REPAIR MAINTENANCE OF CERTAIN WOODEN FURNITURE ITEMS AT AF STN KUMBHIRGRAM

Amount

Taking out unserviceable rail from chair writing and Supply and Fix new rail made of 2nd class hard wood with suitable holes for caning complete all as specified and as shown on drawing(s).

Taking out unserviceable front legs from chair writing and Supply and Fix new front leg made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unserviceable rear legs from chair writing and Supply and Fix new rear leg made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unserviceable stiffeners from chair writing and Supply and Fix new stiffeners made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unserviceable arm rest from chair writing and Supply and Fix new arm rest made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unserviceable back rest from chair writing and Supply and Fix new back rest made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Material and labour removal of old existing unserviceable cane from chair writing and recaning in Godrej Pattern with plastic cane Type-I (HDPE) conforming to IS: 5378-1994, 2mm to 2.5mm wide, white colour after completion of the repairing and polishing works as per the respective items in this BOQ, complete all as specified and directed. [Make: Arya/Ajay/Supreme]

Taking out unserviceable shoe from chair writing and Supply and Fix new PVC/hard rubber shoe complete all as specified and directed.

Material and labour for preparation of wooden surfaces of chair writing and polishing of repaired chair writing with two or more coats of French polish upto glossy finish, complete all as specified and directed. (Note:- Applicable for Serial item No 1.00 to 7.00 : Chair Writing : Refer Drawing No FD-250 / FD-280)

Taking out unserviceable rail from chair dining and Supply and Fix new rail made of 2nd class hard wood with suitable holes for caning complete all as specified and as shown on drawing(s).

Taking out unserviceable front legs from chair dining and Supply and Fix new front leg made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unserviceable rear legs from chair dining and Supply and Fix new rear leg made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unserviceable side/centre stiffeners from chair dining and Supply and Fix new stiffeners made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unserviceable back rest from chair dining and Supply and Fix new back rest made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unserviceable shoe from chair dining and Supply and Fix new PVC/hard rubber shoe approved quality complete all as specified and directed.

Material and labour removal of old existing unserviceable cane from chair dining and recaning in Godrej Pattern with plastic cane Type-I (HDPE) conforming to IS: 5378-1994, 2mm to 2.5mm wide, white colour after completion of the repairing and polishing works as per the respective items in this BOQ, complete all as specified and directed. [Make: Arya/Ajay/Supreme]

Material and labour for preparation of wooden surfaces of chair dining and polishing of repaired chair dining with two or more coats of French polish upto glossy finish, complete all as specified and directed. (Note:- Applicable for Serial item No 10.00 to 14.00 : Chair Dining : Refer Drawing No FD-279 & 228)

Taking out unserviceable rail/bead from chair easy and Supply and Fix new rail/bead made of 2nd class hard wood with suitable holes for caning complete all as specified and as shown on drawing(s).

Taking out unserviceable front legs from chair easy and Supply and Fix new front leg made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unserviceable rear legs from chair easy and Supply and Fix new rear leg made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unserviceable seat frame from chair easy and Supply and Fix new seat frame made of 2nd class hard wood of section 75mm x 40mm of size 510mm long in front and 480mm long in rear complete all as specified and as shown on drawing(s).

Taking out unserviceable back frame from chair easy and Supply and Fix new back frame made of 2nd class hard wood of section 75mm x 40mm of size 510mm long in front and 480mm long in rear complete all as specified and as shown on drawing(s).

Taking out unserviceable arm rest from chair easy and Supply and Fix new arm rest of size 65mm x 25mm x 610mm complete all as specified and as shown on drawing(s).

Material and labour removal of old existing unserviceable cane from chair easy and recaning (seat or back) in Godrej Pattern with plastic cane Type-I (HDPE) conforming to IS: 5378-1994, 2mm to 2.5mm wide, white colour after completion of the repairing and polishing works as per the respective items in this BOQ, complete all as specified and directed. [Make: Arya/Ajay/Supreme]

Taking out unserviceable shoe from chair easy and Supply and Fix new PVC/hard rubber shoe complete all as specified and directed.

Material and labour for preparation of wooden surfaces of chair easy and polishing of repaired chair easy with two or more coats of French polish upto glossy finish, complete all as specified and directed. (Note:- Applicable for Serial item No 18.00 to 23.00 : Chair Easy : Refer Drawing No FD-229)

Taking out unserviceable long rails from bed plywood top and Supply and Fix new long rails made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unserviceable ply wood teak face and Supply and Fix new 4mm thick, 3 No of ply, veneered decorative plywood, grade 1 (with BW resin) with decorative face veneers on one face, ISI Marked (IS: 1328) of size 780mm x 340mm on both side of head board rest complete all as specified and as shown on drawing(s).

All as per item No 28 here-in-before but size 780mm x 180mm on both side foot boards rest complete all as specified and as shown on drawing(s).

Taking out unserviceable plywood top from bed ply and Supply and Fix new 12mm thick, 7 No of ply, plywood grade BWR, type BB, ISI Marked (IS: 303) complete all as specified and as shown on drawing(s).

Taking out unserviceable bottom rails of bed plywood top and Supply and Fix new bottom rails made of 2nd class hard wood of required shape and size complete all as specified and as shown on drawing(s).

Taking out unserviceable legs from head board of bed plywood top and Supply and Fix new legs of head board made of 2nd class hard wood of required shape and size complete all as specified and as shown on drawing(s).

Taking out unserviceable legs from foot board of bed plywood top and Supply and Fix new legs of foot board made of 2nd class hard wood of required shape and size complete all as specified and as shown on drawing(s).

Taking out corner S&F new corner made out of MS flat Iron FI 25mm x 5mm, bend to shape required, 90 degree angle with suitable holes for fixing from the legs. Rails, fixed with screws and applying two coats of synthetic enemal paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Material and labour for preparation of wooden surfaces of bed ply top and polishing of repaired bed ply top with two or more coats of French polish upto glossy finish, complete all as specified and directed. (Note:- Applicable for Serial item No 27.00 to 33.00 : Bed Plywood Top : Refer Drawing No FD-246)

Taking out carefully old existing broken top of table dressing ladies and S&F of same with new 18/19 mm thick, Prelaminated particle board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS: 12823) with 4mm thick edging (with width equal to width of particle board) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish complete all as specified and as shown on drawing(s).

Taking out carefully old existing broken botom of table dressing ladies and S&F of same with new 18/19 mm thick, Prelaminated particle board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS: 12823) with 4mm thick edging (with width equal to width of particle board) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish complete all as specified and as shown on drawing(s).

Taking out old sliding glass shutter with aluminium sliding channel from table dressing ladies and S&F new glass shutter of size 550mm x 380mm with 5.0 thick, sheet glass, ordinary quality and aluminium anodised sliding channel complete all as specified and as shown on drawing(s).

Taking out old mirror from table dressing ladies and S&F new mirror of size 366mm x 1220mm x 5.0mm thick, completed all as specified and as shown on drawing(s).

Taking out back frame of mirror made out 2nd class hard wood alongwith 6mm thick commercial ply wood from table dressing ladies and S&F new back frame of size 45mm x 40mm made out of 2nd class hard wood, mirror frame and 6mm thick, 5 No of ply, plywood grade BWR, type BB, ISI Marked (IS: 303) complete all as specified and as shown on drawing(s).

Taking out old unserviceable drawer of table dressing ladies and S&F new drawer with brass chromium plated knob complete all as specified and as shown on drawing(s).

Taking out old unserviceable legs from table dressing ladies and S&F new legs made with 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out old unserviceable long rail of table dressing ladies and S&F new long rail made with 2nd class hard wood jointed to leg complete all as specified and as shown on drawing(s).

Taking out old unserviceable side / short rail of table dressing ladies and S&F new side / short rail made with 2nd class hard wood jointed to leg complete all as specified and as shown on drawing(s).

Taking out old unserviceable back ply wood of box from table dressing ladies and S&F new 6mm thick, plywood grade BWR, type BB, ISI Marked (IS: 303) complete all as specified and as shown on drawing(s).

Material and labour for preparation of wooden surfaces of table dressing ladies and polishing of table dressing ladies with two or more coats of French polish upto glossy finish, complete all as specified and directed. (Note:- Applicable for Serial item No 36.00 to 45.00 : Table Dressing Ladies : Refer drawing No FD-23(M) & FD-251)

Taking out carefully old existing broken top of table dressing gents and S&F of same with new 18/19 mm thick, Prelaminated particle board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS: 12823) with 4mm thick edging (with width equal to width of particle board) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish complete all as specified and as shown on drawing(s).

Taking out carefully old existing broken botom of table dressing gents and S&F of same with new 18/19 mm thick, Prelaminated particle board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS: 12823) with 4mm thick edging (with width equal to width of particle board) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish complete all as specified and as shown on drawing(s).

Taking out carefully old existing broken sides / partition of box of table dressing gents and S&F of same with new 18/19 mm thick, Prelaminated particle board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS: 12823) with 4mm thick edging (with width equal to width of particle board) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish completed all as specified and as shown on drawing(s).

Taking out old mirror from table dressing gents and S&F new mirror of size 380mm x 760mm x 5.0mm thick, completed all as specified and as shown on drawing(s).

Taking out old unserviceable back frame from table dressing gents and S&F new back frame of size 45mm x 40mm made out of 2nd class hard wood, mirror frame and 6mm thick, 5 No of ply, plywood grade BWR, type BB, ISI Marked (IS: 303) complete all as specified and as shown on drawing(s).

Taking out old unserviceable back ply from table dressing gents and S&F new back ply of size 900mm x 380mm with 6mm thick, plywood grade BWR, type BB, ISI Marked (IS: 303) complete all as specified and as shown on drawing(s).

Taking out old unserviceable drawer of table dressing gents and S&F new drawer with brass chromium plated knob complete all as specified and directed.

Taking out sagged and loose table dressing gents from wall and re-fixing / re-securing the same to wall with all accessories such as screw, clips, plugs, clamps, etc complete all as specified and directed.

Material and labour for preparation of wooden surfaces of table dressing gents and polishing of table dressing ladies with two or more coats of French polish upto glossy finish, complete all as specified and directed. (Note:- Applicable for Serial item No 47.00 to 53.00 : Table Dressing Gents : Refer Drawing No FD-230/31)

Taking out existing unserviceable top from table writing and S&F of new top made of 18/19 mm thick, Prelaminated particle board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS: 12823) with 4mm thick edging (with width equal to width of particle board) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish complete all as specified and as shown on drawing(s).

Taking out old unserviceable ply wood and chromium plated knobs from upper drawer of table writing and S&F new 6mm thick, 5 No of ply, plywood grade BWR, type BB, ISI Marked (IS: 303) and chromium plated knobs to the upper drawer complete all as specified and as shown on drawing(s).

Taking out old unserviceable long stiffner from table writing and S&F new stiffner made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out old unserviceable side stiffner from table writing and S&F new stiffner made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out old unserviceable cabinet of table writing and S&F new cabinet made of 18/19 mm thick, Prelaminated particle board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS: 12823) with 4mm thick edging (with width equal to width of particle board) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish complete all as specified and as shown on drawing(s).

Taking out old unserviceable shutter from table writing and S&F new shutter made of 18/19 mm thick, Prelaminated particle board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS: 12823) with 4mm thick edging (with width equal to width of particle board) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish complete all as specified and as shown on drawing(s).

Taking out unserviceable shoe from table writing and Supply and Fix new PVC/hard rubber shoe complete all as specified and directed.

Material and labour for preparation of wooden surfaces of table writing and polishing of table writing with two or more coats of French polish upto glossy finish, complete all as specified and directed. (Note:- Applicable for Serial item No 56.00 to 61.00 : Table Writing : Refer Drawing No FD-33/249/275)

Taking out unserviceable top from side board and S&F of new top made of 18/19 mm thick, Prelaminated particle board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS: 12823) with 4mm thick edging (with width equal to width of particle board) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish complete all as specified and as shown on drawing(s).

Taking out unserviceable sides / vertical partition from side board and S&F of new sides / partition made of 18/19 mm thick, Prelaminated particle board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS: 12823) with 4mm thick edging (with width equal to width of particle board) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish complete all as specified and as shown on drawing(s).

Taking out unserviceable back ply wood 6mm from side board and S&F new 6mm thick, 5 No of ply, plywood grade BWR, type BB, ISI Marked (IS: 303) complete all as specified and as shown on drawing(s).

Taking out unserviceable drawer ply wood from side board and S&F new 6mm thick, 5 No of ply, plywood grade BWR, type BB, ISI Marked (IS: 303) complete all as specified and as shown on drawing(s).

Taking out unserviceable knob from drawer of side board and S&F new brass chromium plated knob in drawer of side board complete all as specified and as shown on drawing(s).

Taking out unserviceable shutters (measured as single unit) from side board and S&F of new shutter made of 18/19 mm thick, Prelaminated particle board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS: 12823) with 4mm thick edging (with width equal to width of particle board) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish complete all as specified and as shown on drawing(s).

Taking out unserviceable bottom from side board and S&F of new bottom made of 18/19 mm thick, Prelaminated particle board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS: 12823) with 4mm thick edging (with width equal to width of particle board) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish complete all as specified and as shown on drawing(s).

Taking out unserviceable bottom frame and legs from side board and S&F new bottom frame and legs made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Material and labour for preparation of wooden surfaces of side board and polishing of table writing with two or more coats of French polish upto glossy finish, complete all as specified and directed. (Note:- Applicable for Serial item No 64.00 to 71.00 : Side Board : Refer Drawing No FD-241)

Taking out unserviceable top from teapoy wooden and S&F of new top made of 18/19 mm thick, Prelaminated particle board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS: 12823) with 4mm thick edging (with width equal to width of particle board) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish complete all as specified and as shown on drawing(s).

Taking out unserviceable legs from teapoy wooden and S&F new legs and legs made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unserviceable short rail from teapoy wooden and S&F new short rail and legs made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unserviceable bottom rail from teapoy wooden and S&F new bottom rail and legs made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unserviceable shoe from teapoy wooden and Supply and Fix new PVC/hard rubber shoe complete all as specified and directed.

Taking out unserviceable long rail from teapoy wooden and S&F new long rail and legs made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Material and labour for preparation of wooden surfaces of teapoy wooden and polishing of teapoy wooden with two or more coats of French polish upto glossy finish, complete all as specified and directed. (Note:- Applicable for Serial item No 73.00 to 78.00 : Teapoy Wooden : Refer Drawing No FD-278 & 382)

Taking out unserviceable top from table centre and S&F of new top made of 18/19 mm thick, Prelaminated particle board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS: 12823) with 4mm thick edging (with width equal to width of particle board) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish complete all as specified and as shown on drawing(s).

Taking out unserviceable legs from table centre and S&F new legs made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unserviceable stiffner from table centre and S&F new stiffner made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unserviceable shoe from table centre and Supply and Fix new PVC/hard rubber shoe complete all as specified and directed.

Material and labour for preparation of wooden surfaces of table centre and polishing of table centre with two or more coats of French polish upto glossy finish, complete all as specified and directed. (Note:- Applicable for Serial item No 80.00 to 82.00 : Table Centre : Refer drawing No FD-274 & 235)

Taking out unserviceable top from table dining 8 person and S&F of new top of table dining 8 person of size 1800 x 900 x 18/19 mm thick, Prelaminated particle board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS: 12823) with 4mm thick edging (with width equal to width of particle board) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish complete all as specified and as shown on drawing(s).

Taking out unserviceable top from table dining 6 person and S&F of new top of table dining 6 person of size 1500 x 900 x 18/19 mm thick, Prelaminated particle board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS: 12823) with 4mm thick edging (with width equal to width of particle board) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish complete all as specified and as shown on drawing(s).

Taking out unserviceable stiffner from table dining 6/8 person and S&F new stiffner made of 2nd class hard wood 25mm thick and 100mm wide complete all as specified and as shown on drawing(s).

Taking out unserviceable corner from table dining 6/8 person and S&F new corner made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unserviceable shoe from table dining 6/8 person and Supply and Fix new PVC/hard rubber shoe complete all as specified and directed.

Material and labour for preparation of wooden surfaces of table dining 6/8 person and polishing of repaired table dining with two or more coats of French polish upto glossy finish, complete all as specified and directed. [Note:- Applicable for Serial item No 85.00 to 88.00 : Table Dining 6/8 Person : Refer Drawing No FD-273, 30 (M)]

Taking out unserviceable back ply book case and S&F new 6mm thick, 5 No of ply, plywood grade BWR, type BB, ISI Marked (IS: 303) complete all as specified and as shown on drawing(s).

Taking out unserviceable sides / vertical partition from book case and S&F of new sides / partition made of 18/19 mm thick Prelaminated particle board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS: 12823) with 4mm thick edging (with width equal to width of particle board) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish complete all as specified and as shown on drawing(s).

Taking out unserviceable top / bottom from book case and S&F of new top / bottom made of 18/19 mm thick Prelaminated particle board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS: 12823) with 4mm thick edging (with width equal to width of particle board) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish complete all as specified and as shown on drawing(s).

Taking out unserviceable long horizontal shelf from book case and S&F of new long horizontal shelf made of 18/19 mm thick Prelaminated particle board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS: 12823) with 4mm thick edging (with width equal to width of particle board) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish complete all as specified and as shown on drawing(s).

Taking out unserviceable doors and knob from book case and S&F of new doors and knob made of 18/19 mm thick Prelaminated particle board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS: 12823) with 4mm thick edging (with width equal to width of particle board) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish complete all as specified and as shown on drawing(s).

Taking out unserviceable legs from book case and S&F new legs made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Material and labour for preparation of wooden surfaces of book case and polishing of repaired book case with two or more coats of French polish upto glossy finish, complete all as specified and directed. (Note:- Applicable for Serial item No 91.00 to 96.00 : Book Case : Refer Drawing No FD-45 & FD-237)

Taking out unserviceable top from table bed side and S&F of new top made of 18/19 mm thick Prelaminated particle board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS: 12823) with 4mm thick edging (with width equal to width of particle board) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish complete all as specified and as shown on drawing(s).

Taking out unserviceable sides from table bed side and S&F of new sides made of 18/19 mm thick Prelaminated particle board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS: 12823) with 4mm thick edging (with width equal to width of particle board) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish complete all as specified and as shown on drawing(s).

Taking out unserviceable bottom from table bed side and S&F of new bottom made of 18/19 mm thick Prelaminated particle board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS: 12823) with 4mm thick edging (with width equal to width of particle board) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish complete all as specified and as shown on drawing(s).

Taking out unserviceable shelf from table bed side and S&F of new shelf made of 18/19 mm thick Prelaminated particle board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS: 12823) with 4mm thick edging (with width equal to width of particle board) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish complete all as specified and as shown on drawing(s).

Taking out unserviceable back ply from table bed side and S&F new 6mm thick, 5 No of ply, plywood grade BWR, type BB, ISI Marked (IS: 303) complete all as specified and as shown on drawing(s).

Taking out unserviceable legs from table bed side and S&F new legs made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Material and labour for preparation of wooden surfaces of table bed side and polishing of repaired table bed side with two or more coats of French polish upto glossy finish, complete all as specified and directed. (Note:- Applicable for Serial item No 98.00 to 103.00 : Table Bed Side : Refer Drawing No FD-248, 276)

Taking out unserviceable sutter from locker bed side (one shutter measured as single unit) and S&F of new shutter made out of 18/19 mm thick, 11 No of ply, plywood grade BWR, type BB, ISI Marked (IS: 303), hung with 2 Nos of MS butt hinges, medium 75mm size, 1 No of 100mm aluminium anodised handle including 4mm thick teak wood beading all round the sutter, complete all as specified and as shown on drawing(s).

Taking out unserviceable back ply from locker bed side and S&F new back made of 6mm thick, 5 No of ply, plywood grade BWR, type BB, ISI Marked (IS: 303), fixed with screws complete all as specified and as shown on drawing(s).

Taking out unserviceable Hapes and staple from locker bed side and S&F new Hapes and staple fixed with suitable size of screws complete all as specified and as shown on drawing(s).

Taking out unserviceable legs with bottom frame from locker bed side and S&F new legs and bottom frame made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Material and labour for preparation of wooden surfaces of locker bed side and polishing of repaired locker bed side with two or more coats of French polish upto glossy finish, complete all as specified and as directed. (Note:- Applicable for Serial item No 105.00 to 108.00 : Locker Bed Side : Refer Drawing No FD-54/222)

Taking out unserviceable top from table 3'x2' with/without drawer and S&F of new top of size 900 x 600 x 18/19 mm thick Prelaminated particle board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS: 12823) with 4mm thick edging (with width equal to width of particle board) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish complete all as specified and as shown on drawing(s).

Taking out unserviceable drawer from table 3'x2' with drawer and S&F new drawer made of 2nd class hard wood and 6mm thick, 5 No of ply, plywood grade BWR, type BB, ISI Marked (IS: 303), fixed with screws complete all as specified and as shown on drawing(s).

Taking out unserviceable stiffner from table 3'x2' with/without drawer and S&F new stiffner made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unserviceable shoe from table 3'x2' with/without drawer and Supply and Fix new PVC/hard rubber shoe complete all as specified and as directed.

Supply and Fix new MS flat in L shape 150mm long made of FI 30mm x 5mm thick with suitable holes to fix with legs and rails, applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and as directed.

Material and labour for preparation of wooden surfaces of table 3'x2' with/without drawer and polishing of repaired table 3'x2' with/without drawer with two or more coats of French polish upto glossy finish, complete all as specified and as directed.. (Note:- Applicable for Serial item No 110.00 to 113.00 : Table 3' x 2' With/Without Drawer : Refer Drawing No FD-283,284,55)

Taking out unserviceable top from table 3'x3' and S&F of new top of size 900 x 900 x 18/19 mm thick Prelaminated particle board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS: 12823) with 4mm thick edging (with width equal to width of particle board) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish complete all as specified and as shown on drawing(s).

Taking out unserviceable shoe from table 3'x3' and Supply and Fix new PVC/hard rubber shoe complete all as specified and as directed.

Taking out unserviceable corner from table 3'x3' and S&F new corner 150mm (L) made of FI 30mm x 5mm MS flat in L shape with suitable holes to fixing with legs and rails, applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and as directed.

Material and labour for preparation of wooden surfaces of table 3'x3' and polishing of repaired table 3'x3' with two or more coats of French polish upto glossy finish, complete all as specified and as directed. (Note:- Applicable for Serial item No 116.00 : Table 3' x 3' (Wooden) : Refer Drawing No FD-291, 88)

Taking out unserviceable legs from sofa set 5/3 seater front or rear legs and S&F new legs made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unserviceable battens of seat and back from sofa set 5/3 seater and S&F new battens made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unserviceable side rails from sofa set 5/3 seater and S&F new rails made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Material and labour for preparation of wooden surfaces of sofa set 5/3 seaters and polishing of sofa set 5/3 seaters with two or more coats of French polish upto glossy finish, complete all as specified and as directed. (Note:- Applicable for Serial item No 120.00 to 122.00 : Sofa Set 5/3 Seater : Refer Drawing No FD-281)

Taking out unserviceable looking mirror from hat stand with mirror and S&F new mirror 5mm thick of approved quality duly fixed with well seasoned first class hard wood (Teak) beeding all around, complete all as specified and as shown on drawing(s).

Taking out unserviceable brass peg from hat stand with mirror and S&F new brass peg approved quality duly fixed with screw, complete all as specified and as shown on drawing(s).

Taking out unserviceable back side ply from hat stand with mirror and S&F new 4mm thick, 3 No of ply, plywood grade BWR, type BB, ISI Marked (IS: 303), fixed with head less nails, complete all as specified and as shown on drawing(s).

Taking out unserviceable front side Teak Face ply from hat stand with mirror and S&F new 4mm thick, 3 No of ply, veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, ISI Marked (IS: 1328), fixed with head less nails, complete all as specified and as shown on drawing(s).

Taking out unserviceable beading from hat stand with mirror and S&F new beading made of first class hard wood (Teak) of size 35mm x 6mm all round, complete all as specified and as shown on drawing(s).

Material and labour for preparation of wooden surfaces of hat stand with mirror and polishing of hat stand with mirror with two or more coats of French polish upto glossy finish, complete all as specified and as directed. (Note:- Applicable for Serial item No 124.00 to 128.00 : Hat Stand with Mirror : Refer Drawing No FD-233)

Taking out unserviceable top from peg table and S&F of new top made of 18/19 mm thick Prelaminated particle board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS: 12823) with 4mm thick edging (with width equal to width of particle board) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish complete all as specified and as shown on drawing(s).

Taking out unserviceable shoe from peg table and Supply and Fix new PVC/hard rubber shoe complete all as specified and as directed.

Material and labour for preparation of wooden surfaces of peg table and polishing of peg table with two or more coats of French polish upto glossy finish, complete all as specified and as directed. (Note:- Applicable for Serial item No 130.00 : Peg Table : Refer Drawing No FD-236 & 277)

Taking out unserviceable ply from seat of chair dining officers and S&F new 12mm thick, 7 No of ply, plywood grade BWR, type BB, ISI Marked (IS: 303), fixed with head less nails, complete all as specified and as shown on drawing(s).

Taking out unserviceable foam from chair dining officers and S&F new foam with fabric on seat of 75mm thick, 40 density, complete all as specified and as directed. [Make : Kurlon / Sleepwell / Dunlop]

Covers for foam as in item 134 above made out of tapestry cloth not less than Rs 240/- per meter as approved by AGE (I) perfectly fitting the foams and covering/uncovering the cushion, complete all as specified and as directed.

Taking out unserviceable shoe from chair dining officers and Supply and Fix new PVC/hard rubber shoe approved quality, complete all as specified and as directed.

Material and labour for preparation of wooden surfaces of chair dining officers and polishing of repaired dining officers with two or more coats of French polish upto glossy finish, complete all as specified and as directed. (Note:- Applicable for Serial item No 133.00 : Chair Dining Officers : Refer Drawing No FD/MAP-II/04)

Taking out unserviceable cushion foam from sofa set and S&F new cushion foam of 100mm thick, 40 density, complete all as specified and as directed. [Make : Kurlon / Sleepwell / Dunlop]

Covers for cushion as in item 138 above made out of tapestry cloth not less than Rs 240/- per meter as approved by AGE (I) perfectly fitting the cushions and duly fitted with zipper to secure the covering/uncovering the cushion, complete all as specified and as directed. (Note:- Applicable for Serial item No 138.00 : Cushion for Sofa Set : Refer Drawing No FD-229)

M/S SMRITI ENTERPRISE

M/S ANITA ROY and SONS