Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹14.6 LAdmitted-Finance | -20.30% | ₹14.6 L | L1 | Admitted-Finance |
| 2 | L2₹14.8 LAdmitted-Finance | -19.00% | ₹14.8 L | L2 | Admitted-Finance |
| 3 | L3₹15.5 LAdmitted-Finance | -15.45% | ₹15.5 L | L3 | Admitted-Finance |
| 4 | Not Admitted-Fee/PreQual/Technical | - | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| 5 | Not Admitted-Fee/PreQual/Technical | - | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹18.3 L
EMD Value
₹36,700
Closing Date
15 Apr 2026, 5:00 pmClosed
Sr Manager E/M-III
Noida Authority Office Sector 39 Noida
Providing 16 mtr high mast light and Beautification work for Ashoka Stambh at U-Flex Crossing in side of Sec-71, Noida
2026_NOIDA_1132475_1
23/GM(E/M)/SM(E and M)-III/2025-26
Open Tender
Electrical Works
60 days
Noida
Please refer to tender document
3 documents required · 3 mandatory
₹1,416
Noida
₹36,700
28 Apr 2026
2 Apr 2026
16 Apr 2026
2 Apr 2026
15 Apr 2026
2 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supply and Fixing of 16 Mtr High Mast pole of approved make with rising system, Hot dip galvanised inside & outside, having pole sheet thickness 3mm, top dia minimum 150 mm bottom dia miimum 360 mm base plate 32 m thick, suitable for wind velicity as per IS 875 part 3 & having no circumferential weld with accessories for High Mast such as heat frame suitable for 6 luminaries & its control gear boxes, 1.5 HP power tool motor, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufacturer drawing & site requirement along with foundation bolts, nuts, washer, Anchor plate etc. Complete in all respects as per direction and satisfaction to the Engineer-in-charge (PS No. 652) (MakeBajaj/Valmont/Transrail) | |||||
| 2Supply and fixing of Factory wired integral LED Flood Light Luminaires with die cast Aluminium housing build with driver set suitable for 170 to 200 watt. Confirming to IP66 and above protection. Complete in all respects. (PS No. 1455) CAT-AAA . (Make - LT/Bajaj/Havells/ Crompton/Philips/Wipro) | |||||
| 3Supplying and Laying of 6 sq. mm 2 core PVC Insulated Al. moued cable for street Light pole (as per RESPO-2018) annexure -3 pg. 17. | |||||
| 4Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000 mm, Outer pipe 50mm, inner pipe 25, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive and conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with food mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25x3 G.I. strip will be extra.) ps 725(A) | |||||
| 5Supply and fixing of 25 Amp TPN capacity of automatic street light cubical control panel painted with anti corrosive alkali and acid proof paint crossing of time switch TSO 100 series with contractors, HRC fuse, isolating swtich metering instrument & instrument box with CTs etc. in case of TPN, Complete in all respects. as per PS No. 807E | |||||
| 6Supplying and laying of aluminium conductor PVC insulated armoured, served, sheathed cable 1100 Volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. Clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respects. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. (KEI/ Havells/ Polycab make) (PS No 501) | |||||
| 6.1 | 16 Sq.mm. 4Core (PS No. 501) | - | Mtr | - | - |
| 6.2 | 10 Sq.mm. x 2 Core | - | Mtr | - | - |
| 6.3 | 70 sq mm 3.5 core (PS No 501) | - | Mtr. | - | - |
| 7S/F of Plain of pin type copper tin plated cable socket(lug) to the cable leads, insulating with tape and making connection etc. Complete in all respects as per direction for E/I (PS No. 504) | |||||
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.15 MB
BOQ_2113625.xls
BOQ • 0.32 MB
C.xls
Additional Documents • 0.05 MB
TD.pdf
Tender Documents • 1.30 MB
Download all tender documents and submit your bid
