REPAIR MAINT OF HIGH MAST, SECURITY LIGHT , FLOOD LIGHT WITH CONNECTED WORKS OF WEST AREA UNDER GE (WEST) BAREILLY.

Taking out existing unserviceable Street Light fitting / Flood Light fitting / High bay light fitting of any wattage from poles/high mast, including taking down of high mast fitting and dismantling the complete fittings of checking out the defects, trace out damage/ unserviceable parts like driver, wire, led lamp etc and clean thoroughly the complete set and re-fixing in its original position after replacing defective parts including testing complete all as specified and as directed by Engr-in-Charge. Notes:- (a) Spares shall be measured & paid separately as given here-in-after. (b) Contractor shall provide minimum 1 Electrician and 1 helper to carry out the repair / Maint work of security lights in day shift (900 Hrs-1700 Hrs) and they have to report AGE E/M yard for daily assingment/task (c) Contractor shall provide all tools and plants and minor spares such as Ladder, nuts & bolts, jumper wire, insulation tape etc required for doing the job related with electric supply including mobile phones for communication and will be fully responsible for safety and security of their man. ( d) In case non reporting of required staff in AGE E/M yard the recovery shall be made @ Rs 500/= per day .

Supply only of Electronic Driver with Input Voltage 220 to 240 Volt and Output Voltage suitable for LED Light Fitting, complete all as specified and directed for the following types and capacities:-

All as Per Srl Item No 2 above but for 30 Watt to 50 Watt Street Light Luminaire

All as Per Srl Item No 2 above but for 60 Watt to 72 Watt Street Light Luminaire

All as Per Srl Item No 2 above but for 90 Watt and above Street Light Luminaire

All as Per Srl Item No 2 above but for 50 Watt to 80 Watt Flood Light Luminaire

All as Per Srl Item No 2 above but for 100 Watt to 150 Watt Flood Light Luminaire

All as Per Srl Item No 2 above but for 200 Watt Flood Light Luminaire

Supply only of PCB Card suitable for Multi LED Light Fitting complete all as specified and as directed.

All as Per Srl Item No 9 above but for 30 Watt to 50 Watt Street Light Luminaire

All as Per Srl Item No 9 above but for 60 Watt to 72 Watt Street Light Luminaire

All as Per Srl Item No 9 above but for90 Watt and above Street Light Luminaire

All as Per Srl Item No 9 above but for50 Watt to 80 Watt Flood Light Luminaire

All as Per Srl Item No 9 above but for 100 Watt to 150 Watt Flood Light Luminaire

All as Per Srl Item No 9 above but for 200 Watt Flood Light Luminaire

Supply Only of Surge Protection Device of capacity 10 KV Single Phase 50 Hz complete all as specified and as directed.

S&F for replacement PVC insulated unarmoured & PVC sheathed copper cable 3 core of cross sectional area 1.5 Sq mm for providing necessary electrical connection from street light junction box to light fittings drawn through existing Steel tubular pole with necessary arrangement of welding/cutting etc including with suitable size copper lugs complete all as specified and directed.

Supply and fix in repairs LED Street Light fitting, of various capacity as mentioned under, in high pressure die cast aluminium housing with lens and toughened sealed glass cover with integrated constant current electronic driver, incl taking down existing fitting complete all as specified and directed and complying with the following specifications:-. (a) minimum efficacy 120 lumen/watt (b) CRI not less than 80, (c) THD < 10% (d) Power Factor not less than 0.95 (e) Having in built short circuit and surge protection upto 5 kV (f) Colour temperature not less than 5700 degree K (g) Life not less than 50000 hours of operation (h) Weather protection grade: IP66 NOTE: (1) Contractor shall ensure that luminaire provided comply with the aforesaid specifications. No claim shall be entertained during currency of work.. (2) Wire for electric connection shall be measured and paid separately)

All as Per Srl Item No 18 above but for 45 Watt Street Light Luminaire. Make : Eveready Cat Pt No : LEDSL045I5-04 HE/Bajaj Cat Pt No. ENXT P 54L CR PC SD/Orient Cat Pt No : LSFS-045-C-UHL

All as Per Srl Item No 18 above but for 60 Watt Street Light Luminaire. Make : Eveready Cat Pt No : LEDSL060I5-04 HE/Bajaj Cat Pt No. ENXT P 72L WH CR PC SD/Orient Cat Pt No : LSFS-060-C-UHL

All as Per Srl Item No 18 above but for 70/72 Watt Street Light Luminaire. Make : Eveready Cat Pt No : LEDSL072I5-04 HE/Bajaj Cat Pt No. ENXT P 84L WH CR PC SD/Orient Cat Pt No : LSFS-070-C-UHL

All as Per Srl Item No 18 above but for 90 Watt Street Light Luminaire. Make : Eveready Cat Pt No : LEDSL090I5-04 HE/Bajaj Cat Pt No. ZELA P 108L WH PO TG SD/Orient Cat Pt No : LSFS-090-C-UHL

Supply and fix in repairs LED Flood Light fitting, of various capacity as mentioned under, in high pressure die cast aluminium housing with lens and toughened glass cover with integrated constant current electronic driver, incl taking down existing fitting complete all as specified and directed and complying with the following specifications:-. (a) minimum efficacy 120 lumen/watt (b) CRI not less than 70, (c) THD < 10% (d) Power factor not less than 0.95 (e) Having in built short circuit and surge protection upto 5 kV (f) Colour temperature not less than 5700 degree K (g) Life not less than 50000 hours of operation (h) Weather protection grade: IP66 (NOTE: (1) Contractor shall ensure that luminaire provided comply with the aforesaid specifications. No claim shall be entertained during currency of work.. (2) Wire for electric connection shall be measured and paid separately)

All as Per Srl Item No 23 above but for 100 Watt Flood Light Luminaire. Make : Eveready Cat Pt No : LEDFL100I5-04 HE/Bajaj Cat Pt No. PRAZE F 120L WH NB-A5 TG SD/Orient Cat Pt No : LFSMP-100-C-UHL

All as Per Srl Item No 23 above but for 150 Watt Flood Light Luminaire. Make : Eveready Cat Pt No : LEDFL150I5-04 HE/Bajaj Cat Pt No. PRAZE F 180L SXWH NB-A5 TG SD/Orient Cat Pt No : LFSMP-150-C-UHL

All as Per Srl Item No 23 above but for 200 Watt Flood Light Luminaire. Make : Eveready Cat Pt No : LEDFL200I5-04 HE/Bajaj Cat Pt No. PRAZE F 240L WH NB-A5 TG SD/Orient Cat Pt No : LFSMP-200-C-UHL

All as Per Srl Item No 23 above but for 400 Watt Flood Light Luminaire. Make : Eveready Cat Pt No : LEDFL400I5-03 HPC/Bajaj Cat Pt No. PRAZE F 480L WH NB-A5 TG SD/Orient Cat Pt No : LFSMP-400-C-UHL

S&F in repair LED post top luminiare, 40 watt, with die cast amuninium spigot, spun aluminium powder coated top cover, with high power LED, IP 65 grade protection, designed with indirect symmetrical light distribution, with integrated constant current electronic driver incl taking down existing luminaire complete all as specified an directed. Make : EVEREADY Cat Pt No : LEDPOST040I5-02 / BAJAJ Cat Pt No : BGCTNP 40W LED WH / CROMPTON Cat Pt No : CBP-610-4057-SL-CA-NBK NOTE: Wire for conection of luminaire shall be measured and paid seperately.

S&F in repairs LED Bollard light 9/10 watt, with aluminium extrusion for sturdiness and better finish, UV stabilized injection moulded opal polycarbonate diffuser for spot free lighting and IP 65 grade protection, operating voltage 120-280V, with integrated constant current electronic driver incl all fittings and fixtures complete with PCC work incl taking down existing luminaire complete all as specified and directed. Make : EVEREADY Cat Pt No : LEDBLB010I5-01 / BAJAJ Cat Pt No : BGBOL 605 9W LED WH/CROMPTON Cat Pt No : LBLA1-10-CDL

S&F in repair loop-in-loop out box of size 30x20x20cm made out from 2mm thick CRCA sheet, weather proof, dust and vermin proof with hinged door and locking arrangements with slanting cover on top and provision of 4 Nos aluminium bus bar of size 25mm x 2mm-4 Nos fixed on insulator and one MCB of capacity 6 Amps complete fixed on pole with and including suitable size MS flat iron clamps, nuts,bolts & washers etc complete all as specified and directed

Supply and fixing street light bracket made out of GI pipe light grade 32/40 mm dia of length upto 1.2 mtr bent to shape required with and including 2 Nos, 50 x 6 mm MS flat iron clamps with nuts, bolts, washer etc and applying one coat of aluminium paint to clamps including dismantling of old brackets complete all as specified and directed.

M&L for replacement of Galvanised Steel Tubing Pipe 40mm bore, light grade, length 0.60 mtr having 50 Cm with long PVC Bends (02 Nos) for Incoming and Outgoing Cables, grouting in Cement Concrete, complete all as specified and as directed. NOTE : Cement Concrete will be measured and paid for separately under appropriate Item.

Supply, fixing, commisioning and testing of Nature timer switch control Street Lights complete with MCB, Power and Panel duly complete with wiring single phase, max load 05 KW complete all as specified and directed.

Supply, fixing, commisioning and testing of Nature timer switch control Street Lights complete with MCB, Power and Panel duly complete with wiring three phase, max load 12KW complete all as specified and directed.

S&F in repair 1100 Volts grade heavy duty cable, flat or circular PVC insulated aluminium solid conductor of following sizes served with inner sheathing of PVC tapes and overall PVC sheathed in service connection from pole to Main Switch complete all as specified and directed.

All as Per Srl Item No 35 above but for 4 sqmm twin core

All as Per Srl Item No 35 above but for 6 sqmm twin core

All as Per Srl Item No 35 above but for 10 sqmm twin core

S&F in repairs of MCCB 4 Pole, 415 V, 100 Amps with adjustable type, breaking capacity 25 KA, Ics=100% of Icu with all accessories incl taking down existing MCCB complete all as specified and directed

S&F in repairs of MCCB 4 Pole, 415 V, 63 Amps with adjustable type, breaking capacity 25 KA, Ics=100% of Icu with all accessories incl taking down existing MCCB complete all as specified and directed

M&L in repairs of of MCB, TPN, 40 Amp, C - Curve 415 Volts, 50 Hz, including taking down old Unserviceable MCB, TPN Complete all as specified and directed.

M&L in repairs of of MCB, TPN, 63 Amp, C - Curve 415 Volts, 50 Hz, including taking down old Unserviceable MCB, TPN Complete all as specified and directed.

M&L in repairs of of MCB, SP, 6-32 Amp, C - Curve, 240 Volts, 50 Hz, including taking down old Unserviceable MCB Complete all as specified and directed.

Excavation in trenches n. exc. 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of underground cable and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in excavated soil in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removing of excavated soil to a distance not exceeding 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M&L Local sand dry, filling in trenches around under ground cable complete all as specified and directed.

M&L for providing of new sub class 'B' Bricks, old size, well burnt laid flat dry for protection of under ground cable complete all as specified and directed.

Laying only old bricks complete all as specified and directed.

S&F in replacement GI pipe light grade for cable protection, fixed to pole/ alongwall/ floor/ under road/ across the drain or nallaha etc of following sizes complete all as specified & directed.

All as Per Srl Item No 50 above but for 40 mm bore

All as Per Srl Item No 54 above but for 50 mm bore.

Taking out old unserviceable LT Cable any type and size from trenches or fixed on poles or through pipes/walls/laid under roads/paths/ drains/culverts complete all as specified and directed.

Supply, laying, jointing and testing XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable, heavy duty, conforming to IS - 7098 Part I -1988 with aluminum conductor 1100 Volts of following sizes / grade laid in ducts or on walls, in trenches encased in GI pipe fixed to walls / laid under roads / drains / paths / culverts etc complete all as specified and directed.

All as Per Srl Item No 54 above but for 25 Sqmm 4 core

All as Per Srl Item No 54 above but for 16 Sqmm 4 core

All as Per Srl Item No 54 above but for 10 Sqmm 4 core

All as Per Srl Item No 54 above but for 10 Sqmm 2 core

Relaying only serviceable LT UG Cable obtained from Srl item No 54 of any size and discription including necessary cable lugs. Note :- All relevent items like excavation, earth work etc shall be paid and measured seperately.

Dismantling of broken/dislodged pre-stressed concrete poles/steel tubular poles, of any description including earthwork for removal of concrete foundation, removal of unserviceable poles from site, complete all as specified and directed.

Supply and erection, in truly vertical position, LT Steel tubular swaged pole complete with cast iron base plate finial taper plug, bolt, nut and screwed type 410 SP-31 (9 Meter long) Class -10 including painting of poles with two coats of synthatic enamel paint in black and white strips upto 1.5 mtr height from coping over a coat of red oxide primer including numbering of poles as directed by Engineer in charge. Note : PCC, Earth work and MS work as cross arms clamps etc will be measured and paid separately.

Material and labour for PCC 1:4:8 type D-2 , using stone aggregate 40mm graded as in foundation for electric poles and making of cable duct including necessary form work where required and fair finish to the exposed surfaces all as specified & directed.

Material and labour for PCC 1:3:6 type C-2, using stone aggregate 40mm graded as in coping of poles and making of cable duct including necessary form work where required and fair finish to the exposed surfaces all as specified & directed.

S&F in repairs Contactor 40 Amp, 3 module, 2 NO+2NC, Type 1, DIN mounting type suitable for street light operation complete all as specified and directed.

M&L for replacement of Pole Mounted Junction Box 205 x 255 x 112mm, having insulated and made out of thermoplastic Polycarbonate with glass fibre reinforced, rated for Degree of Ingress Protection IP 66 in accordance with IEC 60529, IK 07, weather proof for outdoor installation (with knockouts for cable entry) having Gasket Material shall be Polyurethane and the Gasket shall be internally embedded, Tested at 650°C, with Plastic Mounting Bracket, Din Rail, Mild Steel Flat Iron Clamp, Nuts, Bolts and Washers, with MCB SP 6 Amps, 'B' Curve, 10 KA, incl 5 Nos terminal for termination of cable with necessary thimble/lugs complete all as specified and as directed.

M & L fabrication of MS busbar chamber of nominal dimension 900 mm x 600 mm x 300 mm duly provided with aluminimum busbar of size 50 mm x 6mm fixed on porcelain insulators TPN type out door weather/vermin proof with both way open ing duly provided with neoprene rubber gasket along the doors openings pedestal type duly painted powder coated on CRCA steel sheet encloser with one No incommer MCCB 250 Amp 35 KA complete all as sepcified and directed incl making connection /thimbles etc complete.

All as per srl item No 66 above here-in-before but of size 600 mm x 600 mm x 300 mm and without MCCB and bus bar rating 400 amp

Supply, fixing, testing and commissioning in repairs of heat shrinkable type straight through jointing kit suitable for LT cable of size 10 Sqmm to 16 Sqmm, 4 core, XLPE insulated, PVC sheathed armoured 1100 volts grade complete all as specified and directed.

Supply, fixing, testing and commissioning in repairs of heat shrinkable type straight through jointing kit suitable for LT cable of size 25 Sqmm to 35 Sqmm, 3.5/4 core, XLPE insulated, PVC sheathed armoured 1100 volts grade complete all as specified and directed.

M&L for cleaning and preparation of old painted surface of LT steel tubular pole complete and painting with one coat of aluminium paint including Channels / brackets, street light brackets, cross arms and making Black/Red/Yellow & white strips with synthetic enamelled paint of 30cm height, each alternative strip upto 1.5 mtr height and writing pole numbers with yellow synthetic enamelled paint after making circular base with black synthetic enamelled paint and applying two coat of white wash on PCC coping complete all as specified and directed by Engr-in-charge.

M&L for earthing complete with galvanised or steel earth plate electrode of size 60cm x60cmx6mm thick burried directly in ground vertically (to a depth not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI wire 4mm dia with nuts, bolts, check nuts, washers, earth plate surrounded by packed layers of charcoal dust and common salt 15cm thick all around, top & bottom watering pipe 20mm bore of GI medium grade with funnel and wiremesh all as shown in electrical plate No. 5 of SSR -1991 Part I and connecting to earthing test point, main switch board and testing on completion including PCC chamber concrete 1:3:6 type C-2 and RCC cover 75mm thick with MS TMT bar 8mm dia @ 150mm c/c both ways in cement concrete (1:2:4) type B-1 all as shown in electrical plate in No 5 of SSR(Pt-I)1991 complete all as specified and dirfected by Engineer-in-charge.

Dismantling of foundation/PCC coping of existing damaged steel tubular/RCC pole of any size and desciption, removing the all debris from site complete all as specified and directed. Note : Exacavation/RFR/Removal will be measured and paid for separately under appropriate Item.

Taking out of interlocking paver block, any shape or size and Re-laying the same after removing all vegetation, algae, grass etc, laid to proper slope & gradient over sand cushioning complete all as specified and directed. NOTE : Sand, if required for connection of cushioning level will be measured and paid seperately.

Supply and Laying of Machine pressed precast concrete interlocking paver block with grey cement and pigment of any shape and size as approved by GE conforming to IS-15658-2006 of 80 mm thickness, M-35 grade with 6 mm top layer of coloured rubberised anti abrasive material including dismantling of existing paver blocks complete all as specified and directed.

Notes:- Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender.

Please Enable Macros to View BoQ information