Repair and maintenance of Ramkanali OP under Katras Area

Item desription

Removing old terfelting

Providing water proofing treatment of terrace polyuthrene membrane

12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand)

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge.

25 mm thick cc flooring 1;2;4

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 30 mm thick

1 mm MS Sheet window

Providing AC sheet

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar

Flyash brick work in S & S 1:6

Providing and fixing factory made uPVC door frame made of uPVC extruded sectionshaving ano veral ldimensionas below (tolerance ± 1mm), withwall thickness 2.0 mm (± 0.2mm),corners of the door frame to be Jointed with galvanized bracket sand stainless steel screws, jointsmitred andPlasticwelded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19X19 mm and 1mm (±0.1mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge Extruded section profile size 48x40 mm

24 mm thick factory made PVC door shutters made of styles and rail sofa uPVC hollow section of size 59x24 mm and wall thickness 2mm (±0.2mm) within builted ging on both sides. The styles and rails mitred and jointat the corners by means of M.S. galvanised / plastic brackets of size75x220 mm having wall thickness 1.0 mm and s tainless steel screws. The styles of the shutter reinforcedby inserting galvanised M.S. tube of size 20x20mm and 1mm (±0.1mm) wall thickness.The lockrail made up of 'H' section ,auPVC hollow section of size 100x24mm and 2mm (±0.2mm) wall thickness, fixed to the shutter styles by means of plastic /galvanised M.S. 'U' cleats.The shutter frame filled with a uPVC multi-c hambered single panel of size not less than 620mm, having over all thickness of2 0 mm and 1mm (±0.1mm) wall thickness. the panel s filled vertically and tie barattwo places by inserting horizontally 6mm galvanised M.S. rod and fastened with nut sand washers, complete as per manufacturer's specificationand direction of Engineer in-charge. (For W.C. and bathroom door shutter)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Finishing walls with water proofing cement paint of required shade :Old work (one or more coats @ 2.20 kg/10 sqm) complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade :Old work (one or more coats)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Total impact of GST for the purpose of CTC

Please Enable Macros to View BoQ information