CA NO CWE/AF AMB/AMB-56/2019-20 SPECIAL REPAIR TO CERTAIN BUILDINGS AT GREENFIELD AREA AT AF STATION AMBALA UNDER GE AF AMBALA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off /disposal of the material outside the MD land complete all as specified and directed.

Dismantling of stone slabs/ floor and wall tiles of any description or thickness as in floors, aprons etc laid and bedded in any mortar including rubbish off /disposal of the material outside the MD land complete all as specified and directed.

Demolition of plain cement concrete,un-reinforced, in ground floor and paving not exceeding 15 cm thick below or above ground floor including rubbish off /disposal of the material outside the MD land complete all as specified and directed.

Dismantling of wall or ceiling board any thickness, fibre,pulp, insulation etc, fixed in any position with screws including cover fillets including rubbish off /disposal of the material outside the MD land complete all as specified and directed.

Demolition of RCC, of any description and in any position inluding cutting of reinforcement to facilitate demolition and rubbish off /disposal of the material outside the MD land complete all as specified and directed.

Dismantling of brick work built in cement mortar including all quoins, pillars etc but excluding ashlar facings, dressed stone work and precast articles and rubbish off /disposal of the material outside the MD land, after reusing in the work complete all as specified and directed.

Dismantling of brick tiles or concrete tiles single layers on roof and rubbish off /disposal of the material outside the MD land, after reusing in the work including stacking of servicable brick tiles complete all as specified and as directed.

Demolition of mud phuska on roofs, any thickness including mud plastering,whether full thickness removed or only a part thereof and rubbish off /disposal of the material outside the MD land complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water including removal of debries outside the MD land complete all as specified and directed.

Taking up or down steel water tubing and connections for refixing or removal from site for 15 mm bore pipe complete all as specified and directed.

Taking up or down steel water tubing and connections for refixing or removal from site for 20 mm bore pipe complete all as specified and directed.

Taking down chowkhats or frames n.exc 1.5 sqm each with shutters without taking off shutters from the frame and removing from site, including cutting holes for taking out hold fasts and making good disturbed portion in cement mortar 1:3, complete all as specified and as directed

Taking down chowkhats or frames exc 1.5 but n.exc 4 sqm each with shutters without taking off shutters from the frame and removing from site, including cutting holes for taking out hold fasts and making good disturbed portion in cement mortar 1:3, complete all as specified and as directed

Cutting chases on brick wall, pinning in, making good to facing where required and pointing in CM 1:3 to ends or edges of landing steps cills, sunshades, shelves, lintels etc, and cutting chases for concealed water tubing and making good n.exc 10cm girth complete all as specified and as directed

Taking down shutter exc 1 sqm but n.exc 2 sqm each, window shutters, cup board shutter, show case shutter, drawer etc , easing , adjusting piano type hinge, knob, handle and refixing in same or other location with and including new butt hinges of suitable size & Nos with new screws complete all as specified and as directed

Taking down rolling shutter exc 8 sqm but n.exc 25 sqm each, easing , greasing, lubricating all the parts and refixing in same or other location with and including providing new tension spring of suitable size complete all as specified and as directed

Petty repair to aluminium door/window/cupboard/show case shutter, drawer shutter n.exc 2 sqm each, easing , adjusting piano type hinge, knob, handle and refixing in same or other location with and including new butt hinges of suitable size & Nos with new screws, rubber gasket complete all as specified and as directed

Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and as directed

Roughening surface of old concrete floor by picking sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry @ 3.0 Kg/Sqm complete all as specified and as directed

Disconnecting water tanks from any position/location, of any make etc of capacity exc 500 Ltr & n.exc 1000Ltr with ball valve and pipe line connection & refixing after cleaning including removing all scale & dirt etc from tanks & month of circulating pipe etc complete all as specified and as directed.

Material and labour for rough cast plaster with and including 15 mm thick rendering in cement mortar 1:3 on brick wall or concrete surfaces as apecified in clause 14.22 of SSR part-I complete all as specified and as directed. Notes :- (i) After applying the under coat of cement and sand mortar 1:3 not less than 10 mm thick and while it is still in plastic state, the rough cast mixture consisting of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even. (ii) The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregates are thoroughly covered.

Material and labour for Anti termite treating the soil along external perimetre of building below ground level or masonry apron at the rate of 2.25 litre of emulsion per metre of surface area complete all as specified and as directed.

Material and labour for Anti termite treating the soil under existing floor using emulsion at the rate of one litre of emulsion per hole, 300 mm apart including drilling and plugging 12 mm dia hole with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor complete all as specified and as directed.

Material and labour for PCC 1:3:6, type C-2 using 40mm graded mechanically crushed stone aggregates as in blocks to hold GI extension pipe for air termination rod including necessary form work complete all as specified and directed.

Material and labour for PCC 1:3:6, type C-2 using 40mm graded mechanically crushed stone aggregates as in surface channel and drain bases complete all as specified and directed.

Material and labour for 100 mm thick PCC 1:5:10, type E-2 using 40mm graded mechanically crushed stone aggregates as in sub base of floors complete all as specified and directed.

Material and labour for 40mm thick PCC 1:2:4 type B1 using 20 mm graded mechanically crushed stone aggregates as in floor finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for PCC 1:2:4 type B-0 using 12.5mm graded mechanically crushed stone aggregates as in padding on roof to maintain the required slope & finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

Material and labour for RCC 1:2:4 type B-1,nominal mix using 20 mm graded mechanically crushed stone aggregates as in bonding/locking of edges of tiles including weathering & slightly rounded or chamfered on edges and threating with & including necessary form work complete all as specified and as directed.

Material and labour for RCC 1:2:4 type B-1,nominal mix using 20 mm graded mechanically crushed stone aggregates as in lintel, shelves,coping , manhole cover, hold fast block etc including necessary form work complete all as specified and as directed.

Material and labour for 75mm thick PCC (1:3:6) type C-1 using 20mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10mm wide, 30mm deep joints at the rate of 3.00 mt centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as specified and as directed. Notes :- (i) The unit rate quoted shall be deemed to include for providing the concrete in alternate bays not exceeding 3 Mtrs length,12 mm wide. (ii) 50 mm deep joints between the bays shall be provided which shall be filled with mastic filling with hot bitumen 85/25 grade and 1:2 mix volume.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement, including forms, moulds, mitred/ stopped ends etc.

Material & Labour for repair to chajjas/ roof projection with plain cement concrete 1:2:4 type B-0 using 12.5 mm graded mechanically crushed stone aggregates and dubbing out with 20 mm avereage thickness including necessary form work after taking down/ demolition of loose portion/ part/ particles & rendering with 5 mm thick in cement mortar 1:3 and finishing the exposed surfaces even & smooth using extra cement complete all as specified and as directed.

Material and labour for Brick work with sub class B bricks of old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for Brick work straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 using old bricks retrieved from srl No 06 hereinbefore after cleaning and washing complete all as specified and as directed.

Material and labour for Brick work with sub class B bricks of old size, straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and as directed.

Material and labour for 40 mm thick brick tiles laid on roofs, jointed and grouted flush in CM 1:3 mixed with linseed/crude oil @ 5% by weight of cement over and included 15 mm thick screed bedding in cement mortar 1:6 complete all as specified and as directed.

Material and labour for Brick tiles laid on roofs using old tiles retrieved from srl No. 07 here-in-before after cleaning and washing , jointed and grouted flush in CM 1:3 mixed with linseed/crude oil @ 5% by weight of cement over and included 15 mm thick screed bedding in cement mortar 1:6 complete all as specified and as directed.

Material and labour for coloured, non- skid joint free,edge cut, ceramic tiles,of any tint,1st quality, 10 mm thick ,square/ rectangular, area of each tile exceeding 0.09 but not exceeding 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or bedding layers in Cement Mortar 1:4, complete all as specified and directed.

Material and labour for coloured, non- skid joint free,edge cut, ceramic vetrified tiles,nano series,of any tint,1st quality, 10 mm thick ,square/ rectangular, area of each tile not exceeding 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or bedding layers in Cement Mortar 1:4, complete all as specified and directed.

Material and labour for coloured, non- skid joint free,edge cut, ceramic vetrified tiles,nano series,of any tint,1st quality, 10 mm thick ,square/ rectangular, area of each tile not exceeding 0.36 Sqm on vertical surfaces as in skirting/ dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in Cement Mortar 1:4 complete all as specified and as directed.

Material and labour for jointfree glazed designer ceramic coloured tiles of size 300x450x7-8 mm thick on vertical surface as in skirting/dado, set and jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 on brick / concrete walls complete all as specified and as directed. Notes for item No 39 to 42 :- (i) The rates includes for all straight cutting and waste including raking or circular cutting complete. (ii) All corners in wall tiling should be properly metred jointed to give monolithic uniform apprearance. (iii) The rates for tiling includes for laying to any pattern with one or more colour as directed. (iv) If tiles of different sizes are used then no price adusjtment shall be made.

Material and labour 18-20 mm thick pre-polished granite stone slab of approved shade and colour as in kitchen slab/platform, steps, cills etc including vertical projection, rounding or chamferring the edge laid over and including screed bed 20mm thick in CM 1:6 jointing , pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite and rubbing polish to achieve mirror finish complete all as specified and directed.

Material and labour for machine cut Kota stone slab 18 to 20 mm thick (minimum size 30cmx 45cm) as in flooring, laid over and including screed bed 20 mm thick in cement mortar 1:6 set and jointed with grey cement slurry or with adhesive as per manufacturers instructions mixed with pigment to match the shade of the slab including rubbing and granite polishing achieve mirror finish complete all as specified and as directed.

Material and labour 60mm thick PCC M-25 rubber moulded double glossy interlocking designer paver blocks with crushing strength not less than 250 Kg per Sqcm over and including 25mm thick sand cushioning complete all as specified and as directed.

Material and labour for cement concrete chequered tiles 20cm X 20cm X 25 mm thick with grey cement and pigment, machine pressed, factory made, set, jointed and pointed in neat cement slurry in floors over and including screed bed 20 mm thick in cement mortar 1:6 finished even and fair complete all as specified and as directed..

Material and labour for rendering 15 mm thick in CM 1:6 finished even and smooth without using extra cement on fair faces brick or concrete surfaces complete all as specified and directed.

Material and labour for rendering 15 mm thick in CM 1:4 mixed with WPC @ 2 % by weight of cement finished even and smooth without using extra cement on fair faces brick or concrete surfaces complete all as specified and directed. Note : WPC shall be measured and paid separately as supply only.

Material and labour for rendering 5 mm thick in CM 1:3 on the soffits of slab/chajjas/sunshade etc finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and as directed.

Supply and fixing Factory made solid PVC Chowkhat /Door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm thick rigid PVC foam sheet coloured, reinforced with 19x19mm MS square tube of 19 gauge including rubber gasket, PVC fasteners, screws, brackets as per SSR Part –II (2010) complete all as specified and as directed.

Supply and fixing second class hard wood glazed and skeleton shutter 35mm thick, factory made, open rebated and prepared to receive glass/guage etc, without sash bars, mitred and rebated, with edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/guage etc, sizes of stiles, rails etc as specified in Section 8, clause 8.24(a) of SSR part-I(2009) complete all as specified and as directed.

Supply and fixing 32mm thick flush shutter, factory made, solid core construction with block board and plywood face panel commercial type on both side complete all as specified and as directed.

Supply and fixing factory made solid panel PVC door shutter 30 mm thick consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification vide clause 8.34.2 of MES SSR Part I 2009 and Preambles 8B.2 of MES SSR Part II 2010, complete all as specified and as directed.

Supply and fixing 18/19 mm thick block board, grade 2 quality, interior grade, commercial type , fixed with screws to frame work as in cup board shelves and shutters after taking down/out board as existing at site complete all as specified and as directed.

Supply and fixing decorative laminates 0.9mm thick type 1 of any tint/design/pattern fixed with approved adhesive complete all as specified and as directed.

Supply and fixing 2nd class hard wood (sal) plain fillet, square/rectangular or tringular in section clean swan secured with nails or brads sectional area exc 13 sqcm but not exc 25 sqcm complete all as specified and as directed.

Supply and fixing Solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame with screws complete all as specified and as directed

Supply and fixing 5mm thick PVC sheet fillet square, rectangular or tringular in section,of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame secured with nails or brads complete all as specified and as directed.

Supply and fixing fancy type stainless steel curtain rod 20 mm bore with and including stainless steel bracket knobs (two nos for each cut length), funnel on ends (two nos for each cut length) and suitable PVC rings of 1st quality after taking down/out rod as existing at site complete all as specified and as directed.

Supply and fixing fancy type MS curtain rod 20 mm bore ,coloured powder coated of approved shade with and including MS powder coated bracket knobs (two nos for each cut length), funnel on ends (two nos for each cut length) and suitable PVC rings of 1st quality after taking down/out rod as existing at site complete all as specified and as directed.

Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or stainless steel wire staple complete all as specified and directed.

Supply and fixing in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or stainless steel wire staple complete all as specified and directed.

Hacking out old broken glass from metal or wooden frames including punching or drilling out old glazing pins/spring clips or with putty with and including providing and fixing 4mm thick sheet glass ordinary quality area not exceeding 0.50sqm each complete all as specified and as directed.

Supply and fixing 5mm thick tinted glass, pin head type glazing as in square exc 0.5 Sqm in each pane fixed with oil putty or wooden beads including provision of glazing pins/ spring clips wherever necessary complete all as specified and as directed.

Supply and fixing 4mm thick sheet glass ordinary quality and glazing with oil putty in square n-exc 0.50 sqm in each pane complete all as specified and as directed.

Supply and fixing butt hinges, medium weight cold rolled mild steel 100 mm size welded to angle iron frames or fixed with screws to wooden frames complete all as specified and as directed.

Supply and fixing aluminium handle, cast type anodised 150mm long, complete all as specified and as directed

Supply and fixing 200 mm long Aluminium anodized barrel tower bolt of extruded section complete all as specified and as directed.

Supply and fixing 150 mm long Aluminium anodized barrel tower bolt of extruded section complete all as specified and as directed.

Supply and fixing 300 mm long Aluminium anodized sliding door bolt with hasp , staple ,bolt type, fixing clips of sheet cast or extruded section & fixing bolts , sliding bolts of extruded section complete all as specified and as directed.

Supply and fixing aluminium anodized pressed type handle, D type of size 200mm, complete all as specified.

Supply and fixing 20mm dia cup board knob of mild steel bright finish, of approved quality with nuts & washers complete all as specified and directed

Supply and fixing mortice lock vertical type 100 mm size,brass, 4 levers with duplicate keys complete all as specified.

Supply and fixing continuous piano type hinge, mild steel bright finish or electro galvanised, width of flap 25/30mm when open complete all as specified and as directed.

Supply and fixing prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws after taking down sheet as existing at site complete all as specified and as directed.

Supply and fixing rolled mild steel work in tubular trusses including vertical member, rafter and purlin including special shaped washer etc using ERW or induction butt welded tubes conforming to IS 1161-1979 graded st- 240 including cutting to dead length, notching, drilling riveting and/or welding & connecting with nuts & bolts after taking down as existing at site complete all as specified and as directed.

Supply and fixing mild steel framed work as in door of angle or other sections with gusset plates, rails, braces etc, using ornamental design as approved complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and purpose made hinges or steel hanging door fittings exclusive of steel sheeting or other covering, running rails and guides and hanging, fastening and fixing complete conforming to Fe 410E, Gde E-250 complete all as specified and as directed. Note :- Flat iron hold fasts shall be measured & paid separately.

Supply and fixing pressed steel door frames of size 125 mm x 60 mm with one or more rebates including fixing necessary lugs, 3 Nos 100 mm long hinges per shutter ,lock strike plate etc. including making good the disturbed portion to match with existing complete all as specified and directed.

Supply and fixing factory made Box type steel window, double shutter (glazed and wire gauzed) with side hung shutters including box type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02 Nos for each leaf) duly welded, complete with glazing bars dovetailed or welded including MS fillets, including provision and welding of guard bars including one shop coat of red oxide primer over window, frame & guard bars complete all as specified and directed. Notes: - (i) Windows shall be fabricated as per HQ CE Chandigarh Zone drawing No. TD-219 Sh 1/3 to 3/3 dated 02 Jan 2007 with one amendment dated 22 Jun 07 in Sh 1/3 , dt 15 Jun 07 in sh 2/3 & 3/3 and these drgs may be referred from GE office or from the office of CWE (AF) Ambala. (ii) Glazing & Wire cloth shall be measured and paid separately as S&F and guard bars shall be measured and paid separately as Supply only. (iii) The term double shutter stated is meant for providing glazed shutter as well as wire gauged shutter on outside & inside of the frame respectively.

Supply only of MS work as in framed guard bar welded to window frame conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Supply and fixing steel ventilator with top hung shutters, factory made IS 1038-1983 & IS 7452 - 1990 including hinges, peg stays with glazing bars etc with & including one shop coat of red oxide primer complete all as specified and as directed. Notes: - Glass, wire gauge shall be measured & paid separately.

Material and labour for Mild steel TMT bars ,Fe 500 D, 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Supply and fixing galvanised mild steel water tubes 15 mm bore, medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and as directed.

Supply and fixing galvanised mild steel water tubes 20 mm bore, medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and as directed.

Supply and fixing anodised powder coated aluminium window shutters with chowkat made out of hollow aluminium section suitable for aluminium shutter and aluminium guard bar, each shutters having two nos aluminium hinges 100mm long, 100mm size aluminium handle, two nos 150mm long aluminium tower bolt,glazing with 5.00 mm thick glass fixed with glazing clips rubber beading and aluminium beading etc complete all as specified and as directed. (a) Chowkat size 100x44x1.60mm thick (b) All shutter member size 100x44x1.60mm thick Note:- The cost of fittings and fixtures,glass and beading etc are deemed to be included in quoted rates.

Supply and fixing anodized powder coated aluminium door made out hollow extruded aluminium sections ,each door having 02 Nos disk/D type handles 200mm long, 02 Nos aluminium tower bolt 200mm size, 1 no mortice lock 100 mm size of six levers with key in duplicate regulated by double action hydrolic floor door spring, 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass, shutter to be partly glazed with and including 5mm thick tinned glass and partly panelled with 12mm thick prelaminated particle board fixed with glazing clips rubber beading /gasket anodized aluminium beading screws complete all as specified and as directed. (a) Chowakat frame : 100 x44 x1.60 mm thick (b) Shutter verticle style : 100 x44 x1.60 mm thick (c) Shutter lock rail : 150 x44 x1.60 mm thick (d) Shutter Top rail : 100 x44 x1.60 mm thick (e) Shutter bottom rail : 200 x44 x1.60 mm thick Note:- The cost of fittings and fixtures,particle board, door spring, glass and beading etc are deemed to be included in quoted rates.

Supply and fixing anodized aluminium powder coated partition wall made out of aluminium anodized standard hollow section of size 100mm x 40mm x 1.6mm thick, snap fit beading rubber gasket, fixed with 5.5 mm thick glass or 12mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination & other side balancing light grey lamination with allaccessories complete all as specified and as directed. (i) Frame size of 100x45 x1.6 mm thick (ii) Horizontal & Vertical members 85x45x1.6mm thick Note:- The cost of fittings and fixtures, particle board, glass and beading etc are deemed to be included in quoted rates.

Supply and fixing powder coated anodised aluminium grill made of mesh size 100x100mm of bar 8mm dia using U channel 25x12mm fixed to aluminium frame work complete all as specified and as directed.

Running welding in repairs thickness of metal to be welded exc 6 but not exc 9 mm complete all as specified and as directed.

Supply and fixing in repairs vitreous china wash down water closet (Pedestal pattern) ,white, including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and aluminium hinging devices and EWC jet CP with 1 mtr long PVC connection pipe complete all as specified and as directed.

Supply and fixing vitreous china wall hung cascade classic type EWC of any tint with and including flushing cistern, CP jet spray with PVC pipe & nozzle, PVC seat cover with hinging device, health faucet, of same brand after taking down WC as existing at site complete all as specified and as directed. Make :- Parryware Cat Part No C0217 closet - s or equivalent of makes as specified.

Supply and fixing in repair PVC low level flushing cistern, white, valveless syphonic action type 10 lts capacity with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend and a pair of mild steel angle iron brackets of suitable size including making necessary connections to water supply pipe line and WC, complete all as specified and as directed.

Supply and fixing vitreous China bowl urinal, half stall,white ,with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement mortar 1:4 fixing automatic flushing cistern with PVC/MS brackets , flush pipe & waste pipe after taking down as existing at site complete all as specified and as directed.

Supply and fixing vitreous China bowl urinal, half stall,white ,with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement mortar 1:4 fixing automatic flushing cistern with PVC/MS brackets , flush pipe & waste pipe after taking down as existing at site complete all as specified and as directed. Make :- Jaquar Cat Part No URS-WHT-132530 or equivalent of makes as specified.

Supply and fixing vitreous China table top basin, triangular shape, size 600x410x100mm with all fittings after taking down as existing at site complete all as specified and as directed. Make :- Jaquar Cat Part No LYS-WHT-38901N or equivalent of makes as specified.

Supply and fixing for vitreous china urinal partition, white,of size 310mmx710 mm for urinal and making good complete all as specified and as directed

Supply and fixing sink with drainage board made of stainless steel 1.00 mm thick steel sheet, kitchen or laboratory with plug & chain, waste coupling, washers and 32 mm bore PVC waste pipe including bedding in cement mortar to dwarf wall or including fixing cantiliver MS/PVC brackets and connecting union to pipe over all size 1145 mmx510mm bowl size 560x410x 200mm after taking down sink as existing at site complete all as specified and as directed..

Supply and fixing stainless steel plate rack of size approx 750x 600x 250mm made out of 1.0 mm thick steel sheet after taking down sink as existing at site complete all as specified and as directed.

Supply and fixing rotational moulded polythene(PVC) water storage tank,HDPE, of white colour, triple layered ,cylinderical type fixed and hoisted in position on roof, at any height, of capacity 500 ltrs and making connections with 20 mm GI pipe inlets & outlets complete including locking arrangements and 20 mm bore ball brass valve high pressure with polyethylene float including taking down old tank as exist at site complete all as specified and directed.

Supply and fixing rotational moulded polythene(PVC) water storage tank,HDPE, of white colour, triple layered ,cylinderical type fixed and hoisted in position on roof, at any height, of capacity 1000 ltrs and making connections with 20 mm GI pipe inlets & outlets complete including locking arrangements and 20 mm bore ball brass valve high pressure with polyethylene float including taking down old tank as exist at site complete all as specified and directed.

Supply and fixing in repair vitreous china wash hand basin ,oval type, white, of size 550X490mm including 32mm bore PVC waste pipe and CP waste fitting and a pair of mild steel angle iron brackets of suitable size fixed in counter slab complete all as specified and as directed.

Supply and fixing in repair 15 mm dia pillar tap , fancy type, brass chromium plated with capstan head chromium plated screwed down high pressure with or without lettered “hot' or 'cold” with long screwed shank and flynut screwed complete all as specified and as directed.

Supply and fixing in repair concealed 15mm dia stop valves brass chromium plated (Concealed types) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe including cutting chases required for concealing complete all as specified and as directed.

Supply and fixing concealed 15mm dia stop valves reduced body brass chromium plated (Concealed types) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe including cutting chases required for concealing after taking down valve as existing at site complete all as specified and as directed. Make :- Jaquar Cat Part No ALD-CHR-069 or equivalent of makes as specified.

Supply and fixing angular stop cock 15mm dia brass long thread chromium plated after taking down valve as existing at site complete all as specified and as directed. Make :- Jaquar Cat Part No CON-CHR-053KN or equivalent of makes as specified.

Supply and fixing in repair stop valve 15mm bore, brass, screwed down high pressure with crutch or butterfly handle screwed both ends complete all as specified and as directed.

Supply and fixing in repair angle valve 15mm bore, brass, screwed down high pressure with crutch or butterfly handle screwed both ends complete all as specified and as directed.

Supply and fixing in repair bib taps 15 mm bore, brass, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and fixing bib taps 15 mm bore, brass, chromium plated, fancy type long body with wall flange , with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule after taking down tap as existing at site complete all as specified and as directed. Make :- Jaquar Cat Part No CON-CHR-107KN or equivalent of makes as specified.

Supply and fixing brass Chromium plated overhead shower rose 150mmx150mm square shape , fancy type,suitable for 15 mm bore pipe single flow ABS body with grey face plate with rubbit cleaning system alongwith shower arm with all other accessories after taking down/out as existing at site complete as specified and directed. Make :- Jaquar Cat Part No OHS-CHR-35495 or equivalent of makes as specified.

Supply and fixing brass chromium plated towel rail 20mm dia ,fancy type, 60cm long,superior quality , between flanges fixed to wall with brass CP screws after taking down/out as existing at site complete as specified and directed.

Supply and fixing brass chromium plated towel rail 20mm dia ,fancy type, 60cm long,superior quality , between flanges fixed to wall with brass CP screws after taking down/out as existing at site complete as specified and directed. Make :- Jaquar Cat Part No ACN-CHR-1111NM or equivalent of makes as specified.

Supply and fixing brass chromium plated towel ring fancy type square fixed with brass CP screws after taking down/out as existing at site complete as specified and directed. Make :- Jaquar Cat Part No ACN-CHR-1121N or equivalent of makes as specified.

Supply and fixing brass chromium plated 15mm bore fancy type central hole basin mixture without pop up waste system with 450mm long braided hoses after taking down/out as existing at site complete as specified and directed. Make :- Jaquar Cat Part No CON 167KNB or equivalent of makes as specified.

Supply and fixing brass chromium plated 15mm bore fancy type hot and cold wall mixture with telephonic shower after taking down/out as existing at site complete as specified and directed. Make :- Jaquar Cat Part No CON-CHR-267KN or equivalent of makes as specified.

Supply and fixing soap dish ,brass, chromium plated,size 160 x 160 x90 mm fixed with and including plugs with brass CP screws after taking down/out as existing at site complete all as specified and as directed.

Supply and fixing in repair cast copper alloy chromium plated toilet paper holder complete as specified and directed.

Supply and fixing in repair corner glass,fancy type 300x300mm, made of 6-7mm thick superior quality glass with brass bracket, railing and screwed complete all as specified and as directed.

Supply and fixing in repairs PVC connection 600mm long with 2 nos PTMT check nuts, suitable for 15mm bore complete all as specified and directed

Supply and fixing 75mm dia outlet, cast iron Nahani trap with CP grating including jointing to waste pipe after taking down/out trap as existing at site complete all as specified and as directed.

Material and labour for APP polymeric water proofing treatement to roof, at any height, using membrane minimum 3 mm thick and weighting not less than 3.6 kg/sqm , black finish reinforced with non-woven polyster matt weighting not less than 150 gms per sqm with thermo fusible finish laid by force application after applying compatible bitumen primer at the rate of 0.40 Ltr per Sqm, torching over laps with a propane or butane gas torch with a over lap of 100 mm at the side on transverse direction and 150 mm at the ends on longitudinal direction and sealing including a tack coat of hot blown bitumen 85/25 @ 1.2 Kg per sqm below APP complete all as specified and as directed . Notes:- (i) The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing. (ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee and shall be released after 10 years. However contractor may deposit the FDR of same amount in favour of GE. If contractor fail to rectify the defect pointed out during this period in writing, the defect shall be got rectified at contractor's risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. The contractor's quoted rates for this item shall deemed to be inclusive of this aspect.

Supply and fixing powder coated GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screw at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansin fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia GI wire (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia, 40 mm long , with and including 9 to 10 mm thick gypsum board ceiling tile / board for insulation and accoustic purpose of size 600 x 600 mm decorative type with silver foil coating on back side fixed with staple with on snap grid with nuts, bolts, adjustable arrangement & washers etc after taking down/out ceiling as existing at site complete all as specified and as directed.

Material and labour for three coats of white wash on newly plastered surfaces of walls/ceiling including preparation of surfaces complete all as specified and as directed.

Material and labour for One coat of white wash on old treated plastered surfaces of ceiling including preparation of surfaces complete all as specified and as directed.

Material and labour for One coat of white wash on old treated plastered surfaces of walls including preparation of surfaces complete all as specified and as directed.

Material and labour for two coats of external acrylic paint in camoflaging pattern of any tint/pattern over a coat of primer on newly plastered surfaces of walls including preparation of surfaces complete all as specified and as directed.

Material and labour for One coat of external acrylic paint in camoflaging pattern of any tint/pattern on old treated plastered surfaces of walls/RCC/Stone/concrete/Asbestos cement sheets/bkicks etc including preparation of surfaces complete all as specified and as directed.

Material and labour for two coats of Oil bound distemper of approved shade/tint over a coat of primer over JK/Birla white wall care putty of any thickness to achieve smooth finish on newly plastered surfaces of walls including preparation of surfaces complete all as specified and as directed.

Material and labour for two coats of plastic emulsion paint of approved shade/tint over a coat of primer over JK/Birla white wall care putty of any thickness to achieve smooth finish on newly plastered surfaces of walls including preparation of surfaces complete all as specified and as directed.

Material and labour for two coats of Oil bound distemper of approved shade/tint on old treated plastered surfaces of walls including preparation of surfaces complete all as specified and as directed.

Material and labour for One coat of Oil bound distemper of approved shade/tint on old treated plastered surfaces of walls including preparation of surfaces by scrapping down, filling with putty all holes and cracks complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint over one coat of red oxide primer on new steel and iron surfaces of walls or of any description including preparation of surface over 10cm width or girth complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint on new steel and iron surfaces of walls or of any description including preparation of surface over 10cm width or girth complete all as specified and as directed.

Material and labour for One coat of synthetic enamel paint on old treated steel and iron surfaces of walls/trusses/purlins/rafters/posts etc, of any description including preparation of surface over 10cm width or girth complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint over one coat of pink primer on new wood and wooden based surfaces, of any description including preparation of surface over 10cm width or girth complete all as specified and as directed.

Material and labour for preparation of old wood and wooden based surface and applying one coat of synthetic enamel paint, of surface over 10 cm width or girth, complete all as specified and directed.

Taking down carefully copper/aluminium point wiring light/fan/bell/socket or power complete fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc inluding taking down carefully by unscrewing from board/outlets/DBs/fittings etc such as switches,lamp holdes,brakets,ceiling fittings, bulkhead fittings,sketch fittings, tube light fittings, fan regulators,electric meters, meter bos any type etc and/or drawing out from existing conduit/batten and making good disturbed surfaces of walls/floors/ceilings complete all as specified and as directed .

Material and labour for concealed point wiring with (FRLS) Flame retardant low smoke PVC insulated unsheathed cable 1.5 sqmm with stranded copper conductor, drawn through/in and including non metallic rigid PVC concealed conduit not less than 20mm dia, medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with and including embedding sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness with decorative laminated sheet top cover 3 mm thick (Hylam) including (FRLS) Flame retardant low smoke PVC insulated multistranded copper earth conductor 1.50 sqmm connected to common earth and earth dolly one light/fan point controlled by one way switch 6 amp complete all as specified and as directed.

Material and labour for concealed point wiring with (FRLS) Flame retardant low smoke PVC insulated unsheathed cable 1.5 sqmm with stranded copper conductor, drawn through/in and including non metallic rigid PVC concealed conduit not less than 20mm dia, medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with and including embedding sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness with decorative laminated sheet top cover 3 mm thick (Hylam) including (FRLS) Flame retardant low smoke PVC insulated multistranded copper earth conductor 1.50 sqmm connected to common earth and earth dolly one light point controlled by two way switch 6 amp complete all as specified and as directed.

Material and labour for concealed point wiring with (FRLS) Flame retardant low smoke PVC insulated unsheathed cable 1.5 sqmm with stranded copper conductor, drawn through/in and including non metallic rigid PVC concealed conduit not less than 20mm dia, medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with and including embedding sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness with decorative laminated sheet top cover 3 mm thick (Hylam) including (FRLS) Flame retardant low smoke PVC insulated multistranded copper earth conductor 1.50 sqmm connected to common earth and earth dolly one 3 pin switch socket combination 6 amp on the independent board complete all as specified and as directed.

Material and labour for concealed point wiring with (FRLS) Flame retardant low smoke PVC insulated unsheathed cable 1.5 sqmm with stranded copper conductor, drawn through/in and including non metallic rigid PVC concealed conduit not less than 20mm dia, medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with provision of new sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness with decorative laminated sheet top cover 3 mm thick (Hylam) including (FRLS) Flame retardant low smoke PVC insulated multistranded copper earth conductor 1.50 sqmm connected to common earth and earth dolly one 3 pin switch socket combination 6 amp on the same board with other switches complete all as specified and as directed.

Material and labour for concealed point wiring with (FRLS) Flame retardant low smoke PVC insulated unsheathed cable 1.5 sqmm with stranded copper conductor,drawn through/in and including non metallic rigid PVC concealed conduit not less than 20mm dia, medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with and including embedding sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness with decorative laminated sheet top cover 3 mm thick (Hylam) including (FRLS) Flame retardant low smoke PVC insulated multistranded copper earth conductor 1.50 sqmm connected to common earth and earth dolly one bell point controlled by one bell push complete all as specified and as directed.

Material and labour for concealed point wiring with (FRLS) Flame retardant low smoke PVC insulated unsheathed cable 2.5 sqmm with stranded copper conductor, drawn through/in and including non metallic rigid PVC concealed conduit not less than 20mm dia, medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with and including embedding sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness with decorative laminated sheet top cover 3 mm thick (Hylam) including (FRLS) Flame retardant low smoke PVC insulated multistranded copper earth conductor 1.50 sqmm connected to common earth and earth dolly one 15/16 amp multipurpose socket combination on independent board complete all as specified and as directed. Note for srl No. 141 to 146:- (i) Switches, switch socket outlet, switch socket combination, bell push and fan regulator shall be measured and paid for separately. (ii) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match with the existing surfaces.

Material and labour for point wiring with (FRLS) Fire retardant low smoke PVC insulated unsheathed cable 1.5 sqmm with stranded copper conductor, drawn through and including non metallic PVC heavy grade, rigid casing & caping with fittings and fixing accessories such as tee,elbow,jointer,elbow corner etc on surfaces of walls / ceilings by means of cadmium plated screws and sunk / cup washers with and including embedding sunken type pressed steel terminal boxes, powder coated, of suitable size with decorative laminated sheet top cover 3 mm thick (Hylam)by using CP machine screws for housing of switch/fan regulators etc including (FRLS) Fire retardant low smoke,1100 volts grade PVC insulated copper earth conductor 1.50 sqmm connected to common earth and earth dolly for one light/fan point controlled by one switch complete all as specified and as directed .

Material and labour for point wiring with (FRLS) Fire retardant low smoke PVC insulated unsheathed cable 1.5 sqmm with stranded copper conductor, drawn through and including non metallic PVC heavy grade, rigid casing & caping with fittings and fixing accessories such as tee,elbow,jointer,elbow corner etc on surfaces of walls / ceilings by means of cadmium plated screws and sunk / cup washers with and including embedding sunken type pressed steel terminal boxes, powder coated, of suitable size with decorative laminated sheet top cover 3 mm thick (Hylam)by using CP machine screws for housing of switch/fan regulators etc including (FRLS) Fire retardant low smoke,1100 volts grade PVC insulated copper earth conductor 1.50 sqmm connected to common earth and earth dolly one 3 pin socket outlet 6 amp on the independent board complete all as specified and as directed.

Material and labour for point wiring with (FRLS) Fire retardant low smoke PVC insulated unsheathed cable 1.5 sqmm with stranded copper conductor, drawn through and including non metallic PVC heavy grade, rigid casing & caping with fittings and fixing accessories such as tee,elbow,jointer,elbow corner etc on surfaces of walls / ceilings by means of cadmium plated screws and sunk / cup washers with and including embedding sunken type pressed steel terminal boxes, powder coated, of suitable size with decorative laminated sheet top cover 3 mm thick (Hylam)by using CP machine screws for housing of switch/fan regulators etc including (FRLS) Fire retardant low smoke,1100 volts grade PVC insulated copper earth conductor 1.50 sqmm connected to common earth and earth dolly one 3 pin socket outlet 6 amp on the same board with other switches complete all as specified and as directed.

Material and labour for point wiring with (FRLS) Fire retardant low smoke PVC insulated unsheathed cable 2.5 sqmm with stranded copper conductor, drawn through and including non metallic PVC heavy grade, rigid casing & caping with fittings and fixing accessories such as tee,elbow, jointer, elbow corner etc on surfaces of walls / ceilings by means of cadmium plated screws and sunk / cup washers with and including embedding sunken type pressed steel terminal boxes powder coated of suitable size with decorative laminated sheet top cover 3 mm thick (Hylam)by using CP machine screws for housing of switch/fan regulators etc including (FRLS) Fire retardant low smoke,1100 volts grade PVC insulated copper earth conductor 1.50 sqmm connected to common earth and earth dolly for 3/6 pin 15 Amps socket outlet on independent board complete all as specified and as directed. Notes for item Nos 147 to 150 :- (i) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match the existing surface. (ii) Switches, Socket outlet and fan regulators shall be measured and paid separately.

Supply and fixing switch piano, flush type 6 amp, single pole, one way 240 volt complete all as specified and directed.

Supply and fixing switch piano, flush type 6 amp, single pole, two way 240 volt complete all as specified and directed.

Supply and fixing switch piano, flush type 15/16 amp, single pole, one way 240 volt complete all as specified and directed.

Supply and fixing socket outlet, 2 in 1 , 5 pin, 5 amps flush type complete all as specified and as directed.

Supply and Fixing socket outlet, 2 in 1 , 5 pin, 5/15 amps flush type complete all as specified and as directed.

Supply and fixing ceiling rose surface bakelite, 65X50 mm three terminals ,230 volts,ISI mark complete all as specified and as directed.

Supply & fixing lamp holder PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed.

Supply and fixing bell push single pole one way 5 Amp, 240 volt flush type complete all as specified and as directed..

Supply and Fixing call bell ding dong, 230 Volts, single phase complete all as specified and as directed.

Supply and Fixing electronic fan regulator stepped type,SP 240 volts grade 350 watts heavy duty including making necessary connections to make it functional complete all as specified and as directed.

Supply and fixing in replacement MCB, SPN, 5 to 40 Amps, B curve, 10 kA capacity, 240 volts finger proof terminal , bi-connect terminal label holder 35 Sqmm terminal capacity including sliding shutter large two position dolly to be fixed DBs complete all as specified and as directed.

Supply and fixing in replacement MCB, SP, 5 to 40 Amps, B curve, 10 kA capacity, 240 volts finger proof terminal , bi-connect terminal label holder 35 Sqmm terminal capacity including sliding shutter large two position dolly to be fixed DBs complete all as specified and as directed.

Supply and fixing in replacement MCCB, TPN 63Amps, 10 kA capacity, 415 volts with fixed and thermal magnetic setting complete all as specified and as directed.

Supply and fixing in replacement MCCB, TPN 125 Amps, 16 kA capacity, 415 volts with fixed and thermal magnetic setting complete all as specified and as directed.

Supply and fixing in replacement sheet metal enclosures with socket plug top and MCBs with a two pin and earth plug and socket with one single pole MCB 20 Amp, 'B' curve 240 volts, 10 kA complete all as specified and as directed.

Supply and fixing in replacement sheet metal enclosure for MCB DBs,230 volts, single pole and neutral with 200 Amps rated bus bar 4 way double door type flushed inside the wall including making good the disturbed surfaces complete all as specified and as directed.

Supply and fixing in replacement sheet metal enclosure for MCB DBs,230 volts, single pole and neutral with 200 Amps rated bus bar 12 way double door type flushed inside the wall including making good the disturbed surfaces complete all as specified and as directed.

Supply and fixing in replacement sheet metal enclosure forTPN DB with incomer +24 module outgoing, load line with provision of MCCB 125 Amps,4 pole, incomer double door, IP43 protection as per IS 8623-III,with 160 Amp rated bus bar,8 ways blanking plates,double door type flushed inside the wall including making good the disturbed surfaces complete all as specified and as directed.

Supplying & laying for replacement of sub main wiring with two single core FRLS,PVC insulated cable,1100 volts grade, 4 sqmm nominal cross sectional area stranded copper conductor and one single core green FRLS, PVC insulated 2.5 sqmm stranded copper conductor earth continuity cable drawn through with and including non metallic rigid PVC conduit medium grade not less than 25mm bore including accessories concealed in wall/floors/roof etc including cutting chases in wall/ceiling and making good the disturbed surfaces to match of wall/ceiling by plastering & applying two coats of distempering complete all as specified and as directed.. Note :- Two runs of 4 sqmm cable alongwith One run of 2.5 sqmm cable as earth wire with conduit shall be measured as one length.

Supplying & laying for replacement of sub main wiring with two single core FRLS,PVC insulated cable,1100 volts grade, 6 sqmm nominal cross sectional area stranded copper conductor and one single core green FRLS, PVC insulated 4 sqmm stranded copper conductor earth continuity cable drawn through with and including non metallic rigid PVC conduit medium grade not less than 25 mm bore including accessories concealed in wall/floors/roof etc including cutting chases in wall/ceiling and making good the disturbed surfaces to match of wall/ceiling by plastering & applying two coats of distempering complete all as specified and as directed.. Note:- Two runs of 6 sqmm cable alongwith one run of 4 sqmm cable as earth wire with conduit shall be measured as one length.

Supplying, laying, jointing, testing and commissioning under ground XLPE LT electric cable 1100 Volts grade, heavy duty, PVC insulated and sheathed armoued electric power cable with stranded aluminium conductor, of cross sectional area 10 Sqmm 4 core conforming to IS- 7098 (Part I) 1988 as in trenches over brick and sand cushioning or along the wall/pole through pipe etc served with an inner sheathing of PVC tape and overall PVC sheathed armoured with galvanized steel wire or tape including taking down of old cable as existing at site complete all as specified and as directed.

Supplying, laying, jointing, testing and commissioning under ground XLPE LT electric cable 1100 Volts grade, heavy duty, PVC insulated and sheathed armoued electric power cable with stranded aluminium conductor, of cross sectional area 50 Sqmm 3.5 core conforming to IS- 7098 (Part I) 1988 as in trenches over brick and sand cushioning or along the wall/pole through pipe etc served with an inner sheathing of PVC tape and overall PVC sheathed armoured with galvanized steel wire or tape including taking down of old cable as existing at site complete all as specified and as directed.

Supplying, laying, jointing, testing and commissioning under ground electric cable XLPE 1100 Volts grade, heavy duty, PVC insulated screened PVC beeded GI steel strip armoued electric power cable with stranded aluminium conductor, of cross section area 70 Sqmm 3.5 core as in trenches over brick and sand cushioning or along the wall/pole through pipe etc served with an inner sheathing of PVC tape and overall PVC sheathed armoured with galvanized steel wire or tape including taking down of old cable as existing at site complete all as specified and as directed.

Supplying, laying, jointing, testing and commissioning under ground XLPE LT electric cable 1100 Volts grade, heavy duty, PVC insulated and sheathed armoued electric power cable with stranded aluminium conductor, of cross sectional area 120 Sqmm 3.5 core conforming to IS- 7098 (Part I) 1988 as in trenches over brick and sand cushioning or along the wall/pole through pipe etc served with an inner sheathing of PVC tape and overall PVC sheathed armoured with galvanized steel wire or tape including taking down of old cable as existing at site complete all as specified and as directed.

Supplying, laying, jointing, testing and commissioning under ground electric cable XLPE 1100 Volts grade, heavy duty, PVC insulated screened PVC beeded GI steel strip armoued electric power cable with stranded aluminium conductor, of cross section area 150 Sqmm 3.5 core as in trenches over brick and sand cushioning or along the wall/pole through pipe etc served with an inner sheathing of PVC tape and overall PVC sheathed armoured with galvanized steel wire or tape including taking down of old cable as existing at site complete all as specified and as directed. Note for Ser No 171 & 175:- Excavation & earth work, sand cushioning, protection pipes, end termination joints & protection covers shall be measured and paid separately.

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation etc or for walls, shafts, manholes not exc 10 Sqm on plan or for laying pipes/cables etc and getting out, in soft/loose soil complete all as directed

Returning filling in including spreading leveling watering and well ramming in layers not exc 25 cm thick each complete all as specified and as directed.

Removal of surplus soil to a distance not exc 500 mtrs & depositing where directed at a level not exc 1.5 mtrs above the starting point complete all as specified and as directed.

Material and labour for Sand cushioning to cable with a layer of sand 8 cm deep before laying the cable and 15 cms deep after the cable (punned down to 18 cms depth after laying and stretching of cable ) complete all as specified and as directed.

Supply and laying sub class 'B' bricks old sizes over the underground HT/LT cable, laid dry & flat abutting each other with width equal to length of bricks for protection of cable after taking down cover as exising at site complete all as specified and as directed.

Boring to existing road/path/hardstanding/taxi track etc by trenchless technology using ultra sounding technique and necessary machine for passing pipe upto 50 mm bore for passing cable including making good the disturbed surfaces and removal of debries to distance n.exc 500 mtr complete all as specified and as directed.

Boring to existing road/path/hardstanding/taxi track etc by trenchless technology using ultra sounding technique and necessary machine for passing pipe above 50 mm to upto 80 mm bore for passing cable including making good the disturbed surfaces and removal of debries to distance n.exc 500 mtr complete all as specified and as directed.

Supply and fixing GI pipe 40 mm bore , light grade as in floor, fixed to wall with fixing arrangement along the pole, under floor etc including taking down of old pipe complete all as specified and as directed .

Supply and fixing GI pipe 50 mm bore , light grade as in trenches, under road, fixed to wall, with fixing arrangement along the pole, under floor etc including taking down of old pipe complete all as specified and as directed .

Supply and fixing GI pipe 80 mm bore , light grade as in trenches, under road, fixed to wall, with fixing arrangement along the pole, under floor etc including taking down of old pipe complete all as specified and as directed . Note for Ser No 183 to 185 :- Excavation and earth work if required shall be measured and paid separately.

Supply and fixing in replacement end jointing kit for 1100 Volts earthed grade cable for indoor/outdoor type termination heat shrinkable type joints with jointing material and accessories for 3 core XLPE armoured aluminium conductor cable of size 150 Sq mm including cutting complete all as specified and as directed.

Supply and fixing in replacement end jointing kit for 1100 Volts earthed grade cable for indoor/outdoor type termination heat shrinkable type joints with jointing material and accessories for 3 core XLPE armoured aluminium conductor cable of size 120 Sq mm including cutting complete all as specified and as directed.

Supply and fixing in replacement end jointing kit for 1100 Volts earthed grade cable for indoor/outdoor type termination heat shrinkable type joints with jointing material and accessories for 4 core XLPE armoured aluminium conductor cable of size 50-70 Sq mm including cutting complete all as specified and as directed.

Supply and fixing in replacement end jointing kit for 1100 Volts earthed grade cable for indoor/outdoor type termination heat shrinkable type joints with jointing material and accessories for 4 core XLPE armoured aluminium conductor cable of size 10-16 Sq mm including cutting complete all as specified and as directed.

Supply and fixing air freshner PVC body, 220/230 mm sweep, single phase, 230 volts with & including louvers and making necessary connections from celing rose with twin core twisted flexible copper conductor cable of suitable size to make it functional after taking down/out air freshner as existing at site complete all as specified and as directed.

Taking down carefully ceiling fan of any make/sweep, from any position/place after disconnecting electric connections & refixing the same after completion of building repair works duly overhauling ,spray painting with one coat of white synthetic enamel paint & writing MES No with black paint and making necessary connections from ceiling rose with twin core twisted flexible copper conductor cable of suitable size to make it functional complete all as specified and as directed.

Taking down/out existing LT panel 1.2x1.6 Mts size of any make, from any position/place after disconnecting electric connections and refixing the same at the same or other location by providing brick work & PCC foundation and making necessary connections to make it functional complete all as specified and as directed. Note :- Excavation & earth wirk, Brick work & PCC shall be measured & apid seperetely.

Supply and fixing in replacement LED tube light fitting 1x18 watt fitting, 230 volts in commmercial channel with powder coated CRCA sheet housing with opal acrylic diffuser for LED with & including LED tubelight with high efficient LED18 watts in aluminium housing with clear & milky diffuser including connecting with twin core twisted flexible copper conductor cable of suitable size and making necessary connection to make it functional complete all as specified and as directed. Note:- LED fitting should have PF 0.9,CRI>70,L70.

Supply and fixing in replacement indoor decorative LED batten with opal diffuser with inbuilt LED tube 10 watts and driver designed with high transmitting optics for even light distribution IP20 degree protection having length 620mm including connecting with twin core twisted flexible copper conductor cable of suitable size and making necessary connection to make it functional complete all as specified and as directed. Note:- LED fitting should have PF 0.9,CRI>70,L70.

Supply and fixing in replacement recessed/surface mounting LED flat panel 2 feet x 2 feet with high efficient LED with and including glare free full window opal diffusal 36 watts with and including LED lamp including connecting with twin core twisted flexible copper conductor cable of suitable size and making necessary connection to make it functional complete all as specified and as directed.

Supply and fixing 45 watt LED security light fitting with not less than 100 lumen/watt delivered lumen efficacy supported with LM-79/80, cast alluminium alloy housing IP 66 protection, input voltage range 120-270 volts auto cut off at voltage exceeding 300 volts, autopower on after cutt off with time delay of less than 60 seconds, power factor more than 0.95, surge protection 5 KV internal and 10 KV external, driver current not exceeding 700 mA, driver electrical efficiency not less than 85% at constant current delivery, with secondary optic lense for every LED, with name of manufacturer / logo clearly embossed on housing of every fitting, LED CCT 5700+300 ANSI BIN, with and including GI bracket made out of 40 mm bore pipe light grade of length not less than 1.5 mtr with one bend, including taking down existing light fittings complete all as directed and specified.

Supply and fixing GI strip 25x4 mm with saddles and fixing screws etc for underground and upto test point mounted on PVC/porcelain insulator and brazed at each point after taking down/out strip as existing at site complete all as specified and as directed. Note :- Strip should be brazed/welded at each joint

Supply and fixing aluminium strip 25x3 mm with saddles and fixing screws etc for underground and upto test point mounted on PVC/porcelain insulator and brazed at each point after taking down/out strip as existing at site complete all as specified and as directed. Note :- Strip should be brazed/welded at each joint

Supply and fixing air termination aluminium rod single pointed 12 mm dia, 300mm long with and including fixing base plate with insulator on the top roof after taking down/out rod as existing at site complete all as specified and as directed.

Material and labour for earthing complete with galvanized steel earth plate 60 cm X 60 cm X 6 mm thick buried vertically in ground to depth not less than 2.25 metres below ground level, with top edge of earth plate not less than 1.5 m below ground level, connected to earth lead GI strip 32x6 mm upto 7.5 mtrs long by means of bolts, nuts, check nuts and washers of galvanized iron and connection to earthing test point & earth dolly including watering pipe GI 20 mm bore, light grade, including protection pipe GI medium grade 15mm bore for earthing lead, wire mesh, funnel,lugs, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1, precast RCC cover slab 50 mm thick 1:2:4 type B-1 using XPM reinforcement weighing not less 4kg/sqm in lieu of CI cover with CI frame all as shown in electrical plate No 3 of SSR part-I (2009), including testing on completion including taking down of existing earthing as exists on site all as specified and as directed.

Material and labour for earthing complete with galvanized steel earth plate 60 cm X 60 cm X 6 mm thick buried vertically in ground to depth not less than 2.25 metres below ground level, with top edge of earth plate not less than 1.5 m below ground level, connected to earth lead GI wire 4 mm dia upto 7.5 mtrs long by means of bolts, nuts, check nuts and washers of galvanized iron and connection to earthing test point & earth dolly including watering pipe GI 20 mm bore, light grade, including protection pipe GI medium grade 15mm bore for earthing lead, wire mesh, funnel,lugs, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1, precast RCC cover slab 50 mm thick 1:2:4 type B-1 using XPM reinforcement weighing not less 4kg/sqm in lieu of CI cover with CI frame all as shown in electrical plate No 3 of SSR part-I (2009), including testing on completion including taking down of existing earthing as exists on site all as specified and as directed. Notes for Ser No 201 & 202:-- (i) Any variation in length of earth lead and protection pipe of earth lead shall be adjusted through DO. (ii) On testing if the earth resistance is not obtained, earthing will be generated at NO extra cost ,till the desired earth resistance is obtained.

Deduction of Total of Sch of credit amount Rs 168980.00

Bairagi Builders

amtoindia

Gupta Enterprises

Puneet Sharma