New Construction of Urban Haat at Deesa Dist : Banaskantha

NAME OF WORK :- NEW CONSTRUCTION OF URBAN HAAT AT DEESA , DIST -BANASKANTHA

Bill Of Quantity

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Excavation for foundation in sand, gravel, clay soft soils and murrum etc. including shoring, strutting dewatering as necessary and Rupees Five Hundred Eleven And Paise Eleven

disposing of the excavated stuff as directed.(A) Depth upto 3.0 M. and lead upto all lead. Only

Carting & carriage Loading - unloading of excavated earth up to 15 km to 25 km from out side campus with all lead & lift as per Rupees One Hundred Thirty Five And Paise Sixty

Directed Engineer in Charge Six Only

Providing and laying controlled cement concrete M.150 for curing complete excluding cost of formwork and reinforcement for

Rupees Three Thousand Nine Hundred Eleven

3 269 reinforced concrete work in Foundations, footings,Base of columns and Mass concrete. Cum ₹ 3,911.73 ₹1,052,255.37

And Paise Seventy Three Only

Providing and laying in position control cement concrete mix M-300 grade for reinforced cement concrete work , using cement content

as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if required

Rupees Five Thousand Three Hundred Fifty Nine

4 520 , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of concrete, improve workability as per direction Cum ₹ 5,359.61 ₹2,786,997.20

And Paise Sixty One Only

of engineer in charge and approved , rates includes all levels , heights as specified , excluding reinforcement : (A) Footing

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using cement content

as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of concrete, improve workability as per Rupees Eight Thousand Fifty And Paise Seven

5 108 direction of engineer in charge and approved , rates includes all levels , heights as specified , excluding reinforcement .rates for Cum ₹ 8,050.07 ₹869,407.56

centering, shuttering, formwork staging scaffolding work considering for Column FOR up to Plinth level

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using cement content

as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of concrete, improve workability as per Rupees Eight Thousand Eighty Nine And Paise

6 145 direction of engineer in charge and approved , rates includes all levels , heights as specified , excluding reinforcement .rates for Cum ₹ 8,089.99 ₹1,173,048.55

Ninety Nine Only

centering, shuttering, formwork staging scaffolding work considering for Column FOR Ground Floor

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using cement content

as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of concrete, improve workability as per Rupees Eight Thousand One Hundred Twenty

7 97 direction of engineer in charge and approved , rates includes all levels , heights as specified , excluding reinforcement .rates for Cum ₹ 8,129.92 ₹788,602.24

Nine And Paise Ninety Two Only

centering, shuttering, formwork staging scaffolding work considering for Column First Floor

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using cement content

as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of concrete, improve workability as per Rupees Eight Thousand One Hundred Sixty Nine

8 44 direction of engineer in charge and approved , rates includes all levels , heights as specified , excluding reinforcement .rates for Cum ₹ 8,169.84 ₹359,472.96

And Paise Eighty Four Only

centering, shuttering, formwork staging scaffolding work considering for Column for Second Floor

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using cement content

as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of concrete, improve workability as per Rupees Seven Thousand One Hundred Sixty Four

9 241 direction of engineer in charge and approved , rates includes all levels , heights as specified , excluding reinforcement .rates for Cum ₹ 7,164.94 ₹1,726,750.54

And Paise Ninety Four Only

centering, shuttering, formwork staging scaffolding work in Plinth Beam .

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using cement content

as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of concrete, improve workability as per Rupees Seven Thousand One Hundred Eighty

10 226 direction of engineer in charge and approved , rates includes all levels , heights as specified , excluding reinforcement .rates for Cum ₹ 7,185.14 ₹1,623,841.64

Five And Paise Fourteen Only

centering, shuttering, formwork staging scaffolding work considering for Floor beam for Ground Floor

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using cement content

as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of concrete, improve workability as per Rupees Seven Thousand Two Hundred Twenty

11 140 direction of engineer in charge and approved , rates includes all levels , heights as specified , excluding reinforcement .rates for Cum ₹ 7,224.84 ₹1,011,477.60

Four And Paise Eighty Four Only

centering, shuttering, formwork staging scaffolding work considering for Floor beam for First Floor

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using cement content

as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of concrete, improve workability as per Rupees Seven Thousand Two Hundred Sixty Four

12 22 direction of engineer in charge and approved , rates includes all levels , heights as specified , excluding reinforcement .rates for Cum ₹ 7,264.76 ₹159,824.72

And Paise Seventy Six Only

centering, shuttering, formwork staging scaffolding work considering for Floor beam for Second Floor

Providng & doing dry Rubble soiling works (width shall be taken as area of pcc +150 mm ) ,voids filled with stone chips and screened

with murrum including compaction with mechanical vibratory compactor , sprinkling of water required for compaction ,for substructure Rupees Eight Hundred Ninety Two And Paise

& superstructure as per IS:1597 ,part-1 in line and level etc complete. Rate to include all material ,labour ,tools & tackles,etc ,complete Eighty Four Only

as per Engineer in charge.

Providing and Laying controlled Cement Concrete M-200 and curing etc. Complete including the cost of form work but excluding the Rupees Five Thousand One Hundred Fifteen And

cost of reinforcement for R.C.C. work at Ground Floor (c) For Grad Slab Paise Eighty Four Only

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using cement content

as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of concrete, improve workability as per Rupees Seven Thousand Four Hundred Fifteen

15 167 direction of engineer in charge and approved , rates includes all levels , heights as specified , excluding reinforcement .rates for Cum ₹ 7,415.66 ₹1,238,415.22

And Paise Sixty Six Only

centering, shuttering, formwork staging scaffolding work considering for Ground Floor (c) For Floor Slabs

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using cement content

as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of concrete, improve workability as per Rupees Seven Thousand Four Hundred Fifty Five

16 182 direction of engineer in charge and approved , rates includes all levels , heights as specified , excluding reinforcement .rates for Cum ₹ 7,455.58 ₹1,356,915.56

And Paise Fifty Eight Only

centering, shuttering, formwork staging scaffolding work considering for First Floor (c) For Floor Slabs

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using cement content

as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of concrete, improve workability as per Rupees Seven Thousand Four Hundred Ninety

17 21 direction of engineer in charge and approved , rates includes all levels , heights as specified , excluding reinforcement .rates for Cum ₹ 7,495.51 ₹157,405.71

Five And Paise Fifty One Only

centering, shuttering, formwork staging scaffolding work considering for Second Floor(c) For floor Slabs

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using cement content

as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of concrete, improve workability as per Rupees Six Thousand Nine Hundred Eighty Two

direction of engineer in charge and approved , rates includes all levels , heights as specified , excluding reinforcement .rates for And Paise Sixty Five Only

centering, shuttering, formwork staging scaffolding work considering for Stair Case for basement to Ground Floor & GF TO FF

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using cement content

as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of concrete, improve workability as per Rupees Seven Thousand Twenty Two And Paise

direction of engineer in charge and approved , rates includes all levels , heights as specified , excluding reinforcement .rates for Fifty Eight Only

centering, shuttering, formwork staging scaffolding work considering for Stair Case for FF TO SF

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using cement content

as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of concrete, improve workability as per Rupees Eight Thousand One Hundred Twenty

20 34 direction of engineer in charge and approved , rates includes all levels , heights as specified , excluding reinforcement .rates for Cum ₹ 8,123.30 ₹276,192.20

Three And Paise Thirty Only

centering, shuttering, formwork staging scaffolding work considering for Lintel for GF

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using cement content

as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of concrete, improve workability as per Rupees Eight Thousand One Hundred Sixty Three

21 7 direction of engineer in charge and approved , rates includes all levels , heights as specified , excluding reinforcement .rates for Cum ₹ 8,163.23 ₹57,142.61

And Paise Twenty Three Only

centering, shuttering, formwork staging scaffolding work considering for Lintel for FIRST FLOOR

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using cement content

as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings, finishing, grouting if

required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of concrete, improve workability as per Rupees Eight Thousand Two Hundred Three And

22 3 direction of engineer in charge and approved , rates includes all levels , heights as specified , excluding reinforcement .rates for Cum ₹ 8,203.15 ₹24,609.45

Paise Fifteen Only

centering, shuttering, formwork staging scaffolding work considering for Lintel for SECOND FLOOR

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Providing and laying cement concrete 1:3:6 (1- Cement :3- Coarse sand : 6- Graded brick bat aggregate 40mm normal size) and curing

Rupees Three Thousand Seventeen And Paise

23 254 complete excluding cost of formwork in (A) Foundation and Plinth Cum ₹ 3,017.55 ₹766,457.70

Fifty Five Only

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two

Rupees Seventy Seven And Paise Twenty Eight

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 cm.

Rupees One Hundred Thirty Six And Paise Ninety

25 1681 in depth consolidating each disposited layer by ramming and watering. Cum ₹ 136.91 ₹230,145.71

Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete Rupees Four Hundred Forty Four And Paise

Seventy Five Only

Applying general insecticide pest control treatment to floors, cupboards etc including labour materials etc. complete. Using Imidacloprid

30.5 SCas Per IS 6313 part-II( (0.075% concentration by mass) is recommended 10.5ml chemical diluted with 5 liters of water ₹

27 2822 Sqm. Rupees Eighty And Paise Eighty Four Only ₹228,130.48

application 0.5 litre chemical /Sqm of surface is recommended as per I.S

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in

Rupees Four Thousand Two Hundred Fourteen

28 243 Cement Mortar 1:6. (1- Cement : 6 -fine sand)(B) Conventional Up to plinth Level Cum ₹ 4,214.32 ₹1,024,079.76

And Paise Thirty Two Only

Brickwork using common burnt Clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in superstructure above plinth

level upto floor two level (B) Conventional 1:6. (1- Cement : 6 -fine sand) GROUND FLOOR Rupees Four Thousand Four Hundred Ninety Six

And Paise Four Only

Brickwork using common burnt Clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in superstructure above plinth

Rupees Four Thousand Five Hundred Thirty Eight

30 198 level upto floor two level (B) Conventional 1:6. (1- Cement : 6 -fine sand) FIRST FLOOR Cum ₹ 4,538.16 ₹898,555.68

And Paise Sixteen Only

Brickwork using common burnt Clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in superstructure above plinth

level upto floor two level (B) Conventional 1:6. (1- Cement : 6 -fine sand) SECOND FLOOR Rupees Four Thousand Five Hundred Eighty And

Paise Twenty Seven Only

Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:5

Rupees Six Hundred Seventy Three And Paise

32 56 (1- Cement : 5 -coarse sand ) in superstructure above floor two level.(B) Conventional GROUND FLOOR Sqm ₹ 673.21 ₹37,699.76

Twenty One Only

Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:5

Rupees Six Hundred Seventy Nine And Paise Fifty

33 578 (1- Cement : 5 -coarse sand ) in superstructure above floor two level.(B) Conventional FIRST FLOOR Sqm ₹ 679.51 ₹392,756.78

Providing and fixing Chicken mesh jali at the junction of 2 different surfaces of different material component at the time of plastering to

Rupees Three Hundred Sixty Eight And Paise

34 387 prevent cracking in plaster surface as and where directed at all floors with all leads and lifts etc.complete. Sqm ₹ 368.18 ₹142,485.66

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new

surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry Rupees One Thousand Four Hundred Sixty Seven

including finised with flush pointing & cleaning the surface etc. complete for antiskit as approved by architect. And Paise Seventy Two Only

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new

surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry Rupees One Thousand Three Hundred Forty Four

including finised with flush pointing & cleaning the surface etc. complete for light shade/ dark shade as approved by architect. And Paise Fifty Eight Only

Providing and laying Vitrified tiles 8 to 10 mm thick , 48'' x 48'' in flooring treads of steps and landing laid on a bed of 12mm thick Rupees One Thousand Five Hundred Thirty One

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement. And Paise Eighty One Only

Providing and laying Antiskid Ceramic tiles of 450mm x600 mm / 600mm X 600 mm 6mm thick in flooring treads of steps and landing

laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement selected as per Rupees Seven Hundred Seventy Five And Paise

attached detail architectural drawing and materal selection list as approved by architect. One Only

Providing and laying coloured glazed tiles of the size 450 mm x 600 mm x 8 mm / 600 mm x 600 mm x 8 mm in skirting, risers of steps

Rupees One Thousand Four Hundred Eighty Eight

39 424 and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with white cement slurry as approved by architect. Sqm ₹ 1,488.23 ₹631,009.52

And Paise Twenty Three Only

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the

building all complete as per the architectural drawings with 30 mm thick stone slab over 30 mm (average) thick base of cement mortar

1:4 (1 cement : 4 coarse sand) / Polymer modified mortar laid and jointed with cement slurry and pointing with white cement slurry

admixed with pigment / Polymer modified mortar of matching shade including rubbing , curing and polishing etc. all complete as Rupees Two Thousand Three Hundred Seventy

specified and as directed by the Engineer-in-Charge.Work shall complete includes all type of tools,tackles, all level & Height, labour etc Five And Paise Fifty Two Only

complete as per the detailed drawing and instruction of EIC. Basic rate of Granite : Rs. 150/ Sq.ft

Providing and fixing white designer marble inlay work with stone thickness12-16 mm, white double charged polished etc,metal, Rupees Twelve Thousand Four Hundred Ninety

brass, sheet etc.Contractor shall submitt Shop drawing for approval of Architect/ EIC before execution. Seven And Paise Seventy Four Only

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Providing and laying 3 to 5 mm thick (250 GSM) polypropylene tile protection bubble sheet to protect the floor against services, painting,

Rupees One Hundred Twelve And Paise Eleven

42 1330 false ceiling work, piping work. Sheet should be laid property and; Bok) with abrotap. After finishing all the work, sheet should be Sqm ₹ 112.11 ₹149,106.30

removed and clean the surface etc. complete as directed by engineer incharge

Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded stone aggregate 20mm nominal size) laid in

Rupees Three Hundred Forty Nine And Paise Nine

43 1558 one layer and finished with a floating coat of neat cement. (B) 50mm thick. Sqm ₹ 349.09 ₹543,882.22

All the waterproofing activities shall be carried out by in-house application company of the principal material manufacturer and provide a

written corporate Supply Apply Corporate Warranty from the principal manufacturer that all work executed will be free from defects in

materials, workmanship and free of leaks for a period of 3 years from the date of Work Completion, unless resulting from structural

defects or causes other than the work of this section. Said defects shall be remedied by the principal manufacturer for the period of the

warranty without additional cost to the owner for waterproofing material only. Providing and applying hydrophilic crystalline based

waterproofing system In two coat application.The application to be done from +ve(positive) side on a wet open pore green concrete Rupees Three Hundred Ninety Eight And Paise

44 1212 surface at coverage of 0.8to1kg/sqm as per manufacturer specification.It should be hydrophilic in nature,should be able to grow crystals smt ₹ 398.95 ₹483,527.40

Ninety Five Only

year after year to seal microcracks.The product should confirm to DIN1048 part5 and should provide in depth crystallization.The

material and application warranty to be given by manufacturer’s authorized distributor/applicator on prescribed format for10 years.Note:-

Treated area should be screeded using hydrophilic crystalline admixture KIM(Krstol Internal Membrane) @ 2% for be stresults:-

Application of crystalline coating to be done within 7days of casting of concrete

Providing and mixing water proofing materials in cement mortar in proportion recommended by the manufacturer.

45 558 kg. ₹ 49.25 Rupees Forty Nine And Paise Twenty Five Only ₹27,481.50

Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm broken pieces of glazed tiles to be laid

over cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme out upto surface using white cement

Rupees Seven Hundred Seventy Nine And Paise

46 1203 including rounding off junctions and extending them upto 15 cm along the wall,clearing with water and oxalic acid etc. as directed. Sqm. ₹ 779.69 ₹937,967.07

Sixty Nine Only

Providing and laying 16-18 mm thick polished granite stone machine cut in single piece (Max. available) in sill and jambs of door

,window,ventilation & lift wall cladding,staircase flooring landing, risers & treads, skirting laid over 10 mm thick cement mortar 1 : 3 (1

cement : 3 coarse sand) and jointed with grey cement slurry with matching pigment incl. rubbing and polishing, half rounding edge and Rupees Two Thousand Eight Hundred Forty Seven

incl. fixing of hilty fastener at every 1/3 span of sill as required size etc. complete colour and shed as approved by architect engineer in And Paise Thirty Five Only

Providing and fixing Green Marble stone in18mm thick Stair steps threds and risers over 10mm (Average) thick base of cement mortar

1:3 (1-cement : 3-coarse sand) laid over and jointed with grey cement slurry including rubbing and polishing etc. complete selected as Rupees One Thousand Eight Hundred Forty Six

per attached detail architectural drawing. And Paise Twenty Three Only

Providing and laying 19mm x 25mm round ,'D' edge and polished granite pencil patti on top, with cement paste and including backing

Rupees Three Hundred One And Paise Sixteen

49 150 coat in C.M. 1:4. All joints filled with colour / epoxy grout and wiped to give sharp joints with flush pointing and washed clean with acid Mtr ₹ 301.16 ₹45,174.00

Providing and fixing main door 50mm.th. double shutter specially designed hollow door made out of 7.5x5 cm.t.w. frame work with

6mm.th. waterproof ply and lamination over it, on both the sides, colour pattern and design of which is to be approved by the architect.

Rupees Seven Thousand Five Hundred Thirty

50 6 doors shall be provided with pivot and 60 cm. long stainless steel handles as/detail. as per attached detail architectural drawing. Sqm. ₹ 7,538.27 ₹45,229.62

Eight And Paise Twenty Seven Only

Providing and fixing Single/double shuttered door having black granite frame with all open edges machine cut & machine polished, fixed

by special hinges with double shutter of 35 mm th both side pre laminated md flushed door, from "greenply" or equivalent company. as

Rupees Five Thousand Two Hundred Ninety Three

51 10 per attached detail architectural drawing. Sqmt ₹ 5,293.55 ₹52,935.50

And Paise Fifty Five Only

Providing and fixing FRP of 35mm thick Fiber Glass shutter with 1.5 to 2.0 mm thick fire retardent grade FRP skin in depressed panel

design having extra reinforcement on sides & edges & in Gel coat finish. The core of the shutter is to be filled up with injected retardent

grade polyurethane foam done in situ alongwith embedded wooden pieces for stiffening & also taking hinges & fintures. The whole FRP Rupees One Thousand Two Hundred Sixty Nine

52 41 frame & shutter is to be water proof ,weather proof, termite proof & resistance to mild acid/alkali. Rates are to be inclusive of S.S hinges Sqmt ₹ 1,269.63 ₹52,054.83

And Paise Sixty Three Only

with necessary screws & alluminium fixtures & fastenings. approved by the architect.

Providing and Fixing heavy duty S.S. Door Closer as directed by Engineer In charge. Rupees Nine Hundred Forty Three And Paise

Twenty Five Only

Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths inter locked together through their entire length

and jointed together at the ends by end locks mounted on specially designed pipe shaft with bracket plates, guide channels and Rupees Four Thousand Five Hundred Forty Six

arragements for inside and outside locking with push-pull operation including the cost of hood cover and spring etc. complete.(A) And Paise One Only

Shutters having width Above 3.5 M.

Providing & fixing M.S. Grill for with necessary fitting with necessary fitting with one coat of primer and two coat oil paint as per details

55 1210 given by architect instructions given by engineer in charge Kg. ₹ 150.08 Rupees One Hundred Fifty And Paise Eight Only ₹181,596.80

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 127mm x

38.10mm x 1.35mm @wt. 1.384kg/m, horizontal Four track member size 122.20mm x 31.75mm x 1.10mm@ wt

1.205 kg/m, vertical member of size 122.20mm x 31.75mm x 1.50mm @1.398 kg/mt with sliding shutters of horizontal member size

40mm x 18mm x 1.29mm@ 0.456kg/mt ,vertical member of size 40mm x 18mm x 1.29mm @ 0.456 kg/mt with 5 mm thick Rupees Two Thousand One Hundred Forty And

transparentbronze colour tinted float glass with powder coatedaluminum fittings and fixtures and transparent silicon sealant glass fixing Paise Thirty Three Only

to frame as per details etc complete for window(3 SHUTTER +1 MOSQUITO SHUTTER )

Providing and fixing Three Track Domal window having extruded aluminum Colour anodized 60 micron Sliding section outer frame size

80 mm x 45 mm weight 1.555 kg/m (Jindal Section code : 21376) and shutter frame 27 mm x 65 mm weight 0.851 kg/m (Jindal

Section code : 21490) and Section inner patti size 38.70 mm x 28.50 mm weight 0.303 kg/m (Jindal Section code 19453) , mosquito Rupees Five Thousand Eight Hundred Seventy

jali channel - 9 mm x 15 mm x1.20 mmx1.20 mm weight .118 kg/m (jindal section code 15784 ) with 5 mm clear Frosted Glass (Modi Four And Paise Sixteen Only

or Saint Gobain) and including all accesible accesories complete etc. or as directed Engineer in charge.

Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 95mm x

24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three track member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07 Kg/mt , vertical

member of size 92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of horizontal member size

mmx18mmx1.29mm @ wt.of 0.456 Kg/mt, vertical member of size 40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt/ with 5 mm thick Rupees One Thousand Five Hundred Eighty Three

transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing And Paise Ninety Five Only

to frame as per

details etc (2 SHUTTER +1 MOSQUITO SHUTTER )

Providing and fixing louvered glass windows and ventilators with alluminium section of size 63mm x 38.10mm x 1.2mm @ Wt.

0.643 Kg/mt with colour anodized alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for Ventilation Rupees One Thousand One Hundred Seventy Five

selected as per attached detail architectural drawing. And Paise Fifty Five Only

Providing 10mm thick cement mala plaster in double coat on brick/concrete walls for interior plastering upto floor two level and finished

Rupees Two Hundred One And Paise Seventy

60 3151 even and smooth in (i)Cement mortar 1:4 (1-cement:4-sand) Ground Floor Sqm ₹ 201.79 ₹635,840.29

Providing 10mm thick cement mala plaster in double coat on brick/concrete walls for interior plastering upto floor two level and finished

Rupees Two Hundred Twenty Five And Paise Sixty

61 1348 even and smooth in (i)Cement mortar 1:4 (1-cement:4-sand) First Floor Sqm ₹ 225.69 ₹304,230.12

Providing 10mm thick cement mala plaster in double coat on brick/concrete walls for interior plastering upto floor two level and finished

Rupees Two Hundred Forty Nine And Paise Fifty

62 330 even and smooth in (i)Cement mortar 1:4 (1-cement:4-sand) Second Floor Sqm ₹ 249.59 ₹82,364.70

Providing 15mm thick cement mala plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto

Rupees Two Hundred Fifteen And Paise Sixty Four

63 1832 floor two level and finished even and smooth in (i) Cement mortar 1:4 (1-cement:4-sand) Ground floor Sqm ₹ 215.64 ₹395,052.48

Providing 15mm thick cement mala plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto

Rupees Two Hundred Forty Four And Paise Thirty

64 1395 floor two level and finished even and smooth in (i) Cement mortar 1:4 (1-cement:4-sand) First floor Sqm ₹ 244.39 ₹340,924.05

Providing 15mm thick cement mala plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto

Rupees Two Hundred Forty Nine And Paise

65 390 floor two level and finished even and smooth in (i) Cement mortar 1:4 (1-cement:4-sand) Second floor Sqm ₹ 249.25 ₹97,207.50

Twenty Five Only

Providing cement vata (10 mm. x 10 mm. size) quarter round in cement mortar 1:1 including neat cement finishing, watering etc.

66 146 complete. Rmt ₹ 24.28 Rupees Twenty Four And Paise Twenty Eight Only ₹3,544.88

Providing 20 mm thick double coat mala cement plaster on interior brick / concrete work for plastering comprising of base coat of

mm thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in rough

Rupees Two Hundred Eighty Three And Paise

67 1963 finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including scaffolding curing etc. Sqmt ₹ 283.95 ₹557,393.85

Ninety Five Only

Providing and laying 20mm thick stone stonecrete in laid over 20mm thick cement mortar 1: 3 (1 cement: 3 coarse sand) and jointed

Rupees One Thousand Nine Hundred Thirty Seven

68 1410 with grey cement slurry with matching pigment in flooring complete as approved by architect engineer in charge. Sqmt ₹ 1,937.18 ₹2,731,423.80

And Paise Eighteen Only

Providing 20 mm thick water proof cement plaster using water proofing powder 1Kg/1bag of cement for all floors on brick / concrete wall

work using water proofing materials in C M 1: 4 ( 1 cement 4 coasrse sand) including finishing with a flooting coat of neat cement slurry

etc complete for all floor. and shall be guaranteed for minimum period of 10 years after handing over the completed building by the main Rupees Two Hundred Seventy Six And Paise

contractor to be finished as directed. Stamp paper guarantee 10 years to be furnished before receiving any payment from the client. Eighty Five Only

Providing and applying 2mm thick Texture Plaster of Earthen Textures, Travertino Texture, Coral texture or equivalent make

incorporating fine filaments made of polymer and aggregating natural stone powder with making grooves on existing base coat of

Rupees Four Hundred Forty Two And Paise Sixty

70 690 mm thick smooth mala plaster etc. Complete Exterior weather proof two coat paint in any shade as approved by Architect/ Engineer in Sqmt ₹ 442.66 ₹305,435.40

charge for all floor all height.

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.

71 6789 Sqmt ₹ 40.59 Rupees Forty And Paise Fifty Nine Only ₹275,565.51

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even

shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth and ₹

72 3439 Sqmt Rupees Eighty Three And Paise Eighteen Only ₹286,056.02

colour approved by architect.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated Ceiling surface to give an

even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth and ₹

73 3350 Sqmt Rupees Eighty Eight And Paise Seventy Only ₹297,145.00

colour approved by architect.

Finishing wall with weather proof exterior acrylic emulsion paint on wall surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete colour and shade approved by Rupees Seventy Three And Paise Eighty Three

architecture. Only

Fabricating, supplying and fixing in position SS railing for staircase and balcony with brush finish and 304 grade as per Indian Standrd

and detailed drawing including grinding, cleaning and filling the welded spots with SS railing (Only Length will be paid for payment

heigth max.1.0 mt.). The Work to be executed as per consultant drawing . 50mm dia.(16 gauge) TOP RAIL ,32 mm dia.(16 gauge) Rupees Three Thousand One Hundred Seventy

VERTICAL SUPPORT ,16 mm dia.(16 gauge) HORI. MEMBER ,100mm dia. x 8mm size plate Three And Paise Forty Two Only

Providing and fixing in position S.S. daso by providing top 50 mm dia stain less steel pipe rail with starting and end point vertical post of

Rupees One Thousand Seven Hundred Ninety

76 8 50 mm dia with wall/column including bending welding and fixing for staircase and balcony as directed. (testing is required of s.s 304) Rmt. ₹ 1,794.77 ₹14,358.16

Four And Paise Seventy Seven Only

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed

77 125 including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all Rmt. ₹ 72.64 Rupees Seventy Two And Paise Sixty Four Only ₹9,080.00

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed

78 200 including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all Rmt. ₹ 91.83 Rupees Ninety One And Paise Eighty Three Only ₹18,366.00

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed

Rupees One Hundred Forty Eight And Paise

79 360 including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all Rmt. ₹ 148.11 ₹53,319.60

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed

Rupees One Hundred Ninety Five And Paise Sixty

80 300 including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all Rmt. ₹ 195.66 ₹58,698.00

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF)

seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. Rupees One Hundred Seventy And Paise Thirty

complete.[A] 15 mm. Five Only

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF)

seal for potable water of following dia. nominal bore tube fittings and clamps Rupees Two Hundred Eight And Paise Seventy

including making good the wall, ceiling and floor etc. complete. [B] 20 mm. Nine Only

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF)

seal for potable water of following dia. nominal bore tube fittings and clamps Rupees Two Hundred Fifty Three And Paise Eighty

including making good the wall, ceiling and floor etc. complete. [B] 25 mm. Two Only

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF)

seal for potable water of following dia. nominal bore tube fittings and clamps Rupees Four Hundred Forty Seven And Paise

including making good the wall, ceiling and floor etc. complete. [B] 40 mm. Seventy Two Only

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF)

seal for potable water of following dia. nominal bore tube fittings and clamps Rupees Six Hundred Sixty And Paise Fifty Eight

including making good the wall, ceiling and floor etc. complete. [B] 50 mm. Only

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Providing and fixing Gun metal check or non-return fullway wheel valve.(C) 25mm dia. Rupees Four Hundred Twenty And Paise Sixty

Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm dia. Rupees Six Hundred Sixty Three And Paise Forty

Providing and fixing Butterfly valves IS 13095 with ISI mark PN 1.6 of aprroved brand & follwing internal dia including fixing in pipe lines

Rupees One Thousand Six Hundred Seventy Five

88 6 etc.complete (A) 50 mm Dia No. ₹ 1,675.59 ₹10,053.54

And Paise Fifty Nine Only

Providing and fixing special type clamping system made out from C patti, Z patti, L Clamp , U clamp with Nut/ Bolt and washer as

suitable arrangement for water supply and plumbing system like Drainage Line , Rain Water line and supply line for Hot and Cold water

Rupees One Hundred Sixty And Paise Fifty Nine

89 50 etc line fitting from GF to 2nd Floor required as per site condition for fixing etc complete. 15 to 40mm dia Pipe Nos. ₹ 160.59 ₹8,029.50

50 to 65mm dia pipe Rupees One Hundred Eighty Seven And Paise

Eighty Six Only

75 to 110mm dia pipe Rupees Two Hundred Twenty And Paise Eighteen

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene pipes of the following outside Dia. Low

densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(F) 75mm Rupees Two Hundred Eighty And Paise Twenty

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene pipes of the following outside Dia. Low

densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(F) 110mm Rupees Three Hundred Thirty Nine And Paise

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and

other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall

be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm Rupees One Thousand Fifty Three And Paise

94 122 length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such Rmt. ₹ 1,053.73 ₹128,555.06

Seventy Three Only

as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.

Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and

other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall

be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 160 mm diametre x 210 mm Rupees Eight Hundred Thirty Four And Paise

95 120 length x 196 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such Rmt. ₹ 834.38 ₹100,125.60

Thirty Eight Only

as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.

Providing and fixing ECO Drain Pipes in including supporting the ECO Drain pipe on the bricks at each joint including leakproof joints

ECO Drain Pipe etc., complete Rupees Five Hundred Eighty And Paise Seventy

200mm dia. Five Only

Providing and fixing ECO Drain PVC Pipes in including supporting the ECO Drain pipe on the bricks at each joint including leakproof

joints ECO Drain Pipe etc., complete Rupees One Thousand Three Hundred Seventy

300 mm dia.pipe And Paise Fifty Seven Only

Providing and fixing PVC /SWR Nahni trap IS 14735 for drain - 75 mm diameter with jali of the following nominal diameter of self

cleansing design with C.I scread down or hinged grating including the cost of cutting and making good the walls. Rupees Seven Hundred Eighteen And Paise

Twenty Two Only

Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap polished bright. (i) 15mm dia.

Rupees One Hundred Eighty Six And Paise Eighty

Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. (i) 15mm dia.

Rupees Three Hundred Eight And Paise Seventy

Providing and fixing table top wash basin on 18mm thick black shade polished granite for top with 2 Nos. of C.I. Heavy brecket with

Nos. of wash basin Jaquar brand or equivalent, C.P. brass Jaquar pillar cock or equivalent, angle valve or equivalent, C.P. brass

extension nipple 62mm long, S.S. flange water super connection pipe 60cm. long and full thread waste coupling includingm, bottle trap Rupees Thirteen Thousand One Hundred Twenty

making hole in granite for wash basin etc. complete. Table Top Wash Basin (jaquar - KUS-WHT-35901) , Piller Cock (jaquar - FLR- Three And Paise Ninety Four Only

5007B) , Angle Valve (jaquar - FLR-5053N)

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Providing and fixing wash down wall hung water closet(European type) of jaquar or equivalent with integral 'P' trap jointed within C.I

pipe in C:M 1:1 including matching seat cover, chair braket, Conceled metropole of jaquar or equivalent, 2 way bibcock of jaquar or

equivalent, health foucet of jaquar or equivalent with 1 m extension pipe, toilet paper holder of jaquar or equivalent with all accessories Rupees Seventeen Thousand Eight Hundred Thirty

etc. complete. Wall Hung Water Closet (jaquar - SLS-WHT-6953BIPPSM) ,Metropole (jaquar - FLV-1093N) ,2 Way Bib Cock (jaquar - Seven And Paise Sixty One Only

FLR-5041N) ,Health Faucet (jaquar - ALD-573) ,Toilet Paper Holder (jaquare - ACN-1151N)

Providing and fixing urinals of jaquar or equivalent with integral drain pipe jointed within C.I pipe in C:M 1:1, Conceled cock, all

Rupees Twelve Thousand Three Hundred Thirty

103 12 accessories etc. complete. (jaquar - URS-WHT-13255) , Urinal Flush Valve Jaquar PRS-073 No. ₹ 12,337.15 ₹148,045.80

Seven And Paise Fifteen Only

Providing and fixing 2 Nos. support arms and backrest to mount at fixed height (Model R 1100 -Commander or equivalent) for handicap

Rupees Twenty Six Thousand Five Hundred

104 1 toilet complete as recommended by the etc completed as directed/ approved by engineer In charge or Architect. Each ₹ 26,577.14 ₹26,577.14

Seventy Seven And Paise Fourteen Only

Providing and fixing raised toilet seat with cover for handicap toilet (Model R-35: Presalit – Commander or equivalent) as recommended

by the etc completed as directed/ approved by engineer In charge or Architect. Rupees Twenty Four Thousand Six Hundred

Seven And Paise Sixty Four Only

Providing and fixing brackets, tracks (Model R4140) with flexible feed & waste pipes for adjustable type wash basin complete as

recommended, for handicap toilet (Make : Presalit – Commander or equivalent)etc completed as directed / approved by engineer In Rupees Forty Three Thousand Five Hundred Six

charge or Architect. And Paise Seventy Six Only

Providing erecting and fixing double coated ISI water tank of required capacity each with all necessary fittings and connection etc.

107 34000 complete on terrace Lit ₹ 3.94 Rupees Three And Paise Ninety Four Only ₹133,960.00

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and

Rupees Eight Hundred Fifty Nine And Paise Forty

108 6 fixing to wooden pluge with C.P. brass screws and washers. No. ₹ 859.40 ₹5,156.40

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden plugs with C.P. brass scews.(B) 600mm x

Rupees Six Hundred Sixteen And Paise Forty Two

Providing and fixing brass screw down stop tap.(A) 15mm dia. Rupees Two Hundred Five And Paise Eighty Two

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having crushing strength not less

than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to

be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4- Rupees Three Thousand Six Hundred Sixty And

111 8 graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with No. ₹ 3,660.75 ₹29,286.00

Paise Seventy Five Only

a floating coat of neat cement on walls and bed concrete etc. complete.(ii) Inside dimensions 500mm x 700 mm and 450mm deep for

pipe line with one or two inlets.

Providing and fixing in position cowel went to pipes.(B) 75mm dia. Rupees Three Hundred Ninety Three And Paise

Providing and fixing in position cowel went to pipes.(C) 100mm dia Rupees Five Hundred Five And Paise Seventeen

Providing & fixing stainless steel (stainless steel plate of 302 No. ) letter of 45c.m. size finished with radium sticker including necessary

scaffolding for fixing with epoxy material etc. comp. as directed by engineer in charge (Additional Article of Gujarati letter are consider as Rupees Two Thousand Twenty Seven And Paise

a half letter) Ninety Seven Only

Providing and constructing SOAK WELL of 3.50 m internal dia and 8 .00 depth depth internal clear dimention including the cost of

execavation,PCC 1:4:8 foundation for honey combed masonary in C.M. 1:4 (1cement : 4 sand) , casting R.C.C. 1:2:4 (1cement :

sand : 4 graded stone aggregate 20mm nominal size) top slab 12 thick with C.I. manhole cover 600mm x 450mm size of 35 kg. weight

Rupees Seventy Four Thousand Nine Hundred

115 1 and 75mm dia C.I. pipe 1800mm long with 75mm dia cowel vent and filling the wall 1000mm in depth with dry brick bats including Nos. ₹ 74,943.75 ₹74,943.75

Forty Three And Paise Seventy Five Only

providing vata in C.M. 1:3 (1cement : 3 sand), curing including cost of reinforcement etc. complete as per detailed drawing and directed

Construction Septic tank inside dimention of 4.00 m in length & 2.50 m in width & 2.00 m depth including excavating any type of soil as

shown and mentioned in the drawing,providing and laying 0.10 m thick plain cement concrete 1:3:6 ( 1 cement : 3 coarse sand :

graded stone agg.) 40 mm thick IPS flooring at bottom with brick masonary 0.23 m thick walls CM 1:5 ( 1 cement : 5 coarse sand ) and

intermediate partition CM 1:4 & RCC Top slabs12 cms thick in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone agg) including

Rupees Seventy Three Thousand Nine Hundred

116 1 reinforcement as per design and 15 mm thick cement plaster in CM 1:4 with floating coat of neat cement slurry inside, top and around Nos. ₹ 73,964.12 ₹73,964.12

Sixty Four And Paise Twelve Only

tank below 15 cm on ground level, Also provide Two nos CI Manhole frame and cover of size 60 cm x 45 cm & 75 mm dia. PVC 10 kgf /

Sq cm pressure air vent pipe in 3.00 length with cowl etc complete as per direction of Engineer in charge.

Providing & fixing Steel work welded, in built up sections framed work including cutting, hoisting, fixing in position and with one coat

primer & two coat oil paint as per detail drawings etc. complete. in columns, beams and joists, channels M.S. flat, Angles, Pipes, tees Rupees One Hundred Thirty One And Paise Eighty

flats with connecting plates or angle cleats STRUCTURAL STEEL Two Only

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Providing and position PVC Sleeves in RCC elements like walls slabs beams etc. of 10 Kg/cm2 UPVC Pipes and diameter of taking out

Rupees One Hundred Seventy Five And Paise

118 10 service pipelines cables road infrasturcture work etc. upto 1 mtr. length for all floors/ all levels / all heights. 50 mm dia Each ₹ 175.38 ₹1,753.80

Thirty Eight Only

Providing and position PVC Sleeves in RCC elements like walls slabs beams etc. of 10 Kg/cm2 UPVC Pipes and diameter of taking out

Rupees Two Hundred Eighty And Paise Twenty

119 10 service pipelines cables road infrasturcture work etc. upto 1 mtr. length for all floors/ all levels / all heights. 75 mm dia Each ₹ 280.23 ₹2,802.30

Providing and position PVC Sleeves in RCC elements like walls slabs beams etc. of 10 Kg/cm2 UPVC Pipes and diameter of taking out

Rupees Three Hundred Thirty Nine And Paise

120 10 service pipelines cables road infrasturcture work etc. upto 1 mtr. length for all floors/ all levels / all heights. 110 mm dia Each ₹ 339.04 ₹3,390.40

Providing & fixing of reinforcement bars ( reiforcement bars shall be paid extra under relevant item of work) after drilling the hole of

required diameter & depth ,cleanning of the same ,providing/ filling the hole with Injection Mortar (HIT HY 150 of Hilti or approved

121 100 equivalant), inserting reinforcement bar etc. complete as per Manufacturers & architects instruction.The work shall be carried out by the Each ₹ 104.03 Rupees One Hundred Four And Paise Three Only ₹10,403.00

technical workmens/ agency approved by the manufacturer and under technical supervision of Manufacturer of Injection grout including

all materials, tool tackles, labour etc.complete. (a) 8 mm. dia.bar -Holes 12mm dia Depth 100mm

Providing & fixing of reinforcement bars ( reiforcement bars shall be paid extra under relevant item of work) after drilling the hole of

required diameter & depth ,cleanning of the same ,providing/ filling the hole with Injection Mortar (HIT HY 150 of Hilti or approved

equivalant), inserting reinforcement bar etc. complete as per Manufacturers & architects instruction.The work shall be carried out by the Rupees One Hundred Thirty Five And Paise Thirty

technical workmens/ agency approved by the manufacturer and under technical supervision of Manufacturer of Injection grout including Four Only

all materials, tool tackles, labour etc.complete. (B) 10 mm. dia.bar -Holes 14mm dia Depth 100mm

Providing & fixing of reinforcement bars ( reiforcement bars shall be paid extra under relevant item of work) after drilling the hole of

required diameter & depth ,cleanning of the same ,providing/ filling the hole with Injection Mortar (HIT HY 150 of Hilti or approved

equivalant), inserting reinforcement bar etc. complete as per Manufacturers & architects instruction.The work shall be carried out by the Rupees One Hundred Sixty Seven And Paise Sixty

technical workmens/ agency approved by the manufacturer and under technical supervision of Manufacturer of Injection grout including Six Only

all materials, tool tackles, labour etc.complete.(C) 12 mm. dia.bar -Holes 14mm dia Depth 120mm

Providing & fixing of reinforcement bars ( reiforcement bars shall be paid extra under relevant item of work) after drilling the hole of

required diameter & depth ,cleanning of the same ,providing/ filling the hole with Injection Mortar (HIT HY 150 of Hilti or approved

equivalant), inserting reinforcement bar etc. complete as per Manufacturers & architects instruction.The work shall be carried out by the Rupees Two Hundred Fifteen And Paise Thirteen

technical workmens/ agency approved by the manufacturer and under technical supervision of Manufacturer of Injection grout including Only

all materials, tool tackles, labour etc.complete. (D) 16 mm. dia.bar -Holes 20mm dia Depth 160mm

GRC WORK : Providing & fixing architectural moldings profiles and other decorative elements made out of GRC (Glass Fibre reinforced

Cement) in required shape, size & thickness all as per manufacturers specifications, such as all decorative articles should be made by

using high power spray machine, using AR Glass fiber with minimum ZrO2 16% including necessary scaffoldings for all heights, as per

approved drawings and reference images. GRC elements thickness shall be 12-15 mm. fixing edges will be 4O TO 50 MM GRC

Elements shall be fixed on RCC Structure/Brick Work/ Primary Steel Structure (MS with protective coat of Red oxide/Zinc Primer Shall

be Used). Hilti make GI Screw Fastners or equvalent, GI Thread Rods and MS cleats shall be used for fixing of GRC elements on Rupees Five Thousand Nine Hundred Seventy

RCC/MS Primary fabricated structure. Joints shall be filled with PU sealants/ base material of GRC as and where required. The quote Seven And Paise Eighteen Only

rate shall be inclusive of all design, & shop drawing and sample mock of all elements approval from Architect & consultant..Rate shall

be inclusive of all required fabrication work for fixing only primary strcure shall be provided as base structre only as per requirement.

Mode and method of measurement shall be in accordance with IS: 1200. Contractor shall submitt Shop drawing for approval of

Architect/ EIC before execution.

GRC CHAJJA BOTTOM BRACKET : Providing and fixing Glass reinforced concrete (GRC) Chajja bottom bracket cladding work,GRC

includes SDS screw from front at 600 to 800 mm intervals with modulethickness jali 40mm border and all inside 20mm thick and

module thickness in solid area 40 & 20 mm & hollow at back side having alkali resistance glass fibre type 3% minimum, compressive Rupees One Thousand One Hundred Sixty One

strngth 40 Mpa Minimumn, Fluxtural strength 10to12Mpa, dry density 1.8to 2.0 MT/Cum havning 14% water absorption, nesesary And Paise Fifty Only

scaffolding worketc. complete as per detail drawings & as suggested and directred by Architect /EIC.

Designing, Supply and Installation of SS Signages, shown in drawing should be erected with S.S. 304 wall mounting digital printing

on various medium as per approved by EIC or architect. (font thickness -42 mm ) Rate is inclusive of all other charges like required civil

Rupees Eight Hundred Ninety Nine And Paise

127 60 work, transportation, labour, colour, wastage etc. Measurement shall be valid only for the Signages element including the Nos ₹ 899.91 ₹53,994.60

Ninety One Only

supports/installation elements.

Jesalmer Stone Railing work - Providing and fixing Jesalmer Stone Railing work as per given detail drawing throughout in cement

mortar1:3 (1 cement : 3 coarse sand), including balustar, jarukho, lamppost, polishing, cutting, coating, pointing in white cementmortar

Rupees Forty Two Thousand Three Hundred Sixty

128 13 1:2 (1 white cement : 2 stone dust) with an admixture of pigment,matching the stone shade, etc. Loose and laid sample shall be smt ₹ 42,367.48 ₹550,777.24

Seven And Paise Forty Eight Only

approved by Architect and EIC before execution.

Providing and fixing 6 mm thick HPL sheets(as specified in item no. 128) as Signage and Display/cnc embosed of health

signs/information of required size having retro reflective letters/design as per requirement, including all fixing accesssories for the same

Rupees Six Hundred Fifty And Paise Forty Four

129 30 through approved adhesive,screw etc. complete work shall e carried out as per instruction of Engineer-in-charge (45 x 15 cms.) (work Nos. ₹ 650.44 ₹19,513.20

for all the floors)

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Supplying & installing Brass Ball Valve conforming to IS 778, of RB, Italy or equivalent. Ball valve must be having screwed ends. The

Rupees Two Thousand One Hundred Forty Seven

130 4 ball valve should be with stand with maximum pressure up to 16 Kg/cm2. Complete job as specified & directed. 50 mm Nos ₹ 2,147.61 ₹8,590.44

And Paise Sixty One Only

Providing and fixing HPL sheet of 6mm or more thick of Standard(S-type)having post forming,flame retardent, chemical resistance type

and of enhanced durability against weather and UV radiation. It offers resistance to heat, moisture& impact. This includes required Rupees Three Thousand Five Hundred Forty Nine

aluminium framing to fix HPL sheets of approved design,type,shade and size as per drawing approved by architect/EIC. And Paise Fourteen Only

Proving & fixing Bird spikes Size: 0.5m Length With 60 Stabs material - Stainless Steel SS/ Polycarbonate cover width -3 inches

132 600 ,height of spikes -4 inch as per drawing / approved by Engineer In charges/ Architect Rmt ₹ 69.69 Rupees Sixty Nine And Paise Sixty Nine Only ₹41,814.00

Providing and fixing 15 mm thick 300 mm x 300 mm Tactile warning tiles (Attention Tiles i.e. Tectile Warning Surface Indiactor (TWSI)

of Johnsan Endura Tac Botton Yellow plus or quivalent make in flooring laid on 20 mm tihck cement mortar 1:6 ( 1 Cement : 6 Coarse

sand) on new surface and jointed with cement slurry including finished with flush pointing & cleaning the surface for all floors as per Rupees One Thousand Three Hundred Thirty Two

133 50 detailed drawing etc. completed as directed by Architect or Engineer in charge. These tiles shall be Anti Skid, chemical resistant, Fade smt ₹ 1,332.43 ₹66,621.50

And Paise Forty Three Only

Proof, Frost - Heat & Weather proof, High Flexural Strength, Highly durable, Stain resistance. All Tectile warning tiles meet the specific

size and dimension standard as per required by ISO / FDIS

Providing and fixing coloured self adhesive PU Tactile tile, ground surface indicators of Poyurethene of size 300 mm x 300 mm for

guilding / warning to the visually visitors in the center / side of the pedestrian / approach pathway as per specificatio and guidelines Rupees Two Thousand Nine Hundred Fifteen And

complete in all respect to the entinre satisfaction of Engineer in charge. Paise Thirty Six Only

Providing and fixing Braile indicator of size 170 mm x 35 mm for hand rails of the approved design and hame have braile dots raised

Rupees Eight Hundred Forty Two And Paise Eight

135 5 mm above the base plate to be installed at specific locations as per direction of Engineer in charge. rmt ₹ 842.08 ₹4,210.40

Providing and fixing Acrylic multilingual braile (raised dots) DIRECTIONAL SIGNBOARDS of size 225 x 150 mm designed as per

accessibility standards and having 3.5 mm thick acrylic base plate with Upper Case San Serif words made of white

acrylic non glare cut out letters of height 15 mm raised not less than 0.8 mm above base plate and the equivalent word written in

Gujarati, English or Hindi non glare acrylic cut arrow pointing in the require direction. Each signboard to be fixed as per manufacturers Rupees One Thousand Two Hundred Seventy

specifications on the wall at the approved location and at a height of 1200 mm from Floor level complete as per design / specifications Seven And Paise Sixty Five Only

and guidelines as per entire satisfaction of the Engineer in charge.

Roofing Shingle (DUSOL PRO) made of sequencial 8 layers as 4 layers two times of natural coloured stone, elastomeric modified

bitumen, fibreglass mat & elastomeric bitumin.

Inspect for damage,rot,or uneven areas.Replace as needed. Clean off dust ,debris and old roofing materials.ensure the roof is smooth

and completely dry.than Lay the first shingles along with eaves and align it carefully for a straight edge. Use a propane tourch, holding

it 6-12inches from the shingles underside. Sweep the flame evenly to heat the adhesive layer.once tacky and shiny, immediately press it Rupees One Thousand Seven Hundred Forty Nine

onto the roof.use a roofing roller or preasure board to press the shingles into the place.ensure full contact and remove air pockets. And Paise Thirty Two Only

repeat the process for each new shingle. overlap each shingles by 75-100mm to ensure proper seal.use ridge shingles or cut regular

shingles to fit the roof ridge or hips.tourch them into place,ensuring proper overlap and sealing.reheat and press any sections needing

additional adhesion.

APP Polymer Modified Bituminous Waterproofing Membrane(TIKIDAN MEMBRANE) sheet of 3mm thickness composed of non

wooven composite matrix of polyester mat as core reinforcing media suitably finished with thermo fusible polyethylene film on top and

bottom side of sheet as per Instruction of engineer in charge.(MR)

Prepare the surface as clean the surface thoroughly and ensure the surface is dry,smooth & sloped properly to allow drainage. than

priming by apply a bituminous primer evenly across the surface using brush or roller and allow the primer to dry fully. after that unroll Rupees Three Hundred Thirty Seven And Paise

138 666 the APP membrane and cut it to required lengths and align the rolls,ensuring an overlap of 100mm side lap and 150mm end lap. after it Sq.mt. ₹ 337.34 ₹224,668.44

Thirty Four Only

using a propane gas tourch,heat the bottom side of the membrane while unrolling it slowly. the tourch will melt bitumen,allowing it to

bond with the primed surface. use a roller or wooden press down and remove any air bubbles.than make sure all overlaps are properly

heated and bonded.press firmly with a roller to ensure water tight sealing.use prefabricated membrane corners or cut pieces to ensure

full coverage. re torch any suspect areas to ensure proper adhesion.

BITUMEN PRIME COATING is intended for preparation of the surface before installation of torch-on or self-adhesive waterproofing

material. The primer presents a mix of high-quality bitumen and specially selected organic solvents. It has an enhanced covering

139 666 capacity, penetrability and short drying time as per Instruction of engineer in charge. Sq.mt. ₹ 62.62 Rupees Sixty Two And Paise Sixty Two Only ₹41,704.92

Followed by supply of high-end and SBS

polymer modified Ridge with the help of Rupees Six Hundred Thirty Two And Paise Twenty

140 400 torching method and as directed by engineer in charge. R.mt. ₹ 632.26 ₹252,904.00

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Providing and Fixing 12mm EVEREST cement sheet SIZE 2400x1200 mm The quoting price should be inclusive of all types of taxes &

duties ,packing, forwarding, loading, unloading, installation. And work shall be done as per detailed drawing and as directed by engineer Rupees Seven Hundred Forty Nine And Paise

Providing & fixing Percolation well (450mm dia tube well up to 40 meter depth) with including parts Johnson V wire screen, MS pipes,

Gravel, vent pipe, etc. Infiltration Testing & including Boring and sinking 175mm diameter percolation pile with 160 mm OD uPVC

Casing pipes & Screens (C.S.) IS 12818:1992 as per specifications with hand auguring system and clearing the site on completion of

Rupees One Lakh(s) Fifty Thousand Nine

142 1 depth from max 24 meter. with Gravel, Vent pipe 50mm dia 6 meter length, 160mm dia Strainer pipe 3mm Opening. 300mm height Nos ₹ 150,995.00 ₹150,995.00

Hundred Ninety Five Only

300mm dia upvc strainer in sump, etc. Complete job as specified & and as per detailed drawings as directed.

Providing & Fixing Artifical Grass Lawn 25 MM THICK AS PER APPRVOED BY Engineer in charge / Architect Rupees One Thousand Sixty Two And Paise Fifty

Providing & Fixing Glass Brick AS PER given in drawing or APPRVOED BY Engineer in charge / Architect

Rupees Ten Thousand Nine Hundred Ninety

Seven And Paise Eighty Nine Only

WALL CLADDING WORKS (20-30 MM) Supply and fixing at site of work carved fine chisel dressed ornamental BANSIPAHADPUR

GOOD QUIALITY STONE in required size for Gate work in 1:3 cement sand mortar and jointed in white cement to match the colour of

the stone. Joints of stone to be not more than 1/8 inches and depth up to stone size, all visible angles and edges to be straight and free Rupees Three Thousand Five Hundred Twenty

145 154 from chipping work shall be strictly in plumb line and level including providing doweling and jointed by copper metal damps of suitable smt ₹ 3,524.90 ₹542,834.60

Four And Paise Ninety Only

size and as per drawing and design for approved drawing which is displayed in full scale at Gate of site.

Providing and applying 1.5mm - 2.5mm thick 'Terre Expose' plaster made of copolymer binders and fine marble powder of

Earthen/Coral spectrum as per required design and pattern approved by EIC/Architect on 1 coat of base primer of earthen / coral Rupees One Thousand Five Hundred Thirty And

spectrum. Paise Fifteen Only

WALL CLADDING WORKS OF EMBOSSED PATTERN PATTI(300 to 450mm width & 20-30mm thick) Supply and fixing at site of

work carved fine chisel dressed ornamental GOOD QUIALITY STONE PATTI of approved design and pattern in required size for gate

work in 1:3 cement sand mortar and jointed in white cement to match the colour of the stone. Joints of stone to be not more than 1/8 Rupees Seven Thousand Two Hundred Eighty

147 75 inches and depth up to stone size, all visible angles and edges to be straight and free from chipping work shall be strictly in plumb line rmt ₹ 7,282.10 ₹546,157.50

Two And Paise Ten Only

and level including providing doweling and jointed by copper metal damps of suitable size and as per drawing and design for approved

drawing which is displayed in full scale at gate of site.

Providing and laying Jaisalmer Moulding patti over 20mm thick cement mortar 1: 6 (1 cement: 6 coarse sand) finishing with flush

Pointing in white cement and jointed with grey cement slurry with matching pigment with complete as approved by architect / engineer Rupees Five Hundred Seventy One And Paise

in charge. Sixty Six Only

GRC WORK : Providing & fixing architectural moldings profiles and other decorative elements made out of GRC (Glass Fibre reinforced

Cement) in required shape, size & thickness all as per manufacturers specifications, such as all decorative articles should be made by

using high power spray machine, using AR Glass fiber with minimum ZrO2 16% including necessary scaffoldings for all heights, as per

approved drawings and reference images. GRC elements thickness shall be 12-15 mm. fixing edges will be 4O TO 50 MM GRC

Elements shall be fixed on RCC Structure/Brick Work/ Primary Steel Structure (MS with protective coat of Red oxide/Zinc Primer Shall

be Used). Hilti make GI Screw Fastners or equvalent, GI Thread Rods and MS cleats shall be used for fixing of GRC elements on Rupees Five Thousand Nine Hundred Seventy

RCC/MS Primary fabricated structure. Joints shall be filled with PU sealants/ base material of GRC as and where required. The quote Seven And Paise Eighteen Only

rate shall be inclusive of all design, & shop drawing and sample mock of all elements approval from Architect & consultant..Rate shall

be inclusive of all required fabrication work for fixing only primary strcure shall be provided as base structre only as per requirement.

Mode and method of measurement shall be in accordance with IS: 1200. Contractor shall submitt Shop drawing for approval of

Architect/ EIC before execution.

Providing, laying controlled cement concrete M 250 and curing complete including the cost of form work (rates for centering, shuttering,

formwork staging scaffolding for considering up to 1.5M height) but excluding reinforcement for reinforced concrete work in:Providing,

Rupees Eight Thousand Seven Hundred Nineteen

150 32 laying controlled cement concrete M 250 and curing complete including the cost of form work (rates for centering, shuttering, formwork cum ₹ 8,719.66 ₹279,029.12

And Paise Sixty Six Only

staging scaffolding for considering up to 1.50M height) but excluding reinforcement for reinforced concrete work in (D) RCC Wall

Removing and scraping of old deteriorated plaster of any thickness from wall / R.C.C member including stacking of serviceable material

151 807 and disposal of unserviceable from site of work with all lead and lift smt ₹ 19.88 Rupees Nineteen And Paise Eighty Eight Only ₹16,043.16

Providing and laying coloured glass mosaic tiles of the size 300 mm x 200 mm x 8 mm/ 300 mm x 450 mm x 8 mm in water body on

mm. thick cement plaster 1:3 (1 cement: 3 coarse sand) & jointed with white cement slurry. Rupees Seven Hundred Thirty Six And Paise Nine

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Providing and laying Jaisalmer (30 mm thick) two side polished over top / dado skirting 20mm thick cement mortar 1: 6 (1 cement:

coarse sand) finishing with flush Pointing in white cement and jointed with cement slurry with matching pigment in top complete as Rupees Two Thousand Six Hundred Forty One

approved by architect engineer in charge. And Paise Fifteen Only

Box cutting the road surface to proper slope and camber for making a base for road work including removing the excavated stuff and

154 57 depositing on the road side slope as directed upto all lead. cum ₹ 109.08 Rupees One Hundred Nine And Paise Eight Only ₹6,217.56

Providing and Laying 125mm thick W.B.M., in one layers, using B.T.M.C. metal of size 40mm to 63mm in layers including 16% stone

screening 13.2mm size and 8% stone dust as filler, including spreading, watering and cosolidation by vibratory roller as per MoRTH Rupees One Thousand Fifty And Paise Ninety

specifications etc. complete as directed by Engineer-in charge. Seven Only

Construction of un-reinforced, dowel jointed M-250, plain cement concrete pavement over a prepared sub base with 53 grade cement,

coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a b laid with a fixed

Rupees Four Thousand Nine Hundred Forty Four

156 23 form spread, compacted and finished admixtures as approved, concrete surface hardner, curing compound, finishing to lines and cum ₹ 4,944.25 ₹113,717.75

And Paise Twenty Five Only

grades as per drawing

Clearing and grubbing road land including uprooting rank vegetation grass bushes,shrubs,sapling and trees girth up to 300 mm removal

of stumps of trees cut earlier and disposal of unserviceable materials (C) By mechanical means in area of light jungle Rupees Twenty Eight Thousand Four Hundred

Fifty Five And Paise Ten Only

Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering, ramming and consolidating

Rupees Two Hundred Seventy Three And Paise

Eighty Six Only

Rolling & Watering of earthwork in layers with power roller including filling in depressions which occur during the process. As directed

159 2200 cum ₹ 23.41 Rupees Twenty Three And Paise Forty One Only ₹51,502.00

Cobble stone 70 to 80 mm thick : Providing and laying of cobble stone in multi colour (Sand stone) as per approved sample by

Architect/Client. Fixing with 25 mm thick cement mortar ( 1: 4) of thickness on PCC surface as per detailed drawing. The joints of the

stone shall be properly and firmly filled using properly mixed mortar and joints shall be cleaned and well pointed using cement mortar.

Work Including levelling in proper line and level with using surface vibrator etc complete. including cost of all type of tools, tackles, all Rupees One Thousand Six Hundred Ninety And

160 2159 labour, all type of materials, transportation, cleaning of surfaces, if required protecting, for at all level, all depth, all Height, all lead and smt ₹ 1,690.74 ₹3,650,307.66

Paise Seventy Four Only

lift etc. work complete as per the detailed drawing, approved sample, specifications and instruction of Architect/EIC. Sample mock shall

be approved from Architect/ Client. Material Test certificate shall be submitted by the contractor. (Excluding PCC and RCC)

Kerbing stone 150 mm thick ( 300 x 450 mm): Providing and laying of 150 mm thick (+10 mm) cobble stone in multi colour (Sand

stone) as per approved sample by Architect/Client. Fixing with 25 mm thick cement mortar ( 1: 4) of thickness on PCC surface as per

detailed drawing. The joints of the stone shall be properly and firmly filled using properly mixed mortar and joints shall be cleaned and

well pointed using cement mortar.

Work Including levelling in proper line and level with using surface vibrator etc complete. including cost of all type of tools, tackles, all Rupees Nine Hundred Sixty And Paise Fifty One

labour, all type of materials, transportation, cleaning of surfaces, if required protecting, for at all level, all depth, all Height, all lead and Only

lift etc. work complete as per the detailed drawing, approved sample, specifications and instruction of Architect/EIC. Sample mock shall

be approved from Architect/ Client. Material Test certificate shall be submitted by the contractor. (Excluding PCC and RCC)

Providing & supplying Field soil and Spreading and mixing of soil & silt as per approved By engineer In charges . Rupees Six Hundred Eighty Eight And Paise Sixty

Proving & farm Yard Manure and labour for spreading and mixing farm yard Rupees One Thousand Two Hundred Thirty Eight

And Paise Six Only

Supplying well grown shrub plants of average height 3' to 4' and planting in 300x300x300mm size pits by mixing of FYM & existing soil

in ration 1:3 with soil, pesticide & insecticides. Plant should be disease free and fungus free 8"x10" polythene bag. Plastic bag or pots

should be removed carefully and soil around the roots should not be dropped or disturbed much. Bill shall be placed after 45 days of Rupees One Thousand One Hundred Thirty Three

plantation of shrubs. Mortality rates to be inclusive. Work shall be done as shown in the drawing or as directed and approved by And Paise Six Only

EIC/Architect. The ground coverage should be dence and uniform throuout the planting area.

Supply and planting of tree of specified variety including excavation of pit 600x 600x600mm depth mixing of FYM & existing soil in ratio

1:3 termite treatment and planting of plants (height 8' to 10' above bags/pots). Soil mounts 4'-8" in size. Tree plantation should be

carried on neatly accurately and with perfection as per drawing and instruction given by EIC. Plastic bags or pots should be removed

carefully and soil around the roots should not be dropped or disturbed much. Bill shall be placed after completion of maintenance period Rupees Seven Hundred Fifty Nine And Paise

but not before stabilizing the hedges. Rates for mortality to be inclusive. Providing and fixing tripod made of wooden ball, height 1.5m. Eighty Nine Only

Top bracket to be 300x300mm leg embedded in ground up to 300mm and to have tar coat. Work shall be done as shown in the drawing

or as directed and approved by EIC.

Proving & fixing SEMI Carpet lawn as approved by EIC/Architect. Rupees One Hundred Twenty Two And Paise Sixty

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Supply and planting box hedge shrub of average height 1' to 2' by providing and fixing FYM @ rate of 0.06 cmt/pit with soil pesticide &

insecticides. Plants shoud be disease free and fungus free in 6"x8" polythene bag. Plastic bags or pot should be removed carefully and

soil around the roots should not be dropped or disturbed much. Bill shall be placed after completion of maintenance period but not Rupees One Thousand One Hundred Thirty Three

before stabilizing the shrubs. Mortality rates to be inclusive. Work shall be done as shown in the drawing or as directed and approved by And Paise Six Only

EIC. The ground coverage should be dense and uniform throughout the planting area.

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2 of the following

internal diameter with collars and butt ends prepared for collar joints including testing Rupees Six Hundred Seventy Seven And Paise

of joints complete.(D) 300mm Ninety Four Only

Providing & fixing ficas toparies 1.5 to 1,8 m (h) A as per approved by EIC / Architect. Rupees Eighteen Thousand Five Hundred Eighty

Providing ficas golden bushi -0.90 m as per approved by EIC / Architect. Rupees Two Hundred Ninety And Paise Eighty

Providing date palm -3.00 to 3.60 m (h) as per approved by EIC / Architect.

171 5 Each ₹ 11,615.00 Rupees Eleven Thousand Six Hundred Fifteen Only ₹58,075.00

Providing ficas safari -black bushi for hedge -0.90 to 1.2 m(h) as per approved by EIC / Architect. Rupees Four Hundred Sixty Four And Paise Sixty

bismarckia palm at lawn area -2.40 to 3 m as per approved by EIC / Architect. Rupees Seven Thousand Five Hundred Forty Nine

And Paise Seventy Five Only

Double Swing – 1Nos.

Length – 10-15 ft. Width – 5-7 ft, Height – 9-12 ft. All round and rectangular pipes

are GI or CR, ISI make Gauge 14 gauge, 2 coating are red oxide and final paint of

Rupees One Lakh(s) Twenty Five Thousand Four

174 1 PU/ Epoxy/ industrial paint, Nut bolt GI Bearing heavy, (branded, as per buyer each ₹ 125,442.00 ₹125,442.00

Hundred Forty Two Only

approval) FRP seat thickness 4-5mm, Swing assembly 6mm chain with all

accessories and fixing.

Wave Slides – 1Nos.

Wave Slide-16*4Ft. L-10ft,Platform 6ft,Structure 60mm,50mm GI Pipe. Powder Rupees One Lakh(s) Twenty One Thousand Nine

coated. Slide roller LLDPE Plastic 52mm rolls Hundred Fifty Seven And Paise Fifty Only

Seesaws Two Sets – 2 Nos.

1 normal see saw, 1 spring Length – 8-10 ft., Width – 2-3 ft., Height – 2-3 ft. All

round and rectangular spring legs are GI or CR, ISI make Gauge 14 gauge,

coating are red oxide and final paint of industrial paint, Nut bolt GI, FRP thickness Rupees Eighty Two Thousand Two Hundred Thirty

5-6 mm All round and rectangular pipes are GI or CR, ISI make Gauge 14 gauge, 2 Four And Paise Twenty Only

coating are red oxide and final paint of PU/ Epoxy/ industrial paint, Nut bolt GI

Bearing heavy, (branded, as per buyer approval)

Designing, providing, fixing & erection STONE FOUNTAIN complete inclusive of all material, labor, wastages, necessary tools &

tackles, adhesives, required hardware, accessories, Carving, Any type of framing work as per required, Necessary civil work if required,

foundation if required as per design, ligting if required and work complete including all type of material, fittings, fixtures, Finish, loading,

Rupees One Lakh(s) Seventy Four Thousand Two

177 1 unloading, transporation, all leads, accessories, all floor, all levels, all heights etc. complete as per drawings, specifications & instruction job ₹ 174,225.00 ₹174,225.00

of Client/EICProviding & Fixing Street Decor Stone Fountain Garden as per given drawing details and approved By engineer In charge Hundred Twenty Five Only

Designing, providing, fixing & erection bench complete inclusive of all material, labor, wastages, necessary tools & tackles, adhesives,

required hardware, accessories, Carving, Any type of framing work as per required, Necessary civil work if required, foundation if

required as per design, ligting if required and work complete including all type of material, fittings, fixtures, Finish, loading, unloading,

transporation, all leads, accessories, all floor, all levels, all heights etc. complete as per drawings, specifications & instruction of Rupees Seventy Five Thousand One Hundred

Client/EIC. Providing & placing Stone circular seating as per ref images or drawing. Material: Canadian wood top finish with metal Ninety Four And Paise Fifty Only

4 Feet Length X 1.5 Feet Wide X 1.75 Feet High X 3 Benches + 2.5 Feet High Table X 3 Feet Diameter

Proving & Fixing Concrete Grey Grass Paver Blocks, Size: 300 X 300 Mm, Thickness: 60 Mm as per approved by Engineer in Charge. Rupees One Thousand One Hundred Thirty Six

And Paise Four Only

Providing and fixing pre-cast Rubber Dye/ steel Dye inter locking concrete block 60mm thick with grade of concrete M300 pnumatic

compressed/ vibrated mechanically and as per approved design Confirming to IS 15658: 2006 including 35 mm Sand layer for levelling Rupees Six Hundred Ninety Three And Paise

and filling the joint with sand in proper line and level as per guidlines of IRC: SP 63-2018 etc. Complete. Seventy Six Only

loose natural stone of uneven shape & size of 0.5 to 2 cum Rupees Five Thousand Two Hundred Twenty Six

And Paise Seventy Five Only

Proving & fixing Kutch Lippan Mud art as per drawing / approved by Engineer In charges/ Architect Rupees Six Thousand Eight Hundred Seventy Four

And Paise Six Only

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

THATCH ROOF : Providing and fixing thatch roof on kacchi bhunga as per drawing with approved material and all neccesory items for

fixing including scaffhoiding for all heights.The overall assembly, finishing, and installation shall be executed as per the approved

drawings and under supervision of the Engineer-in-Charge (EIC) and Architect. Thatch roof of

a minimum pitch of 45 degrees, a minimum thickness of 175-250 mm (or 16 inches), and the use of well-compacted materials.The

minimum thickness of the face work (the visible layer) is 16 inches (approx. 400 mm) when measured from the face of the batten at a Rupees One Thousand Four Hundred Ninety Eight

right angle to the rafter.The thatch must be well-compacted for better durability and to slow the spread of fire.The thatch must be well- And Paise Thirty Three Only

compacted for better durability and to slow the spread of fire.The timber/MS for rafters, beams, and other structural elements must

meet specific standards, such as SABS or SANS specifications, and be properly treated.A separate, thicker ridging layer of about 75-80

mm is applied over the last fixing of the main coat to prevent water from following the fixings into the thatch.

Designing, providing, fixing & erection bench complete inclusive of all material, labor, wastages, necessary tools & tackles, adhesives,

required hardware, accessories, Carving, Any type of framing work as per required, Necessary civil work if required, foundation if

required as per design, ligting if required and work complete including all type of material, fittings, fixtures, Finish, loading, unloading, Rupees Eight Thousand Three Hundred Five And

184 8 transporation, all leads, accessories, all floor, all levels, all heights etc. complete as per drawings, specifications & instruction of Nos ₹ 8,305.23 ₹66,441.84

Paise Twenty Three Only

Client/EIC. Providing & placing Stone seating as per ref images or drawing. Material: Canadian wood top finish with metal supports.

Feet Length X 1.5 Feet Wide X 1.75 Feet High

Providing and fixing pre-cast Rubber Dye/ steel Dye inter locking concrete block 80-100mm thick and 450mm heightwith grade of

concrete M300 pnumatic compressed/ vibrated mechanically and as per approved design Confirming to IS 15658: 2006 including 35 Rupees Three Hundred Nineteen And Paise Sixty

mm Sand layer for levelling and filling the joint with sand in proper line and level as per guidlines of IRC: SP 63-2018 etc. Complete. One Only

Proving & supplying & Fixing Lateral pipe 16 mm

186 5000 Mtr ₹ 13.08 Rupees Thirteen And Paise Eight Only ₹65,397.50

Providing and fixing 75 MM PVC Flush valve as per approved By Engineer in charge Rupees One Hundred Thirty And Paise Twenty

Providing and fixing 75 MM PVC Ball valve as per approved By Engineer in charge

188 3 Nos ₹ 1,616.00 Rupees One Thousand Six Hundred Sixteen Only ₹4,848.00

Piping Network - Providing of PVC pipes (IS 4985), and fittings & Accessories like tees, elbows, bends, junctions, Reducers etc; as

required/ diected at site Rupees Two Hundred Fifty Seven And Paise Fifty

a) PVC Pipe 90mm x 6kg/ cm2 as per approved By Engineer in charge Five Only

d) PVC Pipe 75mm x 6kg/ cm2 as per approved By Engineer in charge Rupees One Hundred Seventy Six And Paise

Seventy Five Only

e) PVC Pipe 63mm x 6kg/ cm2 as per approved By Engineer in charge Rupees One Hundred Twenty Four And Paise

Twenty Three Only

Providing of Gear driven Pop-up Sprinkler 5" with flow shut off device (5" Pop Up hight from Bottom to Centre of Discharging Nozzle)

Rupees Four Thousand Two Hundred Ninety

192 10 from (12 to 24 Mtr Radius) with SOD Cup & Check Valve, Slip Clutch Mechenism complete with required nozzle Nos ₹ 4,297.55 ₹42,975.50

Seven And Paise Fifty Five Only

Providing of Gear driven Pop-up Sprinkler 5" with flow shut off device (5" Pop Up hight from Bottom to Centre of Discharging Nozzle)

from (8 to 16 Mtr Redius) with Check Valve, Slip Clutch Mechenism complete with required nozzle Rupees One Thousand Four Hundred Fifty Two

And Paise Thirty Eight Only

providing & fixing 2"p v c union Valve as per approved By Engineer in charge Rupees Five Hundred Fifty Five And Paise Fifty

Providing and laying white glazed tiles 300x600 mm 6mm thick in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with white cement slurry selected as per attached detail architectural drawing no.09 and materal Rupees One Thousand One Hundred Twenty

selection list. Seven And Paise Forty Eight Only

Providing and fixing C.I Manhole cover 0.60 mt x 0.45 mt size having weight not less than 35 Kg Rupees Nine Hundred Fifty Eight And Paise

Providing & Fixing iron steps of size 500mm x 150mm x 22.5 mm and painting with two coats of anticorrosive paint etc. complete. Rupees Two Hundred Seven And Paise Sixty Five

Providing and constructing and junction chamber of size 0.45x0.45x0.45 mt. including necessary excavating 23 Cum. brickwall, beding

CC 1:2:4, top RCC slab, 15mm thick plaster and connection of rain water pipes as per detail drawings and as directed by engineer – in ₹

Rupees Two Thousand Seven Hundred Thirty

– charge. Three And Paise Sixty Three Only

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and

other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall

be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm

length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such Rupees Nine Hundred Eighteen And Paise Sixty

as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. Six Only

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and

other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall

be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 160 mm diametre x 210 mm

length x 196 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such Rupees Eight Hundred Thirty Four And Paise

as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. Thirty Eight Only

Providing rain water harvesting filter chamber of 2.10x2.10 Mt size and 1.20 Mt depth including necessary excavation 23cm brickwall

beding CC 1:2:4 top RCC slab. 15mm thick plaster and filling up to 0.30 mt Kapachi 25 to 40mm size 0.30 mt. Kapachi 10 to 12mm

Rupees Thirteen Thousand Seven Hundred Fifty

201 1 size and coarse sand 0.60 mt. etc. as directed. Nos. ₹ 13,754.61 ₹13,754.61

Four And Paise Sixty One Only

Driling of bore 215 mm Dia strata ( 0 to 30 metre) Indcluding lowering and fixing of 175 mm dia ERW pipes / PVC pipe up to required

Rupees Three Hundred Thirty And Paise Twenty

202 200 depth and furthether driling of 165 mm dia bore hole in rocky strata DTH ring indluding fiting etc. complete (As per Zone) rmt ₹ 330.27 ₹66,054.00

Supply of 175mm dia UPVC casing pipe :Cstype: of si marked approved qulity

203 150 rmt ₹ 915.06 Rupees Nine Hundred Fifteen And Paise Six Only ₹137,259.00

Providing standerd lenth ISI mark high density polythenc HDPE pipes suitale for potable water as per IS speecification 4984/1995

204 150 ncluding all charges etc,cmplete 40 mm dia (10 kg / Sqm Cm.PE 80) rmt ₹ 55.55 Rupees Fifty Five And Paise Fifty Five Only ₹8,332.50

Providing Flat PVC cable for submersible pumnp as per detail specification as per GWSSB R/C Size of 4.00Sq.mm. Rupees One Hundred Twenty Four And Paise

Twenty Three Only

Providing and fixing M.S.Clamp with 5mm thick M.S.plate bore plug including arrangement with nuts,bolts and lock nuts etc.complete. Rupees One Thousand Two Hundred Twenty

Seven And Paise Eighty Two Only

207 4 Proving & fixing Kiosk finishing as per drawing / approved by Engineer In charges/ Architect Nos ₹ 50,500.00 Rupees Fifty Thousand Five Hundred Only ₹202,000.00

Lotus Sculpture (FRP)

The proposed Lotus Sculpture, measuring approximately 7 feet in height and 5 feet in diameter, will be fabricated using high-grade

Fiber Reinforced Polymer (FRP) of 5 mm thickness. The sculpture will depict a stylized blooming lotus form, artistically finished to

represent purity and natural elegance, harmonizing with the thematic landscape of the play area.

An internal Mild Steel (MS) structural framework made of ISMB/ISA/pipe sections will support the FRP shell, ensuring adequate

strength and rigidity against wind and handling loads. The internal frame will be fixed to a base plate foundation anchored in PCC Rupees Five Lakh(s) Eighty Thousand Seven

(1:2:4) concrete block of adequate size to maintain stability. Hundred Fifty Only

All MS components will be treated with anti-corrosive red oxide primer and enamel paint, while FRP surfaces will be finished with UV-

resistant, weatherproof, and non-toxic pigments. The sculpture surface will have smooth rounded profiles for safety and aesthetic

continuity, with artistic shading to enhance visual appeal.

The overall assembly, finishing, and installation shall be executed as per the approved drawings and under supervision of the Engineer-

in-Charge (EIC) and Architect.

Haat Circle Sculpture (FRP)

The Haat Circle Sculpture, rising 10.7 feet high and 5 feet in diameter, symbolizes the vibrant cycle of creation, exchange, and

community spirit that defines traditional Indian haats (marketplaces). Crafted entirely from high-strength Fiber Reinforced Polymer

(FRP) of 5 mm thickness, it merges artistic expression with lasting durability suitable for outdoor display.

The circular form will feature fluid, handcrafted contours, representing the seamless bond between artisans and nature. Beneath its

sculptural surface lies a concealed Mild Steel (MS) frame, fabricated from ISMB/ISA sections with cross-bracing to withstand

environmental and dynamic forces. The base will be fixed on a reinforced concrete footing (PCC 1:2:4) with anchoring bolts and plates Rupees Four Lakh(s) Twenty Nine Thousand Two

209 1 for firm stability. JOB ₹ 429,250.00 ₹429,250.00

Hundred Fifty Only

To ensure longevity, all MS components will be coated with anti-corrosive primer and enamel finish, while the FRP exterior will be

treated with UV-protected, weather-resistant pigments. The surface will be smooth and child-safe, finished in dual earthen tones —

matte terracotta and ivory mist — with optional accent lighting to highlight its circular geometry at night.

The design, fabrication, and installation will strictly follow the approved detailed drawings and will be carried out under the supervision of

the Engineer-in-Charge and the Architect, ensuring both artistic integrity and structural safety.

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Hand Pump Sculpture (FRP)

The proposed Hand Pump Sculpture, measuring approximately 5 feet in height, will be artistically crafted from Fiber Reinforced Polymer

(FRP) of 5 mm thickness, designed to realistically represent the traditional Indian hand pump form while ensuring long-term outdoor

The sculpture will be fabricated over a concealed Mild Steel (MS) internal frame made from ISMB/pipe sections, providing stability and

rigidity to support the FRP cladding. The internal frame will be firmly anchored to a PCC (1:2:4) concrete base using MS base plates

and anchor bolts.

210 1 JOB ₹ 202,000.00 Rupees Two Lakh(s) Two Thousand Only ₹202,000.00

All MS components will be finished with anti-corrosive primer and enamel paint, and the FRP exterior will be coated with UV-stabilized,

weatherproof, and non-toxic finishes in metallic grey-green or rustic iron tones to replicate the authentic look of an old village hand

The surface will have smooth, child-safe edges and fine texturing to resemble cast iron detailing, with the option of a decorative water

trough or base stone element for realistic presentation. All works shall be executed as per approved drawings and under the supervision

of the Engineer-in-Charge (EIC) and Architect.

Bullock Cart Sculpture (FRP)

The proposed Bullock Cart Sculpture, measuring approximately 6.6 feet in height and 15 feet in length, will be an artistic recreation of

the traditional Indian rural bullock cart — symbolizing agrarian heritage and simplicity of village life. The sculpture will be fabricated

entirely in high-grade Fiber Reinforced Polymer (FRP) with a 5 mm uniform thickness, ensuring durability, weather resistance, and fine

detailing suitable for outdoor public display.

The cart body, wheels, yoke, and decorative elements will be individually sculpted in FRP with realistic textures that replicate the

appearance of natural wood and iron fittings. Each component will be supported by a concealed Mild Steel (MS) structural framework

made from ISMB/ISA/pipe sections, internally braced for strength and anchored securely on a PCC (1:2:4) concrete foundation with MS

211 1 base plates and bolts for stability. JOB ₹ 1,010,000.00 Rupees Ten Lakh(s) Ten Thousand Only ₹1,010,000.00

All MS components shall receive anti-corrosive primer and enamel finish, while FRP surfaces will be coated with UV-resistant, non-toxic

pigments in earthen wood tones, metallic greys, and subtle rustic highlights. The sculpture will feature smooth, rounded edges to

ensure safety and will be designed to withstand environmental exposure without degradation.

Optional bull figures, wooden-texture base platform, or natural stone flooring integration can be added to enhance contextual realism.

The fabrication, finishing, and installation shall strictly adhere to approved design drawings and be executed under the supervision of the

Engineer-in-Charge (EIC) and the Architect, ensuring aesthetic quality and structural safety.

Cart Sculpture (FRP)

The proposed Cart Sculpture, measuring approximately 6.6 feet in height and 9 feet in length, will be an artistic recreation of the

traditional Indian rural cart — symbolizing agrarian heritage and simplicity of village life. The sculpture will be fabricated entirely in high-

grade Fiber Reinforced Polymer (FRP) with a 5 mm uniform thickness, ensuring durability, weather resistance, and fine detailing

suitable for outdoor public display.

The cart body, wheels, yoke, and decorative elements will be individually sculpted in FRP with realistic textures that replicate the

appearance of natural wood and iron fittings. Each component will be supported by a concealed Mild Steel (MS) structural framework Rupees Five Lakh(s) Eighty Thousand Seven

212 1 made from ISMB/ISA/pipe sections, internally braced for strength and anchored securely on a PCC (1:2:4) concrete foundation with MS JOB ₹ 580,750.00 ₹580,750.00

Hundred Fifty Only

base plates and bolts for stability.

All MS components shall receive anti-corrosive primer and enamel finish, while FRP surfaces will be coated with UV-resistant, non-toxic

pigments in earthen wood tones, metallic greys, and subtle rustic highlights. The sculpture will feature smooth, rounded edges to

ensure safety and will be designed to withstand environmental exposure without degradation.

The fabrication, finishing, and installation shall strictly adhere to approved design drawings and be executed under the supervision of the

Engineer-in-Charge (EIC) and the Architect, ensuring aesthetic quality and structural safety.

Well Sculpture (FRP)

The proposed Well Sculpture, measuring approximately 5 feet in height and 2.5 feet in diameter, will be artistically designed in Fiber

Reinforced Polymer (FRP) of 5 mm thickness, replicating the appearance of a traditional stone well. The circular form will be cast with

hand-crafted stone-texture detailing and natural colour shading to evoke realism while maintaining lightweight durability.

A concealed Mild Steel (MS) internal frame of ISMB/pipe sections will support the FRP shell, providing adequate strength and rigidity.

The structure will be anchored on a PCC (1:2:4) concrete base with MS base plates and anchor bolts for stability. Rupees Two Lakh(s) Ninety Two Thousand Nine

213 1 All MS elements will be coated with anti-corrosive primer and enamel paint, while the FRP exterior will receive UV-resistant, non-toxic, JOB ₹ 292,900.00 ₹292,900.00

weatherproof coating in natural grey-stone or terracotta finish. The top edge will be rounded and child-safe, and optional FRP bucket

with rope detailing can be added for enhanced realism.

All works shall conform to approved design drawings and be carried out under the supervision of the Engineer-in-Charge (EIC) and

Architect, ensuring both artistic authenticity and structural safety.

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Wall Corner (FRP)

The proposed Wall Corner Installation, measuring approximately 6.6 feet in height and 15 feet in length, will be constructed using Fiber

Reinforced Polymer (FRP) with a 5 mm uniform thickness, designed to combine artistic expression with structural endurance. The wall

will serve as a thematic backdrop or boundary feature, crafted with hand-textured relief patterns such as stone masonry, mud plaster, or

cultural motifs reflecting the site’s aesthetic identity.

The FRP surface will be mounted on a concealed Mild Steel (MS) subframe fabricated from ISMB/ISA/pipe sections, internally braced

for stiffness and stability. The base will be anchored securely to a PCC (1:2:4) foundation using MS base plates and anchor bolts to

214 1 resist wind and impact loads. JOB ₹ 707,000.00 Rupees Seven Lakh(s) Seven Thousand Only ₹707,000.00

All MS components shall be treated with anti-corrosive primer and enamel coating, while the FRP exterior will receive UV-stabilized,

weatherproof, and non-toxic finishing coats in natural earthy or stone shades. The surface will have rounded, safe edges, and optional

embedded lighting, mural inlays, or relief carvings can be incorporated for artistic enhancement.

All fabrication, surface treatment, and installation shall strictly conform to approved architectural and structural drawings and will be

executed under the supervision of the Engineer-in-Charge (EIC) and Architect, ensuring both aesthetic harmony and structural integrity.

Fort Wall (FRP)

The proposed Fort Wall Installation, measuring approximately 13 feet in height and 16 feet in length, will be designed to recreate the

aesthetic grandeur of traditional Indian fort architecture while ensuring modern material strength and weather resistance. The wall will

be fabricated from high-quality Fiber Reinforced Polymer (FRP) with a 5 mm thickness, artistically textured to replicate stone masonry,

battlements, and carved detailing typical of heritage forts.

An internal Mild Steel (MS) framework, constructed from ISMB/ISA/pipe sections, will support the FRP cladding and distribute loads

evenly. The structure will be anchored on a PCC (1:2:4) concrete base with MS base plates and anchor bolts, providing stability against Rupees Ten Lakh(s) Sixty Thousand Five Hundred

wind and environmental stresses. Only

All MS members will be coated with anti-corrosive red oxide primer and enamel finish, while the FRP exterior will receive UV-resistant,

weatherproof, non-toxic coatings in natural sandstone or laterite stone shades. The surface will feature smooth, safe edges and optional

parapet crenellations or arched openings to enhance realism and visual depth.

The entire fabrication, texturing, finishing, and installation shall be executed in accordance with approved architectural and structural

drawings, under the supervision of the Engineer-in-Charge (EIC) and the Architect, ensuring both artistic authenticity and structural

Camel Cutout Sculpture (FRP)

The proposed Camel Cutout Sculpture, measuring approximately 8 feet in height and 8 feet in length, will be fabricated from high-

strength Fiber Reinforced Polymer (FRP) of 5 mm thickness, designed as a stylized silhouette of a camel — symbolizing the desert

heritage and cultural identity of Kutch and western India.

The sculpture will feature a flat relief or semi-profiled form, crafted with precise contour detailing and smooth surface finish. The FRP

form will be reinforced on the rear side with a concealed Mild Steel (MS) frame made from ISMB/pipe sections, providing structural

rigidity and resistance to wind or accidental impact. The base will be anchored into a PCC (1:2:4) foundation using MS base plates and Rupees Two Lakh(s) Ninety Two Thousand Nine

216 1 anchor bolts for stability. JOB ₹ 292,900.00 ₹292,900.00

All MS components shall receive anti-corrosive primer and enamel coating, while FRP surfaces will be finished with UV-protected,

weatherproof, and non-toxic paints in natural camel beige, ochre, and brown tones to enhance realism. The edges will be smooth and

child-safe, and optional engraved or printed regional patterns may be incorporated to reflect local artistry.

The fabrication, surface finishing, and installation will strictly follow approved architectural and structural drawings, executed under the

supervision of the Engineer-in-Charge (EIC) and Architect, ensuring artistic authenticity, safety, and long-term performance.

Selfie Frame (FRP)

The proposed Selfie Frame Structure, measuring approximately 11 feet in height and 15 feet in length, will serve as an engaging public-

interaction element designed for photo opportunities. The frame will be sculpted in Fiber Reinforced Polymer (FRP) of 5 mm thickness,

combining aesthetic appeal with strength, weather resistance, and low maintenance.

The frame will be fabricated over a concealed Mild Steel (MS) framework made from ISMB/ISA/pipe sections, designed to safely

support the FRP shell and withstand outdoor wind loads. The structure will be securely anchored to a PCC (1:2:4) concrete base using

MS base plates and anchor bolts for permanent stability. Rupees Five Lakh(s) Eighty Thousand Seven

217 1 All MS members will be coated with anti-corrosive primer and enamel paint, while the FRP exterior will be finished with UV-stabilized, JOB ₹ 580,750.00 ₹580,750.00

Hundred Fifty Only

non-toxic coatings in vibrant dual tones—such as terracotta and ivory, sandstone yellow and turquoise, or as per site theme. The

surface edges will be smooth and child-safe, with optional engraved branding, project logo, or thematic motifs integrated into the design.

Provision may be made for concealed LED edge lighting or spotlighting to highlight the frame at night, enhancing visitor interaction. The

entire installation shall be executed as per approved architectural and structural drawings, under the supervision of the Engineer-in-

Charge (EIC) and Architect, ensuring aesthetic visibility, safety, and long-term durability.

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Providing , creating and designing Mural Art with all materials including Ferro cement, Fibre, Resin- Hardener mix Material,

FRP,glass,Metal , mosaic tiles, SS material, metallic sheets, wooden batons ,grc etc. in different 2D/3D colors and shade of required

thickness and shape creating as per detailed drawing Approved by architect, including providing and using adhesive, white cement,

color pigments ,and permanent colors with all labours (including necessary Scaffolding), up to twenty meter height, Achieving required

look and picture as directed by architect..The rate also includes for all necessary items required to complete the job as per design

/drawing and consultant's instructionsThe mural is crafted using ferro-cement, a durable and versatile material, with a thickness of Rupees Ten Thousand Six Hundred Twenty Three

50mm, depth , The process begins with creating a wire mesh framework, which is then layered with a mixture of cement, sand, and And Paise Eighteen Only

water. The ferro-cement mixture is applied in multiple layers, allowing each layer to set before adding the next. The mural's design as

per approved by EIC/ Architect, is carefully sculpted and molded into the ferro-cement layers. Once the final layer is set, the mural is

finished with a protective coating to enhance its durability and weather resistance. The resulting mural is a stunning and long-lasting

work of art, showcasing the ancient story in a modern and innovative medium.

proposed Warli Design Wall Mural, as per drawing, will be a continuous artistic frieze celebrating the tribal art heritage of Gujarat. The

mural will feature traditional Warli motifs—depicting human figures, animals, trees, and rhythmic life scenes—crafted in Fiber

Reinforced Polymer (FRP) of 5 mm thickness or in mixed media (FRP + relief paint finish), depending on site conditions and visual

Each mural panel will be produced with fine embossed detailing, capturing the minimal linear beauty of Warli art through raised and Rupees One Thousand Eight Hundred Seventy

recessed forms. The panels will be mounted on a Mild Steel (MS) subframe of flat and pipe sections, anchored to the existing wall using Four And Paise Fifty Six Only

MS clamps, base plates, and chemical fasteners. The entire system will rest on a PCC (1:2:4) backing or plastered masonry surface for

uniform alignment.

All MS elements will be treated with anti-corrosive primer and enamel paint, while FRP surfaces will be coated with UV-resistant, non-

toxic, weatherproof finishes. The color palette will use earthy white-on-terracotta or ivory-on-brown combinations, representing the

authentic Warli aesthetic while maintaining high outdoor visibility.

Providing & fixing the sheet of 4mm of thickness and upto 300mm wide with 2 coat of yellow oxide and 2 coat of color and pu epoxy.

Rupees Four Thousand Eight Hundred Seventy

220 30 Color,drawing/pattern as per drawing approved by engineer incharge/ Architect. including All finishing items and scaffholding, screw, Rmt ₹ 4,878.30 ₹146,349.00

Eight And Paise Thirty Only

nails, fixers and all necessory item required for finish.

Providing & fixing the sheet of 4mm of thickness and 150- 300mm wide with cnc design design with 1 coat of yellow oxide and 2 coat of

221 30 color and pu epoxy. Color,drawing/pattern as per drawing approved by engineer incharge/ Architect. including All finishing items and Rmt ₹ 6,090.30 Rupees Six Thousand Ninety And Paise Thirty Only ₹182,709.00

scaffholding, screw, nails, fixers and all necessory item required for finish.

Stone Sculpture

Providing & Fixing the proposed Stone Sculpture made of hard marble, granite or sand stone of required size and shape , including all

necessory fixers with required base for fix. measuring approximately 600-900mm in height and 1200-1500mm in length,600-750mm in

width . The sculpture will depict as required form, artistically finished to represent purity and natural elegance, harmonizing with the

222 6 thematic landscape of the area. Nos ₹ 101,000.00 Rupees One Lakh(s) One Thousand Only ₹606,000.00

The sculpture surface will have smooth rounded profiles for safety and aesthetic continuity, with artistic shading to enhance visual

The overall assembly, finishing, and installation shall be executed as per the approved drawings and under supervision of the Engineer-

in-Charge (EIC) and Architect.

The proposed wall painting, measuring required height and width on 2 coat primer and paint with acrylic / enamel paint exterior grade

long lasting of approved brand as per required for design approved by architect/EIC with all required tool for painting & including

223 172 scaffholding as required . Sqm ₹ 1,212.00 Rupees One Thousand Two Hundred Twelve Only ₹208,464.00

The overall finishing Semi gloss/satin shall be as per the approved drawings and under supervision of the Engineer-in-Charge (EIC) and

Providing & fixing M.S. Grill for with necessary fitting with necessary fitting with one coat of primer and two coat oil paint as per details

224 630 given by architect instructions given by engineer in charge Kg ₹ 150.09 Rupees One Hundred Fifty And Paise Nine Only ₹94,556.70

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Providing and Installation of Double Seater Sofa made with teak wood, all wood shall be of first class seasoned hard wood teak

(CP).Legs shall be of 70mmx35mm in section made to shape as shown on drg. Wooden arm shall be made to shape out of

35mmx70mm in section teakwood. Front and side rails shall be of 35mmx100mm in section teakwood.40mmx40mm in section

teakwood bearers shall be provided at the bottom of seatcover over which 50mm x20mm wooden battens, shall be fixed equally spaced

in the long pieces. Back shall be made of frame of rails and styles of 70mmx35mm in section teakwood.

(a) The seat and back cushion shall be of 100 mm to 150 mm thick, 40 Density and of Make:- Sleepwell / Springwell Rupees Twenty One Thousand Seven Hundred

225 1 (b) The cushion cover should be of Make : D’ Décor / Neptune / Raymonds / Vimal or equivalent brand, Colour of tapestry shall be as NO ₹ 21,715.00 ₹21,715.00

directed by Architect/ Site Incharge as per selection/ approval.

(c) All polish work shall be done in Melamine finish. Make of Polish shall be Melamine by Asian Paints / Nerolac / Berger. Colour of

Polish shall be as directed by Architect/ Site Incharge as per selection/ approval.

Note: Sample approvals needs to be done for the same, once it's finalized further quantities to be

executed after approval.

Providing and Installation of Three Seater Sofa made with teak wood, all wood shall be of first class seasoned hard wood teak

(CP).Legs shall be of 70mmx35mm in section made to shape as shown on drg. Wooden arm shall be made to shape out of

35mmx70mm in section teakwood. Front and side rails shall be of 35mmx100mm in section teakwood.40mmx40mm in section

teakwood bearers shall be provided at the bottom of seatcover over which 50mm x20mm wooden battens, shall be fixed equally spaced

in the long pieces. Back shall be made of frame of rails and styles of 70mmx35mm in section teakwood.

(a) The seat and back cushion shall be of 100 mm to 150 mm thick, 40 Density and of Make:- Sleepwell / Springwell Rupees Twenty Nine Thousand Seven Hundred

(b) The cushion cover should be of Make : D’ Décor / Neptune / Raymonds / Vimal or equivalent brand, Colour of tapestry shall be as Forty Four And Paise Fifty Only

directed by Architect/ Site Incharge as per selection/ approval.

(c) All polish work shall be done in Melamine finish. Make of Polish shall be Melamine by Asian Paints / Nerolac / Berger. Colour of

Polish shall be as directed by Architect/ Site Incharge as per selection/ approval.

Note: Sample approvals needs to be done for the same, once it's finalized further quantities to be

executed after approval.

Providing and Installation of Center Table made with teak wood, all dimension, shape and size shall be shown in drwgs. All wooden

work shall be of 1st class seasoned hard teak wood with melamine polish/ finish. Top shall be of 18mm thick Italian/ Arificial stone /

Quartz as per selection or sample approval. Expose surface of teakwood shall be polished in melamine finish with color tone as

approved by Architect / Site Incharge. Make of Polish shall be Melamine by Asian Paints / Nerolac / Berger and strictly as per Rupees Fifteen Thousand Five Hundred Fifty Four

227 1 manufacturer’s instructions. PVC/hard rubber shoe of 1st quality shall be screwed all legs. NOTE : Entire polish work shall be done in NO ₹ 15,554.00 ₹15,554.00

the presence of Engr-in-Charge at site only. Rest all other details & dimensions as shown in drwgs.

approvals needs to be done for the same, once it's finalized further quantities to be executed after approval.

Providing and Installation of Corner Table made with teak wood, all dimension, shape and size shall be shown in drwgs. All wooden

work shall be of 1st class seasoned hard teak wood with melamine polish/ finish. Top shall be of 18mm thick Italian/ Arificial stone /

Quartz as per selection or sample approval. Expose surface of teakwood shall be polished in melamine finish with color tone as

approved by Architect / Site Incharge. Make of Polish shall be Melamine by Asian Paints / Nerolac / Berger and strictly as per Rupees Nine Thousand Eight Hundred Ninety

228 2 manufacturer’s instructions. PVC/hard rubber shoe of 1st quality shall be screwed all legs. NOTE : Entire polish work shall be done in NO ₹ 9,898.00 ₹19,796.00

the presence of Engr-in-Charge at site only. Rest all other details & dimensions as shown in drwgs.

approvals needs to be done for the same, once it's finalized further quantities to be executed after approval.

CHAIR (High Back): Providing and supplying Conference High back chair the seat & back are made of 1.20cm thick hot pressed

plywood upholstered with fabric and moulded PU foam, together with moulded seat & back covers. The back foam should be designed

with contoured lumber support for extra comfort. The size of chair 45cmx53cm (Back side) and 52cmx48cm (seat size). The PU foam Rupees Eleven Thousand Eight Hundred Fifty Six

should be moulded with density =45 ± 2 kg/m3 .with One piece armrests. The armrests are scratch and weather resistant. The And Paise Fifty Two Only

permanent contact mechanism is designed with 360° revolving type, with pneumatic height adjustment.

Manager Table: Providing and fixing counter/table size of 900 mm-1200 mm L x 700 mm W x 1000 mm H made out of 18mm Marine

Ply as per design inner cladded with 1.0mm thk laminate & the edges to be finished with necessary mouldings(as per design), etc.

Special 6" drawer to be made with dividers of 12mm BWR plywood The front of the drawer made out of 19mm BWR block board

finished with 4.0mm veneer, sides 12mm BWR plywood and bottom to be made of 6mm BWr plywood .The Facia Jali to be made with

Corian CNC design as per drawing with back light Provision,the drawers and shutters to be provided with necessary drawer sliding Rupees Twenty One Thousand Seven Hundred

230 1 channels,handles, hinges, locks etc.Wire manager, legrest,Redymade black powder coated CPU trolly, keyboard tray, tea tray finished NO ₹ 21,755.40 ₹21,755.40

Fifty Five And Paise Forty Only

with 1.0mm laminate to be provided. 3" x 1/2" white beach white ceader skiriting to be provided with natural polish in all visible areas.

18-20 mm thk Artificial Stone / Quartz with bullnosed moulding (double) to be provided at counter top, the work should be completed as

per specification. The work to be completed as per specification ,design and approval of the Architect /EIC as per detailed drawings and

material Selection.

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

SINGLE BED FOAM MATTRESS: Mattress made from Bonded foam with softy sandwich layer, Foam mattress made from standard

quality bonded foam of 100mm thick with 50 mm thick softy foam which is from standard make, Both foam are fix with standard glue

with both side kwilted cotton fabric cover, Bed all edges are stitch with pipeing finish with standard finishing, Cotton kwilt of Dark colour Rupees Three Thousand Six Hundred Thirty Six

decorative shade require. Only

Metress Size : 78" x 36" x 4"

TEAK WOOD FINISH BED: Providing Material & Labour charge for making bed ( Bed Mattress size 36 x 78 inch )having size of

975 mm x 2025 mm made up by 19 mm Thk. (double - sandwich) marine plywood as pheripherial supports at all four sides &

horizontal middle support with all necessary proper solution. Having 300 -350 mm high base made with teak wood legs as per detail

drawing. Top of bed is covered by 19 mm thk marine ply or teak wood 75 to 100mm patta. Bed corners are supported with 60 to 75mm

teak wood round edje wood support finish with Laminate or polished. use of teak wood bidding of appropriate size at each joints All Rupees Seven Thousand One Hundred Seventy

exposed surfaces of bed is polished. Sizes and patterns may be varies as suggested by architect. All fixtures and fastning must be One Only

approved by architect/EOI as per given standard make. Complete with all hardwares like MS Nails & SS-304 screws etc. All Details

as per shown in detail drawings & as per instructions of architect / incharge engineer. Please see the Attached Make List for Apporoved

BED SIDE TABLE IN LAMINATE & TEAK WOOD FINISH: Providing and Installation of Bed Side Table made with teak wood, all

dimension, shape and size shall be shown in drwgs. All wooden work shall be of 1st class seasoned hard teak wood with melamine

polish/ finish. Top shall be of 15-18mm thick Arificial stone / Laminateas per selection or sample approval. Expose surface of teakwood

shall be polished in melamine finish with color tone as approved by Architect / Site Incharge. Make of Polish shall be Melamine by Asian Rupees Two Thousand One Hundred Twenty One

233 25 Paints / Nerolac / Berger and strictly as per manufacturer’s instructions. PVC/hard rubber shoe of 1st quality shall be screwed all legs. NO ₹ 2,121.00 ₹53,025.00

Rest all other details like drawer, shelves , knob & dimensions/ details as shown in drwgs.

Note: Sample approvals needs

to be done for the same, once it's finalized further quantities to be executed after approval.

Storage- Providing and fixing stoarge units of full height as per drawing. They shall consist of 19mm thick plywood top, sides, back,

bottom, shelves and shutters. The bottom of the storages shall be at 100mm from FFL. The top of storages shall be 1800mm TO

2000mm ht. The shutter shall be fixed with 6 Nos. 100 mm long stainless steel hinges of aaproved make & teak wood lipping finished

with melamine polish & laminate of approved shade with on one of the shutter and shelf facias and Mirror other shutter. Division of the

shutters shall be made equally according to the length of the storage. All the external surfaces shall be finished with 1.0mm thick. Rupees Twelve Thousand Nine Hundred Twenty

Laminate of approved make 19mm thick. Ply shelves removable type supported on side teak wood battens on both sides. All inner Eight Only

surfaces shall be finished with 0.8mm laminate on all sides including the shutters inclusive of all necessary approved fittings like

hinges, locks, SS brushed finish handles, tower bolts, locks and any necessary hardware items as per sized specified in detail drawings.

Material selection should be as per engineer in charge and chief architect.

Desk with Storage- Providing and fixing stoarge units of full height as per drawing. They shall consist of 19mm thick plywood top, sides,

back, bottom, shelves and shutters. The bottom of the storages shall be at 100mm from FFL. The top of storages shall be 1000mm ht.

The shutter shall be fixed with 4 Nos. 100 mm long stainless steel hinges of aaproved make & teak wood lipping finished with melamine

polish & laminate of approved shade all of the shutter and shelf facias. Division of the shutters shall be made equally according to the

length of the storage. All the external surfaces shall be finished with 1.0mm thick. Laminate of approved make 19mm thick. Ply shelves Rupees Nine Thousand Nine Hundred Eighty Eight

removable type supported on side teak wood battens on both sides. All inner surfaces shall be finished with 0.8mm laminate on all sides And Paise Ninety Only

including the shutters inclusive of all necessary approved fittings like hinges, locks, SS brushed finish handles, tower bolts, locks and

any necessary hardware items as per sized specified in detail drawings. Material selection should be as per engineer in charge and

chief architect.

Cassate Unit Box: Providing Material & Labour charge for making Cassate Unit Box of size 900 - 1200 mm x 100-150mm

considering 12 - 18 mm HDHMR / BWP MDF in desired cornice and beading/ moulding CNC design & Pattern provided in Detail

drawings and Material Selection. Finishing with all necessary hardware etc. as per details given in drawing and as per instructions of Rupees Twelve Thousand Five Hundred Seventy

236 4 Architect/Engineer In charge. NO ₹ 12,579.55 ₹50,318.20

Nine And Paise Fifty Five Only

approvals needs to be done for the same, once it's finalized further quantities to be executed after approval.

Providing and making VENEER / WOOD finish false ceiling using 12 mm BWP grade IS 710 plywood cladded with 4mm thick

decorative veneer with wooden battens or mpulding/ cornice patti made of teak wood of approved pattern & including all hardware

fixtures and fasteners, S.S. screws, grips and as per design, pattern, shapes and levels specified in detail drawings including two coats Rupees Six Thousand Two Hundred Thirty Six And

237 77 of PU polish including one coats of PU sealers, one coats of surfacer of approved make. Complete as per architect's instructions & SMT ₹ 6,236.75 ₹477,111.38

Paise Seventy Five Only

sized specified in detail drawings.Material selection should be as per engineer in charge and architect.

Providing and making PVC FALSE CEILING FOR WASHROOMS using 8mm thick Panel Size of 250mm Wide x 3000 mm Length

with wooden or approved Shade and pattern & including all hardware fixtures and fasteners, S.S. screws, grips & Conrner angles

including necessary framework wheerever required and as per design, pattern, shapes and levels specified in detail drawings including Rupees One Thousand Ninety Seven And Paise

238 329 cutting for light fixtures. Complete as per architect's instructions & sized specified in detail drawings.Material selection should be as per SMT ₹ 1,097.82 ₹360,919.14

Eighty Two Only

engineer in charge and architect.

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Plain Gypsum Board Ceiling : Providing & fixing suspended false ceiling, which includes Gypsteel ULTRA™ CRP surface ribbed

perimeter channels (having one flange of 20mm and another flange of 30mm and a web of 27mm) along the perimeter of ceiling, screw

fixed to brick wall/partition with the help of nylon sleeves and screws, at 610mm centres. Then suspending Gypsteel ULTRA™ CRP

surface ribbed intermediate channels of size 45mm (with two flanges of 15mm each) from the soffit at 1220mm centres with Gypsteel

ULTRA™ CRP surface ribbed ceiling angle of width 25mmx10mm fixed to soffit with GI cleat and steel expansion fasteners(Mfg by

Saint Gobain Gyproc). Then Gypsteel ULTRA™ CRP surface ribbed Ceiling section of having web of 51.5mm and two flanges of

26mm each with lips of 10.5mm are then fixed to the Gypsteel ULTRA™ intermediate channel with the help of connecting clip and in

direction perpendicular to the Gypsteel intermediate™ channel at 457mm centres. Single layer of 12.5mm tapered edge Gyproc® MR Rupees Six Hundred Thirty Six And Paise Seventy

239 510 (conforming to IS 2095 part 1, 2011) is then screw fixed to ceiling section with 25mm drywall screws at 230mm centres. Single layer of SMT ₹ 636.73 ₹324,734.49

12.5mm tapered edge Gyproc® MR (conforming to IS 2095 part 1, 2011) is then screw fixed to ceiling section with 25mm drywall

screws at 230mm centres. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment.

Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and

finishing with Gyproc Jointing compound and Gyproc Joint Paper tape (as per recommended practices of Saint- Gobain Gyproc India)

including cost of required Cut-Outs, finishingitems /Scaffolding, and for all heights as per complete as per instruction of engineer-in

charge and consultant.

Providing and fixing as per approved make Roller/Zebra/Roman curtain as suggested fabric . Fabric with manual operation and warranty

etc as per manufacturer’s specifications. Fabric to be as per approved sample. All the work complete as per the detailed drawing and

instruction of Architect/Client. (Contractor shall provide treated conceal channel complete in all respects on which all curtains shall be

fixed and should also take load of all the manual curtains). All complete as per approval of designer & instruction of PMC.Work Rupees One Thousand Seven Hundred Thirty

completed as per the detailed drawing and instruction of Architect/Client. Height will be measured from top of the conceal channel to sill Four And Paise Fifty Six Only

bottom lvl and clear opening size only there will be not extra payment towared overlaping.

Metal almirah having 6 locker of size 600 x 600 mm used high-quality stainless steel sheet. The surface after pickling, phosphating and

other processes to the process,then painting electrostastic Powder-Coating, strong corrosion resistance, not easy to rust. Rupees Twenty Four Thousand Eight Hundred

Thirty Five And Paise Ninety Only

Veneer/ Wooden finish wall paneling : Providing & Fixing wall paneling made 12-18 mm Marine Ply fixing on wall back cladding done

with ACP sheet & Facia & Edges finish with 4 mm Thick Veneer both vertically & horizontally finished with groove pattern and design Rupees Seven Thousand Five Hundred Fifty Nine

242 20 completed finished with PU polish as directed by EIC / Architect as per the sample approved by the Architect. SMT ₹ 7,559.85 ₹150,819.01

And Paise Eighty Five Only

PVC Fluted Panel Wall Panelling : Providing & Fixing wall paneling made from 12mm thk Marine plywood ( IS:710 ) grade with back

cladding of 3-4 mm ACP sheet fixed level on wall with necessary hardware & Facia / Front Cladding with 10 to 12 mm Thick PVC

Fluted Panel Patta of approved make finished with groove pattern With TOP & Side Edges Covered with Teak Wood Beading Patti as Rupees Five Thousand One Hundred Seventy One

per detailed Drawings and design completed finish as directed by EIC / Architect as per the sample approved by the Architect. And Paise Twenty Only

Providing Material & Labour charge for pasting of Non Wooven wallpaper having featurers of scratch proof, perfect finish, long lasting

finish, having artistic appeal & intricate patterns, which are easy to fix on walls with exotic looks, having thickness of 0.2mm & roll size

of 1300mm width or any size as per selection, as selected by the Architect & Engineer Incharge. Comlete with all necessary Rupees One Thousand Two Hundred Ninety

adhensives, etc as instructed by the Architect & Engineer Incharge. Samples should be approved by the Architect & Engineer Incharge. Seven And Paise Eighty Five Only

Please see the Attached Make List for Apporoved Makes.

Providing and Fixing Amastrong or equiv make Make Ambience Crystal (AC- 8.33mm) premium Commercial laminated Wooden

flooring of selected by architect venge/ Savannh oak fixing in proper shape and true line level, including fixing with primary base 3-4

mm thick armer inlcuding 0.9 micron polithin to protect the seapage . Wooden Flooring planks of size 1214mm x 141.50mm x 10mm Rupees Four Thousand Seven Hundred Ninety

245 15 thick Fixing on exacating floor. remove & premilinory clear all dirt and dust, necessary apply Adhesive tools etc. for stage use 19mm SMT ₹ 4,797.50 ₹71,962.50

Seven And Paise Fifty Only

marine ply by grid of 600 x 600mm with side finish of 1mm laminate.complete with all necessary adheshives, nails,screw etc.as

instructed by the architect & EIO.

Providing and fixing of Photo Frames/ Customized Paintings of average size of length is 1'6"x2'0", with synthetic framing wood frames,

side edges with 3 mm thick mount board(of desired colour shade), with front cover of 4 mm thick of float glass; and backing of 5/6 thk

MDF board and with necessary taping and fixing with screws / aluminium hooks; all complete in all respect. The images/ photographs Rupees Four Thousand Eight Hundred Ninety

/paintings have to be approved by Engineer In charge / Architect before installation at site. Eight And Paise Fifty Only

Providing and fixing of Photo Frames/ Customized Paintings of average size of length is 3'0"x4'0", with synthetic framing wood frames,

side edges with 3 mm thick mount board(of desired colour shade), with front cover of 4 mm thick of float glass; and backing of 5/6 thk

MDF board and with necessary taping and fixing with screws / aluminium hooks; all complete in all respect. The images/ photographs Rupees Six Thousand Nine Hundred Sixty Nine

/paintings have to be approved by Engineer In charge / Architect before installation at site. Only

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Providing and supplying artificial plants height between 3 to 4 feet approved by Architect such as moss and including necessary stand

248 10 for holding the plants as per the approved sample. Including Planter Box NO ₹ 6,565.00 Rupees Six Thousand Five Hundred Sixty Five Only ₹65,650.00

Providing and supplying artificial plants height between 2 to 3 feet approved by Architect such as moss and including necessary stand

Rupees Three Thousand Seven Hundred Eighty

249 10 for holding the plants as per the approved sample. Including the Planter Box and necessary decoration. NO ₹ 3,787.50 ₹37,875.00

Seven And Paise Fifty Only

Providing and applying 1mm-2mm thick trowel finish (Earthen)- A special multi-coloured combination of specific coated stones or sand

in a 4-coat system- 1 coat of base primer (50µm-60 µm) of required colour (Earthen) as approved by the architect/engineer in-charge

by Brush/Roller, 1 coat of Terre Granules (0.8mm to 1.2mm) thickness(Earthen) with steel trowel, 1 coat of clear matt/gloss finish top

coat(30µm-40µm). Rupees Nine Hundred Sixty Four And Paise Fifty

Above application is to be carried out on the single/double coat smooth mala plaster. Five Only

Note: Sample approvals needs to be done for the same, once it's

finalized further quantities to be executed after approval.

Bed sheet size Light colour single bed sheet bleached white of size 176x274 cm, 100 % cotton, mass 170 grm/sqm as per IS 175-

1989 all as spd with one pillow covers of size 69 cm x46 cm of same material, Color AS PER BUYER CHOICE with make : Bombey Rupees Three Thousand Fourteen And Paise

251 25 Dyeing,Raymonds,D Decor, Trident NO ₹ 3,014.85 ₹75,371.25

Eighty Five Only

Supplying FRP Planter 15”x15”x15” made of white or any shade required FRP (Fibre Rupees Two Thousand Six Hundred And Paise

252 10 Reinforced Polymer) Planter NO ₹ 2,600.75 ₹26,007.50

Seventy Five Only

Stainless Steel Fancy Garden Dustbin, Material Grade: Ss 304, Capacity: 30-35 Liter Rupees Twelve Thousand Four Hundred Twenty

Stainless Steel Zero to Infinity Stainless Steel Perforated Round Dustbin for Dry Waste (Medium 7"X12"inch, Silver) Stainless

Rupees Three Hundred Fifty Three And Paise Fifty

254 10 Steel,Open top. NO ₹ 353.50 ₹3,535.00

Full Height Glass Partition: made out of glazed partition with Slim line Partitions systems of 45 x 25 mm thick section on all four sides

with 10mm thick clear tempered glass, to be butt jointed with 2 to 3 mm edge chamfer & edge polishing all around. Distance between

two butt jointed glass panels not to exceed 4mm. Edges and grooves between glass panels to be filled with as Vertical "I" Section,

Rupees Three Thousand Three Hundred

255 32 between Glass to glass joint from FFL up to FCL Level neatly applied all complete as per architectural drawing. Rate shall include SMT ₹ 3,317.85 ₹104,512.28

Seventeen And Paise Eighty Five Only

necessary approved hardware items including all materials and labour etc. complete as per detail instruction of engineer-in charge and

consultant.45 x 25 mm thick section ( JEB/Alloy make )

The overall size of the Podium shall be 600 L x 400 D x 1050 H. The Podium body shall be made up of veneer on 18mm thick MDF

and its visible edges shall be sealed using 2mm PVC edge band with automatic machine or Veneer . The podium shall have one shelf to

keep the belongings while being used by the faculty. The top surface of the prodium shall be provided wtih 15 degree angle to enable

the user keep the documents & use them properly. One Gromet cut out with cap shall be provided at the table top for accessing the

Rupees Twenty One Thousand Seven Hundred

256 1 wires. Unless specified tolerance of +/- 5 mm to be considered for product dimensions i.e Length, Depth & height and tolerance of 5% NO ₹ 21,715.00 ₹21,715.00

to be considered for thickness & sizes of material & components used.

Note: Sample approvals needs to be done for the same, once it's finalized further quantities to be executed after approval.

Providing Material & Labour charge for making Flush Door (finished size of door is approx 61 mm) of size 900 - 1200 mm x

mm considering waterproof flush door sheet of 35 mm thickness covered both side by 9 mm marine ply & finished with 4 mm thk

vineer finished with PU polish on both sides of shutter supprted by SS -304 finish hinges. All exposed framing of 65 mm x12 mm

made by teak wood bidding and door patterns with inlay wooden beading or CNC design as per drawinfs and provided details complete Rupees Six Thousand Nine Hundred Forty Three

with PU polish. Finishing with all necessary hardwares like handles, conceal mortise locks, cylinders with 4-6 nos of keys, And Paise Seventy Five Only

stopers,tower bolt,MS nails, SS-304 screws etc. as per details given in drawing and as per instructions of Architect/Engineer In charge.

Please see the Attached Make List for Apporoved Makes.

Supplying decorative pots of 8”to 2'0 radius x upto 3'0 height made of white or any shade required FRP (Fibre

Reinforced Polymer). Rupees Nine Thousand Nine Hundred Forty Eight

And Paise Fifty Only

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Supply, Installation, Testing and Commissioning of Electric driven main fire pump (Hydrant & Sprinkler Pump) suitable for automatic

operation and consisting of following: complete in all respect as required.

a) Horizontal, centrifugal, end suction pump to ensure a minimum pressure of 3.5 kg / sq.cm. at highest and farthest outlet at specified

flow of 2280 lpm at 70 m. head conforming to IS standards. The installation shall be complete with flexible coupling and coupling guard

b) Squirrel cage induction motor with suitable HP with synchronous speed 3000 RPM, Suitable for operation on 415 volts, 3 phase

Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-F insulation, Conforming to IS standards.

c) Common Base plate for Pump and motor and coupling, coupling guard and other accessories as required for complete Installation of

pump set. Suitable cement concrete foundation with cement concrete plaster complete with anti-vibration arrangement of cushy foot

Rupees Three Lakh(s) Forty Thousand Three

259 1 mountings shall be done contractor. The supply & Installation of J-Type bolt for Pump fixing in vendor scope. SET ₹ 340,318.28 ₹340,318.28

Pump shall be capable of furnishing not less than 150% of rated capacity at a head of not less than 65% of the rated head. The shut off Hundred Eighteen And Paise Twenty Eight Only

head shall not exceed 120% of rated head.

d) The pump should be tested for bench mark at factory & Test certifcate submit to client . The all require Technical specification & Test

certificate shall be submit for Local fire Authority approval.).

Casing - Cast Iron to IS:210, Gr. FG260.

Impeller - Bronze IS:318 Br. LTB 2. (BS 1400 GR. LG2)

Shaft & Sleeve - ASTM A276 Gr.

Supply, Installation, Testing and Commissioning of Jockey pump suitable for automatic operation and consisting of following: complete

in all respect as required.

a) Horizontal Type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal and

flow of 180 lpm at 70m.head conforming to IS standards. installation shall be complete with flexible coupling and coupling guard as

b) Squirrel cage induction motor with suitable HP with synchronous speed 2900 RPM, Suitable for operation on 415 volts, 3 phase

Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-F insulation, Conforming to IS standards.

c) Required accessories to fix the pump, Common base plate for (a) and (b) from M.S. channel as required size.

d) Suitable cement concrete foundation with cement concrete plaster complete with anti-vibration arrangement of cushy foot mountings Rupees Ninety Five Thousand Seven Hundred

260 1 shall be in scope of contractor. Common Base plat for Pump and Engine and coupling, coupling guard and other accessories as SET ₹ 95,782.98 ₹95,782.98

Eighty Two And Paise Ninety Eight Only

required for complete installation of pump set.The supply & Installation of J-Type bolt for Pump fixing in vendor scope. The pump should

be tested for bench mark at factory & Test certifcate submit to client . & The all requrie Technical specification & Test certificate shall be

submit for Local fire Authority approval).

Casing - Cast Iron to IS:210, Gr. FG260.

Casing - Cast Iron to IS:210, Gr. FG260.

Impeller - Bronze IS:318 Br. LTB 2. (BS 1400 GR. LG2)

Shaft & Sleeve - ASTM A276 Gr.

Providing, laying, testing & commissioning of 'B' class medium duty G.I. pipe conforming to IS 1239 including welding, fittings like

elbows, tees, flanges,

tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more Rupees Nil

coats of synthetic enamel paint of required shade complete as required :

c) 80 mm dia Rupees One Thousand Three Hundred Twenty

Seven And Paise Thirty Two Only

Rupees One Thousand One Hundred Sixty Six

And Paise One Only

Rupees Nine Hundred Thirty Four And Paise Fifty

f) 40 mm dia Rupees Eight Hundred Forty Six And Paise Eighty

g) 32 mm dia Rupees Six Hundred Eighty Eight And Paise

Twenty One Only

h) 25 mm dia Rupees Six Hundred Twenty Three And Paise

Thirty Three Only

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with

Rupees Four Thousand Seven Hundred Thirty

267 1 nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 80 mm dia Each ₹ 4,739.44 ₹4,739.44

Nine And Paise Forty Four Only

Supply, installation, testing and commissioning of SS Ball Valve.

Rupees One Thousand One Hundred Forty Six

And Paise Ninety Five Only

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Providing, fixing, testing and commissioning of Drain valve assembly with required accessories.

Rupees One Thousand Eight Hundred Forty Eight

269 1 Size: 50 mm with 2nos. Of ball valves Each ₹ 1,848.85 ₹1,848.85

And Paise Eighty Five Only

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the

required. (a) 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 (b) 20 mm nominal Rupees Fourteen Thousand Nine Hundred Thirty

internal dia gun metal globe valve & nozzle. (c) Drum and brackets for fixing the equipmets on wall.(d) Connections from riser with 25 Three And Paise Seventy One Only

mm dia stop gun metal valve & M.S. Pipe and socket. 40 m

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets

Rupees Four Thousand Ninety One And Paise

271 4 etc. conforming to IS 636 (type-A) as required : Stainless Steel (Grade 304) Ea. ₹ 4,091.56 ₹16,366.24

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 0C with required accessories :

a) Pendent sprinkler Rupees Five Hundred Twenty Five And Paise

Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water

motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet

riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve

and bypass, test control box, ball valves, MS pipe of required size, flanges, Rupees Thirty Nine Thousand Four Hundred

orifice plate, gasket etc of follwing sizes as required: Ninety Seven And Paise Nine Only

Supply, installation, testing and commissioning of Pump on/off Remote switches to each internal hydrant valve with required Rupees Five Hundred Twenty Two And Paise

accessories. Twelve Only

Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. Rupees One Thousand Four Hundred Sixty Four

And Paise Nine Only

Providing & fixing flow switch in following sizes M.S.pipe including connection etc as required. 100mm dia Rupees Seven Thousand Seventy Four And Paise

Providing, installation, testing and commissioning of on-return valve of following sizes confirming to IS: 5312 complete with rubber

Rupees Seven Thousand Two Hundred Thirty

277 2 gasket, GI bolts, nuts, washers etc.as required : 80mm dia Ea. ₹ 7,237.16 ₹14,474.32

Seven And Paise Sixteen Only

Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel

coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chainas required Rupees Five Thousand Eight Hundred Fourteen

: Single headed Stainless steel And Paise Twenty Seven Only

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast

iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required Single headed Rupees Five Thousand Eight Hundred Fourteen

279 2 Stainless steel Ea ₹ 5,814.27 ₹11,628.54

And Paise Twenty Seven Only

Getting Approval/NOC of Fire protection system (Hydrant, Sprinkler etc..) from local fire authority and any other relevant statutory

Rupees One Lakh(s) Six Thousand Nine Hundred

280 1 authority at initial and various other stages of work, including preparation of report/drawings as per fire authority. Each ₹ 106,991.52 ₹106,991.52

Ninety One And Paise Fifty Two Only

Supply & Installation AUTO GLOW Signage's in Block / Small Letters of Specified Sizes , & Colour selection as per local CFO

requriement with requried tool & tackels to complete the job in safactory level of Client PM's. ₹

281 6 No Rupees Three Hundred Four Only ₹1,824.00

Fire Equipment: 4" X 12"

282 10 Fire Lift with Symbol: 6" X 16" No ₹ 304.00 Rupees Three Hundred Four Only ₹3,040.00

283 9 In case of Fire, do not use lift, use staircase with symbol : 6" x 16" No ₹ 304.00 Rupees Three Hundred Four Only ₹2,736.00

arrow downward +running main+emergency Exit with symbol: 6" X 16"

284 9 No ₹ 304.00 Rupees Three Hundred Four Only ₹2,736.00

Floor Sign: 4" X 12" Rupees Four Thousand Two Hundred Fifty One

286 5 Emergency Exit with symbol green colour (6"X16") No ₹ 304.00 Rupees Three Hundred Four Only ₹1,520.00

287 9 Co2 fire extinguishers with symbol(4"X4") No ₹ 304.00 Rupees Three Hundred Four Only ₹2,736.00

288 9 DCP fire extinguishers with symbol (4"X4") No ₹ 304.00 Rupees Three Hundred Four Only ₹2,736.00

289 4 Fire Hydrant & Hose reel with symbol . (6"X8") No ₹ 304.00 Rupees Three Hundred Four Only ₹1,216.00

290 5 Fire alarm Manual call point. (4"X4") No ₹ 304.00 Rupees Three Hundred Four Only ₹1,520.00

291 1 Fire alarm panel (6"X16") Page 24 of 43 No ₹ 304.00 Rupees Three Hundred Four Only ₹304.00

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Providing & fixing M.S. Grill for with necessary fitting with necessary fitting with one coat of primer and two coat oil paint as per details

292 1610 given by architect instructions given by engineer in charge Kg. ₹ 150.00 Rupees One Hundred Fifty Only ₹241,536.00

Electrical Work

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box, single mounting base frame covered with

Rupees Four Hundred Eighty Five And Paise

293 343 textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / Pt. ₹ 485.81 ₹166,632.83

Eighty One Only

H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth continuity of following type erected on PVC / Metallic/Wooden box, single Rupees Six Hundred Seventy Four And Paise Sixty

mounting base frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with Eight Only

necessary ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC /

295 103 Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of Pt. ₹ 510.05 Rupees Five Hundred Ten And Paise Five Only ₹52,535.15

accessories.[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board.(f) with medium class

Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of Rupees Seven Hundred Forty Five And Paise

accessories.[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.(f) with medium class Rigid PVC pipe Thirty Eight Only

and accessories erected concealed in wall/ceiling complete Cat. III

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered

with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In

297 30 Ea ₹ 25.25 Rupees Twenty Five And Paise Twenty Five Only ₹757.50

charge. (7) Blank Plate Single Cat.III

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured /metallic/white front plate modules erected on / in wall / ceiling with following type Rupees Two Hundred Fifty Seven And Paise Fifty

accessories Cat. III Five Only

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction

299 760 [C] CAT - 6 Mtr ₹ 47.47 Rupees Forty Seven And Paise Forty Seven Only ₹36,077.20

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected

with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as

300 760 Mtr ₹ 24.24 Rupees Twenty Four And Paise Twenty Four Only ₹18,422.40

directed.(a)20 mm

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected

with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as ₹

301 160 Mtr Rupees Thirty Three And Paise Thirty Three Only ₹5,332.80

directed.(b) 25 mm

Supplying under floor pregalvanised corrosion proof rectangular sheet steel cable trunking of 1.6 mm thick having with stand point load

up to 1.33 Ton & free from seepage of concrete of screed water with all accessories,Junction Box,Joints as required and demanded by

engineer-incharge and laying/erecting as per OEM guidelines and as per instruction of engineer incharge having following size of Rupees One Thousand Three Hundred Forty Two

dimensions and No of compartments (W x D x T) Cat-III And Paise Twenty Nine Only

[13] 300mm x 38mm x 1.6 mm with Three Compartments (FOR ELV,POWER IN FLOORING)

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Providing and fixing approved make Perforated C type cable tray. Made from pre- galvanized sheet steel. The cable tray should be

bended as per IS 2062/1079 . with max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt and washers

Rupees Four Hundred Seventy One And Paise

303 101 etc. erected on existing support as per Specification and as per instruction of engineer in charge..(5) 300 X 50 X 1.5 mm Thick (FOR Mtr ₹ 471.67 ₹47,638.67

Sixty Seven Only

ELV,ELE,HVAC,FIRE PLACED IN DUCT)

Providing & Erecting approved make following size of TV Co-axial flexible cable comprising inner conductor of solid bare copper

insulated with Foam PE & Secondary conductor made of poly - Aluminium film bonded Al. Braids @ suitable coverage overall

304 2 Mtr ₹ 39.39 Rupees Thirty Nine And Paise Thirty Nine Only ₹78.78

sheathed with black PVC insulation. (b) RG-6

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered

with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In Rupees One Hundred Sixty And Paise Fifty Nine

charge.(8) Computer RJ-45 socket Cat.III Only

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered

with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In

306 8 Ea. ₹ 210.08 Rupees Two Hundred Ten And Paise Eight Only ₹1,680.64

charge. (3) Two Pin/RJ-11 Telephone Socket [B] For Two Gang Cat.III

Providing & erecting Switch board for Computer or electric apparatus consisting of following modular type accessories mounted with

PVC / Metallic concealed/open box with single mounting base frame covered with textured/metallic /white front plate,modules erected

Rupees One Thousand One Hundred Thirty Three

307 8 with necessary connections as directed. 1 no. 6A/16A universal plug-switch combined.3 nos. 6A Switch 3 nos. 6A 5 pin Plug .For Ea. ₹ 1,133.22 ₹9,065.76

And Paise Twenty Two Only

Modular Type Accessories Cat.III

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered

with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In Rupees One Hundred Sixty And Paise Fifty Nine

charge. (4) TV Co-axial Socket outlet Cat.III Only

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used

as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name 160V to 270V,Power Factor

more than 0.95, THD < 15 %, CCT 3000 K to 6500K,

Rupees Three Hundred Twelve And Paise Nine

309 8 Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % Ea. ₹ 312.09 ₹2,496.72

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges shown.) (H) Mirror Light 9 Watts, wall mounted minimum 1 feet

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used

as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor more than 0.95, THD < 15% CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt ,LED LED driver efficiency > 85 %( fitting required LM-79 & LM-80 Certificates)(NOTE: Rupees Two Hundred Ninety Five And Paise

Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity Ninety Three Only

between the ranges shown.) (A) Tube Light with integral driver (iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used

as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.9, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver Rupees Four Hundred Twenty Seven And Paise

311 172 efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of Ea. ₹ 427.23 ₹73,483.56

Twenty Three Only

LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (A) Square/ Circular shaped

Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20 (ii) 11-15 watts, Surge-2 KV Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used

as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.9, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver Rupees Seven Hundred Fifty Eight And Paise Fifty

312 132 efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of Ea. ₹ 758.51 ₹100,123.32

LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (A) Square/ Circular shaped

Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20 (iv) 22-24 watts, Surge-2 KVCat-lll

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used

as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.9, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver Rupees One Thousand Seven Hundred Ninety

313 18 efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of Ea. ₹ 1,794.77 ₹32,305.86

Four And Paise Seventy Seven Only

LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (B) LED Panel Light with provision for

Plane front frame with translucent cover fixed to housing complete.IP20 (vi) 36 watts, 24" x 24", Surge- 2KV.CAT III

Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS body with inbuilt lowers & square

Rupees One Thousand Three Hundred Sixty Six

314 2 frame. 250mm with 1350 RPM Cat.II Ea. ₹ 1,366.53 ₹2,733.06

And Paise Fifty Three Only

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double ball bearing ISI mark with Condenser 230 volt A.C.

50 Hz 1200 mm sweep complete having 3blades with aluminium blades with , canopy & 30 cm. down rod erected with earthing.(Make Rupees One Thousand Nine Hundred Forty Eight

shall be approved by Engineer in charge)) And Paise Twenty Nine Only

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up to 50mm length each side and pierced

316 66 through a 16 Gauge M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with necessary finishing. Ea. ₹ 108.07 Rupees One Hundred Eight And Paise Seven Only ₹7,132.62

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box.

317 66 Ea. ₹ 18.18 Rupees Eighteen And Paise Eighteen Only ₹1,199.88

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan complete with proper

318 66 insulation without leakage and earthing. Mtr. ₹ 108.07 Rupees One Hundred Eight And Paise Seven Only ₹7,132.62

Supplying and erecting horizontal / vertical mounting type storage water heater with copper container housed in M.S./S.S./ABS body

insulated with glass wool/puff complete with heating elements,adjustable thermostats 300C to 850C, indicating lamp, safety valve,

Rupees Nine Thousand Five Hundred Thirteen

319 4 fusible plug, etc.complete erected with coach bolts, nuts. washers & cementation (B)15 Ltr-.with 2 /3K.W. heating element Premium Ea. ₹ 9,513.19 ₹38,052.76

And Paise Nineteen Only

Providing & erecting water cooler having storage capacity 150 Ltr. & cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The

outlet temp. of the water should drop by 15˚C within a hour, The water cooler should be comprising of hermetically sealed compressor,

Rupees Fifty Five Thousand Eight Hundred Ninety

320 1 fan motor, condensing unit, water tank surrounded by evaporating, coil, thermostats, relay etc.complete with necessary inlet & outlet Ea. ₹ 55,893.40 ₹55,893.40

connection. The body of water cooler will be made from Stainless Steel. Three And Paise Forty Only

Supplying & erecting 5 stage single reverse osmosis water purification system with M.S. powder coated frame, prefilter housing with 'O'

ring presediment filter GAC filter, carbon filter suitable buster DC pump capacity 80 psi, mention with 40 psi inline type post carbon filter

Rupees Twenty Nine Thousand One Hundred

321 1 auto low & high pressure switches with following size of storage tank & LPH capacity & erected as directed [C] 50 Ltr / Hr with 150 psi Ea. ₹ 29,187.99 ₹29,187.99

Eighty Seven And Paise Ninety Nine Only

2 nos booster pump

Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having breaking Rupees One Hundred Twelve And Paise Eleven

322 185 capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III Ea. ₹ 112.11 ₹20,740.35

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with all

Rupees One Thousand Nine Hundred Sixty Nine

323 37 advance feature & do not incorporate any electronic component. for following Max. rating erected as directed (i) 25 Amps.DP Cat. III Ea. ₹ 1,969.50 ₹72,871.50

And Paise Fifty Only

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 Rupees Seven Hundred Thirty Seven And Paise

324 60 in existing box having following capacity (c)63 Amp Cat.III Ea. ₹ 737.30 ₹44,238.00

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link,

earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should

Rupees Seven Hundred Two And Paise Ninety Six

325 24 be used of same company of MCB to be used) suitable for (A) single phase incoming and horizontal single phase outgoing (a) single Ea ₹ 702.96 ₹16,871.04

door (IP-30) (iii)8 way

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link,

earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should

Rupees Three Hundred Fifty Five And Paise Fifty

326 1 be used of same company of MCB to be used) suitable for (A) single phase incoming and horizontal single phase outgoing (a) single Ea ₹ 355.52 ₹355.52

door (IP-30) (i)4 way

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link,

earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should

Rupees Three Thousand Four Hundred Twelve

327 4 be used of same company of MCB to be used) suitable for (B) three phase incoming and single phase horizontal type outgoing Per Ea ₹ 3,412.79 ₹13,651.16

And Paise Seventy Nine Only

phase isolation type (PPI) (b) sheet steel double door (iii)8 way

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel board necessary IP42

and above protection as per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for outer body & doors,

SWG thick CRC M.S.sheet for internal partitions with necessary accesories , supporting angles/ flats channel including cutting,

bending, drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-in-charge with

erection of supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper wire / copperaluminium strips, rubber

grommets, rib, bakelite control fuses/MCB for measuring instruments, earth bus & earth bolts, foundation flange - boltsbase Plates, Rupees Sixteen Thousand Three Hundred Ninety

328 15 sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy duty end terminal connection,danger notice Sq Mtr ₹ 16,392.30 ₹245,884.50

Two And Paise Thirty Only

board,necessary ventilation,earthing strip complete. The Panel shall be painted with epoxy powder coating.(The rates excludes the cost

of switchgears, bus bars, inter connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured

excluding base beams) The panel shall be supplied with following approved manufacturers with followingsize.(C) The standard

companies switch gear shall be used and only manufacturers at CPRI approved factory as per IEC 61439 for beneficial use.(i) with

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 25 KA. at 415 V,having

normal current rating up to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal

Rupees Six Thousand One Hundred Seventy

329 17 connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III Ea. ₹ 6,173.12 ₹104,943.04

Three And Paise Twelve Only

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. having

normal current rating 125A. with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections, Rupees Eight Thousand Fifty Five And Paise

spreader tinned copper & complete erected in existing 16 G.M.S. housing.ICS=100% of ICU only Cat III Seventy Six Only

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. and above at

415 V . having normal current rating 250A. with variable thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all

Rupees Twenty Thousand Nine Hundred Forty Six

331 1 internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III Ea. ₹ 20,946.39 ₹20,946.39

And Paise Thirty Nine Only

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 50 KA and above at

415 V having Normal current rating 400A. with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. With all

Rupees Twenty Five Thousand Two Hundred

332 2 internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing.ICS=100% of ICU only Cat III Ea. ₹ 25,228.79 ₹50,457.58

Twenty Eight And Paise Seventy Nine Only

Providing and erecting Approved make Earth fault Relay suitable to mount with inter connection suitable to following size of moulded

case circuit breaker having CT ratio & MCCB rating as following along with shunt trip 220V AC. with all internal connections & Rupees Five Thousand Four Hundred Fifteen And

333 1 complete erected in existing M.S.housing.. (3) 250 A -400 A , CT Ratio 1/400 Ea. ₹ 5,415.62 ₹5,415.62

Paise Sixty Two Only

Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus having current

density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase

sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each Rupees Six Hundred Sixty And Paise Fifty Four

busbar,erected in existing cubical panel with necessary connections. (A) Suitable for 100 Amp. Capacity Only

Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus having current

density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase

sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each Rupees One Thousand Thirty Seven And Paise

busbar,erected in existing cubical panel with necessary connections. (B) Suitable for 200 Amp. Capacity Twenty Seven Only

Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus having current

density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase

sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each Rupees Two Thousand Two Hundred Four And

busbar,erected in existing cubical panel with necessary connections. (D) Suitable for 400 Amp. Capacity Paise Eighty Three Only

Providing and erecting multifunctional meter suitable for application of Power monitoring and showing measurement of following

Voltage, Frequency, Apparent energy, Apparent power, Active and reactive energy, Active and reactive power, Average voltage Vavg,

Peak demand power PM, QM, SM, Demand power P, Q, S, Apparent power S, S1, S2, S3, Unbalance current, Power factor and

displacement PF (signed, four quadrant), Calculated neutral current, Active, reactive, apparent energy (signed, four quadrant), Active Rupees Fourteen Thousand One Hundred Twenty

337 13 power P, P1, P2, P3, Voltage U21, U32, U13, V1, V2, V3, Phase currents, Average current Iag, Peak demand currents, Reactive power Ea ₹ 14,123.84 ₹183,609.92

Three And Paise Eighty Four Only

Q, Q1, Q2, Q3, Demand current I1, I2, I3, [Us] rated supply voltage 40...300 V AC 45...65 Hz, 40...300 V DC, Network frequency

Hz, Type of network 3P, Display type 7 segments LED, Display colour Red, Messages display capacity 3 fields of 4 characters, Display

digits 12 digit(s) - 14.2 mm in height

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Supplying and erecting approved make suitable panel indicator LED type lamp, lens cover, complete erected with necessary

338 50 connections. Ea. ₹ 43.43 Rupees Forty Three And Paise Forty Three Only ₹2,171.50

Providing and erecting metallic vitrified danger notice board as per language suggested by engineer incharge for MEDIUM VOLTAGE

339 15 installation to be erected as per IS-2551. Ea ₹ 69.69 Rupees Sixty Nine And Paise Sixty Nine Only ₹1,045.35

Pole 415V change over switch interior for panel mounting with operating mechanism A.C.23 duty confirming to IS for . (F)400A Cat-lll Rupees Twenty Two Thousand Two Hundred Fifty

Five And Paise Thirty Five Only

Supply, Installation, Testing and Commissioning of Heritage Type 12 Feet Gi And Casting Iron Pole Casting Base-640mm/272mm

Pcd. Bolt-M12 x 0Ft L Type-04Nos Per Pole. 76od Gi Pipe x 3mm-1500mm. 60od Gi Pipe x 3mm-1500mm With-Slevve/Arm 32od Gi

Pipe x 2.50mm-U Bent Type with 50Watt Spin Light/[5050 Led] Pc Diffuser Milky. Grey Paint and Providing 1:2:4 cement concrete

Rupees Twenty Two Thousand Three Hundred

341 75 foundation & 70 % PCC from bottom including excavation for the pole of size 45 x 45 x 100 cm. Deep in below ground level with plinth Nos. ₹ 22,364.43 ₹1,677,332.25

Sixty Four And Paise Forty Three Only

of 45 cm x 45 cm (or 45 cm dia x 45 cm) high upper ground level with necessary curing and finishing in approved manner.

Supplying & erecting IP 55 grade following size section pillar fabricated from joint less M.S. Sheet with angle iron legs made from

jointless M.S. Angle with cable clamps to be buried in ground to have appropriate erection to work uniform until erected with cement

concrete foundation and 45 cm high bricks work finishing with plaster etc. hinged double door internally supported on both side,with

internal and outside looking arrangement with look and keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is welded and

Rupees Three Thousand Five Hundred Ninety Five

342 6 other with nut and bolt for erecting Bakelite sheet. Painting the Section Pillar inside and out side with three tank powder coated paint. Ea ₹ 3,595.60 ₹21,573.60

And Paise Sixty Only

section pillar roof should be without joint with water leakage proof & tested as per IP 55 test & followed by IS 2147 of 1962 (B) 75 X

X 45 cm section pillar fabricated from 16 Gauge MS Sheet with angle iron legs 45 cm long made from 35 X 35 X 5 mm thick MS angle.

Supplying, erecting, testing, commissioning approved make M.S. Polygonal High Mast Pole having following general Specification.

(a) Polygonal Section fabricated from M.S. Plate confirms BSEN 10025 & Hot deep galvanized minimum 65/86 micron (as per IS

/1985) Lantern carriage with ring and rubber lines for erection of luminaries of suitable site.

(b) Maximum telescopic section not more than four

(c) Double drum gear pipe motorized winch with 6mm dia S.S. Rod (For 16 mtr and above size)

(d) Approved make L.E.D. aviation light = 1 No. Lightening arrestor = 1 No. with necessary wiring of 2.5 sq.mm 5 core ISI copper cable

(e) Bottom most section suitable for mounting reversible motor and switchgears having door not more than 1400mm x 300mm with Rupees One Lakh(s) Forty One Thousand Six

343 4 waterproof gasket & hinges & locking arrangement. Ea. ₹ 141,616.14 ₹566,464.56

Hundred Sixteen And Paise Fourteen Only

(f) Pole structure comprises suitable size of reversible motor, cable and necessary switchgears with control panel. (g) bottom section

shall have suitable size of thickness supports ribs foundation bolts nuts etc.

(h) Item not comprises the cost of lanterns. (i) Necessary Cement Concrete foundation as per IS including testing & commissioning of

the entire structure for following size of High Mast poles [1] High Mast 12 Mtr. TOP A/F 105 mm, BOTTOM A/F 360mm, No. of Sec.

No. - 1, Bottom Thickness - 3 mm, Size of Base Plate - Dia 520 mm x 20 mm thick, Foundation Bolt Size M24 x 850 mm, Qty - 6 Nos.,

Suitable for mounting Fitting of Light - 6 Nos.

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above assembled on

single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio Rupees Ten Thousand Eight Hundred Eighteen

344 20 >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Ea. ₹ 10,818.11 ₹216,362.20

And Paise Eleven Only

Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with over-

voltage protection. (vii) above 200 to 250 watts Cat-lll

Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and operate battery backup 1 channel day

clock with 14 memory programme, suitable to operate on 240V + 5%, 16A with, floating contacts Minimum switching setup time

minimum & LCD display. Also comprised permanent ON/OFF switching. Programming switches & housed in fire proof thermoplastic Rupees Three Thousand One Hundred Sixty Eight

345 4 enclosure & transparent cover erected as required with necessary connection erected as directed. Ea ₹ 3,168.37 ₹12,673.48

And Paise Thirty Seven Only

Providing and erecting AC-3 duty 3 pole power contactor with 2 NO & 2 NC aux contacts complete with 415V/220V operating coil

Rupees Eight Thousand One Hundred Forty One

346 4 suitable for (L&T, BCH,T.C., Siemens, C&S make).(C) for 60 / 70 A rating Ea ₹ 8,141.61 ₹32,566.44

And Paise Sixty One Only

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of

pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green

347 1890 colour for earth continuity of following size.(A) with medium class Rigid PVC pipe and accessories.(b) 2 wire 2.5 sq. mm (FOR Mtr ₹ 82.82 Rupees Eighty Two And Paise Eighty Two Only ₹156,529.80

COMPUTER BOARD and SWITCH BOARD)

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of

pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth

Rupees One Hundred Twelve And Paise Eleven

348 1749 continuity of following size(A) with medium class Rigid PVC pipe and accessories.(a) 2 wire 4 sq. mm (FOR 15/16A SS & AC) Mtr ₹ 112.11 ₹196,080.39

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of cables (F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core) (Meter To Rupees Five Hundred Forty And Paise Thirty Five

Main Panel) Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of cables (C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)(For Floor Rupees Two Hundred Eighty Four And Paise

Sub Panel and Pump Panel) Eighty Two Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. (B) 4 core 16 Sq. mm (MAIN Rupees Nine Hundred Eighty Seven And Paise

PANEL TO FEEDER SECTION PILLAR ) Seventy Eight Only

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of following size of cables (C) 4 core 10 Sq. mm (Street Pole To Pole AND Rupees One Hundred Forty And Paise Thirty Nine

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for 1.1 KV. to be laid on wall

353 70 with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. (C) 4 core 6 Sq. mm ( USED Mtr ₹ 510.05 Rupees Five Hundred Ten And Paise Five Only ₹35,703.50

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with

Rupees Six Hundred Seventy Six And Paise

354 200 necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables.(A) 4 core 10 Sq. mm Mtr ₹ 676.70 ₹135,340.00

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out

355 6 going tails, insulating tape etc for following size of cables. (C) 2 to 4 core 10 Sq. mm Ea. ₹ 38.38 Rupees Thirty Eight And Paise Thirty Eight Only ₹230.28

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out

356 6 going tails, insulating tape etc for following size of cables. (D) 2 to 4 core 16 Sq. mm Ea. ₹ 47.47 Rupees Forty Seven And Paise Forty Seven Only ₹284.82

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out

357 2 going tails, insulating tape etc for following size of cables. (B) 2 to 4 core 6 Sq. mm Ea. ₹ 38.38 Rupees Thirty Eight And Paise Thirty Eight Only ₹76.76

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of cables (E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core) (FOR Rupees Four Hundred Ninety And Paise Eighty Six

HVAC PANEL) Only

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured

Rupees One Hundred Forty And Paise Thirty Nine

359 2 cable complete with out going tails, insulating tape etc for following size of cables. (E) 3 & 1/2 core 120 Sq. mm Ea. ₹ 140.39 ₹280.78

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured

360 8 cable complete with out going tails, insulating tape etc for following size of cables. (B) 3 & 1/2 core 35/50 Sq. mm Ea. ₹ 75.75 Rupees Seventy Five And Paise Seventy Five Only ₹606.00

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured

Rupees One Hundred Thirty One And Paise Thirty

361 2 cable complete with out going tails, insulating tape etc for following size of cables. (D) 3 & 1/2 core 95 Sq. mm Ea. ₹ 131.30 ₹262.60

Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool &

362 24 connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (C) 16 Sq.mm. Ea. ₹ 12.12 Rupees Twelve And Paise Twelve Only ₹290.88

Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool &

363 8 connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (A) 1.5/2.5 to 6 Sq.mm Ea. ₹ 8.08 Rupees Eight And Paise Eight Only ₹64.64

Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool &

364 8 connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (B) 10 Sq.mm Ea. ₹ 10.10 Rupees Ten And Paise Ten Only ₹80.80

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool &

365 8 connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (B) 10 Sq.mm Ea. ₹ 13.13 Rupees Thirteen And Paise Thirteen Only ₹105.04

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool &

366 32 connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (D) 35/50 Sq.mm. Ea. ₹ 20.20 Rupees Twenty And Paise Twenty Only ₹646.40

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool &

367 8 connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (F) 95 Sq.mm. Ea. ₹ 40.40 Rupees Forty And Paise Forty Only ₹323.20

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (G) 120 Sq.mm.

368 8 Ea. ₹ 45.45 Rupees Forty Five And Paise Forty Five Only ₹363.60

Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power

369 24 switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required.(b) One wire 1.50 sq. mm ( Mtr ₹ 17.17 Rupees Seventeen And Paise Seventeen Only ₹411.91

FOR PANEL INTERNAL WIRING)

Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power

Rupees Twenty Seven And Paise Twenty Seven

370 15 switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. (c) One wire 2.50 sq. mm ( Mtr ₹ 27.27 ₹409.05

FOR PANEL INTERNAL WIRING)

Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power

371 1 switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. (e) One wire 6.00 sq. mm ( Mtr ₹ 56.56 Rupees Fifty Six And Paise Fifty Six Only ₹56.56

FOR PANEL INTERNAL WIRING)

Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power

372 13 switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. (f) One wire 10.00 sq. mm ( Mtr ₹ 91.91 Rupees Ninety One And Paise Ninety One Only ₹1,194.83

FOR PANEL INTERNAL WIRING)

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the fault all over the run and back filling the same

373 1050 and making the surface as normal ground. Mtr. ₹ 55.55 Rupees Fifty Five And Paise Fifty Five Only ₹58,327.50

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth in existing trench for laying of cable. below ground / road surface for

374 550 Mtr. ₹ 62.62 Rupees Sixty Two And Paise Sixty Two Only ₹34,441.00

enclosing cable (A)50 mm outer dia.

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth in existing trench for laying of cable. below ground / road surface for

375 200 Mtr. ₹ 95.95 Rupees Ninety Five And Paise Ninety Five Only ₹19,190.00

enclosing cable(C))90 mm outer dia

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper cable approved make of following

376 100 Size. (D) (B) 3 Core x 2.5 Sq. mm. (FOR WATER TANK) Mtr. ₹ 104.03 Rupees One Hundred Four And Paise Three Only ₹10,403.00

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper cable approved make of following

Rupees One Hundred Seventy Two And Paise

377 100 Size. (D) 3 Core x 6 Sq. mm. (FOR WATER TANK) Mtr. ₹ 172.71 ₹17,271.00

Seventy One Only

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper cable approved make of following

Rupees Two Hundred Ninety Five And Paise

378 210 Size. (E) 3 Core x 10 Sq. mm. (FOR WATER TANK AND BORE) Mtr. ₹ 295.93 ₹62,145.30

Ninety Three Only

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200- 250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded

by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy duty

cover.(approved make OEM has to submit test certificate) & having back filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 • / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back

Rupees Four Thousand Five Hundred Ninety One

379 13 fill Compound :- Earthing compound should be capable to retainmoisture for long time Necessary test report must be submitted.(c) For Ea. ₹ 4,591.46 ₹59,688.98

And Paise Forty Six Only

Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer System(like

Automation, SCADA) i.e independent (a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200- 250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded

by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy duty

cover.(approved make OEM has to submit test certificate) & having back filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 • / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back Rupees Eight Thousand Six Hundred Thirty Six

fill Compound :- Earthing compound should be capable to retainmoisture for long time Necessary test report must be submitted.(c) For And Paise Fifty One Only

Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer System(like

Automation, SCADA) i.e independent (c) For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing,

A.C.Plant & Sensitive Computer System(like Automation, SCADA) i.e independent Earthing in normal soil. Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board,

Rupees Seventy Seven And Paise Seventy Seven

381 20 Motors etc. using proper clamp. Kg ₹ 77.77 ₹1,555.40

Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. Rupees Seventy Seven And Paise Seventy Seven

Providing & erecting open well type horizontal mono block pump set with stainless steel body having following specification (A)

H.P. single phase open well motor pump set having discharge of 115 LPM @ 15 mtr. head suitable for 32 mm dia. delivery pipe with Rupees Seven Thousand Nine Hundred Thirty

control panel Cat. II FOR FOUNTAIN Four And Paise Fifty Six Only

Providing & erecting open well horizontal mono block pump set with cast iron body, complete for three phase submersible motor

having[C] For 3 HP 3 phase open well horizontal mono block pump set suitable for 85 LPM to 270 LPM @ 11 mtr to 33 mtr head Rupees Fifteen Thousand Seven Hundred Seven

suitable for 50/65 mm dia delivery pipe Cat.II (WORKING + STANDBY) And Paise Fifty Two Only

Providing & erecting open well horizontal mono block pump set with cast iron body, complete for three phase submersible motor having

[E] For 7.5 HP 3 phase open well horizontal mono block pump set suitable for 1550 LPM to 370 LPM @ 13.5 Mtr to 42 Mtr head Rupees Twenty Five Thousand Nine Hundred

suitable for 65/75 mm dia delivery pipe Cat.II (WORKING+ STANDY) Eighty Seven And Paise Thirty Only

SITC of a robust, high-efficiency submersible pump designed for wastewater and stormwater management, ideal for residential,

commercial, and light industrial applications. It is rated at 3.0 HP (2.2 kW) and operates on a three-phase 220 V supply, within a voltage

range of 160 V to 250 V, at a rated frequency of 50 Hz. The pump features a nominal speed of 2800 RPM and is built with F-Class Rupees Twenty Six Thousand Eight Hundred

386 2 insulation, ensuring reliable thermal protection during continuous operation. It is capable of handling liquid temperatures up to 30°C and Job ₹ 26,886.20 ₹53,772.40

Eighty Six And Paise Twenty Only

passing solids up to 20 mm in size. Also includes all Accessories of Motor Starter Panel.

S.I.T.C. submersible pump set for bore of 150 mm. dia. Or more having 3 phase motor capacity about 20 H.P and discharge capacity

having . Lifting and Lowering taken extra.(A) (20 Stage) 370 to 350 LPM discharge at head in between 168 to 177 mtrs. suitable for 50 Rupees Sixty Five Thousand Six Hundred Fifty

mm dia. delivery pipe Cat.III Only

Supplying & erecting approved make 3 phase motor control cubical panel ( Star - Delta) made from16 G. CRCA sheet duly painted with

epoxy powder painted inside and outside with hinged doors and locking arrangement, consisting of suitable size of ON- OFF isolator

(AC - 3/23 duty) main fuses, single phasing preventer cum water level. Guard (Complete unit), Toggle switch to by pass Single phase

preventer cum WLG, indicating lamps for R- Y- B phases, over load relay, Automatic water level controller, Ammeter & Voltmeter each Rupees Twelve Thousand Nine Hundred Ninety

388 2 with two way selector switch incoming wires duly socket Crimped, Panel to be erected on angle iron frame grouted on wall as directed. Ea. ₹ 12,993.65 ₹25,987.30

Three And Paise Sixty Five Only

Star Delta & main contactor, overload relay, thermal / Electronic Star delta cutoff timer, start - stop push buttons. The isolator overload

relay & contactors of L& T, Siemens or Cuttler Hamer make only. Panel to be erected on angle iron frame ground on wall. (A) S/D up

Supplying & erecting approved make motor control cubical panel [Star delta] made from 16G CRCA sheet duly epoxy powder painted

inside and outside with hinged doors and locking with suitable size of ON - OFF isolator (AC 3 / 23 duty) main fuses. Digital volt and

current meter (in a single unit) with micro controller based control unit and current sensing single phasing preventer electronic overload

protection, over voltage (Programmable) protection and under voltage (Programmable) protection, prod less dry run protection Rupees Seven Thousand Two Hundred Fifty And

389 3 programming facility for setting of all parameter like overload current, high voltage limit, low voltage limit, dry run limit with digital Ea. ₹ 7,250.79 ₹21,752.37

Paise Seventy Nine Only

indication on seven segment LED display for any fault like over load, high voltage, low voltage, dry running single crimped, electronic

star delta timer, feather touch start / stop push buttons to be erected on angle iron frame. Grouted on wall the contactors will be of L& T,

Siemens, BCH make only) (A) DOL up to 5.0 H.P.

Supplying & erecting approved make motor control cubical panel [Star delta] made from 16G CRCA sheet duly epoxy powder painted

inside and outside with hinged doors and locking with suitable size of ON - OFF isolator (AC 3 / 23 duty) main fuses. Digital volt and

current meter (in a single unit) with micro controller based control unit and current sensing single phasing preventer electronic overload

protection, over voltage (Programmable) protection and under voltage (Programmable) protection, prod less dry run protection Rupees Eighteen Thousand Six Hundred Forty

390 1 programming facility for setting of all parameter like overload current, high voltage limit, low voltage limit, dry run limit with digital Ea. ₹ 18,643.59 ₹18,643.59

Three And Paise Fifty Nine Only

indication on seven segment LED display for any fault like over load, high voltage, low voltage, dry running single crimped, electronic

star delta timer, feather touch start / stop push buttons to be erected on angle iron frame. Grouted on wall the contactors will be of L& T,

Siemens , BCH make only) (E) S/D up to 22.5 H.P.

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Providing and erecting Two way Centre off Four pole MCB Change Over Switch (IS 13947-3 / IEC 60947-3) in existing box. (b) for

Rupees One Thousand Three Hundred Forty Four

And Paise Thirty One Only

Supplying & erecting approved make Automatic liquid level controller 6A.as per instruction of Engineer in charge on site complete with

wiring connection with existing wires , with copper conductor from pump to upper and lower tank.(Size Not less than 1.5 Sq MM) from Rupees Two Thousand Three Hundred Fifty Five

pump to upper and lower tank with ISI marked Rigid PVC Pipe. And Paise Thirty Two Only

Supplying, Erecting, Testing & Commissioning the passenger / stretcher lift having following main features: (A) GENERAL

DESCRIPTION OF LIFTS.

[1] GEAR LESS LIFT DRIVE (MRL) comprising of High Starting torque Lift 3 phase 440 V A. C. Permanent Magnet Synchronous

motor of proper rating with high efficiency shall be used.[2] Micro processor based / PLC, ACVVVF, vector control drive with encoder

feedback closed loop system shall be used for lift car and door operation which shall be full collective selective operation hall call

demand response, UP/DOWN hall stops, Main, Up/ Down Contactor with overload and phase reversal relay and safety controls. [3] Car

with M S platform with bracings of adequate size and to sustain the impact load cabin + passenger with safety factor of fire for steel and

393 side panels of Stainless steel of sheet of grade 304 duty. Car ceiling will be S.S. finishes with aesthetic appearance with LED ceiling

lights. Car flooring shall be of s/s 304 chaker plate design sugeested of engineer in charge. of engineer in charge. Car doors shall be of

stainless steel grade 304, hairline finish with centre opening / telescopic automatic doors. Car panel will also be S.S. 304 finished with

emergency stop device, mechanical door safety device, facility of auto/ attended mode. All car panel buttons and all floor switches must

be with brail language as per lift act. [4] All landing doors must be fire rated for 2 hour shall be fully automatic centre opening/ telescopic

opening made of hairline finish steel grade of 304 with key holes and infrared curtains with Unlocking facility from outside

[5] Appropriate battery operated emergency light in the car along with alarm switch shall be provided. Also, Emergency Light & Fan

should start immediately without any Time Delay as soon as power fails.

[6] Digital scrolling indicator system for up-down arrow along with floor position indicator shall be provided inside the car and at all floors.

[7] Full height infra red curtain with multiple cross / crossing light beams shall be provided. [8] Automatic Rescue Device (ARD) shall be

provided accordingly of passenger capacity with Manual Rescue Operation ( Manual Cranking Facility). [9] Audio visual indication in the

lift car showing over loading shall be provided such that doors kept open till excess load is removed. [10] Spring buffers/PU Buffers shall

[11] Car fan as per passenger capacity with automatic sleep timer shall be provided. [12] Voice annunciator with suitable music shall be

provided in lift car. [13] Self diagnostics system for operational and safety parameters shall be provided in control panel. [14]

Mechanical over speed governor with governor calibration as per actual site parameters and submission of calibration certificate

submission, door key holes in the floor doors, fireman switch shall be provided. [15] Lift machine hoisting arrangement in the lift

machine room and monkey ladder for lift pit should be provided by the lift agency, along with the other steel structure works,

foundations for the machine etc… [16] In the hoist way fascia plate shall be provided without any extra cost, where ever required as / if

directed by engineer in charge.

[17] Permanent wiring with necessary safety devices like RCCB in all circuit, Over Voltage Under Voltage protection and THD eliminator

in circuit for lift machine room and lift well with proper numbers of light points, with fixtures, exhaust fan and plug points shall be

provided by the agency. Only 3 phase Power Supply shall be made available by department in lift machine room. Necessary Earthing

as per Lift Act/Rules shall be arranged by Lift Agency. [18] Any civil/ electrical works for additional and alteration in lift shaft and

machine room related to erection of lift shall be made by lift agency without any extra cost. (granite/marble fixing around all landing door

openings are not in lift agency’s scope.) [19] Agency has to provide all working drawings and documents and liaison services for

obtaining all necessary permission from lift inspector and other authorities. [20] acrylic transparent licence/display A4 size holder in lift

car [20A] As per statutory requirement of Govt. Of Gujarat lift & escalator act 2000, lift agency has to provide 1. Car top safety

barricade 2. Push & talk communication system. 3. Fireman's switch operation at Ground Floor. 4.carrying out third party lift

inspection during/after lift erection and provide report by third party authorized by concern licensing authority 5.agency has to provide

third party insurance upto completion of free maintenance period and submit the document for the same. [21] Car Panel Operating

Buttons with floor position indicator/buttons must be of Auto Glow type clearly visible when view from inside cabin.

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

[22] For Physically Handicapped person Full Length Handrails of hairline finish steel grade of 304 should be provided at appropriate

height on the Rear & Side Wall Panels in Lift Car. [23] With Necessary KVA rating voltage controlled Stabilizer suitable for your

controller, drive and all equipments of lift. [24] Necessary rating of DP Elcb and FP Elcb required for lift is in scope of work which rating

is sugested by CEICED Department (electrical Inspector)

(B) SPECIAL FEATURES DESCRIPTION OF LIFTS for PREMIUM category 1. Advanced control system dual 64 bit embedded

microprocessor with CANBUS Serial Communication mode including Regenerative power efficient operation,on site programming

facility, Anti nuisance, Pte-opening, BMS/RMS with necessary online real time monitoring system having necessary connectivity for Rupees Fourteen Lakh(s) Seventy Four Thousand

2 remote monitoring & other suitable supporting hardware & software devices to fulfil the purpose. 2. Floor Indication LCD Display with Ea. ₹ 1,474,779.78 Seven Hundred Seventy Nine And Paise Seventy ₹2,949,559.56

call registration & brail mark with arrival gong and hall lantern & TFT Screen in the car with MP3 Voice Announcer. 3. CAR Panel Eight Only

should be Scratch resistive SS Moonrock finish / Hair Line / Honeycomb for car and all Doors, All landing doors must have fire rating

up to 2 hours and car door must have multi-level crisscross beam door protection. 4. To & fro communication system & wiring (i.e. car

control room & guard room ) and Each elevator are equipped with remote monitoring system.agency has to provide mobile app and

user id and password for monitoring 8 / 10 Passengers, Ground plus 2 upper floor with Rated Speed of 1.0 m/sec., (C) With

General PLUS ADDITIONAL SPECIAL FEATURES attached herewith. Prem. Cat.

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Volume air cooled Outdoor units suitable for cooling

and heating, having all hermetically sealed inverter type Scroll Compressor(s), microprocessor based Controller, top discharge type

condensing unit(s), with R410 A Refrigerant (Or Eco Friendly Green Gas if any), vibration isolators, with suitable foundation, MS Stand

for Unit with necessary paint etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at Rupees Twenty Two Thousand Two Hundred

50°C ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The Thirty Three And Paise Thirteen Only

unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than

3.1 and IEER not less than 6.5. (Design should be got approval before execution from engineer in charge)

Supply, installation, testing and commissioning of following minimum capacity 4-way/2 way/radial flow as per approval VRV Cassette

Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced

blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary

supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, max Rupees Thirty One Thousand Nine Hundred

395 6 noise level 60dB @ 400 cfm per TR(minimum) complete, as required. The unit shall have automatic force shut down provision in case Ea. ₹ 31,922.06 ₹191,532.36

Twenty Two And Paise Six Only

of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and

Degree C WB temperature fresh air provision compatible for Remote Operation System (J) 4 TR

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard

drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger supports,

jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber

Rupees Three Hundred Seventy And Paise Sixty

396 40 tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc with Mtr. ₹ 370.67 ₹14,826.80

necessary refrigerant joint as required : (B) 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation Seven Only

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard

drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger supports,

jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber

397 25 tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc with Mtr. ₹ 511.06 Rupees Five Hundred Eleven And Paise Six Only ₹12,776.50

necessary refrigerant joint as required : (D) 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard

drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger supports,

jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber

Rupees Six Hundred Sixty Four And Paise Fifty

398 50 tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc with Mtr. ₹ 664.58 ₹33,229.00

necessary refrigerant joint as required : (D) 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard

drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger supports,

jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber

Rupees Seven Hundred Eighty Three And Paise

399 30 tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc with Mtr. ₹ 783.76 ₹23,512.80

Seventy Six Only

necessary refrigerant joint as required : (E) 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard

drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger supports,

jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber

Rupees Nine Hundred Sixty Two And Paise Fifty

400 35 tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc with Mtr. ₹ 962.53 ₹33,688.55

necessary refrigerant joint as required : (F) 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard

drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger supports,

jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber

Rupees One Thousand Two Hundred Two And

401 40 tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc with Mtr. ₹ 1,202.91 ₹48,116.40

Paise Ninety One Only

necessary refrigerant joint as required : (H) 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard

drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger supports,

jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber

Rupees One Thousand Three Hundred Twenty Six

402 30 tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc with Mtr. ₹ 1,326.13 ₹39,783.90

And Paise Thirteen Only

necessary refrigerant joint as required : (K) 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation

Supply installation testing commissioning Shielded Shielded Control Cables for VRV System with necessary ISI mark Medium class

rigid PVC pipes with necessary accessories with termination in machine and control equipments.. (A) 2C X 1.5 Sq mm Shielded Rupees One Hundred Forty Three And Paise Forty

Central Control System (B) Central wired Remote Control System Rupees One Thousand Six Hundred Seventy And

Paise Fifty Four Only

Supplying colourless non inflammable refrigerant Gas R-410 Rupees Nine Hundred Twenty Five And Paise

Rigid UPVC drain pipe of 10 Kg/cm2. rating with 9 mm thick.nitrile rubber insulation.(A) 50 mm dia.

Rupees One Hundred Twenty Nine And Paise

Twenty Eight Only

SITC of 24 x 10/100/1000BASE-T PoE ports

4 x Gigabit RJ45/SFP Combo ports

Advanced L2 switching and security features

L2+ Static Routing Rupees Thirty One Thousand Nine Hundred

Optional “standard mode” or “surveillance mode” management user interface Ninety Six And Paise Eighty Only

193 W PoE budget [Approved by Competent Authority i.e. not Below the

rank of Executive Engineer ]

SITC of Patch Panel Cat 6 UTP Keystone Type- 24 Port-Fully Loaded [Approved by Competent Authority i.e. not Below the rank of Rupees Four Thousand Four Hundred And Paise

408 4 Executive Engineer ] Ea. ₹ 4,400.57 ₹17,602.28

Fifty Seven Only

SITC of CAT6 UTP 24AWG PATCH CORD:1M,Plug 30U' Snag less

[Approved by Competent Authority i.e. Rupees One Hundred Fifty Six And Paise Fifty

not Below the rank of Executive Engineer ] Five Only

SITC of 1G SM SFP module Rupees Fifteen Thousand Nine Hundred Ninety

Eight And Paise Forty Only

SITC Of 6 Core SM Fiber Cabe Rupees One Hundred Twenty Four And Paise

Forty Three Only

SITC of 1 Meter SM Fiber patch cord

Rupees One Thousand Nine Hundred Thirteen

And Paise Fourteen Only

SITC of 6 Port loaded SM LIU Rupees Twelve Thousand One Hundred Sixty Two

And Paise Twelve Only

Supplying and erecting approved make online Un-interruptible Power Supply system comprising flat cum-boost charger with IGBT base

rectifier & Inverter & sealed maintenance free SMF batteries. The charger having operating capacity for input 160-270V AC & inverter

having output 230V,50 Hz Ac with 0.8 load power factor with battery, over/under voltage output with over load & short circuit protection Rupees Twenty Nine Thousand Six Hundred

equipment. The system housed in CRC sheet duly powder coated paint with following power backup.with MS painted batteries stand, Sixteen And Paise Twenty Three Only

10% Overload capacity for momentary load.(A) 1 KVA with 1Hr Backup

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

SITC of Moducab 42U 800Wx1000D Floor Mount Network Rack with Front Single Glass Door and Rear Mesh Perforated Lockable

Single Door ,Openable Side Panels with Lock and Slam Latches,Top Cover with Four Fan Mounting Provision , Two Pairs of Verticle

Cable Channels front & Rear Side with Metal Loops , Cable Entry Cut Outs on Top and Bottom , Pair of adjustable 19" Mounting Angle

with 'U' Marking , 3" Castor Set of 2 with Break and 2 without Break. Multi Hollow Alluminium Profile Frame Modular Construction with

Epoxy polyester Powder coated 60-80 micron thickness.

Accessories :: Rupees Seventy One Thousand Five Hundred

(1) 90 CFM Fan - 2 Nos. Thirty Seven And Paise Twenty Nine Only

(2) 1U Metal Cable Manager with PVC Loops - 1 Nos.

(3) 10 Socket 6/16A PDU with MCB - 1 Nos.

(4) Monitor 700D Tray - 1 Nos.

(5) Mounting Hardware packet of 20Nos.- 1 Nos.

SITC of 15U Outdoor Rack - 600Wx 600D With PDU 4 Socket & Half Tray , Fan 1 nos, cable manager Rupees Twenty Two Thousand Eight Hundred

Thirty One And Paise Five Only

SITC of 3MP IP 2.8 mm Fixed Lens IR Rugged Dome Cameras 1/2.8” CMOS Image Sensor, 3MP (2304 x 1296), 2.8 mm, Fixed, F1.4

Color: 0.002 Lux @ F1.6, B/W: 0 Lux IR ON, 40 Mtrs IR Distance,

1/3 to 1/1,00,000s Shutter Speed 130 dB WDR,

H.265 HEVC/H.264/MJPEG, Smart Codec Video Compression, 30°C ~ 60°C (-22°F ~ 140°F) (IR off), ONVIF Profi le S/G/T/M, Rupees Twenty Eight Thousand Two Hundred

417 15 Motion Detection, Scene Change, Tamper Detection,etc Video Analytics,10 Base-T/100 Base-TX Ethernet (RJ-45), Ea. ₹ 28,219.40 ₹423,291.00

Nineteen And Paise Forty Only

IPv4, IPv6, TCP/IP, HTTP, HTTPS, RTSP/RTP/RTCP, IGMP/

Multicast, SMTP, SNMP, DHCP, NTP, DNS, DDNS, CoS, QoS,

802.1X, UPnP, mDNS(Bonjour), UDP, ICMP, ARP, TLS, SFTP

IP67, K10, BIS ER, STQC

SITC of 3MP IP MFZ Lens IR Rugged Bullet Cameras, 1/2.8” CMOS,

2.7 ~ 13.5 mm, MFZ, DC-Iris, F1.4 ~ F3.6 Lens, 3MP (2304×1296),

Color: 0.002 Lux @ F1.6 B/W: 0 Lux IR ON, 55 dB SNR,

1/3 to 1/1,00,000s Shutter Speed, Smart IR (Auto/Manual)/OFF,

70 Mtrs IR Distance, WDR, BLC, HLC, 130 dB WDR,

H.265 HEVC/H.264/MJPEG, Smart Codec, ONVIF Profile S/G/T/M, Rupees Twenty Eight Thousand Two Hundred

Email, SD card recording, SFTP recording, NAS recording, Nineteen And Paise Forty Only

Digital output,10 Base-T/100 Base-TX Ethernet (RJ-45),

IPv4, IPv6, TCP/IP, HTTP, HTTPS, RTSP/RTP/RTCP, IGMP/

Multicast, SMTP, SNMP, DHCP, NTP, DNS, DDNS, CoS, QoS,

802.1X, UPnP, mDNS(Bonjour), UDP, ICMP, ARP, TLS, SFTP,

IP66, IP67 IK10, BIS ER, STQC

SITC of Camera Back box 5X5 Outdoor camera Rupees Two Hundred Sixteen And Paise Sixty Five

Supply, Installation, Testing & Commissioning of PTZ 5MP IP WDR IR Speed Dome (PTZ) Camera Number Of Pixels (H x V):

x 1944, IR Distance up to 150 m, 30x Optical Zoom, 16x Digital Zoom Auto Focus, 5.3-159mm ,P iris, F1.6-F4.3 50 dB SNR, WDR,

BLC, HLC, 120 dB WDR, 256 preset locations, Pan Speed 0.1° ~ 180°/s, Pan Range 0°-360°, Tilt Speed 0.1° ~ 90°/s, Tilt Range-10°

Rupees Two Lakh(s) Seventy Four Thousand

420 1 H.265 HEVC/H.264/MJPEG, Smart Codec, ONVIF Profile G/S/T, Ea. ₹ 274,350.34 ₹274,350.34

Three Hundred Fifty And Paise Thirty Four Only

Micro SD (up to 256 GB),Alarm Inputs / Outputs 2 In / 2 Out,

3 Number Of Video StreamsAuto Resume to Home position After Power Failure, IP66/IP67, IK10

Supply, Installation, Testing and Commissioning of 8TB Surveillance HDD recording storage Rupees Thirty Two Thousand Three Hundred

Ninety Seven And Paise Eighty Seven Only

Supply, Installation, Testing and Commissioning of 55'' Full HD Resolution Output Display Wall Mount Stand And Accessories

55 Diagonal Size 3,840 x 2,160 (16:9) Resolution, 500 nit Brightness,

Landscape/Portrait, 25% Haze, VA Panel 4,000:1 Contrast Ratio,

NTSC 72% Color Gamut, 24/7 Operation Hour Rupees Ninety Three Thousand Four Hundred

DP 1.2 (1), HDMI 2.0 (3) Port, USB 2.0 x 2 Port, Stereo mini Jack, Twenty Nine And Paise Fifty Five Only

RS232C (In/Out), RJ45, 10W 2ch Speaker,IP5x,0℃~ 40 Temperature,

10~80% Relative Humidity

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Supply, Installation, Testing and Commissioning of Network Video Recorder with maximum 64 IP Cameras

• 64CH support 16 channels simultaneously with synchronized real-time playback.

• Up to 8 MP (4K) resolution live view and playback. • Supports H.265 HEVC, H.264, Smart Codec.

• Notify on triggering built-in video analytic alarms from 35S cameras: Crowd, Multi Loitering, Intrusion, Tampering, Motion and Smart

Motion Detection (SMD).

• Two-way audio/push notification.

• Internal storage supports 8 HDDs expandable up to 80 TB (8 bays) of internal storage.

• HDD Max. Capacity 10 TB

Rupees Three Lakh(s) Forty Two Thousand Four

Hundred Sixty Five And Paise Seventy Five Only

• 10/100/1000 Mbps Ethernet (RJ-45) x

• Resolution Up to 3840 x

• Frame Rate 30 fps,

• IPv4, IPv6, TCP/IP, HTTP, HTTPS, UPnP, RTSP/RTP/RTCP, SMTP, FTP, DHCP, NTP (Secure), DNS, DDNS, IP Filter, P2P, SNMP

• Front x 2, USB 2.0, Back x 1, USB

• Operating Temperature-10°C ~ 55°C (14°F ~ 131°F)

• Storage Temperature–40°C to 60°C (-40°F ~ 140°F)

• Relative Humidity Less than 90% RH

SITC of IP based Digital Public Address and Emergency Sound System Controller certified to International standards of Emergency

Sound System EN 54 and ISO 7240‑16, marked for CE and compliant with the RoHS directive. The system shall be fully IP-network

based and all system devices shall communicate via IP, using a protocol that supports standards AES67 for audio and using AES128

for control with optional encryption and authentication to prevent unauthorized access, misuse and modification of data.It shall be

capable of receiving Dante and AES67 audio streams. The control data part shall be guaranteed by Transmission Control Protocol

(TCP) Layer 4. The system shall support >50 simultaneous channels for music routing and making calls. A system based on a single Rupees Twelve Lakh(s) Eighty Three Thousand

424 1 system controller shall support at least 150 system devices and 250 zones. The system controller shall have dual power supply inputs Ea. ₹ 1,283,701.62 ₹1,283,701.62

Seven Hundred One And Paise Sixty Two Only

and power supplies. It shall keep an internal log of fault events and call events.The system controller shall provide a secure TCP/IP

open interface for remote control and diagnostics.The system controller shall provide front-panel LED indications for the status of power

supplies and the presence of faults in the system upto 2000 faults and provide additional software monitoring and fault reporting

features. It shall be possible to connect a backup system controller for dual redundancy with automatic fail‑over without an additional

hardware or interface.

SITC of the IP based desktop call station for PA system operation. The call station shall be certified for EN 54‑16 and ISO 7240‑16,

marked for CE and be compliant with the RoHS directive.Desktop housing with gooseneck microphone. 4.3" full‑color capacitive touch

display .It shall provide control and routing of live speech calls, stored messages and music with volume control per zone.. Graphical

user interface for optimum user guidance and feedback.Status and fault indicators for voice alarm purposes.Dual Audio over IP‑network Rupees Three Lakh(s) Ninety Five Thousand Nine

425 1 ports for redundant network.It shall receive Power over Ethernet (PoE) via either one or both network connections. The desktop call Ea. ₹ 395,918.18 ₹395,918.18

Hundred Eighteen And Paise Eighteen Only

station shall have a gooseneck cardioid microphone for live calls and a 3.5 mm jack line level input for background music, and provide

software‑configurable signal processing including sensitivity control, parametric equalization and limiting.

Supply, Installation, Testing & Commissioning of 1X500W Class-D Amplifier, which can provide automatic re-settable overcurrent,

overload, overheating, overvoltage, under-voltage and DC protection and High Efficiency Class D Power Amplifier, 500W, 100V/70 Rupees Two Lakh(s) Thirty Three Thousand Nine

Output, with 100 - 240 VAC input and 24 VDC backup power Supply Hundred Eighty Five And Paise Forty Nine Only

Supply, Installation, Testing & Commissioning

- 6W wall mount speaker with excellent speech & music reproduction

- Max Power: 9W,Rated Power: 6Watts, Power Tapping: 6/3/1.5W

Rupees Two Thousand Five Hundred Ninety Three

427 15 - Effective frequency range(-10 dB) : 150 Hz to 15KHz Ea ₹ 2,593.07 ₹38,896.11

And Paise Seven Only

- SPL at rated power (1Khz at 1 m) 93 dB

- Opening Angle 1 KHz / 4 KHz (-6 dB): 199° / 83°

Supply, Installation, Testing & Commissioning of

- 30W Horn speaker with excellent speech reproduction

- Max Power: 45 W W,Rated Power: 30 Watts (30 W / 15 W / 7.5 W)

- Effective frequency range(-10 dB) :490 Hz to 4500 Hz Rupees Six Thousand Nine Hundred Twenty Five

- SPL at rated power (1Khz at 1 m) 115 dB And Paise Ninety Seven Only

- Opening Angle 1 KHz / 4 KHz (-6 dB):B122

-IP rating:- IP

Supply of 2 Core X 1.5 Sq.mm FRLS Multistrand PVC insulated Copper armored cable with all required accessories.

Rupees One Hundred Fifty Eight And Paise Eighty

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Supplying and erecting, commissioning and testing of Diesel Generating set confirming to IS: 4722:1968 & BS:5514 having

continuous rating, 3 phase, 415 volts, 50 cycles A.C. supply comprising of a totally enclosed air/water cooled diesel engine with multi-

cylinders developing suitable BHP not less than following capacity at 1500 RPM with 10% overload for one hour in 24 hours with

standard accessories like fly wheel, lubricating oil cooler, "A" class governor, heavy duty fuel wheel and lubricating oil filter, oil bath air

filler, lubricating oil pressure gauge, end exhaust manifold, standard set of tools with adjustable spanners, screw drivers, cylinder head

to cover, joint cylinder head to exhaust, element lube oil filter, 12 / 24 volts electric starting equipment complete with standard heavy

0 0 duty battery, dynamo, cut-outs, ammeter, necessary wiring, pressure gauge, starter etc and heavy duty Residential type exhaust

silencer and vertical hot air duct both logged with asbestos rope, save oil trays, exhaust piping of required length, standard wall/floor

mounted fuel with level indicator and piping and drip proof alternator, self excited, self regulated, screen protected, with excitation

system, capable of delivering the rated system output at 415 volts, 3 phase, 0.8 PF, 50 Hz, 4 wire, running at 1500 RPM, conforming to

IS-4722- 1968 with voltage regulation +/- 5% of rated voltage from no load to full load. Both the engine and alternator fitted on a

common fabricated steel base plate with antivibration mounting engine and

alternator both connected to each other by flexible flange coupling and with floor/wall mounted control panel box comprising of

voltmeter ammeter, selector switches, ACB / MCCB / MCB of adequate capacity, indicator lamps duly wired with HRC fuses. The

alternator & control panel shall be connected with provided suitable capacity armoured cable and complete with Acoustic enclosure

(canopy) made out of 16 SWG CRCA Sheet, sound absorbing material Rockwool of 64 density & 100 mm thick conforming to IS:8183 /

PU Foam of 40 Density - at least 40 mm. The resin bonded rockwool covered from inside the canopy by perforated sheet with 3/4 mm Rupees Fourteen Lakh(s) Ninety One Thousand

430 1 holes, sound level not more than 75 dB at a distance of 1 mtr, as per PVCT norms. Erection, commissioning and satisfactory testing as Ea. ₹ 1,491,738.69 Seven Hundred Thirty Eight And Paise Sixty Nine ₹1,491,738.69

per requirement with first filling of fuel, oil, etc. with guarantee / Warrantee of complete system for Two years. & with obtaining all Only

necessary certificate from Electrical Inspector. The Capacity and Ratings of DG sets are as below. (P) Continuous rating of 180 KVA

,BHP not less than 235 BHP

Providing & erecting approved make AMF control panel suitable for following size of 3 phase, 415 V., 50 cycles, A.C. diesel generating

set complete of scope as detailed below:

1) Power module: A pair of electromechanically interlocked contactors (for mains & generator) Overload relay for generator contactor

Neutral contactor for mains and generator Power socket for connections. 2) Control and metering module: Line voltage monitor.

Generator voltage monitor Ammeter 3 items attempt start facility. Air circuit breakers/MCB/MCCB of suitable rating for auto/manual Rupees Two Lakh(s) Twenty Two Thousand

operation. Auto/manual switch. Emergency stop push buttons. Manual start push button. frequency meter. Engine hour meter. Two Seven Hundred Fourteen And Paise Nine Only

earthing studs. 3) Protection module: The engine shutdown in the unlikely event of Low lube oil pressure High cylinder head

temperature. V belt failure. 4) Indicators with alarm Load on generator. 5) Indicators Load on mains Engine fails to start . Emergency

stop battery charger. The AMF Panel of following capacity (D) AMF Control Panel for200 KVA/250 KVA3 phase DG Set

Supply, Installation, Testing & Commissioning of 1000 mm length X 80mm Width X 115mm Height RGBW Linear Wall Washer with

Non-integral driver & completely made in India luminaire. Luminaire must use Single LED Array of RGBW ChIPand not descrete

individual LEDs of each colour for colour effect. The luminaire’s shall be made of Extruded aluminum housing powder coated in grey.

The complete luminaire has IP66 & IK07 protection and it comprises of high purity integrated poly carbonate Lens.The LEDs shall have

minimum CRI ≥80 (White LED) & shall have SDCM≤5. The luminaire shall have wattage 36W and shall deliver 1920 lumens. Beam

angle of the Luminaire shall be 15 deg .Fixture shall operating temperature range of 0°C to 45°C. Input Voltage Range of 24V DC,

Integrated DMX Decoder,No need to additional external decoder. The luminaire shall have declared life of 50,000 burning hours at L70. Rupees Sixteen Thousand Five Hundred Eighty Six

432 11 The luminaire shall be compatible with DMX controller. The luminaire shall automatically addressable using hand-held addressing Ea. ₹ 16,586.34 ₹182,449.75

And Paise Thirty Four Only

device. The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16.7million colours.

Luminaire and Driver must be made in India with same brand. Luminaire manufacturer must have In-house NABL accredited lab to

conduct LM79. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer along with technical

bid. LM80 , RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire. Brand name shall be

embossed / engraded on each an every light fixtures. Luminaire and Driver should be Made in India. Luminare, Driver and controller

should be with Equivalent to Wipro LF01-481-ASM-CCWG2

Supply, Installation, Testing & Commissioning of 1000 mm length X 80mm Width X 115mm Height RGBW Linear Wall Washer with

Non-integral driver & completely made in India luminaire. Luminaire must use Single LED Array of RGBW ChIPand not descrete

individual LEDs of each colour for colour effect. The luminaire’s shall be made of Extruded aluminum housing powder coated in grey.

The complete luminaire has IP66 & IK07 protection and it comprises of high purity integrated poly carbonate Lens.The LEDs shall have

minimum CRI ≥80 (White LED) & shall have SDCM≤5. The luminaire shall have wattage 36W and shall deliver 1920 lumens. Beam

angle of the Luminaire shall be 15 deg .Fixture shall operating temperature range of 0°C to 45°C. Input Voltage Range of 24V DC,

Integrated DMX Decoder,No need to additional external decoder. The luminaire shall have declared life of 50,000 burning hours at L70.

The luminaire shall be compatible with DMX controller. The luminaire shall automatically addressable using hand-held addressing Rupees Thirty Six Thousand Three Hundred Ninety

device. The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16.7million colours. Seven And Paise Eighty One Only

Luminaire and Driver must be made in India with same brand. Luminaire manufacturer must have In-house NABL accredited lab to

conduct LM79. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer along with technical

bid. LM80 , RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire. Brand name shall be

embossed / engraded on each an every light fixtures. Luminaire and Driver should be Made in India. Luminare, Driver and controller

should be with same make. Wipro LF01-481-30-CCWG2

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Supply, Installation, Testing & Commissioning of 196mm Dia X 158mm Height RGBW Circular Flood light with Non-integral driver &

completely made in India luminaire. Luminaire must use Single LED of RGBW ChIPand not descrete individual LEDs of each colour for

colour effect. The luminaire’s shall be made of Extruded aluminum housing powder coated in grey. The complete luminaire has IP66 &

IK08 protection and it comprises of high purity integrated poly carbonate Lens.The LEDs shall have minimum CRI ≥80 (White LED) &

shall have SDCM≤5. The luminaire shall have wattage 24W and shall deliver 1320 lumens. Beam angle of the Luminaire shall be

deg .Fixture shall operating temperature range of 0°C to 45°C. Input Voltage Range of 24V DC, Integrated DMX Decoder,No need to

additional external decoder. The luminaire shall have declared life of 50,000 burning hours at L70. The luminaire shall be compatible Rupees Seventeen Thousand Three Hundred One

434 5 with DMX controller. The luminaire shall automatically addressable using hand-held addressing device. The luminaire shall be capable Mtr. ₹ 17,301.27 ₹86,506.34

And Paise Twenty Seven Only

of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16.7million colours. Luminaire and Driver must be made in India

with same brand. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79. The successful bidder must

submit the NABL accreditation certificate for Luminaire manufacturer along with technical bid. LM80 , RoHS compliance issued by LED

luminaire manufacturer, BIS certificate for LED Luminaire. Brand name shall be embossed / engraded on each an every light fixtures.

Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same make. LF04-241-30-CCW-G2

Supply, Installation, Testing & Commissioning of 196mm Dia X 158mm Height RGBW Circular Flood light with Non-integral driver &

completely made in India luminaire. Luminaire must use Single LED of RGBW ChIPand not descrete individual LEDs of each colour for

colour effect. The luminaire’s shall be made of Extruded aluminum housing powder coated in grey. The complete luminaire has IP66 &

IK08 protection and it comprises of high purity integrated poly carbonate Lens.The LEDs shall have minimum CRI ≥80 (White LED) &

shall have SDCM≤5. The luminaire shall have wattage 24W and shall deliver 1320 lumens. Beam angle of the Luminaire shall be

deg .Fixture shall operating temperature range of 0°C to 45°C. Input Voltage Range of 24V DC, Integrated DMX Decoder,No need to

additional external decoder. The luminaire shall have declared life of 50,000 burning hours at L70. The luminaire shall be compatible Rupees Seventeen Thousand Three Hundred One

435 25 with DMX controller. The luminaire shall automatically addressable using hand-held addressing device. The luminaire shall be capable Ea. ₹ 17,301.27 ₹432,531.74

And Paise Twenty Seven Only

of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16.7million colours. Luminaire and Driver must be made in India

with same brand. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79. The successful bidder must

submit the NABL accreditation certificate for Luminaire manufacturer along with technical bid. LM80 , RoHS compliance issued by LED

luminaire manufacturer, BIS certificate for LED Luminaire. Brand name shall be embossed / engraded on each an every light fixtures.

Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same make. LF04-241-60-CCW-G2

Supply, Installation, Testing & Commissioning of 148mm Dia X 149mm Height RGBW Circular Flood light with Non-integral driver &

completely made in India luminaire. Luminaire must use Single LED of RGBW ChIPand not descrete individual LEDs of each colour for

colour effect. The luminaire’s shall be made of Extruded aluminum housing powder coated in grey. The complete luminaire has IP66 &

IK08 protection and it comprises of high purity integrated poly carbonate Lens.The LEDs shall have minimum CRI ≥80 (White LED) &

shall have SDCM≤5. The luminaire shall have wattage 36W and shall deliver 1980 lumens. Beam angle of the Luminaire shall be

deg .Fixture shall operating temperature range of 0°C to 45°C. Input Voltage Range of 24V DC, Integrated DMX Decoder,No need to

additional external decoder. The luminaire shall have declared life of 50,000 burning hours at L70. The luminaire shall be compatible

with DMX controller. The luminaire shall automatically addressable using hand-held addressing device. The luminaire shall be capable Rupees Twenty Five Thousand Five Hundred

of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16.7million colours. Luminaire and Driver must be made in India Ninety Four And Paise Forty Four Only

with same brand. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79.The successful bidder must

submit the NABL accreditation certificate for Luminaire manufacturer along with technical bid. LM80 , RoHS compliance issued by LED

luminaire manufacturer, BIS certificate for LED Luminaire. Brand name shall be embossed / engraded on each an every light fixtures.

Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same make. Wipro make - LF04-361-30-

Supply, Installation, Testing & Commissioning of 148mm Dia X 149mm Height RGBW Circular Flood light with Non-integral driver &

completely made in India luminaire. Luminaire must use Single LED of RGBW ChIPand not descrete individual LEDs of each colour for

colour effect. The luminaire’s shall be made of Extruded aluminum housing powder coated in grey. The complete luminaire has IP66 &

IK08 protection and it comprises of high purity integrated poly carbonate Lens.The LEDs shall have minimum CRI ≥80 (White LED) &

shall have SDCM≤5. The luminaire shall have wattage 72W and shall deliver 3960 lumens. Beam angle of the Luminaire shall be

deg .Fixture shall operating temperature range of 0°C to 45°C. Input Voltage Range of 24V DC, Integrated DMX Decoder,No need to

additional external decoder. The luminaire shall have declared life of 50,000 burning hours at L70. The luminaire shall be compatible

with DMX controller. The luminaire shall automatically addressable using hand-held addressing device. The luminaire shall be capable Rupees Fifty One Thousand One Hundred

of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16.7million colours. Luminaire and Driver must be made in India Seventy Two And Paise Ninety Nine Only

with same brand. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79. The successful bidder must

submit the NABL accreditation certificate for Luminaire manufacturer along with technical bid. LM80 , RoHS compliance issued by LED

luminaire manufacturer, BIS certificate for LED Luminaire. Brand name shall be embossed / engraded on each an every light fixtures.

Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same make.

Wipro make - LF04-841-15-CCW-G2

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Supply, Installation, Testing & Commissioning of 495mm Length X 200 mm Width X 330mm Height Rectangular Flood light with Non-

integral driver & completely made in India luminaire. Luminaire must use Single LED of RGBW ChIPand not descrete individual LEDs

of each colour for colour effect. The luminaire’s shall be made of Extruded aluminum housing powder coated in grey. The complete

luminaire has IP66 & IK08 protection and it comprises of high purity integrated poly carbonate Lens.The LEDs shall have minimum CRI

≥80 (White LED) & shall have SDCM≤5. The luminaire shall have wattage 192W and shall deliver 8640 lumens. Beam angle of the

Luminaire shall be 60 deg .Fixture shall operating temperature range of 0°C to 45°C. Input Voltage Range of 24V DC, Integrated DMX

Decoder,No need to additional external decoder. The luminaire shall have declared life of 50,000 burning hours at L70. The luminaire

Rupees Eighty Seven Thousand Seven Hundred

438 10 shall be compatible with DMX controller. The luminaire shall automatically addressable using hand-held addressing device. The Ea. ₹ 87,777.33 ₹877,773.33

luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16.7million colours. Luminaire and Seventy Seven And Paise Thirty Three Only

Driver must be made in India with same brand. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79.

The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer along with technical bid. LM80

RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire. Brand name shall be embossed /

engraded on each an every light fixtures. Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with

same make. Wipro LF28-212-15-CCW-G2

Supply, Installation, Testing & Commissioning of 152mm Dia X 90 mm Height of 9W RGBW LED Inground light with Non- Integral

driver & completely made in India luminaire. Luminaire must use Single LED of RGBW ChIPand not descrete individual LEDs of each

colour for colour effect. The luminaire’s shall be made of Extruded aluminum housing powder coated in grey. The complete luminaire

has IP67 & IK10 protection and it comprises of high purity integrated poly carbonate Lens.The LEDs shall have minimum CRI ≥80

(White LED) & shall have SDCM≤5. The luminaire shall have wattage 9W and shall deliver 315 lumens. Beam angle of the Luminaire

shall be 60 deg .Fixture shall operating temperature range of 0°C to 45°C. Input Voltage Range of 24V DC, Integrated DMX

Decoder,No need to additional external decoder. The luminaire shall have declared life of 50,000 burning hours at L70. The luminaire Rupees Eight Thousand One Hundred Eighteen

439 8 shall be compatible with DMX controller. The luminaire shall automatically addressable using hand-held addressing device. The Ea. ₹ 8,118.41 ₹64,947.28

And Paise Forty One Only

luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16.7million colours. Luminaire and

Driver must be made in India with same brand. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79.

The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer along with technical bid. LM80

RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire. Brand name shall be embossed /

engraded on each an every light fixtures. Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with

same make. Wipro LI20-101-30-CCW-G2

Supply, Installation, Testing & Commissioning of 16mm X 16mm of 5 meters length RGBW Neon Flexible strIPled light with Non-

Integral driver and with DMX Decoder embedded inside to control each 100mm part separately & with silicone flexible housing with

completely made in India luminaire. The luminaire’s shall be made of Silicon extrusion with high-efficiency, high grade appearance, soft

bend flexibility & Option of Top bend , the same shall be so designed. The luminaire shall have silicon glue between optical cover & LED

chamber to ensure proper IP67 protection. The luminaire shall be equipped with high-power RGBW single LED Chip. The LEDs shall

have minimum CRI ≥80 (White Light) &SDCM≤5 . The luminaire shall have system wattage of 18 meter/watt . Fixture shall operating

temperature range of 0°C to 45°C. The fixture shall have an Non integral driver with input voltage for 220-240 VAC, 50/60Hz. The

luminaire shall have declared life of 50,000 burning hours The luminaire shall be compatible with DMX512 controller. The luminaire Rupees Five Thousand Forty Five And Paise

shall automatically addressable using hand-held addressing device. The luminaire shall be capable of 6-bit control of RED, Green, Blue Eighty One Only

& White (W=4000K) to produce 16.7million colours. Luminaire manufacturer must have In-house NABL accredited lab to conduct

LM79. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer along with technical bid.

Bidder shall submit the following reports along with technical bid LM79 report of the family of luminaire issued by NABL accredited lab,

LM80 issued by LED manufacturer BIS certificate for LED Luminaire.. Brand name shall be embossed / printed on each an every light

fixtures. Wipro LS27-14-TB16-CCWG1

Supply of Isolated, constant Voltage type 240 W LED Driver enclosure in Extruded Aluminium metal enclosure . Driver shall be made

in India compatible for RGBW luminaires with silicone potted and IP66 Protected of same make as luminaire. Output voltage of the

driver 24Vdc. Driver efficiency should be greater than 85% at full load, THD < 10%, PF > 0.95 with Under and Over Voltage Cutoff

Rupees Six Thousand Five Hundred Thirteen And

441 27 Protection and 440V withstand for 8 hours minimum & sould have large operating input voltage range of 140V to 300V AC(nominal Ea. ₹ 6,513.79 ₹175,872.41

Paise Seventy Nine Only

rated voltage – 240V) with 5KV internal surge protection. LED driver shall have inbuilt output short circuit, over voltage protection,

Thermal Shutdown protection.

Supply of Isolated, constant Voltage type 75W LED Driver enclosure in Extruded Aluminium metal enclosure . Driver shall be made in

India compatible for RGBW luminaires with silicone potted and IP65 Protected of same make as luminaire. Output voltage of the driver

24Vdc. Driver efficiency should be greater than 85% at full load, THD < 10%, PF > 0.95 with Under and Over Voltage Cutoff Protection Rupees Three Thousand Five Hundred Eleven And

442 28 and 440V withstand for 8 hours minimum & sould have large operating input voltage range of 140V to 300V AC (nominal rated voltage Ea. ₹ 3,511.09 ₹98,310.61

Paise Nine Only

– 240V) with 5KV internal surge protection. LED driver shall have inbuilt output short circuit, over voltage protection, Thermal Shutdown

protection. Wipro LG34-240-24-10IP66

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Supply, Installation, Testing and commissioning of DMX Master Controller, with completely made in India product. A stand alone

interface for installation in electrical DIN Cabinets with Din rails, which can control from 512 to 1024 and can go up to 2048 channels

on 1, 2 or 4 DMX universes. A robust Stand Alone mode and a wide range of trigger possibilities (RS232, Contacts, Clock, NODE x4

ports, Master/slave), USB-C Networks Ethernet, Internet, WIFI compatible when connected to a router Multiple Zone 10 Zone, play

scene/sequence per time in Stand Alone ,Memory of Micro SD Card ( max. 256 GB ) and 8Mb Internal memory . Art-Net and sACN

from SD card, including triggers (2x512). A master / Save Synchro (32 max wired / 128 max Ethernet) that Commands from the

Contacts (speed, scene, dimmer, zone). Default start scene, Scene priority, Cross Fade time between scenes , Automatic Scene Rupees Two Lakh(s) One Hundred Seventy Nine

443 2 Recovery if the power is cut off and 16-bit and fine channel management. Triggers options of RS232 In/Out (16 characters max for Ea. ₹ 200,179.98 ₹400,359.96

And Paise Ninety Eight Only

RS232 triggers, commands or orders) and UDP / Ethernet triggers and commands (from SDK). Software Requirements with System

Compatibility of Windows, Mac, iOS. Flexible, adaptable mounting options ,Should be provided with light show authoring software,

Direct line voltage power supports 100—240VAC,Minimum five configurable effects, Using light show authoring software to select from

standard five effects, adjust effect settings such as color, speed, and brightness. IP20. Addressing & Programming inclusive and with

Five Year Warranty. Brand name shall be embossed on each and every lighting fixtures. Wipro WL-DIN

Supply, Installation, Testing and commissioning of DMX Splitter, Booster 343 mm Height X 123mm Width X 46 mm Depth with

completely made in India product .Input Power DC 12-24V input, 100-240V, 24VDC plug-in power adaptor included Power

Consumption 4.5W max and of MS/ Aluminium Housing. Power Consumption of 4.5 Approx and Weight of 1.5Kg .The output terminals

should be optically isolated from the input and share a common ground reference. All six output ports should have an independent

output driver and ELV transformer to boost the DMX signal. 1: 6 Way DMX Splitter/Booster ,Optically isolated DMX Input/Outputs,

Individual coil transformer for each output , Surface/Rack/Floor/Celling mountable with provide mounting accessories ,Refined and Rupees Ninety One Thousand Seven Hundred

filtered data , Cable 3 core 0.75sq.mm .Five Year Warrantyof DMX Signal Splitter+Amplifier - One DMX512 signal Input to six DMX512 Forty Nine And Paise Sixteen Only

outputs, Designed to amplify, distribute and isolate DMX signals in short-runs and localised splitting scenarios. Photo-electric isolation

between Input and Output terminals as well as between output terminals among channels. Compensates for any intereference from

external sources like AC lines, Electrical equipment operating close to DMX transmission lines.Compact DIN rail enclosure enables

easy installation inside most enclosures. Wipro WL-SPL

Supply, Installation, Testing and commissioning of 6 push button keypad/panel made of aluminium brushed CNC style modular with

individual push buttons that can trigger the Dry Port contacts.Output Voltage 12 V DC. A completely made in India product. Wipro WL-

445 2 BUTTON 6 Ea. ₹ 20,018.00 Rupees Twenty Thousand Eighteen Only ₹40,036.00

Supply, Installation, Testing and commissioning of DMX Decoder completely made in India product .Input Power DC 12V -24V input

which Outputs 6A/Channels. 100-240V, 24VDC plug-in power adaptor .The number of devices controlled from 001-512 via DIPSwitch.

Connection of DMX (3 pin, 3.5mm pitch screw terminal). Channel bondin capable up to 10A. 8 pin terminal connector current LED

connection. Compact PCB or chassis mounted.All six output ports should have an independent output driver and ELV transformer to

boost the DMX signal. 1: 6 Way DMX Splitter/Booster ,Optically isolated DMX Input/Outputs, Individual coil transformer for each output

, Surface/Rack/Floor/Celling mountable with provide mounting accessories ,Refined and filtered data , Cable 3 core 0.75sq.mm .Five Rupees Thirteen Thousand Eleven And Paise

446 30 Year Warrantyof DMX Signal Splitter+Amplifier - One DMX512 signal Input to six DMX512 outputs, Designed to amplify, distribute and Ea. ₹ 13,011.70 ₹390,350.96

isolate DMX signals in short-runs and localised splitting scenarios. Protection of short circuit, Reverse Polarity, Over Temprature, Over

Voltage and Over Current. Photo-electric isolation between Input and Output terminals as well as between output terminals among

channels. Compensates for any intereference from external sources like AC lines, Electrical equipment operating close to DMX

transmission lines.Compact DIN rail enclosure enables easy installation inside most enclosures. Wipro WL-DMX

IP 65 T CONNECTORS 5 PIN

Rupees One Thousand Two Hundred Fifty Five

And Paise Ten Only

IP 65 S CONNECTORS 5 PIN 1 MTR LENGTH

Rupees One Thousand Two Hundred Fifty Five

And Paise Ten Only

11W, 800 MM High efficient LED with extruded Aluminium housing with PC diffuser.CRI>80, IP65, CCT - 3000K, Ambient temp-0 to

45DegC, Driver efficiency>80%,THD<10%, Powerfactor>0.95, Surge protection-3 kV, Multistage Isolated Constant Current-Constant

Voltage driver and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Luminaire lumen ≥ 220 lumens (20 lm/W) Wipro Rupees Twenty Thousand Eight Hundred Sixty

LB13-131SPKTR30-08 And Paise Two Only

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Supply, Installation, Test & Commissioning of 60W LED Decorative Post Top type luminaire with System efficacy of 120 lm/W (7200

lumens), suitable for external poles of dia. upto 60mm . Luminaire shall be made up of pure polyester power coated RAL7021 pressure

die cast Aluminium housing with tempered glass with polycarbonate lens, capable of producing diffused optics or street optics. All

external hardware must be of SS304 grade. LM 80-08 compliant LEDs of EMC/ceramic package from reputed makes such as

Nichia/Cree/ Bridgelux/ Lumiled/ Osram/Seoul should be provided. LEDs used in the product shall comply with EN 62471 for Photo-

biological safety and certificate for the same from manufacturer shall be provided. Luminaire shall be with IP66 and IK07 protection.

The LED shall be compliant with LM80-08 standard with L70 life of 50000 Hrs tested at maximum current (Complete LM 80 test report

for LED should be submitted for 10000 hrs of testing). The LEDs used should be with CCT of 3000 K, CRI of Minimum 70 and SDCM Rupees Twenty Nine Thousand Two Hundred And

450 2 <5. LEDs must be driven at max 70% of the rated current. MCPCB with Aluminium core and copper thickness of 35 micron to be used Ea. ₹ 29,200.86 ₹58,401.71

Paise Eighty Six Only

for LED mounting. LED Driver shall be silicone potted, Integrated type, Isolated, Constant Current with range 140-280V AC. Driver

Efficiency > 85% & 4 KV internal surge protection with external surge protection of 10KV, Power factor greater than 0.95 and total

harmonic distortion (THD) of less than 10% should be integral to the luminaire. Manufacturer shall have inhouse lab approved by NABL

or ministry of science of govt of India. LM79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above

parameters. Compliance to Indian Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13)

: 2012; IS 16108 : 2012 should be there. Wipro LP15-931-SYM-30-XX

SITC Of decorative illuminated column shall be a cylindrical light feature designed for outdoor architectural enhancement. The unit

shall provide uniform 360-degree ambient illumination with traditional/heritage pattern artwork as shown in the reference image. The

pillar shall be structurally stable, weather-resistant, and suitable for continuous outdoor operation.The illuminated cylinder shall have a

minimum outer diameter of 2 feet (600 mm) and a clear illuminated height of 8 feet (2438 mm). The unit shall be mounted on a base

pedestal of minimum 1 ft 6 in (450 mm) height made of RCC/metal structure, ensuring proper elevation and aesthetic proportion.The

cylindrical body shall be fabricated from powder-coated MS frame / aluminum frame with high-strength acrylic or polycarbonate diffuser

sheets (minimum 3 mm thickness). Materials shall be UV-resistant, corrosion-resistant, and suitable for long-term outdoor

exposure.The illuminated surface shall include printed/laser-etched heritage artwork as per approved design. The diffuser shall ensure

soft, uniform light distribution without hotspots. Color, pattern, and artwork shall be fade-resistant and capable of long-term outdoor Rupees Fifty Thousand Five Hundred Fifty And

retention.The lighting shall be provided using high-efficiency LED modules, minimum IP65 rated, with a color temperature between Paise Fifty Only

2700K and 3000K (Warm White) unless specified otherwise. LEDs shall have a minimum luminous efficacy of 100 lm/W, with a

lifespan of 50,000 hours or more. Driver shall be waterproof, surge-protected, and mounted in an accessible compartment.Each column

shall operate on 230V AC, 50Hz supply. Internal wiring shall be FRLS copper cables. LED driver shall include 10 kV SPD (surge

protection device) suitable for outdoor installations. All electrical connections shall comply with IS standards.The complete luminaire

assembly shall be minimum IP54 for the body and IP65 for the LED modules. All metallic parts shall be earthed properly. The structure

shall withstand typical outdoor wind loads as per IS

Supply, Installation, Testing & Commissioning of 168mm Dia X 80 mm Height 3000K LED Fountain light with Non- Integral driver &

completely made in India luminaire. The luminaire’s shall be made of Aluminum die cast housing duly Powder coated. The complete

luminaire has IP68 & IK08 protection and it comprises of high purity integrated poly carbonate Lens.The LEDs shall have minimum CRI

≥80 (White LED) & shall have SDCM≤5. The luminaire shall have wattage 12W and shall deliver 720 lumens. Beam angle of the

Luminaire shall be 30 deg .Fixture shall operating temperature range of 0°C to 45°C. Input Voltage Range of 24V DC, Integrated DMX

Decoder,No need to additional external decoder. The luminaire shall have declared life of 50,000 burning hours at L70. Luminaire and Rupees Fourteen Thousand Four Hundred Six And

Driver must be made in India with same brand. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79. Paise Eleven Only

The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer along with technical bid. LM80

RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire. Brand name shall be embossed /

engraded on each an every light fixtures. Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with

Supplying, installing, testing, and commissioning of a high-efficiency Air Purifier with integrated Humidifier suitable for 1000–1500 sq.ft.

area, operating on 230V AC, 50Hz. The unit shall have a minimum 7-stage filtration system including Pre-Filter, True HEPA H13 Filter

(99.97% at 0.3 microns), Activated Carbon Filter, TiO2 Photocatalyst, Nano-Organic Layer, Nano-PECO Technology, and UV-

Sterilization for removing dust, allergens, smoke, VOCs and microbes. The purifier shall be equipped with air quality indicator, low-noise Rupees Twenty Four Thousand Four Hundred

operation, 3-in-1 humidity control, touch & remote operation and minimum 6000 hrs filter life. The scope includes delivery, installation, Forty Two Only

testing, commissioning, user demonstration and submission of manuals and warranty documents. Minimum 1-year comprehensive

warranty to be provided.

Item Description Estimated Rate

Item No. Quantity Unit Total Amount

Item No. Quantity Unit Total Amount

Rate in Figures Rate in Words

Providing and fixing bright finish 2 mm thick Stainless steel (Grade 304) 3D letters box size up to 900 mm height in English language

with Acrylic cut work and fixing 3mm acrylic on top of brand Ptglass,astari etc,with all laser and cnc work,including LED lighting

Rupees Fifty Six Thousand One Hundred Five And

454 4 illumination, all material, labour and other hardwares, waste of materials etc fixed in wall at any height including scaffolding etc SM ₹ 56,105.50 ₹224,422.00

Paise Fifty Only

complete As per drawings and design supplied by architect and instruction given by authority and E.I.C.

Total Amount ₹150,671,364.11

Total Amount ₹150,671,364.11

I/We am/are willing to carry out the work at

………………………………………………………………………………….% above/below percent ( should be written in figurs and words ) of the estimated rates mentoined above . Amount of my/our tender work out as under .

Estimate amount Estimate amount

Put to tender Rs ………………………………… Put to tender Rs …………………………………

Deduct :…………….% below Rs.…………………………. Add………………..%above Rs…………………………………..

In Words: Rupees Fifteen Crore Six Lakh(s) Seventy One Thousand Three Hundred Sixty Four And Paise Eleven Only

1 All works shall be carried out as per Public Work Department and other specification of division or as directed.

2 All the columns in the contractor be filled in ink and the total of the entries in the last column should be struck by the contractor under his signature.

3 Rates quoted include clearance of site ( prior commncement of work and its close). In all respect and held good for work under all condition, site, moisture, weather etc.

4 Testing of materials shall be as per statement attached with the specifications. The material shall be tested in GERI testing charges @ 1% of the amount as per the schedule -B shall be recovered from the contractor from the running

5 1% of the construction cost of shall be deducted from bill amount of contract, as per hthe building and other construction worker's welfare cess act. 1996. (Labour & Employment department letter No. C.W.A. - 2004 - 1831- M(3), Dt.

Quantity, rates & working of items are as per estimates and calculation in the schedule "B" are arithmetically checked and found correct.

Dy. Executive Engineer Executive Engineer

(R & B) Sub Division (R & B ) Division