Material supply for construction of Mattahipara Anganavadi no 31 for MGNREGS

Amount

Stone Aggregate(single size): 06 mm nominal size

Interlocking C.C. paver block (60 mm thick, M-30)

G.I. pipes 40 mm dia

Red oxide Zinc chromate primer

Sundries

Welding by electric plant

C.P. Brass angle valve 15 mm

Brass stop-cock 15 mm dia

PVC vent cowl 75 mm dia

PVC pipe 75 mm outer dia 6kgf/cm2

PVC bend 63 mm dia

PVC pipe 63 mm outer dia . 6kgf/cm2

PVC pipe 40 mm outer dia. 10kgf/cm2

PVC pipe 32 mm outer dia. 10Kgf/cm2

Stone Aggregate(single size):20 mm nominal size

Stone Aggregate(single size): 10 mm nominal size

Coarse sand (zone III)

Portland Cement

Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper

Vibrator (Needle type 40 mm)

PVC Socket/coupling 110 mm dia

PVC 45 degree Elbow 110 mm dia

PVC pipe 110 mm outer dia 6kgf/cm2

Brass bib-cock-15 mm dia

Polyethylene water storage tank with cover and suitable locking arrangemnet

Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm

C.I. bracket for wash basin and sinks

Vitreous china flat back wash basin 550x400 mm

15 mm C.P.brass tap

C.P. brass waste 32 mm

Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers

Vitreous china pedestal type wate closet

Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)

Vitreous China orrisa type w.c. pan size 580 mm

100 mm S.C.I. trap with vent heel

Black Japan

Ordinary varnish

Superior copal varnish

Synthetic enamel paint in black or chocolate shade

Plastic emulsion paint

Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre

Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc.

Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black

Vitrified floor tile 50x50 cm

24 mm thick Factory made shutters with styles, rails and panels of PVC extruded sections in white, grey or wooden finish

48 mm X40 mmX1.5 mm thick Factory made door frame of PVC extruded sections in white, grey or wooden finish

Mild Steel round bar above 12 mm dia

Flats up to 10 mm in thickness

Anjili wood scantls

Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)

Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm

Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm

Bright finished or black enameled mild steel screws 40 mm

Bright finished or black enameled mild steel screws 20 mm

Bright finished or black enameled mild steel butt hinges 125x65x2.12 mm

Bright finished or black enameled mild steel screws 50 mm

Iron hooks & eyes 100 mm

200 mm Aluminium aldrop

Anjili wood planks

Fine sand (zone IV)

Structural steel such as tees, angles, channels and R.S. joists

Adjustable span ESO+SI (2.35-3.40)

Adjustable telescopic prop 3 m (2.02-3.75m)

Second class kail wood in planks

Second class kail wood in scantling

Hollock ballies 125 mm diameter

Beam clamp 300-380 mm (450-1070 mm)

Twisted steel/deformed bars

Solid blocks of size 40x20x10cm

Solid blocks of size 30x20x20cm

wall form panel 1250x500 mm

Corner angle 45x45x5 mm 1.50 m long

100 mm channel shoulder 2.5 m long

Double clip (bridge clip)

Single clip

M.S. Tube 40 mm dia

Stone for masonry work

Through and bond stone size 24 x 24 x 39cm

Stone Aggregate(single size): 40 mm nominal size

Augustine Joseph (BID ID -2337528)