Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.2 LAccepted-AOC | L1 | Accepted-AOC Being 1st Lowest | |
| 2 | L2₹30.8 L+₹2.3 L (8.15%)Rejected-Finance | L2 | Rejected-Finance Being 2nd Lowest | |
| 3 | L3₹31.8 L+₹3.3 L (11.7%)Rejected-Finance 578 AVAS VIKAS JANAKPURI B IZATNAGAR BAREILLY 243122 UP | BAREILLY | UTTAR PRADESH | 243122 | L3 | Rejected-Finance Being 3rd Lowest | |
| 4 | L4₹35.3 L+₹6.8 L (23.9%)Rejected-Finance | L4 | Rejected-Finance Being 4th Lowest | |
| 5 | L5₹35.6 L+₹7.1 L (24.7%)Rejected-Finance | L5 | Rejected-Finance Being 5th Lowest |
Tender Value
₹49.4 L
EMD Value
₹98,800
Closing Date
16 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE EAST BAREILLY
Garrison Engineer East Military Engineer Services Shahjahanpur Road Bareilly Cantt
SPL REPAIR TO BLDG NO. P-166 AND 167 PERSONAL COOK HOUSE AND DINING HALL OF 406 FD HOSP AND OTHER LBW, REV, MINOR WORK UNDER GE (EAST) BAREILLY.
2023_MES_619420_1
8301/E8
Open Tender
Civil Works
Item Rate
245 days
BAREILLY
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE EAST BAREILLY
₹98,800
Yes
23 Nov 2023
18 Sept 2023
18 Oct 2023
18 Sept 2023
16 Oct 2023
2 Oct 2023
18 Sept 2023 - 25 Sept 2023
Amount
Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc complete all as specified and directed.
Demolition of Concrete is ground floors andy pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.
Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) removing from site complete all as specified and directed.
Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) removing from site complete all as specified and directed.
Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed.
Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, complete all as specified and directed.
M&L surface excavation n.exc. 30 cm deep and averaging 15 deep and getting out in soft /loose soil including clearing away all grass vegetation, saplings,shrubs,brushwood, undergrowth, roots,and trees not exc 30 cm girth and removing rubbish outside of defence land complete all as specified and directed.
Surface dressing n exc 15 cm deep complete all as specified and directed.
Excacvation in trenches not exc 1.5 mtr wide and n exc 1.5 mtr in depth for laying of electric cable or water pipe etc n exc 10 sqmm on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil ccomplete all as specified and directed.
Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.
Removing excavated material exc.250 m but n exc. 500 m and depositing where complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in fdn, floors etc complete all as specified and directed.
M&L RCC 1:2:4 type B-1 (Nominal Mix) (using 20mm graded stone aggregate) as in foundation footing, Plinth, lintel / roof beam complete all as specified and directed.
M&L RCC 1:2:4 type B-1 (Nominal Mix) (using 20mm graded stone aggregate) Columns, pillars, piers, Chajja,posts and struts complete all as specified and directed.
M&L for 75 mm PCC 1:4:8 type D-2(using 40 mm graded stone aggregate) as in floor complete all as specified and directed.
M & L 40 mm thick PCC (1:2:4) type B1(20 mm graded aggregate) as in floor rough finished to receive top layer complete all as specified and directed.
M&L for cement concrete type D2 (1:4:8) (using 40 mm graded stone aggregate) in foundations filling and mass concrete complete all as specified and directed.
Excavating in trenchs, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out Hard dense soil complete all as specified and directed.
M & L for PCC type A-1, 1:1.5:3, (using 20 mm graded stone aggregate) with 10% metallic hardner floor as in floor cement concrete work in pavement / hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metreand paving, finished the surface even and smooth without using extra cement, concrete surfaces finished fair even laid in bays n.exc. 2 m length & joints filled with aluminium strip of size 40mmx1.5 mm all as specified and directed. (Note:- Cost of Metallic floor hardner deemed to be included in quoted rate of item no extra is payble)
M&L 15mm thick rendering in cement mortar 1:4 to brick masonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even without using extra cement for fixing tiles etc complete all as specified and directed.
M & L 25 mm thick PCC 1:2:4 type B0, using 12.5mm graded aggregate as in floors to receive surface of tile complete all as specified and directed.
M&L in repairs for factory made machine pressesd coloured glazed chequered cement concrete tiles 25cm thick Glossy finish with mixture of grey and white cement in equal proportions and no pigment set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including screed bed or bedding layer of mortar 20 mm thick, in cement mortar (1:6), complete all as specified and directed.
M&L Machine cut pre- polished kota stone slab flooring 20-22 mm thick and size exc 0.16 sqm jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and treating the surface incl complete complete all as specified and directed
M&L for 20-25 mm thick Machine cut pre- polished kota stone slab as in riser and steps, skirting in full length in single peice without joint, with groove cutting in double line of stair width laid over cement screed and jointed with rubbing and treating the surface incl bull nosing complete all as specified and directed.
M&L 18-20 mm thick granite of black colour (tablee rubbed and polished) as in windows cill , in steps, jambs, pillars, cooking platforms and like in cement mortar (1:4) including form work , pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as spd as directed
M & L for 75mm thick PCC 1:3:6 , type C-2 using 40 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed .
M& L 100 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base floor / pavings complete all as specified and directed.
M&L factory made machine pressed pre-cast concrete interlocking coloured paver block, Glossy finish and shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment laid dry over and including 50 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed.
M&L for precast machine pressesd glazed rubber moulded PCC (1:2:4) type B0 using 12.5 mm graded aggregrate, including weathering, slightly rounded or chemferred angles and throating , as directed edges joint filling with in CM 1:4 complete including excavavtion for kerb stone complete all as specified and directed.
M&L for reinforced cement concrete 1:1.5:3 type A-1 (using 20mm graded stone aggregate) (nominal mix) as in slabs supported on wall,landing, balconies, shelves and like including bonding agent, complete all as specified (reinforcement to be measured & paid under respective items) complete all as specified and directed.
M&L for reinforced cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) (nominal mix) as in slabs supported on wall, landing, balconies, shelves and like including bonding agent, complete all as specified (reinforcement to be measured & paid under respective items).
M&L form work to chajja, weather shade, troughs and similar items including edges for rough finished surfaces of concrete flat, complete all as specified and directed.
M&L form work to edges of concrete flats, treads, breaks in floors window cill, concrete railing opening in conc wall , floor and roof n.exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n.exc 20cm wide for rough finished surfaces of concrete, complete all as specified and directed.
Supply and fix TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified and directed.
All as per Srl item No. 44 here in before but upto 8 mm dia as in stirrups , spacers and binders.
S&F form work to sides of concerte, foundation, footings base of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to butter complete all as specified and directed.
S&F Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
S&F Form work to sides and soffits of floor or roof beam, beam hings, girders bressume, lintles, contilevers, shelves including support over lungs etc also splays between floor and beams etc complete all as specified and directed.
M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as spd as directed.
M&L rendering 15 mm thick in CM 1:6 on brick masonary wall surfaces or on other than fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed.
M&L 15mm thick rendering in cement mortar 1:4 to on brick masonary wall surfaces or on other than fair faces of brick masonary fair finished without using extra cement complete all as specified and directed.
M&L rendering 5 mm thick in CM 1:3 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed.
Hard core broken brick gauge n exc 63mm, deposited spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L PCC 1:2:4 type B1 using 20mm traded stone aggregate as in Coping /benching including necessary form work and finishing all exposed surfaces of concrete complete all as specified and directed..
M&L Concrete bed to drain pipe in Cement concrete 1:3:6 type C-2 including packing under, and haunching against the sides ofpipes after they are laid and tested in complete all as specified and directed.
M&L 150 mm dia Reinforced concrte pipes, class NP2, laid and jointed complete with collars laid in trenches and jointes complete all as specified and directed.
M&L for plain cement concrete type B-1, 1:2:4(using 20mm graded aggregate) as in cover slab (for man hole etc.) all as spfd and directed.
M&L for applying cement slurry over existing roof surface @ 3 Kg/Sqm incl mix with water proofing liquid @ 0.15 ltr per 50 kg cement bags as per manufactures instructions complete all as specified and directed.
M &L for PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregrate laid over roof slab after applying cement slurry for filling undulationations finished even and smooth without using extra cement complete all as spd and directed.
M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:4, over RCC roof slabs for laying water proofing treatment mixed with using water proofing liquid @ 0.15 Ltr per bag of cement complete all as specified and directed. (Note : Cost of Water proofing liquid deemed to be included in qouted rates of items)
M&L Waterproofing Treatment and clean the surface. a)-Bonding Coat: Cleaning the surface with wire brush, water jet etc to remove dust, dirt etc. On clean surface applying a bonding coat of Asian paints Smartcare Multi Purpose Polymer mixed with cement (1:1.5) to reduce the existing surface porosity and as a bond coat for the new surface sceed on the top of the same. b)-Resurfacing : Applying and Laying a avg 15 mm thick layer of cementitious polymer modified mortar on the top of the bond coat as per manufacturer's instructions in existing gradient/ slope. Polymer will be added @ 8% to the weight of cement. Solid content of the polymer not less than 54%. The newly constructed surface to be cured with clean water at least for 10 days before applying WP membrane. c)-Surface Preparation: The surface to receive the treatment shall be thoroughly free of laitance, scales, oil or any other loose material. It should be made free of any sharp objects. Cleaning of screed shall be done with wire brushing to attain smooth levelled surface. Cracks shall be rectified, filled using dual shrinkage compensated Repair Mortar , Making of Coves/ vata at the junction / corners in using MPP polymer mixed with cement : sand as per manufacturer's instruction for mortar & water curing the same. after curing period of 72 hours proceed with application of Polyurethane coating. d)-Liquid Applied WP Membrane: Application of Asian Paints two component Epoxy Primer (Resin & Hardener) on the cleaned surface for bonding of Polyurethene with the existing concrete surface. 33 % water dilution is recommended with the pure mixed primer. The primer mixing ratio will be 1:3(Resin:Hardner). Epoxy primer will be done at consumption of 0.2Kg per sqmt.
S & F Pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.
S&F for 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .
S&F 35mm thick factory Glazed and skeleton shutters, open rebated of saal wood second class hard wood rail and stles and prepared to receive glass, gauze, etc. (without sash bars), divided into squared, with plain, cham-fered or rounded, mitred and rebated sash bars, any numbers sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. (Note :- S & F Glass/gauge shall be measured and paid for separately)
S & F 150 mm long floor door stopper of aluminium alloy body and tongue, brass body and tongue with hard drawn steel spring. Fixed in floor complete all as specified and directed.
S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet used instead of Plain colour PVC sheet, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F 30 mm thick factory made both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
M&L for repairing to existing aluminium doors of any size by straightening of frame / shutter, replacing the detoriated member with new, replacing the broken / non funcional hinges with new, replacing decayed rubber gasket with new, replacing the broken glass pane of any size with new 5.00mm thick tinted/ ordinary glass, replacing unserviceable handle, tower bolt, lock, floor spring, foundation box with governing pivot, top pivot, peg stay etc with new and including taking down and at same place after making the door / window smooth functional complete all as specified and directed.
S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5 mm thick aluminium composite panel LDPE core PET coating ( both side decorative type ) fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x44x1.48mm thick with rawl plug (b) Middle and lock rail : 150x44x1.48mm thick (c) Bottom rail : 150x44x1.48mm thick (d) Top rail/style : 85x44x1.48mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 200 mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver , with S S hinges complete (g) Making good of wall surface to match with existing surface complete.
S&F of Steel windows with pressed steel frame ( size 95x45x1.25mm) side hung shutter including box type hinges with steel handle, and steel peg steel complete with glazed openable shutter with glazing bar (open out side) and wire gauged openable shutter without glazing bar ( open in side) dovetailed or welded complete all as specified and directed and all as per Drg No TD/088 dt 07 jan 2002 Note:- (i) Two shutter ie wire gauged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit. (ii) Rate for filling of PCC in frame deemed to be included in quoted rate. (ii) MS grill shall be measured and paid seperatly under relevant item of schedule complete all as specified and directed.
S&F for steel ventilators fixed type, with glazing bars complete welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed.. (Note :- Glass shall be measured and paid for separately).
M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed.
S&F stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F mild steel window grills box type framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding complete FE-290 grade E-165 all as specified and directed.
S&F stainless steel wire fabric weight n. exc. 4kg/sqm to wood or steel members complete all as spd &directed (for vegetable/fruit/food rack) complete all as specified and directed.
S&F Framed work as in doors , gates & Stairs of angle or other section with gusset plates, rails, braces, etc., complete,drilled for fixing of steel sheeting or other covering to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and fastening and fixing FE 290 Gde E-165& painting of gate with synthetic enamel paint including dismatnling of old existing gate complete all as spd as directed.
S & F for aluminium powder coated frame hollow sections members of size 63.50 mm x38mmx 1.48 mm thick fixed with 3 mm thick aluminium composite panel into the wall for kithen cabinet/ cupboard shelf incl hanging self for clothes with aluminium clip/strips, pvc beadings fixed with adhesive on edging , design as per site requirements basis, complete all neccessary fitting all as specified and directed.
S&F Powder coated aluminium sliding windows /Kitchen cabinet shutter and frame with movable shutter ( sliding on minimum two PVC roller of best quality on two tracks Aluminium composite panel shutter fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :45.2x35mm X 1.15 mm thick for two tracks. (ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over.(iii) Aluminium beading - 0.7mm thick (v) Aluminium fittings such aluminium suitable handle with auto interlock cap with suitable size . (vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.
S&F Powder coated aluminium ventilators box type with louvers & wire mesh fixed with neoprene rubber gasket, aluminium beading, clips. Frame made with powder coated aluminium section of size as appended below (i) frame :45.2mm x35mm X 1.15 mm (ii) Aluminium beading - 0.7mm thick (iii) Glass louvers depth 6 inch. Blade Angle: 38 degrees and thickness of blade 2.02 mm with 106.25 mm spacing. (iv) Aluminium neccessary fittings complete as required basis. (v) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.
S & F 300 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed
ALL as per Srl item no. 93 here in before but 200 mm long Aluminium complete all as specified and directed.
S & F 150 mm thick Aluminium, anodised, barrel tower bolts of extruded section and fixed
S&F 150mm size aluminium handles, cast type anodised completed all as specified and directed.
S&F 100 mm size butt hinges medium weight stailess steel complete all as specified and directed.
S&F 300 mm size ordinary mild steel , rat tailed rod pattern spring including roller and roller plate welded to mild steel frame.fixed in repair complete all as spd & directed.
S&F 300 mm long aluminium sliding door bolts plate type with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed
ALL as per Srl item no. 93 here in before but 150 mm long aluminium sliding door bolts plate type complete all as specified and directed.
M&L for at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a down ward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.
M&L for treatment of soil under existing floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12mm dia hole complete all as specified and directed.
S&F rotational moulded polethylene water tank of 500 ltrs capacity, ISI Marked, white coloured (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system) hoisted and fixed in position all as pacific SSR Part- I including dismantling of existing water tanks capacity n exc 500 ltr complete all as specified and directed.
S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F GI tube 15 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 15 mm dia & connections complete all as specified and directed.
S&F GI tube 20 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 20 mm dia & connections complete all as specified and directed.
S&F in repairs vitreous chinaware coloured wash hand basin with pedestal of size 55X45X82cm complete including fancy CP pillar tap, CP Waste coupling, waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed.
S&F Brass chromium plated wall mixer 2 in 1, 15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and directed.
S&F 15 mm dia fancy type stop cock , chromium plated with long shank and cup (conncelaed type) for iron pipe or for unions and fixed complete all as specified and directed.
S&F fancy type 150mm size square brass CP shower rose complete all as specified and directed.Model No F 7010305 of Cera , Hindware Model No F160006 , Parryware Model No T9985
S&F fancy type 15mm dia chromium plated fancy type wall mixer hot & cold with long swan for kitchen sink fixing and connection to pipes complete all as directed.
S&F in repairs 15 mm dia bib tap fancy type chromium plated with flange quarter turn complete all as specified as directed.
S&F fancy type chromium plated brass two way bib cock suitable for 15mm bore pipe complete all as specified and directed. 2 Way Bib Cock with Wall Flange. Model: FUS 29041 Fusion of Jaquar ,Parryware model No G2381A1, Cera model No F1014161 ".
S&F in repair stainless steel of AE - SI 316 grade tubular towel ring including apair of CP brass bracket complete all as specified.
S&F in repair fancy type stainless steel towel rack size 600mm long including a pair of brass bracket complete all as specified and directed. Model No :- ACN -1181N of Jaquar ,Parryware Model No T6008A1, Cera Model No F5003102
S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.
S&F in repair fancy type brass chromium plated soap dish of 160x160x90 mm, complete all as specified and directed.
S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed.
S & F fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified and directed.
S&F in repairs of 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F in repair vitreous china squatting pan of orrissa pattern long pan size 580 x 440 mm white with "P"or "S" trap size 100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified and directed.
S&F in vitreous china wash down water closet pan (pedestal pattern) with 'P' or 'S' trap white, including connection to drain or out going pipe and flush pipe anti symphonize pipes etc complete all as specified and directed.
S & F Brass CP health faucet with 8mm Dia 1.0 Meter Long Flexible Tube and Wall Hook screwecd for iron pipe fancy type long body complete all as specified and directed. Model :ALD 573 of Jaquar, Hindware Model No F160002, Parryware Model No T9961A1"
S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed .
S&F in repair PVC (SWR) multifloor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed.
S&F PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed.
S&F PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed.
S&F PVC (SWR) 110mm bore bends any radius complete all as specified and directed.
S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.
S&F PVC (SWR) 75 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.
S&F PVC (SWR) 110 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.
S & F PTMT alloy toilet cabinet with mirror of overall size 350 x 450mm and fixed to wall complete all as specified and directed.
S&F in repairs Stainless Steel plate rack of size 90x80x25cm made with 1.00 mm thick sheet including taking out existing wooden plat rack, complete all as specified and directed.
S & F in repair 0.8 mm thick stainless steel kitchen sink size 590x460x230mm undermount, single bowl (bowl size 540x410x230 mm) , incl waste pipe & SS coupling, washers etc. complete all necessary fittings complete all as specified and directed.
S&F in repair 20 mm dia stainless steel 1.0 mm thick fancy type droppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate c/s in each end & intermediate support complete all as specified and as directed.
S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 complete all as specified and directed.
S&F Pre-coated galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.
M & L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, Chajja ( up to IInd floor) etc making good, cutting exc 10cm and not exc 20cm girth in brick walls complete all as specified and as directed.
Dismantling of concrete by chiseling from RCC members like column , beam, parapet facia, chajja, ceiling,etc exposingthe reinforcement without disturbing the reinforcement free from rust by sand blasting/using chemical , apply a coat of rustolin to remove rust and acralic polymer on old rusted reinforcement proving at places addl reinforcement welding with existing reinforcement as directed wherever required binding RCC 50 mmx50 mm (10 mm gauge welded mesh ) & tack , securing with clips / blinding wire, welding & provision guniting pressure 2.2 to 2.5 kg /sqm with admixer 1 cement 3.5 of sand of thickness 25 to 40 mm including stripping floating with wooden strippers for proper dimension control neccssary form work & scaffolding up to three storey and including height of head room complete surface of guniting to be finished fair with 10 mm thick plaster in cement mortar 1:4 with water proofing compound @3% by weight of cement and construction fibre as per manufacturer instruction cleaning & removing of waste meterial etc as dirply two coat of Water proofing liquid at interval of 8 hours cure for the surfaces complete all as specified and directed.
S&F for 0.71mm thick Aluminium plain sheeting Alloy 31000 H4, stucco embossed finish with fixed with coach screw and Aluminium washer in roof and wall etc. with end laps stitched with 25x6mm G.I. bolts at 20cm apart gap to be with thermocol sheet incl dismantled also complete all as specified and directed.
M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed.
M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed.
M&L for preparation of old painted wooden or wood based surfaces of any description n.exc 10 cm in width or girth when unconnected with other painting or when painted in a diferent tint and applying one coat of synthetic enamel paint over and including one coat of red oxide complete all as specified and directed.
M&L for complete removal of existing treatment on wall by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropirate grit to make surface clean,free from dust ,loose paint etc by skilled labour and applying of two coat OBD on wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over two coats of wall care putty of 1 mm thickness prepared and sanded with electrically operated sanding machine complete all as specified and directed. Application to be done through authorised dealer complete all as specified and directed.
M&L for applying of two coat OBD on newly plastered surface of wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over two coats of wall care putty of 1 mm thickness prepared and sanded with electrically operated sanding machine complete all as specified and directed. Application to be done through authorised dealer complete all as specified and directed.
M&L for preparation of newly plastered walls surfaces and applying two coats of cement base paint over a coat 1mm thick wall care putty complete all as specified and directed.
M&L for preparing newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.
M&L for complete removal of existing treatment on ceiling, etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of white wash complete all as specified and directed.
M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100 volts, drawn through & including concealed 20 mm rigid non metalic PVC conduit with all accessories fixed on wall/ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switches, switch sockets, sockets, regulators etc with 3 mm thick hylum laminated sheet cover including cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed for:- NOTE: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.
One light point / Fan point / Exhaust point / Bell point controlled by one 5A switch
One 5A flush type socket point on same board board
One 5A flush type switch socket point on independent board
All as per Srl item No.138 here in before but One 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for wiring and earth wire
S&F switch piano flush type single pole one way 5 Amps Complete all as specified & as directed.
S&F Switch Piano flush type single pole one way 15 Amps Complete all as specified & as directed.
S&F Socket outlet 2 in 1, 3 pin 5 Amp flush type.s Complete all as specified & as directed.
S&F socket outlet 2 in 1, 3 pin 5Amp and 15 Amps Complete all as specified & as directed.
S&F Lamp holder ( batten/angle ) PVC/Polycarbonate type with back plate for batten/angle fittings.Complete all as specified & as directed.
S & F Ceiling rose, PVC/polycarbonate insulated body type, 3 terminal, 240 volts, 5 Amps complete all as specified and directed.
S & F Lamp LED heat sink white with polycarbonate diffuser, B-22 base cap, retrofit type, 220/230 Volts,7/9 Wattcomplete all as specified and directed.
S & F in repairs LED light fittings 20 Watt ( T-8 ), 4' complete with retrofit tube including connecting up with 3 core flexible copper conductor cable of suitable size Complete all as specified & as directed.
S&F in repairs LED bulk head luminaire hexafit 10 watt LED environmental friendly, ultra modern, energy saving , surface mounted, decorative hexagonal bulk head back lit LED luminaries comprising of high brrightness LED complete all as specified & as directed.
S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required complete all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
S & F exhaust fan AC single phase, metallic body , heavy duty, 230/240 Volts, of size 300mm sweep with louvers including making suitable size hole in the wall for air flow and grouting of nuts & bolts and washers including making connection with three core copper cable of size not less than 1.5 sqmm from ceiling rose complete all as specified & directed.
S &F LED building security light fitting 25 Watt LED 230 Volts, AC outdoor type new generation with energy saving and environmental friendly long life made up of high pressure die cast aluminium housing with hight efficiency LED as lighting source and lens embedded and heat resistant polycarbonate cover having bottom opending seperate driver component with IP 66 protetection and impact resistant of IK07 complete all as specified and as directed.
S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 8 way, 240 Volt, double door single pole & neutral with 200 Amps rated bus bar complete all as specified and directed.
S&F in repairs MCB single phase and neutral 16A-63A, 230V 10KA. B' curve type complete all as specified and directed.
S&F in repairs MCB SP 6A-32A, 230V. 10KA. B' curve type complete all as specified and directed.
S & F in repairs GI bracket made out from GI pipe 25/32mm dia, 1.20 m long fixed on wall with and including nut, bolts and GI clamps of size 25x4mm as required & including painting etc complete all as specified and directed.
Supply and laying dry burnt bricks, sub class ‘B’ old size in cable trenches, as cable protection complete all as specified and directed.
M&L for Dry sand cushioning to under ground electric cable on layer of 08 cm thick before laying the cable and second layer of 15 cm thick after laying the cable all as specified in clause 19.75 of M.E.S Schedule Part-I complete all as specified and directed. (Note:- Only punned 18 CM thick sand cushioning shall be measured and paid)
Supply & fix tube 40mm bore light grade GI with all fittings for cable protection for road crossing/ culvert/ path/ on wall/ floor/ pole/ across the road/path/culverts or laid in floor complete all as specified and directed.
M&L for earthling complete with Galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directrly in ground (earth pit not less than 2.25 mtr deep blow GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15 cm thick packed layer of vharcoal dust and common salt filled in alternate layers and electrode connections by using Galvanised earth strip 32 x 6 connected by means of bolts, nuts, check nuts and washer of galvanized iron or steel, provision of 40 mm dia GI pipe light grade for protection of GL earth strip and 20 mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) type B1 chamber, MS funnel, wire mesh, 50 mm thick RCC 1:2:4 type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 Mtr, Provision of charcoal and slat complete all as shown in electrical plate No 3 of schedule SSR Part-I. Note : (i) Cost of GI earth strip and GI protection pipe upto 7.5 mtr length shall be deemed to be included in the rate quoted for this item. (ii) The unit rate shall also includes for Wire mesh, funnel, excavation, returning filling, removing, PCC chamber pit RCC cover, test point etc.
S&F spring 6 LED post top new generation IP 65 LED post top energy saving and environmental friendly long life aesthetically designed with good indirect symetrical light distribution , die cast aluminium landscape luminaries with high power COB LED as light source of 35W LED and suitable pole dia 75 mm complete all as specified and directed.
28. S & F in repairs GI bracket made out from GI pipe 25/32mm dia, 1.20 m long fixed on wall with and including nut, bolts and GI clamps of size 25x4mm as required & including painting etc complete all as specified and directed.
S&F uneco track mounted LED light with modern design, compact size with hight power COB LED to provide focussed light of 15 W LED complete all as specified and directed.
M & L in repairs for sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through in & including PVC conduit complete all as specified and directed.
M & L Boring of holes under road or cutting the road/ path/ pavement/ hard standing or any other situation by mannual means for 50/40/ 25mm bore GI pipe for crossing the cable and making good both the ends complete all as specified and directed. Note :- GI pipe shall be measured and paid separately under respective item.
Supply & fix tube 50 mm bore light grade GI with all fittings for cable protection for road crossing/ culvert/ path/ on wall/ floor/ pole/ across the road/path/culverts or laid in floor complete all as specified and directed.
S&f LED Bldg security light 30 W IP-65 complete and including electric connection with 3 core 1.0 sqmm PVC insulated copper conductor cable 1100 V grade complete all as specified and directed.
S&F MCB single phase and neutral 40-63 A, 240Volt B- curve complete all as specified and directed.
M & L for cutting existing steel tubing upto 50mm dia and inserting suitable GI fittings etc for alterations/addition the branch connection complete all as specified and directed.
Supply & laying GI pipe medium grade including fittings 25mm dia complete all as specified and directed.
Supply & laying GI pipe medium grade including fittings 20mm dia complete all as specified and directed.
Supply & fix gun metal gate valve with Iron wheel head, screwed both ends for pipe 25 mm dia complete all as specified and directed.
Supply & fix gun metal gate valve with Iron wheel head, screwed both ends for pipe 20 mm dia complete all as specified and directed.
Taking down copper/aluminum point wiring complete including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets, light fittings, holders etc and removing the items from site to store for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surfaces to match with the existing surfaces of walls, floors etc complete all as specified and directed.
Taking down main switch / MCB DBS including MCBS etc of any size and removing the items from site to store for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surfaces to match with the existing surfaces of wall, floors etc complete all as specified and directed.
S&F Lamp LED 7/9 Watt 230 Volt complete all as specified and directed.
S&F in repairs LED bulk head luminaire 9/10 watt with Engineering plastic housing and oval shaped with holder, clear prismatic diffuser,heat sink integrated including one no. 9/10 Watt LED lamp complete all as specified and directed.
S&F Ultra slim LED MS Batten light fitting 1X20Watt , powder coated decorative end cap complete with retrofit poly carbonate glass tube LED 20W, 4' long including suitable electric connection with three core flexible PVC insulated copper conductor(multistranded) cable of 1.0sqmm from ceiling rose to batten complete all as specified and directed.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
S & F exhaust fan AC single phase, metallic body , heavy duty, 230/240 Volts, of size 450 mm sweep with louvers including making suitable size hole in the wall for air flow and grouting of nuts & bolts and washers including making connection with three core copper cable of size not less than 1.5 sqmm from ceiling rose complete all as specified & directed.
S & F exhaust fan made out of sturdy engineering plastic complete with loubers shutter, voltage 230 Volts , 50 Hz, RPM 1200 , copper winding of sweep 300 M AC single phase, including making suitable size hole in the wall for air flow and grouting of nuts & bolts and washers including making connection with three core copper cable of size not less than 1.5 sqmm from ceiling rose complete all as specified & directed.
Taking down ceiling/exhaust fan and disconnecting and further Hanging only ceiling fan after cleaning & making functional by replacement of capacitor, loose connection etc. and rewinding if required, painting and remarking the serial MES fan nos etc complete including electric connection with three core flexible PVC insulated copper conductor multistranded white in clour 1.0sqmm cable (Item received form ser No 3 here in before) complete all as specified and as directed.
Taking down ceiling/exhaust fan and disconnecting and further Exhaust fan, cleaning all dust etc from surfaces of any size painting, minor repair, rewinding and remarking the serial MES fan nos etc complete including electric connection with three core flexible PVC insulated copper conductor multistranded cable 1.0 sqmm ( Item received from srl no-3 )
S& F in repairs round shape 10 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified & as approved by GE.
S & F GI bracket made out from GI pipe 32/25mm dia, 1.2 mtr long bend to shape including 02 Nos 25x4 mm MS clamps,nuts, bolts washers fixed on wall & including painting etccomplete all as specified and directed.
S&F sheet metal enclousers (DBS) when MCBs to be used 04 way double door single pole & neutral with 200 Amps rated bus bar complete all as specified and directed.
S&F sheet metal enclousers (DBS) when MCBs to be used TPN 4 way double door with 200 Amps rated bus bar complete all as specified and directed.
S&F in repairs MCB single phase and neutral 40-63A, 240Volt B- curve complete all as specified and directed.
S&F in repairs MCB 415V 10 kA 'B' curve miniature circuit breaker (MCB) TPN 100 Amps complete all as specified and directed.
S&F in repairs sub main wiring with 2 run FRLS PVC insulated and unsheathed multistranded copper condutor of nominal cross section area 4.0 sqmm alongwith one run of FRLS PVC insulated and unsheathed multistranded copper conductor of nominal cross secrtional area 4.0 sqmm as earth contuinity conductor drawn through in and including PVC condut complete all as specified and as directed.
S&F in repairs sub main wiring with 2 run FRLS PVC insulated and unsheathed multistranded copper condutor of nominal cross section area 6.0 sqmm alongwith one run of FRLS PVC insulated and unsheathed multistranded copper conductor of nominal cross secrtional area 6.0 sqmm as earth contuinity conductor drawn through in and including PVC condut complete all as specified and as directed.
Supply and lay cable XLPE insulated PVC armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor cross sectional area 16Sq mm 2 Core complete all as specified and directed.
Supply, Laying and testing cable XLPE insulated, screened, PVC bedded,GI steel strip or wire armoured, electric power cable ( heavy duty ), 1100Volts with stranded aluminium conductor of size 35 sqmm 4 core complete all as specified and directed.
M/S R S Constructions
UTTRAKHAND BUILDERS
M/S BABA ENTERPRISES
j u enterprises
Shikhar ji Enterprises
shiv shakti contractor
Mohit Enterprises
M/S YASHCON CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .