CO Extension office at Garbage Dumping yard at Chand Pur in Ward No 10 Sunder nagar Distt Mandi HP

Amount

2nd class brick work using common burnt clay building bricks in foundation and plinths in cement mortar 1:6(1cement:6 sand)Square and rectangular pippars in superstructure above plinth level upto floor two level including all leads and lift including all type of carriage.

2nd class half brick work using common burnt clay building bricks in super structure above plinthnlevelupto floor two level in cement mortar 1:4(1cement:4 sand) including all leads and lift including all type of carriage.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30xx5mm so as to give a fair finish including cantering, shuttering and propping etc. with wooden battens and ballies, height of propping and centering bellow supporting floor to ceiling not exceeding 4 mtr. And removal of the same for insitu-re-inforced concrete & plain concrete work including all leads and lift including all type of carriage.: Beams, cantilever, girder and lintels,Sides and soffits of beams, beams haunchings, cantilevers, bressumers and lintels not exceeding 1 Mtr in depth in all heights from floor.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30xx5mm so as to give a fair finish including cantering, shuttering and propping etc. with wooden battens and ballies, height of propping and centering bellow supporting floor to ceiling not exceeding 4 mtr. And removal of the same for insitu-re-inforced concrete & plain concrete work including all leads and lift including all type of carriage: Flat surface such as soffits of suspended floor, roof, landings and like floors etc. up to 200 mm in thickness.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30xx5mm so as to give a fair finish including cantering, shuttering and propping etc. with wooden battens and ballies, height of propping and centering bellow supporting floor to ceiling not exceeding 4 mtr. And removal of the same for insitu-re-inforced concrete & plain concrete work including all leads and lift including all type of carriage.: Edges of slabs and breakes in floors and walls: Under 20 Cm wide.

Providing and laying mechanically mixed and vibrated cement concrete work1:2:4(1 cement:2sand:4graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in: suspended floors, roofs, landings and shelves and their supports, balconies, beams, girders, bressmers up to floor two levels including all leads and lift including all type of carriage(Crushed/broken stone aggregate to be used)

Providing milled steel/tor steel reinforcement for RCC work including winding bending and placing in position complete up to floor two level including all leads and lift including all type of carriage. tor steel

Providing wood work in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in Position including all leads and lift including all type of carriage.Sal wood

Providing and fixing paneled glazed shutters for doors windows and clerestory windows including black enamaelled iron butt hinges with necessary screws.40mm thick. 2nd class deodar wood

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of I.S. gauge designations 85G with wire of dia 0.56 mm for doors windows and clerestory windows including bright finished black enameled iron hinges with necessary screws including all leads and lift including all type of carriage. 40mm thick. 2n class deodar wood.

Providing 40x3mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts and nuts and wooden plugs and embedding in cement in cement concrete block 30x10x15cm 1:3:6(1cement:3 sand:6 graded stone aggregate 20mm nominal size) including all leads and lift including all type of carriage.

Providing and fixing Oxidised MS sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete.300x16mm

Providing and fixing M.S. bright finished nickel plated pull bolt lock with necessary screws etc. complete.

Providing and fixing anodized aluminum tower bolt anodized transparent or dyed to required shade and colour with screws etc. complete.250x10mm

Providing and fixing anodized aluminum tower bolt anodized transparent or dyed to required shade and colour with screws etc. complete.200x10mm

6mm cement plaster to ceiling in cement mortar 1:4( 1cement:4 sand) including all leads and lift , all heights including all type of carriage.

15mm cement plaster in two coats backing coat 10mm and finishing coat 5mm on fair side of brick/concrete/stone walls for interior plastering upto floors two level including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:4(1cement:4sand) including all leads and lift , all heights including all type of carriage.

Providing and laying ceramic tiles 5.5mm thick in flooring(300mmx300mmsize) treads of steps laid on a bed of 12mm thick cement mortar 1:3( 1 cement:3 sand) finished with flush pointing in white cement including all leads and lift including all type of carriage.

White glazed tiles in skirting risers of steps and dado 12mm thick cement mortar 1:3( 1 cement:3 sand) and jointed with cement slurry including all leads and lift including all type of carriage.

Applying Birla white wall care puttyover plaster surface after thoroughlybrushing the surface free from mortardrops, dust, loose materials and otherforeign matters sand papered smoothto give final matter finish to the surface complete including all leads and lift including all type of carriage.

Distempering (two coats)with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including primer coat of distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and smooth sand papered smooth .Priming coat with distemper primer including all leads and lift including all type of carriage.

Applying prmimg coat over new wood and wood base surface after and inculding preparing the surface by thoroughly cleaning oil, grease, dirt and other foreigen matter, sand papering and knotting.Ready mixed paint brushing with white lead for priming including all leads and lift including all type of carriage.

Painting two coats( excluding priming coat) on new wood and wood based surfaces with ready mixed paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter sand papering and stopping.With white ready mixed paint including all leads and lift including all type of carriage.

Steel work welded build up sections, trusses and framed work, including cutting, hosting fixing in position and applying a priming coat of red lead paint :in greetings, framed guard bars, ladders, railings ,brackets and similar works including all leads and lift including all type of carriage.

CHUNI LAL

KULDEEP SINGH