DMF

Demolishing and disposal of unserviceable materials within 100 metres lead. Unreinforced cement concrete

Filling with Stone dust in trenches, sides of foundations and basement in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and Cost and Conveyance of water to site and all operational, incidental, labour charges, etc, hire charges of T & P etc., complete for finished item of work. FOR FOOTINGS

Plain Cement Concrete (1:5:10) proportion Nominal mix for foundations using 40mm size SS-5 metal including cost and conveyance of all materials and curing charges, labour charges, machine mixing and laying concrete in foundations ramming etc complete for Bed Concrete

Flooring with vitrified tiles of Ist quality set over bse coat of CM(1:8) 12mm thick over CC bed already laid or RCC roof slab including neat cement slurry of honey like consistency spread at 3.30Kg per sqm & Jointed neatly with white cement paste to full depth mixed with mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete for finished item of work.

Providing skirting to internal walls to 15 cm height/risers of steps with soluble salt porcelain vitrified tiles length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like vertified tiles, cement, sand and water for finished item of work.

Ornamental plastering to Ceiling 12mm thick in CM (1:3) with dubara sponge finish ,mixing mortar, finishing, scaffolding, lift charges, including cutting of Grooves wherever necessary as directed by Engineer-in-charge, curing, etc., complete for finished item of work. -GROUND FLOOR

Supply & application of one coat water based cement primer of Interior Grade-1 and two coats of acrylic emulsion paint having VOC content less than 50grams/ litre for internal walls including cost and conveyance of all material to site incidental operational and all labour charges etc, complete.

Supply & application of one coat water based cement primer of Exterior Grade-2 and two coats of acrylic emulsion paint having VOC content less than 50grams/ litre for internal walls including cost and conveyance of all material to site incidental operational and all labour charges etc, complete.

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, including conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work

Supply and fixing of sal wood Door double shutter of size 1.20x 2.13 mt with frame made of well seasoned sal Wood scantlings of size 100 x 75mm and Flush door shutters, solid bond wood block board type with commercial ply on both faces.: 30 mmthick including fixers of 6 nos of 9" ' z" holdfasts, 300 mm long Aluminum aldrop-1 no, 250mm Aluminumtower bolt - 2No, 150mm Aluminum tower bolt - 2no, 125 long Aluminium butt hinges 6 No's, Aluminum fancy handles 150 mm -2nos with necessary screws complete.

Damp proof course 40mm thick with cement concrete (1:2:4 Nominal mix), using 12mm hard broken stone aggregate including cost of all materials, including using nessary adminnessary excluding conveyance charges of materials, including the cost of machinery, labour charges, fixing, placing in position, leveling, vibrating, curing etc. complete for finished item of work. (Using concrete mixer

Providing and fixing factory-made uPVC any colour sliding glazed windowupto 1.50 m in height dimensioncomprising of uPVC multi- chamberedframe with in- built roller trackand sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket/TPV, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension.

Supplying and fixing of Fixed Louvered Ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, The section for louvered ventilators should be of of 33 x 56 mm Box section paneled with 4 mm pinhead glass with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket . corner brackets made of CRCA with Zinc Phosphate. The frames to be fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6" pitch complete for finished item of work. Ventilators: Fixed louvers 2'-0" x 1'-0" (609.6x609.6mm)(Box section) outer frame section size of 33 x 56 mm

Painting to New wood work with two coats of ready mixed first quality synthetic enamel paint of approved brand and shade over primary coat of wood primer grade I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, , cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors (APSS No. 1201 &1208).

Supplying & fixing of Iron Doors and Windows Grills including labour charges for fabricating steel including cost of welding rods, power charges & fixing the grill in position etc complete

Supplying, fitting and placing HYSD bar reinforcement Fe-415, in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded including cost of Boindinb wifre etc complete