO.102 : Stainless steel plate rack standard size 1000mm x 750mm mm of wt not less than 8kg each complete and fixing with rawl plug and steel screws including taking down old plate rack of any size where exist , complete all as specified and directed by Engineer-in-Charge.

ITEM NO.103 : Rubber strips 3 to 4mm thick & 65mm to 75mm wide fixed on bottom rail of door for covering gaps between door & floor to avoid entry of insects,dust etc complete all as specified and directed by Engineer-in-Charge.

ITEM NO.104 : Dismantling wooden boarding of any description, in any position with nails as in shelves of cup board and pelmets of any description complete all as specified and directed by Engineer-in-Charge.

ITEM NO.105 : Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work 18/19mm thick (as in shelves) built in cup boards / partitions and kitchen CB shutters etc. complete all as specified and directed by Engineer-in-Charge.

ITEM NO.106 : 18/19 mm thick pre-laminated particle board exterior grade with decorative choice lamination face on one side and balancing white on other side as in cup board shutter, Kitchen Cabinet shutter, shelfs, showcase drawer fixed with screws to timber frame work complete all as specified and directed by Engineer-in-Charge.

ITEM NO.107 : 18/19 mm Plywood, grade BWR, type BB, fixed with nails to timber frame work as kitchen cabinets incl all necessary fitting/ clamps to wall/ complete all as specified and directed by Engineer-in-Charge.

ITEM NO.108 : 6 mm thick Plywood, grade BWR, type BB, fixed with nails to timber frame work on back of cabinets of kitchen cabinets incl all necessary arrangement complete all as specified and directed by Engineer-in-Charge.

ITEM NO.109 : Decorative laminate type 1 of thickness 0.9mm surface finish, coloured , pattern as approved, fixed with approved adhesive (Fevicol) as per manufacturer's instructions complete all as specified and directed by Engineer-in-Charge.

ITEM NO.110 : Decorative laminate type 1 of thickness 0.9mm of surface finish, white as approved by GE, fixed with approved adhesive(Fevicol) as per manufacturer's instructions complete all as specified and directed by Engineer-in-Charge.

ITEM NO.111 : 6 mm thick Ist class H/W lipping fixed on cut edgeing of plywood with adhesive incl necessary polishing complete all as specified and directed by Engineer-in-Charge.

ITEM NO.112 : Wooden plain fillets of second class hard wood sectional area exc 3 and n.exc 6 sqcm. complete all as specified and directed by Engineer-in-Charge.

ITEM NO.113 : Stainless steel (302 grade) modular kitchen pull out trays, baskets, cutlery trays, big utensil trays etc. of shape & size as directed by Engineer-In-Charge alongwith fixing acessories complete all as specified and directed by Engineer-in-Charge. Make : HETTICH, KAFF, GLEN and GODREJ.

ITEM NO.114 : Zinc Coated Mild steel telesopic channel of best quality available in the market complete all as specified and directed by Engineer-in-Charge. Make : HETTICH, KAFF, GLEN and GODREJ.

ITEM NO.115 : Stainless steel handle 150 mm long for kitchen cabinets/Cupboards of best quality complete all as specified and directed by Engineer-in-Charge.

ITEM NO.116 : 100 mm long extruded Stainless steel handles, fabricated type polished complete all as specified and directed by Engineer-in-Charge.

ITEM NO.117 : Continuous (piano hinges) 30mm width of flap, in repairs, Paino hinges, mild steel bright finish complete all as specified and directed by Engineer-in-Charge.

ITEM NO.118 : Magnetic catches with PVC body and MS plate and skirting plate including letting in and fixed complete all as specified and directed by Engineer-in-Charge.

ITEM NO.119 : Beading of first class soft wood of cross sectional area 19 mm X3 mm fixed with polish head less nails to pre-laminated particle board including two coats of synthetic enamel paint over a coat of primer complete all as specified and directed by Engineer-in-Charge.

ITEM NO.120 : Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like of 1st class Hardwood, including all necessary' labours; articles n exc 200 cu. cm each complete all as specified and directed by Engineer-in-Charge.

ITEM NO.121 : Running welding, in repairs, to hinges of steel window/pressed steel door and steel ladder of various guard post /watch towers and making good for opening of doors/window shutters thickness of metal to be welded exc 6 mm but n exc 9 mm complete all as specified and directed by Engineer-in-Charge.

ITEM NO.122 : Running welding in repairs to steel ladder of various guard post /watch towers and making good, thickness of metal to be welded exc 6mm but n.exc 9mm complete all as specified and directed by Engineer-in-Charge.

ITEM NO.123 : Welding, in repairs, exc 2.5 cm but n.exc 5 cm in length and making good thickness of metal to be welded exc 6mm but n-exc 9mm complete all as specified and directed by Engineer-in-Charge.

ITEM NO.124 : Taking down Eaves gutter/rain water pipe( AC rain water pipe /SWG pipe line of any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. including cleaning for refixing or removal to Store (Measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed by Engineer-in-Charge.

ITEM NO.125 : Demolition and breaking up 150 mm bore drain pipes (salt glazed stone ware pipes) set in cement mortar complete all as specified and directed by Engineer-in-Charge.

ITEM NO.126 : Taking up or down steel tubing and connections of 15mm bore in pipe, including cleaning for re-fixing or removal from site to store complete all as specified and directed by Engineer-in-Charge.

ITEM NO.127 : Taking up or down steel tubing and connections of 20mm bore in pipe, including cleaning for re-fixing or removal from site to store complete all as specified and directed by Engineer-in-Charge.

ITEM NO.128 : Steel water tubing, galvanised, medium grade, ISI marked, 15 mm bore with and including all fittings , cutting, threading and fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

ITEM NO.129: Steel water tubing, galvanised, medium grade, ISI marked, 20 mm bore with and including all fittings , cutting, threading and fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

ITEM NO.130 : Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed Conduit(TV/Tele Socket) etc., and making good, cutting not exc 10cm girth and complete all as specified and directed by Engineer-in-Charge.

ITEM NO.131 : Refixing old GI tubing 15mm bore galvanised with all new fittings as in walls,ceilings or floors etc complete all as specified and directed by Engineer-in-Charge. Note:-Old pipes as retrieved from dismantling herein before.

ITEM NO.132 : Refixing old GI tubing 20mm bore galvanised with all new fittings as in walls,ceilings or floors etc complete all as specified and directed by Engineer-in-Charge. Note:-Old pipes as retrieved from dismantling herein before.

ITEM NO.133 : Vitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), P or S trap, including taking down existing complete all as specified and directed by Engineer-in-Charge.

ITEM NO.134 : PVC water closet seat cover , white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer-in-Charge.

ITEM NO.135 : Vitreous China squatting pan of “Orissa Pattern” of size 580x440mm, white with integral footrest including taking down existing complete all as specified and directed by Engineer-in-Charge. Note : The quoted rate shall include provision of "P" Cast Iron trap.

ITEM NO.136 : 10 ltr capacity PVC valveless, syphonic action dual flush type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, 32 mm dia flush pipe including taking down existing complete all as specified and directed by Engineer-in-Charge.

ITEM NO.137 : CP health faucet including 0.90 mtr long flexible tube including taking down existing complete all as specified and directed by Engineer-in-Charge. Make: ESSCO Cat Part No ALE-583 or equivalent makes as mentioned in Appendix 'B'.

ITEM NO.138 : PTMT jet spray with 1.00 metre PVC tube , (suitable for European seat) including taking down existing complete all as specified and directed by Engineer-in-Charge. Make: PRAYAG Cat Part No 5221 or equivalent makes as mentioned in Appendix 'B'.

ITEM NO.139 : CP toilet paper holder with flap model including taking down existing complete all as specified and directed by Engineer-in-Charge.

ITEM NO.140 : Pillar tap fancy type chromium plated, screwed down high pressure, with or without lettered 'Hot'or cold with cast copper alloy with capston head long screwed shanks and fly-nuts, screwed for iron pipe of 15mm bore and fixed including taking down existing complete all as specified and directed by Engineer-in-Charge. Make:- ESSCO Cat Part No SQT-507KN or equivalent makes as mentioned in Appendix 'B'.

ITEM NO.141 : Vitreous china wash hand basin white flat back of size 550 x 440mm including CI brackets , chromium plated waste coupling, waste pipe etc., (incl all waste fittings) including taking down existing complete all as specified and directed by Engineer-in-Charge.

ITEM NO.142 : Brass CP WHB Mixer valve for mixing hot and cold water screwed down for 15mm dia iron pipe complete all as specified and directed by Engineer-in-Charge. Make:- ESSCO Cat Part No SQT-516KN or equivalent makes as mentioned in Appendix 'B'. Note: The quoted rate shall include the long braided hoses 450mm long for connection to mixer complete.

ITEM NO.143 : 15 mm fancy type chromium plated fancy type bib tap brass long body with flange screwed down high pressure CP cast copper alloy with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union including taking down existing complete all as specified and directed by Engineer-in-Charge. Make:- ESSCO Cat Part No SQT-512KN or equivalent makes as mentioned in Appendix 'B'.

ITEM NO.144 : 15 mm fancy type chromium plated fancy type bib tap brass long body with flange screwed down high pressure CP cast copper alloy with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union complete all as specified and directed by Engineer-in-Charge. Make:- ESSCO Cat Part No SQT-512KN or equivalent makes as mentioned in Appendix 'B'.

ITEM NO.145 : Bib tap, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, suitable for 15 mm bore pipe, complete all as specified and directed by Engineer-in-Charge. Make: ESSCO Cat Part No SQT-511KN or equivalent makes as mentioned in Appendix 'B'.

ITEM NO.146 :Stainless steel grating doom openable 100mm sq size (Minimum Weight 25 grams) with/without hole including fixing with white cement including taking down existing complete all as specified and directed by Engineer-in-Charge.

ITEM NO.147 : 15mm bore angle cock / stop valve cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle including taking down existing complete all as specified and directed by Engineer-in-Charge. Make ESSCO Cat Part No SQT-526KN or equivalent makes as mentioned in Appendix 'B'.

ITEM NO.148 : Angle cock , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, of 15mm bore complete all as specified and directed by Engineer-in-Charge. Make ESSCO Cat Part No SQT-526KN or equivalent makes as mentioned in Appendix 'B'.

ITEM NO.149 : Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, of 20mm bore including taking down existing complete all as specified and directed by Engineer-in-Charge.

ITEM NO.150 : Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, all as specified, of 15mm bore, fancy type, chromium plated with long shank and cup (Concealed type) including taking down existing complete all as specified and directed by Engineer-in-Charge. Make: ESSCO Cat Part No SQT-514AKN or equivalent makes as mentioned in Appendix 'B'.

ITEM NO.151 : Fancy type shower rose 125mm dia size of Rim and 30cm long CP brass pipe with swiwel joint including fixing to steel pipe or union including taking down existing complete all as specified and directed by Engineer-in-Charge. Make - ESSCO Cat Part No EOS-542A and ALE-536A or equivalent makes as mentioned in Appendix 'B'.

ITEM NO.152 : Chromium plated hand shower with 1.5 mtr long flexible tube including taking down existing complete all as specified and directed by Engineer-in-Charge. Make: ESSCO Cat Part No EHS-1931 or equivalent makes as mentioned in Appendix 'B'.

ITEM NO.153 : CP wall mixer telephonic type for mixing hot and cold water screwed down for 15 mm dia iron pipe complete all as specified and directed by Engineer-in-Charge. Make:- ESSCO Cat Part No SQT-517KN or equivalent makes as mentioned in Appendix 'B'.

ITEM NO.154 : Corner glass shelf, size not less than 240mm, with CP stand including taking down existing complete all as specified and directed by Engineer-in-Charge.

ITEM NO.155 : Sheet glass shelf assembly consisting of 5.5 mm th sheet glass shelf 12 cm wide with chromium plated guard and railing 60 cm long including taking down existing complete all as specified and directed by Engineer-in-Charge.

ITEM NO.156: CP Soap dish, fixed to plugs with chromium plated brass screws, in repair complete all as specified and directed by Engineer-in-Charge.

ITEM NO.157 : Brass chromium plated, tubular towel rail, 20mm dia, 60cm long between flanges including taking down existing complete all as specified and directed by Engineer-in-Charge. Make: ESSCO Cat Part No AEC-1111 or equivalent makes as mentioned in Appendix 'B'.

ITEM NO.158 : PVC connections 15mm size with PTMT nuts of length 450mm including taking down existing complete all as specified and directed by Engineer-in-Charge.

ITEM NO.159 :Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe incl bedding in cement mortar to dwarf wall or cantilever brackets and connecting union to pipe overall size 915x460mm, bowl size 410x 330x160mm incl all fittings ie CP waste coupling, waste pipe, including taking down existing complete all as specified and directed by Engineer-in-Charge.

ITEM NO.160 : Sinks without drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe incl bedding in cement mortar to dwarf wall or cantilever brackets and connecting union to pipe overall size 495 x 420mm, bowl size 410 x 330x160mm incl all fittings ie CP waste coupling, waste pipe, complete all as specified and directed by Engineer-in-Charge.

ITEM NO.162 : PVC cabinet with looking mirror of size 350 x 450mm complete all as specified and directed by Engineer-in-Charge.

ITEM NO.163 : Dismantling cast iron or RCC drain pipes 100 mm bore jointed in cement mortar from floors/walls etc. and taking out of trenches if required complete all as specified and directed by Engineer-in-Charge.

ITEM NO.164 : Dismantling cast iron or RCC drain pipes 75 mm bore jointed in cement mortar from floors/walls etc. and taking out of trenches if required complete all as specified and directed by Engineer-in-Charge.

ITEM NO.165 : 75mm bore cast iron bends any radius with oval access door and diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engineer-in-Charge.

ITEM NO.166 : 75mm bore cast iron soil waste and vent pipe in any length with or without ears with cement joints fixed to wall complete all as specified and directed by Engineer-in-Charge.

ITEM NO.167 : 100 mm bore cast iron soil waste and vent pipe in any length with or without ears with cement joints laid in trenches or floor complete all as specified and directed by Engineer-in-Charge.

ITEM NO.168 : 100mm bore CI bends (any radius) diminishing pieces or tapers (larger bore mesured) with oval access door complete all as specified and directed by Engineer-in-Charge.

ITEM NO.169 : CI 100mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed by Engineer-in-Charge.

ITEM NO.170 : CI 100mm bore branch piece double (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed by Engineer-in-Charge.

ITEM NO.171 : 100mm bore socket (double collars), complete all as specified and directed by Engineer-in-Charge.

ITEM NO.172 : CI floor traps with grating complete 100mm bore outlet including jointing to waste pipe fixed in cement concrete type B1 1:2:4 complete all as specified and directed by Engineer-in-Charge. Note : The quoted rate shall include embedding the floor trap in PCC block of size 300x300x250 mm block of PCC 1:2:4 type B-2.

ITEM NO.173 : CI Bends (any radius) with duck's foot or heel rest, 75mm bore, complete all as specified and directed by Engineer-in-Charge.

ITEM NO.174 : Extra over cast iron pipes and fittings if lead joint is provided in lieu of cement joint for 100 mm bore pipe, including hacking out cement joints or burning out lead joints of existing pipes and collecting useful materials and removing them to stores/credit complete all as specified and directed by Engineer-in-Charge.

ITEM NO.175 : Extra over cast iron pipes and fittings if lead joint is provided in lieu of cement joint for 75 mm bore pipe including hacking out cement joints or burning out lead joints of existing pipes and collecting useful materials and removing them to stores/credit complete all as specified and directed by Engineer-in-Charge.

ITEM NO.176 : Excavation in trenches in Soft/loose soil not exceeding 1.50 meter wide and not exceeding 1.5 meter in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, laying of pipes etc. and not exceeding 10Sqm on plan and getting out complete, all as specified and directed by Engineer-in-Charge.

ITEM NO.177 : Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick each,excavated soil in trenches complete as in soft/loose soil, complete, all as specified and directed by Engineer-in-Charge.

ITEM NO.178 : Removing surplus soil/ excavated material to a distance exceeding 250 m but n exc 500 m and depositing where directed at a level not exceeding 1.5m above the starting point complete, all as specified and directed by Engineer-in-Charge.

ITEM NO.179 : Concrete bed to SGSW drain pipes of 150mm bore including packing under and hauching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C2 complete all as specified and directed by Engineer-in-Charge.

ITEM NO.180 : Salt glazed stoneware (SGSW) drain pipes, 150 mm bore, (Grade A) laid in trenches to any depth, with and including jointing material and testing complete all as specified and directed by Engineer-in-Charge. Note :- Excavation and earth work and concrete for bed and haunching of pipe will be measured and paid for separately

ITEM NO.181 : 75mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed by Engineer-in-Charge.

ITEM NO.182 : 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed by Engineer-in-Charge.

ITEM NO.183 : 75mm dia, PVC (SWR) floor trap, plain without grating including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.

ITEM NO.184 : PVC (SWR) junction single, (Single'T' 110mm dia), equal or unequal complete all as specified and directed by Engineer-in-Charge.

ITEM NO.185 : PVC (SWR) reducers 110mm size , complete all as specified and directed by Engineer-in-Charge.

ITEM NO.186 : PVC(SWR) bends (any radius), for 110mm bore pipes, with access doors, complete all as specified and directed by Engineer-in-Charge.

ITEM NO.187 : Dismantling old unserviceable cement concrete/PVC water tanks of capacity exc 250 ltrs & n.exc 500 Ltrs including supplying & fixing of PVC water storage tank 500 ltr capacity HDPE triple layered ,white colour cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20 mm GI Pipe connection incl locking arrangement, including supplying & fixing of Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia and (Minimum weight 200 mm - 210 gms ) complete all as specified and directed by Engineer-in-Charge. Note : (i) Inlet, outlet & wash out pipe will be measured paid for separately. (ii) The quoted rate is inclusive of minimum one union each on inlet and outlet of water tank as per size of pipe shall be provided.

ITEM NO.188 : Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position.(cleaning repairing etc measured separately) complete all as specified and directed by Engineer-in-Charge.

ITEM NO.189 : Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of tank capacity n exc 500 Litre complete all as specified and directed by Engineer-in-Charge.

ITEM NO.190 : Salt-glazed stoneware (SGSW) gully traps,150x150 mm square or round mouthed, type "P" setting and jointing to drains with cement mortar 1:1 complete all as specified and directed by Engineer-in-Charge.

ITEM NO.193 : Plain cement concrete (1:4:8) type D-2,using 40 mm graded stone aggregate as in foundations, filling and mass concrete, sub base to paver blocks / floors etc complete all as specified and directed by Engineer-in-Charge.

ITEM NO.194 : Demolition of brick work built in cement mortar incl all quions arches, pillar or any other descrption etc including grabing of trees grouted in walls if any complete all as specified and directed by Engineer-in-Charge.

ITEM NO.195 : Brick work with sub class 'B' bricks, class designation 100, old size bricks straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:4) including corbellings etc, raking out joints internally and also externally (above G.L.) for plastering and externally joints pointed flush below ground level in the same mortar as the work proceeds complete all as specified and directed by Engineer-in-Charge.

ITEM NO.196 : All as per serial item No. 195 here-in-before but except bricks complete all as specified and directed by Engineer-in-Charge. Note:- Old bricks as obtained from demolition will be used in this item as approved.

ITEM NO.197 : Brick work with sub class 'B' bricks, class designation 100, old size bricks, straight or curved on plan in any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.

ITEM NO. 198 : Precast reinforced cement concrete (1:2:4) type B1 using 20mm graded mechanically crushed stone aggregate as in cover slabs for manholes / drains etc set in cement mortar 1:4 with and including using necessary formwork complete all as specified and directed by Engineer-in-Charge. NOTE: Reinforcement will be measured and paid for separately.

ITEM NO.199 : Demolition of cement concrete unreinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge.

ITEM NO.200 : 75 mm thick plain cement concrete (1:3:6) type C-2,using 40 mm graded mechanically crushed stone aggregate as in path/plinth protection finished even and smooth complete without using extra cement complete all as specified and directed by Engineer-in-Charge.

ITEM NO.201 : Plain cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in surface channel/drains inside the manholes , copings, slabs, benching in manholes, haunching around manhole frame for settting and the like including weathering, slightly rounded or chamfered angles and throating with and including using necessary use and waste of formwork for fair finished surface complete all as specified and directed by Engineer-in-Charge.

ITEM NO.202 : PCC 1:2:4 type B-1 (using 20mm graded mechanically crushed stone aggregate) as in surface channels and drains, complete all as specified and directed by Engineer-in-Charge.

ITEM NO.203 : Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc. complete all as specified and directed by Engineer-in-Charge. NOTE:- Inner girth only will be measured for the purpose of payment .

ITEM NO.204 : Add or deduct in serial item No.203 here-in-before for each 25 mm girth or part thereof over or under 30 cm girth complete all as specified and directed by Engineer-in-Charge.

ITEM NO.205 : Dismantling brick or terracing tiles of single layers on roofs incl cleaning of bricks/tiles and removal of unusable bricks/tiles and removal from site, complete all as specified and directed by Engineer-in-Charge.

ITEM NO.206 : Wire brushing and cleaning the top surfaces of tiles, lime terracing or cement concrete, roof surfaces etc. with water including flashings and junction of parapets etc. complete all as specified and directed by Engineer-in-Charge.

ITEM NO.207 : Demolition of mud in roof any thickness (whether full thickness removed or part thereof ) including plastering & leaping complete all as specified and directed by Engineer-in-Charge.

ITEM NO.208 : APP polymeric water proofing membrane minimum 3 mm thick and weighting not less than 3.6 Kg/Sqm black finish reinforced with non-woven polyster matt weight not less than 150 gms/Sqm with thermo fusable finish laid over and including compatible bitumen primer at the rate of 0.40 Ltr/Sqm torching over laps with a propane or abutan gas torch with a over lap of 75 mm at the side and 100 mm at the ends and sealing including applying a coat of cold emulsion bituminious primer all as per manufacturers instructions incl preparation of surface complete all as specified and directed. Note :- The water proofing treatment shall be got carried out by the manufactarer or their authorised applicator's duly approved by GE in writing.

ITEM NO.209 : Plain Cement concrete 1:2:4 type B-1 using 20mm mechanically graded crushed stone aggregate as in padding to roof to maintain the required slope and finished the surface even and smooth without using extra cement including weathering, slightly rounded or chamfered angles and throating with and including using necessary use and waste of formwork for fair finished surface complete all as specified and directed by Engineer-in-Charge.

ITEM NO.210 : Heat resisting painting to Surfaces of any description wood, steel, iron, concrete, brick, stone, APP surface, etc., exceeding 10cm in width or girth incl preparation of APP surfaces complete all as specified and directed by Engr-in-charge

ITEM NO.211 : Plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in roof kerbs or mud stops and benching, rounded or chamfered on edges , coving shall be 150 mm in radius mixed with acrylic based polymer water proofing compound complete all as specified and directed by Engineer-in-Charge. Note : WPC will be measured an paid separately.

ITEM NO.212 : Precast PCC plain factory made tiles, ISI marked, 22 mm thick, of size 250 mm x 250 mm, machine pressed and cut polished and set jointed and pointed in neat cement slurry and fabricated using grey cement & no pigments. over and including 15 mm thick cement mortar (1:3) bedding and joints grouted flush in cement mortar (1:3) mixed with integral liquid water proofing compound over roof surfaces complete all as specified and directed by Engineer-in-Charge.

ITEM NO. 213 :Dismantaling of wall and ceiling boards inany thickness ancl cover fillet etc complete all as specified and directed by Engineer-in-Charge.

ITEM NO. 214 : Plain metal false ceiling of size 600x600x0.5mm TEULAR EDGE TILES in global white powder coated with 60-70 micron front coating laid on 24 mm wide Tee grid - strong section flange colour white having having stitching on the main runner ,1200mm and 600 mm cross Tee with web height of 26 mm .it The tiles should have humidity resistance (HR) of 100% with light reflaction of 62% .Themain runner spaced at 1200mm mix (C/C) securely fixed to the structural soffitd . Hangers ( GI wire of 4mm dia ) to be fixed by approved roof plug ,height and level adjuster and screws ete at mix 1200c/c along the main runner . The first / last suspension system at the end of each main runner should not be greater then 450 mm from the adjacent wall . Flush fitting 1200mm long cross tees to be interlocked between main runner to from 1200x600mm with grid module (24x24x0.3mm) cut cross tees . perimeter trim to be wall angle of size 24x24x0.3mm , secured to wall at 450 mm mix (C/C) incl PVC clip to hold the ceiling tiles , complete all as specified and as directed by Engr-in-charge

ITEM NO. 215 : Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 as in rafters, purlins, vertical posts etc complete all as specified and directed by Engineer-in-Charge.

ITEM NO. 216 : Rolled Mild steel work as in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment for covering to steel doors, gates including necessary welding, confirming to Fe-410-W (Gde-E-250) quality-A complete all as specified and directed by Engineer-in-Charge.

ITEM NO. 217 : Dismantaling of AC roof sheet in roof covaring in any position complete all as specified.

ITEM NO. 218 : Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc, complete all as specified and as directed by Engr-in-charge.

ITEM NO. 219 : Pre painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ridge cover/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed by Engr-in-charge.

ITEM NO. 220 : Taking down rolling shutter of any size and cleaning of spring, roller, bearing, channel and greasing and refixing the same position complete all as specified and directed by Engineer-in-Charge.

ITEM NO. 221 : Providing one layer of guiniting of thickness not exceding 50 mm in CM 1:3 with steel reinforcement including MS chicken wire mesh of weight exceeding 0.25 kg/sqm and n.exe 4kg/sqm if required by means of tinned tracks or welded to existing reinforcement for top & bottom of roof slabs, beams, columns and staircase ets including scaffholding at any height as required complete all as specified and directed by Engineer-in-Charge.

ITEM NO.222 : Removal of demolish / excavated material (mulba/debris) / earth retrieved from above executed works site to out side of defence land all as specified and directed by Engr – in – Charge. Note : Quantity will be measured as stack measure)

ITEM NO.223 : Surfaces dressing in soft/loose soil Not exc. 15 cm deep including cutting of bushes / shrubs not exc. 30 cm girth including grubbing out roots complete all as specified and directed by Engineer-in-charge.

ITEM NO.224 : Taking down Copper/Aluminium point wiring (light, fan, socket or power) complete, any type / size complete with removing all connection and accessories, fittings and fixtures such as switches , sockets, ceiling rose,pendent holder,fan regulator any type , all type of tube light fitting , batten , steel or PVC conduit , casing caping etc and making good the disturbed surface of wall , floor etc. complete all as specified and directed by Engineer-in-Charge.

ITEM NO.225 : Taking down ceiling fan /exhaust fan, of any size or any type complete all as specified and directed by Engineer-in-Charge. Note : All Ceiling fan/Exhaust fan shall be deposited to concerned AGE E/M for repair if required.

ITEM NO.226 : Taking down old unserviceable single phase / three phase electric meter and deposited to concerned maintenance AGE E/M store complete all as specified and directed by Engineer-in-Charge.

ITEM NO.227 : Taking down old and unserviceable sub main wiring any size / type / core incl earth wire complete with batten/conduit etc and making good the disturbed surface to match the existing disturbed surface complete all as specified and directed by Engineer-in-Charge.

ITEM NO.228 : Taking down water heater any type/ size / capacity with all acessories after removing of all connections complete. Note: All Geysers shall deposited to concerned maintanance AGE E/M store for repair if required complete all as specified and directed by Engineer-in-Charge.

ITEM NO.229 : Taking down old and unsrevicable sheet metal enclosure , switch fuse unit , distribution board any type /way / capacity including fuses,MCB's , insulator etc complete after removing all connection and making good the disturbed surface complete all as specified and directed by Engineer-in-Charge.

ITEM NO.230 : Taking down old and unsrevicable MCCBs/MCBs of any capacity, size any type complete all as specified and directed.

ITEM NO.231 : Taking up/down old unserviceable cable any type/any size in trenches complete all as specified and directed by Engineer-in-Charge. Note: Excavation and earthwork will be measured and paid for seperately

ITEM NO.232 : Point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, FRLSH, PVC insulated and unsheathed stranded cable 1100 volts grade, ISI-694 marked TEC and FIA approved in and including heavy duty PVC concealed conduit and its fittings, ISI marked,PVC junction boxes, modular metal sunken/flush boxes with suitable modular cover plate including FRLSH rigid PVC insulated unsheathed stranded copper conductor 1.5 Sq. mm nominal cross sectional area wire as earth continuity conductor upto common earth and connecting to common earth dolly complete and including cutting/chasing of wall complete all as specified and directed by Engineer-in-Charge for the following:-

(a) One light point controlled by one switch/one fan/exhaust fan point controlled by one switch and fan regulater.

(b) socket outlet 3 pin, 5 Amp on independent board.

(c) Socket outlet, 3 pin,5 Amp on the same board with other switches.

(d) One light point controlled by two, 2way switches.

(e) One bell/buzzeer point controlled by one bell push button on the same board with other switches or independent

ITEM NO.233 : Point wiring using approved colour coding as per IS with stranded copper conductor 2.5Sqmm (nominal area ),single core , FRLSH PVC insulated and unshaethed stranded cable 1100 volts grade ISI-694 marked TECand FIA approved in and including heavy duty ,PVC concealed conduit ISI marked for one industrial type metal clad earth plug and socket out let with earth dolly ( suitable for modular switch & socket, modular cover plate/ modular metal/flush boxes) including FRLSH PVC Insulated unsheathed copper conductor 2.5 Sqmm nominal cross section area as earth continuity conductor upto common earth and connecting to common earth dolly complete and including cutting/chasing of wall complete all as specified and directed by Engr in Charge.

ITEM NO.234 : Modular Switch one way 6Amps one module ISI Marked complete all as specified and directed by Engg in Charge.

ITEM NO.235 : Modular Switch one way 16 Amps one module ISI Marked complete all as specified and directed by Engg in Charge.

ITEM NO.236 : Modular Switch Two Way 6 Amps one module ISI Marked complete all as specified and directed by Engg in Charge.

ITEM NO.237 : Modular Bell Push 6 Amps one module ISI Marked complete all as specified and directed by Engg in Charge.

ITEM NO.238 : Modular Socket 6 Amps 5 Pin 2 Module complete all as specified and directed by Engg in Charge.

ITEM NO.239 : Modular Socket 6/16Amps 6 Pin 2 Module complete all as specified and directed by Engg in Charge.

ITEM NO.240 : Modular TV Socket RJ-11 complete all as specified and directed by Engineer-in-Charge.

ITEM NO.241 : Modular Telephone Socket RJ-11 complete all as specified and directed by Engineer-in-Charge.

ITEM NO.242 : Modular fan Regulator step type 2 module complete all as specified and directed by Engg in Charge.

ITEM NO.243 : Point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, FRLSH, PVC insulated and unsheathed stranded cable 1100 volts grade, ISI-694 marked TEC and FIA approved in and including heavy duty PVC concealed conduit, ISI marked, with and inluding mild steel sunken fabricated with 1.60mm MS sheet concealed in walls boxes suitable for switches / sockets etc with earth dolly duly painted with two coats of anti corrosive paint over a coat of red oxide primer internally, and covered with and including suitable plastic laminated sheet top cover 3mm thick fixed with cadmium plated iron screws for housing the switches, switch sockets outets, fan regulators etc including FRLSH PVC insulated,unsheathed stranded copper conductor 1.5 Sq. mm nominal cross sectional area wire as earth continuity conductor upto common earth and connecting to common earth dolly complete and including cutting/chasing of wall complete all as specified and directed by Engineer-in-Charge for the following:-

(a) One light point controlled by one switch/one fan/exhaust fan point controlled by one switch and fan regulater.

(b) socket outlet 3 pin, 5 Amp on independent board.

(c) Socket outlet, 3 pin,5 Amp on the same board with other switches.

(d) One light point controlled by two,2 way switches.

(e) One bell/buzzeer point controlled by one bell push.

ITEM NO.244 : Point wiring using approved colour coding as per IS, with stranded copper conductor 2.5 Sq. mm (nominal area), single core, FRLSH, PVC insulated and unsheathed stranded cable 1100 volts grade, ISI-694 marked TEC and FIA approved in and including heavy duty, PVC concealed conduit, ISI marked, with and inluding mild steel sunken fabricated with 1.60mm MS sheet concealed in walls boxes suitable for switches / sockets etc with earth dolly duly painted with two coats of anti corrosive paint over a coat of red oxide primer internally, and covered with and including suitable plastic laminated sheet top cover 3mm thick fixed with cadmium plated iron screws for housing the switches, switch sockets outets, fan regulators etc including FRLSH PVC insulated,unsheathed stranded copper conductor 2.5 Sq. mm nominal cross sectional area wire as earth continuity conductor upto common earth and connecting to common earth dolly complete and including cutting/chasing of wall complete all as specified and directed by Engineer-in-Charge.

ITEM NO.245 : Switch piano flush type single pole one way, 5 Amps 230V grade ISI marked complete all as specified and directed by Engineer-in-Charge

ITEM NO.246 : Switch piano flush type single pole two way, 5 Amps 230V grade ISI marked complete all as specified and directed by Engineer-in-Charge

ITEM NO.247 : Bell push switch 5 Amps, 230 volt, flush type ISI marked complete all as specified and directed by Engineer-in-Charge.

ITEM NO.248 : Socket outlet non inter locking type 5 pin 5 Amps flush type controlled by one switch 5 Amps ISI marked complete all as specified and directed by Engineer-in-Charge

ITEM NO.249 : Switch 15Amps flush type controlled by one switch 15 Amps ISI marked complete all as specified and directed by Engineer-in-Charge

ITEM NO.250 : Socket outlet non inter locking type 5 pin 5 /15Amps flush type ISI marked complete all as specified and directed by Engineer-in-Charge

ITEM NO.251 : Ceiling rose surface backlite 65 x 20mm size three terminal ISI marked complete all as specified and directed by Engineer-in-Charge

ITEM NO.252 : Electric bell AC, ding dong type, 230 Volt, single pole complete all as specified and directed by Engineer-in-Charge.

ITEM NO.253 : Electronic step type ceiling fan regulator flush type , 240 volt complete all as specified and directed by Engineer-in-Charge.

ITEM NO.254 : Lamp holder suitable for batten fitting insulated body with back plate complete all as specified and directed by Engineer-in-Charge

ITEM NO.255 : Supply only LED bulb 7 watt, 230 volt AC, 50 Hz, Retrofit, B22 base for lamp holder complete all as specified and directed by Engineer-in-Charge. Make : Bajaj, Cat Part No. 830029, Pyrotech Cat Part No. PA-12-D-L-7XOA or equivalent makes as mentioned in Appendix 'B'.

ITEM NO.256 : Tube light fitting ,1x18/20 W LED 230 V, energy efficent batten fitting, with driver etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible cable copper conductor including 18/20 watt LED tube rod complete all as specified and directed by Engineer-in-Charge. Make : HPL Silver series Cat Part No HLPT51820PCGCW / Jaquar Sleek LED, Cat Part No LSLM01R018XW or equivalent makes as mentioned in Appendix 'B'

ITEM NO.257 : 10W Bulk head LED luminaries Die cast aluminium alloy body ,heat resistent prismatic glass cover ,with specially designed gasket incl all accessories & fixtures, internally prewired and connecting by provding copper flexible wire 23/.0076 mm twin core upto fitting, complete in all respects complete all as specified and directed by Engineer-in-Charge. Make : HPL Cat Part No HLPLEDBH10W(CW) / Jaquar Cat Part No LBLK01X010XC or equivalent makes as mentioned in Appendix 'B'

ITEM NO.258 : Decorative Post top lantern LED luminaire with diffuser and painted spun aluminium deflector fitting 25 W with clear acrylic cover complete all as specified and as directed by Engineer-in-Charge. Make : Havells/HPL / Wipro or Equivalent makes as mentioned in Appendix 'B'

ITEM NO.259 : Wall mounted decorative LED 13W luminaire complete all as specified and directed by Engineer-in-Charge. Make of fitting : Jaquar cat part no- KWBCHRMB12021351A or equivalent makes mentioned in Appendix 'B'.

ITEM NO.260 : Surface mounted wall Mirror LED light Compact & sturdy 10 watt LED decorative fixture with anti glare polycarbonate diffuser, multi purpose lighting solution & applications .all accessories & fixtures, internally prewired and connecting by provding copper flexible wire 23/.0076 mm twin core upto fitting, complete in all respects complete all as specified and directed by Engineer-in-Charge. Make : Jaquar Cat part No. LGLZ01X010XC / HPL Cat Part No HLPT51510CW or equivalnet makes mentioned in Appendix 'B'.

ITEM NO.261 : Building security light LED 25W pressure dia cast suitable for single phase 230 V AC supply, including GI pipe 40mm bore light grade bracket 1.2m length made to shape as per site requirement including fixing arrangement complete all as specified and directed. Make : Jaquar cat part No LPRSRT25WXC/Philips/Bajaj or equivalent makes mentioned in Appendix 'B'.

ITEM NO.262 : Sheet metal enclosures with TWO Pin and earth plug sockets controlled by one No. MCB TP rating 20 Amps , 240 Volts grade, including one MCB of 20 Amp including taking down existing complete all as specified and directed by Engineer-in-Charge.

ITEM NO.263 : Vertical sheet metal enclosures for distribution board TPN 6 way, 415 Volts, sheet metal powder coated, IP 43 protection with 200 Amps rated bus bar, double door type, grouted in wall in cement mortar, including MCCB, 415 volts, 4 pole, TPN thermal release, fixed type rating 125 Amps, 16 KA as incomer , 18 module for out going and cable management kit complete all as specified and directed by Engineer-in-Charge. Make : Hager, Cat Part No VYV06DM-P / Indo Asian, Cat Part No 812041 / Legrand, Cat Part No 507751 or equivalent makes mentioned in Appendix 'B'.

ITEM NO.264 : TPN distribution board 6 way (8+18 modules for incomming & out going), 415 Volts, sheet metal powder coated, IP 43 protection including insulated bus bar of suitable capacity, cable management kit, circuit identification level complete all as specified and directed. Make : Hager cat part No VYT06GH/Havelss/Indoasian/Leagrand or equivalent makes mentioned in Appendix 'B'.

ITEM NO.265 : Sheet metal enclosure MCB DB, SPN, 240 volts, 12 way, with 200 Amps rated bus bar double door type grouting in wall in cement mortar 1:3, making good of disturbed surfaces and matching with existing and electrical connections complete all as specified and directed by Engineer-in-Charge. Make : Hager, Cat Part No VYS16G / Indo Asian, Cat Part No 811829 / Havells, Cat Part No DHDPSHODPW16 or equivalent makes mentioned in Appendix 'B'.

ITEM NO.266 : Sheet metal enclosure MCB DB, SPN, 240 volts, 8 way, with 200 Amps Rated bus bar double door type grouting in wall in cement mortar 1:3, making good of disturbed surfaces and matching with existing and electrical connections complete all as specified and directed by Engineer-in-Charge. Make : Hager, Cat Part No VYS08G / Indo Asian, Cat Part No 811826 / Havells, Cat Part No DSSDBX0196 or equivalent makes mentioned in Appendix 'B'.

ITEM NO.267 : RCBOs for earth leakage, overload & short-circuit protection, 4 Pole , 7 modules as incommer, EARTH LEAKAGE, OVERLOAD & SHORT- CIRCUIT PROTECTION220 volt , 50 Hzs, 63 Amps, 10 KA , Senstivity 100mA series with earth fault indicator complete all as specified and directed by Engineer-in-Charge. Make : Hager, Cat Part No AD975Y / Havells, Cat Part No DHCEACSN2030025 / Legrand, Cat Part No 411394 or equivalent makes mentioned in Appendix 'B'.

ITEM NO.268 : RCBOs for earth leakage, overload & short-circuit protection, Double Pole as incommer, EARTH LEAKAGE, OVERLOAD & SHORT- CIRCUIT PROTECTION220 volt , 50 Hzs, 40 Amps, 10 KA ,Senstivity 100mA series with earth fault indicator complete all as specified and directed by Engineer-in-Charge. Make : Hager, Cat Part No AD975Y / Havells, Cat Part No DHCEACSN2030025 / Legrand, Cat Part No 411394 or equivalent makes mentioned in Appendix 'B'.

ITEM NO.269 : RCBOs for earth leakage, overload & short-circuit protection, Double Pole as incommer, 220 volt , 50 Hzs, 32 Amps, 10 KA ,Senstivity 100mA series EARTH LEAKAGE, OVERLOAD & SHORT- CIRCUIT PROTECTION complete all as specified and directed by Engineer-in-Charge. Make : Hager, Cat Part No AE990Y / Havells, Cat Part No DHCEACSN2100040 / Legrand, Cat Part No 411334 or equivalent makes mentioned in Appendix 'B'.

ITEM NO.270 : MCB SP, 220volt , 50 Hzs, 6 to 40 A, 10 KA , "C" series complete all as specified and directed by Engineer-in-Charge. Make : Hager, Cat Part No NCN106N, NCN110N, NCN116N, NCN120N, NCN125N, NCN132N / Indo Asian, Cat Part No 811122, 811124, 811126, 811127, 811128, 811129 / Havells, Cat Part No DHMGCSPF006032 or equivalent makes mentioned in Appendix 'B'.

ITEM NO.271 : Hanging ceiling fan after repair / painting in any model/size etc and making all connection using three core copper conductor flexible cable in size 1.5 sqmm including drawn through PVC flexible conduit pipe from ceiling rose to fan connector complete all as specified and directed by Engineer-in-Charge.

ITEM NO.272 : Fixing exhaust fan after repair in any model/size etc and making all connection using three core copper conductor flexible cable in size 1.5 sqmm including drawn through PVC flexible conduit pipe from ceiling rose to fan connector complete all as specified and directed.

ITEM NO.273 : Exhaust fan 300mm sweep 230/240V, 50Hz, AC single phase and making all connection using three core copper conductor flexible cable in size 1.5 sqmm including drawn through PVC flexible conduit pipe from ceiling rose to fan connector complete all as specified and directed by Engineer-in-Charge.

ITEM NO.274 : Ceiling fan complete with electronic type regulator and accessories 230 V, 50 Hz, 1200 mm sweep conforming to IS-374-2019, (five star rating ) complete all as specified and directed by Engineer-in-Charge.

ITEM NO.275 : Refixing water heater any type and any size/capacity with and including all accessories such as nut bolt washers , PVC pipe etc with making all connection using three core copper conductor flexible cable drawn through in PVC flexible conduit pipe including painting with two coats of super enameled paint of existing shed complete all as specified and directed by Engineer-in-Charge.

ITEM NO.276: Water heater storage type electric of capacity 25 Ltr having five star rating suitable for 230V,50Hz single phase AC supply complete all as specified and directed.

ITEM NO.277: 3 Phase Energy Meter Board - Incomer 125A FP 25KA MCCB TMD based with adjustable O/L & fixed S/C protection-01 No, spreader-01 Set, ROM-01 No, Outgoing-63A 4P MCB, 10KA, C-CURVE -04 Nos, 3 phase direct type digital energy meter, 10-60A-04 Nos complete all as specified and directed. Notes:- (i) Enclosure shall be made of 2mm CRCA sheet for load bearing members & 1.6mm for non load bearing members. , (ii) Copper busbar will be used wherever required with colour coded heat shrinkable PVC sleeve & support . (CURRENT DENSITY: 1.6A/ Sqmm) (iii) Panel board will be partially type tested. (iv) Panel board will be painted with powder coating after seven tank pretreatment process . (v) All internal wiring will be done with PVC insulated copper wire ( FRLS type ) (vi) This Panel board will be wall mounted , single front , double door , fixed type , compartmentalized for indoor application . (vii) Degree of protection IP : 42. (viii) All the panels shall be suitable for safe area application only ( Non flame proof ) .

ITEM NO.278: One Phase Energy Meter Board - Incomer 100A FP 25KA MCCB TMD based with adjustable o/l & fixed s/c protection-01 No, spreader-01 Set,ROM-01 No,Outgoing-40A 4P MCB, 10KA, C-CURVE -04 Nos,3 phase direct type digital energy meter, 10-60A-04 Nos complete all as specified and directed. Notes:- (i) Enclosure made from 2mm CRCA sheet for load bearing members & 1.6mm for non load bearing members. (ii) Copper busbar will be used wherever required with colour coded heat shrinkable pvc sleeve & support . (Current Density: 1.6A/ Sqmm) (iii) Panel board will be partially type tested. (iv) Panel board will be painted with powder coating after seven tank pretreatment process . (v) All internal wiring will be done with PVC insulated copper wire ( FRLS type ) (vi) This panel will be wall mounted , single front , double door , fixed type , compartmentalized for indoor application . (vii) Degree of protection IP : 42. (viii) All the panels shall be suitable for safe area application only ( NON FLAME PROOF ) .

ITEM NO.279 : Temper proof AC three phase static electronic energy meter , Accuracy class 1, 230 volts with bakelite LCD display of rating 10 to 60 Amps, cupboard with suitable size hinge type locking arrangement made out by Transparent engineering plastic complete all as specified and directed by Engineer-in-Charge. Make : L&T , Cat Part No. WM301BC7D10 or equivalent in Bentex / Legrand / HPL

ITEM NO.280 : Temper proof AC Single phase static electronic energy meter , Accuracy class 1, 230 volts with bakelite LCD display of rating 5 to 30 Amps, cupboard with suitable size hinge type locking arrangement made out by Transparent engineering plastic complete all as specified and directed by Engineer-in-Charge. Make : L&T , Cat Part No. WM101VC5DDHBOX or equivalent inBentex / Legrand / HPL

ITEM NO.281 : Sub main wiring with four runs of 10 Sqmm for phase and neutral, 1100 volts grade single core FRLSH PVC insulated unsheathed multistranded copper conductor ,drawn through and including non-metalic PVC rigid conduit ISI marked with all conduit accessories conceiled in surface of walls/floors / ceiling etc with 1x10 sqmm single core FRLSH PVC insulated unsheathed with one copper conductor as earth wire complete and including cutting/chasing of wall complete all as specified and directed by Engineer-in-Charge. Note:-5 runs of 10 Sqmm cable and one run of conduit will be measured together as one unit length

ITEM NO.282 : Sub-main wiring with 2 single core FRLSH PVC insulated and unsheathed cable with stranded copper conductor of 6 Sq mm drawing in & including heavy grade FRLSH PVC Concealed conduit ISI marked of suitable size ith all accessories on walls and making good of disturbed surfaces including all conduit fittings, clamps, gutties etc and one additional 1 run of wire of 6 Sq mm but green in colour for earth DBs and boxes with proper thimbles complete and including cutting/chasing of wall complete all as specified and directed by Engineer-in-Charge. Note:- 3 runs of 6 sqmm submain wiring and Conduit will be measured together as one unit length

ITEM NO.283 : XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cables (heavy duty) stranded aluminium conductor including cable glands, cable lugs etc , to suit the cable size, 1100 volt grade, ISI marked, laid in trenches or fixing along the poles or passing through the pipes or laid under floors or through walls/ducts etc. complete all as specified and directed by Engineer-in-Charge of following cross sectional area :- NOTE: Excavation, earth work, sand cushioning, cable cover & pipe for cable protection will be measured and paid for separately.

(a) Cross sectional area 35 sq. mm, 3.5 core

(b) Cross sectional area 25 sq. mm, 4 core

(c) Cross sectional area 06 sq. mm, 2 core

ITEM NO.284 : Rigid non-metallic PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks of external dia size 20 mm , including cutting/chasing of wall complete all as specified and directed by Engineer-in-Charge.

ITEM NO.285 : Junction box of size 300x250x150mm, made out of 2.0mm thick MS sheet, having front openable and lockable hinged shutter with self closing arrangmenet, outdoor type weather and vermin proof completed duly painted with two coats of silver enameled paint over a coat of red oxide primer, comprising with insulated aluminium bus bar 04 Nos single phase 230 Volts of size 20x3 mm mounted on porcelain based insulators, having arrangement of connecting incoming and outgoing cables in and including MCB SP 'C' curve 06 Amp, 240 Volts, 10 KA mounted on Din rail, thimbles etc. with suitable size of cable glands and MS clamps, nuts, bolts and washers complete all as specified and directed by Engineer-in-Charge.

ITEM NO.286 : Earthing complete with and including galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm surrounded by a mixture of charcoal and salt in alternate layers burried directly in ground vertically in a pit of depth not less than 2.25 m deep below ground level with top edge of earth plate at a depth of not less than 1.5 m below ground level, connected with and including galvanised iron or steel earth wire, 4mm dia (No. 8 SWG) by means bolts, nuts, check nuts and washers made out of galvanised iron, 15 mm bore GI pipe (light grade) for protection of earthing lead, 20 mm bore (medium grade) GI pipe for watering with funnel, wire mesh and including necessary excavation and earth work, PCC 1:2:4 type B-1 in pit base and 50 mm thick RCC 1:2:4 type B-1, reinforced with XPM (weight not less than 3 kg/sq m) pit cover, C.I frame, charcoal and comman salt filling in alternate layers, all as shown in electrical plate No. 3 of SSR Part-I (2009) incl taking out existing earting material complete all as specified and directed by Engineer-in-Charge. Note : The unit rate includes for protecton pipe 15mm and GI earth wire 4mm from top of earth plate upto 7.50 metre above ground level.

ITEM NO.287 : PVC conduit 15mm dia with 1 run of 1.5 Sqmm copper wire drawn through including cutting and chasing in wall and accessories such as bend, T, socket etc for invertor circuit complete all as specified and directed by Engineer-in-Charge.

ITEM NO.288 : Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exeeding 1.5 metre in depth for laying of pipes in trenches and getting out inlcuding dressing/trimming sides and levelling, gradeing and ramming of bottom or excavation, complete all as specified and directed by Engineer-in-Charge.

ITEM NO.289 : Surface excavation n. exc 30cm deep and averaging 15cm deep in soft/loose soil & getting out including clearing all grass vegetation, saplings, shrubs, brush woods under growth roots and trees, and compacting of earth with hand roller or as directed complete all as specified .

ITEM NO.290 : Returning, filling in, including spreading, levelling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each, excavated soil in trenches after pipes have been laid and tested, complete all as specified and directed by Engineer-in-Charge.

ITEM NO.291 : Removing excavated surplus soil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified.

ITEM NO.292 : Removing excavated soil exc 1.50 km but not exc 5km and depositing where directed by Engr-in-Charge

ITEM NO.293 : Dry sand cushioning to under ground cable in trenches including spreading,levelling and hand punning complete all as specified and directed. Note:-Punned thickness of sand shall be considered for the purpose shall be considered.

ITEM NO.294 : Supply and laying comman burnt bricks sub class 'B' old size Desig 100, laid at right angle along the cable complete all as specifed and directed.

ITEM NO.295 : Dismantling of RCC posts or struts (wood, steel or RCC) in any section, in fencing, including taking out embedded portion and making good disturbed ground complete all as specified and as directed by the Engr-in-charge. (Note: Post embedded in natural ground).

ITEM NO.296 : All as per item No 295 hereinbefore, but posts embedded in concrete, brick masonry etc. complete all as specified and as directed by Engr-in-charge.

TEM NO.297 : Dismantling existing fencing wire mesh, of any description/type and removal from site complete all as specified

ITEM NO.298 : Dismentling existing barbed wire fencing of any description and removal from site complete all as specified. Note:Each line of wire will be measured seperately.

ITEM NO.299 : Dismantling expanded metal, weight n.exc 4 Kg per sqm, any thickness or mesh, fixed with steel or wood fillets, complete all as specified and as directed.

ITEM NO.300 : Mild steel angles iron post & struts in fencing including cutting top to shape as directed, drilling holes, notching for wire incl all necessary drilling bolts or revating & similar work confirming to Fe- 410-0 or Fe 310-0 complete all as specified and as directed.

ITEM NO. 301 : Mild steel Chimney bars (straight or camber);(10mm round Bars) bearing bars; tongues or water bars for window frames; window guard bars, plain let in and fixed independently in steel frames L or T section support for shelves etc., and similar articles conforming to Fe-290 Gde E-165 complete all as specified and as directed.

ITEM NO.302 : Supply only chain link mild steel galvanished fencing any size or type complete all as specified and as directed.

ITEM NO.303 : Fixing only chain link fencing including line wires any mesh any size and type to any type of standards, rails straining bolt etc including provn of binding wire complete all as specified and as directed. Note :- Chain link fencing shall be paid as supply only vide item No 302. above.

ITEM NO.304 : Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc.complete all as specified and as directed. Note:-Each line wire to be measured

ITEM NO. 305 : Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 10 cm long & 5 to 12mm dia complete all as specified and as directed .

ITEM NO.306 : Brick work with sub class 'B' bricks, class designation 100, old size bricks straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6) including corbellings etc, raking out joints internally and also externally (above G.L.) for plastering complete all as specified and directed by Engineer-in-Charge.

ITEM NO.307 : All as per serial item No.306 here-in-before but except bricks complete all as specified and directed by Engineer-in-Charge. Note:- Old bricks as obtained from demolition will be used in this item as approved.

ITEM NO.308 : 15mm thick rendering in cement mortar 1:4 on brick/ concrete surface finished even and fair with out using extra cement complete all as specified & directed.

ITEM NO.309 : Prepration of old plastered surfaces of walls and apply one coat of cement base paint complete all as specified & directed.

ITEM NO.310 : Preparation of old steel surfacse & apply one coat of synthetic enamel paint over 10 cm in width or girth as in mild steel fencing posts, steel gates etc complete all as specified and directed.

ITEM NO.311 : Preparation of new or previously untreated steel and iron surfaces of any description n exc10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

ITEM NO.312 : Granite stone 15-18mm thick (of any type) work (table rubbed and polished) for wall lining (veneering to wall) over and including 15mm thick rendering in cement (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified & directed.

ITEM NO.313 : Steel water tubing, galvanised, medium grade, ISI marked, 50 mm bore with and including all fittings , cutting, threading and fixed to walls and ceilings or laid in floors/ trenches including taking out existing complete all as specified and directed by Engineer-in-Charge.

ITEM NO. 314 : Steel water tubing, galvanised, medium grade, ISI marked, 25 mm bore with and including all fittings , cutting, threading and fixed to walls and ceilings or laid in floors/ trenches including taking out existing complete all as specified and directed by Engineer-in-Charge.

ITEM NO.315 : Steel water tubing, galvanised, medium grade, ISI marked,20 mm bore with and including all fittings , cutting, threading and fixed to walls and ceilings or laid in floors/ trenches including taking out existing complete all as specified and directed by Engineer-in-Charge.

ITEM NO.316 : Gun-metal , globe or gate valves, suitable for 50mm dia. pipe , with iron wheel head, screwed both ends for iron pipe including taking down existing complete all as specified and directed.

ITEM NO.317 : Gun-metal , globe or gate valves, suitable for 25mm dia. pipe , with iron wheel head, screwed both ends for iron pipe including taking down existing complete all as specified and directed.

ITEM NO. 318 : Gun-metal , globe or gate valves, suitable for 20mm dia. pipe , with iron wheel head, screwed both ends for iron pipe including taking down existing complete all as specified and directed.

ITEM NO.319 : MCB TP, 440 volt , 50 Hzs, 63 A, 10 KA , "C" series complete all as specified and directed by Engineer-in-Charge.

Schedule of Credit (Minus)

Total of Schedule 'A' Rs.

TARSEM CHAND AND CO.

Standard Const. Co.

SKYLARK INDUSTRIES