Works Advertised Tender for Erection, Dismantaling and Maintenance of HT/LT and Transformer center and Under ground work For Kakanpur Sdn OR Any Other SDn Under Godhra O&M Division. Rates are inclusive of Supply of N B.

HT TAPPING FROM THE EXISTING POLE INCLUDING FIXING OF CROSS ARMS,

CLAMPS ANTI-CLIMBING DEVICES, DANGER BOARD, INSULATORS ETC.

1 9901000001 COMPLETE AND PAINTING OF FABRICATED MATERIALS AND NUMBERING Number

COMPLETE WITH COST OF PAINTS AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF PSC POLES OF 8 *200 KG INCLUDING EXCAVATION OF PIT AND

REFILLING OF EARTH, FIXING OF CROSS ARMS, TOP FITTING CLAMPS ANTI-

CLIMBING DEVICES, INSULATORS ETC. COMPLETE AND PAINTING OF

2 9902010001 FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST Number

OF PAINTS AS PER STANDARD SPECIFICATION BUT EXCLUDINGERECTION OF

GUY SET AND EARTHING - HT line

ERECTION OF PSC POLES OF 8 *200 KG INCLUDING EXCAVATION OF PIT AND

REFILLING OF EARTH, FIXING OF CROSS ARMS, TOP FITTING CLAMPS ANTI-

CLIMBING DEVICES, INSULATORS ETC. COMPLETE AND PAINTING OF

3 9902010002 Number

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST

OF PAINTS AS PER STANDARD SPECIFICATION BUT EXCLUDINGERECTION OF

GUY SET AND EARTHING - LT Line

ERECTION OF STEEL POLES OF 8 TO 9 & 11 METERS INCLUDING EXCAVATION

OF PIT AND REFILLING OF EARTH, FIXING OFCROSS ARMS, TOP FITTING

CLAMPS ANTI-CLIMBING DEVICES, DANGER BOARD, INSULATORS ETC.

4 9902010002 COMPLETE AND PAINTINGOF STEEL POLE, FABRICATED MATERIALS USED Number

ON THE POLEAND NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET ANDEARTHING.

ERECTION OF STEEL POLE OF 13 METERS FOR RAILWAYCROSSING ON

BG/MG/NG LINE FOR 0.400/11/22KV OVERHEADLINES I.E INCLUDING

EXCAVATION OF PIT & REFILLING OFEARTH, FIXING CROSS ARMS, TOP

5 9902010005 FITTING CLAMPS,ANTI-CLIMBING DEVICES DANGER BOARD, INSULATORS Number

ETC. COMPLETE AND PAINTING OF STEEL POLES, FABRICATEDMATERIALS

USED ON THE POLES AND NUMBERING WITH COSTOF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND

ERECTION OF DOUBLE POLE STRUCTURE OF 8 METERS 200 KG PSC POLES

INCLUDING EXCAVATION OF PITS & REFILLING OFEARTHING, FIXING OF

CHANNELS, SUPPORTING ANGLES,CLAMPS, ANTI-CLIMBING DEVICES

6 9902020001 DANGER BOARDS,INSULATORS ETC.COMPLETE AND PAINTING OF Number

FABRICATEDMATERIALS USED ON THE POLES AND NUMBERING WITH COST

OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF

GUY SETS AND EARTHING. (W/O AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE OF 8 TO 9 METERS STEEL POLE

INCLUDING EXCAVATION OF PITS & REFILLING OFEARTH, FIXING OF

CHANNELS, SUPPORTING ANGLES, CLAMPS,ANTI-CLIMBING DEVICES

7 9902020007 DANGER BOARDS, INSULATORS ETC.COMPLETE & PAINTING OF Number

POLES,FABRICATED MATERIALSUSED ON THE POLES AND NUMBERING WITH

COST OF PAINTSAS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND EARTHING. (W/O AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB SWITCH,

DO FUSES OF 8 MTRS 200 KG PSC POLES INCLUDING EXCAVATION OF PITS

AND REFILLING OF EARTH,FIXING OF CHANNELS SUPPORTING ANGLES,

CLAMPS, ANTI-CLIMBING DEVICES, DANGER BOARDS, INSULATORS,DOFUSES

8 9902020006 Number

ETC. COMPLETE AND PAINTING OF FABRICATEDMATERIALS USED ON THE

POLES AND NUMBERING WITH COSTOF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDINGOF ERECTION OF GUY SET AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OFAB SWITCH,

DO FUSES, 9 TO 11 METERS STEEL POLES INCLUDING EXCAVATION OF PITS

AND REFILLING OF EARTH, FIXING OF CHANNEL, SUPPORTING ANGLES,

CLAMPS, ANTI-CLIMBING DEVICES , DANGER BOARDS, INSULATORS, ETC.

9 9902020010 COMPLETE AND PAINTING OF POLES FABRICATED MATERIALS USED ON THE Number

POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OFAB SWITCH,

DO FUSES, 13 METERS STEEL POLES INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, FIXING OF CHANNEL, SUPPORTING ANGLES, CLAMPS,

ANTI-CLIMBING DEVICES , DANGER BOARDS, INSULATORS, ETC. COMPLETE

10 9902020019 Number

AND PAINTING OF POLES FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING OF DO FUSES,

TRANSFORMERS, LIGHTENINGARRESTORS, DISTRIBUTION BOX ETC. OF

METERS 200 KG PSC POLES INCLUDING EXCAVATION OF PITS AND REFILLING

OF EARTH, CARTING OF TRANSFORMERS FROMSTORES TO SITE, FIXING OF

CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS ARMS CLAMPS,

11 9902030001 ANTICLIMBING DEVICESDANGER BOARDS, CONDUCTOR AND CABLE WIRING Number

ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USEDON THE

POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OFGUY SETS AND EARTHING.

SCHEDULE - B

Works Advertised Tender for Erection, Dismantaling and Maintenance of HT/LT and Transformer center and Under ground work For

Kakanpur Sdn OR Any Other SDn Under Godhra O&M Division. Rates are inclusive of Supply of N B.

SR. Item Code

Description of Work Unit Rate in Rs.

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OFAB SWITCH,

DO FUSES TRANSFORMERS, LIGHTENING ARRESTORS, DISTRIBUTION BOX

TO 9 & 11 METERS STEEL POLES INCLUDING EXCAVATION OF PITS &

REFILLING OF EARTH CARTING OF TRANSFORMERS FROM STORE TO SITE,

12 9902030012 FIXING OF CHANNELS SUPPORTING ANGLES, BRACING, CROSS Number

ARMS,CLAMPS, ANTICLIMBING DEVICES, DANGER BOARDS,CONDUCTOR AND

CABLE WIRING ETC. COMPLETE AND PAINTING OF POLES FABRICATED

MATERIALS USED ON THE POLES AND NUMBERING AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTIONS OF GUY SETS AND EARTHING.

ERECTION OF SINGLE POLE STRUCTURES WITH MOUNTING OF DO FUSES,

TRANSFORMERS, LIGHTENINGARRESTORS, DISTRIBUTION BOX ETC. OF

METERS 200 KG PSC POLES INCLUDING EXCAVATION OF PITS AND REFILLING

OF EARTH, CARTING OF TRANSFORMERS FROM STORES TO SITE, FIXING OF

13 9902030016 CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS ARMS CLAMPS, Number

ANTICLIMBING DEVICESDANGER BOARDS, CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USEDON THE

POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OFGUY SETS AND EARTHING.

ERECTION OF GUY SETS INCLUDING EXCAVATION OF PITS & REFILING OF

EARTH, AS PER STANDARD SPECIFICATION WITH STAY CLAMPS STAY

14 9902040001 WIRES, ANCHOR ROD, TURN BUCKLE, EYE BOLT, GUY INSULATOR, CEMENT Number

CONCRETE BLOCK, ETC., BUT EXCLUDING CONCRETING.

CONCRETING/ MUFFING OF POLES GUY ETC., INCLUDING COST OF

15 9905010001 CEMENT,AND METAL (1:2:4) AND WATER ETC., AS PER C.C.M-20 GRADE CMT

STANDARD SPECIFICATION .

ERECTION COIL TYPE EARTHING INCLUDING COST OF COAL & SALT, ETC.BUT

WITHOUT COST OF G I WIRE & COIL. AS PER STANDARD SPECIFICATION

16 9902040002 KG SOLT + 10KG COAL.GI WIRE TO BE PASSED THROUGH PVC RIGID PIPE Number

FOR SUITABLE LENGTH AS PROVIDED BY THE S/DN ENGR. IN CHARGE

STRINGING OF 30 MM2 ACSR/34MM2 ,55MM2,AAA CONDUCTOR, FOR 11/22 KV ONE COND

17 9903000001 & L.T. LINE INCLUDING FIXING OF INSULATORS, BINDING, JUMPERING, ETC.

SRTINGING OF 100 MM2, ACSR/DOG CONDUCTOR, FOR 11 KV & L.T.LINES

18 9903000002 INCLUDING FIXING OF INSULATORS, BINDING, JUMPERING, ETC.

STRINGING OF ABC OF FOLLOWING SIZES INCLUDING FITTING OF ALL

ACCESSORIES I.E. SPECIAL DESIGN SUSPENSION/TENTION CLAMP. FIXING

OF CROSS ARM, LT SHACKLE INSULATOR, ETC FOR FIXING OF MESSENGER

19 9903000006 WIRE COMPLETE, AS REQUIRED & DIRECTED BY ENGINEER-IN-CHARGE. KM

STRINGING OF ABC OF FOLLOWING SIZES INCLUDING FITTING OF ALL

ACCESSORIES I.E. SPECIAL DESIGN SUSPENSION/TENTION CLAMP. FIXING

OF CROSS ARM, LT SHACKLE INSULATOR, ETC FOR FIXING OF MESSENGER

20 9903000005 WIRE COMPLETE, AS REQUIRED & DIRECTED BY ENGINEER-IN-CHARGE. KM

STRINGING OF 11 KV ABC OF FOLLOWING SIZES IN RURAL AREA INCLUDING

FIXING OF CROSS ARM, SPECIAL DESIGN SUSPENSION/TENTION CLAMP,

BINDING TO PIN INSULATOR, PREPARING SHACKLE POINT JUMPERS ETC AS

21 9903000007 REQUIRED & DIRECTED BY ENGINEER-IN-CHARGE. KM

STRINGING OF 11 KV ABC OF FOLLOWING SIZES IN URBAN AREA INCLUDING

FIXING OF CROSS ARM, SPECIAL DESIGN SUSPENSION/TENTION CLAMP,

BINDING TO PIN INSULATOR, PREPARING SHACKLE POINT JUMPERS ETC AS

22 9903000007 REQUIRED & DIRECTED BY ENGINEER-IN-CHARGE. KM

23 9906000002 PROVIDING GUARDING TO HT LINE ON ROAD/RAIL CROSSING MTR

24 9906000001 PROVIDING GUARDING OF LT LINE ON ROAD/RAIL CROSSING MTR

25 9901000002 LT LINE TAPPING SINGLE PHASE. Number

26 9901000003 LT LINE TAPPING THREE PHASE. Number

LAYING OF OVER HEAD LT CABLE FOR ROAD CROSSING,HT LINE CROSSING

AND TELEPHONE LINE CROSSING ETC.(PER SPAN)

Dismentalling of all size (8,9,11,13…mtrs.) of RSJ (girder) Poles including

28 9907000006 dimentalling of relevant channels, cross arms insulators, jumpers, binding, earthing Number

etc. INCLUDING Cr. IN STORE

Dismentalling of PSC Poles including dimentalling of relevant channels, cross arms

29 9907000002 Number

insulators, jumpers, binding, earthing etc. INCLUDING Cr. IN STORE

30 9907000009 Dismentalling of conductor from line. INCLUDING Cr.IN STORE KM

31 9907000012 Dismentalling of 8 MTR PSC D.P.Structure. INCLUDING Cr. IN STORE Number

Dismentalling of 8 TO 9 METER STEEL POLE D.P.Structure. INCLUDING Cr. IN

32 9907000012 Number

SCHEDULE - B

Works Advertised Tender for Erection, Dismantaling and Maintenance of HT/LT and Transformer center and Under ground work For

Kakanpur Sdn OR Any Other SDn Under Godhra O&M Division. Rates are inclusive of Supply of N B.

SR. Item Code

Description of Work Unit Rate in Rs.

Dismentalling of A.B.Cable from line. INCLUDING Cr. IN STORE OF FOLLOWING

33 9907000025 SIZES:A: 3 X 50MM2+16MM2+1X 35MM2 B: 3 X 35MM2+16MM2+1X 25MM2 KM

Dismentalling of A.B.Cable from line. INCLUDING Cr. IN STORE OF FOLLOWING

34 9907000025 SIZES: A : 1 X 35MM2 + 1 X 25MM2 KM

Dismentalling of ABC OF FOLLOWING SIZES INCLUDING FITTING OF ALL

ACCESSORIES I.E. SPECIAL DESIGN SUSPENSION/TENTION CLAMP. FIXING

35 9907000025 OF CROSS ARM, LT SHACKLE INSULATOR, ETC FOR FIXING OF MESSENGER KM

WIRE COMPLETE, AS REQUIRED & DIRECTED BY ENGINEER-IN-CHARGE.

(i) 1x35mm2+1x25mm2 (ii) 1x35mm2+35mm2 Rural Area.

Dismentalling of ABC OF FOLLOWING SIZES INCLUDING FITTING OF ALL

ACCESSORIES I.E. SPECIAL DESIGN SUSPENSION/TENTION CLAMP. FIXING

36 9907000025 OF CROSS ARM, LT SHACKLE INSULATOR, ETC FOR FIXING OF MESSENGER KM

WIRE COMPLETE, AS REQUIRED & DIRECTED BY ENGINEER-IN-CHARGE.

(i) 1x35mm2+1x25mm2 (ii) 1x35mm2+35mm2 Rural Area.

INSTALLATION OF ENERGY METER & MMB/SMC BOX WITH ELECTRICAL

37 9911000057 WIRING ON TRANSFORMER Number

PROVIDING SINGLE PHASE SERVICE CONNECTION WITH PVC 2.4/4.0 MM2

TWIN CORE CABLE FROM TERMINAL POLE TO METERING POINT INCLUDING

38 9904010002 Number

FIXING OF METER & COMPLETE WORK AS PER STANDARD SPECIFICATION

BUT EXCLUDING COST OF MATERIALS.

PROVIDING THREE PHASE 4 WIRE SERVICE CONNECTION WITH PVC

4MM2/10MM2 FOUR CORE CABLE FROM TERMINAL POLE TO METERING POINT

39 9904010001 INCLUDING FIXING OF METER & COMPLETE WORK AS PER STANDARD Number

SPECIFICATION BUT EXCLUDING COST OF MATERIALS.

CARTING OF PSC POLE AT DESTINATION (ABOVE 5 KM)

40 9909000001 per pole

41 9909000006 CARTING OF RSJ POLE AT DESTINATION(9 & 11 Mtr) (ABOVE 5 KM) per pole

AUGMENTATION/DEAUGMENTATION OF TRANSFORMER(ANY CAPACITY)

42 9908000049 INCLUDING TRANSPORTATION & CREDIT OF OLD TRANSFORMER AT S/DN Number

Moulding of cable joint (St.joint,indoor and outdoor) for XLPE cable- labour

43 9902050002 charges,for Urban area. Number

Moulding of cable joint (St.joint,indoor and outdoor) for XLPE cable- labour

44 9902050002 charges,forRural area. Number

ADDITIONAL COST FOR EXCAVATION OF PIT IN HARD ROCK AREA FOR

ERECTION OF POLE/ GUY ETC. AS PER STANDARDSPECIFICATION OVER &

45 9902040010 ABOVE NORMAL COST COVEREDAGAINST EXCAVATION OF PIT UNDER Number

NORMAL SOIL FORERECTION OF POLE,GUY, DOUBLE POLE STRUCTURE

EARTHING WITH THE APPROVAL OF SUPDT.ENGINEER.

46 9911000002 PLUMBING/STRAIGHTENING OF PSC POLE Number

Dismentalling of HT ABC (Unbundling & Fixing of 95 mm2/71mm2 HT ABC on

existing Pole)

Unbundling of HT ABC(Unbundling & Fixing of 95 mm2/71mm2 HT ABC on existing

Stringing of Unbundled HT ABC(Unbundling & Fixing of 95 mm2/71mm2 HT ABC on

49 9903000008 per Cond

existing Pole)

Proving & Fixing of HEAT SHRINKABLE TYPE JOINTING KIT-OUT DOOR CABLE

50 0411000071 Number

JOINT FOR A.B. CABLE(95 mm sq)

Proving & Fixing of HEAT SHRINKABLE TYPE JOINTING KIT-OUT DOOR CABLE

51 0411000072 Number

JOINT FOR A.B. CABLE(70 mm sq)

11 KV INDOOR CABLE BOX FOR 95 SQMM XLPE CABLE

52 0411000055 Number

11 KV INDOOR CABLE BOX FOR 185 SQMM XLPE CABLE

53 0411000015 Number

11 KV INDOOR CABLE BOX FOR 240 SQMM XLPE CABLE

54 0411000056 Number

11 KV OUTDOOR CABLE BOX FOR 95 SQMM XLPE CABLE

55 0411000057 Number

11 KV OUTDOOR CABLE BOX FOR 185 SQMM XLPE CABLE

56 0411000006 Number

11 KV OUTDOOR CABLE BOX FOR 240 SQMM XLPE CABLE

57 0411000058 Number

11KV STRAIGHT THROUGH JOINT FOR 95 SQMM XLPE CABLE

58 0411000059 Number

11KV STRAIGHT THROUGH JOINT FOR 185 SQMM XLPE CABLE

59 0411000074 Number

11KV STRAIGHT THROUGH JOINT FOR 240 SQMM XLPE CABLE

60 0411000060 Number

Supply of HDPE pipe for laying 11KV XLPE cable 110mm nominal diameter & 5.3 to

61 9913000015 mm thickness as per IS:4984 meter

SCHEDULE - B

Works Advertised Tender for Erection, Dismantaling and Maintenance of HT/LT and Transformer center and Under ground work For

Kakanpur Sdn OR Any Other SDn Under Godhra O&M Division. Rates are inclusive of Supply of N B.

SR. Item Code

Description of Work Unit Rate in Rs.

62 9913000014 Supply of medium grade GI pipe of size 4" dia(Including clamping the cable with pole) meter

Excavation of trench 0.5Mtr. Wide and 1 Mtr. Deep for laying of HT/LT underground

cable of size upto 300Sq.mm PILC or XLPE.(The cable should be laid on bed of sand

63 9913000036 and to cover cable with half round RCC pipe 6" internal dia and length of one meter meter

along with each bottom and top.) The entire trench there after should be refilled with

earth dully rammed up to ground level As perDrg.No MGVCL/Tech/UG Cable/01/12-

Laying of U/G 11KV XLPE cable by Push & Pull method (MANUAL / BY Horizontal

Directional MACHINE)thru with HDPE pipe 110mm Diameter,5.3 to 6 mm thickness

64 9913000042 or 4" diameter GI Pipe without damaging surface of the road by horizontal boring / meter

drilling method (Excluding cost of HDPE pipe 4"GI Pipe) as per Drawing and

specification

Laying/Relaying of cable in Cable trench & from ground level to pole structure for

65 9913000038 providing outdoor cable joints. meter

Laying / Relaying XLPE/PILC cable by digging of pits, removal of old cable and laying

66 9913000013 of new cable on sand bad as per item No.1 above. meter

Supply of half round RCC hume pipe 6" internal dia & length of 1 Mtr.

67 0302000078 Number

Supply of sand 0.300x0.500X1.00mtr (Layer at bottom of cable trench approximately

68 9913000049 0.15cmt) As perDrg.No MGVCL/Tech/UG Cable/01/12-13 RMTR

Add : Charges for digging of tar road for laying of cables over and above digging of pit

69 9913000041 in normal soil as per Sr.No. 1 meter

providing & supplying, fixing route marker of C.C.1:2:4, 150mm x 150mmx750mm

concrete stone (MGVCL marked with approved yellow colour) embedded in Earth

70 9913000009 at least 300mm below the G.L. & 450mm above G.L. at distance approx. 100 Mtr. Number

or as directed by engineer incharge.(This Includes material & Labour charges for

excavation &refilling

Supply & fixing labour charge for providing Bricks (size 9"X 4"X3")layer (4" side layer

10 Nos of Bricks per meter length of cable Top side + 9" side layer 4.5 nos X

71 9501060079 side=10+9=19 Nos /Running Meter) for 11KV XLPE Cable Mechanical protection Number

(only top sied layer) at cable ring (loop) location, as per instruction of Engineer in

Charge @ Rs. 4/- per Bricks current market rate F.O.R Site delivery

72 9902010006 Erection of Support pole for stay PSC(Stud pole) Number

73 9902010007 Erection of Support pole for stay STP/RSJ(Stud pole) Number

74 9911000190 RE-JUMPERING OF HT/LT LINE FOR SHACKLE POLE PER POLE

Replacement of pole mounted 1-Ph/ 3 Ph . Service Connection Box including

75 9911000221 Number

reconnecting all connectio

76 9911000229 PIN BINDING OF 11KV PIN INSULATOR PER POLE

77 9911000230 PIN BINDING OF LT LINE PIN OR SHACKLE INSULATOR PER POLE

78 9908000003 REPLACEMENT OF 11 KV DISC INSULATOR Number

79 9908000166 REPLACEMENT OF LT PIN /SHACKLE INSULATOR Number

80 9911000226 Refixing of V cross -arms in proper position Number

81 9908000001 REPLACEMENT OF V CROSS - ARMS Number

82 9908000051 REPLACEMENT OF TOP FITTING Number

83 9911000226 Refixing of top fitting in proper position Number

84 9908000007 REPLACEMENT OF LT CROSS - ARMS Number

Replacement of old jumpers by new jumper/binding/lugs etc. from L.A. to D.O. Fuse or

85 9908000004 Per Jumper

D.O. Fuse to T/C

Replacement of 11KV PIN insulator by new Pin Insulator

86 9908000002 Number

/Composite Pin Insulator

Re-stringing of HT & LT line (55mm2 & 34mm2) conductors/ Coated conductor with

new double pin binding per span

Re-stringing of 11KV Aerial Bunch Cable (All size) per span

with accessory fittings

89 9911000009 Cutting of Tree branches obstructing HT/LT line on one tree Per Tree

Per Day per

90 9911000189 Cutting of bigger size of Tree branches / Whole tree obstructing HT/LT line

PROVIDING DO FUSE OR AB SWITCH ON DP (FOR ONE SET) WITH

91 9908000169 FABRICATION & COLOUR CODE JUMPER,INCLUDING PROPER ALIGNMENT OF Number

AB SWITCH CONTACTS

NUMBERING THE POLE WITH PAINT BY PREPARING BACK GROUND OF

REQUIRED HEIGHT SURFACE OF ONE COLOUR AND HAVE LETTERING ( 2" & 3"

92 9911000001 HT ) AS DIRECTED BY IN CHARGE ENGINEER .THE TWO COLOUR SHOULD Number

HAVE BEEN SLECTED AS TO HAVE CONTRAST FOR PROPER

READABILITY.(REQUIRED COLOUR TO BE PROVIDED BY CONTRACTER)

FIXING OF SMC (1-Ph) AT CONSUMER INSTALLATION ( INCLUDING COST OF

93 9911000222 Number

FIXING OF SMC (3-Ph) AT CONSUMER INSTALLATION ( INCLUDING COST OF

94 9911000223 Number

95 9908000023 REPLACEMENT OF METER (1 PH) WITH WIRING - Rural Number

SCHEDULE - B

Works Advertised Tender for Erection, Dismantaling and Maintenance of HT/LT and Transformer center and Under ground work For

Kakanpur Sdn OR Any Other SDn Under Godhra O&M Division. Rates are inclusive of Supply of N B.

SR. Item Code

Description of Work Unit Rate in Rs.

96 9908000023 REPLACEMENT OF METER (1 PH) WITH WIRING - Urban Number

97 9911000227 PROVIDING (PAINTING ) CONSUMER No ON SMC/MMB - Rural Number

98 9911000228 PROVIDING (PAINTING ) CONSUMER No ON SMC/MMB - Urban Number

REPLACEMENT OF SINGLE PHASE OLD SERVICE BY NEW SERVICE INCL

99 9908000016 .SHORTFALL REEL INSULATORS, EGG INSULATORS, NAILS, FIXING FASTNERS Number

100 9902040007 Providing lighting arrestor on DP Structure Number

101 9911000007 Tightening of loose stay wire Number

REPLACEMENT OF OLD DISTRIBUTION BOX 200 KVA & ABOVE WITH MAKING

102 9908000010 Number

ALL CONNECTIONS CRIMPING OF LUGS,NEUTRAL ETC

REPLACEMENT OF OLD DISTRIBUTION BOX UP TO 100 KVA & ABOVE WITH

103 9908000011 Number

MAKING ALL CONNECTIONS CRIMPING OF LUGS,NEUTRAL ETC

104 9911000054 PROVIDING LINE SPACER BETWEEN LT LINE CONDUCTOR WITH BINDING Number

105 9911000070 Petrolling of HT line & submission of summary Report Per Pole

106 9911000071 Petrolling of LT line & submission of summary Report Per Pole

Fixing of V cross arm, Top fitting with jumpering (Unbundling & Fixing of

mm2/71mm2 HT ABC on existing Pole)

Fixing of Pin Insulator with Spindle(Unbundling & Fixing of 95 mm2/71mm2 HT ABC

on existing Pole)

Fixing of Shackle Insulator with Hardware(Unbundling & Fixing of 95 mm2/71mm2 HT

ABC on existing Pole)

110 2615000027 Supply of Wedge Type Tension assembly with IPC Number

111 2615000028 Supply of Helical Tie Number

112 0411000077 Supply of Mid span Joints (Tension Joints) Number

113 0411000078 Supply of IPC for Networking or Branching or Looping IPC Type 2 Number

114 0411000078 Supply of IPC for Bare to Covered interconnection IPC - Type 1 Number

115 0411000078 Supply of IPC with with Aluminum Ball for earthing IPC Type 3 Number

Laying,Testing & commissioning of Specially designed 11 KV AAAC/AL-59 Medium

Voltage Covered conductor as per the technical specifications (with accessories)

Grand Total

Grand Total

The rates are asked above only on percentage basis against estimated amount i.e. item wise rates stated in the Schedule-B. The tender

offer must be specifying the percentage either above or, below to the estimated amount and it should be clearly specified both in figures and

words. Above quantity are approximate and may vary as per requirement.

1 Above all Rates are inclusive of Bolt and Nut. Contractor to provide Bolt Nut as per company's specification.

Schedule quantity may be increase or decrease but total order value will not increase. Rates as per Labour cost data 2024

considered.

3 Contractor have to carry out maintenance work of 20 % of total order value issued.

Note: As far as possible there should not be a situation where re carting is required for more than 5 Kms. Poles should be carted

from Pole factory nearer to the pole requirement, However in exceptional circumstances if re-carting is required for more than 5 Kms

up to 10 Kms then the carting rates specified may be paid with specific justification of requirement of carting for more than 5 Kms

and with prior approval of EE of division”.

5 On receipt of Sub work Order, immediately contact Engineer In charge of Concern S/dn for line marking of erection work.

6 Work should be carried out under supervision of authorized MGVCL staff only.

7 T.S wise / Work wise material account of sub works order must be given separately.

8 The materials requisition (M.R) should be collected from Concern Sub Division office.

"If work is delay for non-availability of any material or objection of line erection work, must be inform to Concern S/dn office in

10 For extension of time limit of work order, you have to submit written request letter with valid genuine reason before one month.

11 On completion of work, you have to credit all balance materials to sdn. store

You have to prepare & submit works bill for Above work within 07 days with material inventory sheet & Material account sheet &

MR/CR/Gate pass copy & HT/LT/TC erected network sketch"

SCHEDULE - B

Works Advertised Tender for Erection, Dismantaling and Maintenance of HT/LT and Transformer center and Under ground work For

Kakanpur Sdn OR Any Other SDn Under Godhra O&M Division. Rates are inclusive of Supply of N B.

SR. Item Code

Description of Work Unit Rate in Rs.

"In case of any excess work required while actual execution of work you have to give written intimation to this office &No excess work

should be carried out without prior written permission / approval from competent authority."

14 For non -painting of RSJ Pole Rs. 1132/- charge deducted from bill amount.

"For non -painting of PSC Pole fabrication Rs. 179/- per pole & for PSC DODP Rs. 380/- and for PSC TC DP fabrication Rs 776/- per

DP will be deducted from bill."

16 For non-painting of Pole numbering Rs. 60/- will be deducted per pole.

17 For live electric line crossing work, work should be carried out after Power cut-off and earthing of Line.

18 For any excavation/digging work, contractor has to take permission/NOC from “Call before you Dig” application

19 Mandatory Use of Pole Errection Devices / Machines for pole installation.

ENGINEER(O&M)

SIGNATURE OF CONTRACTOR

GODHRA DIVISION

(With Rubber Stamp & Date)